aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig25
-rw-r--r--drivers/ide/ide-disk.c8
-rw-r--r--drivers/ide/ide-io.c5
-rw-r--r--drivers/ide/ide-iops.c1
-rw-r--r--drivers/ide/ide-probe.c51
-rw-r--r--drivers/ide/ide.c1
-rw-r--r--drivers/ide/pci/aec62xx.c15
-rw-r--r--drivers/ide/pci/hpt366.c4
-rw-r--r--drivers/ide/pci/it821x.c2
-rw-r--r--drivers/ide/pci/pdc202xx_new.c6
-rw-r--r--drivers/ide/pci/pdc202xx_old.c15
-rw-r--r--drivers/ide/pci/piix.c4
-rw-r--r--drivers/ide/pci/sgiioc4.c9
13 files changed, 50 insertions, 96 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1c81174595b..d633081fa4c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -52,9 +52,9 @@ config IDE
if IDE
-config IDE_MAX_HWIFS
+config IDE_MAX_HWIFS
int "Max IDE interfaces"
- depends on ALPHA || SUPERH
+ depends on ALPHA || SUPERH || IA64
default 4
help
This is the maximum number of IDE hardware interfaces that will
@@ -162,8 +162,8 @@ config BLK_DEV_IDECS
tristate "PCMCIA IDE support"
depends on PCMCIA
help
- Support for outboard IDE disks, tape drives, and CD-ROM drives
- connected through a PCMCIA card.
+ Support for Compact Flash cards, outboard IDE disks, tape drives,
+ and CD-ROM drives connected through a PCMCIA card.
config BLK_DEV_IDECD
tristate "Include IDE/ATAPI CDROM support"
@@ -267,7 +267,7 @@ config IDE_TASK_IOCTL
help
This is a direct raw access to the media. It is a complex but
elegant solution to test and validate the domain of the hardware and
- perform below the driver data recover if needed. This is the most
+ perform below the driver data recovery if needed. This is the most
basic form of media-forensics.
If you are unsure, say N here.
@@ -525,7 +525,7 @@ config BLK_DEV_CS5520
tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
depends on EXPERIMENTAL
help
- Include support for PIO tuning an virtual DMA on the Cyrix MediaGX
+ Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
5510/5520 chipset. This will automatically be detected and
configured if found.
@@ -662,7 +662,7 @@ config PDC202XX_BURST
It was originally designed for the PDC20246/Ultra33, whose BIOS will
only setup UDMA on the first two PDC20246 cards. It has also been
- used succesfully on a PDC20265/Ultra100, allowing use of UDMA modes
+ used successfully on a PDC20265/Ultra100, allowing use of UDMA modes
when the PDC20265 BIOS has been disabled (for faster boot up).
Please read the comments at the top of
@@ -673,13 +673,6 @@ config PDC202XX_BURST
config BLK_DEV_PDC202XX_NEW
tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
-# FIXME - probably wants to be one for old and for new
-config PDC202XX_FORCE
- bool "Enable controller even if disabled by BIOS"
- depends on BLK_DEV_PDC202XX_NEW
- help
- Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
-
config BLK_DEV_SVWKS
tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
help
@@ -722,7 +715,7 @@ config BLK_DEV_SIS5513
config BLK_DEV_SLC90E66
tristate "SLC90E66 chipset support"
help
- This driver ensures (U)DMA support for Victroy66 SouthBridges for
+ This driver ensures (U)DMA support for Victory66 SouthBridges for
SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
The nice thing about it is that you can mix Ultra/DMA/PIO devices
and it will handle timing cycles. Since this is an improved
@@ -1060,7 +1053,7 @@ config IDEDMA_IVB
in that mode with an 80c ribbon.
If you are experiencing compatibility or performance problems, you
- MAY try to answering Y here. However, it does not necessarily solve
+ MAY try to answer Y here. However, it does not necessarily solve
any of your problems, it could even cause more of them.
It is normally safe to answer Y; however, the default is N.
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index ca25f9e3d0f..6c60a9d2afd 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -776,7 +776,7 @@ static void update_ordered(ide_drive_t *drive)
ide_id_has_flush_cache_ext(id));
printk(KERN_INFO "%s: cache flushes %ssupported\n",
- drive->name, barrier ? "" : "not");
+ drive->name, barrier ? "" : "not ");
if (barrier) {
ordered = QUEUE_ORDERED_DRAIN_FLUSH;
@@ -889,11 +889,7 @@ static void idedisk_setup (ide_drive_t *drive)
if (drive->id_read == 0)
return;
- /*
- * CompactFlash cards and their brethern look just like hard drives
- * to us, but they are removable and don't have a doorlock mechanism.
- */
- if (drive->removable && !(drive->is_flash)) {
+ if (drive->removable) {
/*
* Removable disks (eg. SYQUEST); ignore 'WD' drives
*/
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 8d50df4526a..c01615dec20 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -55,8 +55,8 @@
#include <asm/io.h>
#include <asm/bitops.h>
-int __ide_end_request(ide_drive_t *drive, struct request *rq, int uptodate,
- int nr_sectors)
+static int __ide_end_request(ide_drive_t *drive, struct request *rq,
+ int uptodate, int nr_sectors)
{
int ret = 1;
@@ -91,7 +91,6 @@ int __ide_end_request(ide_drive_t *drive, struct request *rq, int uptodate,
return ret;
}
-EXPORT_SYMBOL(__ide_end_request);
/**
* ide_end_request - complete an IDE I/O
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index af7af958ab3..b72dde70840 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -1243,6 +1243,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
*/
if (stat == 0xff)
return -ENODEV;
+ touch_softlockup_watchdog();
}
return -EBUSY;
}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index e7425546b4b..427d1c20417 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -125,45 +125,6 @@ static void ide_disk_init_mult_count(ide_drive_t *drive)
}
/**
- * drive_is_flashcard - check for compact flash
- * @drive: drive to check
- *
- * CompactFlash cards and their brethern pretend to be removable
- * hard disks, except:
- * (1) they never have a slave unit, and
- * (2) they don't have doorlock mechanisms.
- * This test catches them, and is invoked elsewhere when setting
- * appropriate config bits.
- *
- * FIXME: This treatment is probably applicable for *all* PCMCIA (PC CARD)
- * devices, so in linux 2.3.x we should change this to just treat all
- * PCMCIA drives this way, and get rid of the model-name tests below
- * (too big of an interface change for 2.4.x).
- * At that time, we might also consider parameterizing the timeouts and
- * retries, since these are MUCH faster than mechanical drives. -M.Lord
- */
-
-static inline int drive_is_flashcard (ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
-
- if (drive->removable) {
- if (id->config == 0x848a) return 1; /* CompactFlash */
- if (!strncmp(id->model, "KODAK ATA_FLASH", 15) /* Kodak */
- || !strncmp(id->model, "Hitachi CV", 10) /* Hitachi */
- || !strncmp(id->model, "SunDisk SDCFB", 13) /* old SanDisk */
- || !strncmp(id->model, "SanDisk SDCFB", 13) /* SanDisk */
- || !strncmp(id->model, "HAGIWARA HPC", 12) /* Hagiwara */
- || !strncmp(id->model, "LEXAR ATA_FLASH", 15) /* Lexar */
- || !strncmp(id->model, "ATA_FLASH", 9)) /* Simple Tech */
- {
- return 1; /* yes, it is a flash memory card */
- }
- }
- return 0; /* no, it is not a flash memory card */
-}
-
-/**
* do_identify - identify a drive
* @drive: drive to identify
* @cmd: command used
@@ -278,13 +239,17 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
/*
* Not an ATAPI device: looks like a "regular" hard disk
*/
- if (id->config & (1<<7))
+
+ /*
+ * 0x848a = CompactFlash device
+ * These are *not* removable in Linux definition of the term
+ */
+
+ if ((id->config != 0x848a) && (id->config & (1<<7)))
drive->removable = 1;
- if (drive_is_flashcard(drive))
- drive->is_flash = 1;
drive->media = ide_disk;
- printk("%s DISK drive\n", (drive->is_flash) ? "CFA" : "ATA" );
+ printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" );
QUIRK_LIST(drive);
return;
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index afeb02bbb72..b2cc43702f6 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -242,7 +242,6 @@ static void init_hwif_data(ide_hwif_t *hwif, unsigned int index)
drive->name[2] = 'a' + (index * MAX_DRIVES) + unit;
drive->max_failures = IDE_DEFAULT_MAX_FAILURES;
drive->using_dma = 0;
- drive->is_flash = 0;
drive->vdma = 0;
INIT_LIST_HEAD(&drive->list);
init_completion(&drive->gendev_rel_comp);
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index a21b1e11eef..c743e68c33a 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -262,6 +262,21 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
else
pci_set_drvdata(dev, (void *) aec6xxx_34_base);
+ /* These are necessary to get AEC6280 Macintosh cards to work */
+ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
+ (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
+ u8 reg49h = 0, reg4ah = 0;
+ /* Clear reset and test bits. */
+ pci_read_config_byte(dev, 0x49, &reg49h);
+ pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
+ /* Enable chip interrupt output. */
+ pci_read_config_byte(dev, 0x4a, &reg4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
+ /* Enable burst mode. */
+ pci_read_config_byte(dev, 0x4a, &reg4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
+ }
+
return dev->irq;
}
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 7b589d948bf..940bdd4c578 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1288,6 +1288,10 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
goto init_hpt37X_done;
}
}
+ if (!pci_get_drvdata(dev)) {
+ printk("No Clock Stabilization!!!\n");
+ return;
+ }
pll_recal:
if (adjust & 1)
pll -= (adjust >> 1);
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 108fda83fea..38f41b377ff 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -733,7 +733,7 @@ static void __devinit it8212_disable_raid(struct pci_dev *dev)
pci_write_config_dword(dev,0x4C, 0x02040204);
pci_write_config_byte(dev, 0x42, 0x36);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
}
static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const char *name)
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index fe06ebb0e5b..acd63173199 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -420,9 +420,6 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
},{ /* 3 */
.name = "PDC20271",
@@ -447,9 +444,6 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
},{ /* 6 */
.name = "PDC20277",
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index ad9d95817f9..6f8f8645b02 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -786,9 +786,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 16,
},{ /* 1 */
@@ -799,9 +796,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
.flags = IDEPCI_FLAG_FORCE_PDC,
@@ -813,9 +807,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
},{ /* 3 */
@@ -826,9 +817,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
.flags = IDEPCI_FLAG_FORCE_PDC,
@@ -840,9 +828,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
}
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index b3e77df63ce..e9b83e1a302 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -135,6 +135,7 @@ static u8 piix_ratemask (ide_drive_t *drive)
case PCI_DEVICE_ID_INTEL_ICH6_19:
case PCI_DEVICE_ID_INTEL_ICH7_21:
case PCI_DEVICE_ID_INTEL_ESB2_18:
+ case PCI_DEVICE_ID_INTEL_ICH8_6:
mode = 3;
break;
/* UDMA 66 capable */
@@ -449,6 +450,7 @@ static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char
case PCI_DEVICE_ID_INTEL_ICH6_19:
case PCI_DEVICE_ID_INTEL_ICH7_21:
case PCI_DEVICE_ID_INTEL_ESB2_18:
+ case PCI_DEVICE_ID_INTEL_ICH8_6:
{
unsigned int extra = 0;
pci_read_config_dword(dev, 0x54, &extra);
@@ -575,6 +577,7 @@ static ide_pci_device_t piix_pci_info[] __devinitdata = {
/* 21 */ DECLARE_PIIX_DEV("ICH7"),
/* 22 */ DECLARE_PIIX_DEV("ICH4"),
/* 23 */ DECLARE_PIIX_DEV("ESB2"),
+ /* 24 */ DECLARE_PIIX_DEV("ICH8M"),
};
/**
@@ -651,6 +654,7 @@ static struct pci_device_id piix_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21},
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22},
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 23},
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 24},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 4ee597d0879..2b286e86516 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2003 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
@@ -510,7 +510,7 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
drive->name);
goto use_pio_instead;
} else {
- u32 xcount, bcount =
+ u32 bcount =
0x10000 - (cur_addr & 0xffff);
if (bcount > cur_len)
@@ -525,8 +525,7 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
*table = 0x0;
table++;
- xcount = bcount & 0xffff;
- *table = cpu_to_be32(xcount);
+ *table = cpu_to_be32(bcount);
table++;
cur_addr += bcount;
@@ -680,7 +679,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
return -EIO;
/* Create /proc/ide entries */
- create_proc_ide_interfaces();
+ create_proc_ide_interfaces();
return 0;
}