aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/sl811-hcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/sl811-hcd.c')
-rw-r--r--drivers/usb/host/sl811-hcd.c101
1 files changed, 52 insertions, 49 deletions
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index d2a1fd40dfc..a7722a6a5a5 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -54,6 +54,7 @@
#include <linux/interrupt.h>
#include <linux/usb.h>
#include <linux/usb_sl811.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -782,6 +783,9 @@ retry:
/* usb 1.1 says max 90% of a frame is available for periodic transfers.
* this driver doesn't promise that much since it's got to handle an
* IRQ per packet; irq handling latencies also use up that time.
+ *
+ * NOTE: the periodic schedule is a sparse tree, with the load for
+ * each branch minimized. see fig 3.5 in the OHCI spec for example.
*/
#define MAX_PERIODIC_LOAD 500 /* out of 1000 usec */
@@ -815,7 +819,7 @@ static int sl811h_urb_enqueue(
struct usb_hcd *hcd,
struct usb_host_endpoint *hep,
struct urb *urb,
- unsigned mem_flags
+ gfp_t mem_flags
) {
struct sl811 *sl811 = hcd_to_sl811(hcd);
struct usb_device *udev = urb->dev;
@@ -843,6 +847,7 @@ static int sl811h_urb_enqueue(
if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
|| !HC_IS_RUNNING(hcd->state)) {
retval = -ENODEV;
+ kfree(ep);
goto fail;
}
@@ -911,8 +916,16 @@ static int sl811h_urb_enqueue(
case PIPE_ISOCHRONOUS:
case PIPE_INTERRUPT:
urb->interval = ep->period;
- if (ep->branch < PERIODIC_SIZE)
+ if (ep->branch < PERIODIC_SIZE) {
+ /* NOTE: the phase is correct here, but the value
+ * needs offsetting by the transfer queue depth.
+ * All current drivers ignore start_frame, so this
+ * is unlikely to ever matter...
+ */
+ urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1))
+ + ep->branch;
break;
+ }
retval = balance(sl811, ep->period, ep->load);
if (retval < 0)
@@ -1122,7 +1135,7 @@ sl811h_hub_descriptor (
desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
/* two bitmaps: ports removable, and legacy PortPwrCtrlMask */
- desc->bitmap[0] = 1 << 1;
+ desc->bitmap[0] = 0 << 1;
desc->bitmap[1] = ~0;
}
@@ -1351,7 +1364,7 @@ error:
#ifdef CONFIG_PM
static int
-sl811h_hub_suspend(struct usb_hcd *hcd)
+sl811h_bus_suspend(struct usb_hcd *hcd)
{
// SOFs off
DBG("%s\n", __FUNCTION__);
@@ -1359,7 +1372,7 @@ sl811h_hub_suspend(struct usb_hcd *hcd)
}
static int
-sl811h_hub_resume(struct usb_hcd *hcd)
+sl811h_bus_resume(struct usb_hcd *hcd)
{
// SOFs on
DBG("%s\n", __FUNCTION__);
@@ -1368,8 +1381,8 @@ sl811h_hub_resume(struct usb_hcd *hcd)
#else
-#define sl811h_hub_suspend NULL
-#define sl811h_hub_resume NULL
+#define sl811h_bus_suspend NULL
+#define sl811h_bus_resume NULL
#endif
@@ -1611,31 +1624,28 @@ static struct hc_driver sl811h_hc_driver = {
*/
.hub_status_data = sl811h_hub_status_data,
.hub_control = sl811h_hub_control,
- .hub_suspend = sl811h_hub_suspend,
- .hub_resume = sl811h_hub_resume,
+ .bus_suspend = sl811h_bus_suspend,
+ .bus_resume = sl811h_bus_resume,
};
/*-------------------------------------------------------------------------*/
static int __devexit
-sl811h_remove(struct device *dev)
+sl811h_remove(struct platform_device *dev)
{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
struct sl811 *sl811 = hcd_to_sl811(hcd);
- struct platform_device *pdev;
struct resource *res;
- pdev = container_of(dev, struct platform_device, dev);
-
remove_debug_file(sl811);
usb_remove_hcd(hcd);
/* some platforms may use IORESOURCE_IO */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ res = platform_get_resource(dev, IORESOURCE_MEM, 1);
if (res)
iounmap(sl811->data_reg);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (res)
iounmap(sl811->addr_reg);
@@ -1644,11 +1654,10 @@ sl811h_remove(struct device *dev)
}
static int __devinit
-sl811h_probe(struct device *dev)
+sl811h_probe(struct platform_device *dev)
{
struct usb_hcd *hcd;
struct sl811 *sl811;
- struct platform_device *pdev;
struct resource *addr, *data;
int irq;
void __iomem *addr_reg;
@@ -1661,24 +1670,23 @@ sl811h_probe(struct device *dev)
* specific platform_data. we don't probe for IRQs, and do only
* minimal sanity checking.
*/
- pdev = container_of(dev, struct platform_device, dev);
- irq = platform_get_irq(pdev, 0);
- if (pdev->num_resources < 3 || irq < 0)
+ irq = platform_get_irq(dev, 0);
+ if (dev->num_resources < 3 || irq < 0)
return -ENODEV;
/* refuse to confuse usbcore */
- if (dev->dma_mask) {
+ if (dev->dev.dma_mask) {
DBG("no we won't dma\n");
return -EINVAL;
}
/* the chip may be wired for either kind of addressing */
- addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ addr = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ data = platform_get_resource(dev, IORESOURCE_MEM, 1);
retval = -EBUSY;
if (!addr || !data) {
- addr = platform_get_resource(pdev, IORESOURCE_IO, 0);
- data = platform_get_resource(pdev, IORESOURCE_IO, 1);
+ addr = platform_get_resource(dev, IORESOURCE_IO, 0);
+ data = platform_get_resource(dev, IORESOURCE_IO, 1);
if (!addr || !data)
return -ENODEV;
ioaddr = 1;
@@ -1700,7 +1708,7 @@ sl811h_probe(struct device *dev)
}
/* allocate and initialize hcd */
- hcd = usb_create_hcd(&sl811h_hc_driver, dev, dev->bus_id);
+ hcd = usb_create_hcd(&sl811h_hc_driver, &dev->dev, dev->dev.bus_id);
if (!hcd) {
retval = -ENOMEM;
goto err5;
@@ -1710,7 +1718,7 @@ sl811h_probe(struct device *dev)
spin_lock_init(&sl811->lock);
INIT_LIST_HEAD(&sl811->async);
- sl811->board = dev->platform_data;
+ sl811->board = dev->dev.platform_data;
init_timer(&sl811->timer);
sl811->timer.function = sl811h_timer;
sl811->timer.data = (unsigned long) sl811;
@@ -1772,45 +1780,39 @@ sl811h_probe(struct device *dev)
*/
static int
-sl811h_suspend(struct device *dev, pm_message_t state, u32 phase)
+sl811h_suspend(struct platform_device *dev, pm_message_t state)
{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
struct sl811 *sl811 = hcd_to_sl811(hcd);
int retval = 0;
- if (phase != SUSPEND_POWER_DOWN)
- return retval;
-
if (state.event == PM_EVENT_FREEZE)
- retval = sl811h_hub_suspend(hcd);
+ retval = sl811h_bus_suspend(hcd);
else if (state.event == PM_EVENT_SUSPEND)
port_power(sl811, 0);
if (retval == 0)
- dev->power.power_state = state;
+ dev->dev.power.power_state = state;
return retval;
}
static int
-sl811h_resume(struct device *dev, u32 phase)
+sl811h_resume(struct platform_device *dev)
{
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
struct sl811 *sl811 = hcd_to_sl811(hcd);
- if (phase != RESUME_POWER_ON)
- return 0;
-
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
- if (dev->power.power_state.event == PM_EVENT_SUSPEND
+ if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND
|| !hcd->can_wakeup) {
sl811->port1 = 0;
port_power(sl811, 1);
return 0;
}
- dev->power.power_state = PMSG_ON;
- return sl811h_hub_resume(hcd);
+ dev->dev.power.power_state = PMSG_ON;
+ return sl811h_bus_resume(hcd);
}
#else
@@ -1822,15 +1824,16 @@ sl811h_resume(struct device *dev, u32 phase)
/* this driver is exported so sl811_cs can depend on it */
-struct device_driver sl811h_driver = {
- .name = (char *) hcd_name,
- .bus = &platform_bus_type,
-
+struct platform_driver sl811h_driver = {
.probe = sl811h_probe,
.remove = __devexit_p(sl811h_remove),
.suspend = sl811h_suspend,
.resume = sl811h_resume,
+ .driver = {
+ .name = (char *) hcd_name,
+ .owner = THIS_MODULE,
+ },
};
EXPORT_SYMBOL(sl811h_driver);
@@ -1842,12 +1845,12 @@ static int __init sl811h_init(void)
return -ENODEV;
INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION);
- return driver_register(&sl811h_driver);
+ return platform_driver_register(&sl811h_driver);
}
module_init(sl811h_init);
static void __exit sl811h_cleanup(void)
{
- driver_unregister(&sl811h_driver);
+ platform_driver_unregister(&sl811h_driver);
}
module_exit(sl811h_cleanup);