aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/wireless/ath9k/ath9k.h21
-rw-r--r--drivers/net/wireless/ath9k/beacon.c83
2 files changed, 24 insertions, 80 deletions
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h
index f74ed7af31e..f5d099f0ab4 100644
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -549,17 +549,16 @@ struct ath_rfkill {
#define SC_OP_TXAGGR BIT(3)
#define SC_OP_CHAINMASK_UPDATE BIT(4)
#define SC_OP_FULL_RESET BIT(5)
-#define SC_OP_NO_RESET BIT(6)
-#define SC_OP_PREAMBLE_SHORT BIT(7)
-#define SC_OP_PROTECT_ENABLE BIT(8)
-#define SC_OP_RXFLUSH BIT(9)
-#define SC_OP_LED_ASSOCIATED BIT(10)
-#define SC_OP_RFKILL_REGISTERED BIT(11)
-#define SC_OP_RFKILL_SW_BLOCKED BIT(12)
-#define SC_OP_RFKILL_HW_BLOCKED BIT(13)
-#define SC_OP_WAIT_FOR_BEACON BIT(14)
-#define SC_OP_LED_ON BIT(15)
-#define SC_OP_SCANNING BIT(16)
+#define SC_OP_PREAMBLE_SHORT BIT(6)
+#define SC_OP_PROTECT_ENABLE BIT(7)
+#define SC_OP_RXFLUSH BIT(8)
+#define SC_OP_LED_ASSOCIATED BIT(9)
+#define SC_OP_RFKILL_REGISTERED BIT(10)
+#define SC_OP_RFKILL_SW_BLOCKED BIT(11)
+#define SC_OP_RFKILL_HW_BLOCKED BIT(12)
+#define SC_OP_WAIT_FOR_BEACON BIT(13)
+#define SC_OP_LED_ON BIT(14)
+#define SC_OP_SCANNING BIT(15)
struct ath_bus_ops {
void (*read_cachesize)(struct ath_softc *sc, int *csz);
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index c3044891a93..349904c761e 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -49,13 +49,6 @@ static int ath_beaconq_config(struct ath_softc *sc)
}
}
-static void ath_bstuck_process(struct ath_softc *sc)
-{
- DPRINTF(sc, ATH_DBG_BEACON, "stuck beacon; resetting (bmiss count %u)\n",
- sc->beacon.bmisscnt);
- ath_reset(sc, false);
-}
-
/*
* Associates the beacon frame buffer with a transmit descriptor. Will set
* up all required antenna switch parameters, rate codes, and channel flags.
@@ -401,83 +394,37 @@ void ath_beacon_tasklet(unsigned long data)
struct ath_hw *ah = sc->sc_ah;
struct ath_buf *bf = NULL;
int slot, if_id;
- u32 bfaddr, show_cycles = 0, bc = 0, tsftu;
- u32 rx_clear = 0, rx_frame = 0, tx_frame = 0;
+ u32 bfaddr, bc = 0, tsftu;
u64 tsf;
u16 intval;
- if (sc->sc_flags & SC_OP_NO_RESET) {
- show_cycles = ath9k_hw_GetMibCycleCountsPct(ah,
- &rx_clear, &rx_frame, &tx_frame);
- }
-
/*
* Check if the previous beacon has gone out. If
* not don't try to post another, skip this period
* and wait for the next. Missed beacons indicate
* a problem and should not occur. If we miss too
* many consecutive beacons reset the device.
- *
- * FIXME: Clean up this mess !!
*/
if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
sc->beacon.bmisscnt++;
- /* XXX: doth needs the chanchange IE countdown decremented.
- * We should consider adding a mac80211 call to indicate
- * a beacon miss so appropriate action could be taken
- * (in that layer).
- */
+
if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
- if (sc->sc_flags & SC_OP_NO_RESET) {
- DPRINTF(sc, ATH_DBG_BEACON,
- "missed %u consecutive beacons\n",
- sc->beacon.bmisscnt);
- if (show_cycles) {
- /*
- * Display cycle counter stats from HW
- * to aide in debug of stickiness.
- */
- DPRINTF(sc, ATH_DBG_BEACON,
- "busy times: rx_clear=%d, "
- "rx_frame=%d, tx_frame=%d\n",
- rx_clear, rx_frame,
- tx_frame);
- } else {
- DPRINTF(sc, ATH_DBG_BEACON,
- "unable to obtain "
- "busy times\n");
- }
- } else {
- DPRINTF(sc, ATH_DBG_BEACON,
- "missed %u consecutive beacons\n",
- sc->beacon.bmisscnt);
- }
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "missed %u consecutive beacons\n",
+ sc->beacon.bmisscnt);
} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
- if (sc->sc_flags & SC_OP_NO_RESET) {
- if (sc->beacon.bmisscnt == BSTUCK_THRESH) {
- DPRINTF(sc, ATH_DBG_BEACON,
- "beacon is officially "
- "stuck\n");
- }
- } else {
- DPRINTF(sc, ATH_DBG_BEACON,
- "beacon is officially stuck\n");
- ath_bstuck_process(sc);
- }
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "beacon is officially stuck\n");
+ ath_reset(sc, false);
}
+
return;
}
if (sc->beacon.bmisscnt != 0) {
- if (sc->sc_flags & SC_OP_NO_RESET) {
- DPRINTF(sc, ATH_DBG_BEACON,
- "resume beacon xmit after %u misses\n",
- sc->beacon.bmisscnt);
- } else {
- DPRINTF(sc, ATH_DBG_BEACON,
- "resume beacon xmit after %u misses\n",
- sc->beacon.bmisscnt);
- }
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "resume beacon xmit after %u misses\n",
+ sc->beacon.bmisscnt);
sc->beacon.bmisscnt = 0;
}
@@ -497,8 +444,7 @@ void ath_beacon_tasklet(unsigned long data)
DPRINTF(sc, ATH_DBG_BEACON,
"slot %d [tsf %llu tsftu %u intval %u] if_id %d\n",
- slot, (unsigned long long)tsf, tsftu,
- intval, if_id);
+ slot, tsf, tsftu, intval, if_id);
bfaddr = 0;
if (if_id != ATH_IF_ID_ANY) {
@@ -508,6 +454,7 @@ void ath_beacon_tasklet(unsigned long data)
bc = 1;
}
}
+
/*
* Handle slot time change when a non-ERP station joins/leaves
* an 11g network. The 802.11 layer notifies us via callback,
@@ -524,7 +471,6 @@ void ath_beacon_tasklet(unsigned long data)
* interval has passed. When bursting slot is always left
* set to ATH_BCBUF so this check is a noop.
*/
- /* XXX locking */
if (sc->beacon.updateslot == UPDATE) {
sc->beacon.updateslot = COMMIT; /* commit next beacon */
sc->beacon.slotupdate = slot;
@@ -541,7 +487,6 @@ void ath_beacon_tasklet(unsigned long data)
if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) {
DPRINTF(sc, ATH_DBG_FATAL,
"beacon queue %u did not stop?\n", sc->beacon.beaconq);
- /* NB: the HAL still stops DMA, so proceed */
}
/* NB: cabq traffic should already be queued and primed */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 11:56:25 +0000