diff options
Diffstat (limited to 'drivers/staging/stlc45xx/stlc45xx.h')
-rw-r--r-- | drivers/staging/stlc45xx/stlc45xx.h | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/drivers/staging/stlc45xx/stlc45xx.h b/drivers/staging/stlc45xx/stlc45xx.h deleted file mode 100644 index ac96bbbde79..00000000000 --- a/drivers/staging/stlc45xx/stlc45xx.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * This file is part of stlc45xx - * - * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). - * - * Contact: Kalle Valo <kalle.valo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/mutex.h> -#include <linux/list.h> -#include <net/mac80211.h> - -#include "stlc45xx_lmac.h" - -#define DRIVER_NAME "stlc45xx" -#define DRIVER_VERSION "0.1.3" - -#define DRIVER_PREFIX DRIVER_NAME ": " - -enum { - DEBUG_NONE = 0, - DEBUG_FUNC = 1 << 0, - DEBUG_IRQ = 1 << 1, - DEBUG_BH = 1 << 2, - DEBUG_RX = 1 << 3, - DEBUG_RX_CONTENT = 1 << 5, - DEBUG_TX = 1 << 6, - DEBUG_TX_CONTENT = 1 << 8, - DEBUG_TXBUFFER = 1 << 9, - DEBUG_QUEUE = 1 << 10, - DEBUG_BOOT = 1 << 11, - DEBUG_PSM = 1 << 12, - DEBUG_ALL = ~0, -}; - -#define DEBUG_LEVEL DEBUG_NONE -/* #define DEBUG_LEVEL DEBUG_ALL */ -/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_RX | DEBUG_IRQ) */ -/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_MEMREGION | DEBUG_QUEUE) */ -/* #define DEBUG_LEVEL (DEBUG_MEMREGION | DEBUG_QUEUE) */ - -#define stlc45xx_error(fmt, arg...) \ - printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg) - -#define stlc45xx_warning(fmt, arg...) \ - printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg) - -#define stlc45xx_info(fmt, arg...) \ - printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg) - -#define stlc45xx_debug(level, fmt, arg...) \ - do { \ - if (level & DEBUG_LEVEL) \ - printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \ - } while (0) - -#define stlc45xx_dump(level, buf, len) \ - do { \ - if (level & DEBUG_LEVEL) \ - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ - 16, 1, buf, len, 1); \ - } while (0) - -#define MAC2STR(a) ((a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]) -#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x" - -/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */ -#define ADDR_READ_BIT_15 0x8000 - -#define SPI_ADRS_ARM_INTERRUPTS 0x00 -#define SPI_ADRS_ARM_INT_EN 0x04 - -#define SPI_ADRS_HOST_INTERRUPTS 0x08 -#define SPI_ADRS_HOST_INT_EN 0x0c -#define SPI_ADRS_HOST_INT_ACK 0x10 - -#define SPI_ADRS_GEN_PURP_1 0x14 -#define SPI_ADRS_GEN_PURP_2 0x18 - -/* high word */ -#define SPI_ADRS_DEV_CTRL_STAT 0x26 - -#define SPI_ADRS_DMA_DATA 0x28 - -#define SPI_ADRS_DMA_WRITE_CTRL 0x2c -#define SPI_ADRS_DMA_WRITE_LEN 0x2e -#define SPI_ADRS_DMA_WRITE_BASE 0x30 - -#define SPI_ADRS_DMA_READ_CTRL 0x34 -#define SPI_ADRS_DMA_READ_LEN 0x36 -#define SPI_ADRS_DMA_READ_BASE 0x38 - -#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000 -#define SPI_CTRL_STAT_START_HALTED 0x4000 -#define SPI_CTRL_STAT_RAM_BOOT 0x2000 -#define SPI_CTRL_STAT_HOST_RESET 0x1000 -#define SPI_CTRL_STAT_HOST_CPU_EN 0x0800 - -#define SPI_DMA_WRITE_CTRL_ENABLE 0x0001 -#define SPI_DMA_READ_CTRL_ENABLE 0x0001 -#define HOST_ALLOWED (1 << 7) - -#define FIRMWARE_ADDRESS 0x20000 - -#define SPI_TIMEOUT 100 /* msec */ - -#define SPI_MAX_TX_PACKETS 32 - -#define SPI_MAX_PACKET_SIZE 32767 - -#define SPI_TARGET_INT_WAKEUP 0x00000001 -#define SPI_TARGET_INT_SLEEP 0x00000002 -#define SPI_TARGET_INT_RDDONE 0x00000004 - -#define SPI_TARGET_INT_CTS 0x00004000 -#define SPI_TARGET_INT_DR 0x00008000 - -#define SPI_HOST_INT_READY 0x00000001 -#define SPI_HOST_INT_WR_READY 0x00000002 -#define SPI_HOST_INT_SW_UPDATE 0x00000004 -#define SPI_HOST_INT_UPDATE 0x10000000 - -/* clear to send */ -#define SPI_HOST_INT_CTS 0x00004000 - -/* data ready */ -#define SPI_HOST_INT_DR 0x00008000 - -#define SPI_HOST_INTS_DEFAULT \ - (SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE) - -#define TARGET_BOOT_SLEEP 50 - -/* The firmware buffer is divided into three areas: - * - * o config area (for control commands) - * o tx buffer - * o rx buffer - */ -#define FIRMWARE_BUFFER_START 0x20200 -#define FIRMWARE_BUFFER_END 0x27c60 -#define FIRMWARE_BUFFER_LEN (FIRMWARE_BUFFER_END - FIRMWARE_BUFFER_START) -#define FIRMWARE_MTU 3240 -#define FIRMWARE_CONFIG_PAYLOAD_LEN 1024 -#define FIRMWARE_CONFIG_START FIRMWARE_BUFFER_START -#define FIRMWARE_CONFIG_LEN (sizeof(struct s_lm_control) + \ - FIRMWARE_CONFIG_PAYLOAD_LEN) -#define FIRMWARE_CONFIG_END (FIRMWARE_CONFIG_START + FIRMWARE_CONFIG_LEN - 1) -#define FIRMWARE_RXBUFFER_LEN (5 * FIRMWARE_MTU + 1024) -#define FIRMWARE_RXBUFFER_START (FIRMWARE_BUFFER_END - FIRMWARE_RXBUFFER_LEN) -#define FIRMWARE_RXBUFFER_END (FIRMWARE_RXBUFFER_START + \ - FIRMWARE_RXBUFFER_LEN - 1) -#define FIRMWARE_TXBUFFER_START (FIRMWARE_BUFFER_START + FIRMWARE_CONFIG_LEN) -#define FIRMWARE_TXBUFFER_LEN (FIRMWARE_BUFFER_LEN - FIRMWARE_CONFIG_LEN - \ - FIRMWARE_RXBUFFER_LEN) -#define FIRMWARE_TXBUFFER_END (FIRMWARE_TXBUFFER_START + \ - FIRMWARE_TXBUFFER_LEN - 1) - -#define FIRMWARE_TXBUFFER_HEADER 100 -#define FIRMWARE_TXBUFFER_TRAILER 4 - -/* FIXME: come up with a proper value */ -#define MAX_FRAME_LEN 2500 - -/* unit is ms */ -#define TX_FRAME_LIFETIME 2000 -#define TX_TIMEOUT 4000 - -#define SUPPORTED_CHANNELS 13 - -/* FIXME */ -/* #define CHANNEL_CAL_LEN offsetof(struct s_lmo_scan, bratemask) - \ */ -/* offsetof(struct s_lmo_scan, channel) */ -#define CHANNEL_CAL_LEN 292 -#define CHANNEL_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * CHANNEL_CAL_LEN) -/* FIXME */ -/* #define RSSI_CAL_LEN sizeof(struct s_lmo_scan) - \ */ -/* offsetof(struct s_lmo_scan, rssical) */ -#define RSSI_CAL_LEN 8 -#define RSSI_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * RSSI_CAL_LEN) - -struct s_dma_regs { - unsigned short cmd; - unsigned short len; - unsigned long addr; -}; - -struct stlc45xx_ie_tim { - u8 dtim_count; - u8 dtim_period; - u8 bmap_control; - u8 pvbmap[251]; -}; - -struct txbuffer { - /* can be removed when switched to skb queue */ - struct list_head tx_list; - - struct list_head buffer_list; - - int start; - int frame_start; - int end; - - struct sk_buff *skb; - u32 handle; - - bool status_needed; - - int header_len; - - /* unit jiffies */ - unsigned long lifetime; -}; - -enum fw_state { - FW_STATE_OFF, - FW_STATE_BOOTING, - FW_STATE_READY, - FW_STATE_RESET, - FW_STATE_RESETTING, -}; - -struct stlc45xx { - struct ieee80211_hw *hw; - struct spi_device *spi; - struct work_struct work; - struct work_struct work_reset; - struct delayed_work work_tx_timeout; - struct mutex mutex; - struct completion fw_comp; - - - u8 bssid[ETH_ALEN]; - u8 mac_addr[ETH_ALEN]; - int channel; - - u8 *cal_rssi; - u8 *cal_channels; - - enum fw_state fw_state; - - spinlock_t tx_lock; - - /* protected by tx_lock */ - struct list_head txbuffer; - - /* protected by tx_lock */ - struct list_head tx_pending; - - /* protected by tx_lock */ - int tx_queue_stopped; - - /* protected by mutex */ - struct list_head tx_sent; - - int tx_frames; - - u8 *fw; - int fw_len; - - bool psm; - bool associated; - int aid; - bool pspolling; -}; - - |