diff options
Diffstat (limited to 'drivers/net/wireless/ath9k/main.c')
| -rw-r--r-- | drivers/net/wireless/ath9k/main.c | 2353 |
1 files changed, 1618 insertions, 735 deletions
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index f05f584ab7b..191eec50dc7 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -14,15 +14,13 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* mac80211 and PCI callbacks */ - #include <linux/nl80211.h> #include "core.h" +#include "reg.h" +#include "hw.h" #define ATH_PCI_VERSION "0.1" -#define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR 13 - static char *dev_info = "ath9k"; MODULE_AUTHOR("Atheros Communications"); @@ -36,9 +34,581 @@ static struct pci_device_id ath_pci_id_table[] __devinitdata = { { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */ { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ + { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */ { 0 } }; +static void ath_detach(struct ath_softc *sc); + +/* return bus cachesize in 4B word units */ + +static void bus_read_cachesize(struct ath_softc *sc, int *csz) +{ + u8 u8tmp; + + pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp); + *csz = (int)u8tmp; + + /* + * This check was put in to avoid "unplesant" consequences if + * the bootrom has not fully initialized all PCI devices. + * Sometimes the cache line size register is not set + */ + + if (*csz == 0) + *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ +} + +static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) +{ + sc->cur_rate_table = sc->hw_rate_table[mode]; + /* + * All protection frames are transmited at 2Mb/s for + * 11g, otherwise at 1Mb/s. + * XXX select protection rate index from rate table. + */ + sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0); +} + +static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan) +{ + if (chan->chanmode == CHANNEL_A) + return ATH9K_MODE_11A; + else if (chan->chanmode == CHANNEL_G) + return ATH9K_MODE_11G; + else if (chan->chanmode == CHANNEL_B) + return ATH9K_MODE_11B; + else if (chan->chanmode == CHANNEL_A_HT20) + return ATH9K_MODE_11NA_HT20; + else if (chan->chanmode == CHANNEL_G_HT20) + return ATH9K_MODE_11NG_HT20; + else if (chan->chanmode == CHANNEL_A_HT40PLUS) + return ATH9K_MODE_11NA_HT40PLUS; + else if (chan->chanmode == CHANNEL_A_HT40MINUS) + return ATH9K_MODE_11NA_HT40MINUS; + else if (chan->chanmode == CHANNEL_G_HT40PLUS) + return ATH9K_MODE_11NG_HT40PLUS; + else if (chan->chanmode == CHANNEL_G_HT40MINUS) + return ATH9K_MODE_11NG_HT40MINUS; + + WARN_ON(1); /* should not get here */ + + return ATH9K_MODE_11B; +} + +static void ath_update_txpow(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + u32 txpow; + + if (sc->sc_curtxpow != sc->sc_config.txpowlimit) { + ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit); + /* read back in case value is clamped */ + ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow); + sc->sc_curtxpow = txpow; + } +} + +static u8 parse_mpdudensity(u8 mpdudensity) +{ + /* + * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": + * 0 for no restriction + * 1 for 1/4 us + * 2 for 1/2 us + * 3 for 1 us + * 4 for 2 us + * 5 for 4 us + * 6 for 8 us + * 7 for 16 us + */ + switch (mpdudensity) { + case 0: + return 0; + case 1: + case 2: + case 3: + /* Our lower layer calculations limit our precision to + 1 microsecond */ + return 1; + case 4: + return 2; + case 5: + return 4; + case 6: + return 8; + case 7: + return 16; + default: + return 0; + } +} + +static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) +{ + struct ath_rate_table *rate_table = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + int i, maxrates; + + switch (band) { + case IEEE80211_BAND_2GHZ: + rate_table = sc->hw_rate_table[ATH9K_MODE_11G]; + break; + case IEEE80211_BAND_5GHZ: + rate_table = sc->hw_rate_table[ATH9K_MODE_11A]; + break; + default: + break; + } + + if (rate_table == NULL) + return; + + sband = &sc->sbands[band]; + rate = sc->rates[band]; + + if (rate_table->rate_cnt > ATH_RATE_MAX) + maxrates = ATH_RATE_MAX; + else + maxrates = rate_table->rate_cnt; + + for (i = 0; i < maxrates; i++) { + rate[i].bitrate = rate_table->info[i].ratekbps / 100; + rate[i].hw_value = rate_table->info[i].ratecode; + sband->n_bitrates++; + DPRINTF(sc, ATH_DBG_CONFIG, "Rate: %2dMbps, ratecode: %2d\n", + rate[i].bitrate / 10, rate[i].hw_value); + } +} + +static int ath_setup_channels(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + int nchan, i, a = 0, b = 0; + u8 regclassids[ATH_REGCLASSIDS_MAX]; + u32 nregclass = 0; + struct ieee80211_supported_band *band_2ghz; + struct ieee80211_supported_band *band_5ghz; + struct ieee80211_channel *chan_2ghz; + struct ieee80211_channel *chan_5ghz; + struct ath9k_channel *c; + + /* Fill in ah->ah_channels */ + if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (u32 *)&nchan, + regclassids, ATH_REGCLASSIDS_MAX, + &nregclass, CTRY_DEFAULT, false, 1)) { + u32 rd = ah->ah_currentRD; + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to collect channel list; " + "regdomain likely %u country code %u\n", + rd, CTRY_DEFAULT); + return -EINVAL; + } + + band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ]; + band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ]; + chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ]; + chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ]; + + for (i = 0; i < nchan; i++) { + c = &ah->ah_channels[i]; + if (IS_CHAN_2GHZ(c)) { + chan_2ghz[a].band = IEEE80211_BAND_2GHZ; + chan_2ghz[a].center_freq = c->channel; + chan_2ghz[a].max_power = c->maxTxPower; + + if (c->privFlags & CHANNEL_DISALLOW_ADHOC) + chan_2ghz[a].flags |= IEEE80211_CHAN_NO_IBSS; + if (c->channelFlags & CHANNEL_PASSIVE) + chan_2ghz[a].flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + band_2ghz->n_channels = ++a; + + DPRINTF(sc, ATH_DBG_CONFIG, "2MHz channel: %d, " + "channelFlags: 0x%x\n", + c->channel, c->channelFlags); + } else if (IS_CHAN_5GHZ(c)) { + chan_5ghz[b].band = IEEE80211_BAND_5GHZ; + chan_5ghz[b].center_freq = c->channel; + chan_5ghz[b].max_power = c->maxTxPower; + + if (c->privFlags & CHANNEL_DISALLOW_ADHOC) + chan_5ghz[b].flags |= IEEE80211_CHAN_NO_IBSS; + if (c->channelFlags & CHANNEL_PASSIVE) + chan_5ghz[b].flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + band_5ghz->n_channels = ++b; + + DPRINTF(sc, ATH_DBG_CONFIG, "5MHz channel: %d, " + "channelFlags: 0x%x\n", + c->channel, c->channelFlags); + } + } + + return 0; +} + +/* + * Set/change channels. If the channel is really being changed, it's done + * by reseting the chip. To accomplish this we must first cleanup any pending + * DMA, then restart stuff. +*/ +static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) +{ + struct ath_hal *ah = sc->sc_ah; + bool fastcc = true, stopped; + + if (sc->sc_flags & SC_OP_INVALID) + return -EIO; + + if (hchan->channel != sc->sc_ah->ah_curchan->channel || + hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags || + (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) || + (sc->sc_flags & SC_OP_FULL_RESET)) { + int status; + /* + * This is only performed if the channel settings have + * actually changed. + * + * To switch channels clear any pending DMA operations; + * wait long enough for the RX fifo to drain, reset the + * hardware at the new frequency, and then re-enable + * the relevant bits of the h/w. + */ + ath9k_hw_set_interrupts(ah, 0); + ath_draintxq(sc, false); + stopped = ath_stoprecv(sc); + + /* XXX: do not flush receive queue here. We don't want + * to flush data frames already in queue because of + * changing channel. */ + + if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) + fastcc = false; + + DPRINTF(sc, ATH_DBG_CONFIG, + "(%u MHz) -> (%u MHz), cflags:%x, chanwidth: %d\n", + sc->sc_ah->ah_curchan->channel, + hchan->channel, hchan->channelFlags, sc->tx_chan_width); + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, hchan, sc->tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, fastcc, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to reset channel %u (%uMhz) " + "flags 0x%x hal status %u\n", + ath9k_hw_mhz2ieee(ah, hchan->channel, + hchan->channelFlags), + hchan->channel, hchan->channelFlags, status); + spin_unlock_bh(&sc->sc_resetlock); + return -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); + + sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE; + sc->sc_flags &= ~SC_OP_FULL_RESET; + + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to restart recv logic\n"); + return -EIO; + } + + ath_setcurmode(sc, ath_chan2mode(hchan)); + ath_update_txpow(sc); + ath9k_hw_set_interrupts(ah, sc->sc_imask); + } + return 0; +} + +/* + * This routine performs the periodic noise floor calibration function + * that is used to adjust and optimize the chip performance. This + * takes environmental changes (location, temperature) into account. + * When the task is complete, it reschedules itself depending on the + * appropriate interval that was calculated. + */ +static void ath_ani_calibrate(unsigned long data) +{ + struct ath_softc *sc; + struct ath_hal *ah; + bool longcal = false; + bool shortcal = false; + bool aniflag = false; + unsigned int timestamp = jiffies_to_msecs(jiffies); + u32 cal_interval; + + sc = (struct ath_softc *)data; + ah = sc->sc_ah; + + /* + * don't calibrate when we're scanning. + * we are most likely not on our home channel. + */ + if (sc->rx.rxfilter & FIF_BCN_PRBRESP_PROMISC) + return; + + /* Long calibration runs independently of short calibration. */ + if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) { + longcal = true; + DPRINTF(sc, ATH_DBG_ANI, "longcal @%lu\n", jiffies); + sc->sc_ani.sc_longcal_timer = timestamp; + } + + /* Short calibration applies only while sc_caldone is false */ + if (!sc->sc_ani.sc_caldone) { + if ((timestamp - sc->sc_ani.sc_shortcal_timer) >= + ATH_SHORT_CALINTERVAL) { + shortcal = true; + DPRINTF(sc, ATH_DBG_ANI, "shortcal @%lu\n", jiffies); + sc->sc_ani.sc_shortcal_timer = timestamp; + sc->sc_ani.sc_resetcal_timer = timestamp; + } + } else { + if ((timestamp - sc->sc_ani.sc_resetcal_timer) >= + ATH_RESTART_CALINTERVAL) { + ath9k_hw_reset_calvalid(ah, ah->ah_curchan, + &sc->sc_ani.sc_caldone); + if (sc->sc_ani.sc_caldone) + sc->sc_ani.sc_resetcal_timer = timestamp; + } + } + + /* Verify whether we must check ANI */ + if ((timestamp - sc->sc_ani.sc_checkani_timer) >= + ATH_ANI_POLLINTERVAL) { + aniflag = true; + sc->sc_ani.sc_checkani_timer = timestamp; + } + + /* Skip all processing if there's nothing to do. */ + if (longcal || shortcal || aniflag) { + /* Call ANI routine if necessary */ + if (aniflag) + ath9k_hw_ani_monitor(ah, &sc->sc_halstats, + ah->ah_curchan); + + /* Perform calibration if necessary */ + if (longcal || shortcal) { + bool iscaldone = false; + + if (ath9k_hw_calibrate(ah, ah->ah_curchan, + sc->sc_rx_chainmask, longcal, + &iscaldone)) { + if (longcal) + sc->sc_ani.sc_noise_floor = + ath9k_hw_getchan_noise(ah, + ah->ah_curchan); + + DPRINTF(sc, ATH_DBG_ANI, + "calibrate chan %u/%x nf: %d\n", + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags, + sc->sc_ani.sc_noise_floor); + } else { + DPRINTF(sc, ATH_DBG_ANY, + "calibrate chan %u/%x failed\n", + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags); + } + sc->sc_ani.sc_caldone = iscaldone; + } + } + + /* + * Set timer interval based on previous results. + * The interval must be the shortest necessary to satisfy ANI, + * short calibration and long calibration. + */ + cal_interval = ATH_LONG_CALINTERVAL; + if (sc->sc_ah->ah_config.enable_ani) + cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL); + if (!sc->sc_ani.sc_caldone) + cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL); + + mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval)); +} + +/* + * Update tx/rx chainmask. For legacy association, + * hard code chainmask to 1x1, for 11n association, use + * the chainmask configuration. + */ +static void ath_update_chainmask(struct ath_softc *sc, int is_ht) +{ + sc->sc_flags |= SC_OP_CHAINMASK_UPDATE; + if (is_ht) { + sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask; + } else { + sc->sc_tx_chainmask = 1; + sc->sc_rx_chainmask = 1; + } + + DPRINTF(sc, ATH_DBG_CONFIG, "tx chmask: %d, rx chmask: %d\n", + sc->sc_tx_chainmask, sc->sc_rx_chainmask); +} + +static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta) +{ + struct ath_node *an; + + an = (struct ath_node *)sta->drv_priv; + + if (sc->sc_flags & SC_OP_TXAGGR) + ath_tx_node_init(sc, an); + + an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + + sta->ht_cap.ampdu_factor); + an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density); +} + +static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) +{ + struct ath_node *an = (struct ath_node *)sta->drv_priv; + + if (sc->sc_flags & SC_OP_TXAGGR) + ath_tx_node_cleanup(sc, an); +} + +static void ath9k_tasklet(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *)data; + u32 status = sc->sc_intrstatus; + + if (status & ATH9K_INT_FATAL) { + /* need a chip reset */ + ath_reset(sc, false); + return; + } else { + + if (status & + (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) { + spin_lock_bh(&sc->rx.rxflushlock); + ath_rx_tasklet(sc, 0); + spin_unlock_bh(&sc->rx.rxflushlock); + } + /* XXX: optimize this */ + if (status & ATH9K_INT_TX) + ath_tx_tasklet(sc); + } + + /* re-enable hardware interrupt */ + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); +} + +static irqreturn_t ath_isr(int irq, void *dev) +{ + struct ath_softc *sc = dev; + struct ath_hal *ah = sc->sc_ah; + enum ath9k_int status; + bool sched = false; + + do { + if (sc->sc_flags & SC_OP_INVALID) { + /* + * The hardware is not ready/present, don't + * touch anything. Note this can happen early + * on if the IRQ is shared. + */ + return IRQ_NONE; + } + if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */ + return IRQ_NONE; + } + + /* + * Figure out the reason(s) for the interrupt. Note + * that the hal returns a pseudo-ISR that may include + * bits we haven't explicitly enabled so we mask the + * value to insure we only process bits we requested. + */ + ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ + + status &= sc->sc_imask; /* discard unasked-for bits */ + + /* + * If there are no status bits set, then this interrupt was not + * for me (should have been caught above). + */ + if (!status) + return IRQ_NONE; + + sc->sc_intrstatus = status; + + if (status & ATH9K_INT_FATAL) { + /* need a chip reset */ + sched = true; + } else if (status & ATH9K_INT_RXORN) { + /* need a chip reset */ + sched = true; + } else { + if (status & ATH9K_INT_SWBA) { + /* schedule a tasklet for beacon handling */ + tasklet_schedule(&sc->bcon_tasklet); + } + if (status & ATH9K_INT_RXEOL) { + /* + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work + * at least on older hardware revs. + */ + sched = true; + } + + if (status & ATH9K_INT_TXURN) + /* bump tx trigger level */ + ath9k_hw_updatetxtriglevel(ah, true); + /* XXX: optimize this */ + if (status & ATH9K_INT_RX) + sched = true; + if (status & ATH9K_INT_TX) + sched = true; + if (status & ATH9K_INT_BMISS) + sched = true; + /* carrier sense timeout */ + if (status & ATH9K_INT_CST) + sched = true; + if (status & ATH9K_INT_MIB) { + /* + * Disable interrupts until we service the MIB + * interrupt; otherwise it will continue to + * fire. + */ + ath9k_hw_set_interrupts(ah, 0); + /* + * Let the hal handle the event. We assume + * it will clear whatever condition caused + * the interrupt. + */ + ath9k_hw_procmibevent(ah, &sc->sc_halstats); + ath9k_hw_set_interrupts(ah, sc->sc_imask); + } + if (status & ATH9K_INT_TIM_TIMER) { + if (!(ah->ah_caps.hw_caps & + ATH9K_HW_CAP_AUTOSLEEP)) { + /* Clear RxAbort bit so that we can + * receive frames */ + ath9k_hw_setrxabort(ah, 0); + sched = true; + } + } + } + } while (0); + + ath_debug_stat_interrupt(sc, status); + + if (sched) { + /* turn off every interrupt except SWBA */ + ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA)); + tasklet_schedule(&sc->intr_tq); + } + + return IRQ_HANDLED; +} + static int ath_get_channel(struct ath_softc *sc, struct ieee80211_channel *chan) { @@ -53,34 +623,39 @@ static int ath_get_channel(struct ath_softc *sc, } static u32 ath_get_extchanmode(struct ath_softc *sc, - struct ieee80211_channel *chan) + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type) { u32 chanmode = 0; - u8 ext_chan_offset = sc->sc_ht_info.ext_chan_offset; - enum ath9k_ht_macmode tx_chan_width = sc->sc_ht_info.tx_chan_width; switch (chan->band) { case IEEE80211_BAND_2GHZ: - if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) && - (tx_chan_width == ATH9K_HT_MACMODE_20)) + switch(channel_type) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: chanmode = CHANNEL_G_HT20; - if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) && - (tx_chan_width == ATH9K_HT_MACMODE_2040)) + break; + case NL80211_CHAN_HT40PLUS: chanmode = CHANNEL_G_HT40PLUS; - if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) && - (tx_chan_width == ATH9K_HT_MACMODE_2040)) + break; + case NL80211_CHAN_HT40MINUS: chanmode = CHANNEL_G_HT40MINUS; + break; + } break; case IEEE80211_BAND_5GHZ: - if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) && - (tx_chan_width == ATH9K_HT_MACMODE_20)) + switch(channel_type) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: chanmode = CHANNEL_A_HT20; - if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) && - (tx_chan_width == ATH9K_HT_MACMODE_2040)) + break; + case NL80211_CHAN_HT40PLUS: chanmode = CHANNEL_A_HT40PLUS; - if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) && - (tx_chan_width == ATH9K_HT_MACMODE_2040)) + break; + case NL80211_CHAN_HT40MINUS: chanmode = CHANNEL_A_HT40MINUS; + break; + } break; default: break; @@ -89,22 +664,31 @@ static u32 ath_get_extchanmode(struct ath_softc *sc, return chanmode; } +static int ath_keyset(struct ath_softc *sc, u16 keyix, + struct ath9k_keyval *hk, const u8 mac[ETH_ALEN]) +{ + bool status; + + status = ath9k_hw_set_keycache_entry(sc->sc_ah, + keyix, hk, mac, false); + + return status != false; +} -static int ath_setkey_tkip(struct ath_softc *sc, - struct ieee80211_key_conf *key, +static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key, struct ath9k_keyval *hk, const u8 *addr) { - u8 *key_rxmic = NULL; - u8 *key_txmic = NULL; + const u8 *key_rxmic; + const u8 *key_txmic; - key_txmic = key->key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY; - key_rxmic = key->key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY; + key_txmic = key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY; + key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY; if (addr == NULL) { /* Group key installation */ - memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); - return ath_keyset(sc, key->keyidx, hk, addr); + memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); + return ath_keyset(sc, keyix, hk, addr); } if (!sc->sc_splitmic) { /* @@ -113,34 +697,113 @@ static int ath_setkey_tkip(struct ath_softc *sc, */ memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic)); - return ath_keyset(sc, key->keyidx, hk, addr); + return ath_keyset(sc, keyix, hk, addr); } /* * TX key goes at first index, RX key at +32. * The hal handles the MIC keys at index+64. */ memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic)); - if (!ath_keyset(sc, key->keyidx, hk, NULL)) { + if (!ath_keyset(sc, keyix, hk, NULL)) { /* Txmic entry failed. No need to proceed further */ DPRINTF(sc, ATH_DBG_KEYCACHE, - "%s Setting TX MIC Key Failed\n", __func__); + "Setting TX MIC Key Failed\n"); return 0; } memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic)); /* XXX delete tx key on failure? */ - return ath_keyset(sc, key->keyidx+32, hk, addr); + return ath_keyset(sc, keyix + 32, hk, addr); +} + +static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc) +{ + int i; + + for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 2; i++) { + if (test_bit(i, sc->sc_keymap) || + test_bit(i + 64, sc->sc_keymap)) + continue; /* At least one part of TKIP key allocated */ + if (sc->sc_splitmic && + (test_bit(i + 32, sc->sc_keymap) || + test_bit(i + 64 + 32, sc->sc_keymap))) + continue; /* At least one part of TKIP key allocated */ + + /* Found a free slot for a TKIP key */ + return i; + } + return -1; +} + +static int ath_reserve_key_cache_slot(struct ath_softc *sc) +{ + int i; + + /* First, try to find slots that would not be available for TKIP. */ + if (sc->sc_splitmic) { + for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 4; i++) { + if (!test_bit(i, sc->sc_keymap) && + (test_bit(i + 32, sc->sc_keymap) || + test_bit(i + 64, sc->sc_keymap) || + test_bit(i + 64 + 32, sc->sc_keymap))) + return i; + if (!test_bit(i + 32, sc->sc_keymap) && + (test_bit(i, sc->sc_keymap) || + test_bit(i + 64, sc->sc_keymap) || + test_bit(i + 64 + 32, sc->sc_keymap))) + return i + 32; + if (!test_bit(i + 64, sc->sc_keymap) && + (test_bit(i , sc->sc_keymap) || + test_bit(i + 32, sc->sc_keymap) || + test_bit(i + 64 + 32, sc->sc_keymap))) + return i + 64; + if (!test_bit(i + 64 + 32, sc->sc_keymap) && + (test_bit(i, sc->sc_keymap) || + test_bit(i + 32, sc->sc_keymap) || + test_bit(i + 64, sc->sc_keymap))) + return i + 64 + 32; + } + } else { + for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax / 2; i++) { + if (!test_bit(i, sc->sc_keymap) && + test_bit(i + 64, sc->sc_keymap)) + return i; + if (test_bit(i, sc->sc_keymap) && + !test_bit(i + 64, sc->sc_keymap)) + return i + 64; + } + } + + /* No partially used TKIP slots, pick any available slot */ + for (i = IEEE80211_WEP_NKID; i < sc->sc_keymax; i++) { + /* Do not allow slots that could be needed for TKIP group keys + * to be used. This limitation could be removed if we know that + * TKIP will not be used. */ + if (i >= 64 && i < 64 + IEEE80211_WEP_NKID) + continue; + if (sc->sc_splitmic) { + if (i >= 32 && i < 32 + IEEE80211_WEP_NKID) + continue; + if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID) + continue; + } + + if (!test_bit(i, sc->sc_keymap)) + return i; /* Found a free slot for a key */ + } + + /* No free slot found */ + return -1; } static int ath_key_config(struct ath_softc *sc, const u8 *addr, struct ieee80211_key_conf *key) { - struct ieee80211_vif *vif; struct ath9k_keyval hk; const u8 *mac = NULL; int ret = 0; - enum nl80211_iftype opmode; + int idx; memset(&hk, 0, sizeof(hk)); @@ -158,226 +821,103 @@ static int ath_key_config(struct ath_softc *sc, return -EINVAL; } - hk.kv_len = key->keylen; + hk.kv_len = key->keylen; memcpy(hk.kv_val, key->key, key->keylen); - if (!sc->sc_vaps[0]) - return -EIO; + if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { + /* For now, use the default keys for broadcast keys. This may + * need to change with virtual interfaces. */ + idx = key->keyidx; + } else if (key->keyidx) { + struct ieee80211_vif *vif; - vif = sc->sc_vaps[0]->av_if_data; - opmode = vif->type; - - /* - * Strategy: - * For _M_STA mc tx, we will not setup a key at all since we never - * tx mc. - * _M_STA mc rx, we will use the keyID. - * for _M_IBSS mc tx, we will use the keyID, and no macaddr. - * for _M_IBSS mc rx, we will alloc a slot and plumb the mac of the - * peer node. BUT we will plumb a cleartext key so that we can do - * perSta default key table lookup in software. - */ - if (is_broadcast_ether_addr(addr)) { - switch (opmode) { - case NL80211_IFTYPE_STATION: - /* default key: could be group WPA key - * or could be static WEP key */ - mac = NULL; - break; - case NL80211_IFTYPE_ADHOC: - break; - case NL80211_IFTYPE_AP: - break; - default: - ASSERT(0); - break; - } + mac = addr; + vif = sc->sc_vaps[0]; + if (vif->type != NL80211_IFTYPE_AP) { + /* Only keyidx 0 should be used with unicast key, but + * allow this for client mode for now. */ + idx = key->keyidx; + } else + return -EIO; } else { mac = addr; + if (key->alg == ALG_TKIP) + idx = ath_reserve_key_cache_slot_tkip(sc); + else + idx = ath_reserve_key_cache_slot(sc); + if (idx < 0) + return -EIO; /* no free key cache entries */ } if (key->alg == ALG_TKIP) - ret = ath_setkey_tkip(sc, key, &hk, mac); + ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac); else - ret = ath_keyset(sc, key->keyidx, &hk, mac); + ret = ath_keyset(sc, idx, &hk, mac); if (!ret) return -EIO; - return 0; + set_bit(idx, sc->sc_keymap); + if (key->alg == ALG_TKIP) { + set_bit(idx + 64, sc->sc_keymap); + if (sc->sc_splitmic) { + set_bit(idx + 32, sc->sc_keymap); + set_bit(idx + 64 + 32, sc->sc_keymap); + } + } + + return idx; } static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key) { - int freeslot; + ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx); + if (key->hw_key_idx < IEEE80211_WEP_NKID) + return; - freeslot = (key->keyidx >= 4) ? 1 : 0; - ath_key_reset(sc, key->keyidx, freeslot); + clear_bit(key->hw_key_idx, sc->sc_keymap); + if (key->alg != ALG_TKIP) + return; + + clear_bit(key->hw_key_idx + 64, sc->sc_keymap); + if (sc->sc_splitmic) { + clear_bit(key->hw_key_idx + 32, sc->sc_keymap); + clear_bit(key->hw_key_idx + 64 + 32, sc->sc_keymap); + } } -static void setup_ht_cap(struct ieee80211_ht_info *ht_info) +static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info) { #define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */ #define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */ - ht_info->ht_supported = 1; - ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH - |(u16)IEEE80211_HT_CAP_SM_PS - |(u16)IEEE80211_HT_CAP_SGI_40 - |(u16)IEEE80211_HT_CAP_DSSSCCK40; + ht_info->ht_supported = true; + ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_SM_PS | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40; ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536; ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8; - /* setup supported mcs set */ - memset(ht_info->supp_mcs_set, 0, 16); - ht_info->supp_mcs_set[0] = 0xff; - ht_info->supp_mcs_set[1] = 0xff; - ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED; -} - -static int ath_rate2idx(struct ath_softc *sc, int rate) -{ - int i = 0, cur_band, n_rates; - struct ieee80211_hw *hw = sc->hw; - - cur_band = hw->conf.channel->band; - n_rates = sc->sbands[cur_band].n_bitrates; - - for (i = 0; i < n_rates; i++) { - if (sc->sbands[cur_band].bitrates[i].bitrate == rate) - break; - } - - /* - * NB:mac80211 validates rx rate index against the supported legacy rate - * index only (should be done against ht rates also), return the highest - * legacy rate index for rx rate which does not match any one of the - * supported basic and extended rates to make mac80211 happy. - * The following hack will be cleaned up once the issue with - * the rx rate index validation in mac80211 is fixed. - */ - if (i == n_rates) - return n_rates - 1; - return i; -} - -static void ath9k_rx_prepare(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - struct ieee80211_rx_status *rx_status) -{ - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_channel *curchan = hw->conf.channel; - - memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); - - rx_status->mactime = status->tsf; - rx_status->band = curchan->band; - rx_status->freq = curchan->center_freq; - rx_status->noise = sc->sc_ani.sc_noise_floor; - rx_status->signal = rx_status->noise + status->rssi; - rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100)); - rx_status->antenna = status->antenna; - - /* XXX Fix me, 64 cannot be the max rssi value, rigure it out */ - rx_status->qual = status->rssi * 100 / 64; - - if (status->flags & ATH_RX_MIC_ERROR) - rx_status->flag |= RX_FLAG_MMIC_ERROR; - if (status->flags & ATH_RX_FCS_ERROR) - rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; - - rx_status->flag |= RX_FLAG_TSFT; -} - -static u8 parse_mpdudensity(u8 mpdudensity) -{ - /* - * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": - * 0 for no restriction - * 1 for 1/4 us - * 2 for 1/2 us - * 3 for 1 us - * 4 for 2 us - * 5 for 4 us - * 6 for 8 us - * 7 for 16 us - */ - switch (mpdudensity) { - case 0: - return 0; - case 1: - case 2: - case 3: - /* Our lower layer calculations limit our precision to - 1 microsecond */ - return 1; - case 4: - return 2; - case 5: - return 4; - case 6: - return 8; - case 7: - return 16; - default: - return 0; - } -} - -static void ath9k_ht_conf(struct ath_softc *sc, - struct ieee80211_bss_conf *bss_conf) -{ -#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14) - struct ath_ht_info *ht_info = &sc->sc_ht_info; - - if (bss_conf->assoc_ht) { - ht_info->ext_chan_offset = - bss_conf->ht_bss_conf->bss_cap & - IEEE80211_HT_IE_CHA_SEC_OFFSET; - - if (!(bss_conf->ht_conf->cap & - IEEE80211_HT_CAP_40MHZ_INTOLERANT) && - (bss_conf->ht_bss_conf->bss_cap & - IEEE80211_HT_IE_CHA_WIDTH)) - ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040; - else - ht_info->tx_chan_width = ATH9K_HT_MACMODE_20; - - ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width); - ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + - bss_conf->ht_conf->ampdu_factor); - ht_info->mpdudensity = - parse_mpdudensity(bss_conf->ht_conf->ampdu_density); - - } - -#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT + /* set up supported mcs set */ + memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); + ht_info->mcs.rx_mask[0] = 0xff; + ht_info->mcs.rx_mask[1] = 0xff; + ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; } static void ath9k_bss_assoc_info(struct ath_softc *sc, + struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf) { - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_channel *curchan = hw->conf.channel; - struct ath_vap *avp; - int pos; - DECLARE_MAC_BUF(mac); + struct ath_vap *avp = (void *)vif->drv_priv; if (bss_conf->assoc) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n", - __func__, - bss_conf->aid); - - avp = sc->sc_vaps[0]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", - __func__); - return; - } + DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n", + bss_conf->aid, sc->sc_curbssid); /* New association, store aid */ - if (avp->av_opmode == ATH9K_M_STA) { + if (avp->av_opmode == NL80211_IFTYPE_STATION) { sc->sc_curaid = bss_conf->aid; ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, sc->sc_curaid); @@ -393,175 +933,16 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; - /* Update chainmask */ - ath_update_chainmask(sc, bss_conf->assoc_ht); - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: bssid %s aid 0x%x\n", - __func__, - print_mac(mac, sc->sc_curbssid), sc->sc_curaid); - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", - __func__, - curchan->center_freq); - - pos = ath_get_channel(sc, curchan); - if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Invalid channel\n", __func__); - return; - } - - if (hw->conf.ht_conf.ht_supported) - sc->sc_ah->ah_channels[pos].chanmode = - ath_get_extchanmode(sc, curchan); - else - sc->sc_ah->ah_channels[pos].chanmode = - (curchan->band == IEEE80211_BAND_2GHZ) ? - CHANNEL_G : CHANNEL_A; - - /* set h/w channel */ - if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to set channel\n", - __func__); - - ath_rate_newstate(sc, avp); - /* Update ratectrl about the new state */ - ath_rc_node_update(hw, avp->rc_node); - /* Start ANI */ mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL)); } else { - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Bss Info DISSOC\n", __func__); + DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISSOC\n"); sc->sc_curaid = 0; } } -void ath_get_beaconconfig(struct ath_softc *sc, - int if_id, - struct ath_beacon_config *conf) -{ - struct ieee80211_hw *hw = sc->hw; - - /* fill in beacon config data */ - - conf->beacon_interval = hw->conf.beacon_int; - conf->listen_interval = 100; - conf->dtim_count = 1; - conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; -} - -void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, - struct ath_xmit_status *tx_status, struct ath_node *an) -{ - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - - DPRINTF(sc, ATH_DBG_XMIT, - "%s: TX complete: skb: %p\n", __func__, skb); - - if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || - tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - /* free driver's private data area of tx_info */ - if (tx_info->driver_data[0] != NULL) - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; - } - - if (tx_status->flags & ATH_TX_BAR) { - tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - tx_status->flags &= ~ATH_TX_BAR; - } - - if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { - /* Frame was not ACKed, but an ACK was expected */ - tx_info->status.excessive_retries = 1; - } - } else { - /* Frame was ACKed */ - tx_info->flags |= IEEE80211_TX_STAT_ACK; - } - - tx_info->status.retry_count = tx_status->retries; - - ieee80211_tx_status(hw, skb); - if (an) - ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE); -} - -int _ath_rx_indicate(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - u16 keyix) -{ - struct ieee80211_hw *hw = sc->hw; - struct ath_node *an = NULL; - struct ieee80211_rx_status rx_status; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - int hdrlen = ieee80211_get_hdrlen_from_skb(skb); - int padsize; - enum ATH_RX_TYPE st; - - /* see if any padding is done by the hw and remove it */ - if (hdrlen & 3) { - padsize = hdrlen % 4; - memmove(skb->data + padsize, skb->data, hdrlen); - skb_pull(skb, padsize); - } - - /* Prepare rx status */ - ath9k_rx_prepare(sc, skb, status, &rx_status); - - if (!(keyix == ATH9K_RXKEYIX_INVALID) && - !(status->flags & ATH_RX_DECRYPT_ERROR)) { - rx_status.flag |= RX_FLAG_DECRYPTED; - } else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) - && !(status->flags & ATH_RX_DECRYPT_ERROR) - && skb->len >= hdrlen + 4) { - keyix = skb->data[hdrlen + 3] >> 6; - - if (test_bit(keyix, sc->sc_keymap)) - rx_status.flag |= RX_FLAG_DECRYPTED; - } - - spin_lock_bh(&sc->node_lock); - an = ath_node_find(sc, hdr->addr2); - spin_unlock_bh(&sc->node_lock); - - if (an) { - ath_rx_input(sc, an, - hw->conf.ht_conf.ht_supported, - skb, status, &st); - } - if (!an || (st != ATH_RX_CONSUMED)) - __ieee80211_rx(hw, skb, &rx_status); - - return 0; -} - -int ath_rx_subframe(struct ath_node *an, - struct sk_buff *skb, - struct ath_recv_status *status) -{ - struct ath_softc *sc = an->an_sc; - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_rx_status rx_status; - - /* Prepare rx status */ - ath9k_rx_prepare(sc, skb, status, &rx_status); - if (!(status->flags & ATH_RX_DECRYPT_ERROR)) - rx_status.flag |= RX_FLAG_DECRYPTED; - - __ieee80211_rx(hw, skb, &rx_status); - - return 0; -} - /********************************/ /* LED functions */ /********************************/ @@ -677,7 +1058,8 @@ fail: ath_deinit_leds(sc); } -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + /*******************/ /* Rfkill */ /*******************/ @@ -689,14 +1071,14 @@ static void ath_radio_enable(struct ath_softc *sc) spin_lock_bh(&sc->sc_resetlock); if (!ath9k_hw_reset(ah, ah->ah_curchan, - sc->sc_ht_info.tx_chan_width, + sc->tx_chan_width, sc->sc_tx_chainmask, sc->sc_rx_chainmask, sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset channel %u (%uMhz) " - "flags 0x%x hal status %u\n", __func__, + "Unable to reset channel %u (%uMhz) " + "flags 0x%x hal status %u\n", ath9k_hw_mhz2ieee(ah, ah->ah_curchan->channel, ah->ah_curchan->channelFlags), @@ -708,7 +1090,7 @@ static void ath_radio_enable(struct ath_softc *sc) ath_update_txpow(sc); if (ath_startrecv(sc) != 0) { DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to restart recv logic\n", __func__); + "Unable to restart recv logic\n"); return; } @@ -747,14 +1129,14 @@ static void ath_radio_disable(struct ath_softc *sc) spin_lock_bh(&sc->sc_resetlock); if (!ath9k_hw_reset(ah, ah->ah_curchan, - sc->sc_ht_info.tx_chan_width, + sc->tx_chan_width, sc->sc_tx_chainmask, sc->sc_rx_chainmask, sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset channel %u (%uMhz) " - "flags 0x%x hal status %u\n", __func__, + "Unable to reset channel %u (%uMhz) " + "flags 0x%x hal status %u\n", ath9k_hw_mhz2ieee(ah, ah->ah_curchan->channel, ah->ah_curchan->channelFlags), @@ -834,7 +1216,7 @@ static int ath_sw_toggle_radio(void *data, enum rfkill_state state) sc->sc_flags &= ~SC_OP_RFKILL_SW_BLOCKED; if (sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED) { DPRINTF(sc, ATH_DBG_FATAL, "Can't turn on the" - "radio as it is disabled by h/w \n"); + "radio as it is disabled by h/w\n"); return -EPERM; } ath_radio_enable(sc); @@ -878,61 +1260,258 @@ static void ath_deinit_rfkill(struct ath_softc *sc) sc->rf_kill.rfkill = NULL; } } + +static int ath_start_rfkill_poll(struct ath_softc *sc) +{ + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + queue_delayed_work(sc->hw->workqueue, + &sc->rf_kill.rfkill_poll, 0); + + if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) { + if (rfkill_register(sc->rf_kill.rfkill)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to register rfkill\n"); + rfkill_free(sc->rf_kill.rfkill); + + /* Deinitialize the device */ + ath_detach(sc); + if (sc->pdev->irq) + free_irq(sc->pdev->irq, sc); + pci_iounmap(sc->pdev, sc->mem); + pci_release_region(sc->pdev, 0); + pci_disable_device(sc->pdev); + ieee80211_free_hw(sc->hw); + return -EIO; + } else { + sc->sc_flags |= SC_OP_RFKILL_REGISTERED; + } + } + + return 0; +} #endif /* CONFIG_RFKILL */ -static int ath_detach(struct ath_softc *sc) +static void ath_detach(struct ath_softc *sc) { struct ieee80211_hw *hw = sc->hw; + int i = 0; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__); - - /* Deinit LED control */ - ath_deinit_leds(sc); + DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n"); -#ifdef CONFIG_RFKILL - /* deinit rfkill */ +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) ath_deinit_rfkill(sc); #endif - - /* Unregister hw */ + ath_deinit_leds(sc); ieee80211_unregister_hw(hw); - - /* unregister Rate control */ - ath_rate_control_unregister(); - - /* tx/rx cleanup */ - ath_rx_cleanup(sc); ath_tx_cleanup(sc); - /* Deinit */ + tasklet_kill(&sc->intr_tq); + tasklet_kill(&sc->bcon_tasklet); - ath_deinit(sc); + if (!(sc->sc_flags & SC_OP_INVALID)) + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); - return 0; + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->tx.txq[i]); + + ath9k_hw_detach(sc->sc_ah); + ath9k_exit_debug(sc); } -static int ath_attach(u16 devid, - struct ath_softc *sc) +static int ath_init(u16 devid, struct ath_softc *sc) { - struct ieee80211_hw *hw = sc->hw; - int error = 0; + struct ath_hal *ah = NULL; + int status; + int error = 0, i; + int csz = 0; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach ATH hw\n", __func__); + /* XXX: hardware will not be ready until ath_open() being called */ + sc->sc_flags |= SC_OP_INVALID; - error = ath_init(devid, sc); - if (error != 0) - return error; + if (ath9k_init_debug(sc) < 0) + printk(KERN_ERR "Unable to create debugfs files\n"); - /* Init nodes */ + spin_lock_init(&sc->sc_resetlock); + mutex_init(&sc->mutex); + tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); + tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet, + (unsigned long)sc); - INIT_LIST_HEAD(&sc->node_list); - spin_lock_init(&sc->node_lock); + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + bus_read_cachesize(sc, &csz); + /* XXX assert csz is non-zero */ + sc->sc_cachelsz = csz << 2; /* convert to bytes */ - /* get mac address from hardware and set in mac80211 */ + ah = ath9k_hw_attach(devid, sc, sc->mem, &status); + if (ah == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to attach hardware; HAL status %u\n", status); + error = -ENXIO; + goto bad; + } + sc->sc_ah = ah; - SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr); + /* Get the hardware key cache size. */ + sc->sc_keymax = ah->ah_caps.keycache_size; + if (sc->sc_keymax > ATH_KEYMAX) { + DPRINTF(sc, ATH_DBG_KEYCACHE, + "Warning, using only %u entries in %u key cache\n", + ATH_KEYMAX, sc->sc_keymax); + sc->sc_keymax = ATH_KEYMAX; + } + + /* + * Reset the key cache since some parts do not + * reset the contents on initial power up. + */ + for (i = 0; i < sc->sc_keymax; i++) + ath9k_hw_keyreset(ah, (u16) i); + + /* Collect the channel list using the default country code */ + + error = ath_setup_channels(sc); + if (error) + goto bad; + + /* default to MONITOR mode */ + sc->sc_ah->ah_opmode = NL80211_IFTYPE_MONITOR; + + + /* Setup rate tables */ + + ath_rate_attach(sc); + ath_setup_rates(sc, IEEE80211_BAND_2GHZ); + ath_setup_rates(sc, IEEE80211_BAND_5GHZ); + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that the hal handles reseting + * these queues at the needed time. + */ + sc->beacon.beaconq = ath_beaconq_setup(ah); + if (sc->beacon.beaconq == -1) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup a beacon xmit queue\n"); + error = -EIO; + goto bad2; + } + sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); + if (sc->beacon.cabq == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup CAB xmit queue\n"); + error = -EIO; + goto bad2; + } + + sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME; + ath_cabq_update(sc); + + for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++) + sc->tx.hwq_map[i] = -1; + + /* Setup data queues */ + /* NB: ensure BK queue is the lowest priority h/w queue */ + if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup xmit queue for BK traffic\n"); + error = -EIO; + goto bad2; + } + + if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup xmit queue for BE traffic\n"); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup xmit queue for VI traffic\n"); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to setup xmit queue for VO traffic\n"); + error = -EIO; + goto bad2; + } + + /* Initializes the noise floor to a reasonable default value. + * Later on this will be updated during ANI processing. */ + + sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; + setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); + + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL)) { + /* + * Whether we should enable h/w TKIP MIC. + * XXX: if we don't support WME TKIP MIC, then we wouldn't + * report WMM capable, so it's always safe to turn on + * TKIP MIC in this case. + */ + ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, + 0, 1, NULL); + } + + /* + * Check whether the separate key cache entries + * are required to handle both tx+rx MIC keys. + * With split mic keys the number of stations is limited + * to 27 otherwise 59. + */ + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_MIC, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT, + 0, NULL)) + sc->sc_splitmic = 1; + + /* turn on mcast key search if possible */ + if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) + (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1, + 1, NULL); + + sc->sc_config.txpowlimit = ATH_TXPOWER_MAX; + sc->sc_config.txpowlimit_override = 0; + + /* 11n Capabilities */ + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { + sc->sc_flags |= SC_OP_TXAGGR; + sc->sc_flags |= SC_OP_RXAGGR; + } + + sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; + + ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); + sc->rx.defant = ath9k_hw_getdefantenna(ah); + + ath9k_hw_getmac(ah, sc->sc_myaddr); + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) { + ath9k_hw_getbssidmask(ah, sc->sc_bssidmask); + ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask); + ath9k_hw_setbssidmask(ah, sc->sc_bssidmask); + } + + sc->beacon.slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */ + + /* initialize beacon slots */ + for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) + sc->beacon.bslot[i] = ATH_IF_ID_ANY; + + /* save MISC configurations */ + sc->sc_config.swBeaconProcess = 1; /* setup channels and rates */ @@ -942,55 +1521,81 @@ static int ath_attach(u16 devid, sc->rates[IEEE80211_BAND_2GHZ]; sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) - /* Setup HT capabilities for 2.4Ghz*/ - setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info); - - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &sc->sbands[IEEE80211_BAND_2GHZ]; - if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { sc->sbands[IEEE80211_BAND_5GHZ].channels = sc->channels[IEEE80211_BAND_5GHZ]; sc->sbands[IEEE80211_BAND_5GHZ].bitrates = sc->rates[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].band = - IEEE80211_BAND_5GHZ; + sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; + } - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) - /* Setup HT capabilities for 5Ghz*/ - setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info); + return 0; +bad2: + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->tx.txq[i]); +bad: + if (ah) + ath9k_hw_detach(ah); - hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &sc->sbands[IEEE80211_BAND_5GHZ]; - } + return error; +} + +static int ath_attach(u16 devid, struct ath_softc *sc) +{ + struct ieee80211_hw *hw = sc->hw; + int error = 0; + + DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n"); + + error = ath_init(devid, sc); + if (error != 0) + return error; + + /* get mac address from hardware and set in mac80211 */ + + SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr); + + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_AMPDU_AGGREGATION; - /* FIXME: Have to figure out proper hw init values later */ + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); hw->queues = 4; - hw->ampdu_queues = 1; + hw->max_rates = 4; + hw->max_rate_tries = ATH_11N_TXMAXTRY; + hw->sta_data_size = sizeof(struct ath_node); + hw->vif_data_size = sizeof(struct ath_vap); - /* Register rate control */ hw->rate_control_algorithm = "ath9k_rate_control"; - error = ath_rate_control_register(); - if (error != 0) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to register rate control " - "algorithm:%d\n", __func__, error); - ath_rate_control_unregister(); - goto bad; - } - error = ieee80211_register_hw(hw); - if (error != 0) { - ath_rate_control_unregister(); - goto bad; + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { + setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_cap); + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) + setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_cap); } - /* Initialize LED control */ - ath_init_leds(sc); + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &sc->sbands[IEEE80211_BAND_2GHZ]; + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) + hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &sc->sbands[IEEE80211_BAND_5GHZ]; -#ifdef CONFIG_RFKILL + /* initialize tx/rx engine */ + error = ath_tx_init(sc, ATH_TXBUF); + if (error != 0) + goto detach; + + error = ath_rx_init(sc, ATH_RXBUF); + if (error != 0) + goto detach; + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) /* Initialze h/w Rfkill */ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll); @@ -1000,88 +1605,371 @@ static int ath_attach(u16 devid, goto detach; #endif - /* initialize tx/rx engine */ - - error = ath_tx_init(sc, ATH_TXBUF); - if (error != 0) - goto detach; + error = ieee80211_register_hw(hw); - error = ath_rx_init(sc, ATH_RXBUF); - if (error != 0) - goto detach; + /* Initialize LED control */ + ath_init_leds(sc); return 0; detach: ath_detach(sc); -bad: return error; } +int ath_reset(struct ath_softc *sc, bool retry_tx) +{ + struct ath_hal *ah = sc->sc_ah; + int status; + int error = 0; + + ath9k_hw_set_interrupts(ah, 0); + ath_draintxq(sc, retry_tx); + ath_stoprecv(sc); + ath_flushrecv(sc); + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, + sc->tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to reset hardware; hal status %u\n", status); + error = -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); + + if (ath_startrecv(sc) != 0) + DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n"); + + /* + * We may be doing a reset in response to a request + * that changes the channel so update any state that + * might change as a result. + */ + ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan)); + + ath_update_txpow(sc); + + if (sc->sc_flags & SC_OP_BEACONS) + ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ + + ath9k_hw_set_interrupts(ah, sc->sc_imask); + + if (retry_tx) { + int i; + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (ATH_TXQ_SETUP(sc, i)) { + spin_lock_bh(&sc->tx.txq[i].axq_lock); + ath_txq_schedule(sc, &sc->tx.txq[i]); + spin_unlock_bh(&sc->tx.txq[i].axq_lock); + } + } + } + + return error; +} + +/* + * This function will allocate both the DMA descriptor structure, and the + * buffers it contains. These are used to contain the descriptors used + * by the system. +*/ +int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, + struct list_head *head, const char *name, + int nbuf, int ndesc) +{ +#define DS2PHYS(_dd, _ds) \ + ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) +#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0) +#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096) + + struct ath_desc *ds; + struct ath_buf *bf; + int i, bsize, error; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n", + name, nbuf, ndesc); + + /* ath_desc must be a multiple of DWORDs */ + if ((sizeof(struct ath_desc) % 4) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, "ath_desc not DWORD aligned\n"); + ASSERT((sizeof(struct ath_desc) % 4) == 0); + error = -ENOMEM; + goto fail; + } + + dd->dd_name = name; + dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; + + /* + * Need additional DMA memory because we can't use + * descriptors that cross the 4K page boundary. Assume + * one skipped descriptor per 4K page. + */ + if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { + u32 ndesc_skipped = + ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); + u32 dma_len; + + while (ndesc_skipped) { + dma_len = ndesc_skipped * sizeof(struct ath_desc); + dd->dd_desc_len += dma_len; + + ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); + }; + } + + /* allocate descriptors */ + dd->dd_desc = pci_alloc_consistent(sc->pdev, + dd->dd_desc_len, + &dd->dd_desc_paddr); + if (dd->dd_desc == NULL) { + error = -ENOMEM; + goto fail; + } + ds = dd->dd_desc; + DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n", + dd->dd_name, ds, (u32) dd->dd_desc_len, + ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); + + /* allocate buffers */ + bsize = sizeof(struct ath_buf) * nbuf; + bf = kmalloc(bsize, GFP_KERNEL); + if (bf == NULL) { + error = -ENOMEM; + goto fail2; + } + memset(bf, 0, bsize); + dd->dd_bufptr = bf; + + INIT_LIST_HEAD(head); + for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + + if (!(sc->sc_ah->ah_caps.hw_caps & + ATH9K_HW_CAP_4KB_SPLITTRANS)) { + /* + * Skip descriptor addresses which can cause 4KB + * boundary crossing (addr + length) with a 32 dword + * descriptor fetch. + */ + while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { + ASSERT((caddr_t) bf->bf_desc < + ((caddr_t) dd->dd_desc + + dd->dd_desc_len)); + + ds += ndesc; + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + } + } + list_add_tail(&bf->list, head); + } + return 0; +fail2: + pci_free_consistent(sc->pdev, + dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); +fail: + memset(dd, 0, sizeof(*dd)); + return error; +#undef ATH_DESC_4KB_BOUND_CHECK +#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED +#undef DS2PHYS +} + +void ath_descdma_cleanup(struct ath_softc *sc, + struct ath_descdma *dd, + struct list_head *head) +{ + pci_free_consistent(sc->pdev, + dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); + + INIT_LIST_HEAD(head); + kfree(dd->dd_bufptr); + memset(dd, 0, sizeof(*dd)); +} + +int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case 0: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_VO]; + break; + case 1: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_VI]; + break; + case 2: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE]; + break; + case 3: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_BK]; + break; + default: + qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE]; + break; + } + + return qnum; +} + +int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case ATH9K_WME_AC_VO: + qnum = 0; + break; + case ATH9K_WME_AC_VI: + qnum = 1; + break; + case ATH9K_WME_AC_BE: + qnum = 2; + break; + case ATH9K_WME_AC_BK: + qnum = 3; + break; + default: + qnum = -1; + break; + } + + return qnum; +} + +/**********************/ +/* mac80211 callbacks */ +/**********************/ + static int ath9k_start(struct ieee80211_hw *hw) { struct ath_softc *sc = hw->priv; struct ieee80211_channel *curchan = hw->conf.channel; - int error = 0, pos; + struct ath9k_channel *init_channel; + int error = 0, pos, status; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with " - "initial channel: %d MHz\n", __func__, curchan->center_freq); + DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with " + "initial channel: %d MHz\n", curchan->center_freq); /* setup initial channel */ pos = ath_get_channel(sc, curchan); if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); - return -EINVAL; + DPRINTF(sc, ATH_DBG_FATAL, "Invalid channel: %d\n", curchan->center_freq); + error = -EINVAL; + goto error; } + sc->tx_chan_width = ATH9K_HT_MACMODE_20; sc->sc_ah->ah_channels[pos].chanmode = (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; + init_channel = &sc->sc_ah->ah_channels[pos]; - /* open ath_dev */ - error = ath_open(sc, &sc->sc_ah->ah_channels[pos]); - if (error) { + /* Reset SERDES registers */ + ath9k_hw_configpcipowersave(sc->sc_ah, 0); + + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(sc->sc_ah, init_channel, + sc->tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to complete ath_open\n", __func__); - return error; + "Unable to reset hardware; hal status %u " + "(freq %u flags 0x%x)\n", status, + init_channel->channel, init_channel->channelFlags); + error = -EIO; + spin_unlock_bh(&sc->sc_resetlock); + goto error; } + spin_unlock_bh(&sc->sc_resetlock); -#ifdef CONFIG_RFKILL - /* Start rfkill polling */ - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - queue_delayed_work(sc->hw->workqueue, - &sc->rf_kill.rfkill_poll, 0); - - if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) { - if (rfkill_register(sc->rf_kill.rfkill)) { - DPRINTF(sc, ATH_DBG_FATAL, - "Unable to register rfkill\n"); - rfkill_free(sc->rf_kill.rfkill); + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ + ath_update_txpow(sc); - /* Deinitialize the device */ - if (sc->pdev->irq) - free_irq(sc->pdev->irq, sc); - ath_detach(sc); - pci_iounmap(sc->pdev, sc->mem); - pci_release_region(sc->pdev, 0); - pci_disable_device(sc->pdev); - ieee80211_free_hw(hw); - return -EIO; - } else { - sc->sc_flags |= SC_OP_RFKILL_REGISTERED; - } + /* + * Setup the hardware after reset: + * The receive engine is set going. + * Frame transmit is handled entirely + * in the frame output path; there's nothing to do + * here except setup the interrupt mask. + */ + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "Unable to start recv logic\n"); + error = -EIO; + goto error; } + + /* Setup our intr mask. */ + sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX + | ATH9K_INT_RXEOL | ATH9K_INT_RXORN + | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL; + + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT) + sc->sc_imask |= ATH9K_INT_GTT; + + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) + sc->sc_imask |= ATH9K_INT_CST; + + /* + * Enable MIB interrupts when there are hardware phy counters. + * Note we only do this (at the moment) for station mode. + */ + if (ath9k_hw_phycounters(sc->sc_ah) && + ((sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) || + (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC))) + sc->sc_imask |= ATH9K_INT_MIB; + /* + * Some hardware processes the TIM IE and fires an + * interrupt when the TIM bit is set. For hardware + * that does, if not overridden by configuration, + * enable the TIM interrupt when operating as station. + */ + if ((sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) && + (sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) && + !sc->sc_config.swBeaconProcess) + sc->sc_imask |= ATH9K_INT_TIM; + + ath_setcurmode(sc, ath_chan2mode(init_channel)); + + sc->sc_flags &= ~SC_OP_INVALID; + + /* Disable BMISS interrupt when we're not associated */ + sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); + + ieee80211_wake_queues(sc->hw); + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + error = ath_start_rfkill_poll(sc); #endif - ieee80211_wake_queues(hw); - return 0; +error: + return error; } static int ath9k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ath_softc *sc = hw->priv; + struct ath_tx_control txctl; int hdrlen, padsize; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + memset(&txctl, 0, sizeof(struct ath_tx_control)); /* * As a temporary workaround, assign seq# here; this will likely need @@ -1091,9 +1979,9 @@ static int ath9k_tx(struct ieee80211_hw *hw, if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) - sc->seq_no += 0x10; + sc->tx.seq_no += 0x10; hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no); } /* Add the padding after the header if this is not already done */ @@ -1106,45 +1994,68 @@ static int ath9k_tx(struct ieee80211_hw *hw, memmove(skb->data, skb->data + padsize, hdrlen); } - DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting packet, skb: %p\n", - __func__, - skb); + /* Check if a tx queue is available */ - if (ath_tx_start(sc, skb) != 0) { - DPRINTF(sc, ATH_DBG_XMIT, "%s: TX failed\n", __func__); - dev_kfree_skb_any(skb); - /* FIXME: Check for proper return value from ATH_DEV */ - return 0; + txctl.txq = ath_test_get_txq(sc, skb); + if (!txctl.txq) + goto exit; + + DPRINTF(sc, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb); + + if (ath_tx_start(sc, skb, &txctl) != 0) { + DPRINTF(sc, ATH_DBG_XMIT, "TX failed\n"); + goto exit; } return 0; +exit: + dev_kfree_skb_any(skb); + return 0; } static void ath9k_stop(struct ieee80211_hw *hw) { struct ath_softc *sc = hw->priv; - int error; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__); + if (sc->sc_flags & SC_OP_INVALID) { + DPRINTF(sc, ATH_DBG_ANY, "Device not present\n"); + return; + } - error = ath_suspend(sc); - if (error) - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Device is no longer present\n", __func__); + DPRINTF(sc, ATH_DBG_CONFIG, "Cleaning up\n"); + + ieee80211_stop_queues(sc->hw); + + /* make sure h/w will not generate any interrupt + * before setting the invalid flag. */ + ath9k_hw_set_interrupts(sc->sc_ah, 0); - ieee80211_stop_queues(hw); + if (!(sc->sc_flags & SC_OP_INVALID)) { + ath_draintxq(sc, false); + ath_stoprecv(sc); + ath9k_hw_phy_disable(sc->sc_ah); + } else + sc->rx.rxlink = NULL; -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); #endif + /* disable HAL and put h/w to sleep */ + ath9k_hw_disable(sc->sc_ah); + ath9k_hw_configpcipowersave(sc->sc_ah, 1); + + sc->sc_flags |= SC_OP_INVALID; + + DPRINTF(sc, ATH_DBG_CONFIG, "Driver halt\n"); } static int ath9k_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct ath_softc *sc = hw->priv; - int error, ic_opmode = 0; + struct ath_vap *avp = (void *)conf->vif->drv_priv; + enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED; /* Support only vap for now */ @@ -1153,32 +2064,34 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, switch (conf->type) { case NL80211_IFTYPE_STATION: - ic_opmode = ATH9K_M_STA; + ic_opmode = NL80211_IFTYPE_STATION; break; case NL80211_IFTYPE_ADHOC: - ic_opmode = ATH9K_M_IBSS; + ic_opmode = NL80211_IFTYPE_ADHOC; break; case NL80211_IFTYPE_AP: - ic_opmode = ATH9K_M_HOSTAP; + ic_opmode = NL80211_IFTYPE_AP; break; default: DPRINTF(sc, ATH_DBG_FATAL, - "%s: Interface type %d not yet supported\n", - __func__, conf->type); + "Interface type %d not yet supported\n", conf->type); return -EOPNOTSUPP; } - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a VAP of type: %d\n", - __func__, - ic_opmode); + DPRINTF(sc, ATH_DBG_CONFIG, "Attach a VAP of type: %d\n", ic_opmode); - error = ath_vap_attach(sc, 0, conf->vif, ic_opmode); - if (error) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to attach vap, error: %d\n", - __func__, error); - return error; - } + /* Set the VAP opmode */ + avp->av_opmode = ic_opmode; + avp->av_bslot = -1; + + if (ic_opmode == NL80211_IFTYPE_AP) + ath9k_hw_set_tsfadjust(sc->sc_ah, 1); + + sc->sc_vaps[0] = conf->vif; + sc->sc_nvaps++; + + /* Set the device opmode */ + sc->sc_ah->ah_opmode = ic_opmode; if (conf->type == NL80211_IFTYPE_AP) { /* TODO: is this a suitable place to start ANI for AP mode? */ @@ -1194,78 +2107,76 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct ath_softc *sc = hw->priv; - struct ath_vap *avp; - int error; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach VAP\n", __func__); + struct ath_vap *avp = (void *)conf->vif->drv_priv; - avp = sc->sc_vaps[0]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", - __func__); - return; - } + DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n"); -#ifdef CONFIG_SLOW_ANT_DIV - ath_slow_ant_div_stop(&sc->sc_antdiv); -#endif /* Stop ANI */ del_timer_sync(&sc->sc_ani.timer); - /* Update ratectrl */ - ath_rate_newstate(sc, avp); - /* Reclaim beacon resources */ - if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP || - sc->sc_ah->ah_opmode == ATH9K_M_IBSS) { - ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); + if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP || + sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC) { + ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); ath_beacon_return(sc, avp); } - /* Set interrupt mask */ - sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); - ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL); sc->sc_flags &= ~SC_OP_BEACONS; - error = ath_vap_detach(sc, 0); - if (error) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to detach vap, error: %d\n", - __func__, error); + sc->sc_vaps[0] = NULL; + sc->sc_nvaps--; } -static int ath9k_config(struct ieee80211_hw *hw, - struct ieee80211_conf *conf) +static int ath9k_config(struct ieee80211_hw *hw, u32 changed) { struct ath_softc *sc = hw->priv; - struct ieee80211_channel *curchan = hw->conf.channel; - int pos; + struct ieee80211_conf *conf = &hw->conf; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", - __func__, - curchan->center_freq); + mutex_lock(&sc->mutex); + if (changed & (IEEE80211_CONF_CHANGE_CHANNEL | + IEEE80211_CONF_CHANGE_HT)) { + struct ieee80211_channel *curchan = hw->conf.channel; + int pos; - pos = ath_get_channel(sc, curchan); - if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); - return -EINVAL; - } + DPRINTF(sc, ATH_DBG_CONFIG, "Set channel: %d MHz\n", + curchan->center_freq); - sc->sc_ah->ah_channels[pos].chanmode = - (curchan->band == IEEE80211_BAND_2GHZ) ? - CHANNEL_G : CHANNEL_A; + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, "Invalid channel: %d\n", + curchan->center_freq); + mutex_unlock(&sc->mutex); + return -EINVAL; + } - if (sc->sc_curaid && hw->conf.ht_conf.ht_supported) + sc->tx_chan_width = ATH9K_HT_MACMODE_20; sc->sc_ah->ah_channels[pos].chanmode = - ath_get_extchanmode(sc, curchan); + (curchan->band == IEEE80211_BAND_2GHZ) ? + CHANNEL_G : CHANNEL_A; - sc->sc_config.txpowlimit = 2 * conf->power_level; + if (conf->ht.enabled) { + if (conf->ht.channel_type == NL80211_CHAN_HT40PLUS || + conf->ht.channel_type == NL80211_CHAN_HT40MINUS) + sc->tx_chan_width = ATH9K_HT_MACMODE_2040; - /* set h/w channel */ - if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) - DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n", - __func__); + sc->sc_ah->ah_channels[pos].chanmode = + ath_get_extchanmode(sc, curchan, + conf->ht.channel_type); + } + + if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) { + DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n"); + mutex_unlock(&sc->mutex); + return -EINVAL; + } + + ath_update_chainmask(sc, conf->ht.enabled); + } + + if (changed & IEEE80211_CONF_CHANGE_POWER) + sc->sc_config.txpowlimit = 2 * conf->power_level; + mutex_unlock(&sc->mutex); return 0; } @@ -1275,23 +2186,15 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, { struct ath_softc *sc = hw->priv; struct ath_hal *ah = sc->sc_ah; - struct ath_vap *avp; + struct ath_vap *avp = (void *)vif->drv_priv; u32 rfilt = 0; int error, i; - DECLARE_MAC_BUF(mac); - - avp = sc->sc_vaps[0]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", - __func__); - return -EINVAL; - } /* TODO: Need to decide which hw opmode to use for multi-interface * cases */ if (vif->type == NL80211_IFTYPE_AP && - ah->ah_opmode != ATH9K_M_HOSTAP) { - ah->ah_opmode = ATH9K_M_HOSTAP; + ah->ah_opmode != NL80211_IFTYPE_AP) { + ah->ah_opmode = NL80211_IFTYPE_STATION; ath9k_hw_setopmode(ah); ath9k_hw_write_associd(ah, sc->sc_myaddr, 0); /* Request full reset to get hw opmode changed properly */ @@ -1303,9 +2206,6 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, switch (vif->type) { case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_ADHOC: - /* Update ratectrl about the new state */ - ath_rate_newstate(sc, avp); - /* Set BSSID */ memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN); sc->sc_curaid = 0; @@ -1315,27 +2215,9 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, /* Set aggregation protection mode parameters */ sc->sc_config.ath_aggr_prot = 0; - /* - * Reset our TSF so that its value is lower than the - * beacon that we are trying to catch. - * Only then hw will update its TSF register with the - * new beacon. Reset the TSF before setting the BSSID - * to avoid allowing in any frames that would update - * our TSF only to have us clear it - * immediately thereafter. - */ - ath9k_hw_reset_tsf(sc->sc_ah); - - /* Disable BMISS interrupt when we're not associated */ - ath9k_hw_set_interrupts(sc->sc_ah, - sc->sc_imask & - ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS)); - sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: RX filter 0x%x bssid %s aid 0x%x\n", - __func__, rfilt, - print_mac(mac, sc->sc_curbssid), sc->sc_curaid); + "RX filter 0x%x bssid %pM aid 0x%x\n", + rfilt, sc->sc_curbssid, sc->sc_curaid); /* need to reconfigure the beacon */ sc->sc_flags &= ~SC_OP_BEACONS ; @@ -1357,7 +2239,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, * causes reconfiguration; we may be called * with beacon transmission active. */ - ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); + ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); error = ath_beacon_alloc(sc, 0); if (error != 0) @@ -1403,7 +2285,7 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw, changed_flags &= SUPPORTED_FILTERS; *total_flags &= SUPPORTED_FILTERS; - sc->rx_filter = *total_flags; + sc->rx.rxfilter = *total_flags; rfilt = ath_calcrxfilter(sc); ath9k_hw_setrxfilter(sc->sc_ah, rfilt); @@ -1412,8 +2294,7 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw, ath9k_hw_write_associd(sc->sc_ah, ath_bcast_mac, 0); } - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set HW RX filter: 0x%x\n", - __func__, sc->rx_filter); + DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter); } static void ath9k_sta_notify(struct ieee80211_hw *hw, @@ -1422,37 +2303,13 @@ static void ath9k_sta_notify(struct ieee80211_hw *hw, struct ieee80211_sta *sta) { struct ath_softc *sc = hw->priv; - struct ath_node *an; - unsigned long flags; - DECLARE_MAC_BUF(mac); - - spin_lock_irqsave(&sc->node_lock, flags); - an = ath_node_find(sc, sta->addr); - spin_unlock_irqrestore(&sc->node_lock, flags); switch (cmd) { case STA_NOTIFY_ADD: - spin_lock_irqsave(&sc->node_lock, flags); - if (!an) { - ath_node_attach(sc, sta->addr, 0); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %s\n", - __func__, print_mac(mac, sta->addr)); - } else { - ath_node_get(sc, sta->addr); - } - spin_unlock_irqrestore(&sc->node_lock, flags); + ath_node_attach(sc, sta); break; case STA_NOTIFY_REMOVE: - if (!an) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Removal of a non-existent node\n", - __func__); - else { - ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %s\n", - __func__, - print_mac(mac, sta->addr)); - } + ath_node_detach(sc, sta); break; default: break; @@ -1477,20 +2334,14 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw, qnum = ath_get_hal_qnum(queue, sc); DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Configure tx [queue/halq] [%d/%d], " + "Configure tx [queue/halq] [%d/%d], " "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", - __func__, - queue, - qnum, - params->aifs, - params->cw_min, - params->cw_max, - params->txop); + queue, qnum, params->aifs, params->cw_min, + params->cw_max, params->txop); ret = ath_txq_update(sc, qnum, &qi); if (ret) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: TXQ Update failed\n", __func__); + DPRINTF(sc, ATH_DBG_FATAL, "TXQ Update failed\n"); return ret; } @@ -1504,23 +2355,22 @@ static int ath9k_set_key(struct ieee80211_hw *hw, struct ath_softc *sc = hw->priv; int ret = 0; - DPRINTF(sc, ATH_DBG_KEYCACHE, " %s: Set HW Key\n", __func__); + DPRINTF(sc, ATH_DBG_KEYCACHE, "Set HW Key\n"); switch (cmd) { case SET_KEY: ret = ath_key_config(sc, addr, key); - if (!ret) { - set_bit(key->keyidx, sc->sc_keymap); - key->hw_key_idx = key->keyidx; + if (ret >= 0) { + key->hw_key_idx = ret; /* push IV and Michael MIC generation to stack */ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; if (key->alg == ALG_TKIP) key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + ret = 0; } break; case DISABLE_KEY: ath_key_delete(sc, key); - clear_bit(key->keyidx, sc->sc_keymap); break; default: ret = -EINVAL; @@ -1537,8 +2387,7 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, struct ath_softc *sc = hw->priv; if (changed & BSS_CHANGED_ERP_PREAMBLE) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed PREAMBLE %d\n", - __func__, + DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n", bss_conf->use_short_preamble); if (bss_conf->use_short_preamble) sc->sc_flags |= SC_OP_PREAMBLE_SHORT; @@ -1547,8 +2396,7 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_ERP_CTS_PROT) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed CTS PROT %d\n", - __func__, + DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n", bss_conf->use_cts_prot); if (bss_conf->use_cts_prot && hw->conf.channel->band != IEEE80211_BAND_5GHZ) @@ -1557,18 +2405,10 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; } - if (changed & BSS_CHANGED_HT) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n", - __func__, - bss_conf->assoc_ht); - ath9k_ht_conf(sc, bss_conf); - } - if (changed & BSS_CHANGED_ASSOC) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n", - __func__, + DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n", bss_conf->assoc); - ath9k_bss_assoc_info(sc, bss_conf); + ath9k_bss_assoc_info(sc, vif, bss_conf); } } @@ -1601,50 +2441,37 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, switch (action) { case IEEE80211_AMPDU_RX_START: - ret = ath_rx_aggr_start(sc, sta->addr, tid, ssn); - if (ret < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to start RX aggregation\n", - __func__); + if (!(sc->sc_flags & SC_OP_RXAGGR)) + ret = -ENOTSUPP; break; case IEEE80211_AMPDU_RX_STOP: - ret = ath_rx_aggr_stop(sc, sta->addr, tid); - if (ret < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to stop RX aggregation\n", - __func__); break; case IEEE80211_AMPDU_TX_START: - ret = ath_tx_aggr_start(sc, sta->addr, tid, ssn); + ret = ath_tx_aggr_start(sc, sta, tid, ssn); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to start TX aggregation\n", - __func__); + "Unable to start TX aggregation\n"); else ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid); break; case IEEE80211_AMPDU_TX_STOP: - ret = ath_tx_aggr_stop(sc, sta->addr, tid); + ret = ath_tx_aggr_stop(sc, sta, tid); if (ret < 0) DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to stop TX aggregation\n", - __func__); + "Unable to stop TX aggregation\n"); ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid); break; + case IEEE80211_AMPDU_TX_RESUME: + ath_tx_aggr_resume(sc, sta, tid); + break; default: - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unknown AMPDU action\n", __func__); + DPRINTF(sc, ATH_DBG_FATAL, "Unknown AMPDU action\n"); } return ret; } -static int ath9k_no_fragmentation(struct ieee80211_hw *hw, u32 value) -{ - return -EOPNOTSUPP; -} - static struct ieee80211_ops ath9k_ops = { .tx = ath9k_tx, .start = ath9k_start, @@ -1654,42 +2481,97 @@ static struct ieee80211_ops ath9k_ops = { .config = ath9k_config, .config_interface = ath9k_config_interface, .configure_filter = ath9k_configure_filter, - .get_stats = NULL, .sta_notify = ath9k_sta_notify, .conf_tx = ath9k_conf_tx, - .get_tx_stats = NULL, .bss_info_changed = ath9k_bss_info_changed, - .set_tim = NULL, .set_key = ath9k_set_key, - .hw_scan = NULL, - .get_tkip_seq = NULL, - .set_rts_threshold = NULL, - .set_frag_threshold = NULL, - .set_retry_limit = NULL, .get_tsf = ath9k_get_tsf, .reset_tsf = ath9k_reset_tsf, - .tx_last_beacon = NULL, .ampdu_action = ath9k_ampdu_action, - .set_frag_threshold = ath9k_no_fragmentation, }; +static struct { + u32 version; + const char * name; +} ath_mac_bb_names[] = { + { AR_SREV_VERSION_5416_PCI, "5416" }, + { AR_SREV_VERSION_5416_PCIE, "5418" }, + { AR_SREV_VERSION_9100, "9100" }, + { AR_SREV_VERSION_9160, "9160" }, + { AR_SREV_VERSION_9280, "9280" }, + { AR_SREV_VERSION_9285, "9285" } +}; + +static struct { + u16 version; + const char * name; +} ath_rf_names[] = { + { 0, "5133" }, + { AR_RAD5133_SREV_MAJOR, "5133" }, + { AR_RAD5122_SREV_MAJOR, "5122" }, + { AR_RAD2133_SREV_MAJOR, "2133" }, + { AR_RAD2122_SREV_MAJOR, "2122" } +}; + +/* + * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown. + */ +static const char * +ath_mac_bb_name(u32 mac_bb_version) +{ + int i; + + for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) { + if (ath_mac_bb_names[i].version == mac_bb_version) { + return ath_mac_bb_names[i].name; + } + } + + return "????"; +} + +/* + * Return the RF name. "????" is returned if the RF is unknown. + */ +static const char * +ath_rf_name(u16 rf_version) +{ + int i; + + for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) { + if (ath_rf_names[i].version == rf_version) { + return ath_rf_names[i].name; + } + } + + return "????"; +} + static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { void __iomem *mem; struct ath_softc *sc; struct ieee80211_hw *hw; - const char *athname; u8 csz; u32 val; int ret = 0; + struct ath_hal *ah; if (pci_enable_device(pdev)) return -EIO; - /* XXX 32-bit addressing only */ - if (pci_set_dma_mask(pdev, 0xffffffff)) { - printk(KERN_ERR "ath_pci: 32-bit DMA not available\n"); - ret = -ENODEV; + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + + if (ret) { + printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); + goto bad; + } + + ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + + if (ret) { + printk(KERN_ERR "ath9k: 32-bit DMA consistent " + "DMA enable failed\n"); goto bad; } @@ -1746,16 +2628,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto bad2; } - hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; - - hw->wiphy->interface_modes = - BIT(NL80211_IFTYPE_AP) | - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); - SET_IEEE80211_DEV(hw, &pdev->dev); pci_set_drvdata(pdev, hw); @@ -1778,11 +2650,15 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto bad4; } - athname = ath9k_hw_probe(id->vendor, id->device); - - printk(KERN_INFO "%s: %s: mem=0x%lx, irq=%d\n", + ah = sc->sc_ah; + printk(KERN_INFO + "%s: Atheros AR%s MAC/BB Rev:%x " + "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n", wiphy_name(hw->wiphy), - athname ? athname : "Atheros ???", + ath_mac_bb_name(ah->ah_macVersion), + ah->ah_macRev, + ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)), + ah->ah_phyRev, (unsigned long)mem, pdev->irq); return 0; @@ -1803,17 +2679,10 @@ static void ath_pci_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_softc *sc = hw->priv; - enum ath9k_int status; - if (pdev->irq) { - ath9k_hw_set_interrupts(sc->sc_ah, 0); - /* clear the ISR */ - ath9k_hw_getisr(sc->sc_ah, &status); - sc->sc_flags |= SC_OP_INVALID; - free_irq(pdev->irq, sc); - } ath_detach(sc); - + if (pdev->irq) + free_irq(pdev->irq, sc); pci_iounmap(pdev, sc->mem); pci_release_region(pdev, 0); pci_disable_device(pdev); @@ -1829,7 +2698,7 @@ static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); #endif @@ -1866,7 +2735,7 @@ static int ath_pci_resume(struct pci_dev *pdev) AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) /* * check the h/w rfkill state on resume * and start the rfkill poll timer @@ -1896,11 +2765,24 @@ static struct pci_driver ath_pci_driver = { static int __init init_ath_pci(void) { + int error; + printk(KERN_INFO "%s: %s\n", dev_info, ATH_PCI_VERSION); + /* Register rate control algorithm */ + error = ath_rate_control_register(); + if (error != 0) { + printk(KERN_ERR + "Unable to register rate control algorithm: %d\n", + error); + ath_rate_control_unregister(); + return error; + } + if (pci_register_driver(&ath_pci_driver) < 0) { printk(KERN_ERR "ath_pci: No devices found, driver not installed.\n"); + ath_rate_control_unregister(); pci_unregister_driver(&ath_pci_driver); return -ENODEV; } @@ -1911,7 +2793,8 @@ module_init(init_ath_pci); static void __exit exit_ath_pci(void) { + ath_rate_control_unregister(); pci_unregister_driver(&ath_pci_driver); - printk(KERN_INFO "%s: driver unloaded\n", dev_info); + printk(KERN_INFO "%s: Driver unloaded\n", dev_info); } module_exit(exit_ath_pci); |