aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00')
-rw-r--r--drivers/net/wireless/rt2x00/Kconfig128
-rw-r--r--drivers/net/wireless/rt2x00/Makefile1
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.c58
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.h22
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c59
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.h17
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c68
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.h17
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h90
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00config.c16
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00crypto.c215
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00debug.c97
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c129
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h49
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mac.c245
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.c136
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.h82
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00reg.h19
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00rfkill.c63
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.c21
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c447
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.h38
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c457
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.h38
24 files changed, 1909 insertions, 603 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index d485a86bba7..f839ce044af 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -1,5 +1,5 @@
-config RT2X00
- tristate "Ralink driver support"
+menuconfig RT2X00
+ bool "Ralink driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable the experimental support for the Ralink drivers,
@@ -17,31 +17,6 @@ config RT2X00
if RT2X00
-config RT2X00_LIB
- tristate
-
-config RT2X00_LIB_PCI
- tristate
- select RT2X00_LIB
-
-config RT2X00_LIB_USB
- tristate
- select RT2X00_LIB
-
-config RT2X00_LIB_FIRMWARE
- boolean
- depends on RT2X00_LIB
- select FW_LOADER
-
-config RT2X00_LIB_RFKILL
- boolean
- depends on RT2X00_LIB
- select RFKILL
-
-config RT2X00_LIB_LEDS
- boolean
- depends on RT2X00_LIB && NEW_LEDS
-
config RT2400PCI
tristate "Ralink rt2400 (PCI/PCMCIA) support"
depends on PCI
@@ -53,23 +28,6 @@ config RT2400PCI
When compiled as a module, this driver will be called "rt2400pci.ko".
-config RT2400PCI_RFKILL
- bool "Ralink rt2400 rfkill support"
- depends on RT2400PCI
- select RT2X00_LIB_RFKILL
- ---help---
- This adds support for integrated rt2400 hardware that features a
- hardware button to control the radio state.
- This feature depends on the RF switch subsystem rfkill.
-
-config RT2400PCI_LEDS
- bool "Ralink rt2400 leds support"
- depends on RT2400PCI && NEW_LEDS
- select LEDS_CLASS
- select RT2X00_LIB_LEDS
- ---help---
- This adds support for led triggers provided my mac80211.
-
config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support"
depends on PCI
@@ -81,28 +39,12 @@ config RT2500PCI
When compiled as a module, this driver will be called "rt2500pci.ko".
-config RT2500PCI_RFKILL
- bool "Ralink rt2500 rfkill support"
- depends on RT2500PCI
- select RT2X00_LIB_RFKILL
- ---help---
- This adds support for integrated rt2500 hardware that features a
- hardware button to control the radio state.
- This feature depends on the RF switch subsystem rfkill.
-
-config RT2500PCI_LEDS
- bool "Ralink rt2500 leds support"
- depends on RT2500PCI && NEW_LEDS
- select LEDS_CLASS
- select RT2X00_LIB_LEDS
- ---help---
- This adds support for led triggers provided my mac80211.
-
config RT61PCI
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
+ select RT2X00_LIB_CRYPTO
select CRC_ITU_T
select EEPROM_93CX6
---help---
@@ -111,23 +53,6 @@ config RT61PCI
When compiled as a module, this driver will be called "rt61pci.ko".
-config RT61PCI_RFKILL
- bool "Ralink rt2501/rt61 rfkill support"
- depends on RT61PCI
- select RT2X00_LIB_RFKILL
- ---help---
- This adds support for integrated rt61 hardware that features a
- hardware button to control the radio state.
- This feature depends on the RF switch subsystem rfkill.
-
-config RT61PCI_LEDS
- bool "Ralink rt2501/rt61 leds support"
- depends on RT61PCI && NEW_LEDS
- select LEDS_CLASS
- select RT2X00_LIB_LEDS
- ---help---
- This adds support for led triggers provided my mac80211.
-
config RT2500USB
tristate "Ralink rt2500 (USB) support"
depends on USB
@@ -138,19 +63,12 @@ config RT2500USB
When compiled as a module, this driver will be called "rt2500usb.ko".
-config RT2500USB_LEDS
- bool "Ralink rt2500 leds support"
- depends on RT2500USB && NEW_LEDS
- select LEDS_CLASS
- select RT2X00_LIB_LEDS
- ---help---
- This adds support for led triggers provided my mac80211.
-
config RT73USB
tristate "Ralink rt2501/rt73 (USB) support"
depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_FIRMWARE
+ select RT2X00_LIB_CRYPTO
select CRC_ITU_T
---help---
This adds support for rt2501 wireless chipset family.
@@ -158,13 +76,37 @@ config RT73USB
When compiled as a module, this driver will be called "rt73usb.ko".
-config RT73USB_LEDS
- bool "Ralink rt2501/rt73 leds support"
- depends on RT73USB && NEW_LEDS
- select LEDS_CLASS
- select RT2X00_LIB_LEDS
- ---help---
- This adds support for led triggers provided my mac80211.
+config RT2X00_LIB_PCI
+ tristate
+ select RT2X00_LIB
+
+config RT2X00_LIB_USB
+ tristate
+ select RT2X00_LIB
+
+config RT2X00_LIB
+ tristate
+
+config RT2X00_LIB_FIRMWARE
+ boolean
+ select FW_LOADER
+
+config RT2X00_LIB_CRYPTO
+ boolean
+
+config RT2X00_LIB_RFKILL
+ boolean
+ default y if (RT2X00_LIB=y && RFKILL=y) || (RT2X00_LIB=m && RFKILL!=n)
+
+comment "rt2x00 rfkill support disabled due to modularized RFKILL and built-in rt2x00"
+ depends on RT2X00_LIB=y && RFKILL=m
+
+config RT2X00_LIB_LEDS
+ boolean
+ default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
+
+comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
+ depends on RT2X00_LIB=y && LEDS_CLASS=m
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index 1087dbcf1a0..917cb4f3b03 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -3,6 +3,7 @@ rt2x00lib-y += rt2x00mac.o
rt2x00lib-y += rt2x00config.o
rt2x00lib-y += rt2x00queue.o
rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o
+rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o
rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o
rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 4c0538d6099..08cb9eec16a 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -231,7 +231,7 @@ static const struct rt2x00debug rt2400pci_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2400PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -241,9 +241,9 @@ static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
}
#else
#define rt2400pci_rfkill_poll NULL
-#endif /* CONFIG_RT2400PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
-#ifdef CONFIG_RT2400PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2400pci_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -288,7 +288,7 @@ static void rt2400pci_init_led(struct rt2x00_dev *rt2x00dev,
led->led_dev.blink_set = rt2400pci_blink_set;
led->flags = LED_INITIALIZED;
}
-#endif /* CONFIG_RT2400PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
@@ -1241,7 +1241,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
if (!reg)
return IRQ_NONE;
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
/*
@@ -1374,22 +1374,22 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Store led mode, for correct led behaviour.
*/
-#ifdef CONFIG_RT2400PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
if (value == LED_MODE_TXRX_ACTIVITY)
rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
LED_TYPE_ACTIVITY);
-#endif /* CONFIG_RT2400PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2400PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2400PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be enabled.
@@ -1404,7 +1404,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* RF value list for RF2420 & RF2421
* Supports: 2.4 GHz
*/
-static const struct rf_channel rf_vals_bg[] = {
+static const struct rf_channel rf_vals_b[] = {
{ 1, 0x00022058, 0x000c1fda, 0x00000101, 0 },
{ 2, 0x00022058, 0x000c1fee, 0x00000101, 0 },
{ 3, 0x00022058, 0x000c2002, 0x00000101, 0 },
@@ -1421,10 +1421,11 @@ static const struct rf_channel rf_vals_bg[] = {
{ 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
};
-static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -1440,23 +1441,28 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
- spec->num_channels = ARRAY_SIZE(rf_vals_bg);
- spec->channels = rf_vals_bg;
+ spec->num_channels = ARRAY_SIZE(rf_vals_b);
+ spec->channels = rf_vals_b;
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ return 0;
}
static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1477,7 +1483,9 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt2400pci_probe_hw_mode(rt2x00dev);
+ retval = rt2400pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index bc556425822..bbff381ce39 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -938,19 +938,13 @@
#define MAX_TXPOWER 62
#define DEFAULT_TXPOWER 39
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
- ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
- (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- (__txpower) += MIN_TXPOWER; \
- ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \
- (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \
-})
+#define __CLAMP_TX(__txpower) \
+ clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER)
+
+#define TXPOWER_FROM_DEV(__txpower) \
+ ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)
#endif /* RT2400PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 181a146b476..ef42cc04a2d 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -231,7 +231,7 @@ static const struct rt2x00debug rt2500pci_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2500PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -241,9 +241,9 @@ static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
}
#else
#define rt2500pci_rfkill_poll NULL
-#endif /* CONFIG_RT2500PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
-#ifdef CONFIG_RT2500PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -288,7 +288,7 @@ static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev,
led->led_dev.blink_set = rt2500pci_blink_set;
led->flags = LED_INITIALIZED;
}
-#endif /* CONFIG_RT2500PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
@@ -1316,6 +1316,8 @@ static void rt2500pci_fill_rxdone(struct queue_entry *entry,
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
}
@@ -1377,7 +1379,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
if (!reg)
return IRQ_NONE;
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
/*
@@ -1531,22 +1533,22 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Store led mode, for correct led behaviour.
*/
-#ifdef CONFIG_RT2500PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
if (value == LED_MODE_TXRX_ACTIVITY)
rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
LED_TYPE_ACTIVITY);
-#endif /* CONFIG_RT2500PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2500PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2500PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be enabled.
@@ -1721,10 +1723,11 @@ static const struct rf_channel rf_vals_5222[] = {
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
-static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -1741,20 +1744,10 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
@@ -1776,6 +1769,26 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = DEFAULT_TXPOWER;
+ }
+
+ return 0;
}
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1796,7 +1809,9 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt2500pci_probe_hw_mode(rt2x00dev);
+ retval = rt2500pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index 42f376929ea..8c26bef6cf4 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -1223,17 +1223,10 @@
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT2500PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index cd5af656932..d3bf7bba611 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -288,7 +288,7 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2500USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -333,7 +333,7 @@ static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
led->led_dev.blink_set = rt2500usb_blink_set;
led->flags = LED_INITIALIZED;
}
-#endif /* CONFIG_RT2500USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
@@ -384,7 +384,7 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
- 2 * (conf->type != IEEE80211_IF_TYPE_STA));
+ 2 * (conf->type != NL80211_IFTYPE_STATION));
rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
/*
@@ -1114,8 +1114,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
- skb->len - skbdesc->desc_len);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
rt2x00_desc_write(txd, 0, word);
}
@@ -1134,7 +1133,6 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
int pipe = usb_sndbulkpipe(usb_dev, 1);
int length;
u16 reg;
- u32 word, len;
/*
* Add the descriptor in front of the skb.
@@ -1144,17 +1142,6 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
skbdesc->desc = entry->skb->data;
/*
- * Adjust the beacon databyte count. The current number is
- * calculated before this function gets called, but falsely
- * assumes that the descriptor was already present in the SKB.
- */
- rt2x00_desc_read(skbdesc->desc, 0, &word);
- len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
- len += skbdesc->desc_len;
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
- rt2x00_desc_write(skbdesc->desc, 0, word);
-
- /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1280,6 +1267,8 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
@@ -1297,7 +1286,7 @@ static void rt2500usb_beacondone(struct urb *urb)
struct queue_entry *entry = (struct queue_entry *)urb->context;
struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
- if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
return;
/*
@@ -1484,14 +1473,14 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Store led mode, for correct led behaviour.
*/
-#ifdef CONFIG_RT2500USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
if (value == LED_MODE_TXRX_ACTIVITY)
rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
LED_TYPE_ACTIVITY);
-#endif /* CONFIG_RT2500USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Check if the BBP tuning should be disabled.
@@ -1665,10 +1654,11 @@ static const struct rf_channel rf_vals_5222[] = {
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
-static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -1687,20 +1677,10 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
@@ -1722,6 +1702,26 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = DEFAULT_TXPOWER;
+ }
+
+ return 0;
}
static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1742,7 +1742,9 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt2500usb_probe_hw_mode(rt2x00dev);
+ retval = rt2500usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires the atim queue
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 4769ffeb4cc..89e5ed24e4f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -825,17 +825,10 @@
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT2500USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 8b10ea41b20..1359a376840 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -44,7 +44,7 @@
/*
* Module information.
*/
-#define DRV_VERSION "2.1.8"
+#define DRV_VERSION "2.2.1"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
@@ -53,11 +53,11 @@
*/
#define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \
printk(__kernlvl "%s -> %s: %s - " __msg, \
- wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args)
+ wiphy_name((__dev)->hw->wiphy), __func__, __lvl, ##__args)
#define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \
printk(__kernlvl "%s -> %s: %s - " __msg, \
- KBUILD_MODNAME, __FUNCTION__, __lvl, ##__args)
+ KBUILD_MODNAME, __func__, __lvl, ##__args)
#ifdef CONFIG_RT2X00_DEBUG
#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
@@ -144,6 +144,17 @@ struct rf_channel {
};
/*
+ * Channel information structure
+ */
+struct channel_info {
+ unsigned int flags;
+#define GEOGRAPHY_ALLOWED 0x00000001
+
+ short tx_power1;
+ short tx_power2;
+};
+
+/*
* Antenna setup values.
*/
struct antenna_setup {
@@ -394,10 +405,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
* @num_channels: Number of supported channels. This is used as array size
* for @tx_power_a, @tx_power_bg and @channels.
* @channels: Device/chipset specific channel values (See &struct rf_channel).
- * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL).
- * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL).
- * @tx_power_default: Default TX power value to use when either
- * @tx_power_a or @tx_power_bg is missing.
+ * @channels_info: Additional information for channels (See &struct channel_info).
*/
struct hw_mode_spec {
unsigned int supported_bands;
@@ -410,10 +418,7 @@ struct hw_mode_spec {
unsigned int num_channels;
const struct rf_channel *channels;
-
- const u8 *tx_power_a;
- const u8 *tx_power_bg;
- u8 tx_power_default;
+ const struct channel_info *channels_info;
};
/*
@@ -425,7 +430,9 @@ struct hw_mode_spec {
*/
struct rt2x00lib_conf {
struct ieee80211_conf *conf;
+
struct rf_channel rf;
+ struct channel_info channel;
struct antenna_setup ant;
@@ -452,6 +459,23 @@ struct rt2x00lib_erp {
};
/*
+ * Configuration structure for hardware encryption.
+ */
+struct rt2x00lib_crypto {
+ enum cipher cipher;
+
+ enum set_key_cmd cmd;
+ const u8 *address;
+
+ u32 bssidx;
+ u32 aid;
+
+ u8 key[16];
+ u8 tx_mic[8];
+ u8 rx_mic[8];
+};
+
+/*
* Configuration structure wrapper around the
* rt2x00 interface configuration handler.
*/
@@ -459,7 +483,7 @@ struct rt2x00intf_conf {
/*
* Interface type
*/
- enum ieee80211_if_types type;
+ enum nl80211_iftype type;
/*
* TSF sync value, this is dependant on the operation type.
@@ -547,6 +571,12 @@ struct rt2x00lib_ops {
/*
* Configuration handlers.
*/
+ int (*config_shared_key) (struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key);
+ int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key);
void (*config_filter) (struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags);
void (*config_intf) (struct rt2x00_dev *rt2x00dev,
@@ -599,17 +629,16 @@ enum rt2x00_flags {
/*
* Device state flags
*/
- DEVICE_PRESENT,
- DEVICE_REGISTERED_HW,
- DEVICE_INITIALIZED,
- DEVICE_STARTED,
- DEVICE_STARTED_SUSPEND,
- DEVICE_ENABLED_RADIO,
- DEVICE_DISABLED_RADIO_HW,
- DEVICE_DIRTY_CONFIG,
+ DEVICE_STATE_PRESENT,
+ DEVICE_STATE_REGISTERED_HW,
+ DEVICE_STATE_INITIALIZED,
+ DEVICE_STATE_STARTED,
+ DEVICE_STATE_STARTED_SUSPEND,
+ DEVICE_STATE_ENABLED_RADIO,
+ DEVICE_STATE_DISABLED_RADIO_HW,
/*
- * Driver features
+ * Driver requirements
*/
DRIVER_REQUIRE_FIRMWARE,
DRIVER_REQUIRE_BEACON_GUARD,
@@ -618,9 +647,14 @@ enum rt2x00_flags {
DRIVER_REQUIRE_DMA,
/*
- * Driver configuration
+ * Driver features
*/
CONFIG_SUPPORT_HW_BUTTON,
+ CONFIG_SUPPORT_HW_CRYPTO,
+
+ /*
+ * Driver configuration
+ */
CONFIG_FRAME_TYPE,
CONFIG_RF_SEQUENCE,
CONFIG_EXTERNAL_LNA_A,
@@ -769,6 +803,11 @@ struct rt2x00_dev {
u32 *rf;
/*
+ * LNA gain
+ */
+ short lna_gain;
+
+ /*
* USB Max frame size (for rt2500usb & rt73usb).
*/
u16 usb_maxpacket;
@@ -966,6 +1005,13 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
int mc_count, struct dev_addr_list *mc_list);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ const u8 *local_address, const u8 *address,
+ struct ieee80211_key_conf *key);
+#else
+#define rt2x00mac_set_key NULL
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index d134c3be539..4d5e87b015a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -31,7 +31,7 @@
void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
- enum ieee80211_if_types type,
+ enum nl80211_iftype type,
u8 *mac, u8 *bssid)
{
struct rt2x00intf_conf conf;
@@ -40,11 +40,11 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
conf.type = type;
switch (type) {
- case IEEE80211_IF_TYPE_IBSS:
- case IEEE80211_IF_TYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_AP:
conf.sync = TSF_SYNC_BEACON;
break;
- case IEEE80211_IF_TYPE_STA:
+ case NL80211_IFTYPE_STATION:
conf.sync = TSF_SYNC_INFRA;
break;
default:
@@ -121,7 +121,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
* Antenna setup changes require the RX to be disabled,
* else the changes will be ignored by the device.
*/
- if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
/*
@@ -136,7 +136,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
rt2x00dev->link.ant.active.rx = libconf.ant.rx;
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
- if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
}
@@ -245,6 +245,10 @@ config:
memcpy(&libconf.rf,
&rt2x00dev->spec.channels[conf->channel->hw_value],
sizeof(libconf.rf));
+
+ memcpy(&libconf.channel,
+ &rt2x00dev->spec.channels_info[conf->channel->hw_value],
+ sizeof(libconf.channel));
}
if (flags & CONFIG_UPDATE_ANTENNA) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
new file mode 100644
index 00000000000..5a858e5106c
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -0,0 +1,215 @@
+/*
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00lib
+ Abstract: rt2x00 crypto specific routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
+{
+ switch (key->alg) {
+ case ALG_WEP:
+ if (key->keylen == LEN_WEP40)
+ return CIPHER_WEP64;
+ else
+ return CIPHER_WEP128;
+ case ALG_TKIP:
+ return CIPHER_TKIP;
+ case ALG_CCMP:
+ return CIPHER_AES;
+ default:
+ return CIPHER_NONE;
+ }
+}
+
+unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
+{
+ struct ieee80211_key_conf *key = tx_info->control.hw_key;
+ unsigned int overhead = 0;
+
+ /*
+ * Extend frame length to include IV/EIV/ICV/MMIC,
+ * note that these lengths should only be added when
+ * mac80211 does not generate it.
+ */
+ overhead += key->icv_len;
+
+ if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+ overhead += key->iv_len;
+
+ if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) {
+ if (key->alg == ALG_TKIP)
+ overhead += 8;
+ }
+
+ return overhead;
+}
+
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
+
+ if (unlikely(!iv_len))
+ return;
+
+ /* Copy IV/EIV data */
+ if (iv_len >= 4)
+ memcpy(&skbdesc->iv, skb->data + header_length, 4);
+ if (iv_len >= 8)
+ memcpy(&skbdesc->eiv, skb->data + header_length + 4, 4);
+
+ /* Move ieee80211 header */
+ memmove(skb->data + iv_len, skb->data, header_length);
+
+ /* Pull buffer to correct size */
+ skb_pull(skb, iv_len);
+
+ /* IV/EIV data has officially be stripped */
+ skbdesc->flags |= FRAME_DESC_IV_STRIPPED;
+}
+
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
+ const unsigned int iv_len =
+ ((!!(skbdesc->iv)) * 4) + ((!!(skbdesc->eiv)) * 4);
+
+ if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
+ return;
+
+ skb_push(skb, iv_len);
+
+ /* Move ieee80211 header */
+ memmove(skb->data, skb->data + iv_len, header_length);
+
+ /* Copy IV/EIV data */
+ if (iv_len >= 4)
+ memcpy(skb->data + header_length, &skbdesc->iv, 4);
+ if (iv_len >= 8)
+ memcpy(skb->data + header_length + 4, &skbdesc->eiv, 4);
+
+ /* IV/EIV data has returned into the frame */
+ skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
+}
+
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+ unsigned int header_length,
+ struct rxdone_entry_desc *rxdesc)
+{
+ unsigned int payload_len = rxdesc->size - header_length;
+ unsigned int iv_len;
+ unsigned int icv_len;
+ unsigned int transfer = 0;
+
+ /*
+ * WEP64/WEP128: Provides IV & ICV
+ * TKIP: Provides IV/EIV & ICV
+ * AES: Provies IV/EIV & ICV
+ */
+ switch (rxdesc->cipher) {
+ case CIPHER_WEP64:
+ case CIPHER_WEP128:
+ iv_len = 4;
+ icv_len = 4;
+ break;
+ case CIPHER_TKIP:
+ iv_len = 8;
+ icv_len = 4;
+ break;
+ case CIPHER_AES:
+ iv_len = 8;
+ icv_len = 8;
+ break;
+ default:
+ /* Unsupport type */
+ return;
+ }
+
+ /*
+ * Make room for new data, note that we increase both
+ * headsize and tailsize when required. The tailsize is
+ * only needed when ICV data needs to be inserted and
+ * the padding is smaller then the ICV data.
+ * When alignment requirements is greater then the
+ * ICV data we must trim the skb to the correct size
+ * because we need to remove the extra bytes.
+ */
+ skb_push(skb, iv_len + align);
+ if (align < icv_len)
+ skb_put(skb, icv_len - align);
+ else if (align > icv_len)
+ skb_trim(skb, rxdesc->size + iv_len + icv_len);
+
+ /* Move ieee80211 header */
+ memmove(skb->data + transfer,
+ skb->data + transfer + iv_len + align,
+ header_length);
+ transfer += header_length;
+
+ /* Copy IV data */
+ if (iv_len >= 4) {
+ memcpy(skb->data + transfer, &rxdesc->iv, 4);
+ transfer += 4;
+ }
+
+ /* Copy EIV data */
+ if (iv_len >= 8) {
+ memcpy(skb->data + transfer, &rxdesc->eiv, 4);
+ transfer += 4;
+ }
+
+ /* Move payload */
+ if (align) {
+ memmove(skb->data + transfer,
+ skb->data + transfer + align,
+ payload_len);
+ }
+
+ /*
+ * NOTE: Always count the payload as transfered,
+ * even when alignment was set to zero. This is required
+ * for determining the correct offset for the ICV data.
+ */
+ transfer += payload_len;
+
+ /* Copy ICV data */
+ if (icv_len >= 4) {
+ memcpy(skb->data + transfer, &rxdesc->icv, 4);
+ /*
+ * AES appends 8 bytes, we can't fill the upper
+ * 4 bytes, but mac80211 doesn't care about what
+ * we provide here anyway and strips it immediately.
+ */
+ transfer += icv_len;
+ }
+
+ /* IV/EIV/ICV has been inserted into frame */
+ rxdesc->size = transfer;
+ rxdesc->flags &= ~RX_FLAG_IV_STRIPPED;
+}
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 6bee1d611bb..5cf4c859e39 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -35,6 +35,13 @@
#define MAX_LINE_LENGTH 64
+struct rt2x00debug_crypto {
+ unsigned long success;
+ unsigned long icv_error;
+ unsigned long mic_error;
+ unsigned long key_error;
+};
+
struct rt2x00debug_intf {
/*
* Pointer to driver structure where
@@ -63,6 +70,7 @@ struct rt2x00debug_intf {
* - queue folder
* - frame dump file
* - queue stats file
+ * - crypto stats file
*/
struct dentry *driver_folder;
struct dentry *driver_entry;
@@ -80,6 +88,7 @@ struct rt2x00debug_intf {
struct dentry *queue_folder;
struct dentry *queue_frame_dump_entry;
struct dentry *queue_stats_entry;
+ struct dentry *crypto_stats_entry;
/*
* The frame dump file only allows a single reader,
@@ -98,6 +107,12 @@ struct rt2x00debug_intf {
wait_queue_head_t frame_dump_waitqueue;
/*
+ * HW crypto statistics.
+ * All statistics are stored seperately per cipher type.
+ */
+ struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
+
+ /*
* Driver and chipset files will use a data buffer
* that has been created in advance. This will simplify
* the code since we can use the debugfs functions.
@@ -114,6 +129,25 @@ struct rt2x00debug_intf {
unsigned int offset_rf;
};
+void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+ enum cipher cipher, enum rx_crypto status)
+{
+ struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
+
+ if (cipher == CIPHER_TKIP_NO_MIC)
+ cipher = CIPHER_TKIP;
+ if (cipher == CIPHER_NONE || cipher > CIPHER_MAX)
+ return;
+
+ /* Remove CIPHER_NONE index */
+ cipher--;
+
+ intf->crypto_stats[cipher].success += (status == RX_CRYPTO_SUCCESS);
+ intf->crypto_stats[cipher].icv_error += (status == RX_CRYPTO_FAIL_ICV);
+ intf->crypto_stats[cipher].mic_error += (status == RX_CRYPTO_FAIL_MIC);
+ intf->crypto_stats[cipher].key_error += (status == RX_CRYPTO_FAIL_KEY);
+}
+
void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
enum rt2x00_dump_type type, struct sk_buff *skb)
{
@@ -327,6 +361,59 @@ static const struct file_operations rt2x00debug_fop_queue_stats = {
.release = rt2x00debug_file_release,
};
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+static ssize_t rt2x00debug_read_crypto_stats(struct file *file,
+ char __user *buf,
+ size_t length,
+ loff_t *offset)
+{
+ struct rt2x00debug_intf *intf = file->private_data;
+ char *name[] = { "WEP64", "WEP128", "TKIP", "AES" };
+ char *data;
+ char *temp;
+ size_t size;
+ unsigned int i;
+
+ if (*offset)
+ return 0;
+
+ data = kzalloc((1 + CIPHER_MAX)* MAX_LINE_LENGTH, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ temp = data;
+ temp += sprintf(data, "cipher\tsuccess\ticv err\tmic err\tkey err\n");
+
+ for (i = 0; i < CIPHER_MAX; i++) {
+ temp += sprintf(temp, "%s\t%lu\t%lu\t%lu\t%lu\n", name[i],
+ intf->crypto_stats[i].success,
+ intf->crypto_stats[i].icv_error,
+ intf->crypto_stats[i].mic_error,
+ intf->crypto_stats[i].key_error);
+ }
+
+ size = strlen(data);
+ size = min(size, length);
+
+ if (copy_to_user(buf, data, size)) {
+ kfree(data);
+ return -EFAULT;
+ }
+
+ kfree(data);
+
+ *offset += size;
+ return size;
+}
+
+static const struct file_operations rt2x00debug_fop_crypto_stats = {
+ .owner = THIS_MODULE,
+ .read = rt2x00debug_read_crypto_stats,
+ .open = rt2x00debug_file_open,
+ .release = rt2x00debug_file_release,
+};
+#endif
+
#define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \
static ssize_t rt2x00debug_read_##__name(struct file *file, \
char __user *buf, \
@@ -569,6 +656,13 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
debugfs_create_file("queue", S_IRUSR, intf->queue_folder,
intf, &rt2x00debug_fop_queue_stats);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ intf->crypto_stats_entry =
+ debugfs_create_file("crypto", S_IRUGO, intf->queue_folder,
+ intf, &rt2x00debug_fop_crypto_stats);
+#endif
+
return;
exit:
@@ -587,6 +681,9 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
skb_queue_purge(&intf->frame_dump_skbqueue);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ debugfs_remove(intf->crypto_stats_entry);
+#endif
debugfs_remove(intf->queue_stats_entry);
debugfs_remove(intf->queue_frame_dump_entry);
debugfs_remove(intf->queue_folder);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index f42283ad7b0..86840e3585e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -34,7 +34,7 @@
*/
void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
/*
@@ -94,8 +94,8 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
* Don't enable the radio twice.
* And check if the hardware button has been disabled.
*/
- if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
- test_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags))
+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
+ test_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags))
return 0;
/*
@@ -117,7 +117,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00leds_led_radio(rt2x00dev, true);
rt2x00led_led_activity(rt2x00dev, true);
- __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags);
+ set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
/*
* Enable RX.
@@ -134,7 +134,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
{
- if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
/*
@@ -354,7 +354,7 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
* When the radio is shutting down we should
* immediately cease all link tuning.
*/
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
/*
@@ -431,7 +431,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
* note that in the spinlock protected area above the delayed_flags
* have been cleared correctly.
*/
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
if (delayed_flags & DELAYED_UPDATE_BEACON)
@@ -467,8 +467,8 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
struct rt2x00_dev *rt2x00dev = data;
struct rt2x00_intf *intf = vif_to_intf(vif);
- if (vif->type != IEEE80211_IF_TYPE_AP &&
- vif->type != IEEE80211_IF_TYPE_IBSS)
+ if (vif->type != NL80211_IFTYPE_AP &&
+ vif->type != NL80211_IFTYPE_ADHOC)
return;
/*
@@ -484,7 +484,7 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
@@ -508,6 +508,15 @@ void rt2x00lib_txdone(struct queue_entry *entry,
rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
/*
+ * If the IV/EIV data was stripped from the frame before it was
+ * passed to the hardware, we should now reinsert it again because
+ * mac80211 will expect the the same data to be present it the
+ * frame as it was passed to us.
+ */
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ rt2x00crypto_tx_insert_iv(entry->skb);
+
+ /*
* Send frame to debugfs immediately, after this call is completed
* we are going to overwrite the skb->cb array.
*/
@@ -563,7 +572,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry);
- __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
/*
@@ -585,7 +594,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
struct ieee80211_supported_band *sband;
struct ieee80211_hdr *hdr;
const struct rt2x00_rate *rate;
- unsigned int header_size;
+ unsigned int header_length;
unsigned int align;
unsigned int i;
int idx = -1;
@@ -613,10 +622,19 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
* The data behind the ieee80211 header must be
* aligned on a 4 byte boundary.
*/
- header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
- align = ((unsigned long)(entry->skb->data + header_size)) & 3;
+ header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+ align = ((unsigned long)(entry->skb->data + header_length)) & 3;
- if (align) {
+ /*
+ * Hardware might have stripped the IV/EIV/ICV data,
+ * in that case it is possible that the data was
+ * provided seperately (through hardware descriptor)
+ * in which case we should reinsert the data into the frame.
+ */
+ if ((rxdesc.flags & RX_FLAG_IV_STRIPPED)) {
+ rt2x00crypto_rx_insert_iv(entry->skb, align,
+ header_length, &rxdesc);
+ } else if (align) {
skb_push(entry->skb, align);
/* Move entire frame in 1 command */
memmove(entry->skb->data, entry->skb->data + align,
@@ -635,7 +653,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
(rate->plcp == rxdesc.signal)) ||
- (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
+ ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) &&
(rate->bitrate == rxdesc.signal))) {
idx = i;
break;
@@ -657,6 +675,10 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
(rxdesc.dev_flags & RXDONE_MY_BSS))
rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi);
+ rt2x00debug_update_crypto(rt2x00dev,
+ rxdesc.cipher,
+ rxdesc.cipher_status);
+
rt2x00dev->link.qual.rx_success++;
rx_status->mactime = rxdesc.timestamp;
@@ -796,7 +818,6 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
struct ieee80211_rate *rates;
unsigned int num_rates;
unsigned int i;
- unsigned char tx_power;
num_rates = 0;
if (spec->supported_rates & SUPPORT_RATE_CCK)
@@ -822,20 +843,9 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
* Initialize Channel list.
*/
for (i = 0; i < spec->num_channels; i++) {
- if (spec->channels[i].channel <= 14) {
- if (spec->tx_power_bg)
- tx_power = spec->tx_power_bg[i];
- else
- tx_power = spec->tx_power_default;
- } else {
- if (spec->tx_power_a)
- tx_power = spec->tx_power_a[i];
- else
- tx_power = spec->tx_power_default;
- }
-
rt2x00lib_channel(&channels[i],
- spec->channels[i].channel, tx_power, i);
+ spec->channels[i].channel,
+ spec->channels_info[i].tx_power1, i);
}
/*
@@ -878,7 +888,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
{
- if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags))
+ if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
ieee80211_unregister_hw(rt2x00dev->hw);
if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
@@ -887,6 +897,8 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
}
+
+ kfree(rt2x00dev->spec.channels_info);
}
static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -894,6 +906,9 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
struct hw_mode_spec *spec = &rt2x00dev->spec;
int status;
+ if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
+ return 0;
+
/*
* Initialize HW modes.
*/
@@ -915,7 +930,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
return status;
}
- __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags);
+ set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
return 0;
}
@@ -925,7 +940,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
*/
static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
{
- if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+ if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
return;
/*
@@ -948,7 +963,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
{
int status;
- if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+ if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
return 0;
/*
@@ -967,7 +982,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
return status;
}
- __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags);
+ set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
/*
* Register the extra components.
@@ -981,7 +996,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
{
int retval;
- if (test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
return 0;
/*
@@ -999,28 +1014,18 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
if (retval)
return retval;
- /*
- * Enable radio.
- */
- retval = rt2x00lib_enable_radio(rt2x00dev);
- if (retval) {
- rt2x00lib_uninitialize(rt2x00dev);
- return retval;
- }
-
rt2x00dev->intf_ap_count = 0;
rt2x00dev->intf_sta_count = 0;
rt2x00dev->intf_associated = 0;
- __set_bit(DEVICE_STARTED, &rt2x00dev->flags);
- __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+ set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
return 0;
}
void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
return;
/*
@@ -1032,8 +1037,6 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
rt2x00dev->intf_ap_count = 0;
rt2x00dev->intf_sta_count = 0;
rt2x00dev->intf_associated = 0;
-
- __clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
}
/*
@@ -1049,6 +1052,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
*/
rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
+ rt2x00dev->hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
/*
* Let the driver probe the device to detect the capabilities.
*/
@@ -1088,7 +1096,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
rt2x00rfkill_allocate(rt2x00dev);
rt2x00debug_register(rt2x00dev);
- __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+ set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
return 0;
@@ -1101,7 +1109,7 @@ EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
{
- __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+ clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
/*
* Disable radio.
@@ -1146,14 +1154,15 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
int retval;
NOTICE(rt2x00dev, "Going to sleep.\n");
- __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
/*
* Only continue if mac80211 has open interfaces.
*/
- if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+ !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
goto exit;
- __set_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags);
+
+ set_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags);
/*
* Disable radio.
@@ -1203,8 +1212,8 @@ static void rt2x00lib_resume_intf(void *data, u8 *mac,
/*
* Master or Ad-hoc mode require a new beacon update.
*/
- if (vif->type == IEEE80211_IF_TYPE_AP ||
- vif->type == IEEE80211_IF_TYPE_IBSS)
+ if (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC)
intf->delayed_flags |= DELAYED_UPDATE_BEACON;
spin_unlock(&intf->lock);
@@ -1225,7 +1234,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
/*
* Only continue if mac80211 had open interfaces.
*/
- if (!__test_and_clear_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags))
+ if (!test_and_clear_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags))
return 0;
/*
@@ -1252,7 +1261,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
/*
* We are ready again to receive requests from mac80211.
*/
- __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+ set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
/*
* It is possible that during that mac80211 has attempted
@@ -1272,7 +1281,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
return 0;
exit:
- rt2x00lib_disable_radio(rt2x00dev);
+ rt2x00lib_stop(rt2x00dev);
rt2x00lib_uninitialize(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index c5fb3a72cf3..797eb619aa0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -88,7 +88,7 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev);
*/
void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
- enum ieee80211_if_types type,
+ enum nl80211_iftype type,
u8 *mac, u8 *bssid);
void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
@@ -181,6 +181,8 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
enum rt2x00_dump_type type, struct sk_buff *skb);
+void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+ enum cipher cipher, enum rx_crypto status);
#else
static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
{
@@ -195,9 +197,54 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb)
{
}
+
+static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+ enum cipher cipher,
+ enum rx_crypto status)
+{
+}
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
/*
+ * Crypto handlers.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
+unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info);
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len);
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb);
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+ unsigned int header_length,
+ struct rxdone_entry_desc *rxdesc);
+#else
+static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
+{
+ return CIPHER_NONE;
+}
+
+static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
+{
+ return 0;
+}
+
+static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
+ unsigned int iv_len)
+{
+}
+
+static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+{
+}
+
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
+ unsigned int align,
+ unsigned int header_length,
+ struct rxdone_entry_desc *rxdesc)
+{
+}
+#endif
+
+/*
* RFkill handlers.
*/
#ifdef CONFIG_RT2X00_LIB_RFKILL
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index d0650738863..2c6cc5c374f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -36,21 +36,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb);
struct ieee80211_tx_info *rts_info;
struct sk_buff *skb;
- int size;
+ unsigned int data_length;
+ int retval = 0;
if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
- size = sizeof(struct ieee80211_cts);
+ data_length = sizeof(struct ieee80211_cts);
else
- size = sizeof(struct ieee80211_rts);
+ data_length = sizeof(struct ieee80211_rts);
- skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom);
- if (!skb) {
+ skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom);
+ if (unlikely(!skb)) {
WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n");
- return NETDEV_TX_BUSY;
+ return -ENOMEM;
}
skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
- skb_put(skb, size);
+ skb_put(skb, data_length);
/*
* Copy TX information over from original frame to
@@ -63,7 +64,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
*/
memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
rts_info = IEEE80211_SKB_CB(skb);
- rts_info->control.hw_key = NULL;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -73,22 +73,33 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
else
rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
+ skb->do_not_encrypt = 1;
+
+ /*
+ * RTS/CTS frame should use the length of the frame plus any
+ * encryption overhead that will be added by the hardware.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (!frag_skb->do_not_encrypt)
+ data_length += rt2x00crypto_tx_overhead(tx_info);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
- frag_skb->data, size, tx_info,
+ frag_skb->data, data_length, tx_info,
(struct ieee80211_cts *)(skb->data));
else
ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif,
- frag_skb->data, size, tx_info,
+ frag_skb->data, data_length, tx_info,
(struct ieee80211_rts *)(skb->data));
- if (rt2x00queue_write_tx_frame(queue, skb)) {
+ retval = rt2x00queue_write_tx_frame(queue, skb);
+ if (retval) {
dev_kfree_skb_any(skb);
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
- return NETDEV_TX_BUSY;
}
- return NETDEV_TX_OK;
+ return retval;
}
int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
@@ -106,11 +117,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
* Note that we can only stop the TX queues inside the TX path
* due to possible race conditions in mac80211.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
- ieee80211_stop_queues(hw);
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ goto exit_fail;
/*
* Determine which queue to put packet on.
@@ -141,26 +149,25 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS |
IEEE80211_TX_CTL_USE_CTS_PROTECT)) &&
!rt2x00dev->ops->hw->set_rts_threshold) {
- if (rt2x00queue_available(queue) <= 1) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
- }
-
- if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
- }
- }
+ if (rt2x00queue_available(queue) <= 1)
+ goto exit_fail;
- if (rt2x00queue_write_tx_frame(queue, skb)) {
- ieee80211_stop_queue(rt2x00dev->hw, qid);
- return NETDEV_TX_BUSY;
+ if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb))
+ goto exit_fail;
}
+ if (rt2x00queue_write_tx_frame(queue, skb))
+ goto exit_fail;
+
if (rt2x00queue_threshold(queue))
ieee80211_stop_queue(rt2x00dev->hw, qid);
return NETDEV_TX_OK;
+
+ exit_fail:
+ ieee80211_stop_queue(rt2x00dev->hw, qid);
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(rt2x00mac_tx);
@@ -168,7 +175,7 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
return rt2x00lib_start(rt2x00dev);
@@ -179,7 +186,7 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return;
rt2x00lib_stop(rt2x00dev);
@@ -199,12 +206,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
* Don't allow interfaces to be added
* the device has disappeared.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
- !test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+ !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
return -ENODEV;
switch (conf->type) {
- case IEEE80211_IF_TYPE_AP:
+ case NL80211_IFTYPE_AP:
/*
* We don't support mixed combinations of
* sta and ap interfaces.
@@ -220,8 +227,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
return -ENOBUFS;
break;
- case IEEE80211_IF_TYPE_STA:
- case IEEE80211_IF_TYPE_IBSS:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
/*
* We don't support mixed combinations of
* sta and ap interfaces.
@@ -249,7 +256,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
*/
for (i = 0; i < queue->limit; i++) {
entry = &queue->entries[i];
- if (!__test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags))
+ if (!test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags))
break;
}
@@ -261,7 +268,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
* increase interface count and start initialization.
*/
- if (conf->type == IEEE80211_IF_TYPE_AP)
+ if (conf->type == NL80211_IFTYPE_AP)
rt2x00dev->intf_ap_count++;
else
rt2x00dev->intf_sta_count++;
@@ -270,7 +277,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
spin_lock_init(&intf->seqlock);
intf->beacon = entry;
- if (conf->type == IEEE80211_IF_TYPE_AP)
+ if (conf->type == NL80211_IFTYPE_AP)
memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
@@ -303,12 +310,12 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
* either the device has disappeared or when
* no interface is present.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
- (conf->type == IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_ap_count) ||
- (conf->type != IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_sta_count))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+ (conf->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) ||
+ (conf->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count))
return;
- if (conf->type == IEEE80211_IF_TYPE_AP)
+ if (conf->type == NL80211_IFTYPE_AP)
rt2x00dev->intf_ap_count--;
else
rt2x00dev->intf_sta_count--;
@@ -317,59 +324,59 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
* Release beacon entry so it is available for
* new interfaces again.
*/
- __clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags);
+ clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags);
/*
* Make sure the bssid and mac address registers
* are cleared to prevent false ACKing of frames.
*/
rt2x00lib_config_intf(rt2x00dev, intf,
- IEEE80211_IF_TYPE_INVALID, NULL, NULL);
+ NL80211_IFTYPE_UNSPECIFIED, NULL, NULL);
}
EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- int force_reconfig;
+ int radio_on;
+ int status;
/*
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
/*
- * Check if we need to disable the radio,
- * if this is not the case, at least the RX must be disabled.
+ * Only change device state when the radio is enabled. It does not
+ * matter what parameters we have configured when the radio is disabled
+ * because we won't be able to send or receive anyway. Also note that
+ * some configuration parameters (e.g. channel and antenna values) can
+ * only be set when the radio is enabled.
*/
- if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) {
- if (!conf->radio_enabled)
- rt2x00lib_disable_radio(rt2x00dev);
- else
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
- }
+ radio_on = test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
+ if (conf->radio_enabled) {
+ /* For programming the values, we have to turn RX off */
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
- /*
- * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
- * been started and the configuration must be forced upon the hardware.
- * Otherwise registers will not be intialized correctly and could
- * result in non-working hardware because essential registers aren't
- * initialized.
- */
- force_reconfig =
- __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+ /* Enable the radio */
+ status = rt2x00lib_enable_radio(rt2x00dev);
+ if (unlikely(status))
+ return status;
- rt2x00lib_config(rt2x00dev, conf, force_reconfig);
+ /*
+ * When we've just turned on the radio, we want to reprogram
+ * everything to ensure a consistent state
+ */
+ rt2x00lib_config(rt2x00dev, conf, !radio_on);
- /*
- * Reenable RX only if the radio should be on.
- */
- if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ /* Turn RX back on */
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
- else if (conf->radio_enabled)
- return rt2x00lib_enable_radio(rt2x00dev);
+ } else {
+ /* Disable the radio */
+ rt2x00lib_disable_radio(rt2x00dev);
+ }
return 0;
}
@@ -388,7 +395,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
*/
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
spin_lock(&intf->lock);
@@ -467,6 +474,91 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ const u8 *local_address, const u8 *address,
+ struct ieee80211_key_conf *key)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ int (*set_key) (struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key);
+ struct rt2x00lib_crypto crypto;
+
+ if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+ return -EOPNOTSUPP;
+ else if (key->keylen > 32)
+ return -ENOSPC;
+
+ memset(&crypto, 0, sizeof(crypto));
+
+ /*
+ * When in STA mode, bssidx is always 0 otherwise local_address[5]
+ * contains the bss number, see BSS_ID_MASK comments for details.
+ */
+ if (rt2x00dev->intf_sta_count)
+ crypto.bssidx = 0;
+ else
+ crypto.bssidx =
+ local_address[5] & (rt2x00dev->ops->max_ap_intf - 1);
+
+ crypto.cipher = rt2x00crypto_key_to_cipher(key);
+ if (crypto.cipher == CIPHER_NONE)
+ return -EOPNOTSUPP;
+
+ crypto.cmd = cmd;
+ crypto.address = address;
+
+ if (crypto.cipher == CIPHER_TKIP) {
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY)
+ memcpy(&crypto.key,
+ &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY],
+ sizeof(crypto.key));
+
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY)
+ memcpy(&crypto.tx_mic,
+ &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
+ sizeof(crypto.tx_mic));
+
+ if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY)
+ memcpy(&crypto.rx_mic,
+ &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
+ sizeof(crypto.rx_mic));
+ } else
+ memcpy(&crypto.key, &key->key[0], key->keylen);
+
+ /*
+ * Each BSS has a maximum of 4 shared keys.
+ * Shared key index values:
+ * 0) BSS0 key0
+ * 1) BSS0 key1
+ * ...
+ * 4) BSS1 key0
+ * ...
+ * 8) BSS2 key0
+ * ...
+ * Both pairwise as shared key indeces are determined by
+ * driver. This is required because the hardware requires
+ * keys to be assigned in correct order (When key 1 is
+ * provided but key 0 is not, then the key is not found
+ * by the hardware during RX).
+ */
+ if (cmd == SET_KEY)
+ key->hw_key_idx = 0;
+
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ set_key = rt2x00dev->ops->lib->config_pairwise_key;
+ else
+ set_key = rt2x00dev->ops->lib->config_shared_key;
+
+ if (!set_key)
+ return -EOPNOTSUPP;
+
+ return set_key(rt2x00dev, &crypto, key);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_set_key);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
@@ -575,10 +667,11 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
queue->cw_max = 10; /* cw_min: 2^10 = 1024. */
queue->aifs = params->aifs;
+ queue->txop = params->txop;
INFO(rt2x00dev,
- "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",
- queue_idx, queue->cw_min, queue->cw_max, queue->aifs);
+ "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d.\n",
+ queue_idx, queue->cw_min, queue->cw_max, queue->aifs, queue->txop);
return 0;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 898cdd7f57d..1676ac48479 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -33,10 +33,11 @@
struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
struct queue_entry *entry)
{
- unsigned int frame_size;
- unsigned int reserved_size;
struct sk_buff *skb;
struct skb_frame_desc *skbdesc;
+ unsigned int frame_size;
+ unsigned int head_size = 0;
+ unsigned int tail_size = 0;
/*
* The frame size includes descriptor size, because the
@@ -49,16 +50,32 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
* this means we need at least 3 bytes for moving the frame
* into the correct offset.
*/
- reserved_size = 4;
+ head_size = 4;
+
+ /*
+ * For IV/EIV/ICV assembly we must make sure there is
+ * at least 8 bytes bytes available in headroom for IV/EIV
+ * and 4 bytes for ICV data as tailroon.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ head_size += 8;
+ tail_size += 4;
+ }
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
/*
* Allocate skbuffer.
*/
- skb = dev_alloc_skb(frame_size + reserved_size);
+ skb = dev_alloc_skb(frame_size + head_size + tail_size);
if (!skb)
return NULL;
- skb_reserve(skb, reserved_size);
+ /*
+ * Make sure we not have a frame with the requested bytes
+ * available in the head and tail.
+ */
+ skb_reserve(skb, head_size);
skb_put(skb, frame_size);
/*
@@ -83,8 +100,21 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
+ /*
+ * If device has requested headroom, we should make sure that
+ * is also mapped to the DMA so it can be used for transfering
+ * additional descriptor information to the hardware.
+ */
+ skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+
+ skbdesc->skb_dma =
+ dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+ /*
+ * Restore data pointer to original location again.
+ */
+ skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+
skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
}
EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb);
@@ -100,7 +130,12 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
}
if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) {
- dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len,
+ /*
+ * Add headroom to the skb length, it has been removed
+ * by the driver, but it was actually mapped to DMA.
+ */
+ dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
+ skb->len + rt2x00dev->hw->extra_tx_headroom,
DMA_TO_DEVICE);
skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
}
@@ -120,7 +155,6 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
- struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
struct ieee80211_rate *rate =
ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@@ -140,7 +174,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
txdesc->cw_max = entry->queue->cw_max;
txdesc->aifs = entry->queue->aifs;
- /* Data length should be extended with 4 bytes for CRC */
+ /* Data length + CRC + IV/EIV/ICV/MMIC (when using encryption) */
data_length = entry->skb->len + 4;
/*
@@ -149,6 +183,35 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
__set_bit(ENTRY_TXD_ACK, &txdesc->flags);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) &&
+ !entry->skb->do_not_encrypt) {
+ struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
+
+ __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags);
+
+ txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key);
+
+ if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);
+
+ txdesc->key_idx = hw_key->hw_key_idx;
+ txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+ /*
+ * Extend frame length to include all encryption overhead
+ * that will be added by the hardware.
+ */
+ data_length += rt2x00crypto_tx_overhead(tx_info);
+
+ if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+ __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);
+
+ if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
+ __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags);
+ }
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
/*
* Check if this is a RTS/CTS frame
*/
@@ -214,16 +277,22 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
* sequence counter given by mac80211.
*/
if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
- spin_lock_irqsave(&intf->seqlock, irqflags);
+ if (likely(tx_info->control.vif)) {
+ struct rt2x00_intf *intf;
- if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
- intf->seqno += 0x10;
- hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+ intf = vif_to_intf(tx_info->control.vif);
- spin_unlock_irqrestore(&intf->seqlock, irqflags);
+ spin_lock_irqsave(&intf->seqlock, irqflags);
- __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+ if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+ intf->seqno += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+
+ spin_unlock_irqrestore(&intf->seqlock, irqflags);
+
+ __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+ }
}
/*
@@ -305,11 +374,12 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
struct txentry_desc txdesc;
struct skb_frame_desc *skbdesc;
+ unsigned int iv_len;
if (unlikely(rt2x00queue_full(queue)))
return -EINVAL;
- if (__test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
+ if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
ERROR(queue->rt2x00dev,
"Arrived at non-free entry in the non-full queue %d.\n"
"Please file bug report to %s.\n",
@@ -326,21 +396,42 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
rt2x00queue_create_tx_descriptor(entry, &txdesc);
/*
- * skb->cb array is now ours and we are free to use it.
+ * All information is retreived from the skb->cb array,
+ * now we should claim ownership of the driver part of that
+ * array.
*/
skbdesc = get_skb_frame_desc(entry->skb);
memset(skbdesc, 0, sizeof(*skbdesc));
skbdesc->entry = entry;
+ /*
+ * When hardware encryption is supported, and this frame
+ * is to be encrypted, we should strip the IV/EIV data from
+ * the frame so we can provide it to the driver seperately.
+ */
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
+ !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags) &&
+ (IEEE80211_SKB_CB(skb)->control.hw_key != NULL)) {
+ iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len;
+ rt2x00crypto_tx_remove_iv(skb, iv_len);
+ }
+
+ /*
+ * It could be possible that the queue was corrupted and this
+ * call failed. Just drop the frame, we cannot rollback and pass
+ * the frame to mac80211 because the skb->cb has now been tainted.
+ */
if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
- __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
- return -EIO;
+ clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ dev_kfree_skb_any(entry->skb);
+ entry->skb = NULL;
+ return 0;
}
if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
rt2x00queue_map_txskb(queue->rt2x00dev, skb);
- __set_bit(ENTRY_DATA_PENDING, &entry->flags);
+ set_bit(ENTRY_DATA_PENDING, &entry->flags);
rt2x00queue_index_inc(queue, Q_INDEX);
rt2x00queue_write_tx_descriptor(entry, &txdesc);
@@ -653,6 +744,7 @@ static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
queue->rt2x00dev = rt2x00dev;
queue->qid = qid;
+ queue->txop = 0;
queue->aifs = 2;
queue->cw_min = 5;
queue->cw_max = 10;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index ff78e52ce43..9dbf04f0f04 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -87,10 +87,13 @@ enum data_queue_qid {
*
* @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
* @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
+ * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by
+ * mac80211 but was stripped for processing by the driver.
*/
enum skb_frame_desc_flags {
- SKBDESC_DMA_MAPPED_RX = (1 << 0),
- SKBDESC_DMA_MAPPED_TX = (1 << 1),
+ SKBDESC_DMA_MAPPED_RX = 1 << 0,
+ SKBDESC_DMA_MAPPED_TX = 1 << 1,
+ FRAME_DESC_IV_STRIPPED = 1 << 2,
};
/**
@@ -104,6 +107,8 @@ enum skb_frame_desc_flags {
* @desc: Pointer to descriptor part of the frame.
* Note that this pointer could point to something outside
* of the scope of the skb->data pointer.
+ * @iv: IV data used during encryption/decryption.
+ * @eiv: EIV data used during encryption/decryption.
* @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
* @entry: The entry to which this sk buffer belongs.
*/
@@ -113,6 +118,9 @@ struct skb_frame_desc {
unsigned int desc_len;
void *desc;
+ __le32 iv;
+ __le32 eiv;
+
dma_addr_t skb_dma;
struct queue_entry *entry;
@@ -132,13 +140,14 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb)
/**
* enum rxdone_entry_desc_flags: Flags for &struct rxdone_entry_desc
*
- * @RXDONE_SIGNAL_PLCP: Does the signal field contain the plcp value,
- * or does it contain the bitrate itself.
+ * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value.
+ * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value.
* @RXDONE_MY_BSS: Does this frame originate from device's BSS.
*/
enum rxdone_entry_desc_flags {
RXDONE_SIGNAL_PLCP = 1 << 0,
- RXDONE_MY_BSS = 1 << 1,
+ RXDONE_SIGNAL_BITRATE = 1 << 1,
+ RXDONE_MY_BSS = 1 << 2,
};
/**
@@ -152,7 +161,11 @@ enum rxdone_entry_desc_flags {
* @size: Data size of the received frame.
* @flags: MAC80211 receive flags (See &enum mac80211_rx_flags).
* @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags).
-
+ * @cipher: Cipher type used during decryption.
+ * @cipher_status: Decryption status.
+ * @iv: IV data used during decryption.
+ * @eiv: EIV data used during decryption.
+ * @icv: ICV data used during decryption.
*/
struct rxdone_entry_desc {
u64 timestamp;
@@ -161,6 +174,12 @@ struct rxdone_entry_desc {
int size;
int flags;
int dev_flags;
+ u8 cipher;
+ u8 cipher_status;
+
+ __le32 iv;
+ __le32 eiv;
+ __le32 icv;
};
/**
@@ -206,6 +225,10 @@ struct txdone_entry_desc {
* @ENTRY_TXD_BURST: This frame belongs to the same burst event.
* @ENTRY_TXD_ACK: An ACK is required for this frame.
* @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used.
+ * @ENTRY_TXD_ENCRYPT: This frame should be encrypted.
+ * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared).
+ * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware.
+ * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware.
*/
enum txentry_desc_flags {
ENTRY_TXD_RTS_FRAME,
@@ -218,6 +241,10 @@ enum txentry_desc_flags {
ENTRY_TXD_BURST,
ENTRY_TXD_ACK,
ENTRY_TXD_RETRY_MODE,
+ ENTRY_TXD_ENCRYPT,
+ ENTRY_TXD_ENCRYPT_PAIRWISE,
+ ENTRY_TXD_ENCRYPT_IV,
+ ENTRY_TXD_ENCRYPT_MMIC,
};
/**
@@ -236,6 +263,9 @@ enum txentry_desc_flags {
* @ifs: IFS value.
* @cw_min: cwmin value.
* @cw_max: cwmax value.
+ * @cipher: Cipher type used for encryption.
+ * @key_idx: Key index used for encryption.
+ * @iv_offset: Position where IV should be inserted by hardware.
*/
struct txentry_desc {
unsigned long flags;
@@ -252,6 +282,10 @@ struct txentry_desc {
short ifs;
short cw_min;
short cw_max;
+
+ enum cipher cipher;
+ u16 key_idx;
+ u16 iv_offset;
};
/**
@@ -335,6 +369,7 @@ enum queue_index {
* @length: Number of frames in queue.
* @index: Index pointers to entry positions in the queue,
* use &enum queue_index to get a specific index field.
+ * @txop: maximum burst time.
* @aifs: The aifs value for outgoing frames (field ignored in RX queue).
* @cw_min: The cw min value for outgoing frames (field ignored in RX queue).
* @cw_max: The cw max value for outgoing frames (field ignored in RX queue).
@@ -354,6 +389,7 @@ struct data_queue {
unsigned short length;
unsigned short index[Q_INDEX_MAX];
+ unsigned short txop;
unsigned short aifs;
unsigned short cw_min;
unsigned short cw_max;
@@ -484,25 +520,51 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
}
/**
- * rt2x00_desc_read - Read a word from the hardware descriptor.
+ * _rt2x00_desc_read - Read a word from the hardware descriptor.
+ * @desc: Base descriptor address
+ * @word: Word index from where the descriptor should be read.
+ * @value: Address where the descriptor value should be written into.
+ */
+static inline void _rt2x00_desc_read(__le32 *desc, const u8 word, __le32 *value)
+{
+ *value = desc[word];
+}
+
+/**
+ * rt2x00_desc_read - Read a word from the hardware descriptor, this
+ * function will take care of the byte ordering.
* @desc: Base descriptor address
* @word: Word index from where the descriptor should be read.
* @value: Address where the descriptor value should be written into.
*/
static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value)
{
- *value = le32_to_cpu(desc[word]);
+ __le32 tmp;
+ _rt2x00_desc_read(desc, word, &tmp);
+ *value = le32_to_cpu(tmp);
+}
+
+/**
+ * rt2x00_desc_write - write a word to the hardware descriptor, this
+ * function will take care of the byte ordering.
+ * @desc: Base descriptor address
+ * @word: Word index from where the descriptor should be written.
+ * @value: Value that should be written into the descriptor.
+ */
+static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value)
+{
+ desc[word] = value;
}
/**
- * rt2x00_desc_write - wrote a word to the hardware descriptor.
+ * rt2x00_desc_write - write a word to the hardware descriptor.
* @desc: Base descriptor address
* @word: Word index from where the descriptor should be written.
* @value: Value that should be written into the descriptor.
*/
static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value)
{
- desc[word] = cpu_to_le32(value);
+ _rt2x00_desc_write(desc, word, cpu_to_le32(value));
}
#endif /* RT2X00QUEUE_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 2ea7866abd5..c2fba7c9f05 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -27,6 +27,16 @@
#define RT2X00REG_H
/*
+ * RX crypto status
+ */
+enum rx_crypto {
+ RX_CRYPTO_SUCCESS = 0,
+ RX_CRYPTO_FAIL_ICV = 1,
+ RX_CRYPTO_FAIL_MIC = 2,
+ RX_CRYPTO_FAIL_KEY = 3,
+};
+
+/*
* Antenna values
*/
enum antenna {
@@ -104,7 +114,14 @@ enum cipher {
*/
CIPHER_CKIP64 = 5,
CIPHER_CKIP128 = 6,
- CIPHER_TKIP_NO_MIC = 7,
+ CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */
+
+/*
+ * Max cipher type.
+ * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128
+ * are excluded due to limitations in mac80211.
+ */
+ CIPHER_MAX = 4,
};
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index 04b29716d35..c3f53a92180 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -41,20 +41,19 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
/*
* Only continue if there are enabled interfaces.
*/
- if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
return 0;
if (state == RFKILL_STATE_UNBLOCKED) {
- INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n");
- __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags);
+ INFO(rt2x00dev, "RFKILL event: enabling radio.\n");
+ clear_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags);
retval = rt2x00lib_enable_radio(rt2x00dev);
} else if (state == RFKILL_STATE_SOFT_BLOCKED) {
- INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n");
- __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags);
+ INFO(rt2x00dev, "RFKILL event: disabling radio.\n");
+ set_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags);
rt2x00lib_disable_radio(rt2x00dev);
} else {
- WARNING(rt2x00dev, "Received unexpected rfkill state %d.\n",
- state);
+ WARNING(rt2x00dev, "RFKILL event: unknown state %d.\n", state);
}
return retval;
@@ -64,7 +63,12 @@ static int rt2x00rfkill_get_state(void *data, enum rfkill_state *state)
{
struct rt2x00_dev *rt2x00dev = data;
- *state = rt2x00dev->rfkill->state;
+ /*
+ * rfkill_poll reports 1 when the key has been pressed and the
+ * radio should be blocked.
+ */
+ *state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ?
+ RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED;
return 0;
}
@@ -73,19 +77,18 @@ static void rt2x00rfkill_poll(struct work_struct *work)
{
struct rt2x00_dev *rt2x00dev =
container_of(work, struct rt2x00_dev, rfkill_work.work);
- int state;
+ enum rfkill_state state;
- if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
+ if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state) ||
+ !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return;
/*
- * rfkill_poll reports 1 when the key has been pressed and the
- * radio should be blocked.
+ * Poll latest state and report it to rfkill who should sort
+ * out if the state should be toggled or not.
*/
- state = !rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ?
- RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
-
- rfkill_force_state(rt2x00dev->rfkill, state);
+ if (!rt2x00rfkill_get_state(rt2x00dev, &state))
+ rfkill_force_state(rt2x00dev->rfkill, state);
queue_delayed_work(rt2x00dev->hw->workqueue,
&rt2x00dev->rfkill_work, RFKILL_POLL_INTERVAL);
@@ -93,8 +96,8 @@ static void rt2x00rfkill_poll(struct work_struct *work)
void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) ||
- !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
+ if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
+ test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
return;
if (rfkill_register(rt2x00dev->rfkill)) {
@@ -114,7 +117,7 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) ||
+ if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
return;
@@ -127,21 +130,30 @@ void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ struct device *dev = wiphy_dev(rt2x00dev->hw->wiphy);
+
+ if (test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
return;
- rt2x00dev->rfkill =
- rfkill_allocate(wiphy_dev(rt2x00dev->hw->wiphy), RFKILL_TYPE_WLAN);
+ rt2x00dev->rfkill = rfkill_allocate(dev, RFKILL_TYPE_WLAN);
if (!rt2x00dev->rfkill) {
ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n");
return;
}
+ __set_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state);
+
rt2x00dev->rfkill->name = rt2x00dev->ops->name;
rt2x00dev->rfkill->data = rt2x00dev;
- rt2x00dev->rfkill->state = -1;
rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio;
- rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state;
+ if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) {
+ rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state;
+ rt2x00dev->rfkill->state =
+ rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ?
+ RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED;
+ } else {
+ rt2x00dev->rfkill->state = RFKILL_STATE_UNBLOCKED;
+ }
INIT_DELAYED_WORK(&rt2x00dev->rfkill_work, rt2x00rfkill_poll);
@@ -150,8 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) ||
- !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
+ if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags))
return;
cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 2050227ea53..b73a7e0aeed 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -163,16 +163,11 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct txdone_entry_desc txdesc;
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
/*
- * Remove the descriptor data from the buffer.
- */
- skb_pull(entry->skb, entry->queue->desc_size);
-
- /*
* Obtain the status about this packet.
* Note that when the status is 0 it does not mean the
* frame was send out correctly. It only means the frame
@@ -224,6 +219,12 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry)
entry->skb->data, length,
rt2x00usb_interrupt_txdone, entry);
+ /*
+ * Make sure the skb->data pointer points to the frame, not the
+ * descriptor.
+ */
+ skb_pull(entry->skb, entry->queue->desc_size);
+
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);
@@ -232,7 +233,7 @@ static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
{
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
- if (__test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags))
+ if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags))
usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
}
@@ -283,7 +284,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
u8 rxd[32];
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
@@ -293,7 +294,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
* a problem.
*/
if (urb->actual_length < entry->queue->desc_size || urb->status) {
- __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
usb_submit_urb(urb, GFP_ATOMIC);
return;
}
@@ -361,7 +362,7 @@ void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev,
entry->skb->data, entry->skb->len,
rt2x00usb_interrupt_rxdone, entry);
- __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
}
EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 087e90b328c..a461620b489 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -38,6 +38,13 @@
#include "rt61pci.h"
/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 0;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
* Register access.
* BBP and RF register require indirect register access,
* and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
@@ -156,7 +163,7 @@ rf_write:
rt2x00_rf_write(rt2x00dev, word, value);
}
-#ifdef CONFIG_RT61PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
/*
* This function is only called from rt61pci_led_brightness()
* make gcc happy by placing this function inside the
@@ -188,7 +195,7 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
}
-#endif /* CONFIG_RT61PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
{
@@ -264,7 +271,7 @@ static const struct rt2x00debug rt61pci_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT61PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -274,9 +281,9 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
}
#else
#define rt61pci_rfkill_poll NULL
-#endif /* CONFIG_RT61PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
-#ifdef CONFIG_RT61PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt61pci_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -341,11 +348,209 @@ static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev,
led->led_dev.blink_set = rt61pci_blink_set;
led->flags = LED_INITIALIZED;
}
-#endif /* CONFIG_RT61PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
*/
+static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_key_entry key_entry;
+ struct rt2x00_field32 field;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for shared keys. We have 1 register
+ * with key valid bits. The goal is simple, read
+ * the register, if that is full we have no slots
+ * left.
+ * Note that each BSS is allowed to have up to 4
+ * shared keys, so put a mask over the allowed
+ * entries.
+ */
+ mask = (0xf << crypto->bssidx);
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
+ reg &= mask;
+
+ if (reg && reg == mask)
+ return -ENOSPC;
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &key_entry, sizeof(key_entry));
+
+ /*
+ * The cipher types are stored over 2 registers.
+ * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+ * bssidx 1 and 2 keys are stored in SEC_CSR5.
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
+ if (key->hw_key_idx < 8) {
+ field.bit_offset = (3 * key->hw_key_idx);
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR1, &reg);
+ rt2x00_set_field32(&reg, field, crypto->cipher);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg);
+ } else {
+ field.bit_offset = (3 * (key->hw_key_idx - 8));
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR5, &reg);
+ rt2x00_set_field32(&reg, field, crypto->cipher);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg);
+ }
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR0 contains only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ mask = 1 << key->hw_key_idx;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg);
+
+ return 0;
+}
+
+static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_pairwise_ta_entry addr_entry;
+ struct hw_key_entry key_entry;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for pairwise keys. We have 2 registers
+ * with key valid bits. The goal is simple, read
+ * the first register, if that is full move to
+ * the next register.
+ * When both registers are full, we drop the key,
+ * otherwise we use the first invalid entry.
+ */
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
+ if (reg && reg == ~0) {
+ key->hw_key_idx = 32;
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
+ if (reg && reg == ~0)
+ return -ENOSPC;
+ }
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ memset(&addr_entry, 0, sizeof(addr_entry));
+ memcpy(&addr_entry, crypto->address, ETH_ALEN);
+ addr_entry.cipher = crypto->cipher;
+
+ reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &key_entry, sizeof(key_entry));
+
+ reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+ rt2x00pci_register_multiwrite(rt2x00dev, reg,
+ &addr_entry, sizeof(addr_entry));
+
+ /*
+ * Enable pairwise lookup table for given BSS idx,
+ * without this received frames will not be decrypted
+ * by the hardware.
+ */
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR4, &reg);
+ reg |= (1 << crypto->bssidx);
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg);
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ if (key->hw_key_idx < 32) {
+ mask = 1 << key->hw_key_idx;
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg);
+ } else {
+ mask = 1 << (key->hw_key_idx - 32);
+
+ rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg);
+ }
+
+ return 0;
+}
+
static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags)
{
@@ -440,6 +645,30 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
}
+
+static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u16 eeprom;
+ short lna_gain = 0;
+
+ if (libconf->band == IEEE80211_BAND_2GHZ) {
+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
+ } else {
+ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
+ }
+
+ rt2x00dev->lna_gain = lna_gain;
+}
+
static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev,
const int basic_rate_mask)
{
@@ -758,6 +987,9 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf,
const unsigned int flags)
{
+ /* Always recalculate LNA gain before changing configuration */
+ rt61pci_config_lna_gain(rt2x00dev, libconf);
+
if (flags & CONFIG_UPDATE_PHYMODE)
rt61pci_config_phymode(rt2x00dev, libconf->basic_rates);
if (flags & CONFIG_UPDATE_CHANNEL)
@@ -1246,16 +1478,6 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
- rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
- rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
- rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
- rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
-
- rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
- rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
- rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
- rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
-
/*
* Clear all beacons
* For the Beacon base registers we only need to clear
@@ -1533,8 +1755,8 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
* TX descriptor initialization
*/
static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
- struct sk_buff *skb,
- struct txentry_desc *txdesc)
+ struct sk_buff *skb,
+ struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txd = skbdesc->desc;
@@ -1548,7 +1770,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
@@ -1561,6 +1783,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
rt2x00_desc_write(txd, 2, word);
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+ _rt2x00_desc_write(txd, 3, skbdesc->iv);
+ _rt2x00_desc_write(txd, 4, skbdesc->eiv);
+ }
+
rt2x00_desc_read(txd, 5, &word);
rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid);
rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
@@ -1595,11 +1822,15 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
+ rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+ test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+ test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
rt2x00_set_field32(&word, TXD_W0_BURST,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
rt2x00_desc_write(txd, 0, word);
}
@@ -1676,40 +1907,27 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
*/
static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
{
- u16 eeprom;
- u8 offset;
+ u8 offset = rt2x00dev->lna_gain;
u8 lna;
lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
switch (lna) {
case 3:
- offset = 90;
+ offset += 90;
break;
case 2:
- offset = 74;
+ offset += 74;
break;
case 1:
- offset = 64;
+ offset += 64;
break;
default:
return 0;
}
if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
- offset += 14;
-
if (lna == 3 || lna == 2)
offset += 10;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
- } else {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
- offset += 14;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
}
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
@@ -1718,6 +1936,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
static void rt61pci_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct queue_entry_priv_pci *entry_priv = entry->priv_data;
u32 word0;
u32 word1;
@@ -1728,6 +1947,38 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry,
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ rxdesc->cipher =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+ }
+
+ if (rxdesc->cipher != CIPHER_NONE) {
+ _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv);
+ _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv);
+ _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv);
+
+ /*
+ * Hardware has stripped IV/EIV data from 802.11 frame during
+ * decryption. It has provided the data seperately but rt2x00lib
+ * should decide if it should be reinserted.
+ */
+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+ /*
+ * FIXME: Legacy driver indicates that the frame does
+ * contain the Michael Mic. Unfortunately, in rt2x00
+ * the MIC seems to be missing completely...
+ */
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
+
/*
* Obtain the status about this packet.
* When frame was received with an OFDM bitrate,
@@ -1735,11 +1986,13 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry,
* a CCK bitrate the signal is the rate in 100kbit/s.
*/
rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
+ rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
}
@@ -1860,7 +2113,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
if (!reg && !reg_mcu)
return IRQ_NONE;
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
/*
@@ -2060,10 +2313,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT61PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT61PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Read frequency offset and RF programming sequence.
@@ -2121,7 +2374,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* If the eeprom value is invalid,
* switch to default led mode.
*/
-#ifdef CONFIG_RT61PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
@@ -2155,7 +2408,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_A));
-#endif /* CONFIG_RT61PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
return 0;
}
@@ -2274,10 +2527,11 @@ static const struct rf_channel rf_vals_seq[] = {
{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
};
-static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -2294,20 +2548,10 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
spec->num_channels = 14;
@@ -2321,13 +2565,28 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
+ }
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
- spec->tx_power_a = txpower;
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
+
+ return 0;
}
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -2348,13 +2607,17 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt61pci_probe_hw_mode(rt2x00dev);
+ retval = rt61pci_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires firmware and DMA mapped skbs.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
/*
* Set the rssi offset.
@@ -2381,6 +2644,63 @@ static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
return 0;
}
+static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct data_queue *queue;
+ struct rt2x00_field32 field;
+ int retval;
+ u32 reg;
+
+ /*
+ * First pass the configuration through rt2x00lib, that will
+ * update the queue settings and validate the input. After that
+ * we are free to update the registers based on the value
+ * in the queue parameter.
+ */
+ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+ if (retval)
+ return retval;
+
+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+ /* Update WMM TXOP register */
+ if (queue_idx < 2) {
+ field.bit_offset = queue_idx * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
+ rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
+ } else if (queue_idx < 4) {
+ field.bit_offset = (queue_idx - 2) * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
+ rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
+ }
+
+ /* Update WMM registers */
+ field.bit_offset = queue_idx * 4;
+ field.bit_mask = 0xf << field.bit_offset;
+
+ rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->aifs);
+ rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg);
+
+ rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_min);
+ rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg);
+
+ rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_max);
+ rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg);
+
+ return 0;
+}
+
static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -2404,10 +2724,11 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt61pci_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
- .conf_tx = rt2x00mac_conf_tx,
+ .conf_tx = rt61pci_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt61pci_get_tsf,
};
@@ -2432,6 +2753,8 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.write_beacon = rt61pci_write_beacon,
.kick_tx_queue = rt61pci_kick_tx_queue,
.fill_rxdone = rt61pci_fill_rxdone,
+ .config_shared_key = rt61pci_config_shared_key,
+ .config_pairwise_key = rt61pci_config_pairwise_key,
.config_filter = rt61pci_config_filter,
.config_intf = rt61pci_config_intf,
.config_erp = rt61pci_config_erp,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 1004d5b899e..8ec1451308c 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -134,6 +134,16 @@
#define PAIRWISE_KEY_TABLE_BASE 0x1200
#define PAIRWISE_TA_TABLE_BASE 0x1a00
+#define SHARED_KEY_ENTRY(__idx) \
+ ( SHARED_KEY_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+ ( PAIRWISE_KEY_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_TA_ENTRY(__idx) \
+ ( PAIRWISE_TA_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
+
struct hw_key_entry {
u8 key[16];
u8 tx_mic[8];
@@ -142,7 +152,8 @@ struct hw_key_entry {
struct hw_pairwise_ta_entry {
u8 address[6];
- u8 reserved[2];
+ u8 cipher;
+ u8 reserved;
} __attribute__ ((packed));
/*
@@ -662,6 +673,10 @@ struct hw_pairwise_ta_entry {
* SEC_CSR4: Pairwise key table lookup control.
*/
#define SEC_CSR4 0x30b0
+#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
+#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
+#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
+#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
/*
* SEC_CSR5: shared key table security mode register.
@@ -1428,8 +1443,10 @@ struct hw_pairwise_ta_entry {
/*
* Word4
+ * ICV: Received ICV of originally encrypted.
+ * NOTE: This is a guess, the official definition is "reserved"
*/
-#define RXD_W4_RESERVED FIELD32(0xffffffff)
+#define RXD_W4_ICV FIELD32(0xffffffff)
/*
* the above 20-byte is called RXINFO and will be DMAed to MAC RX block
@@ -1465,17 +1482,10 @@ struct hw_pairwise_ta_entry {
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT61PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 9761eaaa08b..934f8e03c5a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -37,6 +37,13 @@
#include "rt73usb.h"
/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 0;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
* Register access.
* All access to the CSR registers will go through the methods
* rt73usb_register_read and rt73usb_register_write.
@@ -285,7 +292,7 @@ static const struct rt2x00debug rt73usb_rt2x00debug = {
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT73USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt73usb_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -352,11 +359,224 @@ static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev,
led->led_dev.blink_set = rt73usb_blink_set;
led->flags = LED_INITIALIZED;
}
-#endif /* CONFIG_RT73USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
*/
+static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_key_entry key_entry;
+ struct rt2x00_field32 field;
+ int timeout;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for shared keys. We have 1 register
+ * with key valid bits. The goal is simple, read
+ * the register, if that is full we have no slots
+ * left.
+ * Note that each BSS is allowed to have up to 4
+ * shared keys, so put a mask over the allowed
+ * entries.
+ */
+ mask = (0xf << crypto->bssidx);
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR0, &reg);
+ reg &= mask;
+
+ if (reg && reg == mask)
+ return -ENOSPC;
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, reg,
+ &key_entry,
+ sizeof(key_entry),
+ timeout);
+
+ /*
+ * The cipher types are stored over 2 registers.
+ * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+ * bssidx 1 and 2 keys are stored in SEC_CSR5.
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
+ if (key->hw_key_idx < 8) {
+ field.bit_offset = (3 * key->hw_key_idx);
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR1, &reg);
+ rt2x00_set_field32(&reg, field, crypto->cipher);
+ rt73usb_register_write(rt2x00dev, SEC_CSR1, reg);
+ } else {
+ field.bit_offset = (3 * (key->hw_key_idx - 8));
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR5, &reg);
+ rt2x00_set_field32(&reg, field, crypto->cipher);
+ rt73usb_register_write(rt2x00dev, SEC_CSR5, reg);
+ }
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR0 contains only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ mask = 1 << key->hw_key_idx;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR0, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR0, reg);
+
+ return 0;
+}
+
+static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_pairwise_ta_entry addr_entry;
+ struct hw_key_entry key_entry;
+ int timeout;
+ u32 mask;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * rt2x00lib can't determine the correct free
+ * key_idx for pairwise keys. We have 2 registers
+ * with key valid bits. The goal is simple, read
+ * the first register, if that is full move to
+ * the next register.
+ * When both registers are full, we drop the key,
+ * otherwise we use the first invalid entry.
+ */
+ rt73usb_register_read(rt2x00dev, SEC_CSR2, &reg);
+ if (reg && reg == ~0) {
+ key->hw_key_idx = 32;
+ rt73usb_register_read(rt2x00dev, SEC_CSR3, &reg);
+ if (reg && reg == ~0)
+ return -ENOSPC;
+ }
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+
+ /*
+ * Upload key to hardware
+ */
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, reg,
+ &key_entry,
+ sizeof(key_entry),
+ timeout);
+
+ /*
+ * Send the address and cipher type to the hardware register.
+ * This data fits within the CSR cache size, so we can use
+ * rt73usb_register_multiwrite() directly.
+ */
+ memset(&addr_entry, 0, sizeof(addr_entry));
+ memcpy(&addr_entry, crypto->address, ETH_ALEN);
+ addr_entry.cipher = crypto->cipher;
+
+ reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+ rt73usb_register_multiwrite(rt2x00dev, reg,
+ &addr_entry, sizeof(addr_entry));
+
+ /*
+ * Enable pairwise lookup table for given BSS idx,
+ * without this received frames will not be decrypted
+ * by the hardware.
+ */
+ rt73usb_register_read(rt2x00dev, SEC_CSR4, &reg);
+ reg |= (1 << crypto->bssidx);
+ rt73usb_register_write(rt2x00dev, SEC_CSR4, reg);
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ }
+
+ /*
+ * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+ * a particular key is valid. Because using the FIELD32()
+ * defines directly will cause a lot of overhead we use
+ * a calculation to determine the correct bit directly.
+ */
+ if (key->hw_key_idx < 32) {
+ mask = 1 << key->hw_key_idx;
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR2, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR2, reg);
+ } else {
+ mask = 1 << (key->hw_key_idx - 32);
+
+ rt73usb_register_read(rt2x00dev, SEC_CSR3, &reg);
+ if (crypto->cmd == SET_KEY)
+ reg |= mask;
+ else if (crypto->cmd == DISABLE_KEY)
+ reg &= ~mask;
+ rt73usb_register_write(rt2x00dev, SEC_CSR3, reg);
+ }
+
+ return 0;
+}
+
static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags)
{
@@ -451,6 +671,26 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
}
+static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u16 eeprom;
+ short lna_gain = 0;
+
+ if (libconf->band == IEEE80211_BAND_2GHZ) {
+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+ lna_gain += 14;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
+ } else {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
+ lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
+ }
+
+ rt2x00dev->lna_gain = lna_gain;
+}
+
static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
const int basic_rate_mask)
{
@@ -705,6 +945,9 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf,
const unsigned int flags)
{
+ /* Always recalculate LNA gain before changing configuration */
+ rt73usb_config_lna_gain(rt2x00dev, libconf);
+
if (flags & CONFIG_UPDATE_PHYMODE)
rt73usb_config_phymode(rt2x00dev, libconf->basic_rates);
if (flags & CONFIG_UPDATE_CHANNEL)
@@ -1034,16 +1277,6 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
- rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
- rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
- rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
- rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
-
- rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
- rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
- rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
- rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
-
rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
@@ -1265,8 +1498,8 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
* TX descriptor initialization
*/
static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
- struct sk_buff *skb,
- struct txentry_desc *txdesc)
+ struct sk_buff *skb,
+ struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txd = skbdesc->desc;
@@ -1280,7 +1513,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
rt2x00_desc_write(txd, 1, word);
@@ -1292,6 +1525,11 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
rt2x00_desc_write(txd, 2, word);
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+ _rt2x00_desc_write(txd, 3, skbdesc->iv);
+ _rt2x00_desc_write(txd, 4, skbdesc->eiv);
+ }
+
rt2x00_desc_read(txd, 5, &word);
rt2x00_set_field32(&word, TXD_W5_TX_POWER,
TXPOWER_TO_DEV(rt2x00dev->tx_power));
@@ -1313,12 +1551,15 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
- skb->len - skbdesc->desc_len);
+ rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+ test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+ test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
rt2x00_set_field32(&word, TXD_W0_BURST2,
test_bit(ENTRY_TXD_BURST, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
rt2x00_desc_write(txd, 0, word);
}
@@ -1331,7 +1572,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
unsigned int beacon_base;
u32 reg;
- u32 word, len;
/*
* Add the descriptor in front of the skb.
@@ -1341,17 +1581,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
skbdesc->desc = entry->skb->data;
/*
- * Adjust the beacon databyte count. The current number is
- * calculated before this function gets called, but falsely
- * assumes that the descriptor was already present in the SKB.
- */
- rt2x00_desc_read(skbdesc->desc, 0, &word);
- len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
- len += skbdesc->desc_len;
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
- rt2x00_desc_write(skbdesc->desc, 0, word);
-
- /*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
@@ -1422,20 +1651,19 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
*/
static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
{
- u16 eeprom;
- u8 offset;
+ u8 offset = rt2x00dev->lna_gain;
u8 lna;
lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
switch (lna) {
case 3:
- offset = 90;
+ offset += 90;
break;
case 2:
- offset = 74;
+ offset += 74;
break;
case 1:
- offset = 64;
+ offset += 64;
break;
default:
return 0;
@@ -1451,15 +1679,6 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
else if (lna == 2)
offset += 8;
}
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
- } else {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
- offset += 14;
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
- offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
}
return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
@@ -1468,6 +1687,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
static void rt73usb_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
__le32 *rxd = (__le32 *)entry->skb->data;
u32 word0;
@@ -1489,6 +1709,38 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ rxdesc->cipher =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+ }
+
+ if (rxdesc->cipher != CIPHER_NONE) {
+ _rt2x00_desc_read(rxd, 2, &rxdesc->iv);
+ _rt2x00_desc_read(rxd, 3, &rxdesc->eiv);
+ _rt2x00_desc_read(rxd, 4, &rxdesc->icv);
+
+ /*
+ * Hardware has stripped IV/EIV data from 802.11 frame during
+ * decryption. It has provided the data seperately but rt2x00lib
+ * should decide if it should be reinserted.
+ */
+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+ /*
+ * FIXME: Legacy driver indicates that the frame does
+ * contain the Michael Mic. Unfortunately, in rt2x00
+ * the MIC seems to be missing completely...
+ */
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
+
/*
* Obtain the status about this packet.
* When frame was received with an OFDM bitrate,
@@ -1496,11 +1748,13 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
* a CCK bitrate the signal is the rate in 100kbit/s.
*/
rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1);
+ rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
@@ -1678,7 +1932,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Store led settings, for correct led behaviour.
*/
-#ifdef CONFIG_RT73USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
@@ -1711,7 +1965,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
rt2x00_get_field16(eeprom,
EEPROM_LED_POLARITY_RDY_A));
-#endif /* CONFIG_RT73USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
return 0;
}
@@ -1852,10 +2106,11 @@ static const struct rf_channel rf_vals_5225_2527[] = {
};
-static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
- u8 *txpower;
+ struct channel_info *info;
+ char *tx_power;
unsigned int i;
/*
@@ -1872,20 +2127,10 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
EEPROM_MAC_ADDR_0));
/*
- * Convert tx_power array in eeprom.
- */
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
- /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
- spec->tx_power_a = NULL;
- spec->tx_power_bg = txpower;
- spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
@@ -1903,14 +2148,26 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->channels = rf_vals_5225_2527;
}
- if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
- rt2x00_rf(&rt2x00dev->chip, RF5226)) {
- txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 0; i < 14; i++)
- txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
- spec->tx_power_a = txpower;
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+ for (i = 0; i < 14; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+ if (spec->num_channels > 14) {
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+ for (i = 14; i < spec->num_channels; i++)
+ info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
+
+ return 0;
}
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1931,13 +2188,17 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
- rt73usb_probe_hw_mode(rt2x00dev);
+ retval = rt73usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
/*
* This device requires firmware.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
/*
* Set the rssi offset.
@@ -1964,6 +2225,63 @@ static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
return 0;
}
+static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct data_queue *queue;
+ struct rt2x00_field32 field;
+ int retval;
+ u32 reg;
+
+ /*
+ * First pass the configuration through rt2x00lib, that will
+ * update the queue settings and validate the input. After that
+ * we are free to update the registers based on the value
+ * in the queue parameter.
+ */
+ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+ if (retval)
+ return retval;
+
+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+ /* Update WMM TXOP register */
+ if (queue_idx < 2) {
+ field.bit_offset = queue_idx * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
+ rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
+ } else if (queue_idx < 4) {
+ field.bit_offset = (queue_idx - 2) * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
+ rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
+ }
+
+ /* Update WMM registers */
+ field.bit_offset = queue_idx * 4;
+ field.bit_mask = 0xf << field.bit_offset;
+
+ rt73usb_register_read(rt2x00dev, AIFSN_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->aifs);
+ rt73usb_register_write(rt2x00dev, AIFSN_CSR, reg);
+
+ rt73usb_register_read(rt2x00dev, CWMIN_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_min);
+ rt73usb_register_write(rt2x00dev, CWMIN_CSR, reg);
+
+ rt73usb_register_read(rt2x00dev, CWMAX_CSR, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_max);
+ rt73usb_register_write(rt2x00dev, CWMAX_CSR, reg);
+
+ return 0;
+}
+
#if 0
/*
* Mac80211 demands get_tsf must be atomic.
@@ -1997,10 +2315,11 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt73usb_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
- .conf_tx = rt2x00mac_conf_tx,
+ .conf_tx = rt73usb_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt73usb_get_tsf,
};
@@ -2024,6 +2343,8 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
.get_tx_data_len = rt73usb_get_tx_data_len,
.kick_tx_queue = rt73usb_kick_tx_queue,
.fill_rxdone = rt73usb_fill_rxdone,
+ .config_shared_key = rt73usb_config_shared_key,
+ .config_pairwise_key = rt73usb_config_pairwise_key,
.config_filter = rt73usb_config_filter,
.config_intf = rt73usb_config_intf,
.config_erp = rt73usb_config_erp,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 14849350101..868386c457f 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -92,6 +92,16 @@
#define PAIRWISE_KEY_TABLE_BASE 0x1200
#define PAIRWISE_TA_TABLE_BASE 0x1a00
+#define SHARED_KEY_ENTRY(__idx) \
+ ( SHARED_KEY_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+ ( PAIRWISE_KEY_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_TA_ENTRY(__idx) \
+ ( PAIRWISE_TA_TABLE_BASE + \
+ ((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
+
struct hw_key_entry {
u8 key[16];
u8 tx_mic[8];
@@ -100,7 +110,8 @@ struct hw_key_entry {
struct hw_pairwise_ta_entry {
u8 address[6];
- u8 reserved[2];
+ u8 cipher;
+ u8 reserved;
} __attribute__ ((packed));
/*
@@ -563,6 +574,10 @@ struct hw_pairwise_ta_entry {
* SEC_CSR4: Pairwise key table lookup control.
*/
#define SEC_CSR4 0x30b0
+#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
+#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
+#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
+#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
/*
* SEC_CSR5: shared key table security mode register.
@@ -1010,8 +1025,10 @@ struct hw_pairwise_ta_entry {
/*
* Word4
+ * ICV: Received ICV of originally encrypted.
+ * NOTE: This is a guess, the official definition is "reserved"
*/
-#define RXD_W4_RESERVED FIELD32(0xffffffff)
+#define RXD_W4_ICV FIELD32(0xffffffff)
/*
* the above 20-byte is called RXINFO and will be DMAed to MAC RX block
@@ -1033,17 +1050,10 @@ struct hw_pairwise_ta_entry {
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
-#define TXPOWER_FROM_DEV(__txpower) \
-({ \
- ((__txpower) > MAX_TXPOWER) ? \
- DEFAULT_TXPOWER : (__txpower); \
-})
-
-#define TXPOWER_TO_DEV(__txpower) \
-({ \
- ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
- (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
- (__txpower)); \
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+ (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT73USB_H */