aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig28
-rw-r--r--drivers/mtd/nand/Makefile3
-rw-r--r--drivers/mtd/nand/atmel_nand.c (renamed from drivers/mtd/nand/at91_nand.c)278
-rw-r--r--drivers/mtd/nand/atmel_nand_ecc.h36
-rw-r--r--drivers/mtd/nand/au1550nd.c4
-rw-r--r--drivers/mtd/nand/autcpu12.c2
-rw-r--r--drivers/mtd/nand/cafe_nand.c6
-rw-r--r--drivers/mtd/nand/diskonchip.c4
-rw-r--r--drivers/mtd/nand/edb7312.c2
-rw-r--r--drivers/mtd/nand/excite_nandflash.c2
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c63
-rw-r--r--drivers/mtd/nand/h1910.c2
-rw-r--r--drivers/mtd/nand/nand_base.c87
-rw-r--r--drivers/mtd/nand/nand_bbt.c2
-rw-r--r--drivers/mtd/nand/nand_ecc.c2
-rw-r--r--drivers/mtd/nand/nand_ids.c2
-rw-r--r--drivers/mtd/nand/nandsim.c41
-rw-r--r--drivers/mtd/nand/ppchameleonevb.c2
-rw-r--r--drivers/mtd/nand/rtc_from4.c2
-rw-r--r--drivers/mtd/nand/s3c2410.c168
-rw-r--r--drivers/mtd/nand/sharpsl.c2
-rw-r--r--drivers/mtd/nand/spia.c2
-rw-r--r--drivers/mtd/nand/toto.c2
-rw-r--r--drivers/mtd/nand/ts7250.c2
24 files changed, 512 insertions, 232 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5076faf9ca6..71406e51785 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,4 @@
# drivers/mtd/nand/Kconfig
-# $Id: Kconfig,v 1.35 2005/11/07 11:14:30 gleixner Exp $
menuconfig MTD_NAND
tristate "NAND Device Support"
@@ -272,22 +271,23 @@ config MTD_NAND_CS553X
If you say "m", the module will be called "cs553x_nand.ko".
-config MTD_NAND_AT91
- bool "Support for NAND Flash / SmartMedia on AT91"
- depends on ARCH_AT91
+config MTD_NAND_ATMEL
+ tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+ depends on ARCH_AT91 || AVR32
help
Enables support for NAND Flash / Smart Media Card interface
- on Atmel AT91 processors.
+ on Atmel AT91 and AVR32 processors.
choice
- prompt "ECC management for NAND Flash / SmartMedia on AT91"
- depends on MTD_NAND_AT91
+ prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
+ depends on MTD_NAND_ATMEL
-config MTD_NAND_AT91_ECC_HW
+config MTD_NAND_ATMEL_ECC_HW
bool "Hardware ECC"
- depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
+ depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
help
- Uses hardware ECC provided by the at91sam9260/at91sam9263 chip
- instead of software ECC.
+ Use hardware ECC instead of software ECC when the chip
+ supports it.
+
The hardware ECC controller is capable of single bit error
correction and 2-bit random detection per page.
@@ -297,16 +297,16 @@ config MTD_NAND_AT91_ECC_HW
If unsure, say Y
-config MTD_NAND_AT91_ECC_SOFT
+config MTD_NAND_ATMEL_ECC_SOFT
bool "Software ECC"
help
- Uses software ECC.
+ Use software ECC.
NB : hardware and software ECC schemes are incompatible.
If you switch from one to another, you'll have to erase your
mtd partition.
-config MTD_NAND_AT91_ECC_NONE
+config MTD_NAND_ATMEL_ECC_NONE
bool "No ECC (testing only, DANGEROUS)"
depends on DEBUG_KERNEL
help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a6e74a46992..d772581de57 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,7 +1,6 @@
#
# linux/drivers/nand/Makefile
#
-# $Id: Makefile.common,v 1.15 2004/11/26 12:28:22 dedekind Exp $
obj-$(CONFIG_MTD_NAND) += nand.o nand_ecc.o
obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
@@ -24,7 +23,7 @@ obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
-obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
+obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/atmel_nand.c
index 0adb287027a..99aec46e214 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1,6 +1,4 @@
/*
- * drivers/mtd/nand/at91_nand.c
- *
* Copyright (C) 2003 Rick Bronson
*
* Derived from drivers/mtd/nand/autcpu12.c
@@ -31,20 +29,19 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
-#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
#define hard_ecc 1
#else
#define hard_ecc 0
#endif
-#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
#define no_ecc 1
#else
#define no_ecc 0
@@ -52,18 +49,18 @@
/* Register access macros */
#define ecc_readl(add, reg) \
- __raw_readl(add + AT91_ECC_##reg)
+ __raw_readl(add + ATMEL_ECC_##reg)
#define ecc_writel(add, reg, value) \
- __raw_writel((value), add + AT91_ECC_##reg)
+ __raw_writel((value), add + ATMEL_ECC_##reg)
-#include <asm/arch/at91_ecc.h> /* AT91SAM9260/3 ECC registers */
+#include "atmel_nand_ecc.h" /* Hardware ECC registers */
/* oob layout for large page size
* bad block info is on bytes 0 and 1
* the bytes have to be consecutives to avoid
* several NAND_CMD_RNDOUT during read
*/
-static struct nand_ecclayout at91_oobinfo_large = {
+static struct nand_ecclayout atmel_oobinfo_large = {
.eccbytes = 4,
.eccpos = {60, 61, 62, 63},
.oobfree = {
@@ -76,7 +73,7 @@ static struct nand_ecclayout at91_oobinfo_large = {
* the bytes have to be consecutives to avoid
* several NAND_CMD_RNDOUT during read
*/
-static struct nand_ecclayout at91_oobinfo_small = {
+static struct nand_ecclayout atmel_oobinfo_small = {
.eccbytes = 4,
.eccpos = {0, 1, 2, 3},
.oobfree = {
@@ -84,11 +81,11 @@ static struct nand_ecclayout at91_oobinfo_small = {
},
};
-struct at91_nand_host {
+struct atmel_nand_host {
struct nand_chip nand_chip;
struct mtd_info mtd;
void __iomem *io_base;
- struct at91_nand_data *board;
+ struct atmel_nand_data *board;
struct device *dev;
void __iomem *ecc;
};
@@ -96,34 +93,34 @@ struct at91_nand_host {
/*
* Enable NAND.
*/
-static void at91_nand_enable(struct at91_nand_host *host)
+static void atmel_nand_enable(struct atmel_nand_host *host)
{
if (host->board->enable_pin)
- at91_set_gpio_value(host->board->enable_pin, 0);
+ gpio_set_value(host->board->enable_pin, 0);
}
/*
* Disable NAND.
*/
-static void at91_nand_disable(struct at91_nand_host *host)
+static void atmel_nand_disable(struct atmel_nand_host *host)
{
if (host->board->enable_pin)
- at91_set_gpio_value(host->board->enable_pin, 1);
+ gpio_set_value(host->board->enable_pin, 1);
}
/*
* Hardware specific access to control-lines
*/
-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *nand_chip = mtd->priv;
- struct at91_nand_host *host = nand_chip->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_NCE)
- at91_nand_enable(host);
+ atmel_nand_enable(host);
else
- at91_nand_disable(host);
+ atmel_nand_disable(host);
}
if (cmd == NAND_CMD_NONE)
return;
@@ -137,18 +134,49 @@ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
/*
* Read the Device Ready pin.
*/
-static int at91_nand_device_ready(struct mtd_info *mtd)
+static int atmel_nand_device_ready(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd->priv;
- struct at91_nand_host *host = nand_chip->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
- return at91_get_gpio_value(host->board->rdy_pin);
+ return gpio_get_value(host->board->rdy_pin);
+}
+
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
}
/*
* write oob for small pages
*/
-static int at91_nand_write_oob_512(struct mtd_info *mtd,
+static int atmel_nand_write_oob_512(struct mtd_info *mtd,
struct nand_chip *chip, int page)
{
int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
@@ -176,7 +204,7 @@ static int at91_nand_write_oob_512(struct mtd_info *mtd,
/*
* read oob for small pages
*/
-static int at91_nand_read_oob_512(struct mtd_info *mtd,
+static int atmel_nand_read_oob_512(struct mtd_info *mtd,
struct nand_chip *chip, int page, int sndcmd)
{
if (sndcmd) {
@@ -196,11 +224,11 @@ static int at91_nand_read_oob_512(struct mtd_info *mtd,
* dat: raw data (unused)
* ecc_code: buffer for ECC
*/
-static int at91_nand_calculate(struct mtd_info *mtd,
+static int atmel_nand_calculate(struct mtd_info *mtd,
const u_char *dat, unsigned char *ecc_code)
{
struct nand_chip *nand_chip = mtd->priv;
- struct at91_nand_host *host = nand_chip->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
unsigned int ecc_value;
@@ -211,7 +239,7 @@ static int at91_nand_calculate(struct mtd_info *mtd,
ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
/* get the last 2 ECC bytes */
- ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
+ ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
ecc_code[eccpos[2]] = ecc_value & 0xFF;
ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
@@ -226,7 +254,7 @@ static int at91_nand_calculate(struct mtd_info *mtd,
* chip: nand chip info structure
* buf: buffer to store read data
*/
-static int at91_nand_read_page(struct mtd_info *mtd,
+static int atmel_nand_read_page(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf)
{
int eccsize = chip->ecc.size;
@@ -237,6 +265,19 @@ static int at91_nand_read_page(struct mtd_info *mtd,
uint8_t *ecc_pos;
int stat;
+ /*
+ * Errata: ALE is incorrectly wired up to the ECC controller
+ * on the AP7000, so it will include the address cycles in the
+ * ECC calculation.
+ *
+ * Workaround: Reset the parity registers before reading the
+ * actual data.
+ */
+ if (cpu_is_at32ap7000()) {
+ struct atmel_nand_host *host = chip->priv;
+ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+ }
+
/* read the page */
chip->read_buf(mtd, p, eccsize);
@@ -285,11 +326,11 @@ static int at91_nand_read_page(struct mtd_info *mtd,
*
* Detect and correct a 1 bit error for a page
*/
-static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *isnull)
{
struct nand_chip *nand_chip = mtd->priv;
- struct at91_nand_host *host = nand_chip->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
unsigned int ecc_status;
unsigned int ecc_word, ecc_bit;
@@ -297,43 +338,43 @@ static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
ecc_status = ecc_readl(host->ecc, SR);
/* if there's no error */
- if (likely(!(ecc_status & AT91_ECC_RECERR)))
+ if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
return 0;
/* get error bit offset (4 bits) */
- ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
+ ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
/* get word address (12 bits) */
- ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
+ ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
ecc_word >>= 4;
/* if there are multiple errors */
- if (ecc_status & AT91_ECC_MULERR) {
+ if (ecc_status & ATMEL_ECC_MULERR) {
/* check if it is a freshly erased block
* (filled with 0xff) */
- if ((ecc_bit == AT91_ECC_BITADDR)
- && (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
+ if ((ecc_bit == ATMEL_ECC_BITADDR)
+ && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
/* the block has just been erased, return OK */
return 0;
}
/* it doesn't seems to be a freshly
* erased block.
* We can't correct so many errors */
- dev_dbg(host->dev, "at91_nand : multiple errors detected."
+ dev_dbg(host->dev, "atmel_nand : multiple errors detected."
" Unable to correct.\n");
return -EIO;
}
/* if there's a single bit error : we can correct it */
- if (ecc_status & AT91_ECC_ECCERR) {
+ if (ecc_status & ATMEL_ECC_ECCERR) {
/* there's nothing much to do here.
* the bit error is on the ECC itself.
*/
- dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
+ dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
" Nothing to correct\n");
return 0;
}
- dev_dbg(host->dev, "at91_nand : one bit error on data."
+ dev_dbg(host->dev, "atmel_nand : one bit error on data."
" (word offset in the page :"
" 0x%x bit offset : 0x%x)\n",
ecc_word, ecc_bit);
@@ -345,14 +386,21 @@ static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
/* 8 bits words */
dat[ecc_word] ^= (1 << ecc_bit);
}
- dev_dbg(host->dev, "at91_nand : error corrected\n");
+ dev_dbg(host->dev, "atmel_nand : error corrected\n");
return 1;
}
/*
- * Enable HW ECC : unsused
+ * Enable HW ECC : unused on most chips
*/
-static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+ if (cpu_is_at32ap7000()) {
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+ }
+}
#ifdef CONFIG_MTD_PARTITIONS
static const char *part_probes[] = { "cmdlinepart", NULL };
@@ -361,9 +409,9 @@ static const char *part_probes[] = { "cmdlinepart", NULL };
/*
* Probe for the NAND device.
*/
-static int __init at91_nand_probe(struct platform_device *pdev)
+static int __init atmel_nand_probe(struct platform_device *pdev)
{
- struct at91_nand_host *host;
+ struct atmel_nand_host *host;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
struct resource *regs;
@@ -375,24 +423,24 @@ static int __init at91_nand_probe(struct platform_device *pdev)
int num_partitions = 0;
#endif
- /* Allocate memory for the device structure (and zero it) */
- host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
- if (!host) {
- printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
- return -ENOMEM;
- }
-
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
- printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
+ printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
return -ENXIO;
}
+ /* Allocate memory for the device structure (and zero it) */
+ host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
+ if (!host) {
+ printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
+ return -ENOMEM;
+ }
+
host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
if (host->io_base == NULL) {
- printk(KERN_ERR "at91_nand: ioremap failed\n");
- kfree(host);
- return -EIO;
+ printk(KERN_ERR "atmel_nand: ioremap failed\n");
+ res = -EIO;
+ goto err_nand_ioremap;
}
mtd = &host->mtd;
@@ -407,14 +455,14 @@ static int __init at91_nand_probe(struct platform_device *pdev)
/* Set address of NAND IO lines */
nand_chip->IO_ADDR_R = host->io_base;
nand_chip->IO_ADDR_W = host->io_base;
- nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
+ nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
if (host->board->rdy_pin)
- nand_chip->dev_ready = at91_nand_device_ready;
+ nand_chip->dev_ready = atmel_nand_device_ready;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!regs && hard_ecc) {
- printk(KERN_ERR "at91_nand: can't get I/O resource "
+ printk(KERN_ERR "atmel_nand: can't get I/O resource "
"regs\nFalling back on software ECC\n");
}
@@ -424,15 +472,15 @@ static int __init at91_nand_probe(struct platform_device *pdev)
if (hard_ecc && regs) {
host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
if (host->ecc == NULL) {
- printk(KERN_ERR "at91_nand: ioremap failed\n");
+ printk(KERN_ERR "atmel_nand: ioremap failed\n");
res = -EIO;
goto err_ecc_ioremap;
}
nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
- nand_chip->ecc.calculate = at91_nand_calculate;
- nand_chip->ecc.correct = at91_nand_correct;
- nand_chip->ecc.hwctl = at91_nand_hwctl;
- nand_chip->ecc.read_page = at91_nand_read_page;
+ nand_chip->ecc.calculate = atmel_nand_calculate;
+ nand_chip->ecc.correct = atmel_nand_correct;
+ nand_chip->ecc.hwctl = atmel_nand_hwctl;
+ nand_chip->ecc.read_page = atmel_nand_read_page;
nand_chip->ecc.bytes = 4;
nand_chip->ecc.prepad = 0;
nand_chip->ecc.postpad = 0;
@@ -440,24 +488,30 @@ static int __init at91_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 20; /* 20us command delay time */
- if (host->board->bus_width_16) /* 16-bit bus width */
+ if (host->board->bus_width_16) { /* 16-bit bus width */
nand_chip->options |= NAND_BUSWIDTH_16;
+ nand_chip->read_buf = atmel_read_buf16;
+ nand_chip->write_buf = atmel_write_buf16;
+ } else {
+ nand_chip->read_buf = atmel_read_buf;
+ nand_chip->write_buf = atmel_write_buf;
+ }
platform_set_drvdata(pdev, host);
- at91_nand_enable(host);
+ atmel_nand_enable(host);
if (host->board->det_pin) {
- if (at91_get_gpio_value(host->board->det_pin)) {
- printk ("No SmartMedia card inserted.\n");
+ if (gpio_get_value(host->board->det_pin)) {
+ printk("No SmartMedia card inserted.\n");
res = ENXIO;
- goto out;
+ goto err_no_card;
}
}
/* first scan to find the device and get the page size */
if (nand_scan_ident(mtd, 1)) {
res = -ENXIO;
- goto out;
+ goto err_scan_ident;
}
if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
@@ -467,22 +521,22 @@ static int __init at91_nand_probe(struct platform_device *pdev)
/* set ECC page size and oob layout */
switch (mtd->writesize) {
case 512:
- nand_chip->ecc.layout = &at91_oobinfo_small;
- nand_chip->ecc.read_oob = at91_nand_read_oob_512;
- nand_chip->ecc.write_oob = at91_nand_write_oob_512;
- ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
+ nand_chip->ecc.layout = &atmel_oobinfo_small;
+ nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
+ nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
break;
case 1024:
- nand_chip->ecc.layout = &at91_oobinfo_large;
- ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
break;
case 2048:
- nand_chip->ecc.layout = &at91_oobinfo_large;
- ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
break;
case 4096:
- nand_chip->ecc.layout = &at91_oobinfo_large;
- ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
break;
default:
/* page size not handled by HW ECC */
@@ -502,12 +556,12 @@ static int __init at91_nand_probe(struct platform_device *pdev)
/* second phase scan */
if (nand_scan_tail(mtd)) {
res = -ENXIO;
- goto out;
+ goto err_scan_tail;
}
#ifdef CONFIG_MTD_PARTITIONS
#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd->name = "at91_nand";
+ mtd->name = "atmel_nand";
num_partitions = parse_mtd_partitions(mtd, part_probes,
&partitions, 0);
#endif
@@ -516,9 +570,9 @@ static int __init at91_nand_probe(struct platform_device *pdev)
&num_partitions);
if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+ printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
res = ENXIO;
- goto release;
+ goto err_no_partitions;
}
res = add_mtd_partitions(mtd, partitions, num_partitions);
@@ -530,17 +584,19 @@ static int __init at91_nand_probe(struct platform_device *pdev)
return res;
#ifdef CONFIG_MTD_PARTITIONS
-release:
+err_no_partitions:
#endif
nand_release(mtd);
-
-out:
- iounmap(host->ecc);
-
-err_ecc_ioremap:
- at91_nand_disable(host);
+err_scan_tail:
+err_scan_ident:
+err_no_card:
+ atmel_nand_disable(host);
platform_set_drvdata(pdev, NULL);
+ if (host->ecc)
+ iounmap(host->ecc);
+err_ecc_ioremap:
iounmap(host->io_base);
+err_nand_ioremap:
kfree(host);
return res;
}
@@ -548,47 +604,47 @@ err_ecc_ioremap:
/*
* Remove a NAND device.
*/
-static int __devexit at91_nand_remove(struct platform_device *pdev)
+static int __exit atmel_nand_remove(struct platform_device *pdev)
{
- struct at91_nand_host *host = platform_get_drvdata(pdev);
+ struct atmel_nand_host *host = platform_get_drvdata(pdev);
struct mtd_info *mtd = &host->mtd;
nand_release(mtd);
- at91_nand_disable(host);
+ atmel_nand_disable(host);
+ if (host->ecc)
+ iounmap(host->ecc);
iounmap(host->io_base);
- iounmap(host->ecc);
kfree(host);
return 0;
}
-static struct platform_driver at91_nand_driver = {
- .probe = at91_nand_probe,
- .remove = at91_nand_remove,
+static struct platform_driver atmel_nand_driver = {
+ .remove = __exit_p(atmel_nand_remove),
.driver = {
- .name = "at91_nand",
+ .name = "atmel_nand",
.owner = THIS_MODULE,
},
};
-static int __init at91_nand_init(void)
+static int __init atmel_nand_init(void)
{
- return platform_driver_register(&at91_nand_driver);
+ return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
}
-static void __exit at91_nand_exit(void)
+static void __exit atmel_nand_exit(void)
{
- platform_driver_unregister(&at91_nand_driver);
+ platform_driver_unregister(&atmel_nand_driver);
}
-module_init(at91_nand_init);
-module_exit(at91_nand_exit);
+module_init(atmel_nand_init);
+module_exit(atmel_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9");
-MODULE_ALIAS("platform:at91_nand");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
+MODULE_ALIAS("platform:atmel_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 00000000000..1ee7f993db1
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define ATMEL_ECC_CR 0x00 /* Control register */
+#define ATMEL_ECC_RST (1 << 0) /* Reset parity */
+
+#define ATMEL_ECC_MR 0x04 /* Mode register */
+#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */
+#define ATMEL_ECC_PAGESIZE_528 (0)
+#define ATMEL_ECC_PAGESIZE_1056 (1)
+#define ATMEL_ECC_PAGESIZE_2112 (2)
+#define ATMEL_ECC_PAGESIZE_4224 (3)
+
+#define ATMEL_ECC_SR 0x08 /* Status register */
+#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */
+#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
+#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */
+
+#define ATMEL_ECC_PR 0x0c /* Parity register */
+#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */
+#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
+#define ATMEL_ECC_NPR 0x10 /* NParity register */
+#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
+
+#endif
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 09e421a9689..761946ea45b 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -3,8 +3,6 @@
*
* Copyright (C) 2004 Embedded Edge, LLC
*
- * $Id: au1550nd.c,v 1.13 2005/11/07 11:14:30 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -604,8 +602,6 @@ module_init(au1xxx_nand_init);
*/
static void __exit au1550_cleanup(void)
{
- struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
-
/* Release resources, unregister device */
nand_release(au1550_mtd);
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index dd38011ee0b..553dd7e9b41 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -6,8 +6,6 @@
* Derived from drivers/mtd/spia.c
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
*
- * $Id: autcpu12.c,v 1.23 2005/11/07 11:14:30 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index da6ceaa80ba..95345d05157 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -626,10 +626,12 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
{
struct mtd_info *mtd;
struct cafe_priv *cafe;
- struct mtd_partition *parts;
uint32_t ctrl;
- int nr_parts;
int err = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+ struct mtd_partition *parts;
+ int nr_parts;
+#endif
/* Very old versions shared the same PCI ident for all three
functions on the chip. Verify the class too... */
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 0e72153b329..765d4f0f7c8 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -15,8 +15,6 @@
* converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
*
* Interface to generic NAND code for M-Systems DiskOnChip devices
- *
- * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $
*/
#include <linux/kernel.h>
@@ -54,8 +52,6 @@ static unsigned long __initdata doc_locations[] = {
0xe0000, 0xe2000, 0xe4000, 0xe6000,
0xe8000, 0xea000, 0xec000, 0xee000,
#endif /* CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
- 0xe4000000,
#else
#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index ba67bbec20d..387e4352903 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -6,8 +6,6 @@
* Derived from drivers/mtd/nand/autcpu12.c
* Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
*
- * $Id: edb7312.c,v 1.12 2005/11/07 11:14:30 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
index bed87290dec..ced14b5294d 100644
--- a/drivers/mtd/nand/excite_nandflash.c
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -209,7 +209,7 @@ static int __init excite_nand_probe(struct device *dev)
if (likely(!scan_res)) {
DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
add_mtd_partitions(&drvdata->board_mtd, partition_info,
- sizeof partition_info / sizeof partition_info[0]);
+ ARRAY_SIZE(partition_info));
} else {
iounmap(drvdata->regs);
kfree(drvdata);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 4b69aacdf5c..9dff51351f4 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -89,7 +89,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
.eccbytes = 3,
.eccpos = {6, 7, 8},
.oobfree = { {0, 5}, {9, 7} },
- .oobavail = 12,
};
/* Small Page FLASH with FMR[ECCM] = 1 */
@@ -97,7 +96,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
.eccbytes = 3,
.eccpos = {8, 9, 10},
.oobfree = { {0, 5}, {6, 2}, {11, 5} },
- .oobavail = 12,
};
/* Large Page FLASH with FMR[ECCM] = 0 */
@@ -105,7 +103,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
.eccbytes = 12,
.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
- .oobavail = 48,
};
/* Large Page FLASH with FMR[ECCM] = 1 */
@@ -113,7 +110,48 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
.eccbytes = 12,
.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
- .oobavail = 48,
+};
+
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern,
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
};
/*=================================*/
@@ -687,8 +725,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
&fsl_elbc_oob_lp_eccm1 :
&fsl_elbc_oob_lp_eccm0;
- mtd->ecclayout = chip->ecc.layout;
- mtd->oobavail = chip->ecc.layout->oobavail;
+ chip->badblock_pattern = &largepage_memorybased;
}
} else {
dev_err(ctrl->dev,
@@ -752,8 +789,12 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->cmdfunc = fsl_elbc_cmdfunc;
chip->waitfunc = fsl_elbc_wait;
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+ NAND_USE_FLASH_BBT;
chip->controller = &ctrl->controller;
chip->priv = priv;
@@ -795,8 +836,8 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
return 0;
}
-static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
- struct device_node *node)
+static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
+ struct device_node *node)
{
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
struct fsl_elbc_mtd *priv;
@@ -917,7 +958,7 @@ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
return 0;
}
-static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
+static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
{
struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
int i;
@@ -1041,7 +1082,7 @@ static struct of_platform_driver fsl_elbc_ctrl_driver = {
},
.match_table = fsl_elbc_match,
.probe = fsl_elbc_ctrl_probe,
- .remove = __devexit_p(fsl_elbc_ctrl_remove),
+ .remove = fsl_elbc_ctrl_remove,
};
static int __init fsl_elbc_init(void)
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 2d585d2d090..9e59de501c2 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -7,8 +7,6 @@
* Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
* Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
*
- * $Id: h1910.c,v 1.6 2005/11/07 11:14:30 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ba1bdf78732..d1129bae6c2 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -798,6 +798,87 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
+ * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @dataofs offset of requested data within the page
+ * @readlen data length
+ * @buf: buffer to store read data
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+{
+ int start_step, end_step, num_steps;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *p;
+ int data_col_addr, i, gaps = 0;
+ int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+ int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+
+ /* Column address wihin the page aligned to ECC size (256bytes). */
+ start_step = data_offs / chip->ecc.size;
+ end_step = (data_offs + readlen - 1) / chip->ecc.size;
+ num_steps = end_step - start_step + 1;
+
+ /* Data size aligned to ECC ecc.size*/
+ datafrag_len = num_steps * chip->ecc.size;
+ eccfrag_len = num_steps * chip->ecc.bytes;
+
+ data_col_addr = start_step * chip->ecc.size;
+ /* If we read not a page aligned data */
+ if (data_col_addr != 0)
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+ p = bufpoi + data_col_addr;
+ chip->read_buf(mtd, p, datafrag_len);
+
+ /* Calculate ECC */
+ for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+ chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+ /* The performance is faster if to position offsets
+ according to ecc.pos. Let make sure here that
+ there are no gaps in ecc positions */
+ for (i = 0; i < eccfrag_len - 1; i++) {
+ if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
+ eccpos[i + start_step * chip->ecc.bytes + 1]) {
+ gaps = 1;
+ break;
+ }
+ }
+ if (gaps) {
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ } else {
+ /* send the command to read the particular ecc bytes */
+ /* take care about buswidth alignment in read_buf */
+ aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+ aligned_len = eccfrag_len;
+ if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+ aligned_len++;
+ if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+ aligned_len++;
+
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+ chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+ }
+
+ for (i = 0; i < eccfrag_len; i++)
+ chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+
+ p = bufpoi + data_col_addr;
+ for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+ int stat;
+
+ stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+ if (stat == -1)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+ }
+ return 0;
+}
+
+/**
* nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -994,6 +1075,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/* Now read the page into the buffer */
if (unlikely(ops->mode == MTD_OOB_RAW))
ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+ else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+ ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
else
ret = chip->ecc.read_page(mtd, chip, bufpoi);
if (ret < 0)
@@ -1001,7 +1084,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/* Transfer not aligned data */
if (!aligned) {
- chip->pagebuf = realpage;
+ if (!NAND_SUBPAGE_READ(chip) && !oob)
+ chip->pagebuf = realpage;
memcpy(buf, chip->buffers->databuf + col, bytes);
}
@@ -2521,6 +2605,7 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.calculate = nand_calculate_ecc;
chip->ecc.correct = nand_correct_data;
chip->ecc.read_page = nand_read_page_swecc;
+ chip->ecc.read_subpage = nand_read_subpage;
chip->ecc.write_page = nand_write_page_swecc;
chip->ecc.read_oob = nand_read_oob_std;
chip->ecc.write_oob = nand_write_oob_std;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 5e121ceaa59..0b1c48595f1 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,8 +6,6 @@
*
* Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
*
- * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 9003a135e05..918a806a847 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -9,8 +9,6 @@
*
* Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
*
- * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $
- *
* This file is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 or (at your option) any
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a3e3ab0185d..69ee2c90eb0 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -3,8 +3,6 @@
*
* Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
*
- * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index bb885d1fcab..ecd70e2504f 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -21,8 +21,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $
*/
#include <linux/init.h>
@@ -39,6 +37,7 @@
#include <linux/delay.h>
#include <linux/list.h>
#include <linux/random.h>
+#include <asm/div64.h>
/* Default simulator parameters values */
#if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \
@@ -298,11 +297,11 @@ struct nandsim {
/* NAND flash "geometry" */
struct nandsin_geometry {
- uint32_t totsz; /* total flash size, bytes */
+ uint64_t totsz; /* total flash size, bytes */
uint32_t secsz; /* flash sector (erase block) size, bytes */
uint pgsz; /* NAND flash page size, bytes */
uint oobsz; /* page OOB area size, bytes */
- uint32_t totszoob; /* total flash size including OOB, bytes */
+ uint64_t totszoob; /* total flash size including OOB, bytes */
uint pgszoob; /* page size including OOB , bytes*/
uint secszoob; /* sector size including OOB, bytes */
uint pgnum; /* total number of pages */
@@ -459,6 +458,12 @@ static char *get_partition_name(int i)
return kstrdup(buf, GFP_KERNEL);
}
+static u_int64_t divide(u_int64_t n, u_int32_t d)
+{
+ do_div(n, d);
+ return n;
+}
+
/*
* Initialize the nandsim structure.
*
@@ -469,8 +474,8 @@ static int init_nandsim(struct mtd_info *mtd)
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
struct nandsim *ns = (struct nandsim *)(chip->priv);
int i, ret = 0;
- u_int32_t remains;
- u_int32_t next_offset;
+ u_int64_t remains;
+ u_int64_t next_offset;
if (NS_IS_INITIALIZED(ns)) {
NS_ERR("init_nandsim: nandsim is already initialized\n");
@@ -487,8 +492,8 @@ static int init_nandsim(struct mtd_info *mtd)
ns->geom.oobsz = mtd->oobsize;
ns->geom.secsz = mtd->erasesize;
ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
- ns->geom.pgnum = ns->geom.totsz / ns->geom.pgsz;
- ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz;
+ ns->geom.pgnum = divide(ns->geom.totsz, ns->geom.pgsz);
+ ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
ns->geom.secshift = ffs(ns->geom.secsz) - 1;
ns->geom.pgshift = chip->page_shift;
ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
@@ -511,7 +516,7 @@ static int init_nandsim(struct mtd_info *mtd)
}
if (ns->options & OPT_SMALLPAGE) {
- if (ns->geom.totsz < (32 << 20)) {
+ if (ns->geom.totsz <= (32 << 20)) {
ns->geom.pgaddrbytes = 3;
ns->geom.secaddrbytes = 2;
} else {
@@ -537,15 +542,16 @@ static int init_nandsim(struct mtd_info *mtd)
remains = ns->geom.totsz;
next_offset = 0;
for (i = 0; i < parts_num; ++i) {
- unsigned long part = parts[i];
- if (!part || part > remains / ns->geom.secsz) {
+ u_int64_t part_sz = (u_int64_t)parts[i] * ns->geom.secsz;
+
+ if (!part_sz || part_sz > remains) {
NS_ERR("bad partition size.\n");
ret = -EINVAL;
goto error;
}
ns->partitions[i].name = get_partition_name(i);
ns->partitions[i].offset = next_offset;
- ns->partitions[i].size = part * ns->geom.secsz;
+ ns->partitions[i].size = part_sz;
next_offset += ns->partitions[i].size;
remains -= ns->partitions[i].size;
}
@@ -573,7 +579,7 @@ static int init_nandsim(struct mtd_info *mtd)
if (ns->busw == 16)
NS_WARN("16-bit flashes support wasn't tested\n");
- printk("flash size: %u MiB\n", ns->geom.totsz >> 20);
+ printk("flash size: %llu MiB\n", ns->geom.totsz >> 20);
printk("page size: %u bytes\n", ns->geom.pgsz);
printk("OOB area size: %u bytes\n", ns->geom.oobsz);
printk("sector size: %u KiB\n", ns->geom.secsz >> 10);
@@ -583,7 +589,7 @@ static int init_nandsim(struct mtd_info *mtd)
printk("bits in sector size: %u\n", ns->geom.secshift);
printk("bits in page size: %u\n", ns->geom.pgshift);
printk("bits in OOB size: %u\n", ns->geom.oobshift);
- printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10);
+ printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10);
printk("page address bytes: %u\n", ns->geom.pgaddrbytes);
printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
printk("options: %#x\n", ns->options);
@@ -825,7 +831,7 @@ static int setup_wear_reporting(struct mtd_info *mtd)
if (!rptwear)
return 0;
- wear_eb_count = mtd->size / mtd->erasesize;
+ wear_eb_count = divide(mtd->size, mtd->erasesize);
mem = wear_eb_count * sizeof(unsigned long);
if (mem / sizeof(unsigned long) != wear_eb_count) {
NS_ERR("Too many erase blocks for wear reporting\n");
@@ -2013,7 +2019,7 @@ static int __init ns_init_module(void)
}
if (overridesize) {
- u_int32_t new_size = nsmtd->erasesize << overridesize;
+ u_int64_t new_size = (u_int64_t)nsmtd->erasesize << overridesize;
if (new_size >> overridesize != nsmtd->erasesize) {
NS_ERR("overridesize is too big\n");
goto err_exit;
@@ -2021,7 +2027,8 @@ static int __init ns_init_module(void)
/* N.B. This relies on nand_scan not doing anything with the size before we change it */
nsmtd->size = new_size;
chip->chipsize = new_size;
- chip->chip_shift = ffs(new_size) - 1;
+ chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
+ chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
}
if ((retval = setup_wear_reporting(nsmtd)) != 0)
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 082073acf20..cc865843185 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -6,8 +6,6 @@
* Derived from drivers/mtd/nand/edb7312.c
*
*
- * $Id: ppchameleonevb.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 26f88215bc4..a033c4cd8e1 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -6,8 +6,6 @@
* Derived from drivers/mtd/nand/spia.c
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
*
- * $Id: rtc_from4.c,v 1.10 2005/11/07 11:14:31 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index b34a460ab67..556139ed1fd 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -1,26 +1,10 @@
/* linux/drivers/mtd/nand/s3c2410.c
*
- * Copyright (c) 2004,2005 Simtec Electronics
- * http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright © 2004-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C2410/S3C240 NAND driver
- *
- * Changelog:
- * 21-Sep-2004 BJD Initial version
- * 23-Sep-2004 BJD Multiple device support
- * 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
- * 12-Oct-2004 BJD Fixed errors in use of platform data
- * 18-Feb-2005 BJD Fix sparse errors
- * 14-Mar-2005 BJD Applied tglx's code reduction patch
- * 02-May-2005 BJD Fixed s3c2440 support
- * 02-May-2005 BJD Reduced hwcontrol decode
- * 20-Jun-2005 BJD Updated s3c2440 support, fixed timing bug
- * 08-Jul-2005 BJD Fix OOPS when no platform data supplied
- * 20-Oct-2005 BJD Fix timing calculation bug
- * 14-Jan-2006 BJD Allow clock to be stopped when idle
- *
- * $Id: s3c2410.c,v 1.23 2006/04/01 18:06:29 bjd Exp $
+ * Samsung S3C2410/S3C2440/S3C2412 NAND driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -52,6 +36,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -120,8 +105,13 @@ struct s3c2410_nand_info {
int sel_bit;
int mtd_count;
unsigned long save_sel;
+ unsigned long clk_rate;
enum s3c_cpu_type cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
};
/* conversion functions */
@@ -179,17 +169,18 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
/* controller setup */
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
- struct platform_device *pdev)
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
{
- struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
- unsigned long clkrate = clk_get_rate(info->clk);
+ struct s3c2410_platform_nand *plat = info->platform;
int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
int tacls, twrph0, twrph1;
- unsigned long cfg = 0;
+ unsigned long clkrate = clk_get_rate(info->clk);
+ unsigned long set, cfg, mask;
+ unsigned long flags;
/* calculate the timing information for the controller */
+ info->clk_rate = clkrate;
clkrate /= 1000; /* turn clock into kHz for ease of use */
if (plat != NULL) {
@@ -211,28 +202,69 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ mask = (S3C2410_NFCONF_TACLS(3) |
+ S3C2410_NFCONF_TWRPH0(7) |
+ S3C2410_NFCONF_TWRPH1(7));
+ set = S3C2410_NFCONF_EN;
+ set |= S3C2410_NFCONF_TACLS(tacls - 1);
+ set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+ break;
+
+ case TYPE_S3C2440:
+ case TYPE_S3C2412:
+ mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
+ S3C2410_NFCONF_TWRPH0(7) |
+ S3C2410_NFCONF_TWRPH1(7));
+
+ set = S3C2440_NFCONF_TACLS(tacls - 1);
+ set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+ break;
+
+ default:
+ /* keep compiler happy */
+ mask = 0;
+ set = 0;
+ BUG();
+ }
+
+ dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
+ local_irq_save(flags);
+
+ cfg = readl(info->regs + S3C2410_NFCONF);
+ cfg &= ~mask;
+ cfg |= set;
+ writel(cfg, info->regs + S3C2410_NFCONF);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+ int ret;
+
+ ret = s3c2410_nand_setrate(info);
+ if (ret < 0)
+ return ret;
+
switch (info->cpu_type) {
case TYPE_S3C2410:
- cfg = S3C2410_NFCONF_EN;
- cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
- cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
- cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+ default:
break;
case TYPE_S3C2440:
case TYPE_S3C2412:
- cfg = S3C2440_NFCONF_TACLS(tacls - 1);
- cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
- cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
-
/* enable the controller and de-assert nFCE */
writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
}
- dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
- writel(cfg, info->regs + S3C2410_NFCONF);
return 0;
}
@@ -513,6 +545,52 @@ static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
}
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c2410_nand_info *info;
+ unsigned long newclk;
+
+ info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+ newclk = clk_get_rate(info->clk);
+
+ if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+ (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+ s3c2410_nand_setrate(info);
+ }
+
+ return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+ return cpufreq_register_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+ cpufreq_unregister_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ return 0;
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
/* device management functions */
static int s3c2410_nand_remove(struct platform_device *pdev)
@@ -524,9 +602,10 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
if (info == NULL)
return 0;
- /* first thing we need to do is release all our mtds
- * and their partitions, then go through freeing the
- * resources used
+ s3c2410_nand_cpufreq_deregister(info);
+
+ /* Release all our mtds and their partitions, then go through
+ * freeing the resources used
*/
if (info->mtds != NULL) {
@@ -691,7 +770,8 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
{
struct nand_chip *chip = &nmtd->chip;
- printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift);
+ dev_dbg(info->device, "chip %p => page shift %d\n",
+ chip, chip->page_shift);
if (hardware_ecc) {
/* change the behaviour depending on wether we are using
@@ -784,7 +864,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
/* initialise the hardware */
- err = s3c2410_nand_inithw(info, pdev);
+ err = s3c2410_nand_inithw(info);
if (err != 0)
goto exit_error;
@@ -827,6 +907,12 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
sets++;
}
+ err = s3c2410_nand_cpufreq_register(info);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to init cpufreq support\n");
+ goto exit_error;
+ }
+
if (allow_clk_stop(info)) {
dev_info(&pdev->dev, "clock idle support enabled\n");
clk_disable(info->clk);
@@ -874,7 +960,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
if (info) {
clk_enable(info->clk);
- s3c2410_nand_inithw(info, dev);
+ s3c2410_nand_inithw(info);
/* Restore the state of the nFCE line. */
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 033f8800b1e..6dba2fb66ae 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -3,8 +3,6 @@
*
* Copyright (C) 2004 Richard Purdie
*
- * $Id: sharpsl.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
* Based on Sharp's NAND driver sharp_sl.c
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
index 1f6d429b158..0cc6d0acb8f 100644
--- a/drivers/mtd/nand/spia.c
+++ b/drivers/mtd/nand/spia.c
@@ -8,8 +8,6 @@
* to controllines (due to change in nand.c)
* page_cache added
*
- * $Id: spia.c,v 1.25 2005/11/07 11:14:31 gleixner Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
index f9e2d4a0ab8..bbf492e6830 100644
--- a/drivers/mtd/nand/toto.c
+++ b/drivers/mtd/nand/toto.c
@@ -14,8 +14,6 @@
* Overview:
* This is a device driver for the NAND flash device found on the
* TI fido board. It supports 32MiB and 64MiB cards
- *
- * $Id: toto.c,v 1.5 2005/11/07 11:14:31 gleixner Exp $
*/
#include <linux/slab.h>
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index f40081069ab..807a72752ee 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -9,8 +9,6 @@
* Derived from drivers/mtd/nand/autcpu12.c
* Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
*
- * $Id: ts7250.c,v 1.4 2004/12/30 22:02:07 joff Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 07:51:48 +0000