aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixp2000/ixp2400_rx.uc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixp2000/ixp2400_rx.uc')
-rw-r--r--drivers/net/ixp2000/ixp2400_rx.uc408
1 files changed, 408 insertions, 0 deletions
diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ixp2000/ixp2400_rx.uc
new file mode 100644
index 00000000000..42a73e357af
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_rx.uc
@@ -0,0 +1,408 @@
+/*
+ * RX ucode for the Intel IXP2400 in POS-PHY mode.
+ * Copyright (C) 2004, 2005 Lennert Buytenhek
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Assumptions made in this code:
+ * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
+ * only one full element list is used. This includes, for example,
+ * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
+ * is not an exhaustive list.)
+ * - The RBUF uses 64-byte mpackets.
+ * - RX descriptors reside in SRAM, and have the following format:
+ * struct rx_desc
+ * {
+ * // to uengine
+ * u32 buf_phys_addr;
+ * u32 buf_length;
+ *
+ * // from uengine
+ * u32 channel;
+ * u32 pkt_length;
+ * };
+ * - Packet data resides in DRAM.
+ * - Packet buffer addresses are 8-byte aligned.
+ * - Scratch ring 0 is rx_pending.
+ * - Scratch ring 1 is rx_done, and has status condition 'full'.
+ * - The host triggers rx_done flush and rx_pending refill on seeing INTA.
+ * - This code is run on all eight threads of the microengine it runs on.
+ *
+ * Local memory is used for per-channel RX state.
+ */
+
+#define RX_THREAD_FREELIST_0 0x0030
+#define RBUF_ELEMENT_DONE 0x0044
+
+#define CHANNEL_FLAGS *l$index0[0]
+#define CHANNEL_FLAG_RECEIVING 1
+#define PACKET_LENGTH *l$index0[1]
+#define PACKET_CHECKSUM *l$index0[2]
+#define BUFFER_HANDLE *l$index0[3]
+#define BUFFER_START *l$index0[4]
+#define BUFFER_LENGTH *l$index0[5]
+
+#define CHANNEL_STATE_SIZE 24 // in bytes
+#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size))
+
+
+ .sig volatile sig1
+ .sig volatile sig2
+ .sig volatile sig3
+
+ .sig mpacket_arrived
+ .reg add_to_rx_freelist
+ .reg read $rsw0, $rsw1
+ .xfer_order $rsw0 $rsw1
+
+ .reg zero
+
+ /*
+ * Initialise add_to_rx_freelist.
+ */
+ .begin
+ .reg temp
+ .reg temp2
+
+ immed[add_to_rx_freelist, RX_THREAD_FREELIST_0]
+ immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))]
+
+ local_csr_rd[ACTIVE_CTX_STS]
+ immed[temp, 0]
+ alu[temp2, temp, and, 0x1f]
+ alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20]
+ alu[temp2, temp, and, 0x80]
+ alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18]
+ .end
+
+ immed[zero, 0]
+
+ /*
+ * Skip context 0 initialisation?
+ */
+ .begin
+ br!=ctx[0, mpacket_receive_loop#]
+ .end
+
+ /*
+ * Initialise local memory.
+ */
+ .begin
+ .reg addr
+ .reg temp
+
+ immed[temp, 0]
+ init_local_mem_loop#:
+ alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT]
+ local_csr_wr[ACTIVE_LM_ADDR_0, addr]
+ nop
+ nop
+ nop
+
+ immed[CHANNEL_FLAGS, 0]
+
+ alu[temp, temp, +, 1]
+ alu[--, temp, and, 0x20]
+ beq[init_local_mem_loop#]
+ .end
+
+ /*
+ * Initialise signal pipeline.
+ */
+ .begin
+ local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
+ .set_sig sig1
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
+ .set_sig sig2
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
+ .set_sig sig3
+ .end
+
+mpacket_receive_loop#:
+ /*
+ * Synchronise and wait for mpacket.
+ */
+ .begin
+ ctx_arb[sig1]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
+
+ msf[fast_wr, --, add_to_rx_freelist, 0]
+ .set_sig mpacket_arrived
+ ctx_arb[mpacket_arrived]
+ .set $rsw0 $rsw1
+ .end
+
+ /*
+ * We halt if we see {inbparerr,parerr,null,soperror}.
+ */
+ .begin
+ alu_shf[--, 0x1b, and, $rsw0, >>8]
+ bne[abort_rswerr#]
+ .end
+
+ /*
+ * Point local memory pointer to this channel's state area.
+ */
+ .begin
+ .reg chanaddr
+
+ alu[chanaddr, $rsw0, and, 0x1f]
+ alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT]
+ local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr]
+ nop
+ nop
+ nop
+ .end
+
+ /*
+ * Check whether we received a SOP mpacket while we were already
+ * working on a packet, or a non-SOP mpacket while there was no
+ * packet pending. (SOP == RECEIVING -> abort) If everything's
+ * okay, update the RECEIVING flag to reflect our new state.
+ */
+ .begin
+ .reg temp
+ .reg eop
+
+ #if CHANNEL_FLAG_RECEIVING != 1
+ #error CHANNEL_FLAG_RECEIVING is not 1
+ #endif
+
+ alu_shf[temp, 1, and, $rsw0, >>15]
+ alu[temp, temp, xor, CHANNEL_FLAGS]
+ alu[--, temp, and, CHANNEL_FLAG_RECEIVING]
+ beq[abort_proterr#]
+
+ alu_shf[eop, 1, and, $rsw0, >>14]
+ alu[CHANNEL_FLAGS, temp, xor, eop]
+ .end
+
+ /*
+ * Copy the mpacket into the right spot, and in case of EOP,
+ * write back the descriptor and pass the packet on.
+ */
+ .begin
+ .reg buffer_offset
+ .reg _packet_length
+ .reg _packet_checksum
+ .reg _buffer_handle
+ .reg _buffer_start
+ .reg _buffer_length
+
+ /*
+ * Determine buffer_offset, _packet_length and
+ * _packet_checksum.
+ */
+ .begin
+ .reg temp
+
+ alu[--, 1, and, $rsw0, >>15]
+ beq[not_sop#]
+
+ immed[PACKET_LENGTH, 0]
+ immed[PACKET_CHECKSUM, 0]
+
+ not_sop#:
+ alu[buffer_offset, --, b, PACKET_LENGTH]
+ alu_shf[temp, 0xff, and, $rsw0, >>16]
+ alu[_packet_length, buffer_offset, +, temp]
+ alu[PACKET_LENGTH, --, b, _packet_length]
+
+ immed[temp, 0xffff]
+ alu[temp, $rsw1, and, temp]
+ alu[_packet_checksum, PACKET_CHECKSUM, +, temp]
+ alu[PACKET_CHECKSUM, --, b, _packet_checksum]
+ .end
+
+ /*
+ * Allocate buffer in case of SOP.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>15]
+ beq[skip_buffer_alloc#]
+
+ .begin
+ .sig zzz
+ .reg read $stemp $stemp2
+ .xfer_order $stemp $stemp2
+
+ rx_nobufs#:
+ scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz]
+ alu[_buffer_handle, --, b, $stemp]
+ beq[rx_nobufs#]
+
+ sram[read, $stemp, _buffer_handle, 0, 2],
+ ctx_swap[zzz]
+ alu[_buffer_start, --, b, $stemp]
+ alu[_buffer_length, --, b, $stemp2]
+ .end
+
+ skip_buffer_alloc#:
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig2]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
+ .end
+
+ /*
+ * Synchronise buffer state.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>15]
+ beq[copy_from_local_mem#]
+
+ alu[BUFFER_HANDLE, --, b, _buffer_handle]
+ alu[BUFFER_START, --, b, _buffer_start]
+ alu[BUFFER_LENGTH, --, b, _buffer_length]
+ br[sync_state_done#]
+
+ copy_from_local_mem#:
+ alu[_buffer_handle, --, b, BUFFER_HANDLE]
+ alu[_buffer_start, --, b, BUFFER_START]
+ alu[_buffer_length, --, b, BUFFER_LENGTH]
+
+ sync_state_done#:
+ .end
+
+#if 0
+ /*
+ * Debug buffer state management.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>14]
+ beq[no_poison#]
+ immed[BUFFER_HANDLE, 0xdead]
+ immed[BUFFER_START, 0xdead]
+ immed[BUFFER_LENGTH, 0xdead]
+ no_poison#:
+
+ immed[temp, 0xdead]
+ alu[--, _buffer_handle, -, temp]
+ beq[state_corrupted#]
+ alu[--, _buffer_start, -, temp]
+ beq[state_corrupted#]
+ alu[--, _buffer_length, -, temp]
+ beq[state_corrupted#]
+ .end
+#endif
+
+ /*
+ * Check buffer length.
+ */
+ .begin
+ alu[--, _buffer_length, -, _packet_length]
+ blo[buffer_overflow#]
+ .end
+
+ /*
+ * Copy the mpacket and give back the RBUF element.
+ */
+ .begin
+ .reg element
+ .reg xfer_size
+ .reg temp
+ .sig copy_sig
+
+ alu_shf[element, 0x7f, and, $rsw0, >>24]
+ alu_shf[xfer_size, 0xff, and, $rsw0, >>16]
+
+ alu[xfer_size, xfer_size, -, 1]
+ alu_shf[xfer_size, 0x10, or, xfer_size, >>3]
+ alu_shf[temp, 0x10, or, xfer_size, <<21]
+ alu_shf[temp, temp, or, element, <<11]
+ alu_shf[--, temp, or, 1, <<18]
+
+ dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8],
+ indirect_ref, sig_done[copy_sig]
+ ctx_arb[copy_sig]
+
+ alu[temp, RBUF_ELEMENT_DONE, or, element, <<16]
+ msf[fast_wr, --, temp, 0]
+ .end
+
+ /*
+ * If EOP, write back the packet descriptor.
+ */
+ .begin
+ .reg write $stemp $stemp2
+ .xfer_order $stemp $stemp2
+ .sig zzz
+
+ alu_shf[--, 1, and, $rsw0, >>14]
+ beq[no_writeback#]
+
+ alu[$stemp, $rsw0, and, 0x1f]
+ alu[$stemp2, --, b, _packet_length]
+ sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz]
+
+ no_writeback#:
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig3]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
+ .end
+
+ /*
+ * If EOP, put the buffer back onto the scratch ring.
+ */
+ .begin
+ .reg write $stemp
+ .sig zzz
+
+ br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#]
+
+ alu_shf[--, 1, and, $rsw0, >>14]
+ beq[mpacket_receive_loop#]
+
+ alu[--, 1, and, $rsw0, >>10]
+ bne[rxerr#]
+
+ alu[$stemp, --, b, _buffer_handle]
+ scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz]
+ cap[fast_wr, 0, XSCALE_INT_A]
+ br[mpacket_receive_loop#]
+
+ rxerr#:
+ alu[$stemp, --, b, _buffer_handle]
+ scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz]
+ br[mpacket_receive_loop#]
+ .end
+ .end
+
+
+abort_rswerr#:
+ halt
+
+abort_proterr#:
+ halt
+
+state_corrupted#:
+ halt
+
+buffer_overflow#:
+ halt
+
+rx_done_ring_overflow#:
+ halt
+
+