diff options
Diffstat (limited to 'drivers/scsi/libata-bmdma.c')
| -rw-r--r-- | drivers/scsi/libata-bmdma.c | 1149 |
1 files changed, 0 insertions, 1149 deletions
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c deleted file mode 100644 index 9ce221f2595..00000000000 --- a/drivers/scsi/libata-bmdma.c +++ /dev/null @@ -1,1149 +0,0 @@ -/* - * libata-bmdma.c - helper library for PCI IDE BMDMA - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2006 Red Hat, Inc. All rights reserved. - * Copyright 2003-2006 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/libata.h> - -#include "libata.h" - -/** - * ata_tf_load_pio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - outb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - outb(tf->hob_feature, ioaddr->feature_addr); - outb(tf->hob_nsect, ioaddr->nsect_addr); - outb(tf->hob_lbal, ioaddr->lbal_addr); - outb(tf->hob_lbam, ioaddr->lbam_addr); - outb(tf->hob_lbah, ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - outb(tf->feature, ioaddr->feature_addr); - outb(tf->nsect, ioaddr->nsect_addr); - outb(tf->lbal, ioaddr->lbal_addr); - outb(tf->lbam, ioaddr->lbam_addr); - outb(tf->lbah, ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - outb(tf->device, ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * ata_tf_load_mmio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - writeb(tf->device, (void __iomem *) ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - - -/** - * ata_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO - * or PIO as indicated by the ATA_FLAG_MMIO flag. - * Writes the control, feature, nsect, lbal, lbam, and lbah registers. - * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, - * hob_lbal, hob_lbam, and hob_lbah. - * - * This function waits for idle (!BUSY and !DRQ) after writing - * registers. If the control register has a new value, this - * function also waits for idle after writing control and before - * writing the remaining registers. - * - * May be used as the tf_load() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_load_mmio(ap, tf); - else - ata_tf_load_pio(ap, tf); -} - -/** - * ata_exec_command_pio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - outb(tf->command, ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command_mmio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * FIXME: missing write posting for 400nS delay enforcement - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO/MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_exec_command_mmio(ap, tf); - else - ata_exec_command_pio(ap, tf); -} - -/** - * ata_tf_read_pio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = inb(ioaddr->error_addr); - tf->nsect = inb(ioaddr->nsect_addr); - tf->lbal = inb(ioaddr->lbal_addr); - tf->lbam = inb(ioaddr->lbam_addr); - tf->lbah = inb(ioaddr->lbah_addr); - tf->device = inb(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = inb(ioaddr->error_addr); - tf->hob_nsect = inb(ioaddr->nsect_addr); - tf->hob_lbal = inb(ioaddr->lbal_addr); - tf->hob_lbam = inb(ioaddr->lbam_addr); - tf->hob_lbah = inb(ioaddr->lbah_addr); - } -} - -/** - * ata_tf_read_mmio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf via MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = readb((void __iomem *)ioaddr->error_addr); - tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); - tf->device = readb((void __iomem *)ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); - tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); - tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); - } -} - - -/** - * ata_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 - * is set, also reads the hob registers. - * - * May be used as the tf_read() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_read_mmio(ap, tf); - else - ata_tf_read_pio(ap, tf); -} - -/** - * ata_check_status_pio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_pio(struct ata_port *ap) -{ - return inb(ap->ioaddr.status_addr); -} - -/** - * ata_check_status_mmio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * via MMIO and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_mmio(struct ata_port *ap) -{ - return readb((void __iomem *) ap->ioaddr.status_addr); -} - - -/** - * ata_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * May be used as the check_status() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_check_status(struct ata_port *ap) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_check_status_mmio(ap); - return ata_check_status_pio(ap); -} - - -/** - * ata_altstatus - Read device alternate status reg - * @ap: port where the device is - * - * Reads ATA taskfile alternate status register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_altstatus() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_altstatus(struct ata_port *ap) -{ - if (ap->ops->check_altstatus) - return ap->ops->check_altstatus(ap); - - if (ap->flags & ATA_FLAG_MMIO) - return readb((void __iomem *)ap->ioaddr.altstatus_addr); - return inb(ap->ioaddr.altstatus_addr); -} - -/** - * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = readb(mmio + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - writeb(dmactl, mmio + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = readb(mmio + ATA_DMA_CMD); - writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - - /* Strictly, one may wish to issue a readb() here, to - * flush the mmio write. However, control also passes - * to the hardware at this point, and it will interrupt - * us when we are to resume control. So, in effect, - * we don't care when the mmio write flushes. - * Further, a read of the DMA status register _immediately_ - * following the write may not be what certain flaky hardware - * is expected, so I think it is best to not add a readb() - * without first all the MMIO ATA cards/mobos. - * Or maybe I'm just being paranoid. - */ -} - -/** - * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - - /* load PRD table addr. */ - outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - outb(dmactl | ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); -} - - -/** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes the ATA_DMA_START flag to the DMA command register. - * - * May be used as the bmdma_start() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_bmdma_start(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_start_mmio(qc); - else - ata_bmdma_start_pio(qc); -} - - -/** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes address of PRD table to device's PRD Table Address - * register, sets the DMA control register, and calls - * ops->exec_command() to start the transfer. - * - * May be used as the bmdma_setup() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_bmdma_setup(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_setup_mmio(qc); - else - ata_bmdma_setup_pio(qc); -} - - -/** - * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Clear interrupt and error flags in DMA status register. - * - * May be used as the irq_clear() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_bmdma_irq_clear(struct ata_port *ap) -{ - if (!ap->ioaddr.bmdma_addr) - return; - - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = - ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS; - writeb(readb(mmio), mmio); - } else { - unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS; - outb(inb(addr), addr); - } -} - - -/** - * ata_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - * - * Read and return BMDMA status register. - * - * May be used as the bmdma_status() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -u8 ata_bmdma_status(struct ata_port *ap) -{ - u8 host_stat; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - host_stat = readb(mmio + ATA_DMA_STATUS); - } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - return host_stat; -} - - -/** - * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - * - * Clears the ATA_DMA_START flag in the dma control register - * - * May be used as the bmdma_stop() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* clear start/stop bit */ - writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, - mmio + ATA_DMA_CMD); - } else { - /* clear start/stop bit */ - outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - } - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_altstatus(ap); /* dummy read */ -} - -/** - * ata_bmdma_freeze - Freeze BMDMA controller port - * @ap: port to freeze - * - * Freeze BMDMA controller port. - * - * LOCKING: - * Inherited from caller. - */ -void ata_bmdma_freeze(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - ap->ctl |= ATA_NIEN; - ap->last_ctl = ap->ctl; - - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); -} - -/** - * ata_bmdma_thaw - Thaw BMDMA controller port - * @ap: port to thaw - * - * Thaw BMDMA controller port. - * - * LOCKING: - * Inherited from caller. - */ -void ata_bmdma_thaw(struct ata_port *ap) -{ - /* clear & re-enable interrupts */ - ata_chk_status(ap); - ap->ops->irq_clear(ap); - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); -} - -/** - * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller - * @ap: port to handle error for - * @prereset: prereset method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * - * Handle error for ATA BMDMA controller. It can handle both - * PATA and SATA controllers. Many controllers should be able to - * use this EH as-is or with some added handling before and - * after. - * - * This function is intended to be used for constructing - * ->error_handler callback by low level drivers. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_queued_cmd *qc; - unsigned long flags; - int thaw = 0; - - qc = __ata_qc_from_tag(ap, ap->active_tag); - if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) - qc = NULL; - - /* reset PIO HSM and stop DMA engine */ - spin_lock_irqsave(ap->lock, flags); - - ap->hsm_task_state = HSM_ST_IDLE; - - if (qc && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { - u8 host_stat; - - host_stat = ata_bmdma_status(ap); - - ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat); - - /* BMDMA controllers indicate host bus error by - * setting DMA_ERR bit and timing out. As it wasn't - * really a timeout event, adjust error mask and - * cancel frozen state. - */ - if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) { - qc->err_mask = AC_ERR_HOST_BUS; - thaw = 1; - } - - ap->ops->bmdma_stop(qc); - } - - ata_altstatus(ap); - ata_chk_status(ap); - ap->ops->irq_clear(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - if (thaw) - ata_eh_thaw_port(ap); - - /* PIO and DMA engines have been stopped, perform recovery */ - ata_do_eh(ap, prereset, softreset, hardreset, postreset); -} - -/** - * ata_bmdma_error_handler - Stock error handler for BMDMA controller - * @ap: port to handle error for - * - * Stock error handler for BMDMA controller. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_error_handler(struct ata_port *ap) -{ - ata_reset_fn_t hardreset; - - hardreset = NULL; - if (sata_scr_valid(ap)) - hardreset = sata_std_hardreset; - - ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, - ata_std_postreset); -} - -/** - * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for - * BMDMA controller - * @qc: internal command to clean up - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) -{ - ata_bmdma_stop(qc); -} - -#ifdef CONFIG_PCI -static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - - return probe_ent; -} - - -/** - * ata_pci_init_native_mode - Initialize native-mode driver - * @pdev: pci device to be initialized - * @port: array[2] of pointers to port info structures. - * @ports: bitmap of ports present - * - * Utility function which allocates and initializes an - * ata_probe_ent structure for a standard dual-port - * PIO-based IDE controller. The returned ata_probe_ent - * structure can be passed to ata_device_add(). The returned - * ata_probe_ent structure should then be freed with kfree(). - * - * The caller need only pass the address of the primary port, the - * secondary will be deduced automatically. If the device has non - * standard secondary port mappings this function can be called twice, - * once for each interface. - */ - -struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) -{ - struct ata_probe_ent *probe_ent = - ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - int p = 0; - unsigned long bmdma; - - if (!probe_ent) - return NULL; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->private_data = port[0]->private_data; - - if (ports & ATA_PORT_PRIMARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - bmdma = pci_resource_start(pdev, 4); - if (bmdma) { - if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - probe_ent->port[p].bmdma_addr = bmdma; - } - ata_std_ports(&probe_ent->port[p]); - p++; - } - - if (ports & ATA_PORT_SECONDARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - bmdma = pci_resource_start(pdev, 4); - if (bmdma) { - bmdma += 8; - if(inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - probe_ent->port[p].bmdma_addr = bmdma; - } - ata_std_ports(&probe_ent->port[p]); - p++; - } - - probe_ent->n_ports = p; - return probe_ent; -} - - -static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, - struct ata_port_info *port, int port_num) -{ - struct ata_probe_ent *probe_ent; - unsigned long bmdma; - - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); - if (!probe_ent) - return NULL; - - probe_ent->legacy_mode = 1; - probe_ent->n_ports = 1; - probe_ent->hard_port_no = port_num; - probe_ent->private_data = port->private_data; - - switch(port_num) - { - case 0: - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - break; - case 1: - probe_ent->irq = 15; - probe_ent->port[0].cmd_addr = 0x170; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x376; - break; - } - - bmdma = pci_resource_start(pdev, 4); - if (bmdma != 0) { - bmdma += 8 * port_num; - probe_ent->port[0].bmdma_addr = bmdma; - if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - } - ata_std_ports(&probe_ent->port[0]); - - return probe_ent; -} - - -/** - * ata_pci_init_one - Initialize/register PCI IDE host controller - * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller - * - * This is a helper function which can be called from a driver's - * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, negative on errno-based value on error. - */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) -{ - struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; - struct ata_port_info *port[2]; - u8 tmp8, mask; - unsigned int legacy_mode = 0; - int disable_dev_on_err = 1; - int rc; - - DPRINTK("ENTER\n"); - - port[0] = port_info[0]; - if (n_ports > 1) - port[1] = port_info[1]; - else - port[1] = port[0]; - - if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 - && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); - } - - /* FIXME... */ - if ((!legacy_mode) && (n_ports > 2)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); - n_ports = 2; - /* For now */ - } - - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - disable_dev_on_err = 0; - goto err_out; - } - - /* FIXME: Should use platform specific mappers for legacy port ranges */ - if (legacy_mode) { - if (!request_region(0x1f0, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x1f0; - res.end = 0x1f0 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 0); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 0); - - if (!request_region(0x170, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x170; - res.end = 0x170 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 1); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 1); - } - - /* we have legacy mode, but all ports are unavailable */ - if (legacy_mode == (1 << 3)) { - rc = -EBUSY; - goto err_out_regions; - } - - /* FIXME: If we get no DMA mask we should fall back to PIO */ - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (legacy_mode) { - if (legacy_mode & (1 << 0)) - probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); - if (legacy_mode & (1 << 1)) - probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); - } else { - if (n_ports == 2) - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - else - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); - } - if (!probe_ent && !probe_ent2) { - rc = -ENOMEM; - goto err_out_regions; - } - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return */ - if (legacy_mode) { - struct device *dev = &pdev->dev; - struct ata_host_set *host_set = NULL; - - if (legacy_mode & (1 << 0)) { - ata_device_add(probe_ent); - host_set = dev_get_drvdata(dev); - } - - if (legacy_mode & (1 << 1)) { - ata_device_add(probe_ent2); - if (host_set) { - host_set->next = dev_get_drvdata(dev); - dev_set_drvdata(dev, host_set); - } - } - } else - ata_device_add(probe_ent); - - kfree(probe_ent); - kfree(probe_ent2); - - return 0; - -err_out_regions: - if (legacy_mode & (1 << 0)) - release_region(0x1f0, 8); - if (legacy_mode & (1 << 1)) - release_region(0x170, 8); - pci_release_regions(pdev); -err_out: - if (disable_dev_on_err) - pci_disable_device(pdev); - return rc; -} - -/** - * ata_pci_clear_simplex - attempt to kick device out of simplex - * @pdev: PCI device - * - * Some PCI ATA devices report simplex mode but in fact can be told to - * enter non simplex mode. This implements the neccessary logic to - * perform the task on such devices. Calling it on other devices will - * have -undefined- behaviour. - */ - -int ata_pci_clear_simplex(struct pci_dev *pdev) -{ - unsigned long bmdma = pci_resource_start(pdev, 4); - u8 simplex; - - if (bmdma == 0) - return -ENOENT; - - simplex = inb(bmdma + 0x02); - outb(simplex & 0x60, bmdma + 0x02); - simplex = inb(bmdma + 0x02); - if (simplex & 0x80) - return -EOPNOTSUPP; - return 0; -} - -unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask) -{ - /* Filter out DMA modes if the device has been configured by - the BIOS as PIO only */ - - if (ap->ioaddr.bmdma_addr == 0) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - return xfer_mask; -} - -#endif /* CONFIG_PCI */ - |