diff options
Diffstat (limited to 'drivers/mtd/nand/au1550nd.c')
| -rw-r--r-- | drivers/mtd/nand/au1550nd.c | 56 |
1 files changed, 26 insertions, 30 deletions
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 29dde7dcafa..31228334da1 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -40,6 +40,7 @@ static struct mtd_info *au1550_mtd = NULL; static void __iomem *p_nand; static int nand_width = 1; /* default x8 */ +static void (*au1550_write_byte)(struct mtd_info *, u_char); /* * Define partitions for flash device @@ -129,21 +130,6 @@ static u16 au_read_word(struct mtd_info *mtd) } /** - * au_write_word - write one word to the chip - * @mtd: MTD device structure - * @word: data word to write - * - * write function for 16bit buswith without - * endianess conversion - */ -static void au_write_word(struct mtd_info *mtd, u16 word) -{ - struct nand_chip *this = mtd->priv; - writew(word, this->IO_ADDR_W); - au_sync(); -} - -/** * au_write_buf - write buffer to chip * @mtd: MTD device structure * @buf: data buffer @@ -269,6 +255,18 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) return 0; } +/* Select the chip by setting nCE to low */ +#define NAND_CTL_SETNCE 1 +/* Deselect the chip by setting nCE to high */ +#define NAND_CTL_CLRNCE 2 +/* Select the command latch by setting CLE to high */ +#define NAND_CTL_SETCLE 3 +/* Deselect the command latch by setting CLE to low */ +#define NAND_CTL_CLRCLE 4 +/* Select the address latch by setting ALE to high */ +#define NAND_CTL_SETALE 5 +/* Deselect the address latch by setting ALE to low */ +#define NAND_CTL_CLRALE 6 static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) { @@ -349,7 +347,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i ulong flags; /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); + au1550_hwcontrol(mtd, NAND_CTL_SETCLE); /* * Write out the command to the device. */ @@ -367,25 +365,25 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i column -= 256; readcmd = NAND_CMD_READ1; } - this->write_byte(mtd, readcmd); + au1550_write_byte(mtd, readcmd); } - this->write_byte(mtd, command); + au1550_write_byte(mtd, command); /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + au1550_hwcontrol(mtd, NAND_CTL_CLRCLE); if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); + au1550_hwcontrol(mtd, NAND_CTL_SETALE); /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ if (this->options & NAND_BUSWIDTH_16) column >>= 1; - this->write_byte(mtd, column); + au1550_write_byte(mtd, column); } if (page_addr != -1) { - this->write_byte(mtd, (u8)(page_addr & 0xff)); + au1550_write_byte(mtd, (u8)(page_addr & 0xff)); if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || @@ -400,17 +398,17 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i */ ce_override = 1; local_irq_save(flags); - this->hwcontrol(mtd, NAND_CTL_SETNCE); + au1550_hwcontrol(mtd, NAND_CTL_SETNCE); } - this->write_byte(mtd, (u8)(page_addr >> 8)); + au1550_write_byte(mtd, (u8)(page_addr >> 8)); /* One more address cycle for devices > 32MiB */ if (this->chipsize > (32 << 20)) - this->write_byte(mtd, (u8)((page_addr >> 16) & 0x0f)); + au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f)); } /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + au1550_hwcontrol(mtd, NAND_CTL_CLRALE); } /* @@ -443,7 +441,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i udelay(1); /* Release -CE and re-enable interrupts. */ - this->hwcontrol(mtd, NAND_CTL_CLRNCE); + au1550_hwcontrol(mtd, NAND_CTL_CLRNCE); local_irq_restore(flags); return; } @@ -571,7 +569,6 @@ static int __init au1xxx_nand_init(void) nand_width = au_readl(MEM_STCFG3) & (1 << 22); /* Set address of hardware control function */ - this->hwcontrol = au1550_hwcontrol; this->dev_ready = au1550_device_ready; this->select_chip = au1550_select_chip; this->cmdfunc = au1550_command; @@ -586,8 +583,7 @@ static int __init au1xxx_nand_init(void) this->options |= NAND_BUSWIDTH_16; this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte; - this->write_byte = (!nand_width) ? au_write_byte16 : au_write_byte; - this->write_word = au_write_word; + au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte; this->read_word = au_read_word; this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf; this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf; |