diff options
Diffstat (limited to 'drivers/scsi/libata-core.c')
| -rw-r--r-- | drivers/scsi/libata-core.c | 6020 |
1 files changed, 0 insertions, 6020 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c deleted file mode 100644 index 427b73a3886..00000000000 --- a/drivers/scsi/libata-core.c +++ /dev/null @@ -1,6020 +0,0 @@ -/* - * libata-core.c - helper library for ATA - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/mm.h> -#include <linux/highmem.h> -#include <linux/spinlock.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/completion.h> -#include <linux/suspend.h> -#include <linux/workqueue.h> -#include <linux/jiffies.h> -#include <linux/scatterlist.h> -#include <scsi/scsi.h> -#include "scsi_priv.h" -#include <scsi/scsi_cmnd.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> -#include <asm/io.h> -#include <asm/semaphore.h> -#include <asm/byteorder.h> - -#include "libata.h" - -/* debounce timing parameters in msecs { interval, duration, timeout } */ -const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; -const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; -const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; - -static unsigned int ata_dev_init_params(struct ata_device *dev, - u16 heads, u16 sectors); -static unsigned int ata_dev_set_xfermode(struct ata_device *dev); -static void ata_dev_xfermask(struct ata_device *dev); - -static unsigned int ata_unique_id = 1; -static struct workqueue_struct *ata_wq; - -struct workqueue_struct *ata_aux_wq; - -int atapi_enabled = 1; -module_param(atapi_enabled, int, 0444); -MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); - -int atapi_dmadir = 0; -module_param(atapi_dmadir, int, 0444); -MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); - -int libata_fua = 0; -module_param_named(fua, libata_fua, int, 0444); -MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); - -static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; -module_param(ata_probe_timeout, int, 0444); -MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("Library module for ATA devices"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - - -/** - * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure - * @tf: Taskfile to convert - * @fis: Buffer into which data will output - * @pmp: Port multiplier port - * - * Converts a standard ATA taskfile to a Serial ATA - * FIS structure (Register - Host to Device). - * - * LOCKING: - * Inherited from caller. - */ - -void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) -{ - fis[0] = 0x27; /* Register - Host to Device FIS */ - fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, - bit 7 indicates Command FIS */ - fis[2] = tf->command; - fis[3] = tf->feature; - - fis[4] = tf->lbal; - fis[5] = tf->lbam; - fis[6] = tf->lbah; - fis[7] = tf->device; - - fis[8] = tf->hob_lbal; - fis[9] = tf->hob_lbam; - fis[10] = tf->hob_lbah; - fis[11] = tf->hob_feature; - - fis[12] = tf->nsect; - fis[13] = tf->hob_nsect; - fis[14] = 0; - fis[15] = tf->ctl; - - fis[16] = 0; - fis[17] = 0; - fis[18] = 0; - fis[19] = 0; -} - -/** - * ata_tf_from_fis - Convert SATA FIS to ATA taskfile - * @fis: Buffer from which data will be input - * @tf: Taskfile to output - * - * Converts a serial ATA FIS structure to a standard ATA taskfile. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) -{ - tf->command = fis[2]; /* status */ - tf->feature = fis[3]; /* error */ - - tf->lbal = fis[4]; - tf->lbam = fis[5]; - tf->lbah = fis[6]; - tf->device = fis[7]; - - tf->hob_lbal = fis[8]; - tf->hob_lbam = fis[9]; - tf->hob_lbah = fis[10]; - - tf->nsect = fis[12]; - tf->hob_nsect = fis[13]; -} - -static const u8 ata_rw_cmds[] = { - /* pio multi */ - ATA_CMD_READ_MULTI, - ATA_CMD_WRITE_MULTI, - ATA_CMD_READ_MULTI_EXT, - ATA_CMD_WRITE_MULTI_EXT, - 0, - 0, - 0, - ATA_CMD_WRITE_MULTI_FUA_EXT, - /* pio */ - ATA_CMD_PIO_READ, - ATA_CMD_PIO_WRITE, - ATA_CMD_PIO_READ_EXT, - ATA_CMD_PIO_WRITE_EXT, - 0, - 0, - 0, - 0, - /* dma */ - ATA_CMD_READ, - ATA_CMD_WRITE, - ATA_CMD_READ_EXT, - ATA_CMD_WRITE_EXT, - 0, - 0, - 0, - ATA_CMD_WRITE_FUA_EXT -}; - -/** - * ata_rwcmd_protocol - set taskfile r/w commands and protocol - * @qc: command to examine and configure - * - * Examine the device configuration and tf->flags to calculate - * the proper read/write commands and protocol to use. - * - * LOCKING: - * caller. - */ -int ata_rwcmd_protocol(struct ata_queued_cmd *qc) -{ - struct ata_taskfile *tf = &qc->tf; - struct ata_device *dev = qc->dev; - u8 cmd; - - int index, fua, lba48, write; - - fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; - lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; - write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; - - if (dev->flags & ATA_DFLAG_PIO) { - tf->protocol = ATA_PROT_PIO; - index = dev->multi_count ? 0 : 8; - } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) { - /* Unable to use DMA due to host limitation */ - tf->protocol = ATA_PROT_PIO; - index = dev->multi_count ? 0 : 8; - } else { - tf->protocol = ATA_PROT_DMA; - index = 16; - } - - cmd = ata_rw_cmds[index + fua + lba48 + write]; - if (cmd) { - tf->command = cmd; - return 0; - } - return -1; -} - -/** - * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask - * @pio_mask: pio_mask - * @mwdma_mask: mwdma_mask - * @udma_mask: udma_mask - * - * Pack @pio_mask, @mwdma_mask and @udma_mask into a single - * unsigned int xfer_mask. - * - * LOCKING: - * None. - * - * RETURNS: - * Packed xfer_mask. - */ -static unsigned int ata_pack_xfermask(unsigned int pio_mask, - unsigned int mwdma_mask, - unsigned int udma_mask) -{ - return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | - ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | - ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); -} - -/** - * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks - * @xfer_mask: xfer_mask to unpack - * @pio_mask: resulting pio_mask - * @mwdma_mask: resulting mwdma_mask - * @udma_mask: resulting udma_mask - * - * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. - * Any NULL distination masks will be ignored. - */ -static void ata_unpack_xfermask(unsigned int xfer_mask, - unsigned int *pio_mask, - unsigned int *mwdma_mask, - unsigned int *udma_mask) -{ - if (pio_mask) - *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; - if (mwdma_mask) - *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; - if (udma_mask) - *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; -} - -static const struct ata_xfer_ent { - int shift, bits; - u8 base; -} ata_xfer_tbl[] = { - { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, - { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, - { -1, }, -}; - -/** - * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask - * @xfer_mask: xfer_mask of interest - * - * Return matching XFER_* value for @xfer_mask. Only the highest - * bit of @xfer_mask is considered. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching XFER_* value, 0 if no match found. - */ -static u8 ata_xfer_mask2mode(unsigned int xfer_mask) -{ - int highbit = fls(xfer_mask) - 1; - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (highbit >= ent->shift && highbit < ent->shift + ent->bits) - return ent->base + highbit - ent->shift; - return 0; -} - -/** - * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* - * @xfer_mode: XFER_* of interest - * - * Return matching xfer_mask for @xfer_mode. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching xfer_mask, 0 if no match found. - */ -static unsigned int ata_xfer_mode2mask(u8 xfer_mode) -{ - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return 1 << (ent->shift + xfer_mode - ent->base); - return 0; -} - -/** - * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* - * @xfer_mode: XFER_* of interest - * - * Return matching xfer_shift for @xfer_mode. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching xfer_shift, -1 if no match found. - */ -static int ata_xfer_mode2shift(unsigned int xfer_mode) -{ - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return ent->shift; - return -1; -} - -/** - * ata_mode_string - convert xfer_mask to string - * @xfer_mask: mask of bits supported; only highest bit counts. - * - * Determine string which represents the highest speed - * (highest bit in @modemask). - * - * LOCKING: - * None. - * - * RETURNS: - * Constant C string representing highest speed listed in - * @mode_mask, or the constant C string "<n/a>". - */ -static const char *ata_mode_string(unsigned int xfer_mask) -{ - static const char * const xfer_mode_str[] = { - "PIO0", - "PIO1", - "PIO2", - "PIO3", - "PIO4", - "MWDMA0", - "MWDMA1", - "MWDMA2", - "UDMA/16", - "UDMA/25", - "UDMA/33", - "UDMA/44", - "UDMA/66", - "UDMA/100", - "UDMA/133", - "UDMA7", - }; - int highbit; - - highbit = fls(xfer_mask) - 1; - if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) - return xfer_mode_str[highbit]; - return "<n/a>"; -} - -static const char *sata_spd_string(unsigned int spd) -{ - static const char * const spd_str[] = { - "1.5 Gbps", - "3.0 Gbps", - }; - - if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) - return "<unknown>"; - return spd_str[spd - 1]; -} - -void ata_dev_disable(struct ata_device *dev) -{ - if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { - ata_dev_printk(dev, KERN_WARNING, "disabled\n"); - dev->class++; - } -} - -/** - * ata_pio_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. - * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_pio_devchk(struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - outb(0x55, ioaddr->nsect_addr); - outb(0xaa, ioaddr->lbal_addr); - - outb(0xaa, ioaddr->nsect_addr); - outb(0x55, ioaddr->lbal_addr); - - outb(0x55, ioaddr->nsect_addr); - outb(0xaa, ioaddr->lbal_addr); - - nsect = inb(ioaddr->nsect_addr); - lbal = inb(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * ata_mmio_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. - * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_mmio_devchk(struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - writeb(0x55, (void __iomem *) ioaddr->nsect_addr); - writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); - - writeb(0xaa, (void __iomem *) ioaddr->nsect_addr); - writeb(0x55, (void __iomem *) ioaddr->lbal_addr); - - writeb(0x55, (void __iomem *) ioaddr->nsect_addr); - writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); - - nsect = readb((void __iomem *) ioaddr->nsect_addr); - lbal = readb((void __iomem *) ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * ata_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * Dispatch ATA device presence detection, depending - * on whether we are using PIO or MMIO to talk to the - * ATA shadow registers. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_devchk(struct ata_port *ap, - unsigned int device) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_mmio_devchk(ap, device); - return ata_pio_devchk(ap, device); -} - -/** - * ata_dev_classify - determine device type based on ATA-spec signature - * @tf: ATA taskfile register set for device to be identified - * - * Determine from taskfile register contents whether a device is - * ATA or ATAPI, as per "Signature and persistence" section - * of ATA/PI spec (volume 1, sect 5.14). - * - * LOCKING: - * None. - * - * RETURNS: - * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN - * the event of failure. - */ - -unsigned int ata_dev_classify(const struct ata_taskfile *tf) -{ - /* Apple's open source Darwin code hints that some devices only - * put a proper signature into the LBA mid/high registers, - * So, we only check those. It's sufficient for uniqueness. - */ - - if (((tf->lbam == 0) && (tf->lbah == 0)) || - ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) { - DPRINTK("found ATA device by sig\n"); - return ATA_DEV_ATA; - } - - if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) || - ((tf->lbam == 0x69) && (tf->lbah == 0x96))) { - DPRINTK("found ATAPI device by sig\n"); - return ATA_DEV_ATAPI; - } - - DPRINTK("unknown device\n"); - return ATA_DEV_UNKNOWN; -} - -/** - * ata_dev_try_classify - Parse returned ATA device signature - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * @r_err: Value of error register on completion - * - * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, - * an ATA/ATAPI-defined set of values is placed in the ATA - * shadow registers, indicating the results of device detection - * and diagnostics. - * - * Select the ATA device, and read the values from the ATA shadow - * registers. Then parse according to the Error register value, - * and the spec-defined values examined by ata_dev_classify(). - * - * LOCKING: - * caller. - * - * RETURNS: - * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. - */ - -static unsigned int -ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) -{ - struct ata_taskfile tf; - unsigned int class; - u8 err; - - ap->ops->dev_select(ap, device); - - memset(&tf, 0, sizeof(tf)); - - ap->ops->tf_read(ap, &tf); - err = tf.feature; - if (r_err) - *r_err = err; - - /* see if device passed diags */ - if (err == 1) - /* do nothing */ ; - else if ((device == 0) && (err == 0x81)) - /* do nothing */ ; - else - return ATA_DEV_NONE; - - /* determine if device is ATA or ATAPI */ - class = ata_dev_classify(&tf); - - if (class == ATA_DEV_UNKNOWN) - return ATA_DEV_NONE; - if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - return ATA_DEV_NONE; - return class; -} - -/** - * ata_id_string - Convert IDENTIFY DEVICE page into string - * @id: IDENTIFY DEVICE results we will examine - * @s: string into which data is output - * @ofs: offset into identify device page - * @len: length of string to return. must be an even number. - * - * The strings in the IDENTIFY DEVICE page are broken up into - * 16-bit chunks. Run through the string, and output each - * 8-bit chunk linearly, regardless of platform. - * - * LOCKING: - * caller. - */ - -void ata_id_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) -{ - unsigned int c; - - while (len > 0) { - c = id[ofs] >> 8; - *s = c; - s++; - - c = id[ofs] & 0xff; - *s = c; - s++; - - ofs++; - len -= 2; - } -} - -/** - * ata_id_c_string - Convert IDENTIFY DEVICE page into C string - * @id: IDENTIFY DEVICE results we will examine - * @s: string into which data is output - * @ofs: offset into identify device page - * @len: length of string to return. must be an odd number. - * - * This function is identical to ata_id_string except that it - * trims trailing spaces and terminates the resulting string with - * null. @len must be actual maximum length (even number) + 1. - * - * LOCKING: - * caller. - */ -void ata_id_c_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) -{ - unsigned char *p; - - WARN_ON(!(len & 1)); - - ata_id_string(id, s, ofs, len - 1); - - p = s + strnlen(s, len - 1); - while (p > s && p[-1] == ' ') - p--; - *p = '\0'; -} - -static u64 ata_id_n_sectors(const u16 *id) -{ - if (ata_id_has_lba(id)) { - if (ata_id_has_lba48(id)) - return ata_id_u64(id, 100); - else - return ata_id_u32(id, 60); - } else { - if (ata_id_current_chs_valid(id)) - return ata_id_u32(id, 57); - else - return id[1] * id[3] * id[6]; - } -} - -/** - * ata_noop_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * This function performs no actual function. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ -void ata_noop_dev_select (struct ata_port *ap, unsigned int device) -{ -} - - -/** - * ata_std_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. Works with both PIO and MMIO. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ - -void ata_std_dev_select (struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - if (ap->flags & ATA_FLAG_MMIO) { - writeb(tmp, (void __iomem *) ap->ioaddr.device_addr); - } else { - outb(tmp, ap->ioaddr.device_addr); - } - ata_pause(ap); /* needed; also flushes, for mmio */ -} - -/** - * ata_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * @wait: non-zero to wait for Status register BSY bit to clear - * @can_sleep: non-zero if context allows sleeping - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. - * - * This is a high-level version of ata_std_dev_select(), - * which additionally provides the services of inserting - * the proper pauses and status polling, where needed. - * - * LOCKING: - * caller. - */ - -void ata_dev_select(struct ata_port *ap, unsigned int device, - unsigned int wait, unsigned int can_sleep) -{ - if (ata_msg_probe(ap)) - ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: " - "device %u, wait %u\n", ap->id, device, wait); - - if (wait) - ata_wait_idle(ap); - - ap->ops->dev_select(ap, device); - - if (wait) { - if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI) - msleep(150); - ata_wait_idle(ap); - } -} - -/** - * ata_dump_id - IDENTIFY DEVICE info debugging output - * @id: IDENTIFY DEVICE page to dump - * - * Dump selected 16-bit words from the given IDENTIFY DEVICE - * page. - * - * LOCKING: - * caller. - */ - -static inline void ata_dump_id(const u16 *id) -{ - DPRINTK("49==0x%04x " - "53==0x%04x " - "63==0x%04x " - "64==0x%04x " - "75==0x%04x \n", - id[49], - id[53], - id[63], - id[64], - id[75]); - DPRINTK("80==0x%04x " - "81==0x%04x " - "82==0x%04x " - "83==0x%04x " - "84==0x%04x \n", - id[80], - id[81], - id[82], - id[83], - id[84]); - DPRINTK("88==0x%04x " - "93==0x%04x\n", - id[88], - id[93]); -} - -/** - * ata_id_xfermask - Compute xfermask from the given IDENTIFY data - * @id: IDENTIFY data to compute xfer mask from - * - * Compute the xfermask for this device. This is not as trivial - * as it seems if we must consider early devices correctly. - * - * FIXME: pre IDE drive timing (do we care ?). - * - * LOCKING: - * None. - * - * RETURNS: - * Computed xfermask - */ -static unsigned int ata_id_xfermask(const u16 *id) -{ - unsigned int pio_mask, mwdma_mask, udma_mask; - - /* Usual case. Word 53 indicates word 64 is valid */ - if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { - pio_mask = id[ATA_ID_PIO_MODES] & 0x03; - pio_mask <<= 3; - pio_mask |= 0x7; - } else { - /* If word 64 isn't valid then Word 51 high byte holds - * the PIO timing number for the maximum. Turn it into - * a mask. - */ - pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; - - /* But wait.. there's more. Design your standards by - * committee and you too can get a free iordy field to - * process. However its the speeds not the modes that - * are supported... Note drivers using the timing API - * will get this right anyway - */ - } - - mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; - - udma_mask = 0; - if (id[ATA_ID_FIELD_VALID] & (1 << 2)) - udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; - - return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); -} - -/** - * ata_port_queue_task - Queue port_task - * @ap: The ata_port to queue port_task for - * @fn: workqueue function to be scheduled - * @data: data value to pass to workqueue function - * @delay: delay time for workqueue function - * - * Schedule @fn(@data) for execution after @delay jiffies using - * port_task. There is one port_task per port and it's the - * user(low level driver)'s responsibility to make sure that only - * one task is active at any given time. - * - * libata core layer takes care of synchronization between - * port_task and EH. ata_port_queue_task() may be ignored for EH - * synchronization. - * - * LOCKING: - * Inherited from caller. - */ -void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, - unsigned long delay) -{ - int rc; - - if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK) - return; - - PREPARE_WORK(&ap->port_task, fn, data); - - if (!delay) - rc = queue_work(ata_wq, &ap->port_task); - else - rc = queue_delayed_work(ata_wq, &ap->port_task, delay); - - /* rc == 0 means that another user is using port task */ - WARN_ON(rc == 0); -} - -/** - * ata_port_flush_task - Flush port_task - * @ap: The ata_port to flush port_task for - * - * After this function completes, port_task is guranteed not to - * be running or scheduled. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_port_flush_task(struct ata_port *ap) -{ - unsigned long flags; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(ap->lock, flags); - - DPRINTK("flush #1\n"); - flush_workqueue(ata_wq); - - /* - * At this point, if a task is running, it's guaranteed to see - * the FLUSH flag; thus, it will never queue pio tasks again. - * Cancel and flush. - */ - if (!cancel_delayed_work(&ap->port_task)) { - if (ata_msg_ctl(ap)) - ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", - __FUNCTION__); - flush_workqueue(ata_wq); - } - - spin_lock_irqsave(ap->lock, flags); - ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(ap->lock, flags); - - if (ata_msg_ctl(ap)) - ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); -} - -void ata_qc_complete_internal(struct ata_queued_cmd *qc) -{ - struct completion *waiting = qc->private_data; - - complete(waiting); -} - -/** - * ata_exec_internal - execute libata internal command - * @dev: Device to which the command is sent - * @tf: Taskfile registers for the command and the result - * @cdb: CDB for packet command - * @dma_dir: Data tranfer direction of the command - * @buf: Data buffer of the command - * @buflen: Length of data buffer - * - * Executes libata internal command with timeout. @tf contains - * command on entry and result on return. Timeout and error - * conditions are reported via return value. No recovery action - * is taken after a command times out. It's caller's duty to - * clean up after timeout. - * - * LOCKING: - * None. Should be called with kernel context, might sleep. - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ -unsigned ata_exec_internal(struct ata_device *dev, - struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen) -{ - struct ata_port *ap = dev->ap; - u8 command = tf->command; - struct ata_queued_cmd *qc; - unsigned int tag, preempted_tag; - u32 preempted_sactive, preempted_qc_active; - DECLARE_COMPLETION_ONSTACK(wait); - unsigned long flags; - unsigned int err_mask; - int rc; - - spin_lock_irqsave(ap->lock, flags); - - /* no internal command while frozen */ - if (ap->pflags & ATA_PFLAG_FROZEN) { - spin_unlock_irqrestore(ap->lock, flags); - return AC_ERR_SYSTEM; - } - - /* initialize internal qc */ - - /* XXX: Tag 0 is used for drivers with legacy EH as some - * drivers choke if any other tag is given. This breaks - * ata_tag_internal() test for those drivers. Don't use new - * EH stuff without converting to it. - */ - if (ap->ops->error_handler) - tag = ATA_TAG_INTERNAL; - else - tag = 0; - - if (test_and_set_bit(tag, &ap->qc_allocated)) - BUG(); - qc = __ata_qc_from_tag(ap, tag); - - qc->tag = tag; - qc->scsicmd = NULL; - qc->ap = ap; - qc->dev = dev; - ata_qc_reinit(qc); - - preempted_tag = ap->active_tag; - preempted_sactive = ap->sactive; - preempted_qc_active = ap->qc_active; - ap->active_tag = ATA_TAG_POISON; - ap->sactive = 0; - ap->qc_active = 0; - - /* prepare & issue qc */ - qc->tf = *tf; - if (cdb) - memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); - qc->flags |= ATA_QCFLAG_RESULT_TF; - qc->dma_dir = dma_dir; - if (dma_dir != DMA_NONE) { - ata_sg_init_one(qc, buf, buflen); - qc->nsect = buflen / ATA_SECT_SIZE; - } - - qc->private_data = &wait; - qc->complete_fn = ata_qc_complete_internal; - - ata_qc_issue(qc); - - spin_unlock_irqrestore(ap->lock, flags); - - rc = wait_for_completion_timeout(&wait, ata_probe_timeout); - - ata_port_flush_task(ap); - - if (!rc) { - spin_lock_irqsave(ap->lock, flags); - - /* We're racing with irq here. If we lose, the - * following test prevents us from completing the qc - * twice. If we win, the port is frozen and will be - * cleaned up by ->post_internal_cmd(). - */ - if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask |= AC_ERR_TIMEOUT; - - if (ap->ops->error_handler) - ata_port_freeze(ap); - else - ata_qc_complete(qc); - - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "qc timeout (cmd 0x%x)\n", command); - } - - spin_unlock_irqrestore(ap->lock, flags); - } - - /* do post_internal_cmd */ - if (ap->ops->post_internal_cmd) - ap->ops->post_internal_cmd(qc); - - if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) { - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "zero err_mask for failed " - "internal command, assuming AC_ERR_OTHER\n"); - qc->err_mask |= AC_ERR_OTHER; - } - - /* finish up */ - spin_lock_irqsave(ap->lock, flags); - - *tf = qc->result_tf; - err_mask = qc->err_mask; - - ata_qc_free(qc); - ap->active_tag = preempted_tag; - ap->sactive = preempted_sactive; - ap->qc_active = preempted_qc_active; - - /* XXX - Some LLDDs (sata_mv) disable port on command failure. - * Until those drivers are fixed, we detect the condition - * here, fail the command with AC_ERR_SYSTEM and reenable the - * port. - * - * Note that this doesn't change any behavior as internal - * command failure results in disabling the device in the - * higher layer for LLDDs without new reset/EH callbacks. - * - * Kill the following code as soon as those drivers are fixed. - */ - if (ap->flags & ATA_FLAG_DISABLED) { - err_mask |= AC_ERR_SYSTEM; - ata_port_probe(ap); - } - - spin_unlock_irqrestore(ap->lock, flags); - - return err_mask; -} - -/** - * ata_do_simple_cmd - execute simple internal command - * @dev: Device to which the command is sent - * @cmd: Opcode to execute - * - * Execute a 'simple' command, that only consists of the opcode - * 'cmd' itself, without filling any other registers - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ -unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) -{ - struct ata_taskfile tf; - - ata_tf_init(dev, &tf); - - tf.command = cmd; - tf.flags |= ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - - return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); -} - -/** - * ata_pio_need_iordy - check if iordy needed - * @adev: ATA device - * - * Check if the current speed of the device requires IORDY. Used - * by various controllers for chip configuration. - */ - -unsigned int ata_pio_need_iordy(const struct ata_device *adev) -{ - int pio; - int speed = adev->pio_mode - XFER_PIO_0; - - if (speed < 2) - return 0; - if (speed > 2) - return 1; - - /* If we have no drive specific rule, then PIO 2 is non IORDY */ - - if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ - pio = adev->id[ATA_ID_EIDE_PIO]; - /* Is the speed faster than the drive allows non IORDY ? */ - if (pio) { - /* This is cycle times not frequency - watch the logic! */ - if (pio > 240) /* PIO2 is 240nS per cycle */ - return 1; - return 0; - } - } - return 0; -} - -/** - * ata_dev_read_id - Read ID data from the specified device - * @dev: target device - * @p_class: pointer to class of the target device (may be changed) - * @post_reset: is this read ID post-reset? - * @id: buffer to read IDENTIFY data into - * - * Read ID data from the specified device. ATA_CMD_ID_ATA is - * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI - * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS - * for pre-ATA4 drives. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, - int post_reset, u16 *id) -{ - struct ata_port *ap = dev->ap; - unsigned int class = *p_class; - struct ata_taskfile tf; - unsigned int err_mask = 0; - const char *reason; - int rc; - - if (ata_msg_ctl(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", - __FUNCTION__, ap->id, dev->devno); - - ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ - - retry: - ata_tf_init(dev, &tf); - - switch (class) { - case ATA_DEV_ATA: - tf.command = ATA_CMD_ID_ATA; - break; - case ATA_DEV_ATAPI: - tf.command = ATA_CMD_ID_ATAPI; - break; - default: - rc = -ENODEV; - reason = "unsupported class"; - goto err_out; - } - - tf.protocol = ATA_PROT_PIO; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - id, sizeof(id[0]) * ATA_ID_WORDS); - if (err_mask) { - rc = -EIO; - reason = "I/O error"; - goto err_out; - } - - swap_buf_le16(id, ATA_ID_WORDS); - - /* sanity check */ - rc = -EINVAL; - reason = "device reports illegal type"; - - if (class == ATA_DEV_ATA) { - if (!ata_id_is_ata(id) && !ata_id_is_cfa(id)) - goto err_out; - } else { - if (ata_id_is_ata(id)) - goto err_out; - } - - if (post_reset && class == ATA_DEV_ATA) { - /* - * The exact sequence expected by certain pre-ATA4 drives is: - * SRST RESET - * IDENTIFY - * INITIALIZE DEVICE PARAMETERS - * anything else.. - * Some drives were very specific about that exact sequence. - */ - if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { - err_mask = ata_dev_init_params(dev, id[3], id[6]); - if (err_mask) { - rc = -EIO; - reason = "INIT_DEV_PARAMS failed"; - goto err_out; - } - - /* current CHS translation info (id[53-58]) might be - * changed. reread the identify device info. - */ - post_reset = 0; - goto retry; - } - } - - *p_class = class; - - return 0; - - err_out: - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " - "(%s, err_mask=0x%x)\n", reason, err_mask); - return rc; -} - -static inline u8 ata_dev_knobble(struct ata_device *dev) -{ - return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); -} - -static void ata_dev_config_ncq(struct ata_device *dev, - char *desc, size_t desc_sz) -{ - struct ata_port *ap = dev->ap; - int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); - - if (!ata_id_has_ncq(dev->id)) { - desc[0] = '\0'; - return; - } - - if (ap->flags & ATA_FLAG_NCQ) { - hdepth = min(ap->host->can_queue, ATA_MAX_QUEUE - 1); - dev->flags |= ATA_DFLAG_NCQ; - } - - if (hdepth >= ddepth) - snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); - else - snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); -} - -static void ata_set_port_max_cmd_len(struct ata_port *ap) -{ - int i; - - if (ap->host) { - ap->host->max_cmd_len = 0; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->host->max_cmd_len = max_t(unsigned int, - ap->host->max_cmd_len, - ap->device[i].cdb_len); - } -} - -/** - * ata_dev_configure - Configure the specified ATA/ATAPI device - * @dev: Target device to configure - * @print_info: Enable device info printout - * - * Configure @dev according to @dev->id. Generic and low-level - * driver specific fixups are also applied. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise - */ -int ata_dev_configure(struct ata_device *dev, int print_info) -{ - struct ata_port *ap = dev->ap; - const u16 *id = dev->id; - unsigned int xfer_mask; - int rc; - - if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { - ata_dev_printk(dev, KERN_INFO, - "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n", - __FUNCTION__, ap->id, dev->devno); - return 0; - } - - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", - __FUNCTION__, ap->id, dev->devno); - - /* print device capabilities */ - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, - "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " - "85:%04x 86:%04x 87:%04x 88:%04x\n", - __FUNCTION__, - id[49], id[82], id[83], id[84], - id[85], id[86], id[87], id[88]); - - /* initialize to-be-configured parameters */ - dev->flags &= ~ATA_DFLAG_CFG_MASK; - dev->max_sectors = 0; - dev->cdb_len = 0; - dev->n_sectors = 0; - dev->cylinders = 0; - dev->heads = 0; - dev->sectors = 0; - - /* - * common ATA, ATAPI feature tests - */ - - /* find max transfer mode; for printk only */ - xfer_mask = ata_id_xfermask(id); - - if (ata_msg_probe(ap)) - ata_dump_id(id); - - /* ATA-specific feature tests */ - if (dev->class == ATA_DEV_ATA) { - dev->n_sectors = ata_id_n_sectors(id); - - if (ata_id_has_lba(id)) { - const char *lba_desc; - char ncq_desc[20]; - - lba_desc = "LBA"; - dev->flags |= ATA_DFLAG_LBA; - if (ata_id_has_lba48(id)) { - dev->flags |= ATA_DFLAG_LBA48; - lba_desc = "LBA48"; - } - - /* config NCQ */ - ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); - - /* print device info to dmesg */ - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " - "max %s, %Lu sectors: %s %s\n", - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - lba_desc, ncq_desc); - } else { - /* CHS */ - - /* Default translation */ - dev->cylinders = id[1]; - dev->heads = id[3]; - dev->sectors = id[6]; - - if (ata_id_current_chs_valid(id)) { - /* Current CHS translation is valid. */ - dev->cylinders = id[54]; - dev->heads = id[55]; - dev->sectors = id[56]; - } - - /* print device info to dmesg */ - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " - "max %s, %Lu sectors: CHS %u/%u/%u\n", - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - dev->cylinders, dev->heads, - dev->sectors); - } - - if (dev->id[59] & 0x100) { - dev->multi_count = dev->id[59] & 0xff; - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, - "ata%u: dev %u multi count %u\n", - ap->id, dev->devno, dev->multi_count); - } - - dev->cdb_len = 16; - } - - /* ATAPI-specific feature tests */ - else if (dev->class == ATA_DEV_ATAPI) { - char *cdb_intr_string = ""; - - rc = atapi_cdb_len(id); - if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "unsupported CDB len\n"); - rc = -EINVAL; - goto err_out_nosup; - } - dev->cdb_len = (unsigned int) rc; - - if (ata_id_cdb_intr(dev->id)) { - dev->flags |= ATA_DFLAG_CDB_INTR; - cdb_intr_string = ", CDB intr"; - } - - /* print device info to dmesg */ - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", - ata_mode_string(xfer_mask), - cdb_intr_string); - } - - ata_set_port_max_cmd_len(ap); - - /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(dev)) { - if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, - "applying bridge limits\n"); - dev->udma_mask &= ATA_UDMA5; - dev->max_sectors = ATA_MAX_SECTORS; - } - - if (ap->ops->dev_config) - ap->ops->dev_config(ap, dev); - - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", - __FUNCTION__, ata_chk_status(ap)); - return 0; - -err_out_nosup: - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, - "%s: EXIT, err\n", __FUNCTION__); - return rc; -} - -/** - * ata_bus_probe - Reset and probe ATA bus - * @ap: Bus to probe - * - * Master ATA bus probing function. Initiates a hardware-dependent - * bus reset, then attempts to identify any devices found on - * the bus. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Zero on success, negative errno otherwise. - */ - -static int ata_bus_probe(struct ata_port *ap) -{ - unsigned int classes[ATA_MAX_DEVICES]; - int tries[ATA_MAX_DEVICES]; - int i, rc, down_xfermask; - struct ata_device *dev; - - ata_port_probe(ap); - - for (i = 0; i < ATA_MAX_DEVICES; i++) - tries[i] = ATA_PROBE_MAX_TRIES; - - retry: - down_xfermask = 0; - - /* reset and determine device classes */ - ap->ops->phy_reset(ap); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (!(ap->flags & ATA_FLAG_DISABLED) && - dev->class != ATA_DEV_UNKNOWN) - classes[dev->devno] = dev->class; - else - classes[dev->devno] = ATA_DEV_NONE; - - dev->class = ATA_DEV_UNKNOWN; - } - - ata_port_probe(ap); - - /* after the reset the device state is PIO 0 and the controller - state is undefined. Record the mode */ - - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].pio_mode = XFER_PIO_0; - - /* read IDENTIFY page and configure devices */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (tries[i]) - dev->class = classes[i]; - - if (!ata_dev_enabled(dev)) - continue; - - rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); - if (rc) - goto fail; - - rc = ata_dev_configure(dev, 1); - if (rc) - goto fail; - } - - /* configure transfer mode */ - rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; - goto fail; - } - - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_enabled(&ap->device[i])) - return 0; - - /* no device present, disable port */ - ata_port_disable(ap); - ap->ops->port_disable(ap); - return -ENODEV; - - fail: - switch (rc) { - case -EINVAL: - case -ENODEV: - tries[dev->devno] = 0; - break; - case -EIO: - sata_down_spd_limit(ap); - /* fall through */ - default: - tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) - tries[dev->devno] = 0; - } - - if (!tries[dev->devno]) { - ata_down_xfermask_limit(dev, 1); - ata_dev_disable(dev); - } - - goto retry; -} - -/** - * ata_port_probe - Mark port as enabled - * @ap: Port for which we indicate enablement - * - * Modify @ap data structure such that the system - * thinks that the entire port is enabled. - * - * LOCKING: host_set lock, or some other form of - * serialization. - */ - -void ata_port_probe(struct ata_port *ap) -{ - ap->flags &= ~ATA_FLAG_DISABLED; -} - -/** - * sata_print_link_status - Print SATA link status - * @ap: SATA port to printk link status about - * - * This function prints link speed and status of a SATA link. - * - * LOCKING: - * None. - */ -static void sata_print_link_status(struct ata_port *ap) -{ - u32 sstatus, scontrol, tmp; - - if (sata_scr_read(ap, SCR_STATUS, &sstatus)) - return; - sata_scr_read(ap, SCR_CONTROL, &scontrol); - - if (ata_port_online(ap)) { - tmp = (sstatus >> 4) & 0xf; - ata_port_printk(ap, KERN_INFO, - "SATA link up %s (SStatus %X SControl %X)\n", - sata_spd_string(tmp), sstatus, scontrol); - } else { - ata_port_printk(ap, KERN_INFO, - "SATA link down (SStatus %X SControl %X)\n", - sstatus, scontrol); - } -} - -/** - * __sata_phy_reset - Wake/reset a low-level SATA PHY - * @ap: SATA port associated with target SATA PHY. - * - * This function issues commands to standard SATA Sxxx - * PHY registers, to wake up the phy (and device), and - * clear any reset condition. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void __sata_phy_reset(struct ata_port *ap) -{ - u32 sstatus; - unsigned long timeout = jiffies + (HZ * 5); - - if (ap->flags & ATA_FLAG_SATA_RESET) { - /* issue phy wake/reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); - /* Couldn't find anything in SATA I/II specs, but - * AHCI-1.1 10.4.2 says at least 1 ms. */ - mdelay(1); - } - /* phy wake/clear reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); - - /* wait for phy to become ready, if necessary */ - do { - msleep(200); - sata_scr_read(ap, SCR_STATUS, &sstatus); - if ((sstatus & 0xf) != 1) - break; - } while (time_before(jiffies, timeout)); - - /* print link status */ - sata_print_link_status(ap); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (!ata_port_offline(ap)) - ata_port_probe(ap); - else - ata_port_disable(ap); - - if (ap->flags & ATA_FLAG_DISABLED) - return; - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_disable(ap); - return; - } - - ap->cbl = ATA_CBL_SATA; -} - -/** - * sata_phy_reset - Reset SATA bus. - * @ap: SATA port associated with target SATA PHY. - * - * This function resets the SATA bus, and then probes - * the bus for devices. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void sata_phy_reset(struct ata_port *ap) -{ - __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_DISABLED) - return; - ata_bus_reset(ap); -} - -/** - * ata_dev_pair - return other device on cable - * @adev: device - * - * Obtain the other device on the same cable, or if none is - * present NULL is returned - */ - -struct ata_device *ata_dev_pair(struct ata_device *adev) -{ - struct ata_port *ap = adev->ap; - struct ata_device *pair = &ap->device[1 - adev->devno]; - if (!ata_dev_enabled(pair)) - return NULL; - return pair; -} - -/** - * ata_port_disable - Disable port. - * @ap: Port to be disabled. - * - * Modify @ap data structure such that the system - * thinks that the entire port is disabled, and should - * never attempt to probe or communicate with devices - * on this port. - * - * LOCKING: host_set lock, or some other form of - * serialization. - */ - -void ata_port_disable(struct ata_port *ap) -{ - ap->device[0].class = ATA_DEV_NONE; - ap->device[1].class = ATA_DEV_NONE; - ap->flags |= ATA_FLAG_DISABLED; -} - -/** - * sata_down_spd_limit - adjust SATA spd limit downward - * @ap: Port to adjust SATA spd limit for - * - * Adjust SATA spd limit of @ap downward. Note that this - * function only adjusts the limit. The change must be applied - * using sata_set_spd(). - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 on success, negative errno on failure - */ -int sata_down_spd_limit(struct ata_port *ap) -{ - u32 sstatus, spd, mask; - int rc, highbit; - - rc = sata_scr_read(ap, SCR_STATUS, &sstatus); - if (rc) - return rc; - - mask = ap->sata_spd_limit; - if (mask <= 1) - return -EINVAL; - highbit = fls(mask) - 1; - mask &= ~(1 << highbit); - - spd = (sstatus >> 4) & 0xf; - if (spd <= 1) - return -EINVAL; - spd--; - mask &= (1 << spd) - 1; - if (!mask) - return -EINVAL; - - ap->sata_spd_limit = mask; - - ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", - sata_spd_string(fls(mask))); - - return 0; -} - -static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) -{ - u32 spd, limit; - - if (ap->sata_spd_limit == UINT_MAX) - limit = 0; - else - limit = fls(ap->sata_spd_limit); - - spd = (*scontrol >> 4) & 0xf; - *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); - - return spd != limit; -} - -/** - * sata_set_spd_needed - is SATA spd configuration needed - * @ap: Port in question - * - * Test whether the spd limit in SControl matches - * @ap->sata_spd_limit. This function is used to determine - * whether hardreset is necessary to apply SATA spd - * configuration. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 1 if SATA spd configuration is needed, 0 otherwise. - */ -int sata_set_spd_needed(struct ata_port *ap) -{ - u32 scontrol; - - if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) - return 0; - - return __sata_set_spd_needed(ap, &scontrol); -} - -/** - * sata_set_spd - set SATA spd according to spd limit - * @ap: Port to set SATA spd for - * - * Set SATA spd of @ap according to sata_spd_limit. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 if spd doesn't need to be changed, 1 if spd has been - * changed. Negative errno if SCR registers are inaccessible. - */ -int sata_set_spd(struct ata_port *ap) -{ - u32 scontrol; - int rc; - - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - if (!__sata_set_spd_needed(ap, &scontrol)) - return 0; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - return 1; -} - -/* - * This mode timing computation functionality is ported over from - * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik - */ -/* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). - * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. - */ - -static const struct ata_timing ata_timing[] = { - - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, - - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - -/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - -/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - -/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ - - { 0xFF } -}; - -#define ENOUGH(v,unit) (((v)-1)/(unit)+1) -#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) - -static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) -{ - q->setup = EZ(t->setup * 1000, T); - q->act8b = EZ(t->act8b * 1000, T); - q->rec8b = EZ(t->rec8b * 1000, T); - q->cyc8b = EZ(t->cyc8b * 1000, T); - q->active = EZ(t->active * 1000, T); - q->recover = EZ(t->recover * 1000, T); - q->cycle = EZ(t->cycle * 1000, T); - q->udma = EZ(t->udma * 1000, UT); -} - -void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, - struct ata_timing *m, unsigned int what) -{ - if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); - if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); - if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); - if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); - if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); - if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); - if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); -} - -static const struct ata_timing* ata_timing_find_mode(unsigned short speed) -{ - const struct ata_timing *t; - - for (t = ata_timing; t->mode != speed; t++) - if (t->mode == 0xFF) - return NULL; - return t; -} - -int ata_timing_compute(struct ata_device *adev, unsigned short speed, - struct ata_timing *t, int T, int UT) -{ - const struct ata_timing *s; - struct ata_timing p; - - /* - * Find the mode. - */ - - if (!(s = ata_timing_find_mode(speed))) - return -EINVAL; - - memcpy(t, s, sizeof(*s)); - - /* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MW_DMA cycle timing. - */ - - if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ - memset(&p, 0, sizeof(p)); - if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { - if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; - else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; - } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { - p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; - } - ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); - } - - /* - * Convert the timing to bus clock counts. - */ - - ata_timing_quantize(t, t, T, UT); - - /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, - * S.M.A.R.T * and some other commands. We have to ensure that the - * DMA cycle timing is slower/equal than the fastest PIO timing. - */ - - if (speed > XFER_PIO_4) { - ata_timing_compute(adev, adev->pio_mode, &p, T, UT); - ata_timing_merge(&p, t, t, ATA_TIMING_ALL); - } - - /* - * Lengthen active & recovery time so that cycle time is correct. - */ - - if (t->act8b + t->rec8b < t->cyc8b) { - t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; - t->rec8b = t->cyc8b - t->act8b; - } - - if (t->active + t->recover < t->cycle) { - t->active += (t->cycle - (t->active + t->recover)) / 2; - t->recover = t->cycle - t->active; - } - - return 0; -} - -/** - * ata_down_xfermask_limit - adjust dev xfer masks downward - * @dev: Device to adjust xfer masks - * @force_pio0: Force PIO0 - * - * Adjust xfer masks of @dev downward. Note that this function - * does not apply the change. Invoking ata_set_mode() afterwards - * will apply the limit. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 on success, negative errno on failure - */ -int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) -{ - unsigned long xfer_mask; - int highbit; - - xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, - dev->udma_mask); - - if (!xfer_mask) - goto fail; - /* don't gear down to MWDMA from UDMA, go directly to PIO */ - if (xfer_mask & ATA_MASK_UDMA) - xfer_mask &= ~ATA_MASK_MWDMA; - - highbit = fls(xfer_mask) - 1; - xfer_mask &= ~(1 << highbit); - if (force_pio0) - xfer_mask &= 1 << ATA_SHIFT_PIO; - if (!xfer_mask) - goto fail; - - ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, - &dev->udma_mask); - - ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", - ata_mode_string(xfer_mask)); - - return 0; - - fail: - return -EINVAL; -} - -static int ata_dev_set_mode(struct ata_device *dev) -{ - unsigned int err_mask; - int rc; - - dev->flags &= ~ATA_DFLAG_PIO; - if (dev->xfer_shift == ATA_SHIFT_PIO) - dev->flags |= ATA_DFLAG_PIO; - - err_mask = ata_dev_set_xfermode(dev); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " - "(err_mask=0x%x)\n", err_mask); - return -EIO; - } - - rc = ata_dev_revalidate(dev, 0); - if (rc) - return rc; - - DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", - dev->xfer_shift, (int)dev->xfer_mode); - - ata_dev_printk(dev, KERN_INFO, "configured for %s\n", - ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); - return 0; -} - -/** - * ata_set_mode - Program timings and issue SET FEATURES - XFER - * @ap: port on which timings will be programmed - * @r_failed_dev: out paramter for failed device - * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If - * ata_set_mode() fails, pointer to the failing device is - * returned in @r_failed_dev. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0, used_dma = 0, found = 0; - - /* has private set_mode? */ - if (ap->ops->set_mode) { - /* FIXME: make ->set_mode handle no device case and - * return error code and failing device on failure. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (ata_dev_ready(&ap->device[i])) { - ap->ops->set_mode(ap); - break; - } - } - return 0; - } - - /* step 1: calculate xfer_mask */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int pio_mask, dma_mask; - - dev = &ap->device[i]; - - if (!ata_dev_enabled(dev)) - continue; - - ata_dev_xfermask(dev); - - pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); - dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); - dev->pio_mode = ata_xfer_mask2mode(pio_mask); - dev->dma_mode = ata_xfer_mask2mode(dma_mask); - - found = 1; - if (dev->dma_mode) - used_dma = 1; - } - if (!found) - goto out; - - /* step 2: always set host PIO timings */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - if (!ata_dev_enabled(dev)) - continue; - - if (!dev->pio_mode) { - ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); - rc = -EINVAL; - goto out; - } - - dev->xfer_mode = dev->pio_mode; - dev->xfer_shift = ATA_SHIFT_PIO; - if (ap->ops->set_piomode) - ap->ops->set_piomode(ap, dev); - } - - /* step 3: set host DMA timings */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (!ata_dev_enabled(dev) || !dev->dma_mode) - continue; - - dev->xfer_mode = dev->dma_mode; - dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); - if (ap->ops->set_dmamode) - ap->ops->set_dmamode(ap, dev); - } - - /* step 4: update devices' xfer mode */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - /* don't udpate suspended devices' xfer mode */ - if (!ata_dev_ready(dev)) - continue; - - rc = ata_dev_set_mode(dev); - if (rc) - goto out; - } - - /* Record simplex status. If we selected DMA then the other - * host channels are not permitted to do so. - */ - if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) - ap->host_set->simplex_claimed = 1; - - /* step5: chip specific finalisation */ - if (ap->ops->post_set_mode) - ap->ops->post_set_mode(ap); - - out: - if (rc) - *r_failed_dev = dev; - return rc; -} - -/** - * ata_tf_to_host - issue ATA taskfile to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA taskfile register set to ATA host controller, - * with proper synchronization with interrupt handler and - * other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static inline void ata_tf_to_host(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ap->ops->tf_load(ap, tf); - ap->ops->exec_command(ap, tf); -} - -/** - * ata_busy_sleep - sleep until BSY clears, or timeout - * @ap: port containing status register to be polled - * @tmout_pat: impatience timeout - * @tmout: overall timeout - * - * Sleep until ATA Status register bit BSY clears, - * or a timeout occurs. - * - * LOCKING: None. - */ - -unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, unsigned long tmout) -{ - unsigned long timer_start, timeout; - u8 status; - - status = ata_busy_wait(ap, ATA_BUSY, 300); - timer_start = jiffies; - timeout = timer_start + tmout_pat; - while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { - msleep(50); - status = ata_busy_wait(ap, ATA_BUSY, 3); - } - - if (status & ATA_BUSY) - ata_port_printk(ap, KERN_WARNING, - "port is slow to respond, please be patient\n"); - - timeout = timer_start + tmout; - while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { - msleep(50); - status = ata_chk_status(ap); - } - - if (status & ATA_BUSY) { - ata_port_printk(ap, KERN_ERR, "port failed to respond " - "(%lu secs)\n", tmout / HZ); - return 1; - } - - return 0; -} - -static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - unsigned long timeout; - - /* if device 0 was found in ata_devchk, wait for its - * BSY bit to clear - */ - if (dev0) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - /* if device 1 was found in ata_devchk, wait for - * register access, then wait for BSY to clear - */ - timeout = jiffies + ATA_TMOUT_BOOT; - while (dev1) { - u8 nsect, lbal; - - ap->ops->dev_select(ap, 1); - if (ap->flags & ATA_FLAG_MMIO) { - nsect = readb((void __iomem *) ioaddr->nsect_addr); - lbal = readb((void __iomem *) ioaddr->lbal_addr); - } else { - nsect = inb(ioaddr->nsect_addr); - lbal = inb(ioaddr->lbal_addr); - } - if ((nsect == 1) && (lbal == 1)) - break; - if (time_after(jiffies, timeout)) { - dev1 = 0; - break; - } - msleep(50); /* give drive a breather */ - } - if (dev1) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - /* is all this really necessary? */ - ap->ops->dev_select(ap, 0); - if (dev1) - ap->ops->dev_select(ap, 1); - if (dev0) - ap->ops->dev_select(ap, 0); -} - -static unsigned int ata_bus_softreset(struct ata_port *ap, - unsigned int devmask) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->id); - - /* software reset. causes dev0 to be selected */ - if (ap->flags & ATA_FLAG_MMIO) { - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - } else { - outb(ap->ctl, ioaddr->ctl_addr); - udelay(10); - outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr); - udelay(10); - outb(ap->ctl, ioaddr->ctl_addr); - } - - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready - */ - msleep(150); - - /* Before we perform post reset processing we want to see if - * the bus shows 0xFF because the odd clown forgets the D7 - * pulldown resistor. - */ - if (ata_check_status(ap) == 0xFF) { - ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); - return AC_ERR_OTHER; - } - - ata_bus_post_reset(ap, devmask); - - return 0; -} - -/** - * ata_bus_reset - reset host port and associated ATA channel - * @ap: port to reset - * - * This is typically the first time we actually start issuing - * commands to the ATA channel. We wait for BSY to clear, then - * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its - * result. Determine what devices, if any, are on the channel - * by looking at the device 0/1 error register. Look at the signature - * stored in each device's taskfile registers, to determine if - * the device is ATA or ATAPI. - * - * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host_set lock. - * - * SIDE EFFECTS: - * Sets ATA_FLAG_DISABLED if bus reset fails. - */ - -void ata_bus_reset(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - u8 err; - unsigned int dev0, dev1 = 0, devmask = 0; - - DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no); - - /* determine if device 0/1 are present */ - if (ap->flags & ATA_FLAG_SATA_RESET) - dev0 = 1; - else { - dev0 = ata_devchk(ap, 0); - if (slave_possible) - dev1 = ata_devchk(ap, 1); - } - - if (dev0) - devmask |= (1 << 0); - if (dev1) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) - if (ata_bus_softreset(ap, devmask)) - goto err_out; - - /* - * determine by signature whether we have ATA or ATAPI devices - */ - ap->device[0].class = ata_dev_try_classify(ap, 0, &err); - if ((slave_possible) && (err != 0x81)) - ap->device[1].class = ata_dev_try_classify(ap, 1, &err); - - /* re-enable interrupts */ - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); - - /* is double-select really necessary? */ - if (ap->device[1].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (ap->device[0].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* if no devices were detected, disable this port */ - if ((ap->device[0].class == ATA_DEV_NONE) && - (ap->device[1].class == ATA_DEV_NONE)) - goto err_out; - - if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { - /* set up device control for ATA_FLAG_SATA_RESET */ - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); - } - - DPRINTK("EXIT\n"); - return; - -err_out: - ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ap->ops->port_disable(ap); - - DPRINTK("EXIT\n"); -} - -/** - * sata_phy_debounce - debounce SATA phy status - * @ap: ATA port to debounce SATA phy status for - * @params: timing parameters { interval, duratinon, timeout } in msec - * - * Make sure SStatus of @ap reaches stable state, determined by - * holding the same value where DET is not 1 for @duration polled - * every @interval, before @timeout. Timeout constraints the - * beginning of the stable state. Because, after hot unplugging, - * DET gets stuck at 1 on some controllers, this functions waits - * until timeout then returns 0 if DET is stable at 1. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) -{ - unsigned long interval_msec = params[0]; - unsigned long duration = params[1] * HZ / 1000; - unsigned long timeout = jiffies + params[2] * HZ / 1000; - unsigned long last_jiffies; - u32 last, cur; - int rc; - - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) - return rc; - cur &= 0xf; - - last = cur; - last_jiffies = jiffies; - - while (1) { - msleep(interval_msec); - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) - return rc; - cur &= 0xf; - - /* DET stable? */ - if (cur == last) { - if (cur == 1 && time_before(jiffies, timeout)) - continue; - if (time_after(jiffies, last_jiffies + duration)) - return 0; - continue; - } - - /* unstable, start over */ - last = cur; - last_jiffies = jiffies; - - /* check timeout */ - if (time_after(jiffies, timeout)) - return -EBUSY; - } -} - -/** - * sata_phy_resume - resume SATA phy - * @ap: ATA port to resume SATA phy for - * @params: timing parameters { interval, duratinon, timeout } in msec - * - * Resume SATA phy of @ap and debounce it. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int sata_phy_resume(struct ata_port *ap, const unsigned long *params) -{ - u32 scontrol; - int rc; - - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x300; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - /* Some PHYs react badly if SStatus is pounded immediately - * after resuming. Delay 200ms before debouncing. - */ - msleep(200); - - return sata_phy_debounce(ap, params); -} - -static void ata_wait_spinup(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - unsigned long end, secs; - int rc; - - /* first, debounce phy if SATA */ - if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_debounce(ap, sata_deb_timing_hotplug); - - /* if debounced successfully and offline, no need to wait */ - if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) - return; - } - - /* okay, let's give the drive time to spin up */ - end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; - secs = ((end - jiffies) + HZ - 1) / HZ; - - if (time_after(jiffies, end)) - return; - - if (secs > 5) - ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " - "(%lu secs)\n", secs); - - schedule_timeout_uninterruptible(end - jiffies); -} - -/** - * ata_std_prereset - prepare for reset - * @ap: ATA port to be reset - * - * @ap is about to be reset. Initialize it. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_prereset(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - const unsigned long *timing = sata_ehc_deb_timing(ehc); - int rc; - - /* handle link resume & hotplug spinup */ - if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && - (ap->flags & ATA_FLAG_HRST_TO_RESUME)) - ehc->i.action |= ATA_EH_HARDRESET; - - if ((ehc->i.flags & ATA_EHI_HOTPLUGGED) && - (ap->flags & ATA_FLAG_SKIP_D2H_BSY)) - ata_wait_spinup(ap); - - /* if we're about to do hardreset, nothing more to do */ - if (ehc->i.action & ATA_EH_HARDRESET) - return 0; - - /* if SATA, resume phy */ - if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_resume(ap, timing); - if (rc && rc != -EOPNOTSUPP) { - /* phy resume failed */ - ata_port_printk(ap, KERN_WARNING, "failed to resume " - "link for reset (errno=%d)\n", rc); - return rc; - } - } - - /* Wait for !BSY if the controller can wait for the first D2H - * Reg FIS and we don't know that no device is attached. - */ - if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - return 0; -} - -/** - * ata_std_softreset - reset host port via ATA SRST - * @ap: port to reset - * @classes: resulting classes of attached devices - * - * Reset host port using ATA SRST. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_softreset(struct ata_port *ap, unsigned int *classes) -{ - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0, err_mask; - u8 err; - - DPRINTK("ENTER\n"); - - if (ata_port_offline(ap)) { - classes[0] = ATA_DEV_NONE; - goto out; - } - - /* determine if device 0/1 are present */ - if (ata_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && ata_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - err_mask = ata_bus_softreset(ap, devmask); - if (err_mask) { - ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", - err_mask); - return -EIO; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(ap, 0, &err); - if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(ap, 1, &err); - - out: - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** - * sata_std_hardreset - reset host port via SATA phy reset - * @ap: port to reset - * @class: resulting class of attached device - * - * SATA phy-reset host port using DET bits of SControl register. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int sata_std_hardreset(struct ata_port *ap, unsigned int *class) -{ - struct ata_eh_context *ehc = &ap->eh_context; - const unsigned long *timing = sata_ehc_deb_timing(ehc); - u32 scontrol; - int rc; - - DPRINTK("ENTER\n"); - - if (sata_set_spd_needed(ap)) { - /* SATA spec says nothing about how to reconfigure - * spd. To be on the safe side, turn off phy during - * reconfiguration. This works for at least ICH7 AHCI - * and Sil3124. - */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x304; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - sata_set_spd(ap); - } - - /* issue phy wake/reset */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x301; - - if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) - return rc; - - /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 - * 10.4.2 says at least 1 ms. - */ - msleep(1); - - /* bring phy back */ - sata_phy_resume(ap, timing); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (ata_port_offline(ap)) { - *class = ATA_DEV_NONE; - DPRINTK("EXIT, link offline\n"); - return 0; - } - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_printk(ap, KERN_ERR, - "COMRESET failed (device not ready)\n"); - return -EIO; - } - - ap->ops->dev_select(ap, 0); /* probably unnecessary */ - - *class = ata_dev_try_classify(ap, 0, NULL); - - DPRINTK("EXIT, class=%u\n", *class); - return 0; -} - -/** - * ata_std_postreset - standard postreset callback - * @ap: the target ata_port - * @classes: classes of attached devices - * - * This function is invoked after a successful reset. Note that - * the device might have been reset more than once using - * different reset methods before postreset is invoked. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_std_postreset(struct ata_port *ap, unsigned int *classes) -{ - u32 serror; - - DPRINTK("ENTER\n"); - - /* print link status */ - sata_print_link_status(ap); - - /* clear SError */ - if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) - sata_scr_write(ap, SCR_ERROR, serror); - - /* re-enable interrupts */ - if (!ap->ops->error_handler) { - /* FIXME: hack. create a hook instead */ - if (ap->ioaddr.ctl_addr) - ata_irq_on(ap); - } - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* set up device control */ - if (ap->ioaddr.ctl_addr) { - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - else - outb(ap->ctl, ap->ioaddr.ctl_addr); - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_dev_same_device - Determine whether new ID matches configured device - * @dev: device to compare against - * @new_class: class of the new device - * @new_id: IDENTIFY page of the new device - * - * Compare @new_class and @new_id against @dev and determine - * whether @dev is the device indicated by @new_class and - * @new_id. - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if @dev matches @new_class and @new_id, 0 otherwise. - */ -static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, - const u16 *new_id) -{ - const u16 *old_id = dev->id; - unsigned char model[2][41], serial[2][21]; - u64 new_n_sectors; - - if (dev->class != new_class) { - ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", - dev->class, new_class); - return 0; - } - - ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0])); - ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1])); - ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0])); - ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1])); - new_n_sectors = ata_id_n_sectors(new_id); - - if (strcmp(model[0], model[1])) { - ata_dev_printk(dev, KERN_INFO, "model number mismatch " - "'%s' != '%s'\n", model[0], model[1]); - return 0; - } - - if (strcmp(serial[0], serial[1])) { - ata_dev_printk(dev, KERN_INFO, "serial number mismatch " - "'%s' != '%s'\n", serial[0], serial[1]); - return 0; - } - - if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { - ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " - "%llu != %llu\n", - (unsigned long long)dev->n_sectors, - (unsigned long long)new_n_sectors); - return 0; - } - - return 1; -} - -/** - * ata_dev_revalidate - Revalidate ATA device - * @dev: device to revalidate - * @post_reset: is this revalidation after reset? - * - * Re-read IDENTIFY page and make sure @dev is still attached to - * the port. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_dev_revalidate(struct ata_device *dev, int post_reset) -{ - unsigned int class = dev->class; - u16 *id = (void *)dev->ap->sector_buf; - int rc; - - if (!ata_dev_enabled(dev)) { - rc = -ENODEV; - goto fail; - } - - /* read ID data */ - rc = ata_dev_read_id(dev, &class, post_reset, id); - if (rc) - goto fail; - - /* is the device still there? */ - if (!ata_dev_same_device(dev, class, id)) { - rc = -ENODEV; - goto fail; - } - - memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); - - /* configure device according to the new ID */ - rc = ata_dev_configure(dev, 0); - if (rc == 0) - return 0; - - fail: - ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); - return rc; -} - -static const char * const ata_dma_blacklist [] = { - "WDC AC11000H", NULL, - "WDC AC22100H", NULL, - "WDC AC32500H", NULL, - "WDC AC33100H", NULL, - "WDC AC31600H", NULL, - "WDC AC32100H", "24.09P07", - "WDC AC23200L", "21.10N21", - "Compaq CRD-8241B", NULL, - "CRD-8400B", NULL, - "CRD-8480B", NULL, - "CRD-8482B", NULL, - "CRD-84", NULL, - "SanDisk SDP3B", NULL, - "SanDisk SDP3B-64", NULL, - "SANYO CD-ROM CRD", NULL, - "HITACHI CDR-8", NULL, - "HITACHI CDR-8335", NULL, - "HITACHI CDR-8435", NULL, - "Toshiba CD-ROM XM-6202B", NULL, - "TOSHIBA CD-ROM XM-1702BC", NULL, - "CD-532E-A", NULL, - "E-IDE CD-ROM CR-840", NULL, - "CD-ROM Drive/F5A", NULL, - "WPI CDD-820", NULL, - "SAMSUNG CD-ROM SC-148C", NULL, - "SAMSUNG CD-ROM SC", NULL, - "SanDisk SDP3B-64", NULL, - "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL, - "_NEC DV5800A", NULL, - "SAMSUNG CD-ROM SN-124", "N001" -}; - -static int ata_strim(char *s, size_t len) -{ - len = strnlen(s, len); - - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) { - len--; - s[len] = 0; - } - return len; -} - -static int ata_dma_blacklisted(const struct ata_device *dev) -{ - unsigned char model_num[40]; - unsigned char model_rev[16]; - unsigned int nlen, rlen; - int i; - - /* We don't support polling DMA. - * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) - * if the LLDD handles only interrupts in the HSM_ST_LAST state. - */ - if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && - (dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; - - ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS, - sizeof(model_rev)); - nlen = ata_strim(model_num, sizeof(model_num)); - rlen = ata_strim(model_rev, sizeof(model_rev)); - - for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) { - if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) { - if (ata_dma_blacklist[i+1] == NULL) - return 1; - if (!strncmp(ata_dma_blacklist[i], model_rev, rlen)) - return 1; - } - } - return 0; -} - -/** - * ata_dev_xfermask - Compute supported xfermask of the given device - * @dev: Device to compute xfermask for - * - * Compute supported xfermask of @dev and store it in - * dev->*_mask. This function is responsible for applying all - * known limits including host controller limits, device - * blacklist, etc... - * - * FIXME: The current implementation limits all transfer modes to - * the fastest of the lowested device on the port. This is not - * required on most controllers. - * - * LOCKING: - * None. - */ -static void ata_dev_xfermask(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - struct ata_host_set *hs = ap->host_set; - unsigned long xfer_mask; - int i; - - xfer_mask = ata_pack_xfermask(ap->pio_mask, - ap->mwdma_mask, ap->udma_mask); - - /* Apply cable rule here. Don't apply it early because when - * we handle hot plug the cable type can itself change. - */ - if (ap->cbl == ATA_CBL_PATA40) - xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); - - /* FIXME: Use port-wide xfermask for now */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *d = &ap->device[i]; - - if (ata_dev_absent(d)) - continue; - - if (ata_dev_disabled(d)) { - /* to avoid violating device selection timing */ - xfer_mask &= ata_pack_xfermask(d->pio_mask, - UINT_MAX, UINT_MAX); - continue; - } - - xfer_mask &= ata_pack_xfermask(d->pio_mask, - d->mwdma_mask, d->udma_mask); - xfer_mask &= ata_id_xfermask(d->id); - if (ata_dma_blacklisted(d)) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - } - - if (ata_dma_blacklisted(dev)) - ata_dev_printk(dev, KERN_WARNING, - "device is on DMA blacklist, disabling DMA\n"); - - if (hs->flags & ATA_HOST_SIMPLEX) { - if (hs->simplex_claimed) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - } - - if (ap->ops->mode_filter) - xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); - - ata_unpack_xfermask(xfer_mask, &dev->pio_mask, - &dev->mwdma_mask, &dev->udma_mask); -} - -/** - * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command - * @dev: Device to which command will be sent - * - * Issue SET FEATURES - XFER MODE command to device @dev - * on port @ap. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, AC_ERR_* mask otherwise. - */ - -static unsigned int ata_dev_set_xfermode(struct ata_device *dev) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - /* set up set-features taskfile */ - DPRINTK("set features - xfer mode\n"); - - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_SET_FEATURES; - tf.feature = SETFEATURES_XFER; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - tf.nsect = dev->xfer_mode; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - - DPRINTK("EXIT, err_mask=%x\n", err_mask); - return err_mask; -} - -/** - * ata_dev_init_params - Issue INIT DEV PARAMS command - * @dev: Device to which command will be sent - * @heads: Number of heads (taskfile parameter) - * @sectors: Number of sectors (taskfile parameter) - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, AC_ERR_* mask otherwise. - */ -static unsigned int ata_dev_init_params(struct ata_device *dev, - u16 heads, u16 sectors) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - /* Number of sectors per track 1-255. Number of heads 1-16 */ - if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) - return AC_ERR_INVALID; - - /* set up init dev params taskfile */ - DPRINTK("init dev params \n"); - - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_INIT_DEV_PARAMS; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - tf.nsect = sectors; - tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - - DPRINTK("EXIT, err_mask=%x\n", err_mask); - return err_mask; -} - -/** - * ata_sg_clean - Unmap DMA memory associated with command - * @qc: Command containing DMA memory to be released - * - * Unmap all mapped DMA memory associated with this command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_sg_clean(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - int dir = qc->dma_dir; - void *pad_buf = NULL; - - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); - WARN_ON(sg == NULL); - - if (qc->flags & ATA_QCFLAG_SINGLE) - WARN_ON(qc->n_elem > 1); - - VPRINTK("unmapping %u sg elements\n", qc->n_elem); - - /* if we padded the buffer out to 32-bit bound, and data - * xfer direction is from-device, we must copy from the - * pad buffer back into the supplied buffer - */ - if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) - pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - - if (qc->flags & ATA_QCFLAG_SG) { - if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); - /* restore last sg */ - sg[qc->orig_n_elem - 1].length += qc->pad_len; - if (pad_buf) { - struct scatterlist *psg = &qc->pad_sgent; - void *addr = kmap_atomic(psg->page, KM_IRQ0); - memcpy(addr + psg->offset, pad_buf, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - } else { - if (qc->n_elem) - dma_unmap_single(ap->dev, - sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), - dir); - /* restore sg */ - sg->length += qc->pad_len; - if (pad_buf) - memcpy(qc->buf_virt + sg->length - qc->pad_len, - pad_buf, qc->pad_len); - } - - qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->__sg = NULL; -} - -/** - * ata_fill_sg - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - */ -static void ata_fill_sg(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int idx; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - idx = 0; - ata_for_each_sg(sg, qc) { - u32 addr, offset; - u32 sg_len, len; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - ap->prd[idx].addr = cpu_to_le32(addr); - ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); - - idx++; - sg_len -= len; - addr += len; - } - } - - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} -/** - * ata_check_atapi_dma - Check whether ATAPI DMA can be supported - * @qc: Metadata associated with taskfile to check - * - * Allow low-level driver to filter ATA PACKET commands, returning - * a status indicating whether or not it is OK to use DMA for the - * supplied PACKET command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: 0 when ATAPI DMA can be used - * nonzero otherwise - */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - int rc = 0; /* Assume ATAPI DMA is OK by default */ - - if (ap->ops->check_atapi_dma) - rc = ap->ops->check_atapi_dma(qc); - - return rc; -} -/** - * ata_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg(qc); -} - -void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } - -/** - * ata_sg_init_one - Associate command with memory buffer - * @qc: Command to be associated - * @buf: Memory buffer - * @buflen: Length of memory buffer, in bytes. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a single memory buffer, @buf of byte length @buflen. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) -{ - struct scatterlist *sg; - - qc->flags |= ATA_QCFLAG_SINGLE; - - memset(&qc->sgent, 0, sizeof(qc->sgent)); - qc->__sg = &qc->sgent; - qc->n_elem = 1; - qc->orig_n_elem = 1; - qc->buf_virt = buf; - qc->nbytes = buflen; - - sg = qc->__sg; - sg_init_one(sg, buf, buflen); -} - -/** - * ata_sg_init - Associate command with scatter-gather table. - * @qc: Command to be associated - * @sg: Scatter-gather table. - * @n_elem: Number of elements in s/g table. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a scatter-gather table @sg, containing @n_elem - * elements. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, - unsigned int n_elem) -{ - qc->flags |= ATA_QCFLAG_SG; - qc->__sg = sg; - qc->n_elem = n_elem; - qc->orig_n_elem = n_elem; -} - -/** - * ata_sg_setup_one - DMA-map the memory buffer associated with a command. - * @qc: Command with memory buffer to be mapped. - * - * DMA-map the memory buffer associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, negative on error. - */ - -static int ata_sg_setup_one(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - int dir = qc->dma_dir; - struct scatterlist *sg = qc->__sg; - dma_addr_t dma_address; - int trim_sg = 0; - - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = sg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); - - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - if (qc->tf.flags & ATA_TFLAG_WRITE) - memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len, - qc->pad_len); - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim sg */ - sg->length -= qc->pad_len; - if (sg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg->length=%u pad_len=%u\n", - sg->length, qc->pad_len); - } - - if (trim_sg) { - qc->n_elem--; - goto skip_map; - } - - dma_address = dma_map_single(ap->dev, qc->buf_virt, - sg->length, dir); - if (dma_mapping_error(dma_address)) { - /* restore sg */ - sg->length += qc->pad_len; - return -1; - } - - sg_dma_address(sg) = dma_address; - sg_dma_len(sg) = sg->length; - -skip_map: - DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), - qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - return 0; -} - -/** - * ata_sg_setup - DMA-map the scatter-gather table associated with a command. - * @qc: Command with scatter-gather table to be mapped. - * - * DMA-map the scatter-gather table associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, negative on error. - * - */ - -static int ata_sg_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - struct scatterlist *lsg = &sg[qc->n_elem - 1]; - int n_elem, pre_n_elem, dir, trim_sg = 0; - - VPRINTK("ENTER, ata%u\n", ap->id); - WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); - - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = lsg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - unsigned int offset; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); - - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - /* - * psg->page/offset are used to copy to-be-written - * data in this function or read data in ata_sg_clean. - */ - offset = lsg->offset + lsg->length - qc->pad_len; - psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT); - psg->offset = offset_in_page(offset); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - void *addr = kmap_atomic(psg->page, KM_IRQ0); - memcpy(pad_buf, addr + psg->offset, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim last sg */ - lsg->length -= qc->pad_len; - if (lsg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", - qc->n_elem - 1, lsg->length, qc->pad_len); - } - - pre_n_elem = qc->n_elem; - if (trim_sg && pre_n_elem) - pre_n_elem--; - - if (!pre_n_elem) { - n_elem = 0; - goto skip_map; - } - - dir = qc->dma_dir; - n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); - if (n_elem < 1) { - /* restore last sg */ - lsg->length += qc->pad_len; - return -1; - } - - DPRINTK("%d sg elements mapped\n", n_elem); - -skip_map: - qc->n_elem = n_elem; - - return 0; -} - -/** - * swap_buf_le16 - swap halves of 16-bit words in place - * @buf: Buffer to swap - * @buf_words: Number of 16-bit words in buffer. - * - * Swap halves of 16-bit words if needed to convert from - * little-endian byte order to native cpu byte order, or - * vice-versa. - * - * LOCKING: - * Inherited from caller. - */ -void swap_buf_le16(u16 *buf, unsigned int buf_words) -{ -#ifdef __BIG_ENDIAN - unsigned int i; - - for (i = 0; i < buf_words; i++) - buf[i] = le16_to_cpu(buf[i]); -#endif /* __BIG_ENDIAN */ -} - -/** - * ata_mmio_data_xfer - Transfer data by MMIO - * @adev: device for this I/O - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->ap; - unsigned int i; - unsigned int words = buflen >> 1; - u16 *buf16 = (u16 *) buf; - void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr; - - /* Transfer multiple of 2 bytes */ - if (write_data) { - for (i = 0; i < words; i++) - writew(le16_to_cpu(buf16[i]), mmio); - } else { - for (i = 0; i < words; i++) - buf16[i] = cpu_to_le16(readw(mmio)); - } - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - writew(le16_to_cpu(align_buf[0]), mmio); - } else { - align_buf[0] = cpu_to_le16(readw(mmio)); - memcpy(trailing_buf, align_buf, 1); - } - } -} - -/** - * ata_pio_data_xfer - Transfer data by PIO - * @adev: device to target - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by PIO. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->ap; - unsigned int words = buflen >> 1; - - /* Transfer multiple of 2 bytes */ - if (write_data) - outsw(ap->ioaddr.data_addr, buf, words); - else - insw(ap->ioaddr.data_addr, buf, words); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); - } else { - align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr)); - memcpy(trailing_buf, align_buf, 1); - } - } -} - -/** - * ata_pio_data_xfer_noirq - Transfer data by PIO - * @adev: device to target - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by PIO. Do the - * transfer with interrupts disabled. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - unsigned long flags; - local_irq_save(flags); - ata_pio_data_xfer(adev, buf, buflen, write_data); - local_irq_restore(flags); -} - - -/** - * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. - * @qc: Command on going - * - * Transfer ATA_SECT_SIZE of data from/to the ATA device. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sector(struct ata_queued_cmd *qc) -{ - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; - struct ata_port *ap = qc->ap; - struct page *page; - unsigned int offset; - unsigned char *buf; - - if (qc->cursect == (qc->nsect - 1)) - ap->hsm_task_state = HSM_ST_LAST; - - page = sg[qc->cursg].page; - offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use a bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); - } - - qc->cursect++; - qc->cursg_ofs++; - - if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) { - qc->cursg++; - qc->cursg_ofs = 0; - } -} - -/** - * ata_pio_sectors - Transfer one or many 512-byte sectors. - * @qc: Command on going - * - * Transfer one or many ATA_SECT_SIZE of data from/to the - * ATA device for the DRQ request. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sectors(struct ata_queued_cmd *qc) -{ - if (is_multi_taskfile(&qc->tf)) { - /* READ/WRITE MULTIPLE */ - unsigned int nsect; - - WARN_ON(qc->dev->multi_count == 0); - - nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); - while (nsect--) - ata_pio_sector(qc); - } else - ata_pio_sector(qc); -} - -/** - * atapi_send_cdb - Write CDB bytes to hardware - * @ap: Port to which ATAPI device is attached. - * @qc: Taskfile currently active - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * - * LOCKING: - * caller. - */ - -static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: - ap->hsm_task_state = HSM_ST; - break; - case ATA_PROT_ATAPI_NODATA: - ap->hsm_task_state = HSM_ST_LAST; - break; - case ATA_PROT_ATAPI_DMA: - ap->hsm_task_state = HSM_ST_LAST; - /* initiate bmdma */ - ap->ops->bmdma_start(qc); - break; - } -} - -/** - * __atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * @bytes: number of bytes - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - * - */ - -static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) -{ - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; - struct ata_port *ap = qc->ap; - struct page *page; - unsigned char *buf; - unsigned int offset, count; - - if (qc->curbytes + bytes >= qc->nbytes) - ap->hsm_task_state = HSM_ST_LAST; - -next_sg: - if (unlikely(qc->cursg >= qc->n_elem)) { - /* - * The end of qc->sg is reached and the device expects - * more data to transfer. In order not to overrun qc->sg - * and fulfill length specified in the byte count register, - * - for read case, discard trailing data from the device - * - for write case, padding zero data to the device - */ - u16 pad_buf[1] = { 0 }; - unsigned int words = bytes >> 1; - unsigned int i; - - if (words) /* warning if bytes > 1 */ - ata_dev_printk(qc->dev, KERN_WARNING, - "%u bytes trailing data\n", bytes); - - for (i = 0; i < words; i++) - ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); - - ap->hsm_task_state = HSM_ST_LAST; - return; - } - - sg = &qc->__sg[qc->cursg]; - - page = sg->page; - offset = sg->offset + qc->cursg_ofs; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - /* don't overrun current sg */ - count = min(sg->length - qc->cursg_ofs, bytes); - - /* don't cross page boundaries */ - count = min(count, (unsigned int)PAGE_SIZE - offset); - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); - } - - bytes -= count; - qc->curbytes += count; - qc->cursg_ofs += count; - - if (qc->cursg_ofs == sg->length) { - qc->cursg++; - qc->cursg_ofs = 0; - } - - if (bytes) - goto next_sg; -} - -/** - * atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - */ - -static void atapi_pio_bytes(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_device *dev = qc->dev; - unsigned int ireason, bc_lo, bc_hi, bytes; - int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; - - /* Abuse qc->result_tf for temp storage of intermediate TF - * here to save some kernel stack usage. - * For normal completion, qc->result_tf is not relevant. For - * error, qc->result_tf is later overwritten by ata_qc_complete(). - * So, the correctness of qc->result_tf is not affected. - */ - ap->ops->tf_read(ap, &qc->result_tf); - ireason = qc->result_tf.nsect; - bc_lo = qc->result_tf.lbam; - bc_hi = qc->result_tf.lbah; - bytes = (bc_hi << 8) | bc_lo; - - /* shall be cleared to zero, indicating xfer of data */ - if (ireason & (1 << 0)) - goto err_out; - - /* make sure transfer direction matches expected */ - i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; - if (do_write != i_write) - goto err_out; - - VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); - - __atapi_pio_bytes(qc, bytes); - - return; - -err_out: - ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n"); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; -} - -/** - * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. - * @ap: the target ata_port - * @qc: qc on going - * - * RETURNS: - * 1 if ok in workqueue, 0 otherwise. - */ - -static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - if (qc->tf.flags & ATA_TFLAG_POLLING) - return 1; - - if (ap->hsm_task_state == HSM_ST_FIRST) { - if (qc->tf.protocol == ATA_PROT_PIO && - (qc->tf.flags & ATA_TFLAG_WRITE)) - return 1; - - if (is_atapi_taskfile(&qc->tf) && - !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; - } - - return 0; -} - -/** - * ata_hsm_qc_complete - finish a qc running on standard HSM - * @qc: Command to complete - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * Finish @qc which is running on standard HSM. - * - * LOCKING: - * If @in_wq is zero, spin_lock_irqsave(host_set lock). - * Otherwise, none on entry and grabs host lock. - */ -static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - if (ap->ops->error_handler) { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - - /* EH might have kicked in while host_set lock - * is released. - */ - qc = ata_qc_from_tag(ap, qc->tag); - if (qc) { - if (likely(!(qc->err_mask & AC_ERR_HSM))) { - ata_irq_on(ap); - ata_qc_complete(qc); - } else - ata_port_freeze(ap); - } - - spin_unlock_irqrestore(ap->lock, flags); - } else { - if (likely(!(qc->err_mask & AC_ERR_HSM))) - ata_qc_complete(qc); - else - ata_port_freeze(ap); - } - } else { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - ata_irq_on(ap); - ata_qc_complete(qc); - spin_unlock_irqrestore(ap->lock, flags); - } else - ata_qc_complete(qc); - } - - ata_altstatus(ap); /* flush */ -} - -/** - * ata_hsm_move - move the HSM to the next state. - * @ap: the target ata_port - * @qc: qc on going - * @status: current device status - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * RETURNS: - * 1 when poll next status needed, 0 otherwise. - */ -int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, - u8 status, int in_wq) -{ - unsigned long flags = 0; - int poll_next; - - WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); - - /* Make sure ata_qc_issue_prot() does not throw things - * like DMA polling into the workqueue. Notice that - * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). - */ - WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); - -fsm_start: - DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, ap->hsm_task_state, status); - - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Send first data block or PACKET CDB */ - - /* If polling, we will stay in the work queue after - * sending the data. Otherwise, interrupt handler - * takes over after sending the data. - */ - poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); - - /* check device status */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", - ap->id, status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - if (in_wq) - spin_lock_irqsave(ap->lock, flags); - - if (qc->tf.protocol == ATA_PROT_PIO) { - /* PIO data out protocol. - * send first data block. - */ - - /* ata_pio_sectors() might change the state - * to HSM_ST_LAST. so, the state is changed here - * before ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST; - ata_pio_sectors(qc); - ata_altstatus(ap); /* flush */ - } else - /* send CDB */ - atapi_send_cdb(ap, qc); - - if (in_wq) - spin_unlock_irqrestore(ap->lock, flags); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - break; - - case HSM_ST: - /* complete command or read/write the data register */ - if (qc->tf.protocol == ATA_PROT_ATAPI) { - /* ATAPI PIO protocol */ - if ((status & ATA_DRQ) == 0) { - /* No more data to transfer or device error. - * Device error will be tagged in HSM_ST_LAST. - */ - ap->hsm_task_state = HSM_ST_LAST; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", - ap->id, status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - atapi_pio_bytes(qc); - - if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) - /* bad ireason reported by device */ - goto fsm_start; - - } else { - /* ATA PIO protocol */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* For PIO reads, some devices may ask for - * data transfer (DRQ=1) alone with ERR=1. - * We respect DRQ here and transfer one - * block of junk data before changing the - * hsm_task_state to HSM_ST_ERR. - * - * For PIO writes, ERR=1 DRQ=1 doesn't make - * sense since the data block has been - * transferred to the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - /* data might be corrputed */ - qc->err_mask |= AC_ERR_DEV; - - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { - ata_pio_sectors(qc); - ata_altstatus(ap); - status = ata_wait_idle(ap); - } - - if (status & (ATA_BUSY | ATA_DRQ)) - qc->err_mask |= AC_ERR_HSM; - - /* ata_pio_sectors() might change the - * state to HSM_ST_LAST. so, the state - * is changed after ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - ata_pio_sectors(qc); - - if (ap->hsm_task_state == HSM_ST_LAST && - (!(qc->tf.flags & ATA_TFLAG_WRITE))) { - /* all data read */ - ata_altstatus(ap); - status = ata_wait_idle(ap); - goto fsm_start; - } - } - - ata_altstatus(ap); /* flush */ - poll_next = 1; - break; - - case HSM_ST_LAST: - if (unlikely(!ata_ok(status))) { - qc->err_mask |= __ac_err_mask(status); - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* no more data to transfer */ - DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", - ap->id, qc->dev->devno, status); - - WARN_ON(qc->err_mask); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); - - poll_next = 0; - break; - - case HSM_ST_ERR: - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(qc->err_mask == 0); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); - - poll_next = 0; - break; - default: - poll_next = 0; - BUG(); - } - - return poll_next; -} - -static void ata_pio_task(void *_data) -{ - struct ata_queued_cmd *qc = _data; - struct ata_port *ap = qc->ap; - u8 status; - int poll_next; - -fsm_start: - WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); - - /* - * This is purely heuristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, queue delayed work. - */ - status = ata_busy_wait(ap, ATA_BUSY, 5); - if (status & ATA_BUSY) { - msleep(2); - status = ata_busy_wait(ap, ATA_BUSY, 10); - if (status & ATA_BUSY) { - ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); - return; - } - } - - /* move the HSM */ - poll_next = ata_hsm_move(ap, qc, status, 1); - - /* another command or interrupt handler - * may be running at this point. - */ - if (poll_next) - goto fsm_start; -} - -/** - * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @dev: Device from whom we request an available command structure - * - * LOCKING: - * None. - */ - -static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) -{ - struct ata_queued_cmd *qc = NULL; - unsigned int i; - - /* no command while frozen */ - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - - /* the last tag is reserved for internal command. */ - for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qc_allocated)) { - qc = __ata_qc_from_tag(ap, i); - break; - } - - if (qc) - qc->tag = i; - - return qc; -} - -/** - * ata_qc_new_init - Request an available ATA command, and initialize it - * @dev: Device from whom we request an available command structure - * - * LOCKING: - * None. - */ - -struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - struct ata_queued_cmd *qc; - - qc = ata_qc_new(ap); - if (qc) { - qc->scsicmd = NULL; - qc->ap = ap; - qc->dev = dev; - - ata_qc_reinit(qc); - } - - return qc; -} - -/** - * ata_qc_free - free unused ata_queued_cmd - * @qc: Command to complete - * - * Designed to free unused ata_queued_cmd object - * in case something prevents using it. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_free(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int tag; - - WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - - qc->flags = 0; - tag = qc->tag; - if (likely(ata_tag_valid(tag))) { - qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qc_allocated); - } -} - -void __ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - - if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) - ata_sg_clean(qc); - - /* command should be marked inactive atomically with qc completion */ - if (qc->tf.protocol == ATA_PROT_NCQ) - ap->sactive &= ~(1 << qc->tag); - else - ap->active_tag = ATA_TAG_POISON; - - /* atapi: mark qc as inactive to prevent the interrupt handler - * from completing the command twice later, before the error handler - * is called. (when rc != 0 and atapi request sense is needed) - */ - qc->flags &= ~ATA_QCFLAG_ACTIVE; - ap->qc_active &= ~(1 << qc->tag); - - /* call completion callback */ - qc->complete_fn(qc); -} - -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* XXX: New EH and old EH use different mechanisms to - * synchronize EH with regular execution path. - * - * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. - * Normal execution path is responsible for not accessing a - * failed qc. libata core enforces the rule by returning NULL - * from ata_qc_from_tag() for failed qcs. - * - * Old EH depends on ata_qc_complete() nullifying completion - * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does - * not synchronize with interrupt handler. Only PIO task is - * taken care of. - */ - if (ap->ops->error_handler) { - WARN_ON(ap->pflags & ATA_PFLAG_FROZEN); - - if (unlikely(qc->err_mask)) - qc->flags |= ATA_QCFLAG_FAILED; - - if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { - if (!ata_tag_internal(qc->tag)) { - /* always fill result TF for failed qc */ - ap->ops->tf_read(ap, &qc->result_tf); - ata_qc_schedule_eh(qc); - return; - } - } - - /* read result TF if requested */ - if (qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); - - __ata_qc_complete(qc); - } else { - if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) - return; - - /* read result TF if failed or requested */ - if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); - - __ata_qc_complete(qc); - } -} - -/** - * ata_qc_complete_multiple - Complete multiple qcs successfully - * @ap: port in question - * @qc_active: new qc_active mask - * @finish_qc: LLDD callback invoked before completing a qc - * - * Complete in-flight commands. This functions is meant to be - * called from low-level driver's interrupt routine to complete - * requests normally. ap->qc_active and @qc_active is compared - * and commands are completed accordingly. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Number of completed commands on success, -errno otherwise. - */ -int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, - void (*finish_qc)(struct ata_queued_cmd *)) -{ - int nr_done = 0; - u32 done_mask; - int i; - - done_mask = ap->qc_active ^ qc_active; - - if (unlikely(done_mask & qc_active)) { - ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " - "(%08x->%08x)\n", ap->qc_active, qc_active); - return -EINVAL; - } - - for (i = 0; i < ATA_MAX_QUEUE; i++) { - struct ata_queued_cmd *qc; - - if (!(done_mask & (1 << i))) - continue; - - if ((qc = ata_qc_from_tag(ap, i))) { - if (finish_qc) - finish_qc(qc); - ata_qc_complete(qc); - nr_done++; - } - } - - return nr_done; -} - -static inline int ata_should_dma_map(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - switch (qc->tf.protocol) { - case ATA_PROT_NCQ: - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - return 1; - - case ATA_PROT_ATAPI: - case ATA_PROT_PIO: - if (ap->flags & ATA_FLAG_PIO_DMA) - return 1; - - /* fall through */ - - default: - return 0; - } - - /* never reached */ -} - -/** - * ata_qc_issue - issue taskfile to device - * @qc: command to issue to device - * - * Prepare an ATA command to submission to device. - * This includes mapping the data into a DMA-able - * area, filling in the S/G table, and finally - * writing the taskfile to hardware, starting the command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Make sure only one non-NCQ command is outstanding. The - * check is skipped for old EH because it reuses active qc to - * request ATAPI sense. - */ - WARN_ON(ap->ops->error_handler && ata_tag_valid(ap->active_tag)); - - if (qc->tf.protocol == ATA_PROT_NCQ) { - WARN_ON(ap->sactive & (1 << qc->tag)); - ap->sactive |= 1 << qc->tag; - } else { - WARN_ON(ap->sactive); - ap->active_tag = qc->tag; - } - - qc->flags |= ATA_QCFLAG_ACTIVE; - ap->qc_active |= 1 << qc->tag; - - if (ata_should_dma_map(qc)) { - if (qc->flags & ATA_QCFLAG_SG) { - if (ata_sg_setup(qc)) - goto sg_err; - } else if (qc->flags & ATA_QCFLAG_SINGLE) { - if (ata_sg_setup_one(qc)) - goto sg_err; - } - } else { - qc->flags &= ~ATA_QCFLAG_DMAMAP; - } - - ap->ops->qc_prep(qc); - - qc->err_mask |= ap->ops->qc_issue(qc); - if (unlikely(qc->err_mask)) - goto err; - return; - -sg_err: - qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->err_mask |= AC_ERR_SYSTEM; -err: - ata_qc_complete(qc); -} - -/** - * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner - * @qc: command to issue to device - * - * Using various libata functions and hooks, this function - * starts an ATA command. ATA commands are grouped into - * classes called "protocols", and issuing each type of protocol - * is slightly different. - * - * May be used as the qc_issue() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ - -unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Use polling pio if the LLD doesn't handle - * interrupt driven pio and atapi CDB interrupt. - */ - if (ap->flags & ATA_FLAG_PIO_POLLING) { - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: - qc->tf.flags |= ATA_TFLAG_POLLING; - break; - case ATA_PROT_ATAPI_DMA: - if (qc->dev->flags & ATA_DFLAG_CDB_INTR) - /* see ata_dma_blacklisted() */ - BUG(); - break; - default: - break; - } - } - - /* select the device */ - ata_dev_select(ap, qc->dev->devno, 1, 0); - - /* start the command */ - switch (qc->tf.protocol) { - case ATA_PROT_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - ap->hsm_task_state = HSM_ST_LAST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - break; - - case ATA_PROT_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->ops->bmdma_start(qc); /* initiate bmdma */ - ap->hsm_task_state = HSM_ST_LAST; - break; - - case ATA_PROT_PIO: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* PIO data out protocol */ - ap->hsm_task_state = HSM_ST_FIRST; - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - /* always send first data block using - * the ata_pio_task() codepath. - */ - } else { - /* PIO data in protocol */ - ap->hsm_task_state = HSM_ST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - } - - break; - - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || - (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - break; - - case ATA_PROT_ATAPI_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - break; - - default: - WARN_ON(1); - return AC_ERR_SYSTEM; - } - - return 0; -} - -/** - * ata_host_intr - Handle host interrupt for given (port, task) - * @ap: Port on which interrupt arrived (possibly...) - * @qc: Taskfile currently active in engine - * - * Handle host interrupt for given queued command. Currently, - * only DMA interrupts are handled. All other commands are - * handled via polling with interrupts disabled (nIEN bit). - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * One if interrupt was handled, zero if not (shared irq). - */ - -inline unsigned int ata_host_intr (struct ata_port *ap, - struct ata_queued_cmd *qc) -{ - u8 status, host_stat = 0; - - VPRINTK("ata%u: protocol %d task_state %d\n", - ap->id, qc->tf.protocol, ap->hsm_task_state); - - /* Check whether we are expecting interrupt in this state */ - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. - */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto idle_irq; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) - goto idle_irq; - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } - break; - case HSM_ST: - break; - default: - goto idle_irq; - } - - /* check altstatus */ - status = ata_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto idle_irq; - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_hsm_move(ap, qc, status, 0); - return 1; /* irq handled */ - -idle_irq: - ap->stats.idle_irq++; - -#ifdef ATA_IRQ_TRAP - if ((ap->stats.idle_irq % 1000) == 0) { - ata_irq_ack(ap, 0); /* debug trap */ - ata_port_printk(ap, KERN_WARNING, "irq trap\n"); - return 1; - } -#endif - return 0; /* irq not handled */ -} - -/** - * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host_set information structure - * @regs: unused - * - * Default interrupt handler for PCI IDE devices. Calls - * ata_host_intr() for each port that is not disabled. - * - * LOCKING: - * Obtains host_set lock during operation. - * - * RETURNS: - * IRQ_NONE or IRQ_HANDLED. - */ - -irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - - /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host_set->lock, flags); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap; - - ap = host_set->ports[i]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && - (qc->flags & ATA_QCFLAG_ACTIVE)) - handled |= ata_host_intr(ap, qc); - } - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - return IRQ_RETVAL(handled); -} - -/** - * sata_scr_valid - test whether SCRs are accessible - * @ap: ATA port to test SCR accessibility for - * - * Test whether SCRs are accessible for @ap. - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if SCRs are accessible, 0 otherwise. - */ -int sata_scr_valid(struct ata_port *ap) -{ - return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read; -} - -/** - * sata_scr_read - read SCR register of the specified port - * @ap: ATA port to read SCR for - * @reg: SCR to read - * @val: Place to store read value - * - * Read SCR register @reg of @ap into *@val. This function is - * guaranteed to succeed if the cable type of the port is SATA - * and the port implements ->scr_read. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_read(struct ata_port *ap, int reg, u32 *val) -{ - if (sata_scr_valid(ap)) { - *val = ap->ops->scr_read(ap, reg); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * sata_scr_write - write SCR register of the specified port - * @ap: ATA port to write SCR for - * @reg: SCR to write - * @val: value to write - * - * Write @val to SCR register @reg of @ap. This function is - * guaranteed to succeed if the cable type of the port is SATA - * and the port implements ->scr_read. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_write(struct ata_port *ap, int reg, u32 val) -{ - if (sata_scr_valid(ap)) { - ap->ops->scr_write(ap, reg, val); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * sata_scr_write_flush - write SCR register of the specified port and flush - * @ap: ATA port to write SCR for - * @reg: SCR to write - * @val: value to write - * - * This function is identical to sata_scr_write() except that this - * function performs flush after writing to the register. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) -{ - if (sata_scr_valid(ap)) { - ap->ops->scr_write(ap, reg, val); - ap->ops->scr_read(ap, reg); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * ata_port_online - test whether the given port is online - * @ap: ATA port to test - * - * Test whether @ap is online. Note that this function returns 0 - * if online status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if the port online status is available and online. - */ -int ata_port_online(struct ata_port *ap) -{ - u32 sstatus; - - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) - return 1; - return 0; -} - -/** - * ata_port_offline - test whether the given port is offline - * @ap: ATA port to test - * - * Test whether @ap is offline. Note that this function returns - * 0 if offline status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if the port offline status is available and offline. - */ -int ata_port_offline(struct ata_port *ap) -{ - u32 sstatus; - - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) - return 1; - return 0; -} - -int ata_flush_cache(struct ata_device *dev) -{ - unsigned int err_mask; - u8 cmd; - - if (!ata_try_flush_cache(dev)) - return 0; - - if (ata_id_has_flush_ext(dev->id)) - cmd = ATA_CMD_FLUSH_EXT; - else - cmd = ATA_CMD_FLUSH; - - err_mask = ata_do_simple_cmd(dev, cmd); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n"); - return -EIO; - } - - return 0; -} - -static int ata_host_set_request_pm(struct ata_host_set *host_set, - pm_message_t mesg, unsigned int action, - unsigned int ehi_flags, int wait) -{ - unsigned long flags; - int i, rc; - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - /* Previous resume operation might still be in - * progress. Wait for PM_PENDING to clear. - */ - if (ap->pflags & ATA_PFLAG_PM_PENDING) { - ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); - } - - /* request PM ops to EH */ - spin_lock_irqsave(ap->lock, flags); - - ap->pm_mesg = mesg; - if (wait) { - rc = 0; - ap->pm_result = &rc; - } - - ap->pflags |= ATA_PFLAG_PM_PENDING; - ap->eh_info.action |= action; - ap->eh_info.flags |= ehi_flags; - - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - /* wait and check result */ - if (wait) { - ata_port_wait_eh(ap); - WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); - if (rc) - return rc; - } - } - - return 0; -} - -/** - * ata_host_set_suspend - suspend host_set - * @host_set: host_set to suspend - * @mesg: PM message - * - * Suspend @host_set. Actual operation is performed by EH. This - * function requests EH to perform PM operations and waits for EH - * to finish. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) -{ - int i, j, rc; - - rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1); - if (rc) - goto fail; - - /* EH is quiescent now. Fail if we have any ready device. - * This happens if hotplug occurs between completion of device - * suspension and here. - */ - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - for (j = 0; j < ATA_MAX_DEVICES; j++) { - struct ata_device *dev = &ap->device[j]; - - if (ata_dev_ready(dev)) { - ata_port_printk(ap, KERN_WARNING, - "suspend failed, device %d " - "still active\n", dev->devno); - rc = -EBUSY; - goto fail; - } - } - } - - host_set->dev->power.power_state = mesg; - return 0; - - fail: - ata_host_set_resume(host_set); - return rc; -} - -/** - * ata_host_set_resume - resume host_set - * @host_set: host_set to resume - * - * Resume @host_set. Actual operation is performed by EH. This - * function requests EH to perform PM operations and returns. - * Note that all resume operations are performed parallely. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_host_set_resume(struct ata_host_set *host_set) -{ - ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET, - ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); - host_set->dev->power.power_state = PMSG_ON; -} - -/** - * ata_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - -int ata_port_start (struct ata_port *ap) -{ - struct device *dev = ap->dev; - int rc; - - ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL); - if (!ap->prd) - return -ENOMEM; - - rc = ata_pad_alloc(ap, dev); - if (rc) { - dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); - return rc; - } - - DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma); - - return 0; -} - - -/** - * ata_port_stop - Undo ata_port_start() - * @ap: Port to shut down - * - * Frees the PRD table. - * - * May be used as the port_stop() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_port_stop (struct ata_port *ap) -{ - struct device *dev = ap->dev; - - dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); - ata_pad_free(ap, dev); -} - -void ata_host_stop (struct ata_host_set *host_set) -{ - if (host_set->mmio_base) - iounmap(host_set->mmio_base); -} - -/** - * ata_dev_init - Initialize an ata_device structure - * @dev: Device structure to initialize - * - * Initialize @dev in preparation for probing. - * - * LOCKING: - * Inherited from caller. - */ -void ata_dev_init(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - unsigned long flags; - - /* SATA spd limit is bound to the first device */ - ap->sata_spd_limit = ap->hw_sata_spd_limit; - - /* High bits of dev->flags are used to record warm plug - * requests which occur asynchronously. Synchronize using - * host_set lock. - */ - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_INIT_MASK; - spin_unlock_irqrestore(ap->lock, flags); - - memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, - sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); - dev->pio_mask = UINT_MAX; - dev->mwdma_mask = UINT_MAX; - dev->udma_mask = UINT_MAX; -} - -/** - * ata_host_init - Initialize an ata_port structure - * @ap: Structure to initialize - * @host: associated SCSI mid-layer structure - * @host_set: Collection of hosts to which @ap belongs - * @ent: Probe information provided by low-level driver - * @port_no: Port number associated with this ata_port - * - * Initialize a new ata_port structure, and its associated - * scsi_host. - * - * LOCKING: - * Inherited from caller. - */ -static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, - struct ata_host_set *host_set, - const struct ata_probe_ent *ent, unsigned int port_no) -{ - unsigned int i; - - host->max_id = 16; - host->max_lun = 1; - host->max_channel = 1; - host->unique_id = ata_unique_id++; - host->max_cmd_len = 12; - - ap->lock = &host_set->lock; - ap->flags = ATA_FLAG_DISABLED; - ap->id = host->unique_id; - ap->host = host; - ap->ctl = ATA_DEVCTL_OBS; - ap->host_set = host_set; - ap->dev = ent->dev; - ap->port_no = port_no; - ap->hard_port_no = - ent->legacy_mode ? ent->hard_port_no : port_no; - ap->pio_mask = ent->pio_mask; - ap->mwdma_mask = ent->mwdma_mask; - ap->udma_mask = ent->udma_mask; - ap->flags |= ent->host_flags; - ap->ops = ent->port_ops; - ap->hw_sata_spd_limit = UINT_MAX; - ap->active_tag = ATA_TAG_POISON; - ap->last_ctl = 0xFF; - -#if defined(ATA_VERBOSE_DEBUG) - /* turn on all debugging levels */ - ap->msg_enable = 0x00FF; -#elif defined(ATA_DEBUG) - ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; -#else - ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; -#endif - - INIT_WORK(&ap->port_task, NULL, NULL); - INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); - INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan, ap); - INIT_LIST_HEAD(&ap->eh_done_q); - init_waitqueue_head(&ap->eh_wait_q); - - /* set cable type */ - ap->cbl = ATA_CBL_NONE; - if (ap->flags & ATA_FLAG_SATA) - ap->cbl = ATA_CBL_SATA; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - dev->ap = ap; - dev->devno = i; - ata_dev_init(dev); - } - -#ifdef ATA_IRQ_TRAP - ap->stats.unhandled_irq = 1; - ap->stats.idle_irq = 1; -#endif - - memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports)); -} - -/** - * ata_host_add - Attach low-level ATA driver to system - * @ent: Information provided by low-level driver - * @host_set: Collections of ports to which we add - * @port_no: Port number associated with this host - * - * Attach low-level ATA driver to system. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * New ata_port on success, for NULL on error. - */ - -static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, - struct ata_host_set *host_set, - unsigned int port_no) -{ - struct Scsi_Host *host; - struct ata_port *ap; - int rc; - - DPRINTK("ENTER\n"); - - if (!ent->port_ops->error_handler && - !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { - printk(KERN_ERR "ata%u: no reset mechanism available\n", - port_no); - return NULL; - } - - host = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); - if (!host) - return NULL; - - host->transportt = &ata_scsi_transport_template; - - ap = ata_shost_to_port(host); - - ata_host_init(ap, host, host_set, ent, port_no); - - rc = ap->ops->port_start(ap); - if (rc) - goto err_out; - - return ap; - -err_out: - scsi_host_put(host); - return NULL; -} - -/** - * ata_device_add - Register hardware device with ATA and SCSI layers - * @ent: Probe information describing hardware device to be registered - * - * This function processes the information provided in the probe - * information struct @ent, allocates the necessary ATA and SCSI - * host information structures, initializes them, and registers - * everything with requisite kernel subsystems. - * - * This function requests irqs, probes the ATA bus, and probes - * the SCSI bus. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Number of ports registered. Zero on error (no ports registered). - */ -int ata_device_add(const struct ata_probe_ent *ent) -{ - unsigned int count = 0, i; - struct device *dev = ent->dev; - struct ata_host_set *host_set; - int rc; - - DPRINTK("ENTER\n"); - /* alloc a container for our list of ATA ports (buses) */ - host_set = kzalloc(sizeof(struct ata_host_set) + - (ent->n_ports * sizeof(void *)), GFP_KERNEL); - if (!host_set) - return 0; - spin_lock_init(&host_set->lock); - - host_set->dev = dev; - host_set->n_ports = ent->n_ports; - host_set->irq = ent->irq; - host_set->mmio_base = ent->mmio_base; - host_set->private_data = ent->private_data; - host_set->ops = ent->port_ops; - host_set->flags = ent->host_set_flags; - - /* register each port bound to this device */ - for (i = 0; i < ent->n_ports; i++) { - struct ata_port *ap; - unsigned long xfer_mode_mask; - - ap = ata_host_add(ent, host_set, i); - if (!ap) - goto err_out; - - host_set->ports[i] = ap; - xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | - (ap->mwdma_mask << ATA_SHIFT_MWDMA) | - (ap->pio_mask << ATA_SHIFT_PIO); - - /* print per-port info to dmesg */ - ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " - "ctl 0x%lX bmdma 0x%lX irq %lu\n", - ap->flags & ATA_FLAG_SATA ? 'S' : 'P', - ata_mode_string(xfer_mode_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - ent->irq); - - ata_chk_status(ap); - host_set->ops->irq_clear(ap); - ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ - count++; - } - - if (!count) - goto err_free_ret; - - /* obtain irq, that is shared between channels */ - rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set); - if (rc) { - dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", - ent->irq, rc); - goto err_out; - } - - /* perform each probe synchronously */ - DPRINTK("probe begin\n"); - for (i = 0; i < count; i++) { - struct ata_port *ap; - u32 scontrol; - int rc; - - ap = host_set->ports[i]; - - /* init sata_spd_limit to the current value */ - if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { - int spd = (scontrol >> 4) & 0xf; - ap->hw_sata_spd_limit &= (1 << spd) - 1; - } - ap->sata_spd_limit = ap->hw_sata_spd_limit; - - rc = scsi_add_host(ap->host, dev); - if (rc) { - ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); - /* FIXME: do something useful here */ - /* FIXME: handle unconditional calls to - * scsi_scan_host and ata_host_remove, below, - * at the very least - */ - } - - if (ap->ops->error_handler) { - struct ata_eh_info *ehi = &ap->eh_info; - unsigned long flags; - - ata_port_probe(ap); - - /* kick EH for boot probing */ - spin_lock_irqsave(ap->lock, flags); - - ehi->probe_mask = (1 << ATA_MAX_DEVICES) - 1; - ehi->action |= ATA_EH_SOFTRESET; - ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; - - ap->pflags |= ATA_PFLAG_LOADING; - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - /* wait for EH to finish */ - ata_port_wait_eh(ap); - } else { - DPRINTK("ata%u: bus probe begin\n", ap->id); - rc = ata_bus_probe(ap); - DPRINTK("ata%u: bus probe end\n", ap->id); - - if (rc) { - /* FIXME: do something useful here? - * Current libata behavior will - * tear down everything when - * the module is removed - * or the h/w is unplugged. - */ - } - } - } - - /* probes are done, now scan each port's disk(s) */ - DPRINTK("host probe begin\n"); - for (i = 0; i < count; i++) { - struct ata_port *ap = host_set->ports[i]; - - ata_scsi_scan_host(ap); - } - - dev_set_drvdata(dev, host_set); - - VPRINTK("EXIT, returning %u\n", ent->n_ports); - return ent->n_ports; /* success */ - -err_out: - for (i = 0; i < count; i++) { - struct ata_port *ap = host_set->ports[i]; - if (ap) { - ap->ops->port_stop(ap); - scsi_host_put(ap->host); - } - } -err_free_ret: - kfree(host_set); - VPRINTK("EXIT, returning 0\n"); - return 0; -} - -/** - * ata_port_detach - Detach ATA port in prepration of device removal - * @ap: ATA port to be detached - * - * Detach all ATA devices and the associated SCSI devices of @ap; - * then, remove the associated SCSI host. @ap is guaranteed to - * be quiescent on return from this function. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_port_detach(struct ata_port *ap) -{ - unsigned long flags; - int i; - - if (!ap->ops->error_handler) - goto skip_eh; - - /* tell EH we're leaving & flush EH */ - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_UNLOADING; - spin_unlock_irqrestore(ap->lock, flags); - - ata_port_wait_eh(ap); - - /* EH is now guaranteed to see UNLOADING, so no new device - * will be attached. Disable all existing devices. - */ - spin_lock_irqsave(ap->lock, flags); - - for (i = 0; i < ATA_MAX_DEVICES; i++) - ata_dev_disable(&ap->device[i]); - - spin_unlock_irqrestore(ap->lock, flags); - - /* Final freeze & EH. All in-flight commands are aborted. EH - * will be skipped and retrials will be terminated with bad - * target. - */ - spin_lock_irqsave(ap->lock, flags); - ata_port_freeze(ap); /* won't be thawed */ - spin_unlock_irqrestore(ap->lock, flags); - - ata_port_wait_eh(ap); - - /* Flush hotplug task. The sequence is similar to - * ata_port_flush_task(). - */ - flush_workqueue(ata_aux_wq); - cancel_delayed_work(&ap->hotplug_task); - flush_workqueue(ata_aux_wq); - - skip_eh: - /* remove the associated SCSI host */ - scsi_remove_host(ap->host); -} - -/** - * ata_host_set_remove - PCI layer callback for device removal - * @host_set: ATA host set that was removed - * - * Unregister all objects associated with this host set. Free those - * objects. - * - * LOCKING: - * Inherited from calling layer (may sleep). - */ - -void ata_host_set_remove(struct ata_host_set *host_set) -{ - unsigned int i; - - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); - - free_irq(host_set->irq, host_set); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - ata_scsi_release(ap->host); - - if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) { - struct ata_ioports *ioaddr = &ap->ioaddr; - - if (ioaddr->cmd_addr == 0x1f0) - release_region(0x1f0, 8); - else if (ioaddr->cmd_addr == 0x170) - release_region(0x170, 8); - } - - scsi_host_put(ap->host); - } - - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); - - kfree(host_set); -} - -/** - * ata_scsi_release - SCSI layer callback hook for host unload - * @host: libata host to be unloaded - * - * Performs all duties necessary to shut down a libata port... - * Kill port kthread, disable port, and release resources. - * - * LOCKING: - * Inherited from SCSI layer. - * - * RETURNS: - * One. - */ - -int ata_scsi_release(struct Scsi_Host *host) -{ - struct ata_port *ap = ata_shost_to_port(host); - - DPRINTK("ENTER\n"); - - ap->ops->port_disable(ap); - ap->ops->port_stop(ap); - - DPRINTK("EXIT\n"); - return 1; -} - -/** - * ata_std_ports - initialize ioaddr with standard port offsets. - * @ioaddr: IO address structure to be initialized - * - * Utility function which initializes data_addr, error_addr, - * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, - * device_addr, status_addr, and command_addr to standard offsets - * relative to cmd_addr. - * - * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. - */ - -void ata_std_ports(struct ata_ioports *ioaddr) -{ - ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; -} - - -#ifdef CONFIG_PCI - -void ata_pci_host_stop (struct ata_host_set *host_set) -{ - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - pci_iounmap(pdev, host_set->mmio_base); -} - -/** - * ata_pci_remove_one - PCI layer callback for device removal - * @pdev: PCI device that was removed - * - * PCI layer indicates to libata via this hook that - * hot-unplug or module unload event has occurred. - * Handle this by unregistering all objects associated - * with this PCI device. Free those objects. Then finally - * release PCI resources and disable device. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - */ - -void ata_pci_remove_one (struct pci_dev *pdev) -{ - struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); - struct ata_host_set *host_set2 = host_set->next; - - ata_host_set_remove(host_set); - if (host_set2) - ata_host_set_remove(host_set2); - - pci_release_regions(pdev); - pci_disable_device(pdev); - dev_set_drvdata(dev, NULL); -} - -/* move to PCI subsystem */ -int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) -{ - unsigned long tmp = 0; - - switch (bits->width) { - case 1: { - u8 tmp8 = 0; - pci_read_config_byte(pdev, bits->reg, &tmp8); - tmp = tmp8; - break; - } - case 2: { - u16 tmp16 = 0; - pci_read_config_word(pdev, bits->reg, &tmp16); - tmp = tmp16; - break; - } - case 4: { - u32 tmp32 = 0; - pci_read_config_dword(pdev, bits->reg, &tmp32); - tmp = tmp32; - break; - } - - default: - return -EINVAL; - } - - tmp &= bits->mask; - - return (tmp == bits->val) ? 1 : 0; -} - -void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state) -{ - pci_save_state(pdev); - - if (state.event == PM_EVENT_SUSPEND) { - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - } -} - -void ata_pci_device_do_resume(struct pci_dev *pdev) -{ - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_enable_device(pdev); - pci_set_master(pdev); -} - -int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - int rc = 0; - - rc = ata_host_set_suspend(host_set, state); - if (rc) - return rc; - - if (host_set->next) { - rc = ata_host_set_suspend(host_set->next, state); - if (rc) { - ata_host_set_resume(host_set); - return rc; - } - } - - ata_pci_device_do_suspend(pdev, state); - - return 0; -} - -int ata_pci_device_resume(struct pci_dev *pdev) -{ - struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); - - ata_pci_device_do_resume(pdev); - ata_host_set_resume(host_set); - if (host_set->next) - ata_host_set_resume(host_set->next); - - return 0; -} -#endif /* CONFIG_PCI */ - - -static int __init ata_init(void) -{ - ata_probe_timeout *= HZ; - ata_wq = create_workqueue("ata"); - if (!ata_wq) - return -ENOMEM; - - ata_aux_wq = create_singlethread_workqueue("ata_aux"); - if (!ata_aux_wq) { - destroy_workqueue(ata_wq); - return -ENOMEM; - } - - printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); - return 0; -} - -static void __exit ata_exit(void) -{ - destroy_workqueue(ata_wq); - destroy_workqueue(ata_aux_wq); -} - -module_init(ata_init); -module_exit(ata_exit); - -static unsigned long ratelimit_time; -static DEFINE_SPINLOCK(ata_ratelimit_lock); - -int ata_ratelimit(void) -{ - int rc; - unsigned long flags; - - spin_lock_irqsave(&ata_ratelimit_lock, flags); - - if (time_after(jiffies, ratelimit_time)) { - rc = 1; - ratelimit_time = jiffies + (HZ/5); - } else - rc = 0; - - spin_unlock_irqrestore(&ata_ratelimit_lock, flags); - - return rc; -} - -/** - * ata_wait_register - wait until register value changes - * @reg: IO-mapped register - * @mask: Mask to apply to read register value - * @val: Wait condition - * @interval_msec: polling interval in milliseconds - * @timeout_msec: timeout in milliseconds - * - * Waiting for some bits of register to change is a common - * operation for ATA controllers. This function reads 32bit LE - * IO-mapped register @reg and tests for the following condition. - * - * (*@reg & mask) != val - * - * If the condition is met, it returns; otherwise, the process is - * repeated after @interval_msec until timeout. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * The final register value. - */ -u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec) -{ - unsigned long timeout; - u32 tmp; - - tmp = ioread32(reg); - - /* Calculate timeout _after_ the first read to make sure - * preceding writes reach the controller before starting to - * eat away the timeout. - */ - timeout = jiffies + (timeout_msec * HZ) / 1000; - - while ((tmp & mask) == val && time_before(jiffies, timeout)) { - msleep(interval_msec); - tmp = ioread32(reg); - } - - return tmp; -} - -/* - * libata is essentially a library of internal helper functions for - * low-level ATA host controller drivers. As such, the API/ABI is - * likely to change as new drivers are added and updated. - * Do not depend on ABI/API stability. - */ - -EXPORT_SYMBOL_GPL(sata_deb_timing_normal); -EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); -EXPORT_SYMBOL_GPL(sata_deb_timing_long); -EXPORT_SYMBOL_GPL(ata_std_bios_param); -EXPORT_SYMBOL_GPL(ata_std_ports); -EXPORT_SYMBOL_GPL(ata_device_add); -EXPORT_SYMBOL_GPL(ata_port_detach); -EXPORT_SYMBOL_GPL(ata_host_set_remove); -EXPORT_SYMBOL_GPL(ata_sg_init); -EXPORT_SYMBOL_GPL(ata_sg_init_one); -EXPORT_SYMBOL_GPL(ata_hsm_move); -EXPORT_SYMBOL_GPL(ata_qc_complete); -EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); -EXPORT_SYMBOL_GPL(ata_qc_issue_prot); -EXPORT_SYMBOL_GPL(ata_tf_load); -EXPORT_SYMBOL_GPL(ata_tf_read); -EXPORT_SYMBOL_GPL(ata_noop_dev_select); -EXPORT_SYMBOL_GPL(ata_std_dev_select); -EXPORT_SYMBOL_GPL(ata_tf_to_fis); -EXPORT_SYMBOL_GPL(ata_tf_from_fis); -EXPORT_SYMBOL_GPL(ata_check_status); -EXPORT_SYMBOL_GPL(ata_altstatus); -EXPORT_SYMBOL_GPL(ata_exec_command); -EXPORT_SYMBOL_GPL(ata_port_start); -EXPORT_SYMBOL_GPL(ata_port_stop); -EXPORT_SYMBOL_GPL(ata_host_stop); -EXPORT_SYMBOL_GPL(ata_interrupt); -EXPORT_SYMBOL_GPL(ata_mmio_data_xfer); -EXPORT_SYMBOL_GPL(ata_pio_data_xfer); -EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq); -EXPORT_SYMBOL_GPL(ata_qc_prep); -EXPORT_SYMBOL_GPL(ata_noop_qc_prep); -EXPORT_SYMBOL_GPL(ata_bmdma_setup); -EXPORT_SYMBOL_GPL(ata_bmdma_start); -EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); -EXPORT_SYMBOL_GPL(ata_bmdma_status); -EXPORT_SYMBOL_GPL(ata_bmdma_stop); -EXPORT_SYMBOL_GPL(ata_bmdma_freeze); -EXPORT_SYMBOL_GPL(ata_bmdma_thaw); -EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); -EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); -EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); -EXPORT_SYMBOL_GPL(ata_port_probe); -EXPORT_SYMBOL_GPL(sata_set_spd); -EXPORT_SYMBOL_GPL(sata_phy_debounce); -EXPORT_SYMBOL_GPL(sata_phy_resume); -EXPORT_SYMBOL_GPL(sata_phy_reset); -EXPORT_SYMBOL_GPL(__sata_phy_reset); -EXPORT_SYMBOL_GPL(ata_bus_reset); -EXPORT_SYMBOL_GPL(ata_std_prereset); -EXPORT_SYMBOL_GPL(ata_std_softreset); -EXPORT_SYMBOL_GPL(sata_std_hardreset); -EXPORT_SYMBOL_GPL(ata_std_postreset); -EXPORT_SYMBOL_GPL(ata_dev_revalidate); -EXPORT_SYMBOL_GPL(ata_dev_classify); -EXPORT_SYMBOL_GPL(ata_dev_pair); -EXPORT_SYMBOL_GPL(ata_port_disable); -EXPORT_SYMBOL_GPL(ata_ratelimit); -EXPORT_SYMBOL_GPL(ata_wait_register); -EXPORT_SYMBOL_GPL(ata_busy_sleep); -EXPORT_SYMBOL_GPL(ata_port_queue_task); -EXPORT_SYMBOL_GPL(ata_scsi_ioctl); -EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); -EXPORT_SYMBOL_GPL(ata_scsi_slave_config); -EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); -EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); -EXPORT_SYMBOL_GPL(ata_scsi_release); -EXPORT_SYMBOL_GPL(ata_host_intr); -EXPORT_SYMBOL_GPL(sata_scr_valid); -EXPORT_SYMBOL_GPL(sata_scr_read); -EXPORT_SYMBOL_GPL(sata_scr_write); -EXPORT_SYMBOL_GPL(sata_scr_write_flush); -EXPORT_SYMBOL_GPL(ata_port_online); -EXPORT_SYMBOL_GPL(ata_port_offline); -EXPORT_SYMBOL_GPL(ata_host_set_suspend); -EXPORT_SYMBOL_GPL(ata_host_set_resume); -EXPORT_SYMBOL_GPL(ata_id_string); -EXPORT_SYMBOL_GPL(ata_id_c_string); -EXPORT_SYMBOL_GPL(ata_scsi_simulate); - -EXPORT_SYMBOL_GPL(ata_pio_need_iordy); -EXPORT_SYMBOL_GPL(ata_timing_compute); -EXPORT_SYMBOL_GPL(ata_timing_merge); - -#ifdef CONFIG_PCI -EXPORT_SYMBOL_GPL(pci_test_config_bits); -EXPORT_SYMBOL_GPL(ata_pci_host_stop); -EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); -EXPORT_SYMBOL_GPL(ata_pci_init_one); -EXPORT_SYMBOL_GPL(ata_pci_remove_one); -EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); -EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); -EXPORT_SYMBOL_GPL(ata_pci_device_suspend); -EXPORT_SYMBOL_GPL(ata_pci_device_resume); -EXPORT_SYMBOL_GPL(ata_pci_default_filter); -EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); -#endif /* CONFIG_PCI */ - -EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); -EXPORT_SYMBOL_GPL(ata_scsi_device_resume); - -EXPORT_SYMBOL_GPL(ata_eng_timeout); -EXPORT_SYMBOL_GPL(ata_port_schedule_eh); -EXPORT_SYMBOL_GPL(ata_port_abort); -EXPORT_SYMBOL_GPL(ata_port_freeze); -EXPORT_SYMBOL_GPL(ata_eh_freeze_port); -EXPORT_SYMBOL_GPL(ata_eh_thaw_port); -EXPORT_SYMBOL_GPL(ata_eh_qc_complete); -EXPORT_SYMBOL_GPL(ata_eh_qc_retry); -EXPORT_SYMBOL_GPL(ata_do_eh); |