aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/qla2xxx/qla_gbl.h9
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c973
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c1
3 files changed, 848 insertions, 135 deletions
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index d153d543a67..fcb42f56b5e 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -35,13 +35,22 @@ extern int qla2x00_initialize_adapter(scsi_qla_host_t *);
extern int qla2100_pci_config(struct scsi_qla_host *);
extern int qla2300_pci_config(struct scsi_qla_host *);
+extern int qla24xx_pci_config(scsi_qla_host_t *);
extern void qla2x00_reset_chip(struct scsi_qla_host *);
+extern void qla24xx_reset_chip(struct scsi_qla_host *);
extern int qla2x00_chip_diag(struct scsi_qla_host *);
+extern int qla24xx_chip_diag(struct scsi_qla_host *);
extern void qla2x00_config_rings(struct scsi_qla_host *);
+extern void qla24xx_config_rings(struct scsi_qla_host *);
extern void qla2x00_reset_adapter(struct scsi_qla_host *);
+extern void qla24xx_reset_adapter(struct scsi_qla_host *);
extern int qla2x00_nvram_config(struct scsi_qla_host *);
+extern int qla24xx_nvram_config(struct scsi_qla_host *);
extern void qla2x00_update_fw_options(struct scsi_qla_host *);
+extern void qla24xx_update_fw_options(scsi_qla_host_t *);
extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
+extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *);
+extern int qla24xx_load_risc_hotplug(scsi_qla_host_t *, uint32_t *);
extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, int);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b0419661981..786f2648114 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -19,6 +19,8 @@
#include "qla_def.h"
#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/firmware.h>
#include <scsi/scsi_transport_fc.h>
#include "qla_devtbl.h"
@@ -87,6 +89,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
ha->isp_abort_cnt = 0;
ha->beacon_blink_led = 0;
+ qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
rval = ha->isp_ops.pci_config(ha);
if (rval) {
DEBUG2(printk("scsi(%ld): Unable to configure PCI space=n",
@@ -97,6 +100,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
ha->isp_ops.reset_chip(ha);
qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
+
ha->isp_ops.nvram_config(ha);
qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
@@ -129,6 +133,9 @@ check_fw_ready_again:
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+
/*
* Wait at most MAX_TARGET RSCNs for a stable
* link.
@@ -172,7 +179,6 @@ check_fw_ready_again:
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
- ha->marker_needed = 1;
qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
ha->marker_needed = 0;
@@ -197,8 +203,6 @@ qla2100_pci_config(scsi_qla_host_t *ha)
unsigned long flags;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
-
pci_set_master(ha->pdev);
mwi = 0;
if (pci_set_mwi(ha->pdev))
@@ -236,8 +240,6 @@ qla2300_pci_config(scsi_qla_host_t *ha)
uint32_t cnt;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
-
pci_set_master(ha->pdev);
mwi = 0;
if (pci_set_mwi(ha->pdev))
@@ -312,6 +314,70 @@ qla2300_pci_config(scsi_qla_host_t *ha)
}
/**
+ * qla24xx_pci_config() - Setup ISP24xx PCI configuration registers.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+int
+qla24xx_pci_config(scsi_qla_host_t *ha)
+{
+ uint16_t w, mwi;
+ unsigned long flags = 0;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ int pcix_cmd_reg, pcie_dctl_reg;
+
+ pci_set_master(ha->pdev);
+ mwi = 0;
+ if (pci_set_mwi(ha->pdev))
+ mwi = PCI_COMMAND_INVALIDATE;
+ pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->revision);
+
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
+ w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ w &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(ha->pdev, PCI_COMMAND, w);
+
+ pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
+
+ /* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
+ pcix_cmd_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX);
+ if (pcix_cmd_reg) {
+ uint16_t pcix_cmd;
+
+ pcix_cmd_reg += PCI_X_CMD;
+ pci_read_config_word(ha->pdev, pcix_cmd_reg, &pcix_cmd);
+ pcix_cmd &= ~PCI_X_CMD_MAX_READ;
+ pcix_cmd |= 0x0008;
+ pci_write_config_word(ha->pdev, pcix_cmd_reg, pcix_cmd);
+ }
+
+ /* PCIe -- adjust Maximum Read Request Size (2048). */
+ pcie_dctl_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ if (pcie_dctl_reg) {
+ uint16_t pcie_dctl;
+
+ pcie_dctl_reg += PCI_EXP_DEVCTL;
+ pci_read_config_word(ha->pdev, pcie_dctl_reg, &pcie_dctl);
+ pcie_dctl &= ~PCI_EXP_DEVCTL_READRQ;
+ pcie_dctl |= 0x4000;
+ pci_write_config_word(ha->pdev, pcie_dctl_reg, pcie_dctl);
+ }
+
+ /* Reset expansion ROM address decode enable */
+ pci_read_config_word(ha->pdev, PCI_ROM_ADDRESS, &w);
+ w &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_word(ha->pdev, PCI_ROM_ADDRESS, w);
+
+ /* Get PCI bus information. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->pci_attr = RD_REG_DWORD(&reg->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ return QLA_SUCCESS;
+}
+
+/**
* qla2x00_isp_firmware() - Choose firmware image.
* @ha: HA context
*
@@ -498,6 +564,61 @@ qla2x00_reset_chip(scsi_qla_host_t *ha)
}
/**
+ * qla24xx_reset_chip() - Reset ISP24xx chip.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+void
+qla24xx_reset_chip(scsi_qla_host_t *ha)
+{
+ unsigned long flags = 0;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ uint32_t cnt, d2;
+
+ ha->isp_ops.disable_intrs(ha);
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ /* Reset RISC. */
+ WRT_REG_DWORD(&reg->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE) == 0)
+ break;
+
+ udelay(10);
+ }
+
+ WRT_REG_DWORD(&reg->ctrl_status,
+ CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ udelay(20);
+ d2 = RD_REG_DWORD(&reg->ctrl_status);
+ for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
+ udelay(5);
+ d2 = RD_REG_DWORD(&reg->ctrl_status);
+ barrier();
+ }
+
+ WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
+ RD_REG_DWORD(&reg->hccr);
+
+ WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
+ RD_REG_DWORD(&reg->hccr);
+
+ WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_RESET);
+ RD_REG_DWORD(&reg->hccr);
+
+ d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
+ for (cnt = 6000000 ; cnt && d2; cnt--) {
+ udelay(5);
+ d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
+ barrier();
+ }
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+/**
* qla2x00_chip_diag() - Test chip for proper operation.
* @ha: HA context
*
@@ -623,6 +744,91 @@ chip_diag_failed:
}
/**
+ * qla24xx_chip_diag() - Test ISP24xx for proper operation.
+ * @ha: HA context
+ *
+ * Returns 0 on success.
+ */
+int
+qla24xx_chip_diag(scsi_qla_host_t *ha)
+{
+ int rval;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ unsigned long flags = 0;
+ uint32_t cnt, d2;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ /* Reset RISC. */
+ WRT_REG_DWORD(&reg->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_DWORD(&reg->ctrl_status) &
+ CSRX_DMA_ACTIVE) == 0)
+ break;
+
+ udelay(10);
+ }
+
+ WRT_REG_DWORD(&reg->ctrl_status,
+ CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ udelay(20);
+ d2 = RD_REG_DWORD(&reg->ctrl_status);
+ for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
+ udelay(5);
+ d2 = RD_REG_DWORD(&reg->ctrl_status);
+ barrier();
+ }
+
+ WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
+ RD_REG_DWORD(&reg->hccr);
+
+ WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
+ RD_REG_DWORD(&reg->hccr);
+
+ WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_RESET);
+ RD_REG_DWORD(&reg->hccr);
+
+ d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
+ for (cnt = 6000000 ; cnt && d2; cnt--) {
+ udelay(5);
+ d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
+ barrier();
+ }
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
+
+ rval = qla2x00_mbx_reg_test(ha);
+ if (rval) {
+ DEBUG(printk("scsi(%ld): Failed mailbox send register test\n",
+ ha->host_no));
+ qla_printk(KERN_WARNING, ha,
+ "Failed mailbox send register test\n");
+ } else {
+ /* Flag a successful rval */
+ rval = QLA_SUCCESS;
+ }
+
+ return rval;
+}
+
+static void
+qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
+{
+ ha->fw_dumped = 0;
+ ha->fw_dump24_len = sizeof(struct qla24xx_fw_dump);
+ ha->fw_dump24_len += (ha->fw_memory_size - 0x100000) * sizeof(uint32_t);
+ ha->fw_dump24 = vmalloc(ha->fw_dump24_len);
+ if (ha->fw_dump24)
+ qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware "
+ "dump...\n", ha->fw_dump24_len / 1024);
+ else
+ qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
+ "firmware dump!!!\n", ha->fw_dump24_len / 1024);
+}
+
+/**
* qla2x00_resize_request_q() - Resize request queue given available ISP memory.
* @ha: HA context
*
@@ -641,6 +847,9 @@ qla2x00_resize_request_q(scsi_qla_host_t *ha)
if (IS_QLA2100(ha) || IS_QLA2200(ha))
return;
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ qla2x00_alloc_fw_dump(ha);
+
/* Retrieve IOCB counts available to the firmware. */
rval = qla2x00_get_resource_cnts(ha, NULL, NULL, NULL, &fw_iocb_cnt);
if (rval)
@@ -684,91 +893,22 @@ qla2x00_resize_request_q(scsi_qla_host_t *ha)
static int
qla2x00_setup_chip(scsi_qla_host_t *ha)
{
- int rval;
- uint16_t cnt;
- uint16_t *risc_code;
- unsigned long risc_address;
- unsigned long risc_code_size;
- int num;
- int i;
- uint16_t *req_ring;
- struct qla_fw_info *fw_iter;
-
- rval = QLA_SUCCESS;
+ int rval;
+ uint32_t srisc_address = 0;
/* Load firmware sequences */
- fw_iter = ha->brd_info->fw_info;
- while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
- risc_code = fw_iter->fwcode;
- risc_code_size = *fw_iter->fwlen;
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- risc_address = *fw_iter->fwstart;
- } else {
- /* Extended address */
- risc_address = *fw_iter->lfwstart;
- }
-
- num = 0;
- rval = 0;
- while (risc_code_size > 0 && !rval) {
- cnt = (uint16_t)(ha->fw_transfer_size >> 1);
- if (cnt > risc_code_size)
- cnt = risc_code_size;
-
- DEBUG7(printk("scsi(%ld): Loading risc segment@ "
- "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
- ha->host_no, risc_code, cnt, risc_address));
-
- req_ring = (uint16_t *)ha->request_ring;
- for (i = 0; i < cnt; i++)
- req_ring[i] = cpu_to_le16(risc_code[i]);
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- rval = qla2x00_load_ram(ha,
- ha->request_dma, risc_address, cnt);
- } else {
- rval = qla2x00_load_ram_ext(ha,
- ha->request_dma, risc_address, cnt);
- }
- if (rval) {
- DEBUG(printk("scsi(%ld): [ERROR] Failed to "
- "load segment %d of firmware\n",
- ha->host_no, num));
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to load "
- "segment %d of firmware\n", num);
-
- qla2x00_dump_regs(ha);
- break;
- }
-
- risc_code += cnt;
- risc_address += cnt;
- risc_code_size -= cnt;
- num++;
- }
-
- /* Next firmware sequence */
- fw_iter++;
- }
-
- /* Verify checksum of loaded RISC code. */
- if (!rval) {
+ rval = ha->isp_ops.load_risc(ha, &srisc_address);
+ if (rval == QLA_SUCCESS) {
DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC "
"code.\n", ha->host_no));
- rval = qla2x00_verify_checksum(ha,
- IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RISC_SADDRESS :
- *ha->brd_info->fw_info[0].fwstart);
+ rval = qla2x00_verify_checksum(ha, srisc_address);
if (rval == QLA_SUCCESS) {
/* Start firmware execution. */
DEBUG(printk("scsi(%ld): Checksum OK, start "
"firmware.\n", ha->host_no));
- rval = qla2x00_execute_fw(ha,
- IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RISC_SADDRESS :
- *ha->brd_info->fw_info[0].fwstart);
+ rval = qla2x00_execute_fw(ha, srisc_address);
/* Retrieve firmware information. */
if (rval == QLA_SUCCESS && ha->fw_major_version == 0) {
qla2x00_get_fw_version(ha,
@@ -893,6 +1033,23 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha)
}
void
+qla24xx_update_fw_options(scsi_qla_host_t *ha)
+{
+ int rval;
+
+ /* Update Serial Link options. */
+ if ((ha->fw_seriallink_options24[0] & BIT_0) == 0)
+ return;
+
+ rval = qla2x00_set_serdes_params(ha, ha->fw_seriallink_options24[1],
+ ha->fw_seriallink_options24[2], ha->fw_seriallink_options24[3]);
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to update Serial Link options (%x).\n", rval);
+ }
+}
+
+void
qla2x00_config_rings(struct scsi_qla_host *ha)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
@@ -914,6 +1071,30 @@ qla2x00_config_rings(struct scsi_qla_host *ha)
RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */
}
+void
+qla24xx_config_rings(struct scsi_qla_host *ha)
+{
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ struct init_cb_24xx *icb;
+
+ /* Setup ring parameters in initialization control block. */
+ icb = (struct init_cb_24xx *)ha->init_cb;
+ icb->request_q_outpointer = __constant_cpu_to_le16(0);
+ icb->response_q_inpointer = __constant_cpu_to_le16(0);
+ icb->request_q_length = cpu_to_le16(ha->request_q_length);
+ icb->response_q_length = cpu_to_le16(ha->response_q_length);
+ icb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
+ icb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
+ icb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma));
+ icb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma));
+
+ WRT_REG_DWORD(&reg->req_q_in, 0);
+ WRT_REG_DWORD(&reg->req_q_out, 0);
+ WRT_REG_DWORD(&reg->rsp_q_in, 0);
+ WRT_REG_DWORD(&reg->rsp_q_out, 0);
+ RD_REG_DWORD(&reg->rsp_q_out);
+}
+
/**
* qla2x00_init_rings() - Initializes firmware.
* @ha: HA context
@@ -960,7 +1141,7 @@ qla2x00_init_rings(scsi_qla_host_t *ha)
ha->isp_ops.update_fw_options(ha);
DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no));
- rval = qla2x00_init_firmware(ha, sizeof(init_cb_t));
+ rval = qla2x00_init_firmware(ha, ha->init_cb_size);
if (rval) {
DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n",
ha->host_no));
@@ -1195,38 +1376,33 @@ qla2x00_configure_hba(scsi_qla_host_t *ha)
int
qla2x00_nvram_config(scsi_qla_host_t *ha)
{
- int rval;
- uint8_t chksum = 0;
- uint16_t cnt;
- uint8_t *dptr1, *dptr2;
- init_cb_t *icb = ha->init_cb;
- nvram_t *nv = (nvram_t *)ha->request_ring;
- uint16_t *wptr = (uint16_t *)ha->request_ring;
+ int rval;
+ uint8_t chksum = 0;
+ uint16_t cnt;
+ uint8_t *dptr1, *dptr2;
+ init_cb_t *icb = ha->init_cb;
+ nvram_t *nv = (nvram_t *)ha->request_ring;
+ uint8_t *ptr = (uint8_t *)ha->request_ring;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- uint8_t timer_mode;
+ uint8_t timer_mode;
rval = QLA_SUCCESS;
/* Determine NVRAM starting address. */
+ ha->nvram_size = sizeof(nvram_t);
ha->nvram_base = 0;
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha))
if ((RD_REG_WORD(&reg->ctrl_status) >> 14) == 1)
ha->nvram_base = 0x80;
/* Get NVRAM data and calculate checksum. */
- qla2x00_lock_nvram_access(ha);
- for (cnt = 0; cnt < sizeof(nvram_t)/2; cnt++) {
- *wptr = cpu_to_le16(qla2x00_get_nvram_word(ha,
- (cnt+ha->nvram_base)));
- chksum += (uint8_t)*wptr;
- chksum += (uint8_t)(*wptr >> 8);
- wptr++;
- }
- qla2x00_unlock_nvram_access(ha);
+ ha->isp_ops.read_nvram(ha, ptr, ha->nvram_base, ha->nvram_size);
+ for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
+ chksum += *ptr++;
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
- sizeof(nvram_t)));
+ ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
@@ -1241,7 +1417,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
/*
* Set default initialization control block.
*/
- memset(nv, 0, sizeof(nvram_t));
+ memset(nv, 0, ha->nvram_size);
nv->parameter_block_version = ICB_VERSION;
if (IS_QLA23XX(ha)) {
@@ -1301,7 +1477,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
#endif
/* Reset Initialization control block */
- memset(icb, 0, sizeof(init_cb_t));
+ memset(icb, 0, ha->init_cb_size);
/*
* Setup driver NVRAM options.
@@ -1314,6 +1490,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
if (IS_QLA23XX(ha)) {
nv->firmware_options[0] |= BIT_2;
nv->firmware_options[0] &= ~BIT_3;
+ nv->add_firmware_options[1] |= BIT_5 | BIT_4;
if (IS_QLA2300(ha)) {
if (ha->fb_rev == FPM_2310) {
@@ -1941,10 +2118,15 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha)
fc_port_t *fcport, *fcptemp;
uint16_t next_loopid;
uint16_t mb[MAILBOX_REGISTER_COUNT];
+ uint16_t loop_id;
LIST_HEAD(new_fcports);
/* If FL port exists, then SNS is present */
- rval = qla2x00_get_port_name(ha, SNS_FL_PORT, NULL, 0);
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ loop_id = NPH_F_PORT;
+ else
+ loop_id = SNS_FL_PORT;
+ rval = qla2x00_get_port_name(ha, loop_id, NULL, 0);
if (rval != QLA_SUCCESS) {
DEBUG2(printk("scsi(%ld): MBC_GET_PORT_NAME Failed, No FL "
"Port\n", ha->host_no));
@@ -1961,12 +2143,16 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha)
}
do {
/* Ensure we are logged into the SNS. */
- ha->isp_ops.fabric_login(ha, SIMPLE_NAME_SERVER, 0xff, 0xff,
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ loop_id = NPH_SNS;
+ else
+ loop_id = SIMPLE_NAME_SERVER;
+ ha->isp_ops.fabric_login(ha, loop_id, 0xff, 0xff,
0xfc, mb, BIT_1 | BIT_0);
if (mb[0] != MBS_COMMAND_COMPLETE) {
DEBUG2(qla_printk(KERN_INFO, ha,
"Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
- "mb[2]=%x mb[6]=%x mb[7]=%x\n", SIMPLE_NAME_SERVER,
+ "mb[2]=%x mb[6]=%x mb[7]=%x\n", loop_id,
mb[0], mb[1], mb[2], mb[6], mb[7]));
return (QLA_SUCCESS);
}
@@ -2050,7 +2236,6 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha)
break;
}
}
-
/* Login and update database */
qla2x00_fabric_dev_login(ha, fcport, &next_loopid);
}
@@ -2164,7 +2349,6 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
/* Starting free loop ID. */
loop_id = ha->min_external_loopid;
-
for (; loop_id <= ha->last_loop_id; loop_id++) {
if (qla2x00_is_reserved_id(ha, loop_id))
continue;
@@ -2450,6 +2634,7 @@ qla2x00_device_resync(scsi_qla_host_t *ha)
case 0:
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) &&
!IS_QLA6312(ha) && !IS_QLA6322(ha) &&
+ !IS_QLA24XX(ha) && !IS_QLA25XX(ha) &&
ha->flags.init_done) {
/* Handle port RSCN via asyncronous IOCBs */
rval2 = qla2x00_handle_port_rscn(ha, rscn_entry,
@@ -2518,17 +2703,24 @@ qla2x00_fabric_dev_login(scsi_qla_host_t *ha, fc_port_t *fcport,
{
int rval;
int retry;
+ uint8_t opts;
rval = QLA_SUCCESS;
retry = 0;
rval = qla2x00_fabric_login(ha, fcport, next_loopid);
if (rval == QLA_SUCCESS) {
- rval = qla2x00_get_port_database(ha, fcport, 0);
+ /* Send an ADISC to tape devices.*/
+ opts = 0;
+ if (fcport->flags & FCF_TAPE_PRESENT)
+ opts |= BIT_1;
+ rval = qla2x00_get_port_database(ha, fcport, opts);
if (rval != QLA_SUCCESS) {
ha->isp_ops.fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
+ qla2x00_mark_device_lost(ha, fcport, 1);
+
} else {
qla2x00_update_fcport(ha, fcport);
}
@@ -2576,10 +2768,10 @@ qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport,
if (mb[0] == MBS_PORT_ID_USED) {
/*
* Device has another loop ID. The firmware team
- * recommends us to perform an implicit login with the
- * specified ID again. The ID we just used is save here
- * so we return with an ID that can be tried by the
- * next login.
+ * recommends the driver perform an implicit login with
+ * the specified ID again. The ID we just used is save
+ * here so we return with an ID that can be tried by
+ * the next login.
*/
retry++;
tmp_loopid = fcport->loop_id;
@@ -2723,14 +2915,11 @@ qla2x00_loop_resync(scsi_qla_host_t *ha)
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
- /* v2.19.05b6 */
atomic_set(&ha->loop_state, LOOP_UPDATE);
- /*
- * Issue marker command only when we are going
- * to start the I/O .
- */
- ha->marker_needed = 1;
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+ ha->marker_needed = 0;
/* Remap devices on Loop. */
clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
@@ -2862,7 +3051,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
} else { /* schedule another ISP abort */
ha->isp_abort_cnt--;
DEBUG(printk("qla%ld: ISP abort - "
- "retry remainning %d\n",
+ "retry remaining %d\n",
ha->host_no, ha->isp_abort_cnt);)
status = 1;
}
@@ -2919,9 +3108,15 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
spin_lock_irqsave(&ha->hardware_lock, flags);
- /* Disable SRAM, Instruction RAM and GP RAM parity. */
- WRT_REG_WORD(&reg->hccr, (HCCR_ENABLE_PARITY + 0x0));
- RD_REG_WORD(&reg->hccr); /* PCI Posting. */
+ if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) {
+ /*
+ * Disable SRAM, Instruction RAM and GP RAM
+ * parity.
+ */
+ WRT_REG_WORD(&reg->hccr,
+ (HCCR_ENABLE_PARITY + 0x0));
+ RD_REG_WORD(&reg->hccr);
+ }
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -2929,16 +3124,21 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
spin_lock_irqsave(&ha->hardware_lock, flags);
- /* Enable proper parity */
- if (IS_QLA2300(ha))
- /* SRAM parity */
- WRT_REG_WORD(&reg->hccr,
- (HCCR_ENABLE_PARITY + 0x1));
- else
- /* SRAM, Instruction RAM and GP RAM parity */
- WRT_REG_WORD(&reg->hccr,
- (HCCR_ENABLE_PARITY + 0x7));
- RD_REG_WORD(&reg->hccr); /* PCI Posting. */
+ if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) {
+ /* Enable proper parity */
+ if (IS_QLA2300(ha))
+ /* SRAM parity */
+ WRT_REG_WORD(&reg->hccr,
+ (HCCR_ENABLE_PARITY + 0x1));
+ else
+ /*
+ * SRAM, Instruction RAM and GP RAM
+ * parity.
+ */
+ WRT_REG_WORD(&reg->hccr,
+ (HCCR_ENABLE_PARITY + 0x7));
+ RD_REG_WORD(&reg->hccr);
+ }
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
@@ -2949,9 +3149,11 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
if (!(status = qla2x00_fw_ready(ha))) {
DEBUG(printk("%s(): Start configure loop, "
- "status = %d\n",
- __func__,
- status);)
+ "status = %d\n", __func__, status);)
+
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+
ha->flags.online = 1;
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
@@ -2992,7 +3194,6 @@ qla2x00_reset_adapter(scsi_qla_host_t *ha)
ha->flags.online = 0;
ha->isp_ops.disable_intrs(ha);
- /* Reset RISC processor. */
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
@@ -3000,3 +3201,505 @@ qla2x00_reset_adapter(scsi_qla_host_t *ha)
RD_REG_WORD(&reg->hccr); /* PCI Posting. */
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+
+void
+qla24xx_reset_adapter(scsi_qla_host_t *ha)
+{
+ unsigned long flags = 0;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+
+ ha->flags.online = 0;
+ ha->isp_ops.disable_intrs(ha);
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
+ RD_REG_DWORD(&reg->hccr);
+ WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
+ RD_REG_DWORD(&reg->hccr);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+int
+qla24xx_nvram_config(scsi_qla_host_t *ha)
+{
+ int rval;
+ struct init_cb_24xx *icb;
+ struct nvram_24xx *nv;
+ uint32_t *dptr;
+ uint8_t *dptr1, *dptr2;
+ uint32_t chksum;
+ uint16_t cnt;
+
+ rval = QLA_SUCCESS;
+ icb = (struct init_cb_24xx *)ha->init_cb;
+ nv = (struct nvram_24xx *)ha->request_ring;
+
+ /* Determine NVRAM starting address. */
+ ha->nvram_size = sizeof(struct nvram_24xx);
+ ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+ if (PCI_FUNC(ha->pdev->devfn))
+ ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
+
+ /* Get NVRAM data and calculate checksum. */
+ dptr = (uint32_t *)nv;
+ ha->isp_ops.read_nvram(ha, (uint8_t *)dptr, ha->nvram_base,
+ ha->nvram_size);
+ for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
+ chksum += le32_to_cpu(*dptr++);
+
+ DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
+ ha->nvram_size));
+
+ /* Bad NVRAM data, set defaults parameters. */
+ if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
+ || nv->id[3] != ' ' ||
+ nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
+ /* Reset NVRAM data. */
+ qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
+ "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
+ le16_to_cpu(nv->nvram_version));
+ qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+ "invalid -- WWPN) defaults.\n");
+
+ /*
+ * Set default initialization control block.
+ */
+ memset(nv, 0, ha->nvram_size);
+ nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->frame_payload_size = __constant_cpu_to_le16(2048);
+ nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+ nv->exchange_count = __constant_cpu_to_le16(0);
+ nv->hard_address = __constant_cpu_to_le16(124);
+ nv->port_name[0] = 0x21;
+ nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+ nv->port_name[2] = 0x00;
+ nv->port_name[3] = 0xe0;
+ nv->port_name[4] = 0x8b;
+ nv->port_name[5] = 0x1c;
+ nv->port_name[6] = 0x55;
+ nv->port_name[7] = 0x86;
+ nv->node_name[0] = 0x20;
+ nv->node_name[1] = 0x00;
+ nv->node_name[2] = 0x00;
+ nv->node_name[3] = 0xe0;
+ nv->node_name[4] = 0x8b;
+ nv->node_name[5] = 0x1c;
+ nv->node_name[6] = 0x55;
+ nv->node_name[7] = 0x86;
+ nv->login_retry_count = __constant_cpu_to_le16(8);
+ nv->link_down_timeout = __constant_cpu_to_le16(200);
+ nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+ nv->login_timeout = __constant_cpu_to_le16(0);
+ nv->firmware_options_1 =
+ __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+ nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+ nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+ nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+ nv->efi_parameters = __constant_cpu_to_le32(0);
+ nv->reset_delay = 5;
+ nv->max_luns_per_target = __constant_cpu_to_le16(128);
+ nv->port_down_retry_count = __constant_cpu_to_le16(30);
+ nv->link_down_timeout = __constant_cpu_to_le16(30);
+
+ rval = 1;
+ }
+
+ /* Reset Initialization control block */
+ memset(icb, 0, sizeof(struct init_cb_24xx));
+
+ /* Copy 1st segment. */
+ dptr1 = (uint8_t *)icb;
+ dptr2 = (uint8_t *)&nv->version;
+ cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ icb->login_retry_count = nv->login_retry_count;
+ icb->link_down_timeout = nv->link_down_timeout;
+
+ /* Copy 2nd segment. */
+ dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
+ dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
+ cnt = (uint8_t *)&icb->reserved_3 -
+ (uint8_t *)&icb->interrupt_delay_timer;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ /*
+ * Setup driver NVRAM options.
+ */
+ if (memcmp(nv->model_name, BINZERO, sizeof(nv->model_name)) != 0) {
+ char *st, *en;
+ uint16_t index;
+
+ strncpy(ha->model_number, nv->model_name,
+ sizeof(nv->model_name));
+ st = en = ha->model_number;
+ en += sizeof(nv->model_name) - 1;
+ while (en > st) {
+ if (*en != 0x20 && *en != 0x00)
+ break;
+ *en-- = '\0';
+ }
+
+ index = (ha->pdev->subsystem_device & 0xff);
+ if (index < QLA_MODEL_NAMES)
+ ha->model_desc = qla2x00_model_desc[index];
+ } else
+ strcpy(ha->model_number, "QLA2462");
+
+ /* Prepare nodename */
+ if ((icb->firmware_options_1 & BIT_14) == 0) {
+ /*
+ * Firmware will apply the following mask if the nodename was
+ * not provided.
+ */
+ memcpy(icb->node_name, icb->port_name, WWN_SIZE);
+ icb->node_name[0] &= 0xF0;
+ }
+
+ /* Set host adapter parameters. */
+ ha->flags.disable_risc_code_load = 0;
+ ha->flags.enable_lip_reset = 1;
+ ha->flags.enable_lip_full_login = 1;
+ ha->flags.enable_target_reset = 1;
+ ha->flags.enable_led_scheme = 0;
+
+ ha->operating_mode =
+ (icb->firmware_options_2 & (BIT_6 | BIT_5 | BIT_4)) >> 4;
+
+ memcpy(ha->fw_seriallink_options24, nv->seriallink_options,
+ sizeof(ha->fw_seriallink_options24));
+
+ /* save HBA serial number */
+ ha->serial0 = icb->port_name[5];
+ ha->serial1 = icb->port_name[6];
+ ha->serial2 = icb->port_name[7];
+ ha->node_name = icb->node_name;
+ ha->port_name = icb->port_name;
+
+ ha->retry_count = le16_to_cpu(nv->login_retry_count);
+
+ /* Set minimum login_timeout to 4 seconds. */
+ if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
+ nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
+ if (le16_to_cpu(nv->login_timeout) < 4)
+ nv->login_timeout = __constant_cpu_to_le16(4);
+ ha->login_timeout = le16_to_cpu(nv->login_timeout);
+ icb->login_timeout = cpu_to_le16(nv->login_timeout);
+
+ /* Set minimum RATOV to 200 tenths of a second. */
+ ha->r_a_tov = 200;
+
+ ha->loop_reset_delay = nv->reset_delay;
+
+ /* Link Down Timeout = 0:
+ *
+ * When Port Down timer expires we will start returning
+ * I/O's to OS with "DID_NO_CONNECT".
+ *
+ * Link Down Timeout != 0:
+ *
+ * The driver waits for the link to come up after link down
+ * before returning I/Os to OS with "DID_NO_CONNECT".
+ */
+ if (le16_to_cpu(nv->link_down_timeout) == 0) {
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
+ } else {
+ ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - ha->link_down_timeout);
+ }
+
+ /* Need enough time to try and get the port back. */
+ ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
+ if (qlport_down_retry)
+ ha->port_down_retry_count = qlport_down_retry;
+
+ /* Set login_retry_count */
+ ha->login_retry_count = le16_to_cpu(nv->login_retry_count);
+ if (ha->port_down_retry_count ==
+ le16_to_cpu(nv->port_down_retry_count) &&
+ ha->port_down_retry_count > 3)
+ ha->login_retry_count = ha->port_down_retry_count;
+ else if (ha->port_down_retry_count > (int)ha->login_retry_count)
+ ha->login_retry_count = ha->port_down_retry_count;
+ if (ql2xloginretrycount)
+ ha->login_retry_count = ql2xloginretrycount;
+
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+ }
+ return (rval);
+}
+
+int
+qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ uint16_t cnt;
+ uint16_t *risc_code;
+ unsigned long risc_address;
+ unsigned long risc_code_size;
+ int num;
+ int i;
+ uint16_t *req_ring;
+ struct qla_fw_info *fw_iter;
+
+ rval = QLA_SUCCESS;
+
+ /* Load firmware sequences */
+ fw_iter = ha->brd_info->fw_info;
+ *srisc_addr = *ha->brd_info->fw_info->fwstart;
+ while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
+ risc_code = fw_iter->fwcode;
+ risc_code_size = *fw_iter->fwlen;
+
+ if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
+ risc_address = *fw_iter->fwstart;
+ } else {
+ /* Extended address */
+ risc_address = *fw_iter->lfwstart;
+ }
+
+ num = 0;
+ rval = 0;
+ while (risc_code_size > 0 && !rval) {
+ cnt = (uint16_t)(ha->fw_transfer_size >> 1);
+ if (cnt > risc_code_size)
+ cnt = risc_code_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ "
+ "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
+ ha->host_no, risc_code, cnt, risc_address));
+
+ req_ring = (uint16_t *)ha->request_ring;
+ for (i = 0; i < cnt; i++)
+ req_ring[i] = cpu_to_le16(risc_code[i]);
+
+ if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
+ rval = qla2x00_load_ram(ha, ha->request_dma,
+ risc_address, cnt);
+ } else {
+ rval = qla2x00_load_ram_ext(ha,
+ ha->request_dma, risc_address, cnt);
+ }
+ if (rval) {
+ DEBUG(printk("scsi(%ld): [ERROR] Failed to "
+ "load segment %d of firmware\n",
+ ha->host_no, num));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", num);
+
+ qla2x00_dump_regs(ha);
+ break;
+ }
+
+ risc_code += cnt;
+ risc_address += cnt;
+ risc_code_size -= cnt;
+ num++;
+ }
+
+ /* Next firmware sequence */
+ fw_iter++;
+ }
+
+ return (rval);
+}
+
+int
+qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int segments, fragment;
+ uint32_t faddr;
+ uint32_t *dcode, dlen;
+ uint32_t risc_addr;
+ uint32_t risc_size;
+ uint32_t i;
+
+ rval = QLA_SUCCESS;
+
+ segments = FA_RISC_CODE_SEGMENTS;
+ faddr = FA_RISC_CODE_ADDR;
+ dcode = (uint32_t *)ha->request_ring;
+ *srisc_addr = 0;
+
+ /* Validate firmware image by checking version. */
+ qla24xx_read_flash_data(ha, dcode, faddr + 4, 4);
+ for (i = 0; i < 4; i++)
+ dcode[i] = be32_to_cpu(dcode[i]);
+ if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
+ dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
+ dcode[1], dcode[2], dcode[3]);
+
+ return QLA_FUNCTION_FAILED;
+ }
+
+ while (segments && rval == QLA_SUCCESS) {
+ /* Read segment's load information. */
+ qla24xx_read_flash_data(ha, dcode, faddr, 4);
+
+ risc_addr = be32_to_cpu(dcode[2]);
+ *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
+ risc_size = be32_to_cpu(dcode[3]);
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ dlen = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (dlen > risc_size)
+ dlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of dwords 0x%x, offset 0x%x.\n",
+ ha->host_no, risc_addr, dlen, faddr));
+
+ qla24xx_read_flash_data(ha, dcode, faddr, dlen);
+ for (i = 0; i < dlen; i++)
+ dcode[i] = swab32(dcode[i]);
+
+ rval = qla2x00_load_ram_ext(ha, ha->request_dma,
+ risc_addr, dlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ faddr += dlen;
+ risc_addr += dlen;
+ risc_size -= dlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ segments--;
+ }
+
+ return rval;
+}
+
+int
+qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int segments, fragment;
+ uint32_t *dcode, dlen;
+ uint32_t risc_addr;
+ uint32_t risc_size;
+ uint32_t i;
+ const struct firmware *fw_entry;
+ uint32_t *fwcode, fwclen;
+
+ if (request_firmware(&fw_entry, ha->brd_info->fw_fname,
+ &ha->pdev->dev)) {
+ qla_printk(KERN_ERR, ha,
+ "Firmware image file not available: '%s'\n",
+ ha->brd_info->fw_fname);
+ return QLA_FUNCTION_FAILED;
+ }
+
+ rval = QLA_SUCCESS;
+
+ segments = FA_RISC_CODE_SEGMENTS;
+ dcode = (uint32_t *)ha->request_ring;
+ *srisc_addr = 0;
+ fwcode = (uint32_t *)fw_entry->data;
+ fwclen = 0;
+
+ /* Validate firmware image by checking version. */
+ if (fw_entry->size < 8 * sizeof(uint32_t)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware image "
+ "(%Zd)!\n", fw_entry->size);
+ goto fail_fw_integrity;
+ }
+ for (i = 0; i < 4; i++)
+ dcode[i] = be32_to_cpu(fwcode[i + 4]);
+ if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
+ dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
+ dcode[1], dcode[2], dcode[3]);
+ goto fail_fw_integrity;
+ }
+
+ while (segments && rval == QLA_SUCCESS) {
+ risc_addr = be32_to_cpu(fwcode[2]);
+ *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
+ risc_size = be32_to_cpu(fwcode[3]);
+
+ /* Validate firmware image size. */
+ fwclen += risc_size * sizeof(uint32_t);
+ if (fw_entry->size < fwclen) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware "
+ "image (%Zd)!\n", fw_entry->size);
+ goto fail_fw_integrity;
+ }
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ dlen = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (dlen > risc_size)
+ dlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of dwords 0x%x.\n", ha->host_no,
+ risc_addr, dlen));
+
+ for (i = 0; i < dlen; i++)
+ dcode[i] = swab32(fwcode[i]);
+
+ rval = qla2x00_load_ram_ext(ha, ha->request_dma,
+ risc_addr, dlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ fwcode += dlen;
+ risc_addr += dlen;
+ risc_size -= dlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ segments--;
+ }
+
+ release_firmware(fw_entry);
+ return rval;
+
+fail_fw_integrity:
+
+ release_firmware(fw_entry);
+ return QLA_FUNCTION_FAILED;
+
+}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9e6d0511925..973871833e3 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1175,6 +1175,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
ha->isp_ops.reset_adapter = qla2x00_reset_adapter;
ha->isp_ops.nvram_config = qla2x00_nvram_config;
ha->isp_ops.update_fw_options = qla2x00_update_fw_options;
+ ha->isp_ops.load_risc = qla2x00_load_risc;
ha->isp_ops.pci_info_str = qla2x00_pci_info_str;
ha->isp_ops.fw_version_str = qla2x00_fw_version_str;
ha->isp_ops.intr_handler = qla2100_intr_handler;