aboutsummaryrefslogtreecommitdiff
path: root/drivers/platform
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform')
-rw-r--r--drivers/platform/x86/Kconfig34
-rw-r--r--drivers/platform/x86/Makefile1
-rw-r--r--drivers/platform/x86/acerhdf.c602
-rw-r--r--drivers/platform/x86/asus-laptop.c111
-rw-r--r--drivers/platform/x86/asus_acpi.c30
-rw-r--r--drivers/platform/x86/dell-wmi.c56
-rw-r--r--drivers/platform/x86/eeepc-laptop.c126
-rw-r--r--drivers/platform/x86/hp-wmi.c87
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c411
9 files changed, 1279 insertions, 179 deletions
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c682ac53641..7232fe7104a 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -34,10 +34,27 @@ config ACER_WMI
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
+config ACERHDF
+ tristate "Acer Aspire One temperature and fan driver"
+ depends on THERMAL && THERMAL_HWMON && ACPI
+ ---help---
+ This is a driver for Acer Aspire One netbooks. It allows to access
+ the temperature sensor and to control the fan.
+
+ After loading this driver the BIOS is still in control of the fan.
+ To let the kernel handle the fan, do:
+ echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+ For more information about this driver see
+ <http://piie.net/files/acerhdf_README.txt>
+
+ If you have an Acer Aspire One netbook, say Y or M
+ here.
+
config ASUS_LAPTOP
- tristate "Asus Laptop Extras (EXPERIMENTAL)"
+ tristate "Asus Laptop Extras"
depends on ACPI
- depends on EXPERIMENTAL && !ACPI_ASUS
+ depends on !ACPI_ASUS
select LEDS_CLASS
select NEW_LEDS
select BACKLIGHT_CLASS_DEVICE
@@ -45,12 +62,12 @@ config ASUS_LAPTOP
---help---
This is the new Linux driver for Asus laptops. It may also support some
MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
- standard ACPI events that go through /proc/acpi/events. It also adds
+ standard ACPI events and input events. It also adds
support for video output switching, LCD backlight control, Bluetooth and
Wlan control, and most importantly, allows you to blink those fancy LEDs.
For more information and a userspace daemon for handling the extra
- buttons see <http://acpi4asus.sf.net/>.
+ buttons see <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here.
@@ -342,7 +359,10 @@ config EEEPC_LAPTOP
select HWMON
---help---
This driver supports the Fn-Fx keys on Eee PC laptops.
- It also adds the ability to switch camera/wlan on/off.
+
+ It also gives access to some extra laptop functionalities like
+ Bluetooth, backlight and allows powering on/off some other
+ devices.
If you have an Eee PC laptop, say Y or M here.
@@ -369,7 +389,7 @@ config ACPI_WMI
any ACPI-WMI devices.
config ACPI_ASUS
- tristate "ASUS/Medion Laptop Extras"
+ tristate "ASUS/Medion Laptop Extras (DEPRECATED)"
depends on ACPI
select BACKLIGHT_CLASS_DEVICE
---help---
@@ -390,7 +410,7 @@ config ACPI_ASUS
parameters.
More information and a userspace daemon for handling the extra buttons
- at <http://sourceforge.net/projects/acpi4asus/>.
+ at <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here. This
driver is still under development, so if your laptop is unsupported or
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e40c7bd1b87..641b8bfa553 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
+obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
new file mode 100644
index 00000000000..bdfee177eef
--- /dev/null
+++ b/drivers/platform/x86/acerhdf.c
@@ -0,0 +1,602 @@
+/*
+ * acerhdf - A driver which monitors the temperature
+ * of the aspire one netbook, turns on/off the fan
+ * as soon as the upper/lower threshold is reached.
+ *
+ * (C) 2009 - Peter Feuerer peter (a) piie.net
+ * http://piie.net
+ * 2009 Borislav Petkov <petkovbb@gmail.com>
+ *
+ * Inspired by and many thanks to:
+ * o acerfand - Rachel Greenham
+ * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
+ * - Petr Tomasek tomasek (#) etf,cuni,cz
+ * - Carlos Corbacho cathectic (at) gmail.com
+ * o lkml - Matthew Garrett
+ * - Borislav Petkov
+ * - Andreas Mohr
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) "acerhdf: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/dmi.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/sched.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+/*
+ * The driver is started with "kernel mode off" by default. That means, the BIOS
+ * is still in control of the fan. In this mode the driver allows to read the
+ * temperature of the cpu and a userspace tool may take over control of the fan.
+ * If the driver is switched to "kernel mode" (e.g. via module parameter) the
+ * driver is in full control of the fan. If you want the module to be started in
+ * kernel mode by default, define the following:
+ */
+#undef START_IN_KERNEL_MODE
+
+#define DRV_VER "0.5.13"
+
+/*
+ * According to the Atom N270 datasheet,
+ * (http://download.intel.com/design/processor/datashts/320032.pdf) the
+ * CPU's optimal operating limits denoted in junction temperature as
+ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
+ * assume 89°C is critical temperature.
+ */
+#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_FAN_OFF 0
+#define ACERHDF_FAN_AUTO 1
+
+/*
+ * No matter what value the user puts into the fanon variable, turn on the fan
+ * at 80 degree Celsius to prevent hardware damage
+ */
+#define ACERHDF_MAX_FANON 80
+
+/*
+ * Maximum interval between two temperature checks is 15 seconds, as the die
+ * can get hot really fast under heavy load (plus we shouldn't forget about
+ * possible impact of _external_ aggressive sources such as heaters, sun etc.)
+ */
+#define ACERHDF_MAX_INTERVAL 15
+
+#ifdef START_IN_KERNEL_MODE
+static int kernelmode = 1;
+#else
+static int kernelmode;
+#endif
+
+static unsigned int interval = 10;
+static unsigned int fanon = 63;
+static unsigned int fanoff = 58;
+static unsigned int verbose;
+static unsigned int fanstate = ACERHDF_FAN_AUTO;
+static char force_bios[16];
+static unsigned int prev_interval;
+struct thermal_zone_device *thz_dev;
+struct thermal_cooling_device *cl_dev;
+struct platform_device *acerhdf_dev;
+
+module_param(kernelmode, uint, 0);
+MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
+module_param(interval, uint, 0600);
+MODULE_PARM_DESC(interval, "Polling interval of temperature check");
+module_param(fanon, uint, 0600);
+MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
+module_param(fanoff, uint, 0600);
+MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
+module_param(verbose, uint, 0600);
+MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
+module_param_string(force_bios, force_bios, 16, 0);
+MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+
+/* BIOS settings */
+struct bios_settings_t {
+ const char *vendor;
+ const char *version;
+ unsigned char fanreg;
+ unsigned char tempreg;
+ unsigned char fancmd[2]; /* fan off and auto commands */
+};
+
+/* Register addresses and values for different BIOS versions */
+static const struct bios_settings_t bios_tbl[] = {
+ {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+ {"", "", 0, 0, {0, 0} }
+};
+
+static const struct bios_settings_t *bios_cfg __read_mostly;
+
+
+static int acerhdf_get_temp(int *temp)
+{
+ u8 read_temp;
+
+ if (ec_read(bios_cfg->tempreg, &read_temp))
+ return -EINVAL;
+
+ *temp = read_temp;
+
+ return 0;
+}
+
+static int acerhdf_get_fanstate(int *state)
+{
+ u8 fan;
+ bool tmp;
+
+ if (ec_read(bios_cfg->fanreg, &fan))
+ return -EINVAL;
+
+ tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
+ *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+
+ return 0;
+}
+
+static void acerhdf_change_fanstate(int state)
+{
+ unsigned char cmd;
+
+ if (verbose)
+ pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
+ "OFF" : "ON");
+
+ if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
+ pr_err("invalid fan state %d requested, setting to auto!\n",
+ state);
+ state = ACERHDF_FAN_AUTO;
+ }
+
+ cmd = bios_cfg->fancmd[state];
+ fanstate = state;
+
+ ec_write(bios_cfg->fanreg, cmd);
+}
+
+static void acerhdf_check_param(struct thermal_zone_device *thermal)
+{
+ if (fanon > ACERHDF_MAX_FANON) {
+ pr_err("fanon temperature too high, set to %d\n",
+ ACERHDF_MAX_FANON);
+ fanon = ACERHDF_MAX_FANON;
+ }
+
+ if (kernelmode && prev_interval != interval) {
+ if (interval > ACERHDF_MAX_INTERVAL) {
+ pr_err("interval too high, set to %d\n",
+ ACERHDF_MAX_INTERVAL);
+ interval = ACERHDF_MAX_INTERVAL;
+ }
+ if (verbose)
+ pr_notice("interval changed to: %d\n",
+ interval);
+ thermal->polling_delay = interval*1000;
+ prev_interval = interval;
+ }
+}
+
+/*
+ * This is the thermal zone callback which does the delayed polling of the fan
+ * state. We do check /sysfs-originating settings here in acerhdf_check_param()
+ * as late as the polling interval is since we can't do that in the respective
+ * accessors of the module parameters.
+ */
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
+ unsigned long *t)
+{
+ int temp, err = 0;
+
+ acerhdf_check_param(thermal);
+
+ err = acerhdf_get_temp(&temp);
+ if (err)
+ return err;
+
+ if (verbose)
+ pr_notice("temp %d\n", temp);
+
+ *t = temp;
+ return 0;
+}
+
+static int acerhdf_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ /* if the cooling device is the one from acerhdf bind it */
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error binding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int acerhdf_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error unbinding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline void acerhdf_revert_to_bios_mode(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ kernelmode = 0;
+ if (thz_dev)
+ thz_dev->polling_delay = 0;
+ pr_notice("kernel mode fan control OFF\n");
+}
+static inline void acerhdf_enable_kernelmode(void)
+{
+ kernelmode = 1;
+
+ thz_dev->polling_delay = interval*1000;
+ thermal_zone_device_update(thz_dev);
+ pr_notice("kernel mode fan control ON\n");
+}
+
+static int acerhdf_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ if (verbose)
+ pr_notice("kernel mode fan control %d\n", kernelmode);
+
+ *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
+ : THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+/*
+ * set operation mode;
+ * enabled: the thermal layer of the kernel takes care about
+ * the temperature and the fan.
+ * disabled: the BIOS takes control of the fan.
+ */
+static int acerhdf_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
+ acerhdf_revert_to_bios_mode();
+ else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
+ acerhdf_enable_kernelmode();
+
+ return 0;
+}
+
+static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type *type)
+{
+ if (trip == 0)
+ *type = THERMAL_TRIP_ACTIVE;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon;
+
+ return 0;
+}
+
+static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature)
+{
+ *temperature = ACERHDF_TEMP_CRIT;
+ return 0;
+}
+
+/* bind callback functions to thermalzone */
+struct thermal_zone_device_ops acerhdf_dev_ops = {
+ .bind = acerhdf_bind,
+ .unbind = acerhdf_unbind,
+ .get_temp = acerhdf_get_ec_temp,
+ .get_mode = acerhdf_get_mode,
+ .set_mode = acerhdf_set_mode,
+ .get_trip_type = acerhdf_get_trip_type,
+ .get_trip_temp = acerhdf_get_trip_temp,
+ .get_crit_temp = acerhdf_get_crit_temp,
+};
+
+
+/*
+ * cooling device callback functions
+ * get maximal fan cooling state
+ */
+static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = 1;
+
+ return 0;
+}
+
+static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ int err = 0, tmp;
+
+ err = acerhdf_get_fanstate(&tmp);
+ if (err)
+ return err;
+
+ *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
+ return 0;
+}
+
+/* change current fan state - is overwritten when running in kernel mode */
+static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ int cur_temp, cur_state, err = 0;
+
+ if (!kernelmode)
+ return 0;
+
+ err = acerhdf_get_temp(&cur_temp);
+ if (err) {
+ pr_err("error reading temperature, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ err = acerhdf_get_fanstate(&cur_state);
+ if (err) {
+ pr_err("error reading fan state, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ if (state == 0) {
+ /* turn fan off only if below fanoff temperature */
+ if ((cur_state == ACERHDF_FAN_AUTO) &&
+ (cur_temp < fanoff))
+ acerhdf_change_fanstate(ACERHDF_FAN_OFF);
+ } else {
+ if (cur_state == ACERHDF_FAN_OFF)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ }
+ return 0;
+
+err_out:
+ acerhdf_revert_to_bios_mode();
+ return -EINVAL;
+}
+
+/* bind fan callbacks to fan device */
+struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+ .get_max_state = acerhdf_get_max_state,
+ .get_cur_state = acerhdf_get_cur_state,
+ .set_cur_state = acerhdf_set_cur_state,
+};
+
+/* suspend / resume functionality */
+static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+{
+ if (kernelmode)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+
+ if (verbose)
+ pr_notice("going suspend\n");
+
+ return 0;
+}
+
+static int acerhdf_resume(struct platform_device *device)
+{
+ if (verbose)
+ pr_notice("resuming\n");
+
+ return 0;
+}
+
+static int __devinit acerhdf_probe(struct platform_device *device)
+{
+ return 0;
+}
+
+static int acerhdf_remove(struct platform_device *device)
+{
+ return 0;
+}
+
+struct platform_driver acerhdf_drv = {
+ .driver = {
+ .name = "acerhdf",
+ .owner = THIS_MODULE,
+ },
+ .probe = acerhdf_probe,
+ .remove = acerhdf_remove,
+ .suspend = acerhdf_suspend,
+ .resume = acerhdf_resume,
+};
+
+
+/* check hardware */
+static int acerhdf_check_hardware(void)
+{
+ char const *vendor, *version, *product;
+ int i;
+
+ /* get BIOS data */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ version = dmi_get_system_info(DMI_BIOS_VERSION);
+ product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
+
+ if (!force_bios[0]) {
+ if (strncmp(product, "AO", 2)) {
+ pr_err("no Aspire One hardware found\n");
+ return -EINVAL;
+ }
+ } else {
+ pr_info("forcing BIOS version: %s\n", version);
+ version = force_bios;
+ kernelmode = 0;
+ }
+
+ if (verbose)
+ pr_info("BIOS info: %s %s, product: %s\n",
+ vendor, version, product);
+
+ /* search BIOS version and vendor in BIOS settings table */
+ for (i = 0; bios_tbl[i].version[0]; i++) {
+ if (!strcmp(bios_tbl[i].vendor, vendor) &&
+ !strcmp(bios_tbl[i].version, version)) {
+ bios_cfg = &bios_tbl[i];
+ break;
+ }
+ }
+
+ if (!bios_cfg) {
+ pr_err("unknown (unsupported) BIOS version %s/%s, "
+ "please report, aborting!\n", vendor, version);
+ return -EINVAL;
+ }
+
+ /*
+ * if started with kernel mode off, prevent the kernel from switching
+ * off the fan
+ */
+ if (!kernelmode) {
+ pr_notice("Fan control off, to enable do:\n");
+ pr_notice("echo -n \"enabled\" > "
+ "/sys/class/thermal/thermal_zone0/mode\n");
+ }
+
+ return 0;
+}
+
+static int acerhdf_register_platform(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&acerhdf_drv);
+ if (err)
+ return err;
+
+ acerhdf_dev = platform_device_alloc("acerhdf", -1);
+ platform_device_add(acerhdf_dev);
+
+ return 0;
+}
+
+static void acerhdf_unregister_platform(void)
+{
+ if (!acerhdf_dev)
+ return;
+
+ platform_device_del(acerhdf_dev);
+ platform_driver_unregister(&acerhdf_drv);
+}
+
+static int acerhdf_register_thermal(void)
+{
+ cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
+ &acerhdf_cooling_ops);
+
+ if (IS_ERR(cl_dev))
+ return -EINVAL;
+
+ thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ &acerhdf_dev_ops, 0, 0, 0,
+ (kernelmode) ? interval*1000 : 0);
+ if (IS_ERR(thz_dev))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void acerhdf_unregister_thermal(void)
+{
+ if (cl_dev) {
+ thermal_cooling_device_unregister(cl_dev);
+ cl_dev = NULL;
+ }
+
+ if (thz_dev) {
+ thermal_zone_device_unregister(thz_dev);
+ thz_dev = NULL;
+ }
+}
+
+static int __init acerhdf_init(void)
+{
+ int err = 0;
+
+ err = acerhdf_check_hardware();
+ if (err)
+ goto out_err;
+
+ err = acerhdf_register_platform();
+ if (err)
+ goto err_unreg;
+
+ err = acerhdf_register_thermal();
+ if (err)
+ goto err_unreg;
+
+ return 0;
+
+err_unreg:
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+
+out_err:
+ return -ENODEV;
+}
+
+static void __exit acerhdf_exit(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Feuerer");
+MODULE_DESCRIPTION("Aspire One temperature and fan driver");
+MODULE_ALIAS("dmi:*:*Acer*:*:");
+MODULE_ALIAS("dmi:*:*Gateway*:*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
+
+module_init(acerhdf_init);
+module_exit(acerhdf_exit);
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index bfc1a8892a3..db657bbeec9 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -33,6 +33,8 @@
* Sam Lin - GPS support
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -53,9 +55,10 @@
#define ASUS_HOTK_NAME "Asus Laptop Support"
#define ASUS_HOTK_CLASS "hotkey"
#define ASUS_HOTK_DEVICE_NAME "Hotkey"
-#define ASUS_HOTK_FILE "asus-laptop"
+#define ASUS_HOTK_FILE KBUILD_MODNAME
#define ASUS_HOTK_PREFIX "\\_SB.ATKD."
+
/*
* Some events we use, same for all Asus
*/
@@ -207,13 +210,17 @@ MODULE_DEVICE_TABLE(acpi, asus_device_ids);
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
+static void asus_hotk_notify(struct acpi_device *device, u32 event);
+
static struct acpi_driver asus_hotk_driver = {
.name = ASUS_HOTK_NAME,
.class = ASUS_HOTK_CLASS,
.ids = asus_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
+ .notify = asus_hotk_notify,
},
};
@@ -323,7 +330,7 @@ static int read_wireless_status(int mask)
rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading Wireless status\n");
+ pr_warning("Error reading Wireless status\n");
else
return (status & mask) ? 1 : 0;
@@ -337,7 +344,7 @@ static int read_gps_status(void)
rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading GPS status\n");
+ pr_warning("Error reading GPS status\n");
else
return status ? 1 : 0;
@@ -377,7 +384,7 @@ static void write_status(acpi_handle handle, int out, int mask)
}
if (write_acpi_int(handle, NULL, out, NULL))
- printk(ASUS_WARNING " write failed %x\n", mask);
+ pr_warning(" write failed %x\n", mask);
}
/* /sys/class/led handlers */
@@ -420,7 +427,7 @@ static int set_lcd_state(int value)
NULL, NULL, NULL);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Error switching LCD\n");
+ pr_warning("Error switching LCD\n");
}
write_status(NULL, lcd, LCD_ON);
@@ -444,7 +451,7 @@ static int read_brightness(struct backlight_device *bd)
rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading brightness\n");
+ pr_warning("Error reading brightness\n");
return value;
}
@@ -457,7 +464,7 @@ static int set_brightness(struct backlight_device *bd, int value)
/* 0 <= value <= 15 */
if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
- printk(ASUS_WARNING "Error changing brightness\n");
+ pr_warning("Error changing brightness\n");
ret = -EIO;
}
@@ -587,7 +594,7 @@ static ssize_t store_ledd(struct device *dev, struct device_attribute *attr,
rv = parse_arg(buf, count, &value);
if (rv > 0) {
if (write_acpi_int(ledd_set_handle, NULL, value, NULL))
- printk(ASUS_WARNING "LED display write failed\n");
+ pr_warning("LED display write failed\n");
else
hotk->ledd_status = (u32) value;
}
@@ -632,7 +639,7 @@ static void set_display(int value)
{
/* no sanity check needed for now */
if (write_acpi_int(display_set_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting display\n");
+ pr_warning("Error setting display\n");
return;
}
@@ -647,7 +654,7 @@ static int read_display(void)
rv = acpi_evaluate_integer(display_get_handle, NULL,
NULL, &value);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading display status\n");
+ pr_warning("Error reading display status\n");
}
value &= 0x0F; /* needed for some models, shouldn't hurt others */
@@ -689,7 +696,7 @@ static ssize_t store_disp(struct device *dev, struct device_attribute *attr,
static void set_light_sens_switch(int value)
{
if (write_acpi_int(ls_switch_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting light sensor switch\n");
+ pr_warning("Error setting light sensor switch\n");
hotk->light_switch = value;
}
@@ -714,7 +721,7 @@ static ssize_t store_lssw(struct device *dev, struct device_attribute *attr,
static void set_light_sens_level(int value)
{
if (write_acpi_int(ls_level_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting light sensor level\n");
+ pr_warning("Error setting light sensor level\n");
hotk->light_level = value;
}
@@ -812,7 +819,7 @@ static int asus_setkeycode(struct input_dev *dev, int scancode, int keycode)
return -EINVAL;
}
-static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void asus_hotk_notify(struct acpi_device *device, u32 event)
{
static struct key_entry *key;
u16 count;
@@ -975,11 +982,11 @@ static int asus_hotk_get_info(void)
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
+ pr_warning("Couldn't get the DSDT table header\n");
/* We have to write 0 on init this far for all ASUS models */
if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
- printk(ASUS_ERR "Hotkey initialization failed\n");
+ pr_err("Hotkey initialization failed\n");
return -ENODEV;
}
@@ -987,9 +994,9 @@ static int asus_hotk_get_info(void)
status =
acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Error calling BSTS\n");
+ pr_warning("Error calling BSTS\n");
else if (bsts_result)
- printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
+ pr_notice("BSTS called, 0x%02x returned\n",
(uint) bsts_result);
/* This too ... */
@@ -1020,7 +1027,7 @@ static int asus_hotk_get_info(void)
return -ENOMEM;
if (*string)
- printk(ASUS_NOTICE " %s model detected\n", string);
+ pr_notice(" %s model detected\n", string);
ASUS_HANDLE_INIT(mled_set);
ASUS_HANDLE_INIT(tled_set);
@@ -1077,7 +1084,7 @@ static int asus_input_init(void)
hotk->inputdev = input_allocate_device();
if (!hotk->inputdev) {
- printk(ASUS_INFO "Unable to allocate input device\n");
+ pr_info("Unable to allocate input device\n");
return 0;
}
hotk->inputdev->name = "Asus Laptop extra buttons";
@@ -1096,7 +1103,7 @@ static int asus_input_init(void)
}
result = input_register_device(hotk->inputdev);
if (result) {
- printk(ASUS_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
input_free_device(hotk->inputdev);
}
return result;
@@ -1113,7 +1120,7 @@ static int asus_hotk_check(void)
if (hotk->device->status.present) {
result = asus_hotk_get_info();
} else {
- printk(ASUS_ERR "Hotkey device not present, aborting\n");
+ pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
}
@@ -1124,13 +1131,12 @@ static int asus_hotk_found;
static int asus_hotk_add(struct acpi_device *device)
{
- acpi_status status = AE_OK;
int result;
if (!device)
return -EINVAL;
- printk(ASUS_NOTICE "Asus Laptop Support version %s\n",
+ pr_notice("Asus Laptop Support version %s\n",
ASUS_LAPTOP_VERSION);
hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
@@ -1149,15 +1155,6 @@ static int asus_hotk_add(struct acpi_device *device)
asus_hotk_add_fs();
- /*
- * We install the handler, it will receive the hotk in parameter, so, we
- * could add other data to the hotk struct
- */
- status = acpi_install_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
- asus_hotk_notify, hotk);
- if (ACPI_FAILURE(status))
- printk(ASUS_ERR "Error installing notify handler\n");
-
asus_hotk_found = 1;
/* WLED and BLED are on by default */
@@ -1198,16 +1195,9 @@ end:
static int asus_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
- asus_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(ASUS_ERR "Error removing notify handler\n");
-
kfree(hotk->name);
kfree(hotk);
@@ -1260,8 +1250,7 @@ static int asus_backlight_init(struct device *dev)
bd = backlight_device_register(ASUS_HOTK_FILE, dev,
NULL, &asusbl_ops);
if (IS_ERR(bd)) {
- printk(ASUS_ERR
- "Could not register asus backlight device\n");
+ pr_err("Could not register asus backlight device\n");
asus_backlight_device = NULL;
return PTR_ERR(bd);
}
@@ -1334,7 +1323,6 @@ out:
static int __init asus_laptop_init(void)
{
- struct device *dev;
int result;
if (acpi_disabled)
@@ -1356,24 +1344,10 @@ static int __init asus_laptop_init(void)
return -ENODEV;
}
- dev = acpi_get_physical_device(hotk->device->handle);
-
- if (!acpi_video_backlight_support()) {
- result = asus_backlight_init(dev);
- if (result)
- goto fail_backlight;
- } else
- printk(ASUS_INFO "Brightness ignored, must be controlled by "
- "ACPI video driver\n");
-
result = asus_input_init();
if (result)
goto fail_input;
- result = asus_led_init(dev);
- if (result)
- goto fail_led;
-
/* Register platform stuff */
result = platform_driver_register(&asuspf_driver);
if (result)
@@ -1394,8 +1368,27 @@ static int __init asus_laptop_init(void)
if (result)
goto fail_sysfs;
+ result = asus_led_init(&asuspf_device->dev);
+ if (result)
+ goto fail_led;
+
+ if (!acpi_video_backlight_support()) {
+ result = asus_backlight_init(&asuspf_device->dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ pr_info("Brightness ignored, must be controlled by "
+ "ACPI video driver\n");
+
return 0;
+fail_backlight:
+ asus_led_exit();
+
+fail_led:
+ sysfs_remove_group(&asuspf_device->dev.kobj,
+ &asuspf_attribute_group);
+
fail_sysfs:
platform_device_del(asuspf_device);
@@ -1406,15 +1399,9 @@ fail_platform_device1:
platform_driver_unregister(&asuspf_driver);
fail_platform_driver:
- asus_led_exit();
-
-fail_led:
asus_input_exit();
fail_input:
- asus_backlight_exit();
-
-fail_backlight:
return result;
}
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index ba1f7497e4b..ddf5240ade8 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -455,6 +455,8 @@ static struct asus_hotk *hotk;
*/
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
+static void asus_hotk_notify(struct acpi_device *device, u32 event);
+
static const struct acpi_device_id asus_device_ids[] = {
{"ATK0100", 0},
{"", 0},
@@ -465,9 +467,11 @@ static struct acpi_driver asus_hotk_driver = {
.name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
.ids = asus_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
+ .notify = asus_hotk_notify,
},
};
@@ -1101,12 +1105,20 @@ static int asus_hotk_remove_fs(struct acpi_device *device)
return 0;
}
-static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void asus_hotk_notify(struct acpi_device *device, u32 event)
{
/* TODO Find a better way to handle events count. */
if (!hotk)
return;
+ /*
+ * The BIOS *should* be sending us device events, but apparently
+ * Asus uses system events instead, so just ignore any device
+ * events we get.
+ */
+ if (event > ACPI_MAX_SYS_NOTIFY)
+ return;
+
if ((event & ~((u32) BR_UP)) < 16)
hotk->brightness = (event & ~((u32) BR_UP));
else if ((event & ~((u32) BR_DOWN)) < 16)
@@ -1346,15 +1358,6 @@ static int asus_hotk_add(struct acpi_device *device)
if (result)
goto end;
- /*
- * We install the handler, it will receive the hotk in parameter, so, we
- * could add other data to the hotk struct
- */
- status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
- asus_hotk_notify, hotk);
- if (ACPI_FAILURE(status))
- printk(KERN_ERR " Error installing notify handler\n");
-
/* For laptops without GPLV: init the hotk->brightness value */
if ((!hotk->methods->brightness_get)
&& (!hotk->methods->brightness_status)
@@ -1389,16 +1392,9 @@ end:
static int asus_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
- asus_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(KERN_ERR "Asus ACPI: Error removing notify handler\n");
-
asus_hotk_remove_fs(device);
kfree(hotk);
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 2fab9416214..0f900cc9fa7 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -46,10 +46,53 @@ struct key_entry {
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_SW, KE_IGNORE, KE_END };
+
+/*
+ * Certain keys are flagged as KE_IGNORE. All of these are either
+ * notifications (rather than requests for change) or are also sent
+ * via the keyboard controller so should not be sent again.
+ */
static struct key_entry dell_wmi_keymap[] = {
{KE_KEY, 0xe045, KEY_PROG1},
+ {KE_KEY, 0xe009, KEY_EJECTCD},
+
+ /* These also contain the brightness level at offset 6 */
+ {KE_KEY, 0xe006, KEY_BRIGHTNESSUP},
+ {KE_KEY, 0xe005, KEY_BRIGHTNESSDOWN},
+
+ /* Battery health status button */
+ {KE_KEY, 0xe007, KEY_BATTERY},
+
+ /* This is actually for all radios. Although physically a
+ * switch, the notification does not provide an indication of
+ * state and so it should be reported as a key */
+ {KE_KEY, 0xe008, KEY_WLAN},
+
+ /* The next device is at offset 6, the active devices are at
+ offset 8 and the attached devices at offset 10 */
+ {KE_KEY, 0xe00b, KEY_DISPLAYTOGGLE},
+
+ {KE_IGNORE, 0xe00c, KEY_KBDILLUMTOGGLE},
+
+ /* BIOS error detected */
+ {KE_IGNORE, 0xe00d, KEY_RESERVED},
+
+ /* Wifi Catcher */
+ {KE_KEY, 0xe011, KEY_PROG2},
+
+ /* Ambient light sensor toggle */
+ {KE_IGNORE, 0xe013, KEY_RESERVED},
+
+ {KE_IGNORE, 0xe020, KEY_MUTE},
+ {KE_IGNORE, 0xe02e, KEY_VOLUMEDOWN},
+ {KE_IGNORE, 0xe030, KEY_VOLUMEUP},
+ {KE_IGNORE, 0xe033, KEY_KBDILLUMUP},
+ {KE_IGNORE, 0xe034, KEY_KBDILLUMDOWN},
+ {KE_IGNORE, 0xe03a, KEY_CAPSLOCK},
+ {KE_IGNORE, 0xe045, KEY_NUMLOCK},
+ {KE_IGNORE, 0xe046, KEY_SCROLLLOCK},
{KE_END, 0}
};
@@ -122,15 +165,20 @@ static void dell_wmi_notify(u32 value, void *context)
if (obj && obj->type == ACPI_TYPE_BUFFER) {
int *buffer = (int *)obj->buffer.pointer;
- key = dell_wmi_get_entry_by_scancode(buffer[1]);
+ /*
+ * The upper bytes of the event may contain
+ * additional information, so mask them off for the
+ * scancode lookup
+ */
+ key = dell_wmi_get_entry_by_scancode(buffer[1] & 0xFFFF);
if (key) {
input_report_key(dell_wmi_input_dev, key->keycode, 1);
input_sync(dell_wmi_input_dev);
input_report_key(dell_wmi_input_dev, key->keycode, 0);
input_sync(dell_wmi_input_dev);
- } else
+ } else if (buffer[1] & 0xFFFF)
printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
- buffer[1]);
+ buffer[1] & 0xFFFF);
}
}
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 8153b3e5918..4207b26ff99 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -62,7 +62,10 @@ enum {
DISABLE_ASL_GPS = 0x0020,
DISABLE_ASL_DISPLAYSWITCH = 0x0040,
DISABLE_ASL_MODEM = 0x0080,
- DISABLE_ASL_CARDREADER = 0x0100
+ DISABLE_ASL_CARDREADER = 0x0100,
+ DISABLE_ASL_3G = 0x0200,
+ DISABLE_ASL_WIMAX = 0x0400,
+ DISABLE_ASL_HWCF = 0x0800
};
enum {
@@ -87,7 +90,13 @@ enum {
CM_ASL_USBPORT3,
CM_ASL_MODEM,
CM_ASL_CARDREADER,
- CM_ASL_LID
+ CM_ASL_3G,
+ CM_ASL_WIMAX,
+ CM_ASL_HWCF,
+ CM_ASL_LID,
+ CM_ASL_TYPE,
+ CM_ASL_PANELPOWER, /*P901*/
+ CM_ASL_TPD
};
static const char *cm_getv[] = {
@@ -96,7 +105,8 @@ static const char *cm_getv[] = {
NULL, "PBLG", NULL, NULL,
"CFVG", NULL, NULL, NULL,
"USBG", NULL, NULL, "MODG",
- "CRDG", "LIDG"
+ "CRDG", "M3GG", "WIMG", "HWCF",
+ "LIDG", "TYPE", "PBPG", "TPDG"
};
static const char *cm_setv[] = {
@@ -105,7 +115,8 @@ static const char *cm_setv[] = {
"SDSP", "PBLS", "HDPS", NULL,
"CFVS", NULL, NULL, NULL,
"USBG", NULL, NULL, "MODS",
- "CRDS", NULL
+ "CRDS", "M3GS", "WIMS", NULL,
+ NULL, NULL, "PBPS", "TPDS"
};
#define EEEPC_EC "\\_SB.PCI0.SBRG.EC0."
@@ -181,6 +192,7 @@ static struct key_entry eeepc_keymap[] = {
static int eeepc_hotk_add(struct acpi_device *device);
static int eeepc_hotk_remove(struct acpi_device *device, int type);
static int eeepc_hotk_resume(struct acpi_device *device);
+static void eeepc_hotk_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id eeepc_device_ids[] = {
{EEEPC_HOTK_HID, 0},
@@ -192,10 +204,12 @@ static struct acpi_driver eeepc_hotk_driver = {
.name = EEEPC_HOTK_NAME,
.class = EEEPC_HOTK_CLASS,
.ids = eeepc_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = eeepc_hotk_add,
.remove = eeepc_hotk_remove,
.resume = eeepc_hotk_resume,
+ .notify = eeepc_hotk_notify,
},
};
@@ -318,6 +332,15 @@ static const struct rfkill_ops eeepc_rfkill_ops = {
.set_block = eeepc_rfkill_set,
};
+static void __init eeepc_enable_camera(void)
+{
+ /*
+ * If the following call to set_acpi() fails, it's because there's no
+ * camera so we can ignore the error.
+ */
+ set_acpi(CM_ASL_CAMERA, 1);
+}
+
/*
* Sys helpers
*/
@@ -369,13 +392,88 @@ static ssize_t show_sys_acpi(int cm, char *buf)
EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
-EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV);
+
+struct eeepc_cpufv {
+ int num;
+ int cur;
+};
+
+static int get_cpufv(struct eeepc_cpufv *c)
+{
+ c->cur = get_acpi(CM_ASL_CPUFV);
+ c->num = (c->cur >> 8) & 0xff;
+ c->cur &= 0xff;
+ if (c->cur < 0 || c->num <= 0 || c->num > 12)
+ return -ENODEV;
+ return 0;
+}
+
+static ssize_t show_available_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct eeepc_cpufv c;
+ int i;
+ ssize_t len = 0;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ for (i = 0; i < c.num; i++)
+ len += sprintf(buf + len, "%d ", i);
+ len += sprintf(buf + len, "\n");
+ return len;
+}
+
+static ssize_t show_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct eeepc_cpufv c;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ return sprintf(buf, "%#x\n", (c.num << 8) | c.cur);
+}
+
+static ssize_t store_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct eeepc_cpufv c;
+ int rv, value;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ rv = parse_arg(buf, count, &value);
+ if (rv < 0)
+ return rv;
+ if (!rv || value < 0 || value >= c.num)
+ return -EINVAL;
+ set_acpi(CM_ASL_CPUFV, value);
+ return rv;
+}
+
+static struct device_attribute dev_attr_cpufv = {
+ .attr = {
+ .name = "cpufv",
+ .mode = 0644 },
+ .show = show_cpufv,
+ .store = store_cpufv
+};
+
+static struct device_attribute dev_attr_available_cpufv = {
+ .attr = {
+ .name = "available_cpufv",
+ .mode = 0444 },
+ .show = show_available_cpufv
+};
static struct attribute *platform_attributes[] = {
&dev_attr_camera.attr,
&dev_attr_cardr.attr,
&dev_attr_disp.attr,
&dev_attr_cpufv.attr,
+ &dev_attr_available_cpufv.attr,
NULL
};
@@ -558,7 +656,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
eeepc_rfkill_hotplug();
}
-static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
{
static struct key_entry *key;
u16 count;
@@ -566,6 +664,8 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
if (!ehotk)
return;
+ if (event > ACPI_MAX_SYS_NOTIFY)
+ return;
if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
brn = notify_brn();
count = ehotk->event_count[event % 128]++;
@@ -646,7 +746,6 @@ static void eeepc_unregister_rfkill_notifier(char *node)
static int eeepc_hotk_add(struct acpi_device *device)
{
- acpi_status status = AE_OK;
int result;
if (!device)
@@ -664,10 +763,6 @@ static int eeepc_hotk_add(struct acpi_device *device)
result = eeepc_hotk_check();
if (result)
goto ehotk_fail;
- status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
- eeepc_hotk_notify, ehotk);
- if (ACPI_FAILURE(status))
- printk(EEEPC_ERR "Error installing notify handler\n");
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
@@ -725,14 +820,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
static int eeepc_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
- eeepc_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(EEEPC_ERR "Error removing notify handler\n");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
@@ -989,6 +1078,9 @@ static int __init eeepc_laptop_init(void)
result = eeepc_hwmon_init(dev);
if (result)
goto fail_hwmon;
+
+ eeepc_enable_camera();
+
/* Register platform stuff */
result = platform_driver_register(&platform_driver);
if (result)
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 16fffe44e33..4ac2311c00a 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -47,7 +47,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
#define HPWMI_DISPLAY_QUERY 0x1
#define HPWMI_HDDTEMP_QUERY 0x2
#define HPWMI_ALS_QUERY 0x3
-#define HPWMI_DOCK_QUERY 0x4
+#define HPWMI_HARDWARE_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
#define HPWMI_HOTKEY_QUERY 0xc
@@ -75,10 +75,9 @@ struct key_entry {
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_END };
static struct key_entry hp_wmi_keymap[] = {
- {KE_SW, 0x01, SW_DOCK},
{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
{KE_KEY, 0x20e6, KEY_PROG1},
@@ -151,7 +150,22 @@ static int hp_wmi_als_state(void)
static int hp_wmi_dock_state(void)
{
- return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return ret & 0x1;
+}
+
+static int hp_wmi_tablet_state(void)
+{
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return (ret & 0x4) ? 1 : 0;
}
static int hp_wmi_set_block(void *data, bool blocked)
@@ -232,6 +246,15 @@ static ssize_t show_dock(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%d\n", value);
}
+static ssize_t show_tablet(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int value = hp_wmi_tablet_state();
+ if (value < 0)
+ return -EINVAL;
+ return sprintf(buf, "%d\n", value);
+}
+
static ssize_t set_als(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -244,6 +267,7 @@ static DEVICE_ATTR(display, S_IRUGO, show_display, NULL);
static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
+static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
{
@@ -326,13 +350,13 @@ static void hp_wmi_notify(u32 value, void *context)
key->keycode, 0);
input_sync(hp_wmi_input_dev);
break;
- case KE_SW:
- input_report_switch(hp_wmi_input_dev,
- key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
+ } else if (eventcode == 0x1) {
+ input_report_switch(hp_wmi_input_dev, SW_DOCK,
+ hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
} else if (eventcode == 0x5) {
if (wifi_rfkill)
rfkill_set_sw_state(wifi_rfkill,
@@ -369,18 +393,19 @@ static int __init hp_wmi_input_setup(void)
set_bit(EV_KEY, hp_wmi_input_dev->evbit);
set_bit(key->keycode, hp_wmi_input_dev->keybit);
break;
- case KE_SW:
- set_bit(EV_SW, hp_wmi_input_dev->evbit);
- set_bit(key->keycode, hp_wmi_input_dev->swbit);
-
- /* Set initial dock state */
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
}
+ set_bit(EV_SW, hp_wmi_input_dev->evbit);
+ set_bit(SW_DOCK, hp_wmi_input_dev->swbit);
+ set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
+
+ /* Set initial hardware state */
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
+
err = input_register_device(hp_wmi_input_dev);
if (err) {
@@ -397,6 +422,7 @@ static void cleanup_sysfs(struct platform_device *device)
device_remove_file(&device->dev, &dev_attr_hddtemp);
device_remove_file(&device->dev, &dev_attr_als);
device_remove_file(&device->dev, &dev_attr_dock);
+ device_remove_file(&device->dev, &dev_attr_tablet);
}
static int __init hp_wmi_bios_setup(struct platform_device *device)
@@ -416,6 +442,9 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
err = device_create_file(&device->dev, &dev_attr_dock);
if (err)
goto add_sysfs_error;
+ err = device_create_file(&device->dev, &dev_attr_tablet);
+ if (err)
+ goto add_sysfs_error;
if (wireless & 0x1) {
wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
@@ -485,23 +514,17 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
static int hp_wmi_resume_handler(struct platform_device *device)
{
- struct key_entry *key;
-
/*
- * Docking state may have changed while suspended, so trigger
- * an input event for the current state. As this is a switch,
+ * Hardware state may have changed while suspended, so trigger
+ * input events for the current state. As this is a switch,
* the input layer will only actually pass it on if the state
* changed.
*/
- for (key = hp_wmi_keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_SW:
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
- }
- }
+
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
return 0;
}
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 40d64c03278..a463fd72c49 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -22,7 +22,7 @@
*/
#define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020300
+#define TPACPI_SYSFS_VERSION 0x020400
/*
* Changelog:
@@ -257,6 +257,8 @@ static struct {
u32 wan:1;
u32 uwb:1;
u32 fan_ctrl_status_undef:1;
+ u32 second_fan:1;
+ u32 beep_needs_two_args:1;
u32 input_device_registered:1;
u32 platform_drv_registered:1;
u32 platform_drv_attrs_registered:1;
@@ -277,8 +279,10 @@ struct thinkpad_id_data {
char *bios_version_str; /* Something like 1ZET51WW (1.03z) */
char *ec_version_str; /* Something like 1ZHT51WW-1.04a */
- u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */
+ u16 bios_model; /* 1Y = 0x5931, 0 = unknown */
u16 ec_model;
+ u16 bios_release; /* 1ZETK1WW = 0x314b, 0 = unknown */
+ u16 ec_release;
char *model_str; /* ThinkPad T43 */
char *nummodel_str; /* 9384A9C for a 9384-A9C model */
@@ -355,6 +359,73 @@ static void tpacpi_log_usertask(const char * const what)
} \
} while (0)
+/*
+ * Quirk handling helpers
+ *
+ * ThinkPad IDs and versions seen in the field so far
+ * are two-characters from the set [0-9A-Z], i.e. base 36.
+ *
+ * We use values well outside that range as specials.
+ */
+
+#define TPACPI_MATCH_ANY 0xffffU
+#define TPACPI_MATCH_UNKNOWN 0U
+
+/* TPID('1', 'Y') == 0x5931 */
+#define TPID(__c1, __c2) (((__c2) << 8) | (__c1))
+
+#define TPACPI_Q_IBM(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+#define TPACPI_Q_LNV(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+struct tpacpi_quirk {
+ unsigned int vendor;
+ u16 bios;
+ u16 ec;
+ unsigned long quirks;
+};
+
+/**
+ * tpacpi_check_quirks() - search BIOS/EC version on a list
+ * @qlist: array of &struct tpacpi_quirk
+ * @qlist_size: number of elements in @qlist
+ *
+ * Iterates over a quirks list until one is found that matches the
+ * ThinkPad's vendor, BIOS and EC model.
+ *
+ * Returns 0 if nothing matches, otherwise returns the quirks field of
+ * the matching &struct tpacpi_quirk entry.
+ *
+ * The match criteria is: vendor, ec and bios much match.
+ */
+static unsigned long __init tpacpi_check_quirks(
+ const struct tpacpi_quirk *qlist,
+ unsigned int qlist_size)
+{
+ while (qlist_size) {
+ if ((qlist->vendor == thinkpad_id.vendor ||
+ qlist->vendor == TPACPI_MATCH_ANY) &&
+ (qlist->bios == thinkpad_id.bios_model ||
+ qlist->bios == TPACPI_MATCH_ANY) &&
+ (qlist->ec == thinkpad_id.ec_model ||
+ qlist->ec == TPACPI_MATCH_ANY))
+ return qlist->quirks;
+
+ qlist_size--;
+ qlist++;
+ }
+ return 0;
+}
+
+
/****************************************************************************
****************************************************************************
*
@@ -2880,7 +2951,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
/* update bright_acpimode... */
tpacpi_check_std_acpi_brightness_support();
- if (tp_features.bright_acpimode) {
+ if (tp_features.bright_acpimode && acpi_video_backlight_support()) {
printk(TPACPI_INFO
"This ThinkPad has standard ACPI backlight "
"brightness control, supported by the ACPI "
@@ -4773,7 +4844,7 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */
"LED", /* all others */
); /* R30, R31 */
-#define TPACPI_LED_NUMLEDS 8
+#define TPACPI_LED_NUMLEDS 16
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
@@ -4786,15 +4857,20 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
"tpacpi::dock_batt",
"tpacpi::unknown_led",
"tpacpi::standby",
+ "tpacpi::dock_status1",
+ "tpacpi::dock_status2",
+ "tpacpi::unknown_led2",
+ "tpacpi::unknown_led3",
+ "tpacpi::thinkvantage",
};
-#define TPACPI_SAFE_LEDS 0x0081U
+#define TPACPI_SAFE_LEDS 0x1081U
static inline bool tpacpi_is_led_restricted(const unsigned int led)
{
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
return false;
#else
- return (TPACPI_SAFE_LEDS & (1 << led)) == 0;
+ return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
#endif
}
@@ -4956,6 +5032,10 @@ static int __init tpacpi_init_led(unsigned int led)
tpacpi_leds[led].led = led;
+ /* LEDs with no name don't get registered */
+ if (!tpacpi_led_names[led])
+ return 0;
+
tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set;
tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set;
if (led_supported == TPACPI_LED_570)
@@ -4974,10 +5054,59 @@ static int __init tpacpi_init_led(unsigned int led)
return rc;
}
+static const struct tpacpi_quirk led_useful_qtable[] __initconst = {
+ TPACPI_Q_IBM('1', 'E', 0x009f), /* A30 */
+ TPACPI_Q_IBM('1', 'N', 0x009f), /* A31 */
+ TPACPI_Q_IBM('1', 'G', 0x009f), /* A31 */
+
+ TPACPI_Q_IBM('1', 'I', 0x0097), /* T30 */
+ TPACPI_Q_IBM('1', 'R', 0x0097), /* T40, T41, T42, R50, R51 */
+ TPACPI_Q_IBM('7', '0', 0x0097), /* T43, R52 */
+ TPACPI_Q_IBM('1', 'Y', 0x0097), /* T43 */
+ TPACPI_Q_IBM('1', 'W', 0x0097), /* R50e */
+ TPACPI_Q_IBM('1', 'V', 0x0097), /* R51 */
+ TPACPI_Q_IBM('7', '8', 0x0097), /* R51e */
+ TPACPI_Q_IBM('7', '6', 0x0097), /* R52 */
+
+ TPACPI_Q_IBM('1', 'K', 0x00bf), /* X30 */
+ TPACPI_Q_IBM('1', 'Q', 0x00bf), /* X31, X32 */
+ TPACPI_Q_IBM('1', 'U', 0x00bf), /* X40 */
+ TPACPI_Q_IBM('7', '4', 0x00bf), /* X41 */
+ TPACPI_Q_IBM('7', '5', 0x00bf), /* X41t */
+
+ TPACPI_Q_IBM('7', '9', 0x1f97), /* T60 (1) */
+ TPACPI_Q_IBM('7', '7', 0x1f97), /* Z60* (1) */
+ TPACPI_Q_IBM('7', 'F', 0x1f97), /* Z61* (1) */
+ TPACPI_Q_IBM('7', 'B', 0x1fb7), /* X60 (1) */
+
+ /* (1) - may have excess leds enabled on MSB */
+
+ /* Defaults (order matters, keep last, don't reorder!) */
+ { /* Lenovo */
+ .vendor = PCI_VENDOR_ID_LENOVO,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x1fffU,
+ },
+ { /* IBM ThinkPads with no EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_UNKNOWN,
+ .quirks = 0x00ffU,
+ },
+ { /* IBM ThinkPads with EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x00bfU,
+ },
+};
+
+#undef TPACPI_LEDQ_IBM
+#undef TPACPI_LEDQ_LNV
+
static int __init led_init(struct ibm_init_struct *iibm)
{
unsigned int i;
int rc;
+ unsigned long useful_leds;
vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
@@ -4999,6 +5128,9 @@ static int __init led_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
str_supported(led_supported), led_supported);
+ if (led_supported == TPACPI_LED_NONE)
+ return 1;
+
tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
GFP_KERNEL);
if (!tpacpi_leds) {
@@ -5006,8 +5138,12 @@ static int __init led_init(struct ibm_init_struct *iibm)
return -ENOMEM;
}
+ useful_leds = tpacpi_check_quirks(led_useful_qtable,
+ ARRAY_SIZE(led_useful_qtable));
+
for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
- if (!tpacpi_is_led_restricted(i)) {
+ if (!tpacpi_is_led_restricted(i) &&
+ test_bit(i, &useful_leds)) {
rc = tpacpi_init_led(i);
if (rc < 0) {
led_exit();
@@ -5017,12 +5153,11 @@ static int __init led_init(struct ibm_init_struct *iibm)
}
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
- if (led_supported != TPACPI_LED_NONE)
- printk(TPACPI_NOTICE
- "warning: userspace override of important "
- "firmware LEDs is enabled\n");
+ printk(TPACPI_NOTICE
+ "warning: userspace override of important "
+ "firmware LEDs is enabled\n");
#endif
- return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+ return 0;
}
#define str_led_status(s) \
@@ -5052,7 +5187,7 @@ static int led_read(char *p)
}
len += sprintf(p + len, "commands:\t"
- "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+ "<led> on, <led> off, <led> blink (<led> is 0-15)\n");
return len;
}
@@ -5067,7 +5202,7 @@ static int led_write(char *buf)
return -ENODEV;
while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+ if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 15)
return -EINVAL;
if (strstr(cmd, "off")) {
@@ -5101,8 +5236,17 @@ static struct ibm_struct led_driver_data = {
TPACPI_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
+#define TPACPI_BEEP_Q1 0x0001
+
+static const struct tpacpi_quirk beep_quirk_table[] __initconst = {
+ TPACPI_Q_IBM('I', 'M', TPACPI_BEEP_Q1), /* 570 */
+ TPACPI_Q_IBM('I', 'U', TPACPI_BEEP_Q1), /* 570E - unverified */
+};
+
static int __init beep_init(struct ibm_init_struct *iibm)
{
+ unsigned long quirks;
+
vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
TPACPI_ACPIHANDLE_INIT(beep);
@@ -5110,6 +5254,11 @@ static int __init beep_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
str_supported(beep_handle != NULL));
+ quirks = tpacpi_check_quirks(beep_quirk_table,
+ ARRAY_SIZE(beep_quirk_table));
+
+ tp_features.beep_needs_two_args = !!(quirks & TPACPI_BEEP_Q1);
+
return (beep_handle)? 0 : 1;
}
@@ -5141,8 +5290,15 @@ static int beep_write(char *buf)
/* beep_cmd set */
} else
return -EINVAL;
- if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
- return -EIO;
+ if (tp_features.beep_needs_two_args) {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vdd",
+ beep_cmd, 0))
+ return -EIO;
+ } else {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vd",
+ beep_cmd))
+ return -EIO;
+ }
}
return 0;
@@ -5569,6 +5725,10 @@ static struct ibm_struct ecdump_driver_data = {
* Bit 3-0: backlight brightness level
*
* brightness_get_raw returns status data in the HBRV layout
+ *
+ * WARNING: The X61 has been verified to use HBRV for something else, so
+ * this should be used _only_ on IBM ThinkPads, and maybe with some careful
+ * testing on the very early *60 Lenovo models...
*/
enum {
@@ -5869,6 +6029,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
brightness_mode);
}
+ /* Safety */
+ if (thinkpad_id.vendor != PCI_VENDOR_ID_IBM &&
+ (brightness_mode == TPACPI_BRGHT_MODE_ECNVRAM ||
+ brightness_mode == TPACPI_BRGHT_MODE_EC))
+ return -EINVAL;
+
if (tpacpi_brightness_get_raw(&b) < 0)
return 1;
@@ -6161,6 +6327,21 @@ static struct ibm_struct volume_driver_data = {
* For firmware bugs, refer to:
* http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
*
+ * ----
+ *
+ * ThinkPad EC register 0x31 bit 0 (only on select models)
+ *
+ * When bit 0 of EC register 0x31 is zero, the tachometer registers
+ * show the speed of the main fan. When bit 0 of EC register 0x31
+ * is one, the tachometer registers show the speed of the auxiliary
+ * fan.
+ *
+ * Fan control seems to affect both fans, regardless of the state
+ * of this bit.
+ *
+ * So far, only the firmware for the X60/X61 non-tablet versions
+ * seem to support this (firmware TP-7M).
+ *
* TPACPI_FAN_WR_ACPI_FANS:
* ThinkPad X31, X40, X41. Not available in the X60.
*
@@ -6187,6 +6368,8 @@ enum { /* Fan control constants */
fan_status_offset = 0x2f, /* EC register 0x2f */
fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
* 0x84 must be read before 0x85 */
+ fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M)
+ bit 0 selects which fan is active */
TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */
TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */
@@ -6249,30 +6432,18 @@ TPACPI_HANDLE(sfan, ec, "SFAN", /* 570 */
* We assume 0x07 really means auto mode while this quirk is active,
* as this is far more likely than the ThinkPad being in level 7,
* which is only used by the firmware during thermal emergencies.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e), TP-76 (R52),
+ * TP-70 (T43, R52), which are known to be buggy.
*/
-static void fan_quirk1_detect(void)
+static void fan_quirk1_setup(void)
{
- /* In some ThinkPads, neither the EC nor the ACPI
- * DSDT initialize the HFSP register, and it ends up
- * being initially set to 0x07 when it *could* be
- * either 0x07 or 0x80.
- *
- * Enable for TP-1Y (T43), TP-78 (R51e),
- * TP-76 (R52), TP-70 (T43, R52), which are known
- * to be buggy. */
if (fan_control_initial_status == 0x07) {
- switch (thinkpad_id.ec_model) {
- case 0x5931: /* TP-1Y */
- case 0x3837: /* TP-78 */
- case 0x3637: /* TP-76 */
- case 0x3037: /* TP-70 */
- printk(TPACPI_NOTICE
- "fan_init: initial fan status is unknown, "
- "assuming it is in auto mode\n");
- tp_features.fan_ctrl_status_undef = 1;
- ;;
- }
+ printk(TPACPI_NOTICE
+ "fan_init: initial fan status is unknown, "
+ "assuming it is in auto mode\n");
+ tp_features.fan_ctrl_status_undef = 1;
}
}
@@ -6292,6 +6463,38 @@ static void fan_quirk1_handle(u8 *fan_status)
}
}
+/* Select main fan on X60/X61, NOOP on others */
+static bool fan_select_fan1(void)
+{
+ if (tp_features.second_fan) {
+ u8 val;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val &= 0xFEU;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+ }
+ return true;
+}
+
+/* Select secondary fan on X60/X61 */
+static bool fan_select_fan2(void)
+{
+ u8 val;
+
+ if (!tp_features.second_fan)
+ return false;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val |= 0x01U;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+
+ return true;
+}
+
/*
* Call with fan_mutex held
*/
@@ -6369,6 +6572,8 @@ static int fan_get_speed(unsigned int *speed)
switch (fan_status_access_mode) {
case TPACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan1()))
+ return -EIO;
if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
!acpi_ec_read(fan_rpm_offset + 1, &hi)))
return -EIO;
@@ -6385,6 +6590,34 @@ static int fan_get_speed(unsigned int *speed)
return 0;
}
+static int fan2_get_speed(unsigned int *speed)
+{
+ u8 hi, lo;
+ bool rc;
+
+ switch (fan_status_access_mode) {
+ case TPACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan2()))
+ return -EIO;
+ rc = !acpi_ec_read(fan_rpm_offset, &lo) ||
+ !acpi_ec_read(fan_rpm_offset + 1, &hi);
+ fan_select_fan1(); /* play it safe */
+ if (rc)
+ return -EIO;
+
+ if (likely(speed))
+ *speed = (hi << 8) | lo;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
static int fan_set_level(int level)
{
if (!fan_control_allowed)
@@ -6790,6 +7023,25 @@ static struct device_attribute dev_attr_fan_fan1_input =
__ATTR(fan1_input, S_IRUGO,
fan_fan1_input_show, NULL);
+/* sysfs fan fan2_input ------------------------------------------------ */
+static ssize_t fan_fan2_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res;
+ unsigned int speed;
+
+ res = fan2_get_speed(&speed);
+ if (res < 0)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan2_input =
+ __ATTR(fan2_input, S_IRUGO,
+ fan_fan2_input_show, NULL);
+
/* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
char *buf)
@@ -6823,6 +7075,7 @@ static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO,
static struct attribute *fan_attributes[] = {
&dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
&dev_attr_fan_fan1_input.attr,
+ NULL, /* for fan2_input */
NULL
};
@@ -6830,9 +7083,36 @@ static const struct attribute_group fan_attr_group = {
.attrs = fan_attributes,
};
+#define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */
+#define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */
+
+#define TPACPI_FAN_QI(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+#define TPACPI_FAN_QL(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
+ TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1),
+ TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN),
+};
+
+#undef TPACPI_FAN_QL
+#undef TPACPI_FAN_QI
+
static int __init fan_init(struct ibm_init_struct *iibm)
{
int rc;
+ unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
"initializing fan subdriver\n");
@@ -6843,12 +7123,16 @@ static int __init fan_init(struct ibm_init_struct *iibm)
fan_control_commands = 0;
fan_watchdog_maxinterval = 0;
tp_features.fan_ctrl_status_undef = 0;
+ tp_features.second_fan = 0;
fan_control_desired_level = 7;
TPACPI_ACPIHANDLE_INIT(fans);
TPACPI_ACPIHANDLE_INIT(gfan);
TPACPI_ACPIHANDLE_INIT(sfan);
+ quirks = tpacpi_check_quirks(fan_quirk_table,
+ ARRAY_SIZE(fan_quirk_table));
+
if (gfan_handle) {
/* 570, 600e/x, 770e, 770x */
fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
@@ -6858,7 +7142,13 @@ static int __init fan_init(struct ibm_init_struct *iibm)
if (likely(acpi_ec_read(fan_status_offset,
&fan_control_initial_status))) {
fan_status_access_mode = TPACPI_FAN_RD_TPEC;
- fan_quirk1_detect();
+ if (quirks & TPACPI_FAN_Q1)
+ fan_quirk1_setup();
+ if (quirks & TPACPI_FAN_2FAN) {
+ tp_features.second_fan = 1;
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
+ "secondary fan support enabled\n");
+ }
} else {
printk(TPACPI_ERR
"ThinkPad ACPI EC access misbehaving, "
@@ -6914,6 +7204,11 @@ static int __init fan_init(struct ibm_init_struct *iibm)
if (fan_status_access_mode != TPACPI_FAN_NONE ||
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+ if (tp_features.second_fan) {
+ /* attach second fan tachometer */
+ fan_attributes[ARRAY_SIZE(fan_attributes)-2] =
+ &dev_attr_fan_fan2_input.attr;
+ }
rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
if (rc < 0)
@@ -7385,6 +7680,24 @@ err_out:
/* Probing */
+static bool __pure __init tpacpi_is_fw_digit(const char c)
+{
+ return (c >= '0' && c <= '9') || (c >= 'A' && c <= 'Z');
+}
+
+/* Most models: xxyTkkWW (#.##c); Ancient 570/600 and -SL lacks (#.##c) */
+static bool __pure __init tpacpi_is_valid_fw_id(const char* const s,
+ const char t)
+{
+ return s && strlen(s) >= 8 &&
+ tpacpi_is_fw_digit(s[0]) &&
+ tpacpi_is_fw_digit(s[1]) &&
+ s[2] == t && s[3] == 'T' &&
+ tpacpi_is_fw_digit(s[4]) &&
+ tpacpi_is_fw_digit(s[5]) &&
+ s[6] == 'W' && s[7] == 'W';
+}
+
/* returns 0 - probe ok, or < 0 - probe error.
* Probe ok doesn't mean thinkpad found.
* On error, kfree() cleanup on tp->* is not performed, caller must do it */
@@ -7411,10 +7724,15 @@ static int __must_check __init get_thinkpad_model_data(
tp->bios_version_str = kstrdup(s, GFP_KERNEL);
if (s && !tp->bios_version_str)
return -ENOMEM;
- if (!tp->bios_version_str)
+
+ /* Really ancient ThinkPad 240X will fail this, which is fine */
+ if (!tpacpi_is_valid_fw_id(tp->bios_version_str, 'E'))
return 0;
+
tp->bios_model = tp->bios_version_str[0]
| (tp->bios_version_str[1] << 8);
+ tp->bios_release = (tp->bios_version_str[4] << 8)
+ | tp->bios_version_str[5];
/*
* ThinkPad T23 or newer, A31 or newer, R50e or newer,
@@ -7433,8 +7751,21 @@ static int __must_check __init get_thinkpad_model_data(
tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
if (!tp->ec_version_str)
return -ENOMEM;
- tp->ec_model = ec_fw_string[0]
- | (ec_fw_string[1] << 8);
+
+ if (tpacpi_is_valid_fw_id(ec_fw_string, 'H')) {
+ tp->ec_model = ec_fw_string[0]
+ | (ec_fw_string[1] << 8);
+ tp->ec_release = (ec_fw_string[4] << 8)
+ | ec_fw_string[5];
+ } else {
+ printk(TPACPI_NOTICE
+ "ThinkPad firmware release %s "
+ "doesn't match the known patterns\n",
+ ec_fw_string);
+ printk(TPACPI_NOTICE
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ }
break;
}
}