aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/irda/Kconfig10
-rw-r--r--drivers/net/irda/Makefile1
-rw-r--r--drivers/net/irda/pxaficp_ir.c871
3 files changed, 882 insertions, 0 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index ca5914091d3..d54156f11e6 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -400,5 +400,15 @@ config VIA_FIR
To compile it as a module, choose M here: the module will be called
via-ircc.
+config PXA_FICP
+ tristate "Intel PXA2xx Internal FICP"
+ depends on ARCH_PXA && IRDA
+ help
+ Say Y or M here if you want to build support for the PXA2xx
+ built-in IRDA interface which can support both SIR and FIR.
+ This driver relies on platform specific helper routines so
+ available capabilities may vary from one PXA2xx target to
+ another.
+
endmenu
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 29a8bd812b2..e7a8b7f7f5d 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_SMC_IRCC_FIR) += smsc-ircc2.o
obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
obj-$(CONFIG_VIA_FIR) += via-ircc.o
+obj-$(CONFIG_PXA_FICP) += pxaficp_ir.o
# Old dongle drivers for old SIR drivers
obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o
obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
new file mode 100644
index 00000000000..aef80f5e7c9
--- /dev/null
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -0,0 +1,871 @@
+/*
+ * linux/drivers/net/irda/pxaficp_ir.c
+ *
+ * Based on sa1100_ir.c by Russell King
+ *
+ * Changes copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Infra-red driver (SIR/FIR) for the PXA2xx embedded microprocessor
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/delay.h>
+#include <asm/hardware.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa-regs.h>
+
+#ifdef CONFIG_MACH_MAINSTONE
+#include <asm/arch/mainstone.h>
+#endif
+
+#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
+#define IrSR_RXPL_POS_IS_ZERO 0x0
+#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
+#define IrSR_TXPL_POS_IS_ZERO 0x0
+#define IrSR_XMODE_PULSE_1_6 (1<<2)
+#define IrSR_XMODE_PULSE_3_16 0x0
+#define IrSR_RCVEIR_IR_MODE (1<<1)
+#define IrSR_RCVEIR_UART_MODE 0x0
+#define IrSR_XMITIR_IR_MODE (1<<0)
+#define IrSR_XMITIR_UART_MODE 0x0
+
+#define IrSR_IR_RECEIVE_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_IR_MODE | \
+ IrSR_XMITIR_UART_MODE)
+
+#define IrSR_IR_TRANSMIT_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_UART_MODE | \
+ IrSR_XMITIR_IR_MODE)
+
+struct pxa_irda {
+ int speed;
+ int newspeed;
+ unsigned long last_oscr;
+
+ unsigned char *dma_rx_buff;
+ unsigned char *dma_tx_buff;
+ dma_addr_t dma_rx_buff_phy;
+ dma_addr_t dma_tx_buff_phy;
+ unsigned int dma_tx_buff_len;
+ int txdma;
+ int rxdma;
+
+ struct net_device_stats stats;
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ iobuff_t tx_buff;
+ iobuff_t rx_buff;
+
+ struct device *dev;
+ struct pxaficp_platform_data *pdata;
+};
+
+
+#define IS_FIR(si) ((si)->speed >= 4000000)
+#define IRDA_FRAME_SIZE_LIMIT 2047
+
+inline static void pxa_irda_fir_dma_rx_start(struct pxa_irda *si)
+{
+ DCSR(si->rxdma) = DCSR_NODESC;
+ DSADR(si->rxdma) = __PREG(ICDR);
+ DTADR(si->rxdma) = si->dma_rx_buff_phy;
+ DCMD(si->rxdma) = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_WIDTH1 | DCMD_BURST32 | IRDA_FRAME_SIZE_LIMIT;
+ DCSR(si->rxdma) |= DCSR_RUN;
+}
+
+inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si)
+{
+ DCSR(si->txdma) = DCSR_NODESC;
+ DSADR(si->txdma) = si->dma_tx_buff_phy;
+ DTADR(si->txdma) = __PREG(ICDR);
+ DCMD(si->txdma) = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_ENDIRQEN | DCMD_WIDTH1 | DCMD_BURST32 | si->dma_tx_buff_len;
+ DCSR(si->txdma) |= DCSR_RUN;
+}
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
+{
+ unsigned long flags;
+ unsigned int divisor;
+
+ switch (speed) {
+ case 9600: case 19200: case 38400:
+ case 57600: case 115200:
+
+ /* refer to PXA250/210 Developer's Manual 10-7 */
+ /* BaudRate = 14.7456 MHz / (16*Divisor) */
+ divisor = 14745600 / (16 * speed);
+
+ local_irq_save(flags);
+
+ if (IS_FIR(si)) {
+ /* stop RX DMA */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ /* disable FICP */
+ ICCR0 = 0;
+ pxa_set_cken(CKEN13_FICP, 0);
+
+ /* set board transceiver to SIR mode */
+ si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
+
+ /* configure GPIO46/47 */
+ pxa_gpio_mode(GPIO46_STRXD_MD);
+ pxa_gpio_mode(GPIO47_STTXD_MD);
+
+ /* enable the STUART clock */
+ pxa_set_cken(CKEN5_STUART, 1);
+ }
+
+ /* disable STUART first */
+ STIER = 0;
+
+ /* access DLL & DLH */
+ STLCR |= LCR_DLAB;
+ STDLL = divisor & 0xff;
+ STDLH = divisor >> 8;
+ STLCR &= ~LCR_DLAB;
+
+ si->speed = speed;
+ STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6;
+ STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE;
+
+ local_irq_restore(flags);
+ break;
+
+ case 4000000:
+ local_irq_save(flags);
+
+ /* disable STUART */
+ STIER = 0;
+ STISR = 0;
+ pxa_set_cken(CKEN5_STUART, 0);
+
+ /* disable FICP first */
+ ICCR0 = 0;
+
+ /* set board transceiver to FIR mode */
+ si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
+
+ /* configure GPIO46/47 */
+ pxa_gpio_mode(GPIO46_ICPRXD_MD);
+ pxa_gpio_mode(GPIO47_ICPTXD_MD);
+
+ /* enable the FICP clock */
+ pxa_set_cken(CKEN13_FICP, 1);
+
+ si->speed = speed;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+ local_irq_restore(flags);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* SIR interrupt service routine. */
+static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct pxa_irda *si = netdev_priv(dev);
+ int iir, lsr, data;
+
+ iir = STIIR;
+
+ switch (iir & 0x0F) {
+ case 0x06: /* Receiver Line Status */
+ lsr = STLSR;
+ while (lsr & LSR_FIFOE) {
+ data = STRBR;
+ if (lsr & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) {
+ printk(KERN_DEBUG "pxa_ir: sir receiving error\n");
+ si->stats.rx_errors++;
+ if (lsr & LSR_FE)
+ si->stats.rx_frame_errors++;
+ if (lsr & LSR_OE)
+ si->stats.rx_fifo_errors++;
+ } else {
+ si->stats.rx_bytes++;
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, data);
+ }
+ lsr = STLSR;
+ }
+ dev->last_rx = jiffies;
+ si->last_oscr = OSCR;
+ break;
+
+ case 0x04: /* Received Data Available */
+ /* forth through */
+
+ case 0x0C: /* Character Timeout Indication */
+ do {
+ si->stats.rx_bytes++;
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, STRBR);
+ } while (STLSR & LSR_DR);
+ dev->last_rx = jiffies;
+ si->last_oscr = OSCR;
+ break;
+
+ case 0x02: /* Transmit FIFO Data Request */
+ while ((si->tx_buff.len) && (STLSR & LSR_TDRQ)) {
+ STTHR = *si->tx_buff.data++;
+ si->tx_buff.len -= 1;
+ }
+
+ if (si->tx_buff.len == 0) {
+ si->stats.tx_packets++;
+ si->stats.tx_bytes += si->tx_buff.data -
+ si->tx_buff.head;
+
+ /* We need to ensure that the transmitter has finished. */
+ while ((STLSR & LSR_TEMT) == 0)
+ cpu_relax();
+ si->last_oscr = OSCR;
+
+ /*
+ * Ok, we've finished transmitting. Now enable
+ * the receiver. Sometimes we get a receive IRQ
+ * immediately after a transmit...
+ */
+ if (si->newspeed) {
+ pxa_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ } else {
+ /* enable IR Receiver, disable IR Transmitter */
+ STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6;
+ /* enable STUART and receive interrupts */
+ STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE;
+ }
+ /* I'm hungry! */
+ netif_wake_queue(dev);
+ }
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* FIR Receive DMA interrupt handler */
+static void pxa_irda_fir_dma_rx_irq(int channel, void *data, struct pt_regs *regs)
+{
+ int dcsr = DCSR(channel);
+
+ DCSR(channel) = dcsr & ~DCSR_RUN;
+
+ printk(KERN_DEBUG "pxa_ir: fir rx dma bus error %#x\n", dcsr);
+}
+
+/* FIR Transmit DMA interrupt handler */
+static void pxa_irda_fir_dma_tx_irq(int channel, void *data, struct pt_regs *regs)
+{
+ struct net_device *dev = data;
+ struct pxa_irda *si = netdev_priv(dev);
+ int dcsr;
+
+ dcsr = DCSR(channel);
+ DCSR(channel) = dcsr & ~DCSR_RUN;
+
+ if (dcsr & DCSR_ENDINTR) {
+ si->stats.tx_packets++;
+ si->stats.tx_bytes += si->dma_tx_buff_len;
+ } else {
+ si->stats.tx_errors++;
+ }
+
+ while (ICSR1 & ICSR1_TBY)
+ cpu_relax();
+ si->last_oscr = OSCR;
+
+ /*
+ * HACK: It looks like the TBY bit is dropped too soon.
+ * Without this delay things break.
+ */
+ udelay(120);
+
+ if (si->newspeed) {
+ pxa_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ } else {
+ ICCR0 = 0;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+ }
+ netif_wake_queue(dev);
+}
+
+/* EIF(Error in FIFO/End in Frame) handler for FIR */
+static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev)
+{
+ unsigned int len, stat, data;
+
+ /* Get the current data position. */
+ len = DTADR(si->rxdma) - si->dma_rx_buff_phy;
+
+ do {
+ /* Read Status, and then Data. */
+ stat = ICSR1;
+ rmb();
+ data = ICDR;
+
+ if (stat & (ICSR1_CRE | ICSR1_ROR)) {
+ si->stats.rx_errors++;
+ if (stat & ICSR1_CRE) {
+ printk(KERN_DEBUG "pxa_ir: fir receive CRC error\n");
+ si->stats.rx_crc_errors++;
+ }
+ if (stat & ICSR1_ROR) {
+ printk(KERN_DEBUG "pxa_ir: fir receive overrun\n");
+ si->stats.rx_frame_errors++;
+ }
+ } else {
+ si->dma_rx_buff[len++] = data;
+ }
+ /* If we hit the end of frame, there's no point in continuing. */
+ if (stat & ICSR1_EOF)
+ break;
+ } while (ICSR0 & ICSR0_EIF);
+
+ if (stat & ICSR1_EOF) {
+ /* end of frame. */
+ struct sk_buff *skb = alloc_skb(len+1,GFP_ATOMIC);
+ if (!skb) {
+ printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n");
+ si->stats.rx_dropped++;
+ return;
+ }
+
+ /* Align IP header to 20 bytes */
+ skb_reserve(skb, 1);
+ memcpy(skb->data, si->dma_rx_buff, len);
+ skb_put(skb, len);
+
+ /* Feed it to IrLAP */
+ skb->dev = dev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+
+ si->stats.rx_packets++;
+ si->stats.rx_bytes += len;
+
+ dev->last_rx = jiffies;
+ }
+}
+
+/* FIR interrupt handler */
+static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct pxa_irda *si = netdev_priv(dev);
+ int icsr0;
+
+ /* stop RX DMA */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ si->last_oscr = OSCR;
+ icsr0 = ICSR0;
+
+ if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) {
+ if (icsr0 & ICSR0_FRE) {
+ printk(KERN_DEBUG "pxa_ir: fir receive frame error\n");
+ si->stats.rx_frame_errors++;
+ } else {
+ printk(KERN_DEBUG "pxa_ir: fir receive abort\n");
+ si->stats.rx_errors++;
+ }
+ ICSR0 = icsr0 & (ICSR0_FRE | ICSR0_RAB);
+ }
+
+ if (icsr0 & ICSR0_EIF) {
+ /* An error in FIFO occured, or there is a end of frame */
+ pxa_irda_fir_irq_eif(si, dev);
+ }
+
+ ICCR0 = 0;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+ return IRQ_HANDLED;
+}
+
+/* hard_xmit interface of irda device */
+static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ int speed = irda_get_next_speed(skb);
+
+ /*
+ * Does this packet contain a request to change the interface
+ * speed? If so, remember it until we complete the transmission
+ * of this frame.
+ */
+ if (speed != si->speed && speed != -1)
+ si->newspeed = speed;
+
+ /*
+ * If this is an empty frame, we can bypass a lot.
+ */
+ if (skb->len == 0) {
+ if (si->newspeed) {
+ si->newspeed = 0;
+ pxa_irda_set_speed(si, speed);
+ }
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ netif_stop_queue(dev);
+
+ if (!IS_FIR(si)) {
+ si->tx_buff.data = si->tx_buff.head;
+ si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, si->tx_buff.truesize);
+
+ /* Disable STUART interrupts and switch to transmit mode. */
+ STIER = 0;
+ STISR = IrSR_IR_TRANSMIT_ON | IrSR_XMODE_PULSE_1_6;
+
+ /* enable STUART and transmit interrupts */
+ STIER = IER_UUE | IER_TIE;
+ } else {
+ unsigned long mtt = irda_get_mtt(skb);
+
+ si->dma_tx_buff_len = skb->len;
+ memcpy(si->dma_tx_buff, skb->data, skb->len);
+
+ if (mtt)
+ while ((unsigned)(OSCR - si->last_oscr)/4 < mtt)
+ cpu_relax();
+
+ /* stop RX DMA, disable FICP */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ ICCR0 = 0;
+
+ pxa_irda_fir_dma_tx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_TXE;
+ }
+
+ dev_kfree_skb(skb);
+ dev->trans_start = jiffies;
+ return 0;
+}
+
+static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+ struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+ struct pxa_irda *si = netdev_priv(dev);
+ int ret;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ /*
+ * We are unable to set the speed if the
+ * device is not running.
+ */
+ if (netif_running(dev)) {
+ ret = pxa_irda_set_speed(si,
+ rq->ifr_baudrate);
+ } else {
+ printk(KERN_INFO "pxa_ir: SIOCSBANDWIDTH: !netif_running\n");
+ ret = 0;
+ }
+ }
+ break;
+
+ case SIOCSMEDIABUSY:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ irda_device_set_media_busy(dev, TRUE);
+ ret = 0;
+ }
+ break;
+
+ case SIOCGRECEIVING:
+ ret = 0;
+ rq->ifr_receiving = IS_FIR(si) ? 0
+ : si->rx_buff.state != OUTSIDE_FRAME;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ return ret;
+}
+
+static struct net_device_stats *pxa_irda_stats(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ return &si->stats;
+}
+
+static void pxa_irda_startup(struct pxa_irda *si)
+{
+ /* Disable STUART interrupts */
+ STIER = 0;
+ /* enable STUART interrupt to the processor */
+ STMCR = MCR_OUT2;
+ /* configure SIR frame format: StartBit - Data 7 ... Data 0 - Stop Bit */
+ STLCR = LCR_WLS0 | LCR_WLS1;
+ /* enable FIFO, we use FIFO to improve performance */
+ STFCR = FCR_TRFIFOE | FCR_ITL_32;
+
+ /* disable FICP */
+ ICCR0 = 0;
+ /* configure FICP ICCR2 */
+ ICCR2 = ICCR2_TXP | ICCR2_TRIG_32;
+
+ /* configure DMAC */
+ DRCMR17 = si->rxdma | DRCMR_MAPVLD;
+ DRCMR18 = si->txdma | DRCMR_MAPVLD;
+
+ /* force SIR reinitialization */
+ si->speed = 4000000;
+ pxa_irda_set_speed(si, 9600);
+
+ printk(KERN_DEBUG "pxa_ir: irda startup\n");
+}
+
+static void pxa_irda_shutdown(struct pxa_irda *si)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* disable STUART and interrupt */
+ STIER = 0;
+ /* disable STUART SIR mode */
+ STISR = 0;
+ /* disable the STUART clock */
+ pxa_set_cken(CKEN5_STUART, 0);
+
+ /* disable DMA */
+ DCSR(si->txdma) &= ~DCSR_RUN;
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ /* disable FICP */
+ ICCR0 = 0;
+ /* disable the FICP clock */
+ pxa_set_cken(CKEN13_FICP, 0);
+
+ DRCMR17 = 0;
+ DRCMR18 = 0;
+
+ local_irq_restore(flags);
+
+ /* power off board transceiver */
+ si->pdata->transceiver_mode(si->dev, IR_OFF);
+
+ printk(KERN_DEBUG "pxa_ir: irda shutdown\n");
+}
+
+static int pxa_irda_start(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ int err;
+
+ si->speed = 9600;
+
+ err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq1;
+
+ err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq2;
+
+ /*
+ * The interrupt must remain disabled for now.
+ */
+ disable_irq(IRQ_STUART);
+ disable_irq(IRQ_ICP);
+
+ err = -EBUSY;
+ si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev);
+ if (si->rxdma < 0)
+ goto err_rx_dma;
+
+ si->txdma = pxa_request_dma("FICP_TX",DMA_PRIO_LOW, pxa_irda_fir_dma_tx_irq, dev);
+ if (si->txdma < 0)
+ goto err_tx_dma;
+
+ err = -ENOMEM;
+ si->dma_rx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT,
+ &si->dma_rx_buff_phy, GFP_KERNEL );
+ if (!si->dma_rx_buff)
+ goto err_dma_rx_buff;
+
+ si->dma_tx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT,
+ &si->dma_tx_buff_phy, GFP_KERNEL );
+ if (!si->dma_tx_buff)
+ goto err_dma_tx_buff;
+
+ /* Setup the serial port for the initial speed. */
+ pxa_irda_startup(si);
+
+ /*
+ * Open a new IrLAP layer instance.
+ */
+ si->irlap = irlap_open(dev, &si->qos, "pxa");
+ err = -ENOMEM;
+ if (!si->irlap)
+ goto err_irlap;
+
+ /*
+ * Now enable the interrupt and start the queue
+ */
+ enable_irq(IRQ_STUART);
+ enable_irq(IRQ_ICP);
+ netif_start_queue(dev);
+
+ printk(KERN_DEBUG "pxa_ir: irda driver opened\n");
+
+ return 0;
+
+err_irlap:
+ pxa_irda_shutdown(si);
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy);
+err_dma_tx_buff:
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy);
+err_dma_rx_buff:
+ pxa_free_dma(si->txdma);
+err_tx_dma:
+ pxa_free_dma(si->rxdma);
+err_rx_dma:
+ free_irq(IRQ_ICP, dev);
+err_irq2:
+ free_irq(IRQ_STUART, dev);
+err_irq1:
+
+ return err;
+}
+
+static int pxa_irda_stop(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+
+ pxa_irda_shutdown(si);
+
+ /* Stop IrLAP */
+ if (si->irlap) {
+ irlap_close(si->irlap);
+ si->irlap = NULL;
+ }
+
+ free_irq(IRQ_STUART, dev);
+ free_irq(IRQ_ICP, dev);
+
+ pxa_free_dma(si->rxdma);
+ pxa_free_dma(si->txdma);
+
+ if (si->dma_rx_buff)
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy);
+ if (si->dma_tx_buff)
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy);
+
+ printk(KERN_DEBUG "pxa_ir: irda driver closed\n");
+ return 0;
+}
+
+static int pxa_irda_suspend(struct device *_dev, pm_message_t state, u32 level)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct pxa_irda *si;
+
+ if (!dev || level != SUSPEND_DISABLE)
+ return 0;
+
+ if (netif_running(dev)) {
+ si = netdev_priv(dev);
+ netif_device_detach(dev);
+ pxa_irda_shutdown(si);
+ }
+
+ return 0;
+}
+
+static int pxa_irda_resume(struct device *_dev, u32 level)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct pxa_irda *si;
+
+ if (!dev || level != RESUME_ENABLE)
+ return 0;
+
+ if (netif_running(dev)) {
+ si = netdev_priv(dev);
+ pxa_irda_startup(si);
+ netif_device_attach(dev);
+ netif_wake_queue(dev);
+ }
+
+ return 0;
+}
+
+
+static int pxa_irda_init_iobuf(iobuff_t *io, int size)
+{
+ io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
+ if (io->head != NULL) {
+ io->truesize = size;
+ io->in_frame = FALSE;
+ io->state = OUTSIDE_FRAME;
+ io->data = io->head;
+ }
+ return io->head ? 0 : -ENOMEM;
+}
+
+static int pxa_irda_probe(struct device *_dev)
+{
+ struct platform_device *pdev = to_platform_device(_dev);
+ struct net_device *dev;
+ struct pxa_irda *si;
+ unsigned int baudrate_mask;
+ int err;
+
+ if (!pdev->dev.platform_data)
+ return -ENODEV;
+
+ err = request_mem_region(__PREG(STUART), 0x24, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_1;
+
+ err = request_mem_region(__PREG(FICP), 0x1c, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_2;
+
+ dev = alloc_irdadev(sizeof(struct pxa_irda));
+ if (!dev)
+ goto err_mem_3;
+
+ si = netdev_priv(dev);
+ si->dev = &pdev->dev;
+ si->pdata = pdev->dev.platform_data;
+
+ /*
+ * Initialise the SIR buffers
+ */
+ err = pxa_irda_init_iobuf(&si->rx_buff, 14384);
+ if (err)
+ goto err_mem_4;
+ err = pxa_irda_init_iobuf(&si->tx_buff, 4000);
+ if (err)
+ goto err_mem_5;
+
+ dev->hard_start_xmit = pxa_irda_hard_xmit;
+ dev->open = pxa_irda_start;
+ dev->stop = pxa_irda_stop;
+ dev->do_ioctl = pxa_irda_ioctl;
+ dev->get_stats = pxa_irda_stats;
+
+ irda_init_max_qos_capabilies(&si->qos);
+
+ baudrate_mask = 0;
+ if (si->pdata->transceiver_cap & IR_SIRMODE)
+ baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ if (si->pdata->transceiver_cap & IR_FIRMODE)
+ baudrate_mask |= IR_4000000 << 8;
+
+ si->qos.baud_rate.bits &= baudrate_mask;
+ si->qos.min_turn_time.bits = 7; /* 1ms or more */
+
+ irda_qos_bits_to_value(&si->qos);
+
+ err = register_netdev(dev);
+
+ if (err == 0)
+ dev_set_drvdata(&pdev->dev, dev);
+
+ if (err) {
+ kfree(si->tx_buff.head);
+err_mem_5:
+ kfree(si->rx_buff.head);
+err_mem_4:
+ free_netdev(dev);
+err_mem_3:
+ release_mem_region(__PREG(FICP), 0x1c);
+err_mem_2:
+ release_mem_region(__PREG(STUART), 0x24);
+ }
+err_mem_1:
+ return err;
+}
+
+static int pxa_irda_remove(struct device *_dev)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+
+ if (dev) {
+ struct pxa_irda *si = netdev_priv(dev);
+ unregister_netdev(dev);
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ }
+
+ release_mem_region(__PREG(STUART), 0x24);
+ release_mem_region(__PREG(FICP), 0x1c);
+
+ return 0;
+}
+
+static struct device_driver pxa_ir_driver = {
+ .name = "pxa2xx-ir",
+ .bus = &platform_bus_type,
+ .probe = pxa_irda_probe,
+ .remove = pxa_irda_remove,
+ .suspend = pxa_irda_suspend,
+ .resume = pxa_irda_resume,
+};
+
+static int __init pxa_irda_init(void)
+{
+ return driver_register(&pxa_ir_driver);
+}
+
+static void __exit pxa_irda_exit(void)
+{
+ driver_unregister(&pxa_ir_driver);
+}
+
+module_init(pxa_irda_init);
+module_exit(pxa_irda_exit);
+
+MODULE_LICENSE("GPL");