aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_common.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_common.c972
1 files changed, 637 insertions, 335 deletions
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 9c0d0a1964e..f67c68404bb 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -20,7 +20,6 @@
the file called "COPYING".
Contact Information:
- Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
@@ -33,20 +32,28 @@
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
-static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw);
-
static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw);
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+ u16 count);
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw);
-static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw);
-static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw);
+static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
+static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
+static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
/**
- * ixgbe_start_hw - Prepare hardware for TX/RX
+ * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
* @hw: pointer to hardware structure
*
* Starts the hardware by filling the bus info structure and media type, clears
@@ -54,7 +61,7 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
* table, VLAN filter table, calls routine to set up link and flow control
* settings, and leaves transmit and receive units disabled and uninitialized
**/
-s32 ixgbe_start_hw(struct ixgbe_hw *hw)
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
{
u32 ctrl_ext;
@@ -62,22 +69,22 @@ s32 ixgbe_start_hw(struct ixgbe_hw *hw)
hw->phy.media_type = hw->mac.ops.get_media_type(hw);
/* Identify the PHY */
- ixgbe_identify_phy(hw);
+ hw->phy.ops.identify(hw);
/*
* Store MAC address from RAR0, clear receive address registers, and
* clear the multicast table
*/
- ixgbe_init_rx_addrs(hw);
+ hw->mac.ops.init_rx_addrs(hw);
/* Clear the VLAN filter table */
- ixgbe_clear_vfta(hw);
+ hw->mac.ops.clear_vfta(hw);
/* Set up link */
hw->mac.ops.setup_link(hw);
/* Clear statistics registers */
- ixgbe_clear_hw_cntrs(hw);
+ hw->mac.ops.clear_hw_cntrs(hw);
/* Set No Snoop Disable */
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
@@ -92,34 +99,34 @@ s32 ixgbe_start_hw(struct ixgbe_hw *hw)
}
/**
- * ixgbe_init_hw - Generic hardware initialization
+ * ixgbe_init_hw_generic - Generic hardware initialization
* @hw: pointer to hardware structure
*
- * Initialize the hardware by reseting the hardware, filling the bus info
+ * Initialize the hardware by resetting the hardware, filling the bus info
* structure and media type, clears all on chip counters, initializes receive
* address registers, multicast table, VLAN filter table, calls routine to set
* up link and flow control settings, and leaves transmit and receive units
* disabled and uninitialized
**/
-s32 ixgbe_init_hw(struct ixgbe_hw *hw)
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
{
/* Reset the hardware */
- hw->mac.ops.reset(hw);
+ hw->mac.ops.reset_hw(hw);
/* Start the HW */
- ixgbe_start_hw(hw);
+ hw->mac.ops.start_hw(hw);
return 0;
}
/**
- * ixgbe_clear_hw_cntrs - Generic clear hardware counters
+ * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
* @hw: pointer to hardware structure
*
* Clears all hardware statistics counters by reading them from the hardware
* Statistics counters are clear on read.
**/
-static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
{
u16 i = 0;
@@ -191,7 +198,36 @@ static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
}
/**
- * ixgbe_get_mac_addr - Generic get MAC address
+ * ixgbe_read_pba_num_generic - Reads part number from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number from the EEPROM
+ *
+ * Reads the part number from the EEPROM.
+ **/
+s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
+{
+ s32 ret_val;
+ u16 data;
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+ *pba_num = (u32)(data << 16);
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+ *pba_num |= data;
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_mac_addr_generic - Generic get MAC address
* @hw: pointer to hardware structure
* @mac_addr: Adapter MAC address
*
@@ -199,7 +235,7 @@ static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
* A reset of the adapter must be performed prior to calling this function
* in order for the MAC address to have been loaded from the EEPROM into RAR0
**/
-s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
{
u32 rar_high;
u32 rar_low;
@@ -217,30 +253,8 @@ s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
return 0;
}
-s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num)
-{
- s32 ret_val;
- u16 data;
-
- ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM0_PTR, &data);
- if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
- return ret_val;
- }
- *part_num = (u32)(data << 16);
-
- ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM1_PTR, &data);
- if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
- return ret_val;
- }
- *part_num |= data;
-
- return 0;
-}
-
/**
- * ixgbe_stop_adapter - Generic stop TX/RX units
+ * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
* @hw: pointer to hardware structure
*
* Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
@@ -248,7 +262,7 @@ s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num)
* the shared code and drivers to determine if the adapter is in a stopped
* state and should not touch the hardware.
**/
-s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
{
u32 number_of_queues;
u32 reg_val;
@@ -264,6 +278,7 @@ s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
reg_val &= ~(IXGBE_RXCTRL_RXEN);
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
+ IXGBE_WRITE_FLUSH(hw);
msleep(2);
/* Clear interrupt mask to stop from interrupts being generated */
@@ -273,7 +288,7 @@ s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
IXGBE_READ_REG(hw, IXGBE_EICR);
/* Disable the transmit unit. Each queue must be disabled. */
- number_of_queues = hw->mac.num_tx_queues;
+ number_of_queues = hw->mac.max_tx_queues;
for (i = 0; i < number_of_queues; i++) {
reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
if (reg_val & IXGBE_TXDCTL_ENABLE) {
@@ -282,15 +297,22 @@ s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
}
}
+ /*
+ * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+ * access and verify no pending requests
+ */
+ if (ixgbe_disable_pcie_master(hw) != 0)
+ hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+
return 0;
}
/**
- * ixgbe_led_on - Turns on the software controllable LEDs.
+ * ixgbe_led_on_generic - Turns on the software controllable LEDs.
* @hw: pointer to hardware structure
* @index: led number to turn on
**/
-s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
{
u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
@@ -304,11 +326,11 @@ s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
}
/**
- * ixgbe_led_off - Turns off the software controllable LEDs.
+ * ixgbe_led_off_generic - Turns off the software controllable LEDs.
* @hw: pointer to hardware structure
* @index: led number to turn off
**/
-s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
{
u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
@@ -321,15 +343,14 @@ s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
return 0;
}
-
/**
- * ixgbe_init_eeprom - Initialize EEPROM params
+ * ixgbe_init_eeprom_params_generic - Initialize EEPROM params
* @hw: pointer to hardware structure
*
* Initializes the EEPROM parameters ixgbe_eeprom_info within the
* ixgbe_hw struct in order to set up EEPROM access.
**/
-s32 ixgbe_init_eeprom(struct ixgbe_hw *hw)
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
{
struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
u32 eec;
@@ -337,6 +358,9 @@ s32 ixgbe_init_eeprom(struct ixgbe_hw *hw)
if (eeprom->type == ixgbe_eeprom_uninitialized) {
eeprom->type = ixgbe_eeprom_none;
+ /* Set default semaphore delay to 10ms which is a well
+ * tested value */
+ eeprom->semaphore_delay = 10;
/*
* Check for EEPROM present first.
@@ -369,18 +393,85 @@ s32 ixgbe_init_eeprom(struct ixgbe_hw *hw)
}
/**
- * ixgbe_read_eeprom - Read EEPROM word using EERD
+ * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
+ *
+ * Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status;
+ u16 word_in;
+ u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /* Prepare the EEPROM for reading */
+ status = ixgbe_acquire_eeprom(hw);
+
+ if (status == 0) {
+ if (ixgbe_ready_eeprom(hw) != 0) {
+ ixgbe_release_eeprom(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ if (status == 0) {
+ ixgbe_standby_eeprom(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((hw->eeprom.address_bits == 8) && (offset >= 128))
+ read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
+ hw->eeprom.address_bits);
+
+ /* Read the data. */
+ word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+ *data = (word_in >> 8) | (word_in << 8);
+
+ /* End this read operation */
+ ixgbe_release_eeprom(hw);
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_generic - Read EEPROM word using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @data: word read from the EEPROM
*
* Reads a 16 bit word from the EEPROM using the EERD register.
**/
-s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
+s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
u32 eerd;
s32 status;
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) +
IXGBE_EEPROM_READ_REG_START;
@@ -389,10 +480,11 @@ s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
if (status == 0)
*data = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
- IXGBE_EEPROM_READ_REG_DATA);
+ IXGBE_EEPROM_READ_REG_DATA);
else
hw_dbg(hw, "Eeprom read timed out\n");
+out:
return status;
}
@@ -420,6 +512,58 @@ static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw)
}
/**
+ * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ *
+ * Prepares EEPROM for access using bit-bang method. This function should
+ * be called before issuing a command to the EEPROM.
+ **/
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 eec;
+ u32 i;
+
+ if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ if (status == 0) {
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /* Request EEPROM Access */
+ eec |= IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+ for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (eec & IXGBE_EEC_GNT)
+ break;
+ udelay(5);
+ }
+
+ /* Release if grant not acquired */
+ if (!(eec & IXGBE_EEC_GNT)) {
+ eec &= ~IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ hw_dbg(hw, "Could not acquire EEPROM grant\n");
+
+ ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ /* Setup EEPROM for Read/Write */
+ if (status == 0) {
+ /* Clear CS and SK */
+ eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+ }
+ return status;
+}
+
+/**
* ixgbe_get_eeprom_semaphore - Get hardware semaphore
* @hw: pointer to hardware structure
*
@@ -475,7 +619,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
*/
if (i >= timeout) {
hw_dbg(hw, "Driver can't access the Eeprom - Semaphore "
- "not granted.\n");
+ "not granted.\n");
ixgbe_release_eeprom_semaphore(hw);
status = IXGBE_ERR_EEPROM;
}
@@ -503,6 +647,217 @@ static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
}
/**
+ * ixgbe_ready_eeprom - Polls for EEPROM ready
+ * @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u16 i;
+ u8 spi_stat_reg;
+
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
+ ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
+ spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
+ if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ ixgbe_standby_eeprom(hw);
+ };
+
+ /*
+ * On some parts, SPI write time could vary from 0-20mSec on 3.3V
+ * devices (and only 0-5mSec on 5V devices)
+ */
+ if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
+ hw_dbg(hw, "SPI EEPROM Status error\n");
+ status = IXGBE_ERR_EEPROM;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: pointer to hardware structure
+ **/
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
+{
+ u32 eec;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /* Toggle CS to flush commands */
+ eec |= IXGBE_EEC_CS;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+ eec &= ~IXGBE_EEC_CS;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ * @hw: pointer to hardware structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ **/
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+ u16 count)
+{
+ u32 eec;
+ u32 mask;
+ u32 i;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /*
+ * Mask is used to shift "count" bits of "data" out to the EEPROM
+ * one bit at a time. Determine the starting bit based on count
+ */
+ mask = 0x01 << (count - 1);
+
+ for (i = 0; i < count; i++) {
+ /*
+ * A "1" is shifted out to the EEPROM by setting bit "DI" to a
+ * "1", and then raising and then lowering the clock (the SK
+ * bit controls the clock input to the EEPROM). A "0" is
+ * shifted out to the EEPROM by setting "DI" to "0" and then
+ * raising and then lowering the clock.
+ */
+ if (data & mask)
+ eec |= IXGBE_EEC_DI;
+ else
+ eec &= ~IXGBE_EEC_DI;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+
+ udelay(1);
+
+ ixgbe_raise_eeprom_clk(hw, &eec);
+ ixgbe_lower_eeprom_clk(hw, &eec);
+
+ /*
+ * Shift mask to signify next bit of data to shift in to the
+ * EEPROM
+ */
+ mask = mask >> 1;
+ };
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eec &= ~IXGBE_EEC_DI;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
+{
+ u32 eec;
+ u32 i;
+ u16 data = 0;
+
+ /*
+ * In order to read a register from the EEPROM, we need to shift
+ * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
+ * the clock input to the EEPROM (setting the SK bit), and then reading
+ * the value of the "DO" bit. During this "shifting in" process the
+ * "DI" bit should always be clear.
+ */
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ ixgbe_raise_eeprom_clk(hw, &eec);
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec &= ~(IXGBE_EEC_DI);
+ if (eec & IXGBE_EEC_DO)
+ data |= 1;
+
+ ixgbe_lower_eeprom_clk(hw, &eec);
+ }
+
+ return data;
+}
+
+/**
+ * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eec: EEC register's current value
+ **/
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+ /*
+ * Raise the clock input to the EEPROM
+ * (setting the SK bit), then delay
+ */
+ *eec = *eec | IXGBE_EEC_SK;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eecd: EECD's current value
+ **/
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+ /*
+ * Lower the clock input to the EEPROM (clearing the SK bit), then
+ * delay
+ */
+ *eec = *eec & ~IXGBE_EEC_SK;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_release_eeprom - Release EEPROM, release semaphores
+ * @hw: pointer to hardware structure
+ **/
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
+{
+ u32 eec;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec |= IXGBE_EEC_CS; /* Pull CS high */
+ eec &= ~IXGBE_EEC_SK; /* Lower SCK */
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+
+ udelay(1);
+
+ /* Stop requesting EEPROM access */
+ eec &= ~IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+ ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+}
+
+/**
* ixgbe_calc_eeprom_checksum - Calculates and returns the checksum
* @hw: pointer to hardware structure
**/
@@ -517,7 +872,7 @@ static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
/* Include 0x0-0x3F in the checksum */
for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
- if (ixgbe_read_eeprom(hw, i, &word) != 0) {
+ if (hw->eeprom.ops.read(hw, i, &word) != 0) {
hw_dbg(hw, "EEPROM read failed\n");
break;
}
@@ -526,15 +881,15 @@ static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
/* Include all data from pointers except for the fw pointer */
for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
- ixgbe_read_eeprom(hw, i, &pointer);
+ hw->eeprom.ops.read(hw, i, &pointer);
/* Make sure the pointer seems valid */
if (pointer != 0xFFFF && pointer != 0) {
- ixgbe_read_eeprom(hw, pointer, &length);
+ hw->eeprom.ops.read(hw, pointer, &length);
if (length != 0xFFFF && length != 0) {
for (j = pointer+1; j <= pointer+length; j++) {
- ixgbe_read_eeprom(hw, j, &word);
+ hw->eeprom.ops.read(hw, j, &word);
checksum += word;
}
}
@@ -547,14 +902,15 @@ static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
}
/**
- * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
* @hw: pointer to hardware structure
* @checksum_val: calculated checksum
*
* Performs checksum calculation and validates the EEPROM checksum. If the
* caller does not need checksum_val, the value can be NULL.
**/
-s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+ u16 *checksum_val)
{
s32 status;
u16 checksum;
@@ -565,12 +921,12 @@ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
* not continue or we could be in for a very long wait while every
* EEPROM read fails
*/
- status = ixgbe_read_eeprom(hw, 0, &checksum);
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
if (status == 0) {
checksum = ixgbe_calc_eeprom_checksum(hw);
- ixgbe_read_eeprom(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+ hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
/*
* Verify read checksum from EEPROM is the same as
@@ -590,6 +946,33 @@ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
}
/**
+ * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+ if (status == 0) {
+ checksum = ixgbe_calc_eeprom_checksum(hw);
+ status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM,
+ checksum);
+ } else {
+ hw_dbg(hw, "EEPROM read failed\n");
+ }
+
+ return status;
+}
+
+/**
* ixgbe_validate_mac_addr - Validate MAC address
* @mac_addr: pointer to MAC address.
*
@@ -607,58 +990,137 @@ s32 ixgbe_validate_mac_addr(u8 *mac_addr)
status = IXGBE_ERR_INVALID_MAC_ADDR;
/* Reject the zero address */
else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
- mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
+ mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
status = IXGBE_ERR_INVALID_MAC_ADDR;
return status;
}
/**
- * ixgbe_set_rar - Set RX address register
+ * ixgbe_set_rar_generic - Set Rx address register
* @hw: pointer to hardware structure
- * @addr: Address to put into receive address register
* @index: Receive address register to write
- * @vind: Vind to set RAR to
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
* @enable_addr: set flag that address is active
*
* Puts an ethernet address into a receive address register.
**/
-s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
- u32 enable_addr)
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
{
u32 rar_low, rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
- /*
- * HW expects these in little endian so we reverse the byte order from
- * network order (big endian) to little endian
- */
- rar_low = ((u32)addr[0] |
- ((u32)addr[1] << 8) |
- ((u32)addr[2] << 16) |
- ((u32)addr[3] << 24));
+ /* setup VMDq pool selection before this RAR gets enabled */
+ hw->mac.ops.set_vmdq(hw, index, vmdq);
- rar_high = ((u32)addr[4] |
- ((u32)addr[5] << 8) |
- ((vind << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK));
+ /* Make sure we are using a valid rar index range */
+ if (index < rar_entries) {
+ /*
+ * HW expects these in little endian so we reverse the byte
+ * order from network order (big endian) to little endian
+ */
+ rar_low = ((u32)addr[0] |
+ ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) |
+ ((u32)addr[3] << 24));
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+ rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
- if (enable_addr != 0)
- rar_high |= IXGBE_RAH_AV;
+ if (enable_addr != 0)
+ rar_high |= IXGBE_RAH_AV;
- IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
- IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+ } else {
+ hw_dbg(hw, "RAR index %d is out of range.\n", index);
+ }
return 0;
}
/**
- * ixgbe_init_rx_addrs - Initializes receive address filters.
+ * ixgbe_clear_rar_generic - Remove Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ *
+ * Clears an ethernet address from a receive address register.
+ **/
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* Make sure we are using a valid rar index range */
+ if (index < rar_entries) {
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+ } else {
+ hw_dbg(hw, "RAR index %d is out of range.\n", index);
+ }
+
+ /* clear VMDq pool/queue selection for this RAR */
+ hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
+
+ return 0;
+}
+
+/**
+ * ixgbe_enable_rar - Enable Rx address register
+ * @hw: pointer to hardware structure
+ * @index: index into the RAR table
+ *
+ * Enables the select receive address register.
+ **/
+static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high |= IXGBE_RAH_AV;
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+}
+
+/**
+ * ixgbe_disable_rar - Disable Rx address register
+ * @hw: pointer to hardware structure
+ * @index: index into the RAR table
+ *
+ * Disables the select receive address register.
+ **/
+static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= (~IXGBE_RAH_AV);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+}
+
+/**
+ * ixgbe_init_rx_addrs_generic - Initializes receive address filters.
* @hw: pointer to hardware structure
*
* Places the MAC address in receive address register 0 and clears the rest
- * of the receive addresss registers. Clears the multicast table. Assumes
+ * of the receive address registers. Clears the multicast table. Assumes
* the receiver is in reset when the routine is called.
**/
-static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
{
u32 i;
u32 rar_entries = hw->mac.num_rar_entries;
@@ -671,29 +1133,30 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
if (ixgbe_validate_mac_addr(hw->mac.addr) ==
IXGBE_ERR_INVALID_MAC_ADDR) {
/* Get the MAC address from the RAR0 for later reference */
- ixgbe_get_mac_addr(hw, hw->mac.addr);
+ hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
- hw->mac.addr[0], hw->mac.addr[1],
- hw->mac.addr[2]);
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3],
- hw->mac.addr[4], hw->mac.addr[5]);
+ hw->mac.addr[4], hw->mac.addr[5]);
} else {
/* Setup the receive address. */
hw_dbg(hw, "Overriding MAC Address in RAR[0]\n");
hw_dbg(hw, " New MAC Addr =%.2X %.2X %.2X ",
- hw->mac.addr[0], hw->mac.addr[1],
- hw->mac.addr[2]);
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3],
- hw->mac.addr[4], hw->mac.addr[5]);
+ hw->mac.addr[4], hw->mac.addr[5]);
- ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
}
+ hw->addr_ctrl.overflow_promisc = 0;
hw->addr_ctrl.rar_used_count = 1;
/* Zero out the other receive addresses. */
- hw_dbg(hw, "Clearing RAR[1-15]\n");
+ hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1);
for (i = 1; i < rar_entries; i++) {
IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
@@ -708,6 +1171,9 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
for (i = 0; i < hw->mac.mcft_size; i++)
IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+ if (hw->mac.ops.init_uta_tables)
+ hw->mac.ops.init_uta_tables(hw);
+
return 0;
}
@@ -718,7 +1184,7 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
*
* Adds it to unused receive address register or goes into promiscuous mode.
**/
-void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
+static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
{
u32 rar_entries = hw->mac.num_rar_entries;
u32 rar;
@@ -733,7 +1199,7 @@ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
if (hw->addr_ctrl.rar_used_count < rar_entries) {
rar = hw->addr_ctrl.rar_used_count -
hw->addr_ctrl.mc_addr_in_rar_count;
- ixgbe_set_rar(hw, rar, addr, 0, IXGBE_RAH_AV);
+ hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar);
hw->addr_ctrl.rar_used_count++;
} else {
@@ -744,7 +1210,7 @@ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
}
/**
- * ixgbe_update_uc_addr_list - Updates MAC list of secondary addresses
+ * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
* @hw: pointer to hardware structure
* @addr_list: the list of new addresses
* @addr_count: number of addresses
@@ -757,7 +1223,7 @@ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
* Drivers using secondary unicast addresses must set user_set_promisc when
* manually putting the device into promiscuous mode.
**/
-s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
u32 addr_count, ixgbe_mc_addr_itr next)
{
u8 *addr;
@@ -787,7 +1253,7 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
for (i = 0; i < addr_count; i++) {
hw_dbg(hw, " Adding the secondary addresses:\n");
addr = next(hw, &addr_list, &vmdq);
- ixgbe_add_uc_addr(hw, addr);
+ ixgbe_add_uc_addr(hw, addr, vmdq);
}
if (hw->addr_ctrl.overflow_promisc) {
@@ -808,7 +1274,7 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
}
}
- hw_dbg(hw, "ixgbe_update_uc_addr_list Complete\n");
+ hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n");
return 0;
}
@@ -821,7 +1287,7 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
* incoming rx multicast addresses, to determine the bit-vector to check in
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initalization
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
* to mc_filter_type.
**/
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
@@ -829,19 +1295,19 @@ static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
u32 vector = 0;
switch (hw->mac.mc_filter_type) {
- case 0: /* use bits [47:36] of the address */
+ case 0: /* use bits [47:36] of the address */
vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
break;
- case 1: /* use bits [46:35] of the address */
+ case 1: /* use bits [46:35] of the address */
vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
break;
- case 2: /* use bits [45:34] of the address */
+ case 2: /* use bits [45:34] of the address */
vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
break;
- case 3: /* use bits [43:32] of the address */
+ case 3: /* use bits [43:32] of the address */
vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
break;
- default: /* Invalid mc_filter_type */
+ default: /* Invalid mc_filter_type */
hw_dbg(hw, "MC filter type param set incorrectly\n");
break;
}
@@ -896,20 +1362,21 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
{
u32 rar_entries = hw->mac.num_rar_entries;
+ u32 rar;
hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
- mc_addr[0], mc_addr[1], mc_addr[2],
- mc_addr[3], mc_addr[4], mc_addr[5]);
+ mc_addr[0], mc_addr[1], mc_addr[2],
+ mc_addr[3], mc_addr[4], mc_addr[5]);
/*
* Place this multicast address in the RAR if there is room,
* else put it in the MTA
*/
if (hw->addr_ctrl.rar_used_count < rar_entries) {
- ixgbe_set_rar(hw, hw->addr_ctrl.rar_used_count,
- mc_addr, 0, IXGBE_RAH_AV);
- hw_dbg(hw, "Added a multicast address to RAR[%d]\n",
- hw->addr_ctrl.rar_used_count);
+ /* use RAR from the end up for multicast */
+ rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1;
+ hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
+ hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar);
hw->addr_ctrl.rar_used_count++;
hw->addr_ctrl.mc_addr_in_rar_count++;
} else {
@@ -920,19 +1387,19 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
}
/**
- * ixgbe_update_mc_addr_list - Updates MAC list of multicast addresses
+ * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
* @hw: pointer to hardware structure
* @mc_addr_list: the list of new multicast addresses
* @mc_addr_count: number of addresses
* @next: iterator function to walk the multicast address list
*
* The given list replaces any existing list. Clears the MC addrs from receive
- * address registers and the multicast table. Uses unsed receive address
+ * address registers and the multicast table. Uses unused receive address
* registers for the first multicast addresses, and hashes the rest into the
* multicast table.
**/
-s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count, ixgbe_mc_addr_itr next)
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, ixgbe_mc_addr_itr next)
{
u32 i;
u32 rar_entries = hw->mac.num_rar_entries;
@@ -948,7 +1415,8 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
hw->addr_ctrl.mta_in_use = 0;
/* Zero out the other receive addresses. */
- hw_dbg(hw, "Clearing RAR[1-15]\n");
+ hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count,
+ rar_entries - 1);
for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
@@ -968,190 +1436,55 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
/* Enable mta */
if (hw->addr_ctrl.mta_in_use > 0)
IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
- IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
+ IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
- hw_dbg(hw, "ixgbe_update_mc_addr_list Complete\n");
+ hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n");
return 0;
}
/**
- * ixgbe_clear_vfta - Clear VLAN filter table
+ * ixgbe_enable_mc_generic - Enable multicast address in RAR
* @hw: pointer to hardware structure
*
- * Clears the VLAN filer table, and the VMDq index associated with the filter
+ * Enables multicast address in RAR and the use of the multicast hash table.
**/
-static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
{
- u32 offset;
- u32 vlanbyte;
+ u32 i;
+ u32 rar_entries = hw->mac.num_rar_entries;
+ struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
- for (offset = 0; offset < hw->mac.vft_size; offset++)
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+ if (a->mc_addr_in_rar_count > 0)
+ for (i = (rar_entries - a->mc_addr_in_rar_count);
+ i < rar_entries; i++)
+ ixgbe_enable_rar(hw, i);
- for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
- for (offset = 0; offset < hw->mac.vft_size; offset++)
- IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
- 0);
+ if (a->mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
+ hw->mac.mc_filter_type);
return 0;
}
/**
- * ixgbe_set_vfta - Set VLAN filter table
+ * ixgbe_disable_mc_generic - Disable multicast address in RAR
* @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFTA
- * @vlan_on: boolean flag to turn on/off VLAN in VFTA
*
- * Turn on/off specified VLAN in the VLAN filter table.
+ * Disables multicast address in RAR and the use of the multicast hash table.
**/
-s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
{
- u32 VftaIndex;
- u32 BitOffset;
- u32 VftaReg;
- u32 VftaByte;
-
- /* Determine 32-bit word position in array */
- VftaIndex = (vlan >> 5) & 0x7F; /* upper seven bits */
-
- /* Determine the location of the (VMD) queue index */
- VftaByte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
- BitOffset = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
-
- /* Set the nibble for VMD queue index */
- VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex));
- VftaReg &= (~(0x0F << BitOffset));
- VftaReg |= (vind << BitOffset);
- IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex), VftaReg);
-
- /* Determine the location of the bit for this VLAN id */
- BitOffset = vlan & 0x1F; /* lower five bits */
-
- VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTA(VftaIndex));
- if (vlan_on)
- /* Turn on this VLAN id */
- VftaReg |= (1 << BitOffset);
- else
- /* Turn off this VLAN id */
- VftaReg &= ~(1 << BitOffset);
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(VftaIndex), VftaReg);
-
- return 0;
-}
-
-/**
- * ixgbe_setup_fc - Configure flow control settings
- * @hw: pointer to hardware structure
- * @packetbuf_num: packet buffer number (0-7)
- *
- * Configures the flow control settings based on SW configuration.
- * This function is used for 802.3x flow control configuration only.
- **/
-s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
-{
- u32 frctl_reg;
- u32 rmcs_reg;
-
- if (packetbuf_num < 0 || packetbuf_num > 7)
- hw_dbg(hw, "Invalid packet buffer number [%d], expected range "
- "is 0-7\n", packetbuf_num);
-
- frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
-
- rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
- rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
-
- /*
- * 10 gig parts do not have a word in the EEPROM to determine the
- * default flow control setting, so we explicitly set it to full.
- */
- if (hw->fc.type == ixgbe_fc_default)
- hw->fc.type = ixgbe_fc_full;
-
- /*
- * We want to save off the original Flow Control configuration just in
- * case we get disconnected and then reconnected into a different hub
- * or switch with different Flow Control capabilities.
- */
- hw->fc.type = hw->fc.original_type;
-
- /*
- * The possible values of the "flow_control" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames but not
- * send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but we do not
- * support receiving pause frames)
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- * other: Invalid.
- */
- switch (hw->fc.type) {
- case ixgbe_fc_none:
- break;
- case ixgbe_fc_rx_pause:
- /*
- * RX Flow control is enabled,
- * and TX Flow control is disabled.
- */
- frctl_reg |= IXGBE_FCTRL_RFCE;
- break;
- case ixgbe_fc_tx_pause:
- /*
- * TX Flow control is enabled, and RX Flow control is disabled,
- * by a software over-ride.
- */
- rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
- break;
- case ixgbe_fc_full:
- /*
- * Flow control (both RX and TX) is enabled by a software
- * over-ride.
- */
- frctl_reg |= IXGBE_FCTRL_RFCE;
- rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
- break;
- default:
- /* We should never get here. The value should be 0-3. */
- hw_dbg(hw, "Flow control param set incorrectly\n");
- break;
- }
+ u32 i;
+ u32 rar_entries = hw->mac.num_rar_entries;
+ struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
- /* Enable 802.3x based flow control settings. */
- IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
- IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+ if (a->mc_addr_in_rar_count > 0)
+ for (i = (rar_entries - a->mc_addr_in_rar_count);
+ i < rar_entries; i++)
+ ixgbe_disable_rar(hw, i);
- /*
- * Check for invalid software configuration, zeros are completely
- * invalid for all parameters used past this point, and if we enable
- * flow control with zero water marks, we blast flow control packets.
- */
- if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
- hw_dbg(hw, "Flow control structure initialized incorrectly\n");
- return IXGBE_ERR_INVALID_LINK_SETTINGS;
- }
-
- /*
- * We need to set up the Receive Threshold high and low water
- * marks as well as (optionally) enabling the transmission of
- * XON frames.
- */
- if (hw->fc.type & ixgbe_fc_tx_pause) {
- if (hw->fc.send_xon) {
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
- (hw->fc.low_water | IXGBE_FCRTL_XONE));
- } else {
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
- hw->fc.low_water);
- }
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
- (hw->fc.high_water)|IXGBE_FCRTH_FCEN);
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time);
- IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+ if (a->mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
return 0;
}
@@ -1167,13 +1500,24 @@ s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
**/
s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
{
- u32 ctrl;
- s32 i;
+ u32 i;
+ u32 reg_val;
+ u32 number_of_queues;
s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- ctrl |= IXGBE_CTRL_GIO_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ /* Disable the receive unit by stopping each queue */
+ number_of_queues = hw->mac.max_rx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+ if (reg_val & IXGBE_RXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_RXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
+ }
+ }
+
+ reg_val = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ reg_val |= IXGBE_CTRL_GIO_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val);
for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) {
@@ -1188,11 +1532,11 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
/**
- * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
- * @mask: Mask to specify wich semaphore to acquire
+ * @mask: Mask to specify which semaphore to acquire
*
- * Aquires the SWFW semaphore throught the GSSR register for the specified
+ * Acquires the SWFW semaphore thought the GSSR register for the specified
* function (CSR, PHY0, PHY1, EEPROM, Flash)
**/
s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
@@ -1234,9 +1578,9 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
/**
* ixgbe_release_swfw_sync - Release SWFW semaphore
* @hw: pointer to hardware structure
- * @mask: Mask to specify wich semaphore to release
+ * @mask: Mask to specify which semaphore to release
*
- * Releases the SWFW semaphore throught the GSSR register for the specified
+ * Releases the SWFW semaphore thought the GSSR register for the specified
* function (CSR, PHY0, PHY1, EEPROM, Flash)
**/
void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
@@ -1253,45 +1597,3 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
ixgbe_release_eeprom_semaphore(hw);
}
-/**
- * ixgbe_read_analog_reg8 - Reads 8 bit Atlas analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to read
- * @val: read value
- *
- * Performs write operation to analog register specified.
- **/
-s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
-{
- u32 atlas_ctl;
-
- IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
- IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
- IXGBE_WRITE_FLUSH(hw);
- udelay(10);
- atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
- *val = (u8)atlas_ctl;
-
- return 0;
-}
-
-/**
- * ixgbe_write_analog_reg8 - Writes 8 bit Atlas analog register
- * @hw: pointer to hardware structure
- * @reg: atlas register to write
- * @val: value to write
- *
- * Performs write operation to Atlas analog register specified.
- **/
-s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
-{
- u32 atlas_ctl;
-
- atlas_ctl = (reg << 8) | val;
- IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
- IXGBE_WRITE_FLUSH(hw);
- udelay(10);
-
- return 0;
-}
-