aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/touchscreen')
-rw-r--r--drivers/input/touchscreen/Kconfig58
-rw-r--r--drivers/input/touchscreen/Makefile3
-rw-r--r--drivers/input/touchscreen/ad7877.c844
-rw-r--r--drivers/input/touchscreen/ad7879.c782
-rw-r--r--drivers/input/touchscreen/mainstone-wm97xx.c3
-rw-r--r--drivers/input/touchscreen/ucb1400_ts.c5
-rw-r--r--drivers/input/touchscreen/wm97xx-core.c13
-rw-r--r--drivers/input/touchscreen/zylonite-wm97xx.c240
8 files changed, 1942 insertions, 6 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index bb6486a8c07..b01fd61dadc 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -29,6 +29,51 @@ config TOUCHSCREEN_ADS7846
To compile this driver as a module, choose M here: the
module will be called ads7846.
+config TOUCHSCREEN_AD7877
+ tristate "AD7877 based touchscreens"
+ depends on SPI_MASTER
+ help
+ Say Y here if you have a touchscreen interface using the
+ AD7877 controller, and your board-specific initialization
+ code includes that in its table of SPI devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7877.
+
+config TOUCHSCREEN_AD7879_I2C
+ tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
+ depends on I2C
+ select TOUCHSCREEN_AD7879
+ help
+ Say Y here if you have a touchscreen interface using the
+ AD7879-1 controller, and your board-specific initialization
+ code includes that in its table of I2C devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7879.
+
+config TOUCHSCREEN_AD7879_SPI
+ tristate "AD7879 based touchscreens: AD7879 SPI Interface"
+ depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
+ select TOUCHSCREEN_AD7879
+ help
+ Say Y here if you have a touchscreen interface using the
+ AD7879 controller, and your board-specific initialization
+ code includes that in its table of SPI devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7879.
+
+config TOUCHSCREEN_AD7879
+ tristate
+ default n
+
config TOUCHSCREEN_BITSY
tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
depends on SA1100_BITSY
@@ -308,6 +353,19 @@ config TOUCHSCREEN_WM97XX_MAINSTONE
To compile this driver as a module, choose M here: the
module will be called mainstone-wm97xx.
+config TOUCHSCREEN_WM97XX_ZYLONITE
+ tristate "Zylonite accelerated touch"
+ depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
+ select TOUCHSCREEN_WM9713
+ help
+ Say Y here for support for streaming mode with the touchscreen
+ on Zylonite systems.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zylonite-wm97xx.
+
config TOUCHSCREEN_USB_COMPOSITE
tristate "USB Touchscreen Driver"
depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index d3375aff46f..6700f7b9d16 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -6,6 +6,8 @@
wm97xx-ts-y := wm97xx-core.o
+obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o
obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
@@ -34,3 +36,4 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o
wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o
wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
new file mode 100644
index 00000000000..e4728a28f49
--- /dev/null
+++ b/drivers/input/touchscreen/ad7877.c
@@ -0,0 +1,844 @@
+/*
+ * Copyright (C) 2006-2008 Michael Hennerich, Analog Devices Inc.
+ *
+ * Description: AD7877 based touchscreen, sensor (ADCs), DAC and GPIO driver
+ * Based on: ads7846.c
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * History:
+ * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
+ *
+ * Using code from:
+ * - corgi_ts.c
+ * Copyright (C) 2004-2005 Richard Purdie
+ * - omap_ts.[hc], ads7846.h, ts_osk.c
+ * Copyright (C) 2002 MontaVista Software
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2005 Dirk Behme
+ */
+
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ad7877.h>
+#include <asm/irq.h>
+
+#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50)
+
+#define MAX_SPI_FREQ_HZ 20000000
+#define MAX_12BIT ((1<<12)-1)
+
+#define AD7877_REG_ZEROS 0
+#define AD7877_REG_CTRL1 1
+#define AD7877_REG_CTRL2 2
+#define AD7877_REG_ALERT 3
+#define AD7877_REG_AUX1HIGH 4
+#define AD7877_REG_AUX1LOW 5
+#define AD7877_REG_BAT1HIGH 6
+#define AD7877_REG_BAT1LOW 7
+#define AD7877_REG_BAT2HIGH 8
+#define AD7877_REG_BAT2LOW 9
+#define AD7877_REG_TEMP1HIGH 10
+#define AD7877_REG_TEMP1LOW 11
+#define AD7877_REG_SEQ0 12
+#define AD7877_REG_SEQ1 13
+#define AD7877_REG_DAC 14
+#define AD7877_REG_NONE1 15
+#define AD7877_REG_EXTWRITE 15
+#define AD7877_REG_XPLUS 16
+#define AD7877_REG_YPLUS 17
+#define AD7877_REG_Z2 18
+#define AD7877_REG_aux1 19
+#define AD7877_REG_aux2 20
+#define AD7877_REG_aux3 21
+#define AD7877_REG_bat1 22
+#define AD7877_REG_bat2 23
+#define AD7877_REG_temp1 24
+#define AD7877_REG_temp2 25
+#define AD7877_REG_Z1 26
+#define AD7877_REG_GPIOCTRL1 27
+#define AD7877_REG_GPIOCTRL2 28
+#define AD7877_REG_GPIODATA 29
+#define AD7877_REG_NONE2 30
+#define AD7877_REG_NONE3 31
+
+#define AD7877_SEQ_YPLUS_BIT (1<<11)
+#define AD7877_SEQ_XPLUS_BIT (1<<10)
+#define AD7877_SEQ_Z2_BIT (1<<9)
+#define AD7877_SEQ_AUX1_BIT (1<<8)
+#define AD7877_SEQ_AUX2_BIT (1<<7)
+#define AD7877_SEQ_AUX3_BIT (1<<6)
+#define AD7877_SEQ_BAT1_BIT (1<<5)
+#define AD7877_SEQ_BAT2_BIT (1<<4)
+#define AD7877_SEQ_TEMP1_BIT (1<<3)
+#define AD7877_SEQ_TEMP2_BIT (1<<2)
+#define AD7877_SEQ_Z1_BIT (1<<1)
+
+enum {
+ AD7877_SEQ_YPOS = 0,
+ AD7877_SEQ_XPOS = 1,
+ AD7877_SEQ_Z2 = 2,
+ AD7877_SEQ_AUX1 = 3,
+ AD7877_SEQ_AUX2 = 4,
+ AD7877_SEQ_AUX3 = 5,
+ AD7877_SEQ_BAT1 = 6,
+ AD7877_SEQ_BAT2 = 7,
+ AD7877_SEQ_TEMP1 = 8,
+ AD7877_SEQ_TEMP2 = 9,
+ AD7877_SEQ_Z1 = 10,
+ AD7877_NR_SENSE = 11,
+};
+
+/* DAC Register Default RANGE 0 to Vcc, Volatge Mode, DAC On */
+#define AD7877_DAC_CONF 0x1
+
+/* If gpio3 is set AUX3/GPIO3 acts as GPIO Output */
+#define AD7877_EXTW_GPIO_3_CONF 0x1C4
+#define AD7877_EXTW_GPIO_DATA 0x200
+
+/* Control REG 2 */
+#define AD7877_TMR(x) ((x & 0x3) << 0)
+#define AD7877_REF(x) ((x & 0x1) << 2)
+#define AD7877_POL(x) ((x & 0x1) << 3)
+#define AD7877_FCD(x) ((x & 0x3) << 4)
+#define AD7877_PM(x) ((x & 0x3) << 6)
+#define AD7877_ACQ(x) ((x & 0x3) << 8)
+#define AD7877_AVG(x) ((x & 0x3) << 10)
+
+/* Control REG 1 */
+#define AD7877_SER (1 << 11) /* non-differential */
+#define AD7877_DFR (0 << 11) /* differential */
+
+#define AD7877_MODE_NOC (0) /* Do not convert */
+#define AD7877_MODE_SCC (1) /* Single channel conversion */
+#define AD7877_MODE_SEQ0 (2) /* Sequence 0 in Slave Mode */
+#define AD7877_MODE_SEQ1 (3) /* Sequence 1 in Master Mode */
+
+#define AD7877_CHANADD(x) ((x&0xF)<<7)
+#define AD7877_READADD(x) ((x)<<2)
+#define AD7877_WRITEADD(x) ((x)<<12)
+
+#define AD7877_READ_CHAN(x) (AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_SER | \
+ AD7877_MODE_SCC | AD7877_CHANADD(AD7877_REG_ ## x) | \
+ AD7877_READADD(AD7877_REG_ ## x))
+
+#define AD7877_MM_SEQUENCE (AD7877_SEQ_YPLUS_BIT | AD7877_SEQ_XPLUS_BIT | \
+ AD7877_SEQ_Z2_BIT | AD7877_SEQ_Z1_BIT)
+
+/*
+ * Non-touchscreen sensors only use single-ended conversions.
+ */
+
+struct ser_req {
+ u16 reset;
+ u16 ref_on;
+ u16 command;
+ u16 sample;
+ struct spi_message msg;
+ struct spi_transfer xfer[6];
+};
+
+struct ad7877 {
+ struct input_dev *input;
+ char phys[32];
+
+ struct spi_device *spi;
+ u16 model;
+ u16 vref_delay_usecs;
+ u16 x_plate_ohms;
+ u16 pressure_max;
+
+ u16 cmd_crtl1;
+ u16 cmd_crtl2;
+ u16 cmd_dummy;
+ u16 dac;
+
+ u8 stopacq_polarity;
+ u8 first_conversion_delay;
+ u8 acquisition_time;
+ u8 averaging;
+ u8 pen_down_acc_interval;
+
+ u16 conversion_data[AD7877_NR_SENSE];
+
+ struct spi_transfer xfer[AD7877_NR_SENSE + 2];
+ struct spi_message msg;
+
+ struct mutex mutex;
+ unsigned disabled:1; /* P: mutex */
+ unsigned gpio3:1; /* P: mutex */
+ unsigned gpio4:1; /* P: mutex */
+
+ spinlock_t lock;
+ struct timer_list timer; /* P: lock */
+ unsigned pending:1; /* P: lock */
+};
+
+static int gpio3;
+module_param(gpio3, int, 0);
+MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3");
+
+/*
+ * ad7877_read/write are only used for initial setup and for sysfs controls.
+ * The main traffic is done using spi_async() in the interrupt handler.
+ */
+
+static int ad7877_read(struct spi_device *spi, u16 reg)
+{
+ struct ser_req *req;
+ int status, ret;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ req->command = (u16) (AD7877_WRITEADD(AD7877_REG_CTRL1) |
+ AD7877_READADD(reg));
+ req->xfer[0].tx_buf = &req->command;
+ req->xfer[0].len = 2;
+
+ req->xfer[1].rx_buf = &req->sample;
+ req->xfer[1].len = 2;
+
+ spi_message_add_tail(&req->xfer[0], &req->msg);
+ spi_message_add_tail(&req->xfer[1], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+ ret = status ? : req->sample;
+
+ kfree(req);
+
+ return ret;
+}
+
+static int ad7877_write(struct spi_device *spi, u16 reg, u16 val)
+{
+ struct ser_req *req;
+ int status;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ req->command = (u16) (AD7877_WRITEADD(reg) | (val & MAX_12BIT));
+ req->xfer[0].tx_buf = &req->command;
+ req->xfer[0].len = 2;
+
+ spi_message_add_tail(&req->xfer[0], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+
+ kfree(req);
+
+ return status;
+}
+
+static int ad7877_read_adc(struct spi_device *spi, unsigned command)
+{
+ struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+ struct ser_req *req;
+ int status;
+ int sample;
+ int i;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ /* activate reference, so it has time to settle; */
+ req->ref_on = AD7877_WRITEADD(AD7877_REG_CTRL2) |
+ AD7877_POL(ts->stopacq_polarity) |
+ AD7877_AVG(0) | AD7877_PM(2) | AD7877_TMR(0) |
+ AD7877_ACQ(ts->acquisition_time) | AD7877_FCD(0);
+
+ req->reset = AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_MODE_NOC;
+
+ req->command = (u16) command;
+
+ req->xfer[0].tx_buf = &req->reset;
+ req->xfer[0].len = 2;
+
+ req->xfer[1].tx_buf = &req->ref_on;
+ req->xfer[1].len = 2;
+ req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+
+ req->xfer[2].tx_buf = &req->command;
+ req->xfer[2].len = 2;
+ req->xfer[2].delay_usecs = ts->vref_delay_usecs;
+
+ req->xfer[3].rx_buf = &req->sample;
+ req->xfer[3].len = 2;
+
+ req->xfer[4].tx_buf = &ts->cmd_crtl2; /*REF OFF*/
+ req->xfer[4].len = 2;
+
+ req->xfer[5].tx_buf = &ts->cmd_crtl1; /*DEFAULT*/
+ req->xfer[5].len = 2;
+
+ /* group all the transfers together, so we can't interfere with
+ * reading touchscreen state; disable penirq while sampling
+ */
+ for (i = 0; i < 6; i++)
+ spi_message_add_tail(&req->xfer[i], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+ sample = req->sample;
+
+ kfree(req);
+
+ return status ? : sample;
+}
+
+static void ad7877_rx(struct ad7877 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+ unsigned Rt;
+ u16 x, y, z1, z2;
+
+ x = ts->conversion_data[AD7877_SEQ_XPOS] & MAX_12BIT;
+ y = ts->conversion_data[AD7877_SEQ_YPOS] & MAX_12BIT;
+ z1 = ts->conversion_data[AD7877_SEQ_Z1] & MAX_12BIT;
+ z2 = ts->conversion_data[AD7877_SEQ_Z2] & MAX_12BIT;
+
+ /*
+ * The samples processed here are already preprocessed by the AD7877.
+ * The preprocessing function consists of an averaging filter.
+ * The combination of 'first conversion delay' and averaging provides a robust solution,
+ * discarding the spurious noise in the signal and keeping only the data of interest.
+ * The size of the averaging filter is programmable. (dev.platform_data, see linux/spi/ad7877.h)
+ * Other user-programmable conversion controls include variable acquisition time,
+ * and first conversion delay. Up to 16 averages can be taken per conversion.
+ */
+
+ if (likely(x && z1)) {
+ /* compute touch pressure resistance using equation #1 */
+ Rt = (z2 - z1) * x * ts->x_plate_ohms;
+ Rt /= z1;
+ Rt = (Rt + 2047) >> 12;
+
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ input_report_abs(input_dev, ABS_PRESSURE, Rt);
+ input_sync(input_dev);
+ }
+}
+
+static inline void ad7877_ts_event_release(struct ad7877 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+ input_sync(input_dev);
+}
+
+static void ad7877_timer(unsigned long handle)
+{
+ struct ad7877 *ts = (void *)handle;
+
+ ad7877_ts_event_release(ts);
+}
+
+static irqreturn_t ad7877_irq(int irq, void *handle)
+{
+ struct ad7877 *ts = handle;
+ unsigned long flags;
+ int status;
+
+ /*
+ * The repeated conversion sequencer controlled by TMR kicked off
+ * too fast. We ignore the last and process the sample sequence
+ * currently in the queue. It can't be older than 9.4ms, and we
+ * need to avoid that ts->msg doesn't get issued twice while in work.
+ */
+
+ spin_lock_irqsave(&ts->lock, flags);
+ if (!ts->pending) {
+ ts->pending = 1;
+
+ status = spi_async(ts->spi, &ts->msg);
+ if (status)
+ dev_err(&ts->spi->dev, "spi_sync --> %d\n", status);
+ }
+ spin_unlock_irqrestore(&ts->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void ad7877_callback(void *_ts)
+{
+ struct ad7877 *ts = _ts;
+
+ spin_lock_irq(&ts->lock);
+
+ ad7877_rx(ts);
+ ts->pending = 0;
+ mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
+
+ spin_unlock_irq(&ts->lock);
+}
+
+static void ad7877_disable(struct ad7877 *ts)
+{
+ mutex_lock(&ts->mutex);
+
+ if (!ts->disabled) {
+ ts->disabled = 1;
+ disable_irq(ts->spi->irq);
+
+ /* Wait for spi_async callback */
+ while (ts->pending)
+ msleep(1);
+
+ if (del_timer_sync(&ts->timer))
+ ad7877_ts_event_release(ts);
+ }
+
+ /* we know the chip's in lowpower mode since we always
+ * leave it that way after every request
+ */
+
+ mutex_unlock(&ts->mutex);
+}
+
+static void ad7877_enable(struct ad7877 *ts)
+{
+ mutex_lock(&ts->mutex);
+
+ if (ts->disabled) {
+ ts->disabled = 0;
+ enable_irq(ts->spi->irq);
+ }
+
+ mutex_unlock(&ts->mutex);
+}
+
+#define SHOW(name) static ssize_t \
+name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct ad7877 *ts = dev_get_drvdata(dev); \
+ ssize_t v = ad7877_read_adc(ts->spi, \
+ AD7877_READ_CHAN(name)); \
+ if (v < 0) \
+ return v; \
+ return sprintf(buf, "%u\n", (unsigned) v); \
+} \
+static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
+
+SHOW(aux1)
+SHOW(aux2)
+SHOW(aux3)
+SHOW(bat1)
+SHOW(bat2)
+SHOW(temp1)
+SHOW(temp2)
+
+static ssize_t ad7877_disable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ad7877_disable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ if (val)
+ ad7877_disable(ts);
+ else
+ ad7877_enable(ts);
+
+ return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ad7877_disable_show, ad7877_disable_store);
+
+static ssize_t ad7877_dac_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->dac);
+}
+
+static ssize_t ad7877_dac_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&ts->mutex);
+ ts->dac = val & 0xFF;
+ ad7877_write(ts->spi, AD7877_REG_DAC, (ts->dac << 4) | AD7877_DAC_CONF);
+ mutex_unlock(&ts->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(dac, 0664, ad7877_dac_show, ad7877_dac_store);
+
+static ssize_t ad7877_gpio3_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->gpio3);
+}
+
+static ssize_t ad7877_gpio3_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&ts->mutex);
+ ts->gpio3 = !!val;
+ ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA |
+ (ts->gpio4 << 4) | (ts->gpio3 << 5));
+ mutex_unlock(&ts->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store);
+
+static ssize_t ad7877_gpio4_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->gpio4);
+}
+
+static ssize_t ad7877_gpio4_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&ts->mutex);
+ ts->gpio4 = !!val;
+ ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA |
+ (ts->gpio4 << 4) | (ts->gpio3 << 5));
+ mutex_unlock(&ts->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(gpio4, 0664, ad7877_gpio4_show, ad7877_gpio4_store);
+
+static struct attribute *ad7877_attributes[] = {
+ &dev_attr_temp1.attr,
+ &dev_attr_temp2.attr,
+ &dev_attr_aux1.attr,
+ &dev_attr_aux2.attr,
+ &dev_attr_bat1.attr,
+ &dev_attr_bat2.attr,
+ &dev_attr_disable.attr,
+ &dev_attr_dac.attr,
+ &dev_attr_gpio4.attr,
+ NULL
+};
+
+static const struct attribute_group ad7877_attr_group = {
+ .attrs = ad7877_attributes,
+};
+
+static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts)
+{
+ struct spi_message *m;
+ int i;
+
+ ts->cmd_crtl2 = AD7877_WRITEADD(AD7877_REG_CTRL2) |
+ AD7877_POL(ts->stopacq_polarity) |
+ AD7877_AVG(ts->averaging) | AD7877_PM(1) |
+ AD7877_TMR(ts->pen_down_acc_interval) |
+ AD7877_ACQ(ts->acquisition_time) |
+ AD7877_FCD(ts->first_conversion_delay);
+
+ ad7877_write(spi, AD7877_REG_CTRL2, ts->cmd_crtl2);
+
+ ts->cmd_crtl1 = AD7877_WRITEADD(AD7877_REG_CTRL1) |
+ AD7877_READADD(AD7877_REG_XPLUS-1) |
+ AD7877_MODE_SEQ1 | AD7877_DFR;
+
+ ad7877_write(spi, AD7877_REG_CTRL1, ts->cmd_crtl1);
+
+ ts->cmd_dummy = 0;
+
+ m = &ts->msg;
+
+ spi_message_init(m);
+
+ m->complete = ad7877_callback;
+ m->context = ts;
+
+ ts->xfer[0].tx_buf = &ts->cmd_crtl1;
+ ts->xfer[0].len = 2;
+
+ spi_message_add_tail(&ts->xfer[0], m);
+
+ ts->xfer[1].tx_buf = &ts->cmd_dummy; /* Send ZERO */
+ ts->xfer[1].len = 2;
+
+ spi_message_add_tail(&ts->xfer[1], m);
+
+ for (i = 0; i < 11; i++) {
+ ts->xfer[i + 2].rx_buf = &ts->conversion_data[AD7877_SEQ_YPOS + i];
+ ts->xfer[i + 2].len = 2;
+ spi_message_add_tail(&ts->xfer[i + 2], m);
+ }
+}
+
+static int __devinit ad7877_probe(struct spi_device *spi)
+{
+ struct ad7877 *ts;
+ struct input_dev *input_dev;
+ struct ad7877_platform_data *pdata = spi->dev.platform_data;
+ int err;
+ u16 verify;
+
+ if (!spi->irq) {
+ dev_dbg(&spi->dev, "no IRQ?\n");
+ return -ENODEV;
+ }
+
+ if (!pdata) {
+ dev_dbg(&spi->dev, "no platform data?\n");
+ return -ENODEV;
+ }
+
+ /* don't exceed max specified SPI CLK frequency */
+ if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+ dev_dbg(&spi->dev, "SPI CLK %d Hz?\n",spi->max_speed_hz);
+ return -EINVAL;
+ }
+
+ ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ts || !input_dev) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ dev_set_drvdata(&spi->dev, ts);
+ ts->spi = spi;
+ ts->input = input_dev;
+
+ setup_timer(&ts->timer, ad7877_timer, (unsigned long) ts);
+ mutex_init(&ts->mutex);
+ spin_lock_init(&ts->lock);
+
+ ts->model = pdata->model ? : 7877;
+ ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
+ ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+ ts->pressure_max = pdata->pressure_max ? : ~0;
+
+ ts->stopacq_polarity = pdata->stopacq_polarity;
+ ts->first_conversion_delay = pdata->first_conversion_delay;
+ ts->acquisition_time = pdata->acquisition_time;
+ ts->averaging = pdata->averaging;
+ ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
+
+ snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
+
+ input_dev->name = "AD7877 Touchscreen";
+ input_dev->phys = ts->phys;
+ input_dev->dev.parent = &spi->dev;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(ABS_X, input_dev->absbit);
+ __set_bit(ABS_Y, input_dev->absbit);
+ __set_bit(ABS_PRESSURE, input_dev->absbit);
+
+ input_set_abs_params(input_dev, ABS_X,
+ pdata->x_min ? : 0,
+ pdata->x_max ? : MAX_12BIT,
+ 0, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ pdata->y_min ? : 0,
+ pdata->y_max ? : MAX_12BIT,
+ 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ pdata->pressure_min, pdata->pressure_max, 0, 0);
+
+ ad7877_write(spi, AD7877_REG_SEQ1, AD7877_MM_SEQUENCE);
+
+ verify = ad7877_read(spi, AD7877_REG_SEQ1);
+
+ if (verify != AD7877_MM_SEQUENCE){
+ dev_err(&spi->dev, "%s: Failed to probe %s\n",
+ dev_name(&spi->dev), input_dev->name);
+ err = -ENODEV;
+ goto err_free_mem;
+ }
+
+ if (gpio3)
+ ad7877_write(spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_3_CONF);
+
+ ad7877_setup_ts_def_msg(spi, ts);
+
+ /* Request AD7877 /DAV GPIO interrupt */
+
+ err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING |
+ IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts);
+ if (err) {
+ dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+ goto err_free_mem;
+ }
+
+ err = sysfs_create_group(&spi->dev.kobj, &ad7877_attr_group);
+ if (err)
+ goto err_free_irq;
+
+ err = device_create_file(&spi->dev,
+ gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
+ if (err)
+ goto err_remove_attr_group;
+
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_remove_attr;
+
+ return 0;
+
+err_remove_attr:
+ device_remove_file(&spi->dev,
+ gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
+err_remove_attr_group:
+ sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group);
+err_free_irq:
+ free_irq(spi->irq, ts);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(ts);
+ dev_set_drvdata(&spi->dev, NULL);
+ return err;
+}
+
+static int __devexit ad7877_remove(struct spi_device *spi)
+{
+ struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+
+ sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group);
+ device_remove_file(&spi->dev,
+ gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
+
+ ad7877_disable(ts);
+ free_irq(ts->spi->irq, ts);
+
+ input_unregister_device(ts->input);
+ kfree(ts);
+
+ dev_dbg(&spi->dev, "unregistered touchscreen\n");
+ dev_set_drvdata(&spi->dev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ad7877_suspend(struct spi_device *spi, pm_message_t message)
+{
+ struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+
+ ad7877_disable(ts);
+
+ return 0;
+}
+
+static int ad7877_resume(struct spi_device *spi)
+{
+ struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+
+ ad7877_enable(ts);
+
+ return 0;
+}
+#else
+#define ad7877_suspend NULL
+#define ad7877_resume NULL
+#endif
+
+static struct spi_driver ad7877_driver = {
+ .driver = {
+ .name = "ad7877",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7877_probe,
+ .remove = __devexit_p(ad7877_remove),
+ .suspend = ad7877_suspend,
+ .resume = ad7877_resume,
+};
+
+static int __init ad7877_init(void)
+{
+ return spi_register_driver(&ad7877_driver);
+}
+module_init(ad7877_init);
+
+static void __exit ad7877_exit(void)
+{
+ spi_unregister_driver(&ad7877_driver);
+}
+module_exit(ad7877_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7877 touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
new file mode 100644
index 00000000000..ea4c61d6868
--- /dev/null
+++ b/drivers/input/touchscreen/ad7879.c
@@ -0,0 +1,782 @@
+/*
+ * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc.
+ *
+ * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface)
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * History:
+ * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
+ *
+ * Using code from:
+ * - corgi_ts.c
+ * Copyright (C) 2004-2005 Richard Purdie
+ * - omap_ts.[hc], ads7846.h, ts_osk.c
+ * Copyright (C) 2002 MontaVista Software
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2005 Dirk Behme
+ * - ad7877.c
+ * Copyright (C) 2006-2008 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+
+#include <linux/spi/ad7879.h>
+
+#define AD7879_REG_ZEROS 0
+#define AD7879_REG_CTRL1 1
+#define AD7879_REG_CTRL2 2
+#define AD7879_REG_CTRL3 3
+#define AD7879_REG_AUX1HIGH 4
+#define AD7879_REG_AUX1LOW 5
+#define AD7879_REG_TEMP1HIGH 6
+#define AD7879_REG_TEMP1LOW 7
+#define AD7879_REG_XPLUS 8
+#define AD7879_REG_YPLUS 9
+#define AD7879_REG_Z1 10
+#define AD7879_REG_Z2 11
+#define AD7879_REG_AUXVBAT 12
+#define AD7879_REG_TEMP 13
+#define AD7879_REG_REVID 14
+
+/* Control REG 1 */
+#define AD7879_TMR(x) ((x & 0xFF) << 0)
+#define AD7879_ACQ(x) ((x & 0x3) << 8)
+#define AD7879_MODE_NOC (0 << 10) /* Do not convert */
+#define AD7879_MODE_SCC (1 << 10) /* Single channel conversion */
+#define AD7879_MODE_SEQ0 (2 << 10) /* Sequence 0 in Slave Mode */
+#define AD7879_MODE_SEQ1 (3 << 10) /* Sequence 1 in Master Mode */
+#define AD7879_MODE_INT (1 << 15) /* PENIRQ disabled INT enabled */
+
+/* Control REG 2 */
+#define AD7879_FCD(x) ((x & 0x3) << 0)
+#define AD7879_RESET (1 << 4)
+#define AD7879_MFS(x) ((x & 0x3) << 5)
+#define AD7879_AVG(x) ((x & 0x3) << 7)
+#define AD7879_SER (1 << 9) /* non-differential */
+#define AD7879_DFR (0 << 9) /* differential */
+#define AD7879_GPIOPOL (1 << 10)
+#define AD7879_GPIODIR (1 << 11)
+#define AD7879_GPIO_DATA (1 << 12)
+#define AD7879_GPIO_EN (1 << 13)
+#define AD7879_PM(x) ((x & 0x3) << 14)
+#define AD7879_PM_SHUTDOWN (0)
+#define AD7879_PM_DYN (1)
+#define AD7879_PM_FULLON (2)
+
+/* Control REG 3 */
+#define AD7879_TEMPMASK_BIT (1<<15)
+#define AD7879_AUXVBATMASK_BIT (1<<14)
+#define AD7879_INTMODE_BIT (1<<13)
+#define AD7879_GPIOALERTMASK_BIT (1<<12)
+#define AD7879_AUXLOW_BIT (1<<11)
+#define AD7879_AUXHIGH_BIT (1<<10)
+#define AD7879_TEMPLOW_BIT (1<<9)
+#define AD7879_TEMPHIGH_BIT (1<<8)
+#define AD7879_YPLUS_BIT (1<<7)
+#define AD7879_XPLUS_BIT (1<<6)
+#define AD7879_Z1_BIT (1<<5)
+#define AD7879_Z2_BIT (1<<4)
+#define AD7879_AUX_BIT (1<<3)
+#define AD7879_VBAT_BIT (1<<2)
+#define AD7879_TEMP_BIT (1<<1)
+
+enum {
+ AD7879_SEQ_XPOS = 0,
+ AD7879_SEQ_YPOS = 1,
+ AD7879_SEQ_Z1 = 2,
+ AD7879_SEQ_Z2 = 3,
+ AD7879_NR_SENSE = 4,
+};
+
+#define MAX_12BIT ((1<<12)-1)
+#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50)
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#define AD7879_DEVID 0x7A
+typedef struct spi_device bus_device;
+#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+#define AD7879_DEVID 0x79
+typedef struct i2c_client bus_device;
+#endif
+
+struct ad7879 {
+ bus_device *bus;
+ struct input_dev *input;
+ struct work_struct work;
+ struct timer_list timer;
+
+ struct mutex mutex;
+ unsigned disabled:1; /* P: mutex */
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+ struct spi_message msg;
+ struct spi_transfer xfer[AD7879_NR_SENSE + 1];
+ u16 cmd;
+#endif
+ u16 conversion_data[AD7879_NR_SENSE];
+ char phys[32];
+ u8 first_conversion_delay;
+ u8 acquisition_time;
+ u8 averaging;
+ u8 pen_down_acc_interval;
+ u8 median;
+ u16 x_plate_ohms;
+ u16 pressure_max;
+ u16 gpio_init;
+ u16 cmd_crtl1;
+ u16 cmd_crtl2;
+ u16 cmd_crtl3;
+ unsigned gpio:1;
+};
+
+static int ad7879_read(bus_device *, u8);
+static int ad7879_write(bus_device *, u8, u16);
+static void ad7879_collect(struct ad7879 *);
+
+static void ad7879_report(struct ad7879 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+ unsigned Rt;
+ u16 x, y, z1, z2;
+
+ x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT;
+ y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT;
+ z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT;
+ z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT;
+
+ /*
+ * The samples processed here are already preprocessed by the AD7879.
+ * The preprocessing function consists of a median and an averaging filter.
+ * The combination of these two techniques provides a robust solution,
+ * discarding the spurious noise in the signal and keeping only the data of interest.
+ * The size of both filters is programmable. (dev.platform_data, see linux/spi/ad7879.h)
+ * Other user-programmable conversion controls include variable acquisition time,
+ * and first conversion delay. Up to 16 averages can be taken per conversion.
+ */
+
+ if (likely(x && z1)) {
+ /* compute touch pressure resistance using equation #1 */
+ Rt = (z2 - z1) * x * ts->x_plate_ohms;
+ Rt /= z1;
+ Rt = (Rt + 2047) >> 12;
+
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ input_report_abs(input_dev, ABS_PRESSURE, Rt);
+ input_sync(input_dev);
+ }
+}
+
+static void ad7879_work(struct work_struct *work)
+{
+ struct ad7879 *ts = container_of(work, struct ad7879, work);
+
+ /* use keventd context to read the result registers */
+ ad7879_collect(ts);
+ ad7879_report(ts);
+ mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
+}
+
+static void ad7879_ts_event_release(struct ad7879 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+ input_sync(input_dev);
+}
+
+static void ad7879_timer(unsigned long handle)
+{
+ struct ad7879 *ts = (void *)handle;
+
+ ad7879_ts_event_release(ts);
+}
+
+static irqreturn_t ad7879_irq(int irq, void *handle)
+{
+ struct ad7879 *ts = handle;
+
+ /* The repeated conversion sequencer controlled by TMR kicked off too fast.
+ * We ignore the last and process the sample sequence currently in the queue.
+ * It can't be older than 9.4ms
+ */
+
+ if (!work_pending(&ts->work))
+ schedule_work(&ts->work);
+
+ return IRQ_HANDLED;
+}
+
+static void ad7879_setup(struct ad7879 *ts)
+{
+ ts->cmd_crtl3 = AD7879_YPLUS_BIT |
+ AD7879_XPLUS_BIT |
+ AD7879_Z2_BIT |
+ AD7879_Z1_BIT |
+ AD7879_TEMPMASK_BIT |
+ AD7879_AUXVBATMASK_BIT |
+ AD7879_GPIOALERTMASK_BIT;
+
+ ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
+ AD7879_AVG(ts->averaging) |
+ AD7879_MFS(ts->median) |
+ AD7879_FCD(ts->first_conversion_delay) |
+ ts->gpio_init;
+
+ ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
+ AD7879_ACQ(ts->acquisition_time) |
+ AD7879_TMR(ts->pen_down_acc_interval);
+
+ ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+ ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3);
+ ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1);
+}
+
+static void ad7879_disable(struct ad7879 *ts)
+{
+ mutex_lock(&ts->mutex);
+
+ if (!ts->disabled) {
+
+ ts->disabled = 1;
+ disable_irq(ts->bus->irq);
+
+ cancel_work_sync(&ts->work);
+
+ if (del_timer_sync(&ts->timer))
+ ad7879_ts_event_release(ts);
+
+ ad7879_write(ts->bus, AD7879_REG_CTRL2,
+ AD7879_PM(AD7879_PM_SHUTDOWN));
+ }
+
+ mutex_unlock(&ts->mutex);
+}
+
+static void ad7879_enable(struct ad7879 *ts)
+{
+ mutex_lock(&ts->mutex);
+
+ if (ts->disabled) {
+ ad7879_setup(ts);
+ ts->disabled = 0;
+ enable_irq(ts->bus->irq);
+ }
+
+ mutex_unlock(&ts->mutex);
+}
+
+static ssize_t ad7879_disable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ad7879_disable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ if (val)
+ ad7879_disable(ts);
+ else
+ ad7879_enable(ts);
+
+ return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store);
+
+static ssize_t ad7879_gpio_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->gpio);
+}
+
+static ssize_t ad7879_gpio_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&ts->mutex);
+ ts->gpio = !!val;
+ error = ad7879_write(ts->bus, AD7879_REG_CTRL2,
+ ts->gpio ?
+ ts->cmd_crtl2 & ~AD7879_GPIO_DATA :
+ ts->cmd_crtl2 | AD7879_GPIO_DATA);
+ mutex_unlock(&ts->mutex);
+
+ return error ? : count;
+}
+
+static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store);
+
+static struct attribute *ad7879_attributes[] = {
+ &dev_attr_disable.attr,
+ &dev_attr_gpio.attr,
+ NULL
+};
+
+static const struct attribute_group ad7879_attr_group = {
+ .attrs = ad7879_attributes,
+};
+
+static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
+{
+ struct input_dev *input_dev;
+ struct ad7879_platform_data *pdata = bus->dev.platform_data;
+ int err;
+ u16 revid;
+
+ if (!bus->irq) {
+ dev_err(&bus->dev, "no IRQ?\n");
+ return -ENODEV;
+ }
+
+ if (!pdata) {
+ dev_err(&bus->dev, "no platform data?\n");
+ return -ENODEV;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ ts->input = input_dev;
+
+ setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts);
+ INIT_WORK(&ts->work, ad7879_work);
+ mutex_init(&ts->mutex);
+
+ ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+ ts->pressure_max = pdata->pressure_max ? : ~0;
+
+ ts->first_conversion_delay = pdata->first_conversion_delay;
+ ts->acquisition_time = pdata->acquisition_time;
+ ts->averaging = pdata->averaging;
+ ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
+ ts->median = pdata->median;
+
+ if (pdata->gpio_output)
+ ts->gpio_init = AD7879_GPIO_EN |
+ (pdata->gpio_default ? 0 : AD7879_GPIO_DATA);
+ else
+ ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR;
+
+ snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev));
+
+ input_dev->name = "AD7879 Touchscreen";
+ input_dev->phys = ts->phys;
+ input_dev->dev.parent = &bus->dev;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(ABS_X, input_dev->absbit);
+ __set_bit(ABS_Y, input_dev->absbit);
+ __set_bit(ABS_PRESSURE, input_dev->absbit);
+
+ input_set_abs_params(input_dev, ABS_X,
+ pdata->x_min ? : 0,
+ pdata->x_max ? : MAX_12BIT,
+ 0, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ pdata->y_min ? : 0,
+ pdata->y_max ? : MAX_12BIT,
+ 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ pdata->pressure_min, pdata->pressure_max, 0, 0);
+
+ err = ad7879_write(bus, AD7879_REG_CTRL2, AD7879_RESET);
+
+ if (err < 0) {
+ dev_err(&bus->dev, "Failed to write %s\n", input_dev->name);
+ goto err_free_mem;
+ }
+
+ revid = ad7879_read(bus, AD7879_REG_REVID);
+
+ if ((revid & 0xFF) != AD7879_DEVID) {
+ dev_err(&bus->dev, "Failed to probe %s\n", input_dev->name);
+ err = -ENODEV;
+ goto err_free_mem;
+ }
+
+ ad7879_setup(ts);
+
+ err = request_irq(bus->irq, ad7879_irq,
+ IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM,
+ bus->dev.driver->name, ts);
+
+ if (err) {
+ dev_err(&bus->dev, "irq %d busy?\n", bus->irq);
+ goto err_free_mem;
+ }
+
+ err = sysfs_create_group(&bus->dev.kobj, &ad7879_attr_group);
+ if (err)
+ goto err_free_irq;
+
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_remove_attr;
+
+ dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n",
+ revid >> 8, bus->irq);
+
+ return 0;
+
+err_remove_attr:
+ sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group);
+err_free_irq:
+ free_irq(bus->irq, ts);
+err_free_mem:
+ input_free_device(input_dev);
+
+ return err;
+}
+
+static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts)
+{
+ ad7879_disable(ts);
+ sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group);
+ free_irq(ts->bus->irq, ts);
+ input_unregister_device(ts->input);
+ dev_dbg(&bus->dev, "unregistered touchscreen\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ad7879_suspend(bus_device *bus, pm_message_t message)
+{
+ struct ad7879 *ts = dev_get_drvdata(&bus->dev);
+
+ ad7879_disable(ts);
+
+ return 0;
+}
+
+static int ad7879_resume(bus_device *bus)
+{
+ struct ad7879 *ts = dev_get_drvdata(&bus->dev);
+
+ ad7879_enable(ts);
+
+ return 0;
+}
+#else
+#define ad7879_suspend NULL
+#define ad7879_resume NULL
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#define MAX_SPI_FREQ_HZ 5000000
+#define AD7879_CMD_MAGIC 0xE000
+#define AD7879_CMD_READ (1 << 10)
+#define AD7879_WRITECMD(reg) (AD7879_CMD_MAGIC | (reg & 0xF))
+#define AD7879_READCMD(reg) (AD7879_CMD_MAGIC | AD7879_CMD_READ | (reg & 0xF))
+
+struct ser_req {
+ u16 command;
+ u16 data;
+ struct spi_message msg;
+ struct spi_transfer xfer[2];
+};
+
+/*
+ * ad7879_read/write are only used for initial setup and for sysfs controls.
+ * The main traffic is done in ad7879_collect().
+ */
+
+static int ad7879_read(struct spi_device *spi, u8 reg)
+{
+ struct ser_req *req;
+ int status, ret;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ req->command = (u16) AD7879_READCMD(reg);
+ req->xfer[0].tx_buf = &req->command;
+ req->xfer[0].len = 2;
+
+ req->xfer[1].rx_buf = &req->data;
+ req->xfer[1].len = 2;
+
+ spi_message_add_tail(&req->xfer[0], &req->msg);
+ spi_message_add_tail(&req->xfer[1], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+ ret = status ? : req->data;
+
+ kfree(req);
+
+ return ret;
+}
+
+static int ad7879_write(struct spi_device *spi, u8 reg, u16 val)
+{
+ struct ser_req *req;
+ int status;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ req->command = (u16) AD7879_WRITECMD(reg);
+ req->xfer[0].tx_buf = &req->command;
+ req->xfer[0].len = 2;
+
+ req->data = val;
+ req->xfer[1].tx_buf = &req->data;
+ req->xfer[1].len = 2;
+
+ spi_message_add_tail(&req->xfer[0], &req->msg);
+ spi_message_add_tail(&req->xfer[1], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+
+ kfree(req);
+
+ return status;
+}
+
+static void ad7879_collect(struct ad7879 *ts)
+{
+ int status = spi_sync(ts->bus, &ts->msg);
+
+ if (status)
+ dev_err(&ts->bus->dev, "spi_sync --> %d\n", status);
+}
+
+static void ad7879_setup_ts_def_msg(struct ad7879 *ts)
+{
+ struct spi_message *m;
+ int i;
+
+ ts->cmd = (u16) AD7879_READCMD(AD7879_REG_XPLUS);
+
+ m = &ts->msg;
+ spi_message_init(m);
+ ts->xfer[0].tx_buf = &ts->cmd;
+ ts->xfer[0].len = 2;
+
+ spi_message_add_tail(&ts->xfer[0], m);
+
+ for (i = 0; i < AD7879_NR_SENSE; i++) {
+ ts->xfer[i + 1].rx_buf = &ts->conversion_data[i];
+ ts->xfer[i + 1].len = 2;
+ spi_message_add_tail(&ts->xfer[i + 1], m);
+ }
+}
+
+static int __devinit ad7879_probe(struct spi_device *spi)
+{
+ struct ad7879 *ts;
+ int error;
+
+ /* don't exceed max specified SPI CLK frequency */
+ if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+ dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz);
+ return -EINVAL;
+ }
+
+ ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, ts);
+ ts->bus = spi;
+
+ ad7879_setup_ts_def_msg(ts);
+
+ error = ad7879_construct(spi, ts);
+ if (error) {
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(ts);
+ }
+
+ return 0;
+}
+
+static int __devexit ad7879_remove(struct spi_device *spi)
+{
+ struct ad7879 *ts = dev_get_drvdata(&spi->dev);
+
+ ad7879_destroy(spi, ts);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(ts);
+
+ return 0;
+}
+
+static struct spi_driver ad7879_driver = {
+ .driver = {
+ .name = "ad7879",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7879_probe,
+ .remove = __devexit_p(ad7879_remove),
+ .suspend = ad7879_suspend,
+ .resume = ad7879_resume,
+};
+
+static int __init ad7879_init(void)
+{
+ return spi_register_driver(&ad7879_driver);
+}
+module_init(ad7879_init);
+
+static void __exit ad7879_exit(void)
+{
+ spi_unregister_driver(&ad7879_driver);
+}
+module_exit(ad7879_exit);
+
+#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+
+/* All registers are word-sized.
+ * AD7879 uses a high-byte first convention.
+ */
+static int ad7879_read(struct i2c_client *client, u8 reg)
+{
+ return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+static int ad7879_write(struct i2c_client *client, u8 reg, u16 val)
+{
+ return i2c_smbus_write_word_data(client, reg, swab16(val));
+}
+
+static void ad7879_collect(struct ad7879 *ts)
+{
+ int i;
+
+ for (i = 0; i < AD7879_NR_SENSE; i++)
+ ts->conversion_data[i] = ad7879_read(ts->bus,
+ AD7879_REG_XPLUS + i);
+}
+
+static int __devinit ad7879_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ad7879 *ts;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_err(&client->dev, "SMBUS Word Data not Supported\n");
+ return -EIO;
+ }
+
+ ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, ts);
+ ts->bus = client;
+
+ error = ad7879_construct(client, ts);
+ if (error) {
+ i2c_set_clientdata(client, NULL);
+ kfree(ts);
+ }
+
+ return 0;
+}
+
+static int __devexit ad7879_remove(struct i2c_client *client)
+{
+ struct ad7879 *ts = dev_get_drvdata(&client->dev);
+
+ ad7879_destroy(client, ts);
+ i2c_set_clientdata(client, NULL);
+ kfree(ts);
+
+ return 0;
+}
+
+static const struct i2c_device_id ad7879_id[] = {
+ { "ad7879", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ad7879_id);
+
+static struct i2c_driver ad7879_driver = {
+ .driver = {
+ .name = "ad7879",
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7879_probe,
+ .remove = __devexit_p(ad7879_remove),
+ .suspend = ad7879_suspend,
+ .resume = ad7879_resume,
+ .id_table = ad7879_id,
+};
+
+static int __init ad7879_init(void)
+{
+ return i2c_add_driver(&ad7879_driver);
+}
+module_init(ad7879_init);
+
+static void __exit ad7879_exit(void)
+{
+ i2c_del_driver(&ad7879_driver);
+}
+module_exit(ad7879_exit);
+#endif
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 1d11e2be9ef..dfa6a84ab50 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -162,6 +162,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+ input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
input_sync(wm->input_dev);
reads++;
} while (reads < cinfo[sp_idx].reads);
@@ -245,7 +246,7 @@ static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
if (enable)
enable_irq(wm->pen_irq);
else
- disable_irq(wm->pen_irq);
+ disable_irq_nosync(wm->pen_irq);
}
static struct wm97xx_mach_ops mainstone_mach_ops = {
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 54986627def..e868264fe79 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -151,12 +151,14 @@ static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16
input_report_abs(idev, ABS_X, x);
input_report_abs(idev, ABS_Y, y);
input_report_abs(idev, ABS_PRESSURE, pressure);
+ input_report_key(idev, BTN_TOUCH, 1);
input_sync(idev);
}
static void ucb1400_ts_event_release(struct input_dev *idev)
{
input_report_abs(idev, ABS_PRESSURE, 0);
+ input_report_key(idev, BTN_TOUCH, 0);
input_sync(idev);
}
@@ -377,7 +379,8 @@ static int ucb1400_ts_probe(struct platform_device *dev)
ucb->ts_idev->id.product = ucb->id;
ucb->ts_idev->open = ucb1400_ts_open;
ucb->ts_idev->close = ucb1400_ts_close;
- ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS);
+ ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+ ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
ucb1400_adc_enable(ucb->ac97);
x_res = ucb1400_ts_read_xres(ucb);
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index d15aa11d705..cec480bffe3 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -409,6 +409,7 @@ static int wm97xx_read_samples(struct wm97xx *wm)
wm->pen_is_down = 0;
dev_dbg(wm->dev, "pen up\n");
input_report_abs(wm->input_dev, ABS_PRESSURE, 0);
+ input_report_key(wm->input_dev, BTN_TOUCH, 0);
input_sync(wm->input_dev);
} else if (!(rc & RC_AGAIN)) {
/* We need high frequency updates only while
@@ -433,6 +434,7 @@ static int wm97xx_read_samples(struct wm97xx *wm)
input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff);
input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff);
input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff);
+ input_report_key(wm->input_dev, BTN_TOUCH, 1);
input_sync(wm->input_dev);
wm->pen_is_down = 1;
wm->ts_reader_interval = wm->ts_reader_min_interval;
@@ -628,18 +630,21 @@ static int wm97xx_probe(struct device *dev)
wm->input_dev->phys = "wm97xx";
wm->input_dev->open = wm97xx_ts_input_open;
wm->input_dev->close = wm97xx_ts_input_close;
- set_bit(EV_ABS, wm->input_dev->evbit);
- set_bit(ABS_X, wm->input_dev->absbit);
- set_bit(ABS_Y, wm->input_dev->absbit);
- set_bit(ABS_PRESSURE, wm->input_dev->absbit);
+
+ __set_bit(EV_ABS, wm->input_dev->evbit);
+ __set_bit(EV_KEY, wm->input_dev->evbit);
+ __set_bit(BTN_TOUCH, wm->input_dev->keybit);
+
input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
abs_x[2], 0);
input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
abs_y[2], 0);
input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
abs_p[2], 0);
+
input_set_drvdata(wm->input_dev, wm);
wm->input_dev->dev.parent = dev;
+
ret = input_register_device(wm->input_dev);
if (ret < 0)
goto dev_alloc_err;
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
new file mode 100644
index 00000000000..41e4359c277
--- /dev/null
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -0,0 +1,240 @@
+/*
+ * zylonite-wm97xx.c -- Zylonite Continuous Touch screen driver
+ *
+ * Copyright 2004, 2007, 2008 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ * Andrew Zabolotny <zap@homelink.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Notes:
+ * This is a wm97xx extended touch driver supporting interrupt driven
+ * and continuous operation on Marvell Zylonite development systems
+ * (which have a WM9713 on board).
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/wm97xx.h>
+
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/regs-ac97.h>
+
+struct continuous {
+ u16 id; /* codec id */
+ u8 code; /* continuous code */
+ u8 reads; /* number of coord reads per read cycle */
+ u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+ { WM9713_ID2, 0, WM_READS(94), 94 },
+ { WM9713_ID2, 1, WM_READS(120), 120 },
+ { WM9713_ID2, 2, WM_READS(154), 154 },
+ { WM9713_ID2, 3, WM_READS(188), 188 },
+};
+
+/* continuous speed index */
+static int sp_idx;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 200;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+
+/* flush AC97 slot 5 FIFO machines */
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+ int i;
+
+ msleep(1);
+
+ for (i = 0; i < 16; i++)
+ MODR;
+}
+
+static int wm97xx_acc_pen_down(struct wm97xx *wm)
+{
+ u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
+ int reads = 0;
+ static u16 last, tries;
+
+ /* When the AC97 queue has been drained we need to allow time
+ * to buffer up samples otherwise we end up spinning polling
+ * for samples. The controller can't have a suitably low
+ * threashold set to use the notifications it gives.
+ */
+ msleep(1);
+
+ if (tries > 5) {
+ tries = 0;
+ return RC_PENUP;
+ }
+
+ x = MODR;
+ if (x == last) {
+ tries++;
+ return RC_AGAIN;
+ }
+ last = x;
+ do {
+ if (reads)
+ x = MODR;
+ y = MODR;
+ if (pressure)
+ p = MODR;
+
+ /* are samples valid */
+ if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
+ (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
+ (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+ goto up;
+
+ /* coordinate is good */
+ tries = 0;
+ input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
+ input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
+ input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+ input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
+ input_sync(wm->input_dev);
+ reads++;
+ } while (reads < cinfo[sp_idx].reads);
+up:
+ return RC_PENDOWN | RC_AGAIN;
+}
+
+static int wm97xx_acc_startup(struct wm97xx *wm)
+{
+ int idx;
+
+ /* check we have a codec */
+ if (wm->ac97 == NULL)
+ return -ENODEV;
+
+ /* Go you big red fire engine */
+ for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+ if (wm->id != cinfo[idx].id)
+ continue;
+ sp_idx = idx;
+ if (cont_rate <= cinfo[idx].speed)
+ break;
+ }
+ wm->acc_rate = cinfo[sp_idx].code;
+ wm->acc_slot = ac97_touch_slot;
+ dev_info(wm->dev,
+ "zylonite accelerated touchscreen driver, %d samples/sec\n",
+ cinfo[sp_idx].speed);
+
+ return 0;
+}
+
+static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+ if (enable)
+ enable_irq(wm->pen_irq);
+ else
+ disable_irq_nosync(wm->pen_irq);
+}
+
+static struct wm97xx_mach_ops zylonite_mach_ops = {
+ .acc_enabled = 1,
+ .acc_pen_up = wm97xx_acc_pen_up,
+ .acc_pen_down = wm97xx_acc_pen_down,
+ .acc_startup = wm97xx_acc_startup,
+ .irq_enable = wm97xx_irq_enable,
+ .irq_gpio = WM97XX_GPIO_2,
+};
+
+static int zylonite_wm97xx_probe(struct platform_device *pdev)
+{
+ struct wm97xx *wm = platform_get_drvdata(pdev);
+ int gpio_touch_irq;
+
+ if (cpu_is_pxa320())
+ gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15);
+ else
+ gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+ wm->pen_irq = IRQ_GPIO(gpio_touch_irq);
+ set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH);
+
+ wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+ WM97XX_GPIO_POL_HIGH,
+ WM97XX_GPIO_STICKY,
+ WM97XX_GPIO_WAKE);
+ wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
+ WM97XX_GPIO_POL_HIGH,
+ WM97XX_GPIO_NOTSTICKY,
+ WM97XX_GPIO_NOWAKE);
+
+ return wm97xx_register_mach_ops(wm, &zylonite_mach_ops);
+}
+
+static int zylonite_wm97xx_remove(struct platform_device *pdev)
+{
+ struct wm97xx *wm = platform_get_drvdata(pdev);
+
+ wm97xx_unregister_mach_ops(wm);
+
+ return 0;
+}
+
+static struct platform_driver zylonite_wm97xx_driver = {
+ .probe = zylonite_wm97xx_probe,
+ .remove = zylonite_wm97xx_remove,
+ .driver = {
+ .name = "wm97xx-touch",
+ },
+};
+
+static int __init zylonite_wm97xx_init(void)
+{
+ return platform_driver_register(&zylonite_wm97xx_driver);
+}
+
+static void __exit zylonite_wm97xx_exit(void)
+{
+ platform_driver_unregister(&zylonite_wm97xx_driver);
+}
+
+module_init(zylonite_wm97xx_init);
+module_exit(zylonite_wm97xx_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for Zylonite");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 07:15:14 +0000