aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/e1000/e1000_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000/e1000_main.c')
-rw-r--r--drivers/net/e1000/e1000_main.c120
1 files changed, 104 insertions, 16 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cc0c77c4c17..f5c6f08966c 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -366,6 +366,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
{
uint32_t ctrl_ext;
uint32_t swsm;
+ uint32_t extcnf;
/* Let firmware taken over control of h/w */
switch (adapter->hw.mac_type) {
@@ -380,6 +381,11 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
swsm = E1000_READ_REG(&adapter->hw, SWSM);
E1000_WRITE_REG(&adapter->hw, SWSM,
swsm & ~E1000_SWSM_DRV_LOAD);
+ case e1000_ich8lan:
+ extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
+ break;
default:
break;
}
@@ -401,6 +407,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
{
uint32_t ctrl_ext;
uint32_t swsm;
+ uint32_t extcnf;
/* Let firmware know the driver has taken over */
switch (adapter->hw.mac_type) {
case e1000_82571:
@@ -415,6 +422,11 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
E1000_WRITE_REG(&adapter->hw, SWSM,
swsm | E1000_SWSM_DRV_LOAD);
break;
+ case e1000_ich8lan:
+ extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
+ E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
+ extcnf | E1000_EXTCNF_CTRL_SWFLAG);
+ break;
default:
break;
}
@@ -490,6 +502,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
* (b) AMT is active
* (c) SoL/IDER session is active */
if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
adapter->hw.media_type == e1000_media_type_copper &&
!(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
!mng_mode_enabled &&
@@ -561,6 +574,9 @@ e1000_reset(struct e1000_adapter *adapter)
case e1000_82573:
pba = E1000_PBA_12K;
break;
+ case e1000_ich8lan:
+ pba = E1000_PBA_8K;
+ break;
default:
pba = E1000_PBA_48K;
break;
@@ -585,6 +601,12 @@ e1000_reset(struct e1000_adapter *adapter)
/* Set the FC high water mark to 90% of the FIFO size.
* Required to clear last 3 LSB */
fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+ /* We can't use 90% on small FIFOs because the remainder
+ * would be less than 1 full frame. In this case, we size
+ * it to allow at least a full frame above the high water
+ * mark. */
+ if (pba < E1000_PBA_16K)
+ fc_high_water_mark = (pba * 1024) - 1600;
adapter->hw.fc_high_water = fc_high_water_mark;
adapter->hw.fc_low_water = fc_high_water_mark - 8;
@@ -622,6 +644,8 @@ e1000_reset(struct e1000_adapter *adapter)
phy_data);
}
+ if (adapter->hw.mac_type < e1000_ich8lan)
+ /* FIXME: this code is duplicate and wrong for PCI Express */
if (adapter->en_mng_pt) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
@@ -648,6 +672,7 @@ e1000_probe(struct pci_dev *pdev,
struct net_device *netdev;
struct e1000_adapter *adapter;
unsigned long mmio_start, mmio_len;
+ unsigned long flash_start, flash_len;
static int cards_found = 0;
static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
@@ -657,10 +682,12 @@ e1000_probe(struct pci_dev *pdev,
if ((err = pci_enable_device(pdev)))
return err;
- if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+ if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
+ !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
pci_using_dac = 1;
} else {
- if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+ if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
+ (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
E1000_ERR("No usable DMA configuration, aborting\n");
return err;
}
@@ -740,6 +767,19 @@ e1000_probe(struct pci_dev *pdev,
if ((err = e1000_sw_init(adapter)))
goto err_sw_init;
+ /* Flash BAR mapping must happen after e1000_sw_init
+ * because it depends on mac_type */
+ if ((adapter->hw.mac_type == e1000_ich8lan) &&
+ (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+ flash_start = pci_resource_start(pdev, 1);
+ flash_len = pci_resource_len(pdev, 1);
+ adapter->hw.flash_address = ioremap(flash_start, flash_len);
+ if (!adapter->hw.flash_address) {
+ err = -EIO;
+ goto err_flashmap;
+ }
+ }
+
if ((err = e1000_check_phy_reset_block(&adapter->hw)))
DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
@@ -758,6 +798,8 @@ e1000_probe(struct pci_dev *pdev,
NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
NETIF_F_HW_VLAN_FILTER;
+ if (adapter->hw.mac_type == e1000_ich8lan)
+ netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
}
#ifdef NETIF_F_TSO
@@ -773,11 +815,17 @@ e1000_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- /* hard_start_xmit is safe against parallel locking */
netdev->features |= NETIF_F_LLTX;
adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
+ /* initialize eeprom parameters */
+
+ if (e1000_init_eeprom_params(&adapter->hw)) {
+ E1000_ERR("EEPROM initialization failed\n");
+ return -EIO;
+ }
+
/* before reading the EEPROM, reset the controller to
* put the device in a known good starting state */
@@ -845,6 +893,11 @@ e1000_probe(struct pci_dev *pdev,
EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
eeprom_apme_mask = E1000_EEPROM_82544_APM;
break;
+ case e1000_ich8lan:
+ e1000_read_eeprom(&adapter->hw,
+ EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
+ break;
case e1000_82546:
case e1000_82546_rev_3:
case e1000_82571:
@@ -904,6 +957,9 @@ e1000_probe(struct pci_dev *pdev,
return 0;
err_register:
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+err_flashmap:
err_sw_init:
err_eeprom:
iounmap(adapter->hw.hw_addr);
@@ -937,6 +993,7 @@ e1000_remove(struct pci_dev *pdev)
flush_scheduled_work();
if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
if (manc & E1000_MANC_SMBUS_EN) {
@@ -965,6 +1022,8 @@ e1000_remove(struct pci_dev *pdev)
#endif
iounmap(adapter->hw.hw_addr);
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
pci_release_regions(pdev);
free_netdev(netdev);
@@ -1015,13 +1074,6 @@ e1000_sw_init(struct e1000_adapter *adapter)
return -EIO;
}
- /* initialize eeprom parameters */
-
- if (e1000_init_eeprom_params(hw)) {
- E1000_ERR("EEPROM initialization failed\n");
- return -EIO;
- }
-
switch (hw->mac_type) {
default:
break;
@@ -1257,8 +1309,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter,
int size;
size = sizeof(struct e1000_buffer) * txdr->count;
-
- txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+ txdr->buffer_info = vmalloc(size);
if (!txdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the transmit descriptor ring\n");
@@ -1486,7 +1537,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter,
int size, desc_len;
size = sizeof(struct e1000_buffer) * rxdr->count;
- rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+ rxdr->buffer_info = vmalloc(size);
if (!rxdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the receive descriptor ring\n");
@@ -2145,6 +2196,12 @@ e1000_set_multi(struct net_device *netdev)
uint32_t rctl;
uint32_t hash_value;
int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
+ E1000_NUM_MTA_REGISTERS_ICH8LAN :
+ E1000_NUM_MTA_REGISTERS;
+
+ if (adapter->hw.mac_type == e1000_ich8lan)
+ rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
/* reserve RAR[14] for LAA over-write work-around */
if (adapter->hw.mac_type == e1000_82571)
@@ -2191,7 +2248,7 @@ e1000_set_multi(struct net_device *netdev)
/* clear the old settings from the multicast hash table */
- for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++) {
+ for (i = 0; i < mta_reg_count; i++) {
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
E1000_WRITE_FLUSH(hw);
}
@@ -2270,8 +2327,16 @@ e1000_watchdog(unsigned long data)
struct net_device *netdev = adapter->netdev;
struct e1000_tx_ring *txdr = adapter->tx_ring;
uint32_t link, tctl;
-
- e1000_check_for_link(&adapter->hw);
+ int32_t ret_val;
+
+ ret_val = e1000_check_for_link(&adapter->hw);
+ if ((ret_val == E1000_ERR_PHY) &&
+ (adapter->hw.phy_type == e1000_phy_igp_3) &&
+ (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ /* See e1000_kumeran_lock_loss_workaround() */
+ DPRINTK(LINK, INFO,
+ "Gigabit has been disabled, downgrading speed\n");
+ }
if (adapter->hw.mac_type == e1000_82573) {
e1000_enable_tx_pkt_filtering(&adapter->hw);
if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
@@ -2837,6 +2902,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
case e1000_82571:
case e1000_82572:
case e1000_82573:
+ case e1000_ich8lan:
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
DPRINTK(DRV, ERR,
@@ -3021,6 +3087,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
/* Adapter-specific max frame size limits. */
switch (adapter->hw.mac_type) {
case e1000_undefined ... e1000_82542_rev2_1:
+ case e1000_ich8lan:
if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
return -EINVAL;
@@ -3129,12 +3196,15 @@ e1000_update_stats(struct e1000_adapter *adapter)
adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
adapter->stats.roc += E1000_READ_REG(hw, ROC);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+ }
adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
adapter->stats.mpc += E1000_READ_REG(hw, MPC);
@@ -3162,12 +3232,16 @@ e1000_update_stats(struct e1000_adapter *adapter)
adapter->stats.totl += E1000_READ_REG(hw, TOTL);
adapter->stats.toth += E1000_READ_REG(hw, TOTH);
adapter->stats.tpr += E1000_READ_REG(hw, TPR);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+ }
+
adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
@@ -3189,6 +3263,8 @@ e1000_update_stats(struct e1000_adapter *adapter)
if (hw->mac_type > e1000_82547_rev_2) {
adapter->stats.iac += E1000_READ_REG(hw, IAC);
adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
@@ -3196,6 +3272,7 @@ e1000_update_stats(struct e1000_adapter *adapter)
adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+ }
}
/* Fill out the OS statistics structure */
@@ -4330,18 +4407,21 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
ctrl |= E1000_CTRL_VME;
E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+ if (adapter->hw.mac_type != e1000_ich8lan) {
/* enable VLAN receive filtering */
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl |= E1000_RCTL_VFE;
rctl &= ~E1000_RCTL_CFIEN;
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
e1000_update_mng_vlan(adapter);
+ }
} else {
/* disable VLAN tag insert/strip */
ctrl = E1000_READ_REG(&adapter->hw, CTRL);
ctrl &= ~E1000_CTRL_VME;
E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+ if (adapter->hw.mac_type != e1000_ich8lan) {
/* disable VLAN filtering */
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl &= ~E1000_RCTL_VFE;
@@ -4350,6 +4430,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
}
+ }
}
e1000_irq_enable(adapter);
@@ -4578,7 +4659,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
pci_enable_wake(pdev, PCI_D3cold, 0);
}
+ /* FIXME: this code is incorrect for PCI Express */
if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
if (manc & E1000_MANC_SMBUS_EN) {
@@ -4589,6 +4672,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
}
}
+ if (adapter->hw.phy_type == e1000_phy_igp_3)
+ e1000_phy_powerdown_workaround(&adapter->hw);
+
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
e1000_release_hw_control(adapter);
@@ -4624,7 +4710,9 @@ e1000_resume(struct pci_dev *pdev)
netif_device_attach(netdev);
+ /* FIXME: this code is incorrect for PCI Express */
if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc &= ~(E1000_MANC_ARP_EN);