diff options
Diffstat (limited to 'drivers/mfd/glamo/glamo-mci.c')
| -rw-r--r-- | drivers/mfd/glamo/glamo-mci.c | 1007 |
1 files changed, 1007 insertions, 0 deletions
diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c new file mode 100644 index 00000000000..7401e35c39a --- /dev/null +++ b/drivers/mfd/glamo/glamo-mci.c @@ -0,0 +1,1007 @@ +/* + * linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver + * + * Copyright (C) 2007 Openmoko, Inc, Andy Green <andy@openmoko.com> + * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de> + * Based on S3C MMC driver that was: + * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/crc7.h> +#include <linux/scatterlist.h> +#include <linux/io.h> +#include <linux/regulator/consumer.h> +#include <linux/mfd/glamo.h> + +#include "glamo-core.h" +#include "glamo-regs.h" + +struct glamo_mci_host { + struct glamo_mmc_platform_data *pdata; + struct platform_device *pdev; + struct glamo_core *core; + struct mmc_host *mmc; + struct resource *mmio_mem; + struct resource *data_mem; + void __iomem *mmio_base; + uint16_t __iomem *data_base; + + unsigned int irq; + + struct regulator *regulator; + struct mmc_request *mrq; + + unsigned int clk_rate; + + unsigned short vdd; + char power_mode; + + unsigned char request_counter; + + struct timer_list disable_timer; + + struct work_struct irq_work; + struct work_struct read_work; + + unsigned clk_enabled:1; +}; + +static void glamo_mci_send_request(struct mmc_host *mmc, + struct mmc_request *mrq); +static void glamo_mci_send_command(struct glamo_mci_host *host, + struct mmc_command *cmd); + +/* + * Max SD clock rate + * + * held at /(3 + 1) due to concerns of 100R recommended series resistor + * allows 16MHz @ 4-bit --> 8MBytes/sec raw + * + * you can override this on kernel commandline using + * + * glamo_mci.sd_max_clk=10000000 + * + * for example + */ + +static int sd_max_clk = 21000000; +module_param(sd_max_clk, int, 0644); + +/* + * Slow SD clock rate + * + * you can override this on kernel commandline using + * + * glamo_mci.sd_slow_ratio=8 + * + * for example + * + * platform callback is used to decide effective clock rate, if not + * defined then max is used, if defined and returns nonzero, rate is + * divided by this factor + */ + +static int sd_slow_ratio = 8; +module_param(sd_slow_ratio, int, 0644); + +/* + * Post-power SD clock rate + * + * you can override this on kernel commandline using + * + * glamo_mci.sd_post_power_clock=1000000 + * + * for example + * + * After changing power to card, clock is held at this rate until first bulk + * transfer completes + */ + +static int sd_post_power_clock = 1000000; +module_param(sd_post_power_clock, int, 0644); + + +static inline void glamo_reg_write(struct glamo_mci_host *glamo, + uint16_t reg, uint16_t val) +{ + writew(val, glamo->mmio_base + reg); +} + +static inline uint16_t glamo_reg_read(struct glamo_mci_host *glamo, + uint16_t reg) +{ + return readw(glamo->mmio_base + reg); +} + +static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo, + uint16_t reg, uint16_t mask, + uint16_t val) +{ + uint16_t tmp; + + val &= mask; + + tmp = glamo_reg_read(glamo, reg); + tmp &= ~mask; + tmp |= val; + glamo_reg_write(glamo, reg, tmp); +} + +static void glamo_mci_clock_disable(struct glamo_mci_host *host) +{ + if (host->clk_enabled) { + glamo_engine_suspend(host->core, GLAMO_ENGINE_MMC); + host->clk_enabled = 0; + } +} + +static void glamo_mci_clock_enable(struct glamo_mci_host *host) +{ + del_timer_sync(&host->disable_timer); + + if (!host->clk_enabled) { + glamo_engine_enable(host->core, GLAMO_ENGINE_MMC); + host->clk_enabled = 1; + } +} + +static void glamo_mci_disable_timer(unsigned long data) +{ + struct glamo_mci_host *host = (struct glamo_mci_host *)data; + glamo_mci_clock_disable(host); +} + + +static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data) +{ + struct scatterlist *sg; + uint16_t __iomem *from_ptr = host->data_base; + void *sg_pointer; + + dev_dbg(&host->pdev->dev, "pio_read():\n"); + for (sg = data->sg; sg; sg = sg_next(sg)) { + sg_pointer = page_address(sg_page(sg)) + sg->offset; + + + memcpy(sg_pointer, from_ptr, sg->length); + from_ptr += sg->length >> 1; + + data->bytes_xfered += sg->length; + } + + dev_dbg(&host->pdev->dev, "pio_read(): " + "complete (no more data).\n"); +} + +static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data) +{ + struct scatterlist *sg; + uint16_t __iomem *to_ptr = host->data_base; + void *sg_pointer; + + dev_dbg(&host->pdev->dev, "pio_write():\n"); + for (sg = data->sg; sg; sg = sg_next(sg)) { + sg_pointer = page_address(sg_page(sg)) + sg->offset; + + data->bytes_xfered += sg->length; + + memcpy(to_ptr, sg_pointer, sg->length); + to_ptr += sg->length >> 1; + } + + dev_dbg(&host->pdev->dev, "pio_write(): complete\n"); +} + +static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq) +{ + int real_rate = 0; + + if (freq) { + glamo_mci_clock_enable(host); + real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC, + freq); + } else { + glamo_mci_clock_disable(host); + } + + return real_rate; +} + +static void glamo_mci_request_done(struct glamo_mci_host *host, struct +mmc_request *mrq) +{ + mod_timer(&host->disable_timer, jiffies + HZ / 16); + mmc_request_done(host->mmc, mrq); +} + + +static void glamo_mci_irq_worker(struct work_struct *work) +{ + struct glamo_mci_host *host = container_of(work, struct glamo_mci_host, + irq_work); + struct mmc_command *cmd; + uint16_t status; + if (!host->mrq || !host->mrq->cmd) + return; + + cmd = host->mrq->cmd; + +#if 0 + if (cmd->data->flags & MMC_DATA_READ) + return; +#endif + + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status); + + /* we ignore a data timeout report if we are also told the data came */ + if (status & GLAMO_STAT1_MMC_RB_DRDY) + status &= ~GLAMO_STAT1_MMC_DTOUT; + + if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT)) + cmd->error = -ETIMEDOUT; + else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) + cmd->error = -EILSEQ; + + if (cmd->error) { + dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status); + goto done; + } + + /* issue STOP if we have been given one to use */ + if (host->mrq->stop) + glamo_mci_send_command(host, host->mrq->stop); + + if (cmd->data->flags & MMC_DATA_READ) + do_pio_read(host, cmd->data); + +done: + host->mrq = NULL; + glamo_mci_request_done(host, cmd->mrq); +} + +static void glamo_mci_read_worker(struct work_struct *work) +{ + struct glamo_mci_host *host = container_of(work, struct glamo_mci_host, + read_work); + struct mmc_command *cmd; + uint16_t status; + uint16_t blocks_ready; + size_t data_read = 0; + size_t data_ready; + struct scatterlist *sg; + uint16_t __iomem *from_ptr = host->data_base; + void *sg_pointer; + + + cmd = host->mrq->cmd; + sg = cmd->data->sg; + do { + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + + if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT)) + cmd->error = -ETIMEDOUT; + if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) + cmd->error = -EILSEQ; + if (cmd->error) { + dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", + status); + goto done; + } + + blocks_ready = glamo_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT); + data_ready = blocks_ready * cmd->data->blksz; + + if (data_ready == data_read) + yield(); + + while (sg && data_read + sg->length <= data_ready) { + sg_pointer = page_address(sg_page(sg)) + sg->offset; + memcpy(sg_pointer, from_ptr, sg->length); + from_ptr += sg->length >> 1; + + data_read += sg->length; + sg = sg_next(sg); + } + + } while (sg); + cmd->data->bytes_xfered = data_read; + + do { + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + } while (!(status & GLAMO_STAT1_MMC_IDLE)); + + if (host->mrq->stop) + glamo_mci_send_command(host, host->mrq->stop); + + do { + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + } while (!(status & GLAMO_STAT1_MMC_IDLE)); +done: + host->mrq = NULL; + glamo_mci_request_done(host, cmd->mrq); +} + +static irqreturn_t glamo_mci_irq(int irq, void *devid) +{ + struct glamo_mci_host *host = (struct glamo_mci_host *)devid; + schedule_work(&host->irq_work); + + return IRQ_HANDLED; +} + +static void glamo_mci_send_command(struct glamo_mci_host *host, + struct mmc_command *cmd) +{ + uint8_t u8a[6]; + uint16_t fire = 0; + unsigned int timeout = 1000000; + uint16_t *reg_resp = (uint16_t *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1); + uint16_t status; + int triggers_int = 1; + + /* if we can't do it, reject as busy */ + if (!(glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) & + GLAMO_STAT1_MMC_IDLE)) { + cmd->error = -EBUSY; + return; + } + + /* create an array in wire order for CRC computation */ + u8a[0] = 0x40 | (cmd->opcode & 0x3f); + u8a[1] = (uint8_t)(cmd->arg >> 24); + u8a[2] = (uint8_t)(cmd->arg >> 16); + u8a[3] = (uint8_t)(cmd->arg >> 8); + u8a[4] = (uint8_t)cmd->arg; + u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01; + + /* issue the wire-order array including CRC in register order */ + glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5])); + glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3])); + glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1])); + + /* command index toggle */ + fire |= (host->request_counter & 1) << 12; + + /* set type of command */ + switch (mmc_cmd_type(cmd)) { + case MMC_CMD_BC: + fire |= GLAMO_FIRE_MMC_CMDT_BNR; + break; + case MMC_CMD_BCR: + fire |= GLAMO_FIRE_MMC_CMDT_BR; + break; + case MMC_CMD_AC: + fire |= GLAMO_FIRE_MMC_CMDT_AND; + break; + case MMC_CMD_ADTC: + fire |= GLAMO_FIRE_MMC_CMDT_AD; + break; + } + /* + * if it expects a response, set the type expected + * + * R1, Length : 48bit, Normal response + * R1b, Length : 48bit, same R1, but added card busy status + * R2, Length : 136bit (really 128 bits with CRC snipped) + * R3, Length : 48bit (OCR register value) + * R4, Length : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card + * R5, Length : 48bit, IO_RW_DIRECTION, Reverse SDIO Card + * R6, Length : 48bit (RCA register) + * R7, Length : 48bit (interface condition, VHS(voltage supplied), + * check pattern, CRC7) + */ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_R1: /* same index as R6 and R7 */ + fire |= GLAMO_FIRE_MMC_RSPT_R1; + break; + case MMC_RSP_R1B: + fire |= GLAMO_FIRE_MMC_RSPT_R1b; + break; + case MMC_RSP_R2: + fire |= GLAMO_FIRE_MMC_RSPT_R2; + break; + case MMC_RSP_R3: + fire |= GLAMO_FIRE_MMC_RSPT_R3; + break; + /* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */ + } + /* + * From the command index, set up the command class in the host ctrllr + * + * missing guys present on chip but couldn't figure out how to use yet: + * 0x0 "stream read" + * 0x9 "cancel running command" + */ + switch (cmd->opcode) { + case MMC_READ_SINGLE_BLOCK: + fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */ + break; + case MMC_SWITCH: /* 64 byte payload */ + case SD_APP_SEND_SCR: + case MMC_READ_MULTIPLE_BLOCK: + /* we will get an interrupt off this */ + if (!cmd->mrq->stop) { + /* multiblock no stop */ + fire |= GLAMO_FIRE_MMC_CC_MBRNS; + } else { + /* multiblock with stop */ + fire |= GLAMO_FIRE_MMC_CC_MBRS; + } + break; + case MMC_WRITE_BLOCK: + fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */ + break; + case MMC_WRITE_MULTIPLE_BLOCK: + if (cmd->mrq->stop) { + /* multiblock with stop */ + fire |= GLAMO_FIRE_MMC_CC_MBWS; + } else { + /* multiblock NO stop-- 'RESERVED'? */ + fire |= GLAMO_FIRE_MMC_CC_MBWNS; + } + break; + case MMC_STOP_TRANSMISSION: + fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */ + triggers_int = 0; + break; + default: + fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */ + triggers_int = 0; + break; + } + + if (cmd->data) + host->mrq = cmd->mrq; + + /* always largest timeout */ + glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff); + + /* Generate interrupt on txfer */ + glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36, + 0x0800 | + GLAMO_BASIC_MMC_NO_CLK_RD_WAIT | + GLAMO_BASIC_MMC_EN_COMPL_INT | + GLAMO_BASIC_MMC_EN_DATA_PUPS | + GLAMO_BASIC_MMC_EN_CMD_PUP); + + /* send the command out on the wire */ + /* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */ + glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire); + + /* we are deselecting card? because it isn't going to ack then... */ + if ((cmd->opcode == 7) && (cmd->arg == 0)) + return; + + /* + * we must spin until response is ready or timed out + * -- we don't get interrupts unless there is a bulk rx + */ + do + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + while (((((status >> 15) & 1) != (host->request_counter & 1)) || + (!(status & (GLAMO_STAT1_MMC_RB_RRDY | + GLAMO_STAT1_MMC_RTOUT | + GLAMO_STAT1_MMC_DTOUT | + GLAMO_STAT1_MMC_BWERR | + GLAMO_STAT1_MMC_BRERR)))) && (timeout--)); + + if ((status & (GLAMO_STAT1_MMC_RTOUT | + GLAMO_STAT1_MMC_DTOUT)) || + (timeout == 0)) { + cmd->error = -ETIMEDOUT; + } else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) { + cmd->error = -EILSEQ; + } + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + cmd->resp[3] = readw(®_resp[0]) | + (readw(®_resp[1]) << 16); + cmd->resp[2] = readw(®_resp[2]) | + (readw(®_resp[3]) << 16); + cmd->resp[1] = readw(®_resp[4]) | + (readw(®_resp[5]) << 16); + cmd->resp[0] = readw(®_resp[6]) | + (readw(®_resp[7]) << 16); + } else { + cmd->resp[0] = (readw(®_resp[0]) >> 8) | + (readw(®_resp[1]) << 8) | + (readw(®_resp[2]) << 24); + } + } + +#if 0 + /* We'll only get an interrupt when all data has been transfered. + By starting to copy data when it's avaiable we can increase + throughput by up to 30%. */ + if (cmd->data && (cmd->data->flags & MMC_DATA_READ)) + schedule_work(&host->read_work); +#endif + +} + +static int glamo_mci_prepare_pio(struct glamo_mci_host *host, + struct mmc_data *data) +{ + /* set up the block info */ + glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz); + glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks); + + data->bytes_xfered = 0; + + /* if write, prep the write into the shared RAM before the command */ + if (data->flags & MMC_DATA_WRITE) + do_pio_write(host, data); + + dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n", + data->blksz, data->blocks); + return 0; +} + +static int glamo_mci_irq_poll(struct glamo_mci_host *host, + struct mmc_command *cmd) +{ + int timeout = 1000000; + uint16_t status; + /* + * if the glamo INT# line isn't wired (*cough* it can happen) + * I'm afraid we have to spin on the IRQ status bit and "be + * our own INT# line" + */ + /* + * we have faith we will get an "interrupt"... + * but something insane like suspend problems can mean + * we spin here forever, so we timeout after a LONG time + */ + do { + status = glamo_reg_read(host, GLAMO_REG_IRQ_STATUS); + } while ((--timeout) && !(status & GLAMO_IRQ_MMC)); + + if (timeout <= 0) { + if (cmd->data->error) + cmd->data->error = -ETIMEDOUT; + dev_err(&host->pdev->dev, "Payload timeout\n"); + return -ETIMEDOUT; + } + /* ack this interrupt source */ + writew(GLAMO_IRQ_MMC, host->core->base + + GLAMO_REG_IRQ_CLEAR); + + /* yay we are an interrupt controller! -- call the ISR + * it will stop clock to card + */ + glamo_mci_irq(host->irq, host); + + return 0; +} + +static void glamo_mci_send_request(struct mmc_host *mmc, + struct mmc_request *mrq) +{ + struct glamo_mci_host *host = mmc_priv(mmc); + struct mmc_command *cmd = mrq->cmd; + + glamo_mci_clock_enable(host); + host->request_counter++; + if (cmd->data) { + if (glamo_mci_prepare_pio(host, cmd->data)) { + cmd->error = -EIO; + cmd->data->error = -EIO; + goto done; + } + } + + dev_dbg(&host->pdev->dev, "cmd 0x%x, " + "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n", + cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop, + cmd->flags); + + glamo_mci_send_command(host, cmd); + + /* + * if we don't have bulk data to take care of, we're done + */ + if (!cmd->data || cmd->error) + goto done; + + + if (!host->core->irq_works) { + if (glamo_mci_irq_poll(host, mrq->cmd)) + goto done; + } + + /* + * Otherwise can can use the interrupt as async completion -- + * if there is read data coming, or we wait for write data to complete, + * exit without mmc_request_done() as the payload interrupt + * will service it + */ + dev_dbg(&host->pdev->dev, "Waiting for payload data\n"); + return; +done: + glamo_mci_request_done(host, mrq); +} + +static void glamo_mci_set_power_mode(struct glamo_mci_host *host, + unsigned char power_mode) +{ + int ret; + + if (power_mode == host->power_mode) + return; + + switch (power_mode) { + case MMC_POWER_UP: + if (host->power_mode == MMC_POWER_OFF) { + ret = regulator_enable(host->regulator); + if (ret) + dev_err(&host->pdev->dev, + "Failed to enable regulator: %d\n", + ret); + } + break; + case MMC_POWER_ON: + break; + case MMC_POWER_OFF: + default: + glamo_engine_disable(host->core, GLAMO_ENGINE_MMC); + + ret = regulator_disable(host->regulator); + if (ret) + dev_warn(&host->pdev->dev, + "Failed to disable regulator: %d\n", + ret); + break; + } + host->power_mode = power_mode; +} + +static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct glamo_mci_host *host = mmc_priv(mmc); + int bus_width = 0; + int rate; + int sd_drive; + int ret; + + /* Set power */ + glamo_mci_set_power_mode(host, ios->power_mode); + + if (host->vdd != ios->vdd) { + ret = mmc_regulator_set_ocr(host->regulator, ios->vdd); + if (ret) + dev_err(&host->pdev->dev, + "Failed to set regulator voltage: %d\n", ret); + else + host->vdd = ios->vdd; + } + rate = glamo_mci_set_card_clock(host, ios->clock); + + if ((ios->power_mode == MMC_POWER_ON) || + (ios->power_mode == MMC_POWER_UP)) { + dev_info(&host->pdev->dev, + "powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). " + "Bus width=%d\n", ios->vdd, + rate / 1000, 0, + ios->clock / 1000, (int)ios->bus_width); + } else { + dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n"); + } + + /* set bus width */ + if (ios->bus_width == MMC_BUS_WIDTH_4) + bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA; + + sd_drive = (rate * 4) / host->clk_rate; + if (sd_drive > 3) + sd_drive = 3; + + glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, + GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0, + bus_width | sd_drive << 6); +} + + +/* + * no physical write protect supported by us + */ +static int glamo_mci_get_ro(struct mmc_host *mmc) +{ + return 0; +} + +static struct mmc_host_ops glamo_mci_ops = { + .request = glamo_mci_send_request, + .set_ios = glamo_mci_set_ios, + .get_ro = glamo_mci_get_ro, +}; + +static int glamo_mci_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct glamo_mci_host *host; + struct glamo_core *core = dev_get_drvdata(pdev->dev.parent); + int ret; + + dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n"); + + mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_out; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdev = pdev; + if (core->pdata) + host->pdata = core->pdata->mmc_data; + host->power_mode = MMC_POWER_OFF; + host->clk_enabled = 0; + host->core = core; + host->irq = platform_get_irq(pdev, 0); + + INIT_WORK(&host->irq_work, glamo_mci_irq_worker); + INIT_WORK(&host->read_work, glamo_mci_read_worker); + + host->regulator = regulator_get(pdev->dev.parent, "SD_3V3"); + if (!host->regulator) { + dev_err(&pdev->dev, "Cannot proceed without regulator.\n"); + ret = -ENODEV; + goto probe_free_host; + } + + host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!host->mmio_mem) { + dev_err(&pdev->dev, + "failed to get io memory region resouce.\n"); + ret = -ENOENT; + goto probe_regulator_put; + } + + host->mmio_mem = request_mem_region(host->mmio_mem->start, + resource_size(host->mmio_mem), + pdev->name); + + if (!host->mmio_mem) { + dev_err(&pdev->dev, "failed to request io memory region.\n"); + ret = -ENOENT; + goto probe_regulator_put; + } + + host->mmio_base = ioremap(host->mmio_mem->start, + resource_size(host->mmio_mem)); + if (!host->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); + ret = -EINVAL; + goto probe_free_mem_region_mmio; + } + + + /* Get ahold of our data buffer we use for data in and out on MMC */ + host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!host->data_mem) { + dev_err(&pdev->dev, + "failed to get io memory region resource.\n"); + ret = -ENOENT; + goto probe_iounmap_mmio; + } + + host->data_mem = request_mem_region(host->data_mem->start, + resource_size(host->data_mem), + pdev->name); + + if (!host->data_mem) { + dev_err(&pdev->dev, "failed to request io memory region.\n"); + ret = -ENOENT; + goto probe_iounmap_mmio; + } + host->data_base = ioremap(host->data_mem->start, + resource_size(host->data_mem)); + + if (host->data_base == 0) { + dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); + ret = -EINVAL; + goto probe_free_mem_region_data; + } + + ret = request_irq(host->irq, glamo_mci_irq, IRQF_SHARED, + pdev->name, host); + if (ret) { + dev_err(&pdev->dev, "failed to register irq.\n"); + goto probe_iounmap_data; + } + + + host->vdd = 0; + host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1); + + /* explain our host controller capabilities */ + mmc->ops = &glamo_mci_ops; + mmc->ocr_avail = mmc_regulator_get_ocrmask(host->regulator); + mmc->caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED; + mmc->f_min = host->clk_rate / 256; + mmc->f_max = sd_max_clk; + + mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */ + mmc->max_blk_size = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */ + mmc->max_req_size = resource_size(host->data_mem); + mmc->max_seg_size = mmc->max_req_size; + mmc->max_phys_segs = 128; + mmc->max_hw_segs = 128; + + if (mmc->ocr_avail < 0) { + dev_warn(&pdev->dev, + "Failed to get ocr list for regulator: %d.\n", + mmc->ocr_avail); + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + } + + platform_set_drvdata(pdev, mmc); + + glamo_engine_enable(host->core, GLAMO_ENGINE_MMC); + glamo_engine_reset(host->core, GLAMO_ENGINE_MMC); + + glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1, + (uint16_t)(host->data_mem->start)); + glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2, + (uint16_t)(host->data_mem->start >> 16)); + + glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1, + (uint16_t)(host->data_mem->start)); + glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2, + (uint16_t)(host->data_mem->start >> 16)); + + setup_timer(&host->disable_timer, glamo_mci_disable_timer, + (unsigned long)host); + + ret = mmc_add_host(mmc); + if (ret) { + dev_err(&pdev->dev, "failed to add mmc host.\n"); + goto probe_freeirq; + } + + return 0; + +probe_freeirq: + free_irq(host->irq, host); +probe_iounmap_data: + iounmap(host->data_base); +probe_free_mem_region_data: + release_mem_region(host->data_mem->start, + resource_size(host->data_mem)); +probe_iounmap_mmio: + iounmap(host->mmio_base); +probe_free_mem_region_mmio: + release_mem_region(host->mmio_mem->start, + resource_size(host->mmio_mem)); +probe_regulator_put: + regulator_put(host->regulator); +probe_free_host: + mmc_free_host(mmc); +probe_out: + return ret; +} + +static int glamo_mci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct glamo_mci_host *host = mmc_priv(mmc); + + free_irq(host->irq, host); + + mmc_remove_host(mmc); + iounmap(host->mmio_base); + iounmap(host->data_base); + release_mem_region(host->mmio_mem->start, + resource_size(host->mmio_mem)); + release_mem_region(host->data_mem->start, + resource_size(host->data_mem)); + + regulator_put(host->regulator); + + mmc_free_host(mmc); + + glamo_engine_disable(host->core, GLAMO_ENGINE_MMC); + return 0; +} + + +#ifdef CONFIG_PM + +static int glamo_mci_suspend(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct glamo_mci_host *host = mmc_priv(mmc); + int ret; + + cancel_work_sync(&host->irq_work); + + ret = mmc_suspend_host(mmc, PMSG_SUSPEND); + + glamo_engine_disable(host->core, GLAMO_ENGINE_MMC); + + return ret; +} + +static int glamo_mci_resume(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct glamo_mci_host *host = mmc_priv(mmc); + int ret; + + glamo_engine_enable(host->core, GLAMO_ENGINE_MMC); + glamo_engine_reset(host->core, GLAMO_ENGINE_MMC); + + glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1, + (uint16_t)(host->data_mem->start)); + glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2, + (uint16_t)(host->data_mem->start >> 16)); + + glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1, + (uint16_t)(host->data_mem->start)); + glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2, + (uint16_t)(host->data_mem->start >> 16)); + mdelay(5); + + ret = mmc_resume_host(host->mmc); +/* glamo_mci_clock_disable(host);*/ + + return 0; +} + +static struct dev_pm_ops glamo_mci_pm_ops = { + .suspend = glamo_mci_suspend, + .resume = glamo_mci_resume, + .freeze = glamo_mci_suspend, + .thaw = glamo_mci_resume, +}; +#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops) + +#else /* CONFIG_PM */ +#define GLAMO_MCI_PM_OPS NULL +#endif /* CONFIG_PM */ + + +static struct platform_driver glamo_mci_driver = { + .probe = glamo_mci_probe, + .remove = glamo_mci_remove, + .driver = { + .name = "glamo-mci", + .owner = THIS_MODULE, + .pm = GLAMO_MCI_PM_OPS, + }, +}; + +static int __init glamo_mci_init(void) +{ + platform_driver_register(&glamo_mci_driver); + return 0; +} +module_init(glamo_mci_init); + +static void __exit glamo_mci_exit(void) +{ + platform_driver_unregister(&glamo_mci_driver); +} +module_exit(glamo_mci_exit); + +MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andy Green <andy@openmoko.com>"); |