aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/dibusb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/dibusb')
-rw-r--r--drivers/media/dvb/dibusb/Kconfig62
-rw-r--r--drivers/media/dvb/dibusb/Makefile11
-rw-r--r--drivers/media/dvb/dibusb/dvb-dibusb-core.c558
-rw-r--r--drivers/media/dvb/dibusb/dvb-dibusb-dvb.c185
-rw-r--r--drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c582
-rw-r--r--drivers/media/dvb/dibusb/dvb-dibusb-firmware.c87
-rw-r--r--drivers/media/dvb/dibusb/dvb-dibusb-remote.c316
-rw-r--r--drivers/media/dvb/dibusb/dvb-dibusb-usb.c303
-rw-r--r--drivers/media/dvb/dibusb/dvb-dibusb.h327
-rw-r--r--drivers/media/dvb/dibusb/dvb-fe-dtt200u.c263
10 files changed, 2694 insertions, 0 deletions
diff --git a/drivers/media/dvb/dibusb/Kconfig b/drivers/media/dvb/dibusb/Kconfig
new file mode 100644
index 00000000000..74dfc73ae5b
--- /dev/null
+++ b/drivers/media/dvb/dibusb/Kconfig
@@ -0,0 +1,62 @@
+config DVB_DIBUSB
+ tristate "DiBcom USB DVB-T devices (see help for a complete device list)"
+ depends on DVB_CORE && USB
+ select FW_LOADER
+ select DVB_DIB3000MB
+ select DVB_DIB3000MC
+ select DVB_MT352
+ help
+ Support for USB 1.1 and 2.0 DVB-T devices based on reference designs made by
+ DiBcom (http://www.dibcom.fr) and C&E.
+
+ Devices supported by this driver:
+
+ TwinhanDTV USB-Ter (VP7041)
+ TwinhanDTV Magic Box (VP7041e)
+ KWorld/JetWay/ADSTech V-Stream XPERT DTV - DVB-T USB1.1 and USB2.0
+ Hama DVB-T USB-Box
+ DiBcom reference devices (non-public)
+ Ultima Electronic/Artec T1 USB TVBOX
+ Compro Videomate DVB-U2000 - DVB-T USB
+ Grandtec DVB-T USB
+ Avermedia AverTV DVBT USB
+ Artec T1 USB1.1 and USB2.0 boxes
+ Yakumo/Typhoon DVB-T USB2.0
+ Hanftek UMT-010 USB2.0
+ Hauppauge WinTV NOVA-T USB2
+
+ The VP7041 seems to be identical to "CTS Portable" (Chinese
+ Television System).
+
+ These devices can be understood as budget ones, they "only" deliver
+ (a part of) the MPEG2 transport stream.
+
+ A firmware is needed to get the device working. See Documentation/dvb/README.dibusb
+ details.
+
+ Say Y if you own such a device and want to use it. You should build it as
+ a module.
+
+config DVB_DIBUSB_MISDESIGNED_DEVICES
+ bool "Enable support for some misdesigned (see help) devices, which identify with wrong IDs"
+ depends on DVB_DIBUSB
+ help
+ Somehow Artec/Ultima Electronic forgot to program the eeprom of some of their
+ USB1.1/USB2.0 devices.
+ So comes that they identify with the default Vendor and Product ID of the Cypress
+ CY7C64613 (AN2235) or Cypress FX2.
+
+ Affected device IDs:
+ 0x0574:0x2235 (Artec T1 USB1.1, cold)
+ 0x04b4:0x8613 (Artec T1 USB2.0, cold)
+ 0x0574:0x1002 (Artec T1 USB2.0, warm)
+ 0x0574:0x2131 (aged DiBcom USB1.1 test device)
+
+ Say Y if your device has one of the mentioned IDs.
+
+config DVB_DIBCOM_DEBUG
+ bool "Enable extended debug support for DiBcom USB device"
+ depends on DVB_DIBUSB
+ help
+ Say Y if you want to enable debuging. See modinfo dvb-dibusb for
+ debug levels.
diff --git a/drivers/media/dvb/dibusb/Makefile b/drivers/media/dvb/dibusb/Makefile
new file mode 100644
index 00000000000..e941c508624
--- /dev/null
+++ b/drivers/media/dvb/dibusb/Makefile
@@ -0,0 +1,11 @@
+dvb-dibusb-objs = dvb-dibusb-core.o \
+ dvb-dibusb-dvb.o \
+ dvb-dibusb-fe-i2c.o \
+ dvb-dibusb-firmware.o \
+ dvb-dibusb-remote.o \
+ dvb-dibusb-usb.o \
+ dvb-fe-dtt200u.o
+
+obj-$(CONFIG_DVB_DIBUSB) += dvb-dibusb.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-core.c b/drivers/media/dvb/dibusb/dvb-dibusb-core.c
new file mode 100644
index 00000000000..26235f9247e
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-core.c
@@ -0,0 +1,558 @@
+/*
+ * Driver for mobile USB Budget DVB-T devices based on reference
+ * design made by DiBcom (http://www.dibcom.fr/)
+ *
+ * dvb-dibusb-core.c
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * based on GPL code from DiBcom, which has
+ * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
+ *
+ * Remote control code added by David Matthews (dm@prolingua.co.uk)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ * Acknowledgements
+ *
+ * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
+ * sources, on which this driver (and the dib3000mb/mc/p frontends) are based.
+ *
+ * see Documentation/dvb/README.dibusb for more information
+ */
+#include "dvb-dibusb.h"
+
+#include <linux/moduleparam.h>
+
+/* debug */
+int dvb_dibusb_debug;
+module_param_named(debug, dvb_dibusb_debug, int, 0644);
+
+#ifdef CONFIG_DVB_DIBCOM_DEBUG
+#define DBSTATUS ""
+#else
+#define DBSTATUS " (debugging is not enabled)"
+#endif
+MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=alotmore,8=ts,16=err,32=rc (|-able))." DBSTATUS);
+#undef DBSTATUS
+
+static int pid_parse;
+module_param(pid_parse, int, 0644);
+MODULE_PARM_DESC(pid_parse, "enable pid parsing (filtering) when running at USB2.0");
+
+static int rc_query_interval = 100;
+module_param(rc_query_interval, int, 0644);
+MODULE_PARM_DESC(rc_query_interval, "interval in msecs for remote control query (default: 100; min: 40)");
+
+static int rc_key_repeat_count = 2;
+module_param(rc_key_repeat_count, int, 0644);
+MODULE_PARM_DESC(rc_key_repeat_count, "how many key repeats will be dropped before passing the key event again (default: 2)");
+
+/* Vendor IDs */
+#define USB_VID_ADSTECH 0x06e1
+#define USB_VID_ANCHOR 0x0547
+#define USB_VID_AVERMEDIA 0x14aa
+#define USB_VID_COMPRO 0x185b
+#define USB_VID_COMPRO_UNK 0x145f
+#define USB_VID_CYPRESS 0x04b4
+#define USB_VID_DIBCOM 0x10b8
+#define USB_VID_EMPIA 0xeb1a
+#define USB_VID_GRANDTEC 0x5032
+#define USB_VID_HANFTEK 0x15f4
+#define USB_VID_HAUPPAUGE 0x2040
+#define USB_VID_HYPER_PALTEK 0x1025
+#define USB_VID_IMC_NETWORKS 0x13d3
+#define USB_VID_TWINHAN 0x1822
+#define USB_VID_ULTIMA_ELECTRONIC 0x05d8
+
+/* Product IDs */
+#define USB_PID_ADSTECH_USB2_COLD 0xa333
+#define USB_PID_ADSTECH_USB2_WARM 0xa334
+#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001
+#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002
+#define USB_PID_COMPRO_DVBU2000_COLD 0xd000
+#define USB_PID_COMPRO_DVBU2000_WARM 0xd001
+#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c
+#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d
+#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8
+#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9
+#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6
+#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7
+#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
+#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0
+#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1
+#define USB_PID_KWORLD_VSTREAM_COLD 0x17de
+#define USB_PID_KWORLD_VSTREAM_WARM 0x17df
+#define USB_PID_TWINHAN_VP7041_COLD 0x3201
+#define USB_PID_TWINHAN_VP7041_WARM 0x3202
+#define USB_PID_ULTIMA_TVBOX_COLD 0x8105
+#define USB_PID_ULTIMA_TVBOX_WARM 0x8106
+#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107
+#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108
+#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235
+#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109
+#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613
+#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002
+#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e
+#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f
+#define USB_PID_HANFTEK_UMT_010_COLD 0x0001
+#define USB_PID_HANFTEK_UMT_010_WARM 0x0015
+#define USB_PID_YAKUMO_DTT200U_COLD 0x0201
+#define USB_PID_YAKUMO_DTT200U_WARM 0x0301
+#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300
+#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
+
+/* USB Driver stuff
+ * table of devices that this driver is working with
+ *
+ * ATTENTION: Never ever change the order of this table, the particular
+ * devices depend on this order
+ *
+ * Each entry is used as a reference in the device_struct. Currently this is
+ * the only non-redundant way of assigning USB ids to actual devices I'm aware
+ * of, because there is only one place in the code where the assignment of
+ * vendor and product id is done, here.
+ */
+static struct usb_device_id dib_table [] = {
+/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB_COLD)},
+/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB_WARM)},
+/* 02 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_YAKUMO_DTT200U_COLD) },
+/* 03 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_YAKUMO_DTT200U_WARM) },
+
+/* 04 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) },
+/* 05 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) },
+/* 06 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) },
+/* 07 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) },
+/* 08 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) },
+/* 09 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) },
+/* 10 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) },
+/* 11 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) },
+/* 12 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) },
+/* 13 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) },
+/* 14 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) },
+/* 15 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) },
+/* 16 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) },
+/* 17 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) },
+/* 18 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) },
+/* 19 */ { USB_DEVICE(USB_VID_IMC_NETWORKS, USB_PID_TWINHAN_VP7041_COLD) },
+/* 20 */ { USB_DEVICE(USB_VID_IMC_NETWORKS, USB_PID_TWINHAN_VP7041_WARM) },
+/* 21 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) },
+/* 22 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) },
+/* 23 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) },
+/* 24 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) },
+/* 25 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
+/* 26 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
+/* 27 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) },
+
+/* 28 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) },
+/* 29 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) },
+
+/* 30 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) },
+/* 31 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) },
+/* 32 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) },
+/* 33 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) },
+/*
+ * activate the following define when you have one of the devices and want to
+ * build it from build-2.6 in dvb-kernel
+ */
+// #define CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES
+#ifdef CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES
+/* 34 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
+/* 35 */ { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ULTIMA_TVBOX_USB2_FX_COLD) },
+/* 36 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_USB2_FX_WARM) },
+/* 37 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_DIBCOM_ANCHOR_2135_COLD) },
+#endif
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, dib_table);
+
+static struct dibusb_usb_controller dibusb_usb_ctrl[] = {
+ { .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 },
+ { .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 },
+ { .name = "Cypress FX2", .cpu_cs_register = 0xe600 },
+};
+
+struct dibusb_tuner dibusb_tuner[] = {
+ { DIBUSB_TUNER_CABLE_THOMSON,
+ 0x61
+ },
+ { DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5,
+ 0x60
+ },
+ { DIBUSB_TUNER_CABLE_LG_TDTP_E102P,
+ 0x61
+ },
+ { DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5,
+ 0x60
+ },
+};
+
+static struct dibusb_demod dibusb_demod[] = {
+ { DIBUSB_DIB3000MB,
+ 16,
+ { 0x8, 0 },
+ },
+ { DIBUSB_DIB3000MC,
+ 32,
+ { 0x9, 0xa, 0xb, 0xc },
+ },
+ { DIBUSB_MT352,
+ 254,
+ { 0xf, 0 },
+ },
+ { DTT200U_FE,
+ 8,
+ { 0xff,0 }, /* there is no i2c bus in this device */
+ }
+};
+
+static struct dibusb_device_class dibusb_device_classes[] = {
+ { .id = DIBUSB1_1, .usb_ctrl = &dibusb_usb_ctrl[0],
+ .firmware = "dvb-dibusb-5.0.0.11.fw",
+ .pipe_cmd = 0x01, .pipe_data = 0x02,
+ .urb_count = 7, .urb_buffer_size = 4096,
+ DIBUSB_RC_NEC_PROTOCOL,
+ &dibusb_demod[DIBUSB_DIB3000MB],
+ &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON],
+ },
+ { DIBUSB1_1_AN2235, &dibusb_usb_ctrl[1],
+ "dvb-dibusb-an2235-1.fw",
+ 0x01, 0x02,
+ 7, 4096,
+ DIBUSB_RC_NEC_PROTOCOL,
+ &dibusb_demod[DIBUSB_DIB3000MB],
+ &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON],
+ },
+ { DIBUSB2_0,&dibusb_usb_ctrl[2],
+ "dvb-dibusb-6.0.0.5.fw",
+ 0x01, 0x06,
+ 7, 4096,
+ DIBUSB_RC_NEC_PROTOCOL,
+ &dibusb_demod[DIBUSB_DIB3000MC],
+ &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5],
+ },
+ { UMT2_0, &dibusb_usb_ctrl[2],
+ "dvb-dibusb-umt-2.fw",
+ 0x01, 0x06,
+ 20, 512,
+ DIBUSB_RC_NO,
+ &dibusb_demod[DIBUSB_MT352],
+ &dibusb_tuner[DIBUSB_TUNER_CABLE_LG_TDTP_E102P],
+ },
+ { DIBUSB2_0B,&dibusb_usb_ctrl[2],
+ "dvb-dibusb-adstech-usb2-1.fw",
+ 0x01, 0x06,
+ 7, 4096,
+ DIBUSB_RC_NEC_PROTOCOL,
+ &dibusb_demod[DIBUSB_DIB3000MB],
+ &dibusb_tuner[DIBUSB_TUNER_CABLE_THOMSON],
+ },
+ { NOVAT_USB2,&dibusb_usb_ctrl[2],
+ "dvb-dibusb-nova-t-1.fw",
+ 0x01, 0x06,
+ 7, 4096,
+ DIBUSB_RC_HAUPPAUGE_PROTO,
+ &dibusb_demod[DIBUSB_DIB3000MC],
+ &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5],
+ },
+ { DTT200U,&dibusb_usb_ctrl[2],
+ "dvb-dtt200u-1.fw",
+ 0x01, 0x02,
+ 7, 4096,
+ DIBUSB_RC_NO,
+ &dibusb_demod[DTT200U_FE],
+ NULL, /* no explicit tuner/pll-programming necessary (it has the ENV57H1XD5) */
+ },
+};
+
+static struct dibusb_usb_device dibusb_devices[] = {
+ { "TwinhanDTV USB1.1 / Magic Box / HAMA USB1.1 DVB-T device",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[19], &dib_table[21], NULL},
+ { &dib_table[20], &dib_table[22], NULL},
+ },
+ { "KWorld V-Stream XPERT DTV - DVB-T USB1.1",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[11], NULL },
+ { &dib_table[12], NULL },
+ },
+ { "Grandtec USB1.1 DVB-T",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[13], &dib_table[15], NULL },
+ { &dib_table[14], &dib_table[16], NULL },
+ },
+ { "DiBcom USB1.1 DVB-T reference design (MOD3000)",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[7], NULL },
+ { &dib_table[8], NULL },
+ },
+ { "Artec T1 USB1.1 TVBOX with AN2135",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[23], NULL },
+ { &dib_table[24], NULL },
+ },
+ { "Artec T1 USB1.1 TVBOX with AN2235",
+ &dibusb_device_classes[DIBUSB1_1_AN2235],
+ { &dib_table[25], NULL },
+ { &dib_table[26], NULL },
+ },
+ { "Avermedia AverTV DVBT USB1.1",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[0], NULL },
+ { &dib_table[1], NULL },
+ },
+ { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[4], &dib_table[6], NULL},
+ { &dib_table[5], NULL },
+ },
+ { "Unkown USB1.1 DVB-T device ???? please report the name to the author",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[17], NULL },
+ { &dib_table[18], NULL },
+ },
+ { "DiBcom USB2.0 DVB-T reference design (MOD3000P)",
+ &dibusb_device_classes[DIBUSB2_0],
+ { &dib_table[9], NULL },
+ { &dib_table[10], NULL },
+ },
+ { "Artec T1 USB2.0 TVBOX (please report the warm ID)",
+ &dibusb_device_classes[DIBUSB2_0],
+ { &dib_table[27], NULL },
+ { NULL },
+ },
+ { "Hauppauge WinTV NOVA-T USB2",
+ &dibusb_device_classes[NOVAT_USB2],
+ { &dib_table[30], NULL },
+ { &dib_table[31], NULL },
+ },
+ { "DTT200U (Yakumo/Hama/Typhoon) DVB-T USB2.0",
+ &dibusb_device_classes[DTT200U],
+ { &dib_table[2], NULL },
+ { &dib_table[3], NULL },
+ },
+ { "Hanftek UMT-010 DVB-T USB2.0",
+ &dibusb_device_classes[UMT2_0],
+ { &dib_table[28], NULL },
+ { &dib_table[29], NULL },
+ },
+ { "KWorld/ADSTech Instant DVB-T USB 2.0",
+ &dibusb_device_classes[DIBUSB2_0B],
+ { &dib_table[32], NULL },
+ { &dib_table[33], NULL }, /* device ID with default DIBUSB2_0-firmware */
+ },
+#ifdef CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES
+ { "Artec T1 USB1.1 TVBOX with AN2235 (misdesigned)",
+ &dibusb_device_classes[DIBUSB1_1_AN2235],
+ { &dib_table[34], NULL },
+ { NULL },
+ },
+ { "Artec T1 USB2.0 TVBOX with FX2 IDs (misdesigned, please report the warm ID)",
+ &dibusb_device_classes[DTT200U],
+ { &dib_table[35], NULL },
+ { &dib_table[36], NULL }, /* undefined, it could be that the device will get another USB ID in warm state */
+ },
+ { "DiBcom USB1.1 DVB-T reference design (MOD3000) with AN2135 default IDs",
+ &dibusb_device_classes[DIBUSB1_1],
+ { &dib_table[37], NULL },
+ { NULL },
+ },
+#endif
+};
+
+static int dibusb_exit(struct usb_dibusb *dib)
+{
+ deb_info("init_state before exiting everything: %x\n",dib->init_state);
+ dibusb_remote_exit(dib);
+ dibusb_fe_exit(dib);
+ dibusb_i2c_exit(dib);
+ dibusb_dvb_exit(dib);
+ dibusb_urb_exit(dib);
+ deb_info("init_state should be zero now: %x\n",dib->init_state);
+ dib->init_state = DIBUSB_STATE_INIT;
+ kfree(dib);
+ return 0;
+}
+
+static int dibusb_init(struct usb_dibusb *dib)
+{
+ int ret = 0;
+ sema_init(&dib->usb_sem, 1);
+ sema_init(&dib->i2c_sem, 1);
+
+ dib->init_state = DIBUSB_STATE_INIT;
+
+ if ((ret = dibusb_urb_init(dib)) ||
+ (ret = dibusb_dvb_init(dib)) ||
+ (ret = dibusb_i2c_init(dib))) {
+ dibusb_exit(dib);
+ return ret;
+ }
+
+ if ((ret = dibusb_fe_init(dib)))
+ err("could not initialize a frontend.");
+
+ if ((ret = dibusb_remote_init(dib)))
+ err("could not initialize remote control.");
+
+ return 0;
+}
+
+static struct dibusb_usb_device * dibusb_device_class_quirk(struct usb_device *udev, struct dibusb_usb_device *dev)
+{
+ int i;
+
+ /* Quirk for the Kworld/ADSTech Instant USB2.0 device. It has the same USB
+ * IDs like the USB1.1 KWorld after loading the firmware. Which is a bad
+ * idea and make this quirk necessary.
+ */
+ if (dev->dev_cl->id == DIBUSB1_1 && udev->speed == USB_SPEED_HIGH) {
+ info("this seems to be the Kworld/ADSTech Instant USB2.0 device or equal.");
+ for (i = 0; i < sizeof(dibusb_devices)/sizeof(struct dibusb_usb_device); i++) {
+ if (dibusb_devices[i].dev_cl->id == DIBUSB2_0B) {
+ dev = &dibusb_devices[i];
+ break;
+ }
+ }
+ }
+
+ return dev;
+}
+
+static struct dibusb_usb_device * dibusb_find_device (struct usb_device *udev,int *cold)
+{
+ int i,j;
+ struct dibusb_usb_device *dev = NULL;
+ *cold = -1;
+
+ for (i = 0; i < sizeof(dibusb_devices)/sizeof(struct dibusb_usb_device); i++) {
+ for (j = 0; j < DIBUSB_ID_MAX_NUM && dibusb_devices[i].cold_ids[j] != NULL; j++) {
+ deb_info("check for cold %x %x\n",dibusb_devices[i].cold_ids[j]->idVendor, dibusb_devices[i].cold_ids[j]->idProduct);
+ if (dibusb_devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
+ dibusb_devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
+ *cold = 1;
+ dev = &dibusb_devices[i];
+ break;
+ }
+ }
+
+ if (dev != NULL)
+ break;
+
+ for (j = 0; j < DIBUSB_ID_MAX_NUM && dibusb_devices[i].warm_ids[j] != NULL; j++) {
+ deb_info("check for warm %x %x\n",dibusb_devices[i].warm_ids[j]->idVendor, dibusb_devices[i].warm_ids[j]->idProduct);
+ if (dibusb_devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) &&
+ dibusb_devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) {
+ *cold = 0;
+ dev = &dibusb_devices[i];
+ break;
+ }
+ }
+ }
+
+ if (dev != NULL)
+ dev = dibusb_device_class_quirk(udev,dev);
+
+ return dev;
+}
+
+/*
+ * USB
+ */
+static int dibusb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_dibusb *dib = NULL;
+ struct dibusb_usb_device *dibdev = NULL;
+
+ int ret = -ENOMEM,cold=0;
+
+ if ((dibdev = dibusb_find_device(udev,&cold)) == NULL) {
+ err("something went very wrong, "
+ "unknown product ID: %.4x",le16_to_cpu(udev->descriptor.idProduct));
+ return -ENODEV;
+ }
+
+ if (cold == 1) {
+ info("found a '%s' in cold state, will try to load a firmware",dibdev->name);
+ ret = dibusb_loadfirmware(udev,dibdev);
+ } else {
+ info("found a '%s' in warm state.",dibdev->name);
+ dib = kmalloc(sizeof(struct usb_dibusb),GFP_KERNEL);
+ if (dib == NULL) {
+ err("no memory");
+ return ret;
+ }
+ memset(dib,0,sizeof(struct usb_dibusb));
+
+ dib->udev = udev;
+ dib->dibdev = dibdev;
+
+ /* store parameters to structures */
+ dib->rc_query_interval = rc_query_interval;
+ dib->pid_parse = pid_parse;
+ dib->rc_key_repeat_count = rc_key_repeat_count;
+
+ usb_set_intfdata(intf, dib);
+
+ ret = dibusb_init(dib);
+ }
+
+ if (ret == 0)
+ info("%s successfully initialized and connected.",dibdev->name);
+ else
+ info("%s error while loading driver (%d)",dibdev->name,ret);
+ return ret;
+}
+
+static void dibusb_disconnect(struct usb_interface *intf)
+{
+ struct usb_dibusb *dib = usb_get_intfdata(intf);
+ const char *name = DRIVER_DESC;
+
+ usb_set_intfdata(intf,NULL);
+ if (dib != NULL && dib->dibdev != NULL) {
+ name = dib->dibdev->name;
+ dibusb_exit(dib);
+ }
+ info("%s successfully deinitialized and disconnected.",name);
+
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver dibusb_driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_DESC,
+ .probe = dibusb_probe,
+ .disconnect = dibusb_disconnect,
+ .id_table = dib_table,
+};
+
+/* module stuff */
+static int __init usb_dibusb_init(void)
+{
+ int result;
+ if ((result = usb_register(&dibusb_driver))) {
+ err("usb_register failed. Error number %d",result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit usb_dibusb_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&dibusb_driver);
+}
+
+module_init (usb_dibusb_init);
+module_exit (usb_dibusb_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c
new file mode 100644
index 00000000000..04e54ec093f
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c
@@ -0,0 +1,185 @@
+/*
+ * dvb-dibusb-dvb.c is part of the driver for mobile USB Budget DVB-T devices
+ * based on reference design made by DiBcom (http://www.dibcom.fr/)
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * see dvb-dibusb-core.c for more copyright details.
+ *
+ * This file contains functions for initializing and handling the
+ * linux-dvb API.
+ */
+#include "dvb-dibusb.h"
+
+#include <linux/usb.h>
+#include <linux/version.h>
+
+static u32 urb_compl_count;
+
+/*
+ * MPEG2 TS DVB stuff
+ */
+void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs)
+{
+ struct usb_dibusb *dib = urb->context;
+
+ deb_ts("urb complete feedcount: %d, status: %d, length: %d\n",dib->feedcount,urb->status,
+ urb->actual_length);
+
+ urb_compl_count++;
+ if (urb_compl_count % 1000 == 0)
+ deb_info("%d urbs completed so far.\n",urb_compl_count);
+
+ switch (urb->status) {
+ case 0: /* success */
+ case -ETIMEDOUT: /* NAK */
+ break;
+ case -ECONNRESET: /* kill */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ default: /* error */
+ deb_ts("urb completition error %d.", urb->status);
+ break;
+ }
+
+ if (dib->feedcount > 0 && urb->actual_length > 0) {
+ if (dib->init_state & DIBUSB_STATE_DVB)
+ dvb_dmx_swfilter(&dib->demux, (u8*) urb->transfer_buffer,urb->actual_length);
+ } else
+ deb_ts("URB dropped because of feedcount.\n");
+
+ usb_submit_urb(urb,GFP_ATOMIC);
+}
+
+static int dibusb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff)
+{
+ struct usb_dibusb *dib = dvbdmxfeed->demux->priv;
+ int newfeedcount;
+
+ if (dib == NULL)
+ return -ENODEV;
+
+ newfeedcount = dib->feedcount + (onoff ? 1 : -1);
+
+ /*
+ * stop feed before setting a new pid if there will be no pid anymore
+ */
+ if (newfeedcount == 0) {
+ deb_ts("stop feeding\n");
+ if (dib->xfer_ops.fifo_ctrl != NULL) {
+ if (dib->xfer_ops.fifo_ctrl(dib->fe,0)) {
+ err("error while inhibiting fifo.");
+ return -ENODEV;
+ }
+ }
+ dibusb_streaming(dib,0);
+ }
+
+ dib->feedcount = newfeedcount;
+
+ /* activate the pid on the device specific pid_filter */
+ deb_ts("setting pid: %5d %04x at index %d '%s'\n",dvbdmxfeed->pid,dvbdmxfeed->pid,dvbdmxfeed->index,onoff ? "on" : "off");
+ if (dib->pid_parse && dib->xfer_ops.pid_ctrl != NULL)
+ dib->xfer_ops.pid_ctrl(dib->fe,dvbdmxfeed->index,dvbdmxfeed->pid,onoff);
+
+ /*
+ * start the feed if this was the first pid to set and there is still a pid
+ * for reception.
+ */
+ if (dib->feedcount == onoff && dib->feedcount > 0) {
+
+ deb_ts("controlling pid parser\n");
+ if (dib->xfer_ops.pid_parse != NULL) {
+ if (dib->xfer_ops.pid_parse(dib->fe,dib->pid_parse) < 0) {
+ err("could not handle pid_parser");
+ }
+ }
+
+ deb_ts("start feeding\n");
+ if (dib->xfer_ops.fifo_ctrl != NULL) {
+ if (dib->xfer_ops.fifo_ctrl(dib->fe,1)) {
+ err("error while enabling fifo.");
+ return -ENODEV;
+ }
+ }
+ dibusb_streaming(dib,1);
+ }
+ return 0;
+}
+
+static int dibusb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type);
+ return dibusb_ctrl_feed(dvbdmxfeed,1);
+}
+
+static int dibusb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type);
+ return dibusb_ctrl_feed(dvbdmxfeed,0);
+}
+
+int dibusb_dvb_init(struct usb_dibusb *dib)
+{
+ int ret;
+
+ urb_compl_count = 0;
+
+ if ((ret = dvb_register_adapter(&dib->adapter, DRIVER_DESC,
+ THIS_MODULE)) < 0) {
+ deb_info("dvb_register_adapter failed: error %d", ret);
+ goto err;
+ }
+ dib->adapter->priv = dib;
+
+/* i2c is done in dibusb_i2c_init */
+
+ dib->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
+
+ dib->demux.priv = (void *)dib;
+ /* get pidcount from demod */
+ dib->demux.feednum = dib->demux.filternum = 255;
+ dib->demux.start_feed = dibusb_start_feed;
+ dib->demux.stop_feed = dibusb_stop_feed;
+ dib->demux.write_to_decoder = NULL;
+ if ((ret = dvb_dmx_init(&dib->demux)) < 0) {
+ err("dvb_dmx_init failed: error %d",ret);
+ goto err_dmx;
+ }
+
+ dib->dmxdev.filternum = dib->demux.filternum;
+ dib->dmxdev.demux = &dib->demux.dmx;
+ dib->dmxdev.capabilities = 0;
+ if ((ret = dvb_dmxdev_init(&dib->dmxdev, dib->adapter)) < 0) {
+ err("dvb_dmxdev_init failed: error %d",ret);
+ goto err_dmx_dev;
+ }
+
+ dvb_net_init(dib->adapter, &dib->dvb_net, &dib->demux.dmx);
+
+ goto success;
+err_dmx_dev:
+ dvb_dmx_release(&dib->demux);
+err_dmx:
+ dvb_unregister_adapter(dib->adapter);
+err:
+ return ret;
+success:
+ dib->init_state |= DIBUSB_STATE_DVB;
+ return 0;
+}
+
+int dibusb_dvb_exit(struct usb_dibusb *dib)
+{
+ if (dib->init_state & DIBUSB_STATE_DVB) {
+ dib->init_state &= ~DIBUSB_STATE_DVB;
+ deb_info("unregistering DVB part\n");
+ dvb_net_release(&dib->dvb_net);
+ dib->demux.dmx.close(&dib->demux.dmx);
+ dvb_dmxdev_release(&dib->dmxdev);
+ dvb_dmx_release(&dib->demux);
+ dvb_unregister_adapter(dib->adapter);
+ }
+ return 0;
+}
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c
new file mode 100644
index 00000000000..2ed89488c7c
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c
@@ -0,0 +1,582 @@
+/*
+ * dvb-dibusb-fe-i2c.c is part of the driver for mobile USB Budget DVB-T devices
+ * based on reference design made by DiBcom (http://www.dibcom.fr/)
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * see dvb-dibusb-core.c for more copyright details.
+ *
+ * This file contains functions for attaching, initializing of an appropriate
+ * demodulator/frontend. I2C-stuff is also located here.
+ *
+ */
+#include "dvb-dibusb.h"
+
+#include <linux/usb.h>
+
+static int dibusb_i2c_msg(struct usb_dibusb *dib, u8 addr,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */
+ /* write only ? */
+ int wo = (rbuf == NULL || rlen == 0),
+ len = 2 + wlen + (wo ? 0 : 2);
+
+ sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ;
+ sndbuf[1] = (addr << 1) | (wo ? 0 : 1);
+
+ memcpy(&sndbuf[2],wbuf,wlen);
+
+ if (!wo) {
+ sndbuf[wlen+2] = (rlen >> 8) & 0xff;
+ sndbuf[wlen+3] = rlen & 0xff;
+ }
+
+ return dibusb_readwrite_usb(dib,sndbuf,len,rbuf,rlen);
+}
+
+/*
+ * I2C master xfer function
+ */
+static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num)
+{
+ struct usb_dibusb *dib = i2c_get_adapdata(adap);
+ int i;
+
+ if (down_interruptible(&dib->i2c_sem) < 0)
+ return -EAGAIN;
+
+ if (num > 2)
+ warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+
+ for (i = 0; i < num; i++) {
+ /* write/read request */
+ if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
+ if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len,
+ msg[i+1].buf,msg[i+1].len) < 0)
+ break;
+ i++;
+ } else
+ if (dibusb_i2c_msg(dib, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
+ break;
+ }
+
+ up(&dib->i2c_sem);
+ return i;
+}
+
+static u32 dibusb_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm dibusb_algo = {
+ .name = "DiBcom USB i2c algorithm",
+ .id = I2C_ALGO_BIT,
+ .master_xfer = dibusb_i2c_xfer,
+ .functionality = dibusb_i2c_func,
+};
+
+static int dibusb_general_demod_init(struct dvb_frontend *fe);
+static u8 dibusb_general_pll_addr(struct dvb_frontend *fe);
+static int dibusb_general_pll_init(struct dvb_frontend *fe, u8 pll_buf[5]);
+static int dibusb_general_pll_set(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters* params, u8 pll_buf[5]);
+
+static struct mt352_config mt352_hanftek_umt_010_config = {
+ .demod_address = 0x1e,
+ .demod_init = dibusb_general_demod_init,
+ .pll_set = dibusb_general_pll_set,
+};
+
+static int dibusb_tuner_quirk(struct usb_dibusb *dib)
+{
+ switch (dib->dibdev->dev_cl->id) {
+ case DIBUSB1_1: /* some these device have the ENV77H11D5 and some the THOMSON CABLE */
+ case DIBUSB1_1_AN2235: { /* actually its this device, but in warm state they are indistinguishable */
+ struct dibusb_tuner *t;
+ u8 b[2] = { 0,0 } ,b2[1];
+ struct i2c_msg msg[2] = {
+ { .flags = 0, .buf = b, .len = 2 },
+ { .flags = I2C_M_RD, .buf = b2, .len = 1},
+ };
+
+ t = &dibusb_tuner[DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5];
+
+ msg[0].addr = msg[1].addr = t->pll_addr;
+
+ if (dib->xfer_ops.tuner_pass_ctrl != NULL)
+ dib->xfer_ops.tuner_pass_ctrl(dib->fe,1,t->pll_addr);
+ dibusb_i2c_xfer(&dib->i2c_adap,msg,2);
+ if (dib->xfer_ops.tuner_pass_ctrl != NULL)
+ dib->xfer_ops.tuner_pass_ctrl(dib->fe,0,t->pll_addr);
+
+ if (b2[0] == 0xfe)
+ info("this device has the Thomson Cable onboard. Which is default.");
+ else {
+ dib->tuner = t;
+ info("this device has the Panasonic ENV77H11D5 onboard.");
+ }
+ break;
+ }
+ default:
+ break;
+ }
+ return 0;
+}
+
+int dibusb_fe_init(struct usb_dibusb* dib)
+{
+ struct dib3000_config demod_cfg;
+ int i;
+
+ if (dib->init_state & DIBUSB_STATE_I2C) {
+ for (i = 0; i < sizeof(dib->dibdev->dev_cl->demod->i2c_addrs) / sizeof(unsigned char) &&
+ dib->dibdev->dev_cl->demod->i2c_addrs[i] != 0; i++) {
+
+ demod_cfg.demod_address = dib->dibdev->dev_cl->demod->i2c_addrs[i];
+ demod_cfg.pll_addr = dibusb_general_pll_addr;
+ demod_cfg.pll_set = dibusb_general_pll_set;
+ demod_cfg.pll_init = dibusb_general_pll_init;
+
+ deb_info("demod id: %d %d\n",dib->dibdev->dev_cl->demod->id,DTT200U_FE);
+
+ switch (dib->dibdev->dev_cl->demod->id) {
+ case DIBUSB_DIB3000MB:
+ dib->fe = dib3000mb_attach(&demod_cfg,&dib->i2c_adap,&dib->xfer_ops);
+ break;
+ case DIBUSB_DIB3000MC:
+ dib->fe = dib3000mc_attach(&demod_cfg,&dib->i2c_adap,&dib->xfer_ops);
+ break;
+ case DIBUSB_MT352:
+ mt352_hanftek_umt_010_config.demod_address = dib->dibdev->dev_cl->demod->i2c_addrs[i];
+ dib->fe = mt352_attach(&mt352_hanftek_umt_010_config, &dib->i2c_adap);
+ break;
+ case DTT200U_FE:
+ dib->fe = dtt200u_fe_attach(dib,&dib->xfer_ops);
+ break;
+ }
+ if (dib->fe != NULL) {
+ info("found demodulator at i2c address 0x%x",dib->dibdev->dev_cl->demod->i2c_addrs[i]);
+ break;
+ }
+ }
+ /* if a frontend was found */
+ if (dib->fe != NULL) {
+ if (dib->fe->ops->sleep != NULL)
+ dib->fe_sleep = dib->fe->ops->sleep;
+ dib->fe->ops->sleep = dibusb_hw_sleep;
+
+ if (dib->fe->ops->init != NULL )
+ dib->fe_init = dib->fe->ops->init;
+ dib->fe->ops->init = dibusb_hw_wakeup;
+
+ /* setting the default tuner */
+ dib->tuner = dib->dibdev->dev_cl->tuner;
+
+ /* check which tuner is mounted on this device, in case this is unsure */
+ dibusb_tuner_quirk(dib);
+ }
+ }
+ if (dib->fe == NULL) {
+ err("A frontend driver was not found for device '%s'.",
+ dib->dibdev->name);
+ return -ENODEV;
+ } else {
+ if (dvb_register_frontend(dib->adapter, dib->fe)) {
+ err("Frontend registration failed.");
+ if (dib->fe->ops->release)
+ dib->fe->ops->release(dib->fe);
+ dib->fe = NULL;
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+int dibusb_fe_exit(struct usb_dibusb *dib)
+{
+ if (dib->fe != NULL)
+ dvb_unregister_frontend(dib->fe);
+ return 0;
+}
+
+int dibusb_i2c_init(struct usb_dibusb *dib)
+{
+ int ret = 0;
+
+ dib->adapter->priv = dib;
+
+ strncpy(dib->i2c_adap.name,dib->dibdev->name,I2C_NAME_SIZE);
+#ifdef I2C_ADAP_CLASS_TV_DIGITAL
+ dib->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL,
+#else
+ dib->i2c_adap.class = I2C_CLASS_TV_DIGITAL,
+#endif
+ dib->i2c_adap.algo = &dibusb_algo;
+ dib->i2c_adap.algo_data = NULL;
+ dib->i2c_adap.id = I2C_ALGO_BIT;
+
+ i2c_set_adapdata(&dib->i2c_adap, dib);
+
+ if ((ret = i2c_add_adapter(&dib->i2c_adap)) < 0)
+ err("could not add i2c adapter");
+
+ dib->init_state |= DIBUSB_STATE_I2C;
+
+ return ret;
+}
+
+int dibusb_i2c_exit(struct usb_dibusb *dib)
+{
+ if (dib->init_state & DIBUSB_STATE_I2C)
+ i2c_del_adapter(&dib->i2c_adap);
+ dib->init_state &= ~DIBUSB_STATE_I2C;
+ return 0;
+}
+
+
+/* pll stuff, maybe removed soon (thx to Gerd/Andrew in advance) */
+static int thomson_cable_eu_pll_set(struct dvb_frontend_parameters *fep, u8 pllbuf[4])
+{
+ u32 tfreq = (fep->frequency + 36125000) / 62500;
+ int vu,p0,p1,p2;
+
+ if (fep->frequency > 403250000)
+ vu = 1, p2 = 1, p1 = 0, p0 = 1;
+ else if (fep->frequency > 115750000)
+ vu = 0, p2 = 1, p1 = 1, p0 = 0;
+ else if (fep->frequency > 44250000)
+ vu = 0, p2 = 0, p1 = 1, p0 = 1;
+ else
+ return -EINVAL;
+
+ pllbuf[0] = (tfreq >> 8) & 0x7f;
+ pllbuf[1] = tfreq & 0xff;
+ pllbuf[2] = 0x8e;
+ pllbuf[3] = (vu << 7) | (p2 << 2) | (p1 << 1) | p0;
+ return 0;
+}
+
+static int panasonic_cofdm_env57h1xd5_pll_set(struct dvb_frontend_parameters *fep, u8 pllbuf[4])
+{
+ u32 freq_khz = fep->frequency / 1000;
+ u32 tfreq = ((freq_khz + 36125)*6 + 500) / 1000;
+ u8 TA, T210, R210, ctrl1, cp210, p4321;
+ if (freq_khz > 858000) {
+ err("frequency cannot be larger than 858 MHz.");
+ return -EINVAL;
+ }
+
+ // contol data 1 : 1 | T/A=1 | T2,T1,T0 = 0,0,0 | R2,R1,R0 = 0,1,0
+ TA = 1;
+ T210 = 0;
+ R210 = 0x2;
+ ctrl1 = (1 << 7) | (TA << 6) | (T210 << 3) | R210;
+
+// ******** CHARGE PUMP CONFIG vs RF FREQUENCIES *****************
+ if (freq_khz < 470000)
+ cp210 = 2; // VHF Low and High band ch E12 to E4 to E12
+ else if (freq_khz < 526000)
+ cp210 = 4; // UHF band Ch E21 to E27
+ else // if (freq < 862000000)
+ cp210 = 5; // UHF band ch E28 to E69
+
+//********************* BW select *******************************
+ if (freq_khz < 153000)
+ p4321 = 1; // BW selected for VHF low
+ else if (freq_khz < 470000)
+ p4321 = 2; // BW selected for VHF high E5 to E12
+ else // if (freq < 862000000)
+ p4321 = 4; // BW selection for UHF E21 to E69
+
+ pllbuf[0] = (tfreq >> 8) & 0xff;
+ pllbuf[1] = (tfreq >> 0) & 0xff;
+ pllbuf[2] = 0xff & ctrl1;
+ pllbuf[3] = (cp210 << 5) | (p4321);
+
+ return 0;
+}
+
+/*
+ * 7 6 5 4 3 2 1 0
+ * Address Byte 1 1 0 0 0 MA1 MA0 R/~W=0
+ *
+ * Program divider byte 1 0 n14 n13 n12 n11 n10 n9 n8
+ * Program divider byte 2 n7 n6 n5 n4 n3 n2 n1 n0
+ *
+ * Control byte 1 1 T/A=1 T2 T1 T0 R2 R1 R0
+ * 1 T/A=0 0 0 ATC AL2 AL1 AL0
+ *
+ * Control byte 2 CP2 CP1 CP0 BS5 BS4 BS3 BS2 BS1
+ *
+ * MA0/1 = programmable address bits
+ * R/~W = read/write bit (0 for writing)
+ * N14-0 = programmable LO frequency
+ *
+ * T/A = test AGC bit (0 = next 6 bits AGC setting,
+ * 1 = next 6 bits test and reference divider ratio settings)
+ * T2-0 = test bits
+ * R2-0 = reference divider ratio and programmable frequency step
+ * ATC = AGC current setting and time constant
+ * ATC = 0: AGC current = 220nA, AGC time constant = 2s
+ * ATC = 1: AGC current = 9uA, AGC time constant = 50ms
+ * AL2-0 = AGC take-over point bits
+ * CP2-0 = charge pump current
+ * BS5-1 = PMOS ports control bits;
+ * BSn = 0 corresponding port is off, high-impedance state (at power-on)
+ * BSn = 1 corresponding port is on
+ */
+static int panasonic_cofdm_env77h11d5_tda6650_init(struct dvb_frontend *fe, u8 pllbuf[4])
+{
+ pllbuf[0] = 0x0b;
+ pllbuf[1] = 0xf5;
+ pllbuf[2] = 0x85;
+ pllbuf[3] = 0xab;
+ return 0;
+}
+
+static int panasonic_cofdm_env77h11d5_tda6650_set (struct dvb_frontend_parameters *fep,u8 pllbuf[4])
+{
+ int tuner_frequency = 0;
+ u8 band, cp, filter;
+
+ // determine charge pump
+ tuner_frequency = fep->frequency + 36166000;
+ if (tuner_frequency < 87000000)
+ return -EINVAL;
+ else if (tuner_frequency < 130000000)
+ cp = 3;
+ else if (tuner_frequency < 160000000)
+ cp = 5;
+ else if (tuner_frequency < 200000000)
+ cp = 6;
+ else if (tuner_frequency < 290000000)
+ cp = 3;
+ else if (tuner_frequency < 420000000)
+ cp = 5;
+ else if (tuner_frequency < 480000000)
+ cp = 6;
+ else if (tuner_frequency < 620000000)
+ cp = 3;
+ else if (tuner_frequency < 830000000)
+ cp = 5;
+ else if (tuner_frequency < 895000000)
+ cp = 7;
+ else
+ return -EINVAL;
+
+ // determine band
+ if (fep->frequency < 49000000)
+ return -EINVAL;
+ else if (fep->frequency < 161000000)
+ band = 1;
+ else if (fep->frequency < 444000000)
+ band = 2;
+ else if (fep->frequency < 861000000)
+ band = 4;
+ else
+ return -EINVAL;
+
+ // setup PLL filter
+ switch (fep->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ case BANDWIDTH_7_MHZ:
+ filter = 0;
+ break;
+ case BANDWIDTH_8_MHZ:
+ filter = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ // calculate divisor
+ // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
+ tuner_frequency = (((fep->frequency / 1000) * 6) + 217496) / 1000;
+
+ // setup tuner buffer
+ pllbuf[0] = (tuner_frequency >> 8) & 0x7f;
+ pllbuf[1] = tuner_frequency & 0xff;
+ pllbuf[2] = 0xca;
+ pllbuf[3] = (cp << 5) | (filter << 3) | band;
+ return 0;
+}
+
+/*
+ * 7 6 5 4 3 2 1 0
+ * Address Byte 1 1 0 0 0 MA1 MA0 R/~W=0
+ *
+ * Program divider byte 1 0 n14 n13 n12 n11 n10 n9 n8
+ * Program divider byte 2 n7 n6 n5 n4 n3 n2 n1 n0
+ *
+ * Control byte 1 CP T2 T1 T0 RSA RSB OS
+ *
+ * Band Switch byte X X X P4 P3 P2 P1 P0
+ *
+ * Auxiliary byte ATC AL2 AL1 AL0 0 0 0 0
+ *
+ * Address: MA1 MA0 Address
+ * 0 0 c0
+ * 0 1 c2 (always valid)
+ * 1 0 c4
+ * 1 1 c6
+ */
+static int lg_tdtp_e102p_tua6034(struct dvb_frontend_parameters* fep, u8 pllbuf[4])
+{
+ u32 div;
+ u8 p210, p3;
+
+#define TUNER_MUL 62500
+
+ div = (fep->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
+// div = ((fep->frequency/1000 + 36166) * 6) / 1000;
+
+ if (fep->frequency < 174500000)
+ p210 = 1; // not supported by the tdtp_e102p
+ else if (fep->frequency < 230000000) // VHF
+ p210 = 2;
+ else
+ p210 = 4;
+
+ if (fep->u.ofdm.bandwidth == BANDWIDTH_7_MHZ)
+ p3 = 0;
+ else
+ p3 = 1;
+
+ pllbuf[0] = (div >> 8) & 0x7f;
+ pllbuf[1] = div & 0xff;
+ pllbuf[2] = 0xce;
+// pllbuf[2] = 0xcc;
+ pllbuf[3] = (p3 << 3) | p210;
+
+ return 0;
+}
+
+static int lg_tdtp_e102p_mt352_demod_init(struct dvb_frontend *fe)
+{
+ static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d };
+ static u8 mt352_reset[] = { 0x50, 0x80 };
+ static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 };
+ static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 };
+
+ static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff };
+ static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff };
+ static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 };
+ static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 };
+ static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f };
+
+ static u8 mt352_acq_ctl[] = { 0x53, 0x50 };
+ static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio));
+
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+ mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+
+ mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1));
+ mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2));
+ mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3));
+ mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4));
+ mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5));
+
+ mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl));
+ mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1));
+
+ return 0;
+}
+
+static int dibusb_general_demod_init(struct dvb_frontend *fe)
+{
+ struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv;
+ switch (dib->dibdev->dev_cl->id) {
+ case UMT2_0:
+ return lg_tdtp_e102p_mt352_demod_init(fe);
+ default: /* other device classes do not have device specific demod inits */
+ break;
+ }
+ return 0;
+}
+
+static u8 dibusb_general_pll_addr(struct dvb_frontend *fe)
+{
+ struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv;
+ return dib->tuner->pll_addr;
+}
+
+static int dibusb_pll_i2c_helper(struct usb_dibusb *dib, u8 pll_buf[5], u8 buf[4])
+{
+ if (pll_buf == NULL) {
+ struct i2c_msg msg = {
+ .addr = dib->tuner->pll_addr,
+ .flags = 0,
+ .buf = buf,
+ .len = sizeof(buf)
+ };
+ if (i2c_transfer (&dib->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ msleep(1);
+ } else {
+ pll_buf[0] = dib->tuner->pll_addr << 1;
+ memcpy(&pll_buf[1],buf,4);
+ }
+
+ return 0;
+}
+
+static int dibusb_general_pll_init(struct dvb_frontend *fe,
+ u8 pll_buf[5])
+{
+ struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv;
+ u8 buf[4];
+ int ret=0;
+ switch (dib->tuner->id) {
+ case DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5:
+ ret = panasonic_cofdm_env77h11d5_tda6650_init(fe,buf);
+ break;
+ default:
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ return dibusb_pll_i2c_helper(dib,pll_buf,buf);
+}
+
+static int dibusb_general_pll_set(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *fep, u8 pll_buf[5])
+{
+ struct usb_dibusb* dib = (struct usb_dibusb*) fe->dvb->priv;
+ u8 buf[4];
+ int ret=0;
+
+ switch (dib->tuner->id) {
+ case DIBUSB_TUNER_CABLE_THOMSON:
+ ret = thomson_cable_eu_pll_set(fep, buf);
+ break;
+ case DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5:
+ ret = panasonic_cofdm_env57h1xd5_pll_set(fep, buf);
+ break;
+ case DIBUSB_TUNER_CABLE_LG_TDTP_E102P:
+ ret = lg_tdtp_e102p_tua6034(fep, buf);
+ break;
+ case DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5:
+ ret = panasonic_cofdm_env77h11d5_tda6650_set(fep,buf);
+ break;
+ default:
+ warn("no pll programming routine found for tuner %d.\n",dib->tuner->id);
+ ret = -ENODEV;
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ return dibusb_pll_i2c_helper(dib,pll_buf,buf);
+}
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c b/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c
new file mode 100644
index 00000000000..504ba47afdf
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-firmware.c
@@ -0,0 +1,87 @@
+/*
+ * dvb-dibusb-firmware.c is part of the driver for mobile USB Budget DVB-T devices
+ * based on reference design made by DiBcom (http://www.dibcom.fr/)
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * see dvb-dibusb-core.c for more copyright details.
+ *
+ * This file contains functions for downloading the firmware to the device.
+ */
+#include "dvb-dibusb.h"
+
+#include <linux/firmware.h>
+#include <linux/usb.h>
+
+/*
+ * load a firmware packet to the device
+ */
+static int dibusb_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len)
+{
+ return usb_control_msg(udev, usb_sndctrlpipe(udev,0),
+ 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000);
+}
+
+int dibusb_loadfirmware(struct usb_device *udev, struct dibusb_usb_device *dibdev)
+{
+ const struct firmware *fw = NULL;
+ u16 addr;
+ u8 *b,*p;
+ int ret = 0,i;
+
+ if ((ret = request_firmware(&fw, dibdev->dev_cl->firmware, &udev->dev)) != 0) {
+ err("did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+ dibdev->dev_cl->firmware);
+ return ret;
+ }
+
+ info("downloading firmware from file '%s'.",dibdev->dev_cl->firmware);
+
+ p = kmalloc(fw->size,GFP_KERNEL);
+ if (p != NULL) {
+ u8 reset;
+ /*
+ * you cannot use the fw->data as buffer for
+ * usb_control_msg, a new buffer has to be
+ * created
+ */
+ memcpy(p,fw->data,fw->size);
+
+ /* stop the CPU */
+ reset = 1;
+ if ((ret = dibusb_writemem(udev,dibdev->dev_cl->usb_ctrl->cpu_cs_register,&reset,1)) != 1)
+ err("could not stop the USB controller CPU.");
+ for(i = 0; p[i+3] == 0 && i < fw->size; ) {
+ b = (u8 *) &p[i];
+ addr = *((u16 *) &b[1]);
+
+ ret = dibusb_writemem(udev,addr,&b[4],b[0]);
+
+ if (ret != b[0]) {
+ err("error while transferring firmware "
+ "(transferred size: %d, block size: %d)",
+ ret,b[0]);
+ ret = -EINVAL;
+ break;
+ }
+ i += 5 + b[0];
+ }
+ /* length in ret */
+ if (ret > 0)
+ ret = 0;
+ /* restart the CPU */
+ reset = 0;
+ if (ret || dibusb_writemem(udev,dibdev->dev_cl->usb_ctrl->cpu_cs_register,&reset,1) != 1) {
+ err("could not restart the USB controller CPU.");
+ ret = -EINVAL;
+ }
+
+ kfree(p);
+ } else {
+ ret = -ENOMEM;
+ }
+ release_firmware(fw);
+
+ return ret;
+}
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-remote.c b/drivers/media/dvb/dibusb/dvb-dibusb-remote.c
new file mode 100644
index 00000000000..9dc8b15517b
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-remote.c
@@ -0,0 +1,316 @@
+/*
+ * dvb-dibusb-remote.c is part of the driver for mobile USB Budget DVB-T devices
+ * based on reference design made by DiBcom (http://www.dibcom.fr/)
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * see dvb-dibusb-core.c for more copyright details.
+ *
+ * This file contains functions for handling the event device on the software
+ * side and the remote control on the hardware side.
+ */
+#include "dvb-dibusb.h"
+
+/* Table to map raw key codes to key events. This should not be hard-wired
+ into the kernel. */
+static const struct { u8 c0, c1, c2; uint32_t key; } nec_rc_keys [] =
+{
+ /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
+ { 0x00, 0xff, 0x16, KEY_POWER },
+ { 0x00, 0xff, 0x10, KEY_MUTE },
+ { 0x00, 0xff, 0x03, KEY_1 },
+ { 0x00, 0xff, 0x01, KEY_2 },
+ { 0x00, 0xff, 0x06, KEY_3 },
+ { 0x00, 0xff, 0x09, KEY_4 },
+ { 0x00, 0xff, 0x1d, KEY_5 },
+ { 0x00, 0xff, 0x1f, KEY_6 },
+ { 0x00, 0xff, 0x0d, KEY_7 },
+ { 0x00, 0xff, 0x19, KEY_8 },
+ { 0x00, 0xff, 0x1b, KEY_9 },
+ { 0x00, 0xff, 0x15, KEY_0 },
+ { 0x00, 0xff, 0x05, KEY_CHANNELUP },
+ { 0x00, 0xff, 0x02, KEY_CHANNELDOWN },
+ { 0x00, 0xff, 0x1e, KEY_VOLUMEUP },
+ { 0x00, 0xff, 0x0a, KEY_VOLUMEDOWN },
+ { 0x00, 0xff, 0x11, KEY_RECORD },
+ { 0x00, 0xff, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */
+ { 0x00, 0xff, 0x14, KEY_PLAY },
+ { 0x00, 0xff, 0x1a, KEY_STOP },
+ { 0x00, 0xff, 0x40, KEY_REWIND },
+ { 0x00, 0xff, 0x12, KEY_FASTFORWARD },
+ { 0x00, 0xff, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */
+ { 0x00, 0xff, 0x4c, KEY_PAUSE },
+ { 0x00, 0xff, 0x4d, KEY_SCREEN }, /* Full screen mode. */
+ { 0x00, 0xff, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
+ /* additional keys TwinHan VisionPlus, the Artec seemingly not have */
+ { 0x00, 0xff, 0x0c, KEY_CANCEL }, /* Cancel */
+ { 0x00, 0xff, 0x1c, KEY_EPG }, /* EPG */
+ { 0x00, 0xff, 0x00, KEY_TAB }, /* Tab */
+ { 0x00, 0xff, 0x48, KEY_INFO }, /* Preview */
+ { 0x00, 0xff, 0x04, KEY_LIST }, /* RecordList */
+ { 0x00, 0xff, 0x0f, KEY_TEXT }, /* Teletext */
+ /* Key codes for the KWorld/ADSTech/JetWay remote. */
+ { 0x86, 0x6b, 0x12, KEY_POWER },
+ { 0x86, 0x6b, 0x0f, KEY_SELECT }, /* source */
+ { 0x86, 0x6b, 0x0c, KEY_UNKNOWN }, /* scan */
+ { 0x86, 0x6b, 0x0b, KEY_EPG },
+ { 0x86, 0x6b, 0x10, KEY_MUTE },
+ { 0x86, 0x6b, 0x01, KEY_1 },
+ { 0x86, 0x6b, 0x02, KEY_2 },
+ { 0x86, 0x6b, 0x03, KEY_3 },
+ { 0x86, 0x6b, 0x04, KEY_4 },
+ { 0x86, 0x6b, 0x05, KEY_5 },
+ { 0x86, 0x6b, 0x06, KEY_6 },
+ { 0x86, 0x6b, 0x07, KEY_7 },
+ { 0x86, 0x6b, 0x08, KEY_8 },
+ { 0x86, 0x6b, 0x09, KEY_9 },
+ { 0x86, 0x6b, 0x0a, KEY_0 },
+ { 0x86, 0x6b, 0x18, KEY_ZOOM },
+ { 0x86, 0x6b, 0x1c, KEY_UNKNOWN }, /* preview */
+ { 0x86, 0x6b, 0x13, KEY_UNKNOWN }, /* snap */
+ { 0x86, 0x6b, 0x00, KEY_UNDO },
+ { 0x86, 0x6b, 0x1d, KEY_RECORD },
+ { 0x86, 0x6b, 0x0d, KEY_STOP },
+ { 0x86, 0x6b, 0x0e, KEY_PAUSE },
+ { 0x86, 0x6b, 0x16, KEY_PLAY },
+ { 0x86, 0x6b, 0x11, KEY_BACK },
+ { 0x86, 0x6b, 0x19, KEY_FORWARD },
+ { 0x86, 0x6b, 0x14, KEY_UNKNOWN }, /* pip */
+ { 0x86, 0x6b, 0x15, KEY_ESC },
+ { 0x86, 0x6b, 0x1a, KEY_UP },
+ { 0x86, 0x6b, 0x1e, KEY_DOWN },
+ { 0x86, 0x6b, 0x1f, KEY_LEFT },
+ { 0x86, 0x6b, 0x1b, KEY_RIGHT },
+};
+
+/* Hauppauge NOVA-T USB2 keys */
+static const struct { u16 raw; uint32_t key; } haupp_rc_keys [] = {
+ { 0xddf, KEY_GOTO },
+ { 0xdef, KEY_POWER },
+ { 0xce7, KEY_TV },
+ { 0xcc7, KEY_VIDEO },
+ { 0xccf, KEY_AUDIO },
+ { 0xcd7, KEY_MEDIA },
+ { 0xcdf, KEY_EPG },
+ { 0xca7, KEY_UP },
+ { 0xc67, KEY_RADIO },
+ { 0xcb7, KEY_LEFT },
+ { 0xd2f, KEY_OK },
+ { 0xcbf, KEY_RIGHT },
+ { 0xcff, KEY_BACK },
+ { 0xcaf, KEY_DOWN },
+ { 0xc6f, KEY_MENU },
+ { 0xc87, KEY_VOLUMEUP },
+ { 0xc8f, KEY_VOLUMEDOWN },
+ { 0xc97, KEY_CHANNEL },
+ { 0xc7f, KEY_MUTE },
+ { 0xd07, KEY_CHANNELUP },
+ { 0xd0f, KEY_CHANNELDOWN },
+ { 0xdbf, KEY_RECORD },
+ { 0xdb7, KEY_STOP },
+ { 0xd97, KEY_REWIND },
+ { 0xdaf, KEY_PLAY },
+ { 0xda7, KEY_FASTFORWARD },
+ { 0xd27, KEY_LAST }, /* Skip backwards */
+ { 0xd87, KEY_PAUSE },
+ { 0xcf7, KEY_NEXT },
+ { 0xc07, KEY_0 },
+ { 0xc0f, KEY_1 },
+ { 0xc17, KEY_2 },
+ { 0xc1f, KEY_3 },
+ { 0xc27, KEY_4 },
+ { 0xc2f, KEY_5 },
+ { 0xc37, KEY_6 },
+ { 0xc3f, KEY_7 },
+ { 0xc47, KEY_8 },
+ { 0xc4f, KEY_9 },
+ { 0xc57, KEY_KPASTERISK },
+ { 0xc77, KEY_GRAVE }, /* # */
+ { 0xc5f, KEY_RED },
+ { 0xd77, KEY_GREEN },
+ { 0xdc7, KEY_YELLOW },
+ { 0xd4f, KEY_BLUE},
+};
+
+static int dibusb_key2event_nec(struct usb_dibusb *dib,u8 rb[5])
+{
+ int i;
+ switch (rb[0]) {
+ case DIBUSB_RC_NEC_KEY_PRESSED:
+ /* rb[1-3] is the actual key, rb[4] is a checksum */
+ deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+ rb[1], rb[2], rb[3], rb[4]);
+
+ if ((0xff - rb[3]) != rb[4]) {
+ deb_rc("remote control checksum failed.\n");
+ break;
+ }
+
+ /* See if we can match the raw key code. */
+ for (i = 0; i < sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) {
+ if (nec_rc_keys[i].c0 == rb[1] &&
+ nec_rc_keys[i].c1 == rb[2] &&
+ nec_rc_keys[i].c2 == rb[3]) {
+
+ dib->last_event = nec_rc_keys[i].key;
+ return 1;
+ }
+ }
+ break;
+ case DIBUSB_RC_NEC_KEY_REPEATED:
+ /* rb[1]..rb[4] are always zero.*/
+ /* Repeats often seem to occur so for the moment just ignore this. */
+ return 0;
+ case DIBUSB_RC_NEC_EMPTY: /* No (more) remote control keys. */
+ default:
+ break;
+ }
+ return -1;
+}
+
+static int dibusb_key2event_hauppauge(struct usb_dibusb *dib,u8 rb[4])
+{
+ u16 raw;
+ int i,state;
+ switch (rb[0]) {
+ case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED:
+ raw = ((rb[1] & 0x0f) << 8) | rb[2];
+
+ state = !!(rb[1] & 0x40);
+
+ deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to %04x state: %d\n",rb[1],rb[2],rb[3],raw,state);
+ for (i = 0; i < sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) {
+ if (haupp_rc_keys[i].raw == raw) {
+ if (dib->last_event == haupp_rc_keys[i].key &&
+ dib->last_state == state) {
+ deb_rc("key repeat\n");
+ return 0;
+ } else {
+ dib->last_event = haupp_rc_keys[i].key;
+ dib->last_state = state;
+ return 1;
+ }
+ }
+ }
+
+ break;
+ case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY:
+ default:
+ break;
+ }
+ return -1;
+}
+
+/*
+ * Read the remote control and feed the appropriate event.
+ * NEC protocol is used for remote controls
+ */
+static int dibusb_read_remote_control(struct usb_dibusb *dib)
+{
+ u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5];
+ int ret,event = 0;
+
+ if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5)))
+ return ret;
+
+ switch (dib->dibdev->dev_cl->remote_type) {
+ case DIBUSB_RC_NEC_PROTOCOL:
+ event = dibusb_key2event_nec(dib,rb);
+ break;
+ case DIBUSB_RC_HAUPPAUGE_PROTO:
+ event = dibusb_key2event_hauppauge(dib,rb);
+ default:
+ break;
+ }
+
+ /* key repeat */
+ if (event == 0)
+ if (++dib->repeat_key_count < dib->rc_key_repeat_count) {
+ deb_rc("key repeat dropped. (%d)\n",dib->repeat_key_count);
+ event = -1; /* skip this key repeat */
+ }
+
+ if (event == 1 || event == 0) {
+ deb_rc("Translated key 0x%04x\n",event);
+
+ /* Signal down and up events for this key. */
+ input_report_key(&dib->rc_input_dev, dib->last_event, 1);
+ input_report_key(&dib->rc_input_dev, dib->last_event, 0);
+ input_sync(&dib->rc_input_dev);
+
+ if (event == 1)
+ dib->repeat_key_count = 0;
+ }
+ return 0;
+}
+
+/* Remote-control poll function - called every dib->rc_query_interval ms to see
+ whether the remote control has received anything. */
+static void dibusb_remote_query(void *data)
+{
+ struct usb_dibusb *dib = (struct usb_dibusb *) data;
+ /* TODO: need a lock here. We can simply skip checking for the remote control
+ if we're busy. */
+ dibusb_read_remote_control(dib);
+ schedule_delayed_work(&dib->rc_query_work,
+ msecs_to_jiffies(dib->rc_query_interval));
+}
+
+int dibusb_remote_init(struct usb_dibusb *dib)
+{
+ int i;
+
+ if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO)
+ return 0;
+
+ /* Initialise the remote-control structures.*/
+ init_input_dev(&dib->rc_input_dev);
+
+ dib->rc_input_dev.evbit[0] = BIT(EV_KEY);
+ dib->rc_input_dev.keycodesize = sizeof(unsigned char);
+ dib->rc_input_dev.keycodemax = KEY_MAX;
+ dib->rc_input_dev.name = DRIVER_DESC " remote control";
+
+ switch (dib->dibdev->dev_cl->remote_type) {
+ case DIBUSB_RC_NEC_PROTOCOL:
+ for (i=0; i<sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++)
+ set_bit(nec_rc_keys[i].key, dib->rc_input_dev.keybit);
+ break;
+ case DIBUSB_RC_HAUPPAUGE_PROTO:
+ for (i=0; i<sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++)
+ set_bit(haupp_rc_keys[i].key, dib->rc_input_dev.keybit);
+ break;
+ default:
+ break;
+ }
+
+
+ input_register_device(&dib->rc_input_dev);
+
+ INIT_WORK(&dib->rc_query_work, dibusb_remote_query, dib);
+
+ /* Start the remote-control polling. */
+ if (dib->rc_query_interval < 40)
+ dib->rc_query_interval = 100; /* default */
+
+ info("schedule remote query interval to %d msecs.",dib->rc_query_interval);
+ schedule_delayed_work(&dib->rc_query_work,msecs_to_jiffies(dib->rc_query_interval));
+
+ dib->init_state |= DIBUSB_STATE_REMOTE;
+
+ return 0;
+}
+
+int dibusb_remote_exit(struct usb_dibusb *dib)
+{
+ if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO)
+ return 0;
+
+ if (dib->init_state & DIBUSB_STATE_REMOTE) {
+ cancel_delayed_work(&dib->rc_query_work);
+ flush_scheduled_work();
+ input_unregister_device(&dib->rc_input_dev);
+ }
+ dib->init_state &= ~DIBUSB_STATE_REMOTE;
+ return 0;
+}
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c b/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
new file mode 100644
index 00000000000..642f0596a5b
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
@@ -0,0 +1,303 @@
+/*
+ * dvb-dibusb-usb.c is part of the driver for mobile USB Budget DVB-T devices
+ * based on reference design made by DiBcom (http://www.dibcom.fr/)
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * see dvb-dibusb-core.c for more copyright details.
+ *
+ * This file contains functions for initializing and handling the
+ * usb specific stuff.
+ */
+#include "dvb-dibusb.h"
+
+#include <linux/version.h>
+#include <linux/pci.h>
+
+int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf,
+ u16 rlen)
+{
+ int actlen,ret = -ENOMEM;
+
+ if (wbuf == NULL || wlen == 0)
+ return -EINVAL;
+
+ if ((ret = down_interruptible(&dib->usb_sem)))
+ return ret;
+
+ debug_dump(wbuf,wlen);
+
+ ret = usb_bulk_msg(dib->udev,usb_sndbulkpipe(dib->udev,
+ dib->dibdev->dev_cl->pipe_cmd), wbuf,wlen,&actlen,
+ DIBUSB_I2C_TIMEOUT);
+
+ if (ret)
+ err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
+ else
+ ret = actlen != wlen ? -1 : 0;
+
+ /* an answer is expected, and no error before */
+ if (!ret && rbuf && rlen) {
+ ret = usb_bulk_msg(dib->udev,usb_rcvbulkpipe(dib->udev,
+ dib->dibdev->dev_cl->pipe_cmd),rbuf,rlen,&actlen,
+ DIBUSB_I2C_TIMEOUT);
+
+ if (ret)
+ err("recv bulk message failed: %d",ret);
+ else {
+ deb_alot("rlen: %d\n",rlen);
+ debug_dump(rbuf,actlen);
+ }
+ }
+
+ up(&dib->usb_sem);
+ return ret;
+}
+
+/*
+ * Cypress controls
+ */
+int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len)
+{
+ return dibusb_readwrite_usb(dib,buf,len,NULL,0);
+}
+
+#if 0
+/*
+ * #if 0'ing the following functions as they are not in use _now_,
+ * but probably will be sometime.
+ */
+/*
+ * do not use this, just a workaround for a bug,
+ * which will hopefully never occur :).
+ */
+int dibusb_interrupt_read_loop(struct usb_dibusb *dib)
+{
+ u8 b[1] = { DIBUSB_REQ_INTR_READ };
+ return dibusb_write_usb(dib,b,1);
+}
+#endif
+
+/*
+ * ioctl for the firmware
+ */
+static int dibusb_ioctl_cmd(struct usb_dibusb *dib, u8 cmd, u8 *param, int plen)
+{
+ u8 b[34];
+ int size = plen > 32 ? 32 : plen;
+ memset(b,0,34);
+ b[0] = DIBUSB_REQ_SET_IOCTL;
+ b[1] = cmd;
+
+ if (size > 0)
+ memcpy(&b[2],param,size);
+
+ return dibusb_write_usb(dib,b,34); //2+size);
+}
+
+/*
+ * ioctl for power control
+ */
+int dibusb_hw_wakeup(struct dvb_frontend *fe)
+{
+ struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv;
+ u8 b[1] = { DIBUSB_IOCTL_POWER_WAKEUP };
+ deb_info("dibusb-device is getting up.\n");
+
+ switch (dib->dibdev->dev_cl->id) {
+ case DTT200U:
+ break;
+ default:
+ dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
+ break;
+ }
+
+ if (dib->fe_init)
+ return dib->fe_init(fe);
+
+ return 0;
+}
+
+int dibusb_hw_sleep(struct dvb_frontend *fe)
+{
+ struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv;
+ u8 b[1] = { DIBUSB_IOCTL_POWER_SLEEP };
+ deb_info("dibusb-device is going to bed.\n");
+ /* workaround, something is wrong, when dibusb 1.1 device are going to bed too late */
+ switch (dib->dibdev->dev_cl->id) {
+ case DIBUSB1_1:
+ case NOVAT_USB2:
+ case DTT200U:
+ break;
+ default:
+ dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
+ break;
+ }
+ if (dib->fe_sleep)
+ return dib->fe_sleep(fe);
+
+ return 0;
+}
+
+int dibusb_set_streaming_mode(struct usb_dibusb *dib,u8 mode)
+{
+ u8 b[2] = { DIBUSB_REQ_SET_STREAMING_MODE, mode };
+ return dibusb_readwrite_usb(dib,b,2,NULL,0);
+}
+
+static int dibusb_urb_kill(struct usb_dibusb *dib)
+{
+ int i;
+deb_info("trying to kill urbs\n");
+ if (dib->init_state & DIBUSB_STATE_URB_SUBMIT) {
+ for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
+ deb_info("killing URB no. %d.\n",i);
+
+ /* stop the URB */
+ usb_kill_urb(dib->urb_list[i]);
+ }
+ } else
+ deb_info(" URBs not killed.\n");
+ dib->init_state &= ~DIBUSB_STATE_URB_SUBMIT;
+ return 0;
+}
+
+static int dibusb_urb_submit(struct usb_dibusb *dib)
+{
+ int i,ret;
+ if (dib->init_state & DIBUSB_STATE_URB_INIT) {
+ for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
+ deb_info("submitting URB no. %d\n",i);
+ if ((ret = usb_submit_urb(dib->urb_list[i],GFP_ATOMIC))) {
+ err("could not submit buffer urb no. %d - get them all back\n",i);
+ dibusb_urb_kill(dib);
+ return ret;
+ }
+ dib->init_state |= DIBUSB_STATE_URB_SUBMIT;
+ }
+ }
+ return 0;
+}
+
+int dibusb_streaming(struct usb_dibusb *dib,int onoff)
+{
+ if (onoff)
+ dibusb_urb_submit(dib);
+ else
+ dibusb_urb_kill(dib);
+
+ switch (dib->dibdev->dev_cl->id) {
+ case DIBUSB2_0:
+ case DIBUSB2_0B:
+ case NOVAT_USB2:
+ case UMT2_0:
+ if (onoff)
+ return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_ENABLE_STREAM,NULL,0);
+ else
+ return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_DISABLE_STREAM,NULL,0);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+int dibusb_urb_init(struct usb_dibusb *dib)
+{
+ int i,bufsize,def_pid_parse = 1;
+
+ /*
+ * when reloading the driver w/o replugging the device
+ * a timeout occures, this helps
+ */
+ usb_clear_halt(dib->udev,usb_sndbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd));
+ usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd));
+ usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data));
+
+ /* allocate the array for the data transfer URBs */
+ dib->urb_list = kmalloc(dib->dibdev->dev_cl->urb_count*sizeof(struct urb *),GFP_KERNEL);
+ if (dib->urb_list == NULL)
+ return -ENOMEM;
+ memset(dib->urb_list,0,dib->dibdev->dev_cl->urb_count*sizeof(struct urb *));
+
+ dib->init_state |= DIBUSB_STATE_URB_LIST;
+
+ bufsize = dib->dibdev->dev_cl->urb_count*dib->dibdev->dev_cl->urb_buffer_size;
+ deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize);
+ /* allocate the actual buffer for the URBs */
+ if ((dib->buffer = pci_alloc_consistent(NULL,bufsize,&dib->dma_handle)) == NULL) {
+ deb_info("not enough memory.\n");
+ return -ENOMEM;
+ }
+ deb_info("allocation complete\n");
+ memset(dib->buffer,0,bufsize);
+
+ dib->init_state |= DIBUSB_STATE_URB_BUF;
+
+ /* allocate and submit the URBs */
+ for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
+ if (!(dib->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) {
+ return -ENOMEM;
+ }
+
+ usb_fill_bulk_urb( dib->urb_list[i], dib->udev,
+ usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data),
+ &dib->buffer[i*dib->dibdev->dev_cl->urb_buffer_size],
+ dib->dibdev->dev_cl->urb_buffer_size,
+ dibusb_urb_complete, dib);
+
+ dib->urb_list[i]->transfer_flags = 0;
+
+ dib->init_state |= DIBUSB_STATE_URB_INIT;
+ }
+
+ /* dib->pid_parse here contains the value of the module parameter */
+ /* decide if pid parsing can be deactivated:
+ * is possible (by device type) and wanted (by user)
+ */
+ switch (dib->dibdev->dev_cl->id) {
+ case DIBUSB2_0:
+ case DIBUSB2_0B:
+ if (dib->udev->speed == USB_SPEED_HIGH && !dib->pid_parse) {
+ def_pid_parse = 0;
+ info("running at HIGH speed, will deliver the complete TS.");
+ } else
+ info("will use pid_parsing.");
+ break;
+ default:
+ break;
+ }
+ /* from here on it contains the device and user decision */
+ dib->pid_parse = def_pid_parse;
+
+ return 0;
+}
+
+int dibusb_urb_exit(struct usb_dibusb *dib)
+{
+ int i;
+
+ dibusb_urb_kill(dib);
+
+ if (dib->init_state & DIBUSB_STATE_URB_LIST) {
+ for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
+ if (dib->urb_list[i] != NULL) {
+ deb_info("freeing URB no. %d.\n",i);
+ /* free the URBs */
+ usb_free_urb(dib->urb_list[i]);
+ }
+ }
+ /* free the urb array */
+ kfree(dib->urb_list);
+ dib->init_state &= ~DIBUSB_STATE_URB_LIST;
+ }
+
+ if (dib->init_state & DIBUSB_STATE_URB_BUF)
+ pci_free_consistent(NULL,
+ dib->dibdev->dev_cl->urb_buffer_size*dib->dibdev->dev_cl->urb_count,
+ dib->buffer,dib->dma_handle);
+
+ dib->init_state &= ~DIBUSB_STATE_URB_BUF;
+ dib->init_state &= ~DIBUSB_STATE_URB_INIT;
+ return 0;
+}
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb.h b/drivers/media/dvb/dibusb/dvb-dibusb.h
new file mode 100644
index 00000000000..52cd35dd9d8
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-dibusb.h
@@ -0,0 +1,327 @@
+/*
+ * dvb-dibusb.h
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ * for more information see dvb-dibusb-core.c .
+ */
+#ifndef __DVB_DIBUSB_H__
+#define __DVB_DIBUSB_H__
+
+#include <linux/input.h>
+#include <linux/config.h>
+#include <linux/usb.h>
+
+#include "dvb_frontend.h"
+#include "dvb_demux.h"
+#include "dvb_net.h"
+#include "dmxdev.h"
+
+#include "dib3000.h"
+#include "mt352.h"
+
+/* debug */
+#ifdef CONFIG_DVB_DIBCOM_DEBUG
+#define dprintk(level,args...) \
+ do { if ((dvb_dibusb_debug & level)) { printk(args); } } while (0)
+
+#define debug_dump(b,l) {\
+ int i; \
+ for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \
+ deb_xfer("\n");\
+}
+
+#else
+#define dprintk(args...)
+#define debug_dump(b,l)
+#endif
+
+extern int dvb_dibusb_debug;
+
+/* Version information */
+#define DRIVER_VERSION "0.3"
+#define DRIVER_DESC "DiBcom based USB Budget DVB-T device"
+#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
+
+#define deb_info(args...) dprintk(0x01,args)
+#define deb_xfer(args...) dprintk(0x02,args)
+#define deb_alot(args...) dprintk(0x04,args)
+#define deb_ts(args...) dprintk(0x08,args)
+#define deb_err(args...) dprintk(0x10,args)
+#define deb_rc(args...) dprintk(0x20,args)
+
+/* generic log methods - taken from usb.h */
+#undef err
+#define err(format, arg...) printk(KERN_ERR "dvb-dibusb: " format "\n" , ## arg)
+#undef info
+#define info(format, arg...) printk(KERN_INFO "dvb-dibusb: " format "\n" , ## arg)
+#undef warn
+#define warn(format, arg...) printk(KERN_WARNING "dvb-dibusb: " format "\n" , ## arg)
+
+struct dibusb_usb_controller {
+ const char *name; /* name of the usb controller */
+ u16 cpu_cs_register; /* needs to be restarted, when the firmware has been downloaded. */
+};
+
+typedef enum {
+ DIBUSB1_1 = 0,
+ DIBUSB1_1_AN2235,
+ DIBUSB2_0,
+ UMT2_0,
+ DIBUSB2_0B,
+ NOVAT_USB2,
+ DTT200U,
+} dibusb_class_t;
+
+typedef enum {
+ DIBUSB_TUNER_CABLE_THOMSON = 0,
+ DIBUSB_TUNER_COFDM_PANASONIC_ENV57H1XD5,
+ DIBUSB_TUNER_CABLE_LG_TDTP_E102P,
+ DIBUSB_TUNER_COFDM_PANASONIC_ENV77H11D5,
+} dibusb_tuner_t;
+
+typedef enum {
+ DIBUSB_DIB3000MB = 0,
+ DIBUSB_DIB3000MC,
+ DIBUSB_MT352,
+ DTT200U_FE,
+} dibusb_demodulator_t;
+
+typedef enum {
+ DIBUSB_RC_NO = 0,
+ DIBUSB_RC_NEC_PROTOCOL,
+ DIBUSB_RC_HAUPPAUGE_PROTO,
+} dibusb_remote_t;
+
+struct dibusb_tuner {
+ dibusb_tuner_t id;
+
+ u8 pll_addr; /* tuner i2c address */
+};
+extern struct dibusb_tuner dibusb_tuner[];
+
+#define DIBUSB_POSSIBLE_I2C_ADDR_NUM 4
+struct dibusb_demod {
+ dibusb_demodulator_t id;
+
+ int pid_filter_count; /* counter of the internal pid_filter */
+ u8 i2c_addrs[DIBUSB_POSSIBLE_I2C_ADDR_NUM]; /* list of possible i2c addresses of the demod */
+};
+
+#define DIBUSB_MAX_TUNER_NUM 2
+struct dibusb_device_class {
+ dibusb_class_t id;
+
+ const struct dibusb_usb_controller *usb_ctrl; /* usb controller */
+ const char *firmware; /* valid firmware filenames */
+
+ int pipe_cmd; /* command pipe (read/write) */
+ int pipe_data; /* data pipe */
+
+ int urb_count; /* number of data URBs to be submitted */
+ int urb_buffer_size; /* the size of the buffer for each URB */
+
+ dibusb_remote_t remote_type; /* does this device have a ir-receiver */
+
+ struct dibusb_demod *demod; /* which demodulator is mount */
+ struct dibusb_tuner *tuner; /* which tuner can be found here */
+};
+
+#define DIBUSB_ID_MAX_NUM 15
+struct dibusb_usb_device {
+ const char *name; /* real name of the box */
+ struct dibusb_device_class *dev_cl; /* which dibusb_device_class is this device part of */
+
+ struct usb_device_id *cold_ids[DIBUSB_ID_MAX_NUM]; /* list of USB ids when this device is at pre firmware state */
+ struct usb_device_id *warm_ids[DIBUSB_ID_MAX_NUM]; /* list of USB ids when this device is at post firmware state */
+};
+
+/* a PID for the pid_filter list, when in use */
+struct dibusb_pid
+{
+ int index;
+ u16 pid;
+ int active;
+};
+
+struct usb_dibusb {
+ /* usb */
+ struct usb_device * udev;
+
+ struct dibusb_usb_device * dibdev;
+
+#define DIBUSB_STATE_INIT 0x000
+#define DIBUSB_STATE_URB_LIST 0x001
+#define DIBUSB_STATE_URB_BUF 0x002
+#define DIBUSB_STATE_URB_INIT 0x004
+#define DIBUSB_STATE_DVB 0x008
+#define DIBUSB_STATE_I2C 0x010
+#define DIBUSB_STATE_REMOTE 0x020
+#define DIBUSB_STATE_URB_SUBMIT 0x040
+ int init_state;
+
+ int feedcount;
+ struct dib_fe_xfer_ops xfer_ops;
+
+ struct dibusb_tuner *tuner;
+
+ struct urb **urb_list;
+ u8 *buffer;
+ dma_addr_t dma_handle;
+
+ /* I2C */
+ struct i2c_adapter i2c_adap;
+
+ /* locking */
+ struct semaphore usb_sem;
+ struct semaphore i2c_sem;
+
+ /* dvb */
+ struct dvb_adapter *adapter;
+ struct dmxdev dmxdev;
+ struct dvb_demux demux;
+ struct dvb_net dvb_net;
+ struct dvb_frontend* fe;
+
+ int (*fe_sleep) (struct dvb_frontend *);
+ int (*fe_init) (struct dvb_frontend *);
+
+ /* remote control */
+ struct input_dev rc_input_dev;
+ struct work_struct rc_query_work;
+ int last_event;
+ int last_state; /* for Hauppauge RC protocol */
+ int repeat_key_count;
+ int rc_key_repeat_count; /* module parameter */
+
+ /* module parameters */
+ int pid_parse;
+ int rc_query_interval;
+};
+
+/* commonly used functions in the separated files */
+
+/* dvb-dibusb-firmware.c */
+int dibusb_loadfirmware(struct usb_device *udev, struct dibusb_usb_device *dibdev);
+
+/* dvb-dibusb-remote.c */
+int dibusb_remote_exit(struct usb_dibusb *dib);
+int dibusb_remote_init(struct usb_dibusb *dib);
+
+/* dvb-dibusb-fe-i2c.c */
+int dibusb_fe_init(struct usb_dibusb* dib);
+int dibusb_fe_exit(struct usb_dibusb *dib);
+int dibusb_i2c_init(struct usb_dibusb *dib);
+int dibusb_i2c_exit(struct usb_dibusb *dib);
+
+/* dvb-dibusb-dvb.c */
+void dibusb_urb_complete(struct urb *urb, struct pt_regs *ptregs);
+int dibusb_dvb_init(struct usb_dibusb *dib);
+int dibusb_dvb_exit(struct usb_dibusb *dib);
+
+/* dvb-dibusb-usb.c */
+int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf,
+ u16 rlen);
+int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len);
+
+int dibusb_hw_wakeup(struct dvb_frontend *);
+int dibusb_hw_sleep(struct dvb_frontend *);
+int dibusb_set_streaming_mode(struct usb_dibusb *,u8);
+int dibusb_streaming(struct usb_dibusb *,int);
+
+int dibusb_urb_init(struct usb_dibusb *);
+int dibusb_urb_exit(struct usb_dibusb *);
+
+/* dvb-fe-dtt200u.c */
+struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *,struct dib_fe_xfer_ops *);
+
+/* i2c and transfer stuff */
+#define DIBUSB_I2C_TIMEOUT 5000
+
+/*
+ * protocol of all dibusb related devices
+ */
+
+/*
+ * bulk msg to/from endpoint 0x01
+ *
+ * general structure:
+ * request_byte parameter_bytes
+ */
+
+#define DIBUSB_REQ_START_READ 0x00
+#define DIBUSB_REQ_START_DEMOD 0x01
+
+/*
+ * i2c read
+ * bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word
+ * bulk read: byte_buffer (length_word bytes)
+ */
+#define DIBUSB_REQ_I2C_READ 0x02
+
+/*
+ * i2c write
+ * bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes
+ */
+#define DIBUSB_REQ_I2C_WRITE 0x03
+
+/*
+ * polling the value of the remote control
+ * bulk write: 0x04
+ * bulk read: byte_buffer (5 bytes)
+ *
+ * first byte of byte_buffer shows the status (0x00, 0x01, 0x02)
+ */
+#define DIBUSB_REQ_POLL_REMOTE 0x04
+
+#define DIBUSB_RC_NEC_EMPTY 0x00
+#define DIBUSB_RC_NEC_KEY_PRESSED 0x01
+#define DIBUSB_RC_NEC_KEY_REPEATED 0x02
+
+/* additional status values for Hauppauge Remote Control Protocol */
+#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01
+#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03
+
+/* streaming mode:
+ * bulk write: 0x05 mode_byte
+ *
+ * mode_byte is mostly 0x00
+ */
+#define DIBUSB_REQ_SET_STREAMING_MODE 0x05
+
+/* interrupt the internal read loop, when blocking */
+#define DIBUSB_REQ_INTR_READ 0x06
+
+/* io control
+ * 0x07 cmd_byte param_bytes
+ *
+ * param_bytes can be up to 32 bytes
+ *
+ * cmd_byte function parameter name
+ * 0x00 power mode
+ * 0x00 sleep
+ * 0x01 wakeup
+ *
+ * 0x01 enable streaming
+ * 0x02 disable streaming
+ *
+ *
+ */
+#define DIBUSB_REQ_SET_IOCTL 0x07
+
+/* IOCTL commands */
+
+/* change the power mode in firmware */
+#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00
+#define DIBUSB_IOCTL_POWER_SLEEP 0x00
+#define DIBUSB_IOCTL_POWER_WAKEUP 0x01
+
+/* modify streaming of the FX2 */
+#define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01
+#define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02
+
+#endif
diff --git a/drivers/media/dvb/dibusb/dvb-fe-dtt200u.c b/drivers/media/dvb/dibusb/dvb-fe-dtt200u.c
new file mode 100644
index 00000000000..1872aa6d200
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-fe-dtt200u.c
@@ -0,0 +1,263 @@
+/*
+ * dvb-dtt200u-fe.c is a driver which implements the frontend-part of the
+ * Yakumo/Typhoon/Hama USB2.0 boxes. It is hard-wired to the dibusb-driver as
+ * it uses the usb-transfer functions directly (maybe creating a
+ * generic-dvb-usb-lib for all usb-drivers will be reduce some more code.)
+ *
+ * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de>
+ *
+ * see dvb-dibusb-core.c for copyright details.
+ */
+
+/* guessed protocol description (reverse engineered):
+ * read
+ * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1
+ * 81 - <TS_LOCK> <current frequency divided by 250000>
+ * 82 - crash - do not touch
+ * 83 - crash - do not touch
+ * 84 - remote control
+ * 85 - crash - do not touch (OK, stop testing here)
+ * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal)
+ * 89 - noise-to-signal
+ * 8a - unkown 1 byte - signal_strength
+ * 8c - ber ???
+ * 8d - ber
+ * 8e - unc
+ *
+ * write
+ * 02 - bandwidth
+ * 03 - frequency (divided by 250000)
+ * 04 - pid table (index pid(7:0) pid(12:8))
+ * 05 - reset the pid table
+ * 08 - demod transfer enabled or not (FX2 transfer is enabled by default)
+ */
+
+#include "dvb-dibusb.h"
+#include "dvb_frontend.h"
+
+struct dtt200u_fe_state {
+ struct usb_dibusb *dib;
+
+ struct dvb_frontend_parameters fep;
+ struct dvb_frontend frontend;
+};
+
+#define moan(which,what) info("unexpected value in '%s' for cmd '%02x' - please report to linux-dvb@linuxtv.org",which,what)
+
+static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat)
+{
+ struct dtt200u_fe_state *state = fe->demodulator_priv;
+ u8 bw[1] = { 0x81 };
+ u8 br[3] = { 0 };
+// u8 bdeb[5] = { 0 };
+
+ dibusb_readwrite_usb(state->dib,bw,1,br,3);
+ switch (br[0]) {
+ case 0x01:
+ *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+ break;
+ case 0x00:
+ *stat = 0;
+ break;
+ default:
+ moan("br[0]",0x81);
+ break;
+ }
+
+// bw[0] = 0x88;
+// dibusb_readwrite_usb(state->dib,bw,1,bdeb,5);
+
+// deb_info("%02x: %02x %02x %02x %02x %02x\n",bw[0],bdeb[0],bdeb[1],bdeb[2],bdeb[3],bdeb[4]);
+
+ return 0;
+}
+static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
+{
+ struct dtt200u_fe_state *state = fe->demodulator_priv;
+ u8 bw[1] = { 0x8d };
+ *ber = 0;
+ dibusb_readwrite_usb(state->dib,bw,1,(u8*) ber, 3);
+ return 0;
+}
+
+static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
+{
+ struct dtt200u_fe_state *state = fe->demodulator_priv;
+ u8 bw[1] = { 0x8c };
+ *unc = 0;
+ dibusb_readwrite_usb(state->dib,bw,1,(u8*) unc, 3);
+ return 0;
+}
+
+static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
+{
+ struct dtt200u_fe_state *state = fe->demodulator_priv;
+ u8 bw[1] = { 0x8a };
+ u8 b;
+ dibusb_readwrite_usb(state->dib,bw,1,&b, 1);
+ *strength = (b << 8) | b;
+ return 0;
+}
+
+static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+ struct dtt200u_fe_state *state = fe->demodulator_priv;
+ u8 bw[1] = { 0x89 };
+ u8 br[1] = { 0 };
+ dibusb_readwrite_usb(state->dib,bw,1,br,1);
+ *snr = ((0xff - br[0]) << 8) | (0xff - br[0]);
+ return 0;
+}
+
+static int dtt200u_fe_init(struct dvb_frontend* fe)
+{
+ struct dtt200u_fe_state *state = fe->demodulator_priv;
+ u8 b[] = { 0x01 };
+ return dibusb_write_usb(state->dib,b,1);
+}
+
+static int dtt200u_fe_sleep(struct dvb_frontend* fe)
+{
+ return dtt200u_fe_init(fe);
+}
+
+static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 1500;
+ tune->step_size = 166667;
+ tune->max_drift = 166667 * 2;
+ return 0;
+}
+
+static int dtt200u_fe_set_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct dtt200u_fe_state *state = fe->demodulator_priv;
+ u16 freq = fep->frequency / 250000;
+ u8 bw,bwbuf[2] = { 0x03, 0 }, freqbuf[3] = { 0x02, 0, 0 };
+
+ switch (fep->u.ofdm.bandwidth) {
+ case BANDWIDTH_8_MHZ: bw = 8; break;
+ case BANDWIDTH_7_MHZ: bw = 7; break;
+ case BANDWIDTH_6_MHZ: bw = 6; break;
+ case BANDWIDTH_AUTO: return -EOPNOTSUPP;
+ default:
+ return -EINVAL;
+ }
+ deb_info("set_frontend\n");
+
+ bwbuf[1] = bw;
+ dibusb_write_usb(state->dib,bwbuf,2);
+
+ freqbuf[1] = freq & 0xff;
+ freqbuf[2] = (freq >> 8) & 0xff;
+ dibusb_write_usb(state->dib,freqbuf,3);
+
+ memcpy(&state->fep,fep,sizeof(struct dvb_frontend_parameters));
+
+ return 0;
+}
+
+static int dtt200u_fe_get_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct dtt200u_fe_state *state = fe->demodulator_priv;
+ memcpy(fep,&state->fep,sizeof(struct dvb_frontend_parameters));
+ return 0;
+}
+
+static void dtt200u_fe_release(struct dvb_frontend* fe)
+{
+ struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv;
+ kfree(state);
+}
+
+static int dtt200u_pid_control(struct dvb_frontend *fe,int index, int pid,int onoff)
+{
+ struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv;
+ u8 b_pid[4];
+ pid = onoff ? pid : 0;
+
+ b_pid[0] = 0x04;
+ b_pid[1] = index;
+ b_pid[2] = pid & 0xff;
+ b_pid[3] = (pid >> 8) & 0xff;
+
+ dibusb_write_usb(state->dib,b_pid,4);
+ return 0;
+}
+
+static int dtt200u_fifo_control(struct dvb_frontend *fe, int onoff)
+{
+ struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv;
+ u8 b_streaming[2] = { 0x08, onoff };
+ u8 b_rst_pid[1] = { 0x05 };
+
+ dibusb_write_usb(state->dib,b_streaming,2);
+
+ if (!onoff)
+ dibusb_write_usb(state->dib,b_rst_pid,1);
+ return 0;
+}
+
+static struct dvb_frontend_ops dtt200u_fe_ops;
+
+struct dvb_frontend* dtt200u_fe_attach(struct usb_dibusb *dib, struct dib_fe_xfer_ops *xfer_ops)
+{
+ struct dtt200u_fe_state* state = NULL;
+
+ /* allocate memory for the internal state */
+ state = (struct dtt200u_fe_state*) kmalloc(sizeof(struct dtt200u_fe_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+ memset(state,0,sizeof(struct dtt200u_fe_state));
+
+ deb_info("attaching frontend dtt200u\n");
+
+ state->dib = dib;
+
+ state->frontend.ops = &dtt200u_fe_ops;
+ state->frontend.demodulator_priv = state;
+
+ xfer_ops->fifo_ctrl = dtt200u_fifo_control;
+ xfer_ops->pid_ctrl = dtt200u_pid_control;
+
+ goto success;
+error:
+ return NULL;
+success:
+ return &state->frontend;
+}
+
+static struct dvb_frontend_ops dtt200u_fe_ops = {
+ .info = {
+ .name = "DTT200U (Yakumo/Typhoon/Hama) DVB-T",
+ .type = FE_OFDM,
+ .frequency_min = 44250000,
+ .frequency_max = 867250000,
+ .frequency_stepsize = 250000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_RECOVER |
+ FE_CAN_HIERARCHY_AUTO,
+ },
+
+ .release = dtt200u_fe_release,
+
+ .init = dtt200u_fe_init,
+ .sleep = dtt200u_fe_sleep,
+
+ .set_frontend = dtt200u_fe_set_frontend,
+ .get_frontend = dtt200u_fe_get_frontend,
+ .get_tune_settings = dtt200u_fe_get_tune_settings,
+
+ .read_status = dtt200u_fe_read_status,
+ .read_ber = dtt200u_fe_read_ber,
+ .read_signal_strength = dtt200u_fe_read_signal_strength,
+ .read_snr = dtt200u_fe_read_snr,
+ .read_ucblocks = dtt200u_fe_read_unc_blocks,
+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 20:04:56 +0000