aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ks8851_mll.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ks8851_mll.c')
-rw-r--r--drivers/net/ks8851_mll.c1691
1 files changed, 1691 insertions, 0 deletions
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
new file mode 100644
index 00000000000..c146304d8d6
--- /dev/null
+++ b/drivers/net/ks8851_mll.c
@@ -0,0 +1,1691 @@
+/**
+ * drivers/net/ks8851_mll.c
+ * Copyright (c) 2009 Micrel Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/**
+ * Supports:
+ * KS8851 16bit MLL chip from Micrel Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#define DRV_NAME "ks8851_mll"
+
+static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 };
+#define MAX_RECV_FRAMES 32
+#define MAX_BUF_SIZE 2048
+#define TX_BUF_SIZE 2000
+#define RX_BUF_SIZE 2000
+
+#define KS_CCR 0x08
+#define CCR_EEPROM (1 << 9)
+#define CCR_SPI (1 << 8)
+#define CCR_8BIT (1 << 7)
+#define CCR_16BIT (1 << 6)
+#define CCR_32BIT (1 << 5)
+#define CCR_SHARED (1 << 4)
+#define CCR_32PIN (1 << 0)
+
+/* MAC address registers */
+#define KS_MARL 0x10
+#define KS_MARM 0x12
+#define KS_MARH 0x14
+
+#define KS_OBCR 0x20
+#define OBCR_ODS_16MA (1 << 6)
+
+#define KS_EEPCR 0x22
+#define EEPCR_EESA (1 << 4)
+#define EEPCR_EESB (1 << 3)
+#define EEPCR_EEDO (1 << 2)
+#define EEPCR_EESCK (1 << 1)
+#define EEPCR_EECS (1 << 0)
+
+#define KS_MBIR 0x24
+#define MBIR_TXMBF (1 << 12)
+#define MBIR_TXMBFA (1 << 11)
+#define MBIR_RXMBF (1 << 4)
+#define MBIR_RXMBFA (1 << 3)
+
+#define KS_GRR 0x26
+#define GRR_QMU (1 << 1)
+#define GRR_GSR (1 << 0)
+
+#define KS_WFCR 0x2A
+#define WFCR_MPRXE (1 << 7)
+#define WFCR_WF3E (1 << 3)
+#define WFCR_WF2E (1 << 2)
+#define WFCR_WF1E (1 << 1)
+#define WFCR_WF0E (1 << 0)
+
+#define KS_WF0CRC0 0x30
+#define KS_WF0CRC1 0x32
+#define KS_WF0BM0 0x34
+#define KS_WF0BM1 0x36
+#define KS_WF0BM2 0x38
+#define KS_WF0BM3 0x3A
+
+#define KS_WF1CRC0 0x40
+#define KS_WF1CRC1 0x42
+#define KS_WF1BM0 0x44
+#define KS_WF1BM1 0x46
+#define KS_WF1BM2 0x48
+#define KS_WF1BM3 0x4A
+
+#define KS_WF2CRC0 0x50
+#define KS_WF2CRC1 0x52
+#define KS_WF2BM0 0x54
+#define KS_WF2BM1 0x56
+#define KS_WF2BM2 0x58
+#define KS_WF2BM3 0x5A
+
+#define KS_WF3CRC0 0x60
+#define KS_WF3CRC1 0x62
+#define KS_WF3BM0 0x64
+#define KS_WF3BM1 0x66
+#define KS_WF3BM2 0x68
+#define KS_WF3BM3 0x6A
+
+#define KS_TXCR 0x70
+#define TXCR_TCGICMP (1 << 8)
+#define TXCR_TCGUDP (1 << 7)
+#define TXCR_TCGTCP (1 << 6)
+#define TXCR_TCGIP (1 << 5)
+#define TXCR_FTXQ (1 << 4)
+#define TXCR_TXFCE (1 << 3)
+#define TXCR_TXPE (1 << 2)
+#define TXCR_TXCRC (1 << 1)
+#define TXCR_TXE (1 << 0)
+
+#define KS_TXSR 0x72
+#define TXSR_TXLC (1 << 13)
+#define TXSR_TXMC (1 << 12)
+#define TXSR_TXFID_MASK (0x3f << 0)
+#define TXSR_TXFID_SHIFT (0)
+#define TXSR_TXFID_GET(_v) (((_v) >> 0) & 0x3f)
+
+
+#define KS_RXCR1 0x74
+#define RXCR1_FRXQ (1 << 15)
+#define RXCR1_RXUDPFCC (1 << 14)
+#define RXCR1_RXTCPFCC (1 << 13)
+#define RXCR1_RXIPFCC (1 << 12)
+#define RXCR1_RXPAFMA (1 << 11)
+#define RXCR1_RXFCE (1 << 10)
+#define RXCR1_RXEFE (1 << 9)
+#define RXCR1_RXMAFMA (1 << 8)
+#define RXCR1_RXBE (1 << 7)
+#define RXCR1_RXME (1 << 6)
+#define RXCR1_RXUE (1 << 5)
+#define RXCR1_RXAE (1 << 4)
+#define RXCR1_RXINVF (1 << 1)
+#define RXCR1_RXE (1 << 0)
+#define RXCR1_FILTER_MASK (RXCR1_RXINVF | RXCR1_RXAE | \
+ RXCR1_RXMAFMA | RXCR1_RXPAFMA)
+
+#define KS_RXCR2 0x76
+#define RXCR2_SRDBL_MASK (0x7 << 5)
+#define RXCR2_SRDBL_SHIFT (5)
+#define RXCR2_SRDBL_4B (0x0 << 5)
+#define RXCR2_SRDBL_8B (0x1 << 5)
+#define RXCR2_SRDBL_16B (0x2 << 5)
+#define RXCR2_SRDBL_32B (0x3 << 5)
+/* #define RXCR2_SRDBL_FRAME (0x4 << 5) */
+#define RXCR2_IUFFP (1 << 4)
+#define RXCR2_RXIUFCEZ (1 << 3)
+#define RXCR2_UDPLFE (1 << 2)
+#define RXCR2_RXICMPFCC (1 << 1)
+#define RXCR2_RXSAF (1 << 0)
+
+#define KS_TXMIR 0x78
+
+#define KS_RXFHSR 0x7C
+#define RXFSHR_RXFV (1 << 15)
+#define RXFSHR_RXICMPFCS (1 << 13)
+#define RXFSHR_RXIPFCS (1 << 12)
+#define RXFSHR_RXTCPFCS (1 << 11)
+#define RXFSHR_RXUDPFCS (1 << 10)
+#define RXFSHR_RXBF (1 << 7)
+#define RXFSHR_RXMF (1 << 6)
+#define RXFSHR_RXUF (1 << 5)
+#define RXFSHR_RXMR (1 << 4)
+#define RXFSHR_RXFT (1 << 3)
+#define RXFSHR_RXFTL (1 << 2)
+#define RXFSHR_RXRF (1 << 1)
+#define RXFSHR_RXCE (1 << 0)
+#define RXFSHR_ERR (RXFSHR_RXCE | RXFSHR_RXRF |\
+ RXFSHR_RXFTL | RXFSHR_RXMR |\
+ RXFSHR_RXICMPFCS | RXFSHR_RXIPFCS |\
+ RXFSHR_RXTCPFCS)
+#define KS_RXFHBCR 0x7E
+#define RXFHBCR_CNT_MASK 0x0FFF
+
+#define KS_TXQCR 0x80
+#define TXQCR_AETFE (1 << 2)
+#define TXQCR_TXQMAM (1 << 1)
+#define TXQCR_METFE (1 << 0)
+
+#define KS_RXQCR 0x82
+#define RXQCR_RXDTTS (1 << 12)
+#define RXQCR_RXDBCTS (1 << 11)
+#define RXQCR_RXFCTS (1 << 10)
+#define RXQCR_RXIPHTOE (1 << 9)
+#define RXQCR_RXDTTE (1 << 7)
+#define RXQCR_RXDBCTE (1 << 6)
+#define RXQCR_RXFCTE (1 << 5)
+#define RXQCR_ADRFE (1 << 4)
+#define RXQCR_SDA (1 << 3)
+#define RXQCR_RRXEF (1 << 0)
+#define RXQCR_CMD_CNTL (RXQCR_RXFCTE|RXQCR_ADRFE)
+
+#define KS_TXFDPR 0x84
+#define TXFDPR_TXFPAI (1 << 14)
+#define TXFDPR_TXFP_MASK (0x7ff << 0)
+#define TXFDPR_TXFP_SHIFT (0)
+
+#define KS_RXFDPR 0x86
+#define RXFDPR_RXFPAI (1 << 14)
+
+#define KS_RXDTTR 0x8C
+#define KS_RXDBCTR 0x8E
+
+#define KS_IER 0x90
+#define KS_ISR 0x92
+#define IRQ_LCI (1 << 15)
+#define IRQ_TXI (1 << 14)
+#define IRQ_RXI (1 << 13)
+#define IRQ_RXOI (1 << 11)
+#define IRQ_TXPSI (1 << 9)
+#define IRQ_RXPSI (1 << 8)
+#define IRQ_TXSAI (1 << 6)
+#define IRQ_RXWFDI (1 << 5)
+#define IRQ_RXMPDI (1 << 4)
+#define IRQ_LDI (1 << 3)
+#define IRQ_EDI (1 << 2)
+#define IRQ_SPIBEI (1 << 1)
+#define IRQ_DEDI (1 << 0)
+
+#define KS_RXFCTR 0x9C
+#define RXFCTR_THRESHOLD_MASK 0x00FF
+
+#define KS_RXFC 0x9D
+#define RXFCTR_RXFC_MASK (0xff << 8)
+#define RXFCTR_RXFC_SHIFT (8)
+#define RXFCTR_RXFC_GET(_v) (((_v) >> 8) & 0xff)
+#define RXFCTR_RXFCT_MASK (0xff << 0)
+#define RXFCTR_RXFCT_SHIFT (0)
+
+#define KS_TXNTFSR 0x9E
+
+#define KS_MAHTR0 0xA0
+#define KS_MAHTR1 0xA2
+#define KS_MAHTR2 0xA4
+#define KS_MAHTR3 0xA6
+
+#define KS_FCLWR 0xB0
+#define KS_FCHWR 0xB2
+#define KS_FCOWR 0xB4
+
+#define KS_CIDER 0xC0
+#define CIDER_ID 0x8870
+#define CIDER_REV_MASK (0x7 << 1)
+#define CIDER_REV_SHIFT (1)
+#define CIDER_REV_GET(_v) (((_v) >> 1) & 0x7)
+
+#define KS_CGCR 0xC6
+#define KS_IACR 0xC8
+#define IACR_RDEN (1 << 12)
+#define IACR_TSEL_MASK (0x3 << 10)
+#define IACR_TSEL_SHIFT (10)
+#define IACR_TSEL_MIB (0x3 << 10)
+#define IACR_ADDR_MASK (0x1f << 0)
+#define IACR_ADDR_SHIFT (0)
+
+#define KS_IADLR 0xD0
+#define KS_IAHDR 0xD2
+
+#define KS_PMECR 0xD4
+#define PMECR_PME_DELAY (1 << 14)
+#define PMECR_PME_POL (1 << 12)
+#define PMECR_WOL_WAKEUP (1 << 11)
+#define PMECR_WOL_MAGICPKT (1 << 10)
+#define PMECR_WOL_LINKUP (1 << 9)
+#define PMECR_WOL_ENERGY (1 << 8)
+#define PMECR_AUTO_WAKE_EN (1 << 7)
+#define PMECR_WAKEUP_NORMAL (1 << 6)
+#define PMECR_WKEVT_MASK (0xf << 2)
+#define PMECR_WKEVT_SHIFT (2)
+#define PMECR_WKEVT_GET(_v) (((_v) >> 2) & 0xf)
+#define PMECR_WKEVT_ENERGY (0x1 << 2)
+#define PMECR_WKEVT_LINK (0x2 << 2)
+#define PMECR_WKEVT_MAGICPKT (0x4 << 2)
+#define PMECR_WKEVT_FRAME (0x8 << 2)
+#define PMECR_PM_MASK (0x3 << 0)
+#define PMECR_PM_SHIFT (0)
+#define PMECR_PM_NORMAL (0x0 << 0)
+#define PMECR_PM_ENERGY (0x1 << 0)
+#define PMECR_PM_SOFTDOWN (0x2 << 0)
+#define PMECR_PM_POWERSAVE (0x3 << 0)
+
+/* Standard MII PHY data */
+#define KS_P1MBCR 0xE4
+#define P1MBCR_FORCE_FDX (1 << 8)
+
+#define KS_P1MBSR 0xE6
+#define P1MBSR_AN_COMPLETE (1 << 5)
+#define P1MBSR_AN_CAPABLE (1 << 3)
+#define P1MBSR_LINK_UP (1 << 2)
+
+#define KS_PHY1ILR 0xE8
+#define KS_PHY1IHR 0xEA
+#define KS_P1ANAR 0xEC
+#define KS_P1ANLPR 0xEE
+
+#define KS_P1SCLMD 0xF4
+#define P1SCLMD_LEDOFF (1 << 15)
+#define P1SCLMD_TXIDS (1 << 14)
+#define P1SCLMD_RESTARTAN (1 << 13)
+#define P1SCLMD_DISAUTOMDIX (1 << 10)
+#define P1SCLMD_FORCEMDIX (1 << 9)
+#define P1SCLMD_AUTONEGEN (1 << 7)
+#define P1SCLMD_FORCE100 (1 << 6)
+#define P1SCLMD_FORCEFDX (1 << 5)
+#define P1SCLMD_ADV_FLOW (1 << 4)
+#define P1SCLMD_ADV_100BT_FDX (1 << 3)
+#define P1SCLMD_ADV_100BT_HDX (1 << 2)
+#define P1SCLMD_ADV_10BT_FDX (1 << 1)
+#define P1SCLMD_ADV_10BT_HDX (1 << 0)
+
+#define KS_P1CR 0xF6
+#define P1CR_HP_MDIX (1 << 15)
+#define P1CR_REV_POL (1 << 13)
+#define P1CR_OP_100M (1 << 10)
+#define P1CR_OP_FDX (1 << 9)
+#define P1CR_OP_MDI (1 << 7)
+#define P1CR_AN_DONE (1 << 6)
+#define P1CR_LINK_GOOD (1 << 5)
+#define P1CR_PNTR_FLOW (1 << 4)
+#define P1CR_PNTR_100BT_FDX (1 << 3)
+#define P1CR_PNTR_100BT_HDX (1 << 2)
+#define P1CR_PNTR_10BT_FDX (1 << 1)
+#define P1CR_PNTR_10BT_HDX (1 << 0)
+
+/* TX Frame control */
+
+#define TXFR_TXIC (1 << 15)
+#define TXFR_TXFID_MASK (0x3f << 0)
+#define TXFR_TXFID_SHIFT (0)
+
+#define KS_P1SR 0xF8
+#define P1SR_HP_MDIX (1 << 15)
+#define P1SR_REV_POL (1 << 13)
+#define P1SR_OP_100M (1 << 10)
+#define P1SR_OP_FDX (1 << 9)
+#define P1SR_OP_MDI (1 << 7)
+#define P1SR_AN_DONE (1 << 6)
+#define P1SR_LINK_GOOD (1 << 5)
+#define P1SR_PNTR_FLOW (1 << 4)
+#define P1SR_PNTR_100BT_FDX (1 << 3)
+#define P1SR_PNTR_100BT_HDX (1 << 2)
+#define P1SR_PNTR_10BT_FDX (1 << 1)
+#define P1SR_PNTR_10BT_HDX (1 << 0)
+
+#define ENUM_BUS_NONE 0
+#define ENUM_BUS_8BIT 1
+#define ENUM_BUS_16BIT 2
+#define ENUM_BUS_32BIT 3
+
+#define MAX_MCAST_LST 32
+#define HW_MCAST_SIZE 8
+#define MAC_ADDR_LEN 6
+
+/**
+ * union ks_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks_tx_hdr {
+ u8 txb[4];
+ __le16 txw[2];
+};
+
+/**
+ * struct ks_net - KS8851 driver private data
+ * @net_device : The network device we're bound to
+ * @hw_addr : start address of data register.
+ * @hw_addr_cmd : start address of command register.
+ * @txh : temporaly buffer to save status/length.
+ * @lock : Lock to ensure that the device is not accessed when busy.
+ * @pdev : Pointer to platform device.
+ * @mii : The MII state information for the mii calls.
+ * @frame_head_info : frame header information for multi-pkt rx.
+ * @statelock : Lock on this structure for tx list.
+ * @msg_enable : The message flags controlling driver output (see ethtool).
+ * @frame_cnt : number of frames received.
+ * @bus_width : i/o bus width.
+ * @irq : irq number assigned to this device.
+ * @rc_rxqcr : Cached copy of KS_RXQCR.
+ * @rc_txcr : Cached copy of KS_TXCR.
+ * @rc_ier : Cached copy of KS_IER.
+ * @sharedbus : Multipex(addr and data bus) mode indicator.
+ * @cmd_reg_cache : command register cached.
+ * @cmd_reg_cache_int : command register cached. Used in the irq handler.
+ * @promiscuous : promiscuous mode indicator.
+ * @all_mcast : mutlicast indicator.
+ * @mcast_lst_size : size of multicast list.
+ * @mcast_lst : multicast list.
+ * @mcast_bits : multicast enabed.
+ * @mac_addr : MAC address assigned to this device.
+ * @fid : frame id.
+ * @extra_byte : number of extra byte prepended rx pkt.
+ * @enabled : indicator this device works.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not accessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ */
+
+/* Receive multiplex framer header info */
+struct type_frame_head {
+ u16 sts; /* Frame status */
+ u16 len; /* Byte count */
+};
+
+struct ks_net {
+ struct net_device *netdev;
+ void __iomem *hw_addr;
+ void __iomem *hw_addr_cmd;
+ union ks_tx_hdr txh ____cacheline_aligned;
+ struct mutex lock; /* spinlock to be interrupt safe */
+ struct platform_device *pdev;
+ struct mii_if_info mii;
+ struct type_frame_head *frame_head_info;
+ spinlock_t statelock;
+ u32 msg_enable;
+ u32 frame_cnt;
+ int bus_width;
+ int irq;
+
+ u16 rc_rxqcr;
+ u16 rc_txcr;
+ u16 rc_ier;
+ u16 sharedbus;
+ u16 cmd_reg_cache;
+ u16 cmd_reg_cache_int;
+ u16 promiscuous;
+ u16 all_mcast;
+ u16 mcast_lst_size;
+ u8 mcast_lst[MAX_MCAST_LST][MAC_ADDR_LEN];
+ u8 mcast_bits[HW_MCAST_SIZE];
+ u8 mac_addr[6];
+ u8 fid;
+ u8 extra_byte;
+ u8 enabled;
+};
+
+static int msg_enable;
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg)
+
+#define BE3 0x8000 /* Byte Enable 3 */
+#define BE2 0x4000 /* Byte Enable 2 */
+#define BE1 0x2000 /* Byte Enable 1 */
+#define BE0 0x1000 /* Byte Enable 0 */
+
+/**
+ * register read/write calls.
+ *
+ * All these calls issue transactions to access the chip's registers. They
+ * all require that the necessary lock is held to prevent accesses when the
+ * chip is busy transfering packet data (RX/TX FIFO accesses).
+ */
+
+/**
+ * ks_rdreg8 - read 8 bit register from device
+ * @ks : The chip information
+ * @offset: The register address
+ *
+ * Read a 8bit register from the chip, returning the result
+ */
+static u8 ks_rdreg8(struct ks_net *ks, int offset)
+{
+ u16 data;
+ u8 shift_bit = offset & 0x03;
+ u8 shift_data = (offset & 1) << 3;
+ ks->cmd_reg_cache = (u16) offset | (u16)(BE0 << shift_bit);
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+ data = ioread16(ks->hw_addr);
+ return (u8)(data >> shift_data);
+}
+
+/**
+ * ks_rdreg16 - read 16 bit register from device
+ * @ks : The chip information
+ * @offset: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+ */
+
+static u16 ks_rdreg16(struct ks_net *ks, int offset)
+{
+ ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+ return ioread16(ks->hw_addr);
+}
+
+/**
+ * ks_wrreg8 - write 8bit register value to chip
+ * @ks: The chip information
+ * @offset: The register address
+ * @value: The value to write
+ *
+ */
+static void ks_wrreg8(struct ks_net *ks, int offset, u8 value)
+{
+ u8 shift_bit = (offset & 0x03);
+ u16 value_write = (u16)(value << ((offset & 1) << 3));
+ ks->cmd_reg_cache = (u16)offset | (BE0 << shift_bit);
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+ iowrite16(value_write, ks->hw_addr);
+}
+
+/**
+ * ks_wrreg16 - write 16bit register value to chip
+ * @ks: The chip information
+ * @offset: The register address
+ * @value: The value to write
+ *
+ */
+
+static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
+{
+ ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+ iowrite16(value, ks->hw_addr);
+}
+
+/**
+ * ks_inblk - read a block of data from QMU. This is called after sudo DMA mode enabled.
+ * @ks: The chip state
+ * @wptr: buffer address to save data
+ * @len: length in byte to read
+ *
+ */
+static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len)
+{
+ len >>= 1;
+ while (len--)
+ *wptr++ = (u16)ioread16(ks->hw_addr);
+}
+
+/**
+ * ks_outblk - write data to QMU. This is called after sudo DMA mode enabled.
+ * @ks: The chip information
+ * @wptr: buffer address
+ * @len: length in byte to write
+ *
+ */
+static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
+{
+ len >>= 1;
+ while (len--)
+ iowrite16(*wptr++, ks->hw_addr);
+}
+
+static void ks_disable_int(struct ks_net *ks)
+{
+ ks_wrreg16(ks, KS_IER, 0x0000);
+} /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+ ks_wrreg16(ks, KS_IER, ks->rc_ier);
+} /* ks_enable_int */
+
+/**
+ * ks_tx_fifo_space - return the available hardware buffer size.
+ * @ks: The chip information
+ *
+ */
+static inline u16 ks_tx_fifo_space(struct ks_net *ks)
+{
+ return ks_rdreg16(ks, KS_TXMIR) & 0x1fff;
+}
+
+/**
+ * ks_save_cmd_reg - save the command register from the cache.
+ * @ks: The chip information
+ *
+ */
+static inline void ks_save_cmd_reg(struct ks_net *ks)
+{
+ /*ks8851 MLL has a bug to read back the command register.
+ * So rely on software to save the content of command register.
+ */
+ ks->cmd_reg_cache_int = ks->cmd_reg_cache;
+}
+
+/**
+ * ks_restore_cmd_reg - restore the command register from the cache and
+ * write to hardware register.
+ * @ks: The chip information
+ *
+ */
+static inline void ks_restore_cmd_reg(struct ks_net *ks)
+{
+ ks->cmd_reg_cache = ks->cmd_reg_cache_int;
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+}
+
+/**
+ * ks_set_powermode - set power mode of the device
+ * @ks: The chip information
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks_set_powermode(struct ks_net *ks, unsigned pwrmode)
+{
+ unsigned pmecr;
+
+ if (netif_msg_hw(ks))
+ ks_dbg(ks, "setting power mode %d\n", pwrmode);
+
+ ks_rdreg16(ks, KS_GRR);
+ pmecr = ks_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_PM_MASK;
+ pmecr |= pwrmode;
+
+ ks_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks_read_config - read chip configuration of bus width.
+ * @ks: The chip information
+ *
+ */
+static void ks_read_config(struct ks_net *ks)
+{
+ u16 reg_data = 0;
+
+ /* Regardless of bus width, 8 bit read should always work.*/
+ reg_data = ks_rdreg8(ks, KS_CCR) & 0x00FF;
+ reg_data |= ks_rdreg8(ks, KS_CCR+1) << 8;
+
+ /* addr/data bus are multiplexed */
+ ks->sharedbus = (reg_data & CCR_SHARED) == CCR_SHARED;
+
+ /* There are garbage data when reading data from QMU,
+ depending on bus-width.
+ */
+
+ if (reg_data & CCR_8BIT) {
+ ks->bus_width = ENUM_BUS_8BIT;
+ ks->extra_byte = 1;
+ } else if (reg_data & CCR_16BIT) {
+ ks->bus_width = ENUM_BUS_16BIT;
+ ks->extra_byte = 2;
+ } else {
+ ks->bus_width = ENUM_BUS_32BIT;
+ ks->extra_byte = 4;
+ }
+}
+
+/**
+ * ks_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks_soft_reset(struct ks_net *ks, unsigned op)
+{
+ /* Disable interrupt first */
+ ks_wrreg16(ks, KS_IER, 0x0000);
+ ks_wrreg16(ks, KS_GRR, op);
+ mdelay(10); /* wait a short time to effect reset */
+ ks_wrreg16(ks, KS_GRR, 0);
+ mdelay(1); /* wait for condition to clear */
+}
+
+
+void ks_enable_qmu(struct ks_net *ks)
+{
+ u16 w;
+
+ w = ks_rdreg16(ks, KS_TXCR);
+ /* Enables QMU Transmit (TXCR). */
+ ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+ /*
+ * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+ * Enable
+ */
+
+ w = ks_rdreg16(ks, KS_RXQCR);
+ ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+ /* Enables QMU Receive (RXCR1). */
+ w = ks_rdreg16(ks, KS_RXCR1);
+ ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+ ks->enabled = true;
+} /* ks_enable_qmu */
+
+static void ks_disable_qmu(struct ks_net *ks)
+{
+ u16 w;
+
+ w = ks_rdreg16(ks, KS_TXCR);
+
+ /* Disables QMU Transmit (TXCR). */
+ w &= ~TXCR_TXE;
+ ks_wrreg16(ks, KS_TXCR, w);
+
+ /* Disables QMU Receive (RXCR1). */
+ w = ks_rdreg16(ks, KS_RXCR1);
+ w &= ~RXCR1_RXE ;
+ ks_wrreg16(ks, KS_RXCR1, w);
+
+ ks->enabled = false;
+
+} /* ks_disable_qmu */
+
+/**
+ * ks_read_qmu - read 1 pkt data from the QMU.
+ * @ks: The chip information
+ * @buf: buffer address to save 1 pkt
+ * @len: Pkt length
+ * Here is the sequence to read 1 pkt:
+ * 1. set sudo DMA mode
+ * 2. read prepend data
+ * 3. read pkt data
+ * 4. reset sudo DMA Mode
+ */
+static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len)
+{
+ u32 r = ks->extra_byte & 0x1 ;
+ u32 w = ks->extra_byte - r;
+
+ /* 1. set sudo DMA mode */
+ ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
+ ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+
+ /* 2. read prepend data */
+ /**
+ * read 4 + extra bytes and discard them.
+ * extra bytes for dummy, 2 for status, 2 for len
+ */
+
+ /* use likely(r) for 8 bit access for performance */
+ if (unlikely(r))
+ ioread8(ks->hw_addr);
+ ks_inblk(ks, buf, w + 2 + 2);
+
+ /* 3. read pkt data */
+ ks_inblk(ks, buf, ALIGN(len, 4));
+
+ /* 4. reset sudo DMA Mode */
+ ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+}
+
+/**
+ * ks_rcv - read multiple pkts data from the QMU.
+ * @ks: The chip information
+ * @netdev: The network device being opened.
+ *
+ * Read all of header information before reading pkt content.
+ * It is not allowed only port of pkts in QMU after issuing
+ * interrupt ack.
+ */
+static void ks_rcv(struct ks_net *ks, struct net_device *netdev)
+{
+ u32 i;
+ struct type_frame_head *frame_hdr = ks->frame_head_info;
+ struct sk_buff *skb;
+
+ ks->frame_cnt = ks_rdreg16(ks, KS_RXFCTR) >> 8;
+
+ /* read all header information */
+ for (i = 0; i < ks->frame_cnt; i++) {
+ /* Checking Received packet status */
+ frame_hdr->sts = ks_rdreg16(ks, KS_RXFHSR);
+ /* Get packet len from hardware */
+ frame_hdr->len = ks_rdreg16(ks, KS_RXFHBCR);
+ frame_hdr++;
+ }
+
+ frame_hdr = ks->frame_head_info;
+ while (ks->frame_cnt--) {
+ skb = dev_alloc_skb(frame_hdr->len + 16);
+ if (likely(skb && (frame_hdr->sts & RXFSHR_RXFV) &&
+ (frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
+ skb_reserve(skb, 2);
+ /* read data block including CRC 4 bytes */
+ ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len);
+ skb_put(skb, frame_hdr->len);
+ skb->dev = netdev;
+ skb->protocol = eth_type_trans(skb, netdev);
+ netif_rx(skb);
+ } else {
+ printk(KERN_ERR "%s: err:skb alloc\n", __func__);
+ ks_wrreg16(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF));
+ if (skb)
+ dev_kfree_skb_irq(skb);
+ }
+ frame_hdr++;
+ }
+}
+
+/**
+ * ks_update_link_status - link status update.
+ * @netdev: The network device being opened.
+ * @ks: The chip information
+ *
+ */
+
+static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks)
+{
+ /* check the status of the link */
+ u32 link_up_status;
+ if (ks_rdreg16(ks, KS_P1SR) & P1SR_LINK_GOOD) {
+ netif_carrier_on(netdev);
+ link_up_status = true;
+ } else {
+ netif_carrier_off(netdev);
+ link_up_status = false;
+ }
+ if (netif_msg_link(ks))
+ ks_dbg(ks, "%s: %s\n",
+ __func__, link_up_status ? "UP" : "DOWN");
+}
+
+/**
+ * ks_irq - device interrupt handler
+ * @irq: Interrupt number passed from the IRQ hnalder.
+ * @pw: The private word passed to register_irq(), our struct ks_net.
+ *
+ * This is the handler invoked to find out what happened
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+
+static irqreturn_t ks_irq(int irq, void *pw)
+{
+ struct ks_net *ks = pw;
+ struct net_device *netdev = ks->netdev;
+ u16 status;
+
+ /*this should be the first in IRQ handler */
+ ks_save_cmd_reg(ks);
+
+ status = ks_rdreg16(ks, KS_ISR);
+ if (unlikely(!status)) {
+ ks_restore_cmd_reg(ks);
+ return IRQ_NONE;
+ }
+
+ ks_wrreg16(ks, KS_ISR, status);
+
+ if (likely(status & IRQ_RXI))
+ ks_rcv(ks, netdev);
+
+ if (unlikely(status & IRQ_LCI))
+ ks_update_link_status(netdev, ks);
+
+ if (unlikely(status & IRQ_TXI))
+ netif_wake_queue(netdev);
+
+ if (unlikely(status & IRQ_LDI)) {
+
+ u16 pmecr = ks_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_WKEVT_MASK;
+ ks_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+ }
+
+ /* this should be the last in IRQ handler*/
+ ks_restore_cmd_reg(ks);
+ return IRQ_HANDLED;
+}
+
+
+/**
+ * ks_net_open - open network device
+ * @netdev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks_net_open(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ int err;
+
+#define KS_INT_FLAGS (IRQF_DISABLED|IRQF_TRIGGER_LOW)
+ /* lock the card, even if we may not actually do anything
+ * else at the moment.
+ */
+
+ if (netif_msg_ifup(ks))
+ ks_dbg(ks, "%s - entry\n", __func__);
+
+ /* reset the HW */
+ err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
+
+ if (err) {
+ printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
+ ks->irq, err);
+ return err;
+ }
+
+ /* wake up powermode to normal mode */
+ ks_set_powermode(ks, PMECR_PM_NORMAL);
+ mdelay(1); /* wait for normal mode to take effect */
+
+ ks_wrreg16(ks, KS_ISR, 0xffff);
+ ks_enable_int(ks);
+ ks_enable_qmu(ks);
+ netif_start_queue(ks->netdev);
+
+ if (netif_msg_ifup(ks))
+ ks_dbg(ks, "network device %s up\n", netdev->name);
+
+ return 0;
+}
+
+/**
+ * ks_net_stop - close network device
+ * @netdev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks_net_stop(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+
+ if (netif_msg_ifdown(ks))
+ ks_info(ks, "%s: shutting down\n", netdev->name);
+
+ netif_stop_queue(netdev);
+
+ mutex_lock(&ks->lock);
+
+ /* turn off the IRQs and ack any outstanding */
+ ks_wrreg16(ks, KS_IER, 0x0000);
+ ks_wrreg16(ks, KS_ISR, 0xffff);
+
+ /* shutdown RX/TX QMU */
+ ks_disable_qmu(ks);
+
+ /* set powermode to soft power down to save power */
+ ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
+ free_irq(ks->irq, netdev);
+ mutex_unlock(&ks->lock);
+ return 0;
+}
+
+
+/**
+ * ks_write_qmu - write 1 pkt data to the QMU.
+ * @ks: The chip information
+ * @pdata: buffer address to save 1 pkt
+ * @len: Pkt length in byte
+ * Here is the sequence to write 1 pkt:
+ * 1. set sudo DMA mode
+ * 2. write status/length
+ * 3. write pkt data
+ * 4. reset sudo DMA Mode
+ * 5. reset sudo DMA mode
+ * 6. Wait until pkt is out
+ */
+static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
+{
+ /* start header at txb[0] to align txw entries */
+ ks->txh.txw[0] = 0;
+ ks->txh.txw[1] = cpu_to_le16(len);
+
+ /* 1. set sudo-DMA mode */
+ ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+ /* 2. write status/lenth info */
+ ks_outblk(ks, ks->txh.txw, 4);
+ /* 3. write pkt data */
+ ks_outblk(ks, (u16 *)pdata, ALIGN(len, 4));
+ /* 4. reset sudo-DMA mode */
+ ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+ /* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */
+ ks_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+ /* 6. wait until TXQCR_METFE is auto-cleared */
+ while (ks_rdreg16(ks, KS_TXQCR) & TXQCR_METFE)
+ ;
+}
+
+/**
+ * ks_start_xmit - transmit packet
+ * @skb : The buffer to transmit
+ * @netdev : The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb.
+ * spin_lock_irqsave is required because tx and rx should be mutual exclusive.
+ * So while tx is in-progress, prevent IRQ interrupt from happenning.
+ */
+static int ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ int retv = NETDEV_TX_OK;
+ struct ks_net *ks = netdev_priv(netdev);
+
+ disable_irq(netdev->irq);
+ ks_disable_int(ks);
+ spin_lock(&ks->statelock);
+
+ /* Extra space are required:
+ * 4 byte for alignment, 4 for status/length, 4 for CRC
+ */
+
+ if (likely(ks_tx_fifo_space(ks) >= skb->len + 12)) {
+ ks_write_qmu(ks, skb->data, skb->len);
+ dev_kfree_skb(skb);
+ } else
+ retv = NETDEV_TX_BUSY;
+ spin_unlock(&ks->statelock);
+ ks_enable_int(ks);
+ enable_irq(netdev->irq);
+ return retv;
+}
+
+/**
+ * ks_start_rx - ready to serve pkts
+ * @ks : The chip information
+ *
+ */
+static void ks_start_rx(struct ks_net *ks)
+{
+ u16 cntl;
+
+ /* Enables QMU Receive (RXCR1). */
+ cntl = ks_rdreg16(ks, KS_RXCR1);
+ cntl |= RXCR1_RXE ;
+ ks_wrreg16(ks, KS_RXCR1, cntl);
+} /* ks_start_rx */
+
+/**
+ * ks_stop_rx - stop to serve pkts
+ * @ks : The chip information
+ *
+ */
+static void ks_stop_rx(struct ks_net *ks)
+{
+ u16 cntl;
+
+ /* Disables QMU Receive (RXCR1). */
+ cntl = ks_rdreg16(ks, KS_RXCR1);
+ cntl &= ~RXCR1_RXE ;
+ ks_wrreg16(ks, KS_RXCR1, cntl);
+
+} /* ks_stop_rx */
+
+static unsigned long const ethernet_polynomial = 0x04c11db7U;
+
+static unsigned long ether_gen_crc(int length, u8 *data)
+{
+ long crc = -1;
+ while (--length >= 0) {
+ u8 current_octet = *data++;
+ int bit;
+
+ for (bit = 0; bit < 8; bit++, current_octet >>= 1) {
+ crc = (crc << 1) ^
+ ((crc < 0) ^ (current_octet & 1) ?
+ ethernet_polynomial : 0);
+ }
+ }
+ return (unsigned long)crc;
+} /* ether_gen_crc */
+
+/**
+* ks_set_grpaddr - set multicast information
+* @ks : The chip information
+*/
+
+static void ks_set_grpaddr(struct ks_net *ks)
+{
+ u8 i;
+ u32 index, position, value;
+
+ memset(ks->mcast_bits, 0, sizeof(u8) * HW_MCAST_SIZE);
+
+ for (i = 0; i < ks->mcast_lst_size; i++) {
+ position = (ether_gen_crc(6, ks->mcast_lst[i]) >> 26) & 0x3f;
+ index = position >> 3;
+ value = 1 << (position & 7);
+ ks->mcast_bits[index] |= (u8)value;
+ }
+
+ for (i = 0; i < HW_MCAST_SIZE; i++) {
+ if (i & 1) {
+ ks_wrreg16(ks, (u16)((KS_MAHTR0 + i) & ~1),
+ (ks->mcast_bits[i] << 8) |
+ ks->mcast_bits[i - 1]);
+ }
+ }
+} /* ks_set_grpaddr */
+
+/*
+* ks_clear_mcast - clear multicast information
+*
+* @ks : The chip information
+* This routine removes all mcast addresses set in the hardware.
+*/
+
+static void ks_clear_mcast(struct ks_net *ks)
+{
+ u16 i, mcast_size;
+ for (i = 0; i < HW_MCAST_SIZE; i++)
+ ks->mcast_bits[i] = 0;
+
+ mcast_size = HW_MCAST_SIZE >> 2;
+ for (i = 0; i < mcast_size; i++)
+ ks_wrreg16(ks, KS_MAHTR0 + (2*i), 0);
+}
+
+static void ks_set_promis(struct ks_net *ks, u16 promiscuous_mode)
+{
+ u16 cntl;
+ ks->promiscuous = promiscuous_mode;
+ ks_stop_rx(ks); /* Stop receiving for reconfiguration */
+ cntl = ks_rdreg16(ks, KS_RXCR1);
+
+ cntl &= ~RXCR1_FILTER_MASK;
+ if (promiscuous_mode)
+ /* Enable Promiscuous mode */
+ cntl |= RXCR1_RXAE | RXCR1_RXINVF;
+ else
+ /* Disable Promiscuous mode (default normal mode) */
+ cntl |= RXCR1_RXPAFMA;
+
+ ks_wrreg16(ks, KS_RXCR1, cntl);
+
+ if (ks->enabled)
+ ks_start_rx(ks);
+
+} /* ks_set_promis */
+
+static void ks_set_mcast(struct ks_net *ks, u16 mcast)
+{
+ u16 cntl;
+
+ ks->all_mcast = mcast;
+ ks_stop_rx(ks); /* Stop receiving for reconfiguration */
+ cntl = ks_rdreg16(ks, KS_RXCR1);
+ cntl &= ~RXCR1_FILTER_MASK;
+ if (mcast)
+ /* Enable "Perfect with Multicast address passed mode" */
+ cntl |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA);
+ else
+ /**
+ * Disable "Perfect with Multicast address passed
+ * mode" (normal mode).
+ */
+ cntl |= RXCR1_RXPAFMA;
+
+ ks_wrreg16(ks, KS_RXCR1, cntl);
+
+ if (ks->enabled)
+ ks_start_rx(ks);
+} /* ks_set_mcast */
+
+static void ks_set_rx_mode(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ struct dev_mc_list *ptr;
+
+ /* Turn on/off promiscuous mode. */
+ if ((netdev->flags & IFF_PROMISC) == IFF_PROMISC)
+ ks_set_promis(ks,
+ (u16)((netdev->flags & IFF_PROMISC) == IFF_PROMISC));
+ /* Turn on/off all mcast mode. */
+ else if ((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI)
+ ks_set_mcast(ks,
+ (u16)((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI));
+ else
+ ks_set_promis(ks, false);
+
+ if ((netdev->flags & IFF_MULTICAST) && netdev->mc_count) {
+ if (netdev->mc_count <= MAX_MCAST_LST) {
+ int i = 0;
+ for (ptr = netdev->mc_list; ptr; ptr = ptr->next) {
+ if (!(*ptr->dmi_addr & 1))
+ continue;
+ if (i >= MAX_MCAST_LST)
+ break;
+ memcpy(ks->mcast_lst[i++], ptr->dmi_addr,
+ MAC_ADDR_LEN);
+ }
+ ks->mcast_lst_size = (u8)i;
+ ks_set_grpaddr(ks);
+ } else {
+ /**
+ * List too big to support so
+ * turn on all mcast mode.
+ */
+ ks->mcast_lst_size = MAX_MCAST_LST;
+ ks_set_mcast(ks, true);
+ }
+ } else {
+ ks->mcast_lst_size = 0;
+ ks_clear_mcast(ks);
+ }
+} /* ks_set_rx_mode */
+
+static void ks_set_mac(struct ks_net *ks, u8 *data)
+{
+ u16 *pw = (u16 *)data;
+ u16 w, u;
+
+ ks_stop_rx(ks); /* Stop receiving for reconfiguration */
+
+ u = *pw++;
+ w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+ ks_wrreg16(ks, KS_MARH, w);
+
+ u = *pw++;
+ w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+ ks_wrreg16(ks, KS_MARM, w);
+
+ u = *pw;
+ w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+ ks_wrreg16(ks, KS_MARL, w);
+
+ memcpy(ks->mac_addr, data, 6);
+
+ if (ks->enabled)
+ ks_start_rx(ks);
+}
+
+static int ks_set_mac_address(struct net_device *netdev, void *paddr)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ struct sockaddr *addr = paddr;
+ u8 *da;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+ da = (u8 *)netdev->dev_addr;
+
+ ks_set_mac(ks, da);
+ return 0;
+}
+
+static int ks_net_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+
+ if (!netif_running(netdev))
+ return -EINVAL;
+
+ return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks_netdev_ops = {
+ .ndo_open = ks_net_open,
+ .ndo_stop = ks_net_stop,
+ .ndo_do_ioctl = ks_net_ioctl,
+ .ndo_start_xmit = ks_start_xmit,
+ .ndo_set_mac_address = ks_set_mac_address,
+ .ndo_set_rx_mode = ks_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *di)
+{
+ strlcpy(di->driver, DRV_NAME, sizeof(di->driver));
+ strlcpy(di->version, "1.00", sizeof(di->version));
+ strlcpy(di->bus_info, dev_name(netdev->dev.parent),
+ sizeof(di->bus_info));
+}
+
+static u32 ks_get_msglevel(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return ks->msg_enable;
+}
+
+static void ks_set_msglevel(struct net_device *netdev, u32 to)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ ks->msg_enable = to;
+}
+
+static int ks_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return mii_ethtool_gset(&ks->mii, cmd);
+}
+
+static int ks_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return mii_ethtool_sset(&ks->mii, cmd);
+}
+
+static u32 ks_get_link(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return mii_link_ok(&ks->mii);
+}
+
+static int ks_nway_reset(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return mii_nway_restart(&ks->mii);
+}
+
+static const struct ethtool_ops ks_ethtool_ops = {
+ .get_drvinfo = ks_get_drvinfo,
+ .get_msglevel = ks_get_msglevel,
+ .set_msglevel = ks_set_msglevel,
+ .get_settings = ks_get_settings,
+ .set_settings = ks_set_settings,
+ .get_link = ks_get_link,
+ .nway_reset = ks_nway_reset,
+};
+
+/* MII interface controls */
+
+/**
+ * ks_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks_phy_reg(int reg)
+{
+ switch (reg) {
+ case MII_BMCR:
+ return KS_P1MBCR;
+ case MII_BMSR:
+ return KS_P1MBSR;
+ case MII_PHYSID1:
+ return KS_PHY1ILR;
+ case MII_PHYSID2:
+ return KS_PHY1IHR;
+ case MII_ADVERTISE:
+ return KS_P1ANAR;
+ case MII_LPA:
+ return KS_P1ANLPR;
+ }
+
+ return 0x0;
+}
+
+/**
+ * ks_phy_read - MII interface PHY register read.
+ * @netdev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existant values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks_phy_read(struct net_device *netdev, int phy_addr, int reg)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ int ksreg;
+ int result;
+
+ ksreg = ks_phy_reg(reg);
+ if (!ksreg)
+ return 0x0; /* no error return allowed, so use zero */
+
+ mutex_lock(&ks->lock);
+ result = ks_rdreg16(ks, ksreg);
+ mutex_unlock(&ks->lock);
+
+ return result;
+}
+
+static void ks_phy_write(struct net_device *netdev,
+ int phy, int reg, int value)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ int ksreg;
+
+ ksreg = ks_phy_reg(reg);
+ if (ksreg) {
+ mutex_lock(&ks->lock);
+ ks_wrreg16(ks, ksreg, value);
+ mutex_unlock(&ks->lock);
+ }
+}
+
+/**
+ * ks_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks_read_selftest(struct ks_net *ks)
+{
+ unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+ int ret = 0;
+ unsigned rd;
+
+ rd = ks_rdreg16(ks, KS_MBIR);
+
+ if ((rd & both_done) != both_done) {
+ ks_warn(ks, "Memory selftest not finished\n");
+ return 0;
+ }
+
+ if (rd & MBIR_TXMBFA) {
+ ks_err(ks, "TX memory selftest fails\n");
+ ret |= 1;
+ }
+
+ if (rd & MBIR_RXMBFA) {
+ ks_err(ks, "RX memory selftest fails\n");
+ ret |= 2;
+ }
+
+ ks_info(ks, "the selftest passes\n");
+ return ret;
+}
+
+static void ks_setup(struct ks_net *ks)
+{
+ u16 w;
+
+ /**
+ * Configure QMU Transmit
+ */
+
+ /* Setup Transmit Frame Data Pointer Auto-Increment (TXFDPR) */
+ ks_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+ /* Setup Receive Frame Data Pointer Auto-Increment */
+ ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
+
+ /* Setup Receive Frame Threshold - 1 frame (RXFCTFC) */
+ ks_wrreg16(ks, KS_RXFCTR, 1 & RXFCTR_THRESHOLD_MASK);
+
+ /* Setup RxQ Command Control (RXQCR) */
+ ks->rc_rxqcr = RXQCR_CMD_CNTL;
+ ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+ /**
+ * set the force mode to half duplex, default is full duplex
+ * because if the auto-negotiation fails, most switch uses
+ * half-duplex.
+ */
+
+ w = ks_rdreg16(ks, KS_P1MBCR);
+ w &= ~P1MBCR_FORCE_FDX;
+ ks_wrreg16(ks, KS_P1MBCR, w);
+
+ w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP;
+ ks_wrreg16(ks, KS_TXCR, w);
+
+ w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC;
+
+ if (ks->promiscuous) /* bPromiscuous */
+ w |= (RXCR1_RXAE | RXCR1_RXINVF);
+ else if (ks->all_mcast) /* Multicast address passed mode */
+ w |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA);
+ else /* Normal mode */
+ w |= RXCR1_RXPAFMA;
+
+ ks_wrreg16(ks, KS_RXCR1, w);
+} /*ks_setup */
+
+
+static void ks_setup_int(struct ks_net *ks)
+{
+ ks->rc_ier = 0x00;
+ /* Clear the interrupts status of the hardware. */
+ ks_wrreg16(ks, KS_ISR, 0xffff);
+
+ /* Enables the interrupts of the hardware. */
+ ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
+} /* ks_setup_int */
+
+static int ks_hw_init(struct ks_net *ks)
+{
+#define MHEADER_SIZE (sizeof(struct type_frame_head) * MAX_RECV_FRAMES)
+ ks->promiscuous = 0;
+ ks->all_mcast = 0;
+ ks->mcast_lst_size = 0;
+
+ ks->frame_head_info = (struct type_frame_head *) \
+ kmalloc(MHEADER_SIZE, GFP_KERNEL);
+ if (!ks->frame_head_info) {
+ printk(KERN_ERR "Error: Fail to allocate frame memory\n");
+ return false;
+ }
+
+ ks_set_mac(ks, KS_DEFAULT_MAC_ADDRESS);
+ return true;
+}
+
+
+static int __devinit ks8851_probe(struct platform_device *pdev)
+{
+ int err = -ENOMEM;
+ struct resource *io_d, *io_c;
+ struct net_device *netdev;
+ struct ks_net *ks;
+ u16 id, data;
+
+ io_d = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ io_c = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+ if (!request_mem_region(io_d->start, resource_size(io_d), DRV_NAME))
+ goto err_mem_region;
+
+ if (!request_mem_region(io_c->start, resource_size(io_c), DRV_NAME))
+ goto err_mem_region1;
+
+ netdev = alloc_etherdev(sizeof(struct ks_net));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ ks = netdev_priv(netdev);
+ ks->netdev = netdev;
+ ks->hw_addr = ioremap(io_d->start, resource_size(io_d));
+
+ if (!ks->hw_addr)
+ goto err_ioremap;
+
+ ks->hw_addr_cmd = ioremap(io_c->start, resource_size(io_c));
+ if (!ks->hw_addr_cmd)
+ goto err_ioremap1;
+
+ ks->irq = platform_get_irq(pdev, 0);
+
+ if (ks->irq < 0) {
+ err = ks->irq;
+ goto err_get_irq;
+ }
+
+ ks->pdev = pdev;
+
+ mutex_init(&ks->lock);
+ spin_lock_init(&ks->statelock);
+
+ netdev->netdev_ops = &ks_netdev_ops;
+ netdev->ethtool_ops = &ks_ethtool_ops;
+
+ /* setup mii state */
+ ks->mii.dev = netdev;
+ ks->mii.phy_id = 1,
+ ks->mii.phy_id_mask = 1;
+ ks->mii.reg_num_mask = 0xf;
+ ks->mii.mdio_read = ks_phy_read;
+ ks->mii.mdio_write = ks_phy_write;
+
+ ks_info(ks, "message enable is %d\n", msg_enable);
+ /* set the default message enable */
+ ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV |
+ NETIF_MSG_PROBE |
+ NETIF_MSG_LINK));
+ ks_read_config(ks);
+
+ /* simple check for a valid chip being connected to the bus */
+ if ((ks_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+ ks_err(ks, "failed to read device ID\n");
+ err = -ENODEV;
+ goto err_register;
+ }
+
+ if (ks_read_selftest(ks)) {
+ ks_err(ks, "failed to read device ID\n");
+ err = -ENODEV;
+ goto err_register;
+ }
+
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ platform_set_drvdata(pdev, netdev);
+
+ ks_soft_reset(ks, GRR_GSR);
+ ks_hw_init(ks);
+ ks_disable_qmu(ks);
+ ks_setup(ks);
+ ks_setup_int(ks);
+ memcpy(netdev->dev_addr, ks->mac_addr, 6);
+
+ data = ks_rdreg16(ks, KS_OBCR);
+ ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16MA);
+
+ /**
+ * If you want to use the default MAC addr,
+ * comment out the 2 functions below.
+ */
+
+ random_ether_addr(netdev->dev_addr);
+ ks_set_mac(ks, netdev->dev_addr);
+
+ id = ks_rdreg16(ks, KS_CIDER);
+
+ printk(KERN_INFO DRV_NAME
+ " Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
+ (id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);
+ return 0;
+
+err_register:
+err_get_irq:
+ iounmap(ks->hw_addr_cmd);
+err_ioremap1:
+ iounmap(ks->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ release_mem_region(io_c->start, resource_size(io_c));
+err_mem_region1:
+ release_mem_region(io_d->start, resource_size(io_d));
+err_mem_region:
+ return err;
+}
+
+static int __devexit ks8851_remove(struct platform_device *pdev)
+{
+ struct net_device *netdev = platform_get_drvdata(pdev);
+ struct ks_net *ks = netdev_priv(netdev);
+ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ kfree(ks->frame_head_info);
+ unregister_netdev(netdev);
+ iounmap(ks->hw_addr);
+ free_netdev(netdev);
+ release_mem_region(iomem->start, resource_size(iomem));
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+
+}
+
+static struct platform_driver ks8851_platform_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = ks8851_probe,
+ .remove = __devexit_p(ks8851_remove),
+};
+
+static int __init ks8851_init(void)
+{
+ return platform_driver_register(&ks8851_platform_driver);
+}
+
+static void __exit ks8851_exit(void)
+{
+ platform_driver_unregister(&ks8851_platform_driver);
+}
+
+module_init(ks8851_init);
+module_exit(ks8851_exit);
+
+MODULE_DESCRIPTION("KS8851 MLL Network driver");
+MODULE_AUTHOR("David Choi <david.choi@micrel.com>");
+MODULE_LICENSE("GPL");
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
+