aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c25
-rw-r--r--drivers/serial/8250_gsc.c2
-rw-r--r--drivers/serial/8250_pci.c17
-rw-r--r--drivers/serial/Kconfig16
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c118
-rw-r--r--drivers/serial/dz.c24
-rw-r--r--drivers/serial/icom.c2
-rw-r--r--drivers/serial/mpsc.c148
-rw-r--r--drivers/serial/samsung.c2
-rw-r--r--drivers/serial/serial_core.c3
-rw-r--r--drivers/serial/serial_txx9.c2
-rw-r--r--drivers/serial/zs.c21
12 files changed, 343 insertions, 37 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index ce948b66bbd..a97f1ae11f7 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1293,7 +1293,18 @@ receive_chars(struct uart_8250_port *up, unsigned int *status)
char flag;
do {
- ch = serial_inp(up, UART_RX);
+ if (likely(lsr & UART_LSR_DR))
+ ch = serial_inp(up, UART_RX);
+ else
+ /*
+ * Intel 82571 has a Serial Over Lan device that will
+ * set UART_LSR_BI without setting UART_LSR_DR when
+ * it receives a break. To avoid reading from the
+ * receive buffer without UART_LSR_DR bit set, we
+ * just force the read character to be 0
+ */
+ ch = 0;
+
flag = TTY_NORMAL;
up->port.icount.rx++;
@@ -1342,7 +1353,7 @@ receive_chars(struct uart_8250_port *up, unsigned int *status)
ignore_char:
lsr = serial_inp(up, UART_LSR);
- } while ((lsr & UART_LSR_DR) && (max_count-- > 0));
+ } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
spin_unlock(&up->port.lock);
tty_flip_buffer_push(tty);
spin_lock(&up->port.lock);
@@ -1425,7 +1436,7 @@ serial8250_handle_port(struct uart_8250_port *up)
DEBUG_INTR("status = %x...", status);
- if (status & UART_LSR_DR)
+ if (status & (UART_LSR_DR | UART_LSR_BI))
receive_chars(up, &status);
check_modem_status(up);
if (status & UART_LSR_THRE)
@@ -1874,7 +1885,9 @@ static int serial8250_startup(struct uart_port *port)
* the interrupt is enabled. Delays are necessary to
* allow register changes to become visible.
*/
- spin_lock_irqsave(&up->port.lock, flags);
+ spin_lock(&up->port.lock);
+ if (up->port.flags & UPF_SHARE_IRQ)
+ disable_irq_nosync(up->port.irq);
wait_for_xmitr(up, UART_LSR_THRE);
serial_out_sync(up, UART_IER, UART_IER_THRI);
@@ -1886,7 +1899,9 @@ static int serial8250_startup(struct uart_port *port)
iir = serial_in(up, UART_IIR);
serial_out(up, UART_IER, 0);
- spin_unlock_irqrestore(&up->port.lock, flags);
+ if (up->port.flags & UPF_SHARE_IRQ)
+ enable_irq(up->port.irq);
+ spin_unlock(&up->port.lock);
/*
* If the interrupt is not reasserted, setup a timer to
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 4eb7437a404..0416ad3bc12 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -119,3 +119,5 @@ int __init probe_serial_gsc(void)
}
module_init(probe_serial_gsc);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 1b36087665a..c2f23933155 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -767,6 +767,9 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+
/*
* Master list of serial port init/setup/exit quirks.
* This does not describe the general nature of the port.
@@ -882,6 +885,15 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9050,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
@@ -2197,6 +2209,11 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_4_921600 },
+ /* Unknown card - subdevice 0x1584 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
+ pbn_b0_4_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 8fc7451c004..3b4a14e355c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -942,22 +942,6 @@ config SERIAL_IP22_ZILOG_CONSOLE
depends on SERIAL_IP22_ZILOG=y
select SERIAL_CORE_CONSOLE
-config V850E_UART
- bool "NEC V850E on-chip UART support"
- depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
- select SERIAL_CORE
- default y
-
-config V850E_UARTB
- bool
- depends on V850E_UART && V850E_ME2
- default y
-
-config V850E_UART_CONSOLE
- bool "Use NEC V850E on-chip UART for console"
- depends on V850E_UART
- select SERIAL_CORE_CONSOLE
-
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
depends on SUPERH || H8300
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index abe129cc927..a4f86927a74 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -201,6 +201,10 @@ static void cpm_uart_int_tx(struct uart_port *port)
cpm_uart_tx_pump(port);
}
+#ifdef CONFIG_CONSOLE_POLL
+static int serial_polled;
+#endif
+
/*
* Receive characters
*/
@@ -209,7 +213,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
int i;
unsigned char ch;
u8 *cp;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
cbd_t __iomem *bdp;
u16 status;
@@ -222,6 +226,12 @@ static void cpm_uart_int_rx(struct uart_port *port)
*/
bdp = pinfo->rx_cur;
for (;;) {
+#ifdef CONFIG_CONSOLE_POLL
+ if (unlikely(serial_polled)) {
+ serial_polled = 0;
+ return;
+ }
+#endif
/* get status */
status = in_be16(&bdp->cbd_sc);
/* If this one is empty, return happy */
@@ -253,7 +263,12 @@ static void cpm_uart_int_rx(struct uart_port *port)
goto handle_error;
if (uart_handle_sysrq_char(port, ch))
continue;
-
+#ifdef CONFIG_CONSOLE_POLL
+ if (unlikely(serial_polled)) {
+ serial_polled = 0;
+ return;
+ }
+#endif
error_return:
tty_insert_flip_char(tty, ch, flg);
@@ -420,10 +435,13 @@ static void cpm_uart_shutdown(struct uart_port *port)
}
/* Shut them really down and reinit buffer descriptors */
- if (IS_SMC(pinfo))
+ if (IS_SMC(pinfo)) {
+ out_be16(&pinfo->smcup->smc_brkcr, 0);
cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
- else
+ } else {
+ out_be16(&pinfo->sccup->scc_brkcr, 0);
cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
+ }
cpm_uart_initbd(pinfo);
}
@@ -539,9 +557,11 @@ static void cpm_uart_set_termios(struct uart_port *port,
* enables, because we want to put them back if they were
* present.
*/
- prev_mode = in_be16(&smcp->smc_smcmr);
- out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | SMCMR_SM_UART);
- setbits16(&smcp->smc_smcmr, (prev_mode & (SMCMR_REN | SMCMR_TEN)));
+ prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN);
+ /* Output in *one* operation, so we don't interrupt RX/TX if they
+ * were already enabled. */
+ out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
+ SMCMR_SM_UART | prev_mode);
} else {
out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
}
@@ -865,6 +885,80 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
cpm_uart_request_port(port);
}
}
+
+#ifdef CONFIG_CONSOLE_POLL
+/* Serial polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+#define GDB_BUF_SIZE 512 /* power of 2, please */
+
+static char poll_buf[GDB_BUF_SIZE];
+static char *pollp;
+static int poll_chars;
+
+static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo)
+{
+ u_char c, *cp;
+ volatile cbd_t *bdp;
+ int i;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = pinfo->rx_cur;
+ while (bdp->cbd_sc & BD_SC_EMPTY)
+ ;
+
+ /* If the buffer address is in the CPM DPRAM, don't
+ * convert it.
+ */
+ cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+
+ if (obuf) {
+ i = c = bdp->cbd_datlen;
+ while (i-- > 0)
+ *obuf++ = *cp++;
+ } else
+ c = *cp;
+ bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
+ bdp->cbd_sc |= BD_SC_EMPTY;
+
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = pinfo->rx_bd_base;
+ else
+ bdp++;
+ pinfo->rx_cur = (cbd_t *)bdp;
+
+ return (int)c;
+}
+
+static int cpm_get_poll_char(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+ if (!serial_polled) {
+ serial_polled = 1;
+ poll_chars = 0;
+ }
+ if (poll_chars <= 0) {
+ poll_chars = poll_wait_key(poll_buf, pinfo);
+ pollp = poll_buf;
+ }
+ poll_chars--;
+ return *pollp++;
+}
+
+static void cpm_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ static char ch[2];
+
+ ch[0] = (char)c;
+ cpm_uart_early_write(pinfo->port.line, ch, 1);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
static struct uart_ops cpm_uart_pops = {
.tx_empty = cpm_uart_tx_empty,
.set_mctrl = cpm_uart_set_mctrl,
@@ -882,6 +976,10 @@ static struct uart_ops cpm_uart_pops = {
.request_port = cpm_uart_request_port,
.config_port = cpm_uart_config_port,
.verify_port = cpm_uart_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = cpm_get_poll_char,
+ .poll_put_char = cpm_put_poll_char,
+#endif
};
struct uart_cpm_port cpm_uart_ports[UART_NR];
@@ -1105,12 +1203,14 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
udbg_putc = NULL;
#endif
- cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
-
if (IS_SMC(pinfo)) {
+ out_be16(&pinfo->smcup->smc_brkcr, 0);
+ cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
} else {
+ out_be16(&pinfo->sccup->scc_brkcr, 0);
+ cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index a81d2c2ff8a..6042b87797a 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -642,6 +642,26 @@ static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
spin_unlock_irqrestore(&dport->port.lock, flags);
}
+/*
+ * Hack alert!
+ * Required solely so that the initial PROM-based console
+ * works undisturbed in parallel with this one.
+ */
+static void dz_pm(struct uart_port *uport, unsigned int state,
+ unsigned int oldstate)
+{
+ struct dz_port *dport = to_dport(uport);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dport->port.lock, flags);
+ if (state < 3)
+ dz_start_tx(&dport->port);
+ else
+ dz_stop_tx(&dport->port);
+ spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+
+
static const char *dz_type(struct uart_port *uport)
{
return "DZ";
@@ -738,6 +758,7 @@ static struct uart_ops dz_ops = {
.startup = dz_startup,
.shutdown = dz_shutdown,
.set_termios = dz_set_termios,
+ .pm = dz_pm,
.type = dz_type,
.release_port = dz_release_port,
.request_port = dz_request_port,
@@ -861,7 +882,10 @@ static int __init dz_console_setup(struct console *co, char *options)
if (ret)
return ret;
+ spin_lock_init(&dport->port.lock); /* For dz_pm(). */
+
dz_reset(dport);
+ dz_pm(uport, 0, -1);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 9c2df5c857c..2b7531d9f6a 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -730,7 +730,7 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
{
short int count, rcv_buff;
- struct tty_struct *tty = icom_port->uart_port.info->tty;
+ struct tty_struct *tty = icom_port->uart_port.info->port.tty;
unsigned short int status;
struct uart_icount *icount;
unsigned long offset;
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index c9f53e71f25..61d3ade5286 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -921,6 +921,10 @@ static int mpsc_make_ready(struct mpsc_port_info *pi)
return 0;
}
+#ifdef CONFIG_CONSOLE_POLL
+static int serial_polled;
+#endif
+
/*
******************************************************************************
*
@@ -956,7 +960,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
while (!((cmdstat = be32_to_cpu(rxre->cmdstat))
& SDMA_DESC_CMDSTAT_O)) {
bytes_in = be16_to_cpu(rxre->bytecnt);
-
+#ifdef CONFIG_CONSOLE_POLL
+ if (unlikely(serial_polled)) {
+ serial_polled = 0;
+ return 0;
+ }
+#endif
/* Following use of tty struct directly is deprecated */
if (unlikely(tty_buffer_request_room(tty, bytes_in)
< bytes_in)) {
@@ -1017,6 +1026,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
if (uart_handle_sysrq_char(&pi->port, *bp)) {
bp++;
bytes_in--;
+#ifdef CONFIG_CONSOLE_POLL
+ if (unlikely(serial_polled)) {
+ serial_polled = 0;
+ return 0;
+ }
+#endif
goto next_frame;
}
@@ -1519,6 +1534,133 @@ static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
return rc;
}
+#ifdef CONFIG_CONSOLE_POLL
+/* Serial polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static char poll_buf[2048];
+static int poll_ptr;
+static int poll_cnt;
+static void mpsc_put_poll_char(struct uart_port *port,
+ unsigned char c);
+
+static int mpsc_get_poll_char(struct uart_port *port)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ struct mpsc_rx_desc *rxre;
+ u32 cmdstat, bytes_in, i;
+ u8 *bp;
+
+ if (!serial_polled)
+ serial_polled = 1;
+
+ pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
+
+ if (poll_cnt) {
+ poll_cnt--;
+ return poll_buf[poll_ptr++];
+ }
+ poll_ptr = 0;
+ poll_cnt = 0;
+
+ while (poll_cnt == 0) {
+ rxre = (struct mpsc_rx_desc *)(pi->rxr +
+ (pi->rxr_posn*MPSC_RXRE_SIZE));
+ dma_cache_sync(pi->port.dev, (void *)rxre,
+ MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+ /*
+ * Loop through Rx descriptors handling ones that have
+ * been completed.
+ */
+ while (poll_cnt == 0 &&
+ !((cmdstat = be32_to_cpu(rxre->cmdstat)) &
+ SDMA_DESC_CMDSTAT_O)){
+ bytes_in = be16_to_cpu(rxre->bytecnt);
+ bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
+ dma_cache_sync(pi->port.dev, (void *) bp,
+ MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)bp,
+ (ulong)bp + MPSC_RXBE_SIZE);
+#endif
+ if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
+ SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
+ !(cmdstat & pi->port.ignore_status_mask)) {
+ poll_buf[poll_cnt] = *bp;
+ poll_cnt++;
+ } else {
+ for (i = 0; i < bytes_in; i++) {
+ poll_buf[poll_cnt] = *bp++;
+ poll_cnt++;
+ }
+ pi->port.icount.rx += bytes_in;
+ }
+ rxre->bytecnt = cpu_to_be16(0);
+ wmb();
+ rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
+ SDMA_DESC_CMDSTAT_EI |
+ SDMA_DESC_CMDSTAT_F |
+ SDMA_DESC_CMDSTAT_L);
+ wmb();
+ dma_cache_sync(pi->port.dev, (void *)rxre,
+ MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ flush_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+ /* Advance to next descriptor */
+ pi->rxr_posn = (pi->rxr_posn + 1) &
+ (MPSC_RXR_ENTRIES - 1);
+ rxre = (struct mpsc_rx_desc *)(pi->rxr +
+ (pi->rxr_posn * MPSC_RXRE_SIZE));
+ dma_cache_sync(pi->port.dev, (void *)rxre,
+ MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+ }
+
+ /* Restart rx engine, if its stopped */
+ if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
+ mpsc_start_rx(pi);
+ }
+ if (poll_cnt) {
+ poll_cnt--;
+ return poll_buf[poll_ptr++];
+ }
+
+ return 0;
+}
+
+
+static void mpsc_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ u32 data;
+
+ data = readl(pi->mpsc_base + MPSC_MPCR);
+ writeb(c, pi->mpsc_base + MPSC_CHR_1);
+ mb();
+ data = readl(pi->mpsc_base + MPSC_CHR_2);
+ data |= MPSC_CHR_2_TTCS;
+ writel(data, pi->mpsc_base + MPSC_CHR_2);
+ mb();
+
+ while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS);
+}
+#endif
static struct uart_ops mpsc_pops = {
.tx_empty = mpsc_tx_empty,
@@ -1537,6 +1679,10 @@ static struct uart_ops mpsc_pops = {
.request_port = mpsc_request_port,
.config_port = mpsc_config_port,
.verify_port = mpsc_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = mpsc_get_poll_char,
+ .poll_put_char = mpsc_put_poll_char,
+#endif
};
/*
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 4a3ecaa629e..d852f83f890 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -202,7 +202,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
{
struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->info->port.tty;
unsigned int ufcon, ch, flag, ufstat, uerstat;
int max_count = 64;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 0bce1fe2c62..f977c98cfa9 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -934,7 +934,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
return ret;
}
-static void uart_break_ctl(struct tty_struct *tty, int break_state)
+static int uart_break_ctl(struct tty_struct *tty, int break_state)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->port;
@@ -945,6 +945,7 @@ static void uart_break_ctl(struct tty_struct *tty, int break_state)
port->ops->break_ctl(port, break_state);
mutex_unlock(&state->mutex);
+ return 0;
}
static int uart_do_autoconfig(struct uart_state *state)
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 7ad21925869..8fcb4c5b9a2 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -272,7 +272,7 @@ static void serial_txx9_initialize(struct uart_port *port)
static inline void
receive_chars(struct uart_txx9_port *up, unsigned int *status)
{
- struct tty_struct *tty = up->port.info->tty;
+ struct tty_struct *tty = up->port.info->port.tty;
unsigned char ch;
unsigned int disr = *status;
int max_count = 256;
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index bd45b6230fd..9e6a873f820 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -787,7 +787,6 @@ static int zs_startup(struct uart_port *uport)
zport->regs[1] &= ~RxINT_MASK;
zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB;
zport->regs[3] |= RxENABLE;
- zport->regs[5] |= TxENAB;
zport->regs[15] |= BRKIE;
write_zsreg(zport, R1, zport->regs[1]);
write_zsreg(zport, R3, zport->regs[3]);
@@ -814,7 +813,6 @@ static void zs_shutdown(struct uart_port *uport)
spin_lock_irqsave(&scc->zlock, flags);
- zport->regs[5] &= ~TxENAB;
zport->regs[3] &= ~RxENABLE;
write_zsreg(zport, R5, zport->regs[5]);
write_zsreg(zport, R3, zport->regs[3]);
@@ -959,6 +957,23 @@ static void zs_set_termios(struct uart_port *uport, struct ktermios *termios,
spin_unlock_irqrestore(&scc->zlock, flags);
}
+/*
+ * Hack alert!
+ * Required solely so that the initial PROM-based console
+ * works undisturbed in parallel with this one.
+ */
+static void zs_pm(struct uart_port *uport, unsigned int state,
+ unsigned int oldstate)
+{
+ struct zs_port *zport = to_zport(uport);
+
+ if (state < 3)
+ zport->regs[5] |= TxENAB;
+ else
+ zport->regs[5] &= ~TxENAB;
+ write_zsreg(zport, R5, zport->regs[5]);
+}
+
static const char *zs_type(struct uart_port *uport)
{
@@ -1041,6 +1056,7 @@ static struct uart_ops zs_ops = {
.startup = zs_startup,
.shutdown = zs_shutdown,
.set_termios = zs_set_termios,
+ .pm = zs_pm,
.type = zs_type,
.release_port = zs_release_port,
.request_port = zs_request_port,
@@ -1190,6 +1206,7 @@ static int __init zs_console_setup(struct console *co, char *options)
return ret;
zs_reset(zport);
+ zs_pm(uport, 0, -1);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-04 21:57:50 +0000