diff options
Diffstat (limited to 'drivers/i2c/chips/Kconfig')
| -rw-r--r-- | drivers/i2c/chips/Kconfig | 117 |
1 files changed, 104 insertions, 13 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 74d23cfce2a..a0982da0980 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -1,5 +1,5 @@ # -# I2C Sensor device configuration +# I2C Sensor and "other" chip configuration # menu "Hardware Sensors Chip support" @@ -11,7 +11,7 @@ config I2C_SENSOR config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select I2C_SENSOR help If you say yes here you get support for Analog Devices ADM1021 @@ -29,6 +29,7 @@ config SENSORS_ADM1025 help If you say yes here you get support for Analog Devices ADM1025 and Philips NE1619 sensor chips. + This driver can also be built as a module. If so, the module will be called adm1025. @@ -38,6 +39,8 @@ config SENSORS_ADM1026 select I2C_SENSOR help If you say yes here you get support for Analog Devices ADM1026 + sensor chip. + This driver can also be built as a module. If so, the module will be called adm1026. @@ -48,9 +51,21 @@ config SENSORS_ADM1031 help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. + This driver can also be built as a module. If so, the module will be called adm1031. +config SENSORS_ADM9240 + tristate "Analog Devices ADM9240 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM9240, + Dallas DS1780, National Semiconductor LM81 sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm9240. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on I2C && EXPERIMENTAL @@ -62,6 +77,19 @@ config SENSORS_ASB100 This driver can also be built as a module. If so, the module will be called asb100. +config SENSORS_ATXP1 + tristate "Attansic ATXP1 VID controller" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Attansic ATXP1 VID + controller. + + If your board have such a chip, you are able to control your CPU + core and other voltages. + + This driver can also be built as a module. If so, the module + will be called atxp1. + config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" depends on I2C && EXPERIMENTAL @@ -97,7 +125,7 @@ config SENSORS_FSCPOS config SENSORS_GL518SM tristate "Genesys Logic GL518SM" - depends on I2C && EXPERIMENTAL + depends on I2C select I2C_SENSOR help If you say yes here you get support for Genesys Logic GL518SM @@ -119,7 +147,7 @@ config SENSORS_GL520SM config SENSORS_IT87 tristate "ITE IT87xx and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select I2C_SENSOR help If you say yes here you get support for ITE IT87xx sensor chips @@ -143,7 +171,7 @@ config SENSORS_LM63 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM75 @@ -174,8 +202,7 @@ config SENSORS_LM78 select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM78, - LM78-J and LM79. This can also be built as a module which can be - inserted and removed while the kernel is running. + LM78-J and LM79. This driver can also be built as a module. If so, the module will be called lm78. @@ -208,7 +235,7 @@ config SENSORS_LM85 select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM85 - sensor chips and clones: ADT7463 and ADM1027. + sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. This driver can also be built as a module. If so, the module will be called lm85. @@ -307,14 +334,14 @@ config SENSORS_SMSC47M1 help If you say yes here you get support for the integrated fan monitoring and control capabilities of the SMSC LPC47B27x, - LPC47M10x, LPC47M13x and LPC47M14x chips. + LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips. This driver can also be built as a module. If so, the module will be called smsc47m1. config SENSORS_VIA686A tristate "VIA686A" - depends on I2C && PCI && EXPERIMENTAL + depends on I2C && PCI select I2C_SENSOR select I2C_ISA help @@ -326,7 +353,7 @@ config SENSORS_VIA686A config SENSORS_W83781D tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" - depends on I2C && EXPERIMENTAL + depends on I2C select I2C_SENSOR help If you say yes here you get support for the Winbond W8378x series @@ -360,22 +387,47 @@ config SENSORS_W83627HF This driver can also be built as a module. If so, the module will be called w83627hf. +config SENSORS_W83627EHF + tristate "Winbond W83627EHF" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get preliminary support for the hardware + monitoring functionality of the Winbond W83627EHF Super-I/O chip. + Only fan and temperature inputs are supported at the moment, while + the chip does much more than that. + + This driver can also be built as a module. If so, the module + will be called w83627ehf. + endmenu menu "Other I2C Chip support" depends on I2C config SENSORS_DS1337 - tristate "Dallas Semiconductor DS1337 Real Time Clock" + tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock" depends on I2C && EXPERIMENTAL select I2C_SENSOR help If you say yes here you get support for Dallas Semiconductor - DS1337 real-time clock chips. + DS1337 and DS1339 real-time clock chips. This driver can also be built as a module. If so, the module will be called ds1337. +config SENSORS_DS1374 + tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Dallas Semiconductor + DS1374 real-time clock chips. + + This driver can also be built as a module. If so, the module + will be called ds1374. + config SENSORS_EEPROM tristate "EEPROM reader" depends on I2C && EXPERIMENTAL @@ -399,6 +451,16 @@ config SENSORS_PCF8574 This driver can also be built as a module. If so, the module will be called pcf8574. +config SENSORS_PCA9539 + tristate "Philips PCA9539 16-bit I/O port" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Philips PCA9539 + 16-bit I/O port. + + This driver can also be built as a module. If so, the module + will be called pca9539. + config SENSORS_PCF8591 tristate "Philips PCF8591" depends on I2C && EXPERIMENTAL @@ -431,6 +493,23 @@ config ISP1301_OMAP This driver can also be built as a module. If so, the module will be called isp1301_omap. +# NOTE: This isn't really OMAP-specific, except for the current +# interface location in <include/asm-arm/arch-omap/tps65010.h> +# and having mostly OMAP-specific board support +config TPS65010 + tristate "TPS6501x Power Management chips" + depends on I2C && ARCH_OMAP + default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK + help + If you say yes here you get support for the TPS6501x series of + Power Management chips. These include voltage regulators, + lithium ion/polymer battery charging, and other features that + are often used in portable devices like cell phones and cameras. + + This driver can also be built as a module. If so, the module + will be called tps65010. + + config SENSORS_M41T00 tristate "ST M41T00 RTC chip" depends on I2C && PPC32 @@ -440,4 +519,16 @@ config SENSORS_M41T00 This driver can also be built as a module. If so, the module will be called m41t00. +config SENSORS_MAX6875 + tristate "MAXIM MAX6875 Power supply supervisor" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the MAX6875 + EEPROM-Programmable, Hex/Quad, Power-Suppy Sequencers/Supervisors. + + This provides a interface to program the EEPROM and reset the chip. + + This driver can also be built as a module. If so, the module + will be called max6875. + endmenu |