diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bonding/bond_3ad.c | 3 | ||||
-rw-r--r-- | drivers/net/bonding/bond_main.c | 107 | ||||
-rw-r--r-- | drivers/net/bonding/bonding.h | 10 |
3 files changed, 107 insertions, 13 deletions
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 6233c4ffb80..a2e8dda5afa 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2346,7 +2346,6 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) { struct slave *slave, *start_at; struct bonding *bond = dev->priv; - struct ethhdr *data = (struct ethhdr *)skb->data; int slave_agg_no; int slaves_in_agg; int agg_id; @@ -2377,7 +2376,7 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) goto out; } - slave_agg_no = (data->h_dest[5]^bond->dev->dev_addr[5]) % slaves_in_agg; + slave_agg_no = bond->xmit_hash_policy(skb, dev, slaves_in_agg); bond_for_each_slave(bond, slave, i) { struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 545f6fe025a..2c930da90a8 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -479,6 +479,14 @@ * - Support for generating gratuitous ARPs in active-backup mode. * Includes support for VLAN tagging all bonding-generated ARPs * as needed. Set version to 2.6.2. + * 2005/06/08 - Jason Gabler <jygabler at lbl dot gov> + * - alternate hashing policy support for mode 2 + * * Added kernel parameter "xmit_hash_policy" to allow the selection + * of different hashing policies for mode 2. The original mode 2 + * policy is the default, now found in xmit_hash_policy_layer2(). + * * Added xmit_hash_policy_layer34() + * - Modified by Jay Vosburgh <fubar@us.ibm.com> to also support mode 4. + * Set version to 2.6.3. */ //#define BONDING_DEBUG 1 @@ -493,7 +501,10 @@ #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/in.h> +#include <net/ip.h> #include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/udp.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/init.h> @@ -541,6 +552,7 @@ static int use_carrier = 1; static char *mode = NULL; static char *primary = NULL; static char *lacp_rate = NULL; +static char *xmit_hash_policy = NULL; static int arp_interval = BOND_LINK_ARP_INTERV; static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, }; @@ -560,6 +572,8 @@ module_param(primary, charp, 0); MODULE_PARM_DESC(primary, "Primary network device to use"); module_param(lacp_rate, charp, 0); MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner (slow/fast)"); +module_param(xmit_hash_policy, charp, 0); +MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method : 0 for layer 2 (default), 1 for layer 3+4"); module_param(arp_interval, int, 0); MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); module_param_array(arp_ip_target, charp, NULL, 0); @@ -579,6 +593,7 @@ static struct proc_dir_entry *bond_proc_dir = NULL; static u32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ; static int arp_ip_count = 0; static int bond_mode = BOND_MODE_ROUNDROBIN; +static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2; static int lacp_fast = 0; static int app_abi_ver = 0; static int orig_app_abi_ver = -1; /* This is used to save the first ABI version @@ -588,7 +603,6 @@ static int orig_app_abi_ver = -1; /* This is used to save the first ABI version * command comes from an application using * another ABI version. */ - struct bond_parm_tbl { char *modename; int mode; @@ -611,9 +625,15 @@ static struct bond_parm_tbl bond_mode_tbl[] = { { NULL, -1}, }; +static struct bond_parm_tbl xmit_hashtype_tbl[] = { +{ "layer2", BOND_XMIT_POLICY_LAYER2}, +{ "layer3+4", BOND_XMIT_POLICY_LAYER34}, +{ NULL, -1}, +}; + /*-------------------------- Forward declarations ---------------------------*/ -static inline void bond_set_mode_ops(struct net_device *bond_dev, int mode); +static inline void bond_set_mode_ops(struct bonding *bond, int mode); static void bond_send_gratuitous_arp(struct bonding *bond); /*---------------------------- General routines -----------------------------*/ @@ -3724,6 +3744,46 @@ static void bond_unregister_lacpdu(struct bonding *bond) dev_remove_pack(&(BOND_AD_INFO(bond).ad_pkt_type)); } +/*---------------------------- Hashing Policies -----------------------------*/ + +/* + * Hash for the the output device based upon layer 3 and layer 4 data. If + * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is + * altogether not IP, mimic bond_xmit_hash_policy_l2() + */ +static int bond_xmit_hash_policy_l34(struct sk_buff *skb, + struct net_device *bond_dev, int count) +{ + struct ethhdr *data = (struct ethhdr *)skb->data; + struct iphdr *iph = skb->nh.iph; + u16 *layer4hdr = (u16 *)((u32 *)iph + iph->ihl); + int layer4_xor = 0; + + if (skb->protocol == __constant_htons(ETH_P_IP)) { + if (!(iph->frag_off & __constant_htons(IP_MF|IP_OFFSET)) && + (iph->protocol == IPPROTO_TCP || + iph->protocol == IPPROTO_UDP)) { + layer4_xor = htons((*layer4hdr ^ *(layer4hdr + 1))); + } + return (layer4_xor ^ + ((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count; + + } + + return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; +} + +/* + * Hash for the output device based upon layer 2 data + */ +static int bond_xmit_hash_policy_l2(struct sk_buff *skb, + struct net_device *bond_dev, int count) +{ + struct ethhdr *data = (struct ethhdr *)skb->data; + + return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; +} + /*-------------------------- Device entry points ----------------------------*/ static int bond_open(struct net_device *bond_dev) @@ -4310,14 +4370,13 @@ out: } /* - * in XOR mode, we determine the output device by performing xor on - * the source and destination hw adresses. If this device is not - * enabled, find the next slave following this xor slave. + * In bond_xmit_xor() , we determine the output device by using a pre- + * determined xmit_hash_policy(), If the selected device is not enabled, + * find the next active slave. */ static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; - struct ethhdr *data = (struct ethhdr *)skb->data; struct slave *slave, *start_at; int slave_no; int i; @@ -4329,7 +4388,7 @@ static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev) goto out; } - slave_no = (data->h_dest[5]^bond_dev->dev_addr[5]) % bond->slave_cnt; + slave_no = bond->xmit_hash_policy(skb, bond_dev, bond->slave_cnt); bond_for_each_slave(bond, slave, i) { slave_no--; @@ -4425,8 +4484,10 @@ out: /* * set bond mode specific net device operations */ -static inline void bond_set_mode_ops(struct net_device *bond_dev, int mode) +static inline void bond_set_mode_ops(struct bonding *bond, int mode) { + struct net_device *bond_dev = bond->dev; + switch (mode) { case BOND_MODE_ROUNDROBIN: bond_dev->hard_start_xmit = bond_xmit_roundrobin; @@ -4436,12 +4497,20 @@ static inline void bond_set_mode_ops(struct net_device *bond_dev, int mode) break; case BOND_MODE_XOR: bond_dev->hard_start_xmit = bond_xmit_xor; + if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34) + bond->xmit_hash_policy = bond_xmit_hash_policy_l34; + else + bond->xmit_hash_policy = bond_xmit_hash_policy_l2; break; case BOND_MODE_BROADCAST: bond_dev->hard_start_xmit = bond_xmit_broadcast; break; case BOND_MODE_8023AD: bond_dev->hard_start_xmit = bond_3ad_xmit_xor; + if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34) + bond->xmit_hash_policy = bond_xmit_hash_policy_l34; + else + bond->xmit_hash_policy = bond_xmit_hash_policy_l2; break; case BOND_MODE_TLB: case BOND_MODE_ALB: @@ -4490,7 +4559,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par bond_dev->change_mtu = bond_change_mtu; bond_dev->set_mac_address = bond_set_mac_address; - bond_set_mode_ops(bond_dev, bond->params.mode); + bond_set_mode_ops(bond, bond->params.mode); bond_dev->destructor = free_netdev; @@ -4601,6 +4670,25 @@ static int bond_check_params(struct bond_params *params) } } + if (xmit_hash_policy) { + if ((bond_mode != BOND_MODE_XOR) && + (bond_mode != BOND_MODE_8023AD)) { + printk(KERN_INFO DRV_NAME + ": xor_mode param is irrelevant in mode %s\n", + bond_mode_name(bond_mode)); + } else { + xmit_hashtype = bond_parse_parm(xmit_hash_policy, + xmit_hashtype_tbl); + if (xmit_hashtype == -1) { + printk(KERN_ERR DRV_NAME + ": Error: Invalid xmit_hash_policy \"%s\"\n", + xmit_hash_policy == NULL ? "NULL" : + xmit_hash_policy); + return -EINVAL; + } + } + } + if (lacp_rate) { if (bond_mode != BOND_MODE_8023AD) { printk(KERN_INFO DRV_NAME @@ -4812,6 +4900,7 @@ static int bond_check_params(struct bond_params *params) /* fill params struct with the proper values */ params->mode = bond_mode; + params->xmit_policy = xmit_hashtype; params->miimon = miimon; params->arp_interval = arp_interval; params->updelay = updelay; diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 6558af22eda..d27f377b3ee 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -25,6 +25,10 @@ * * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> * - Code cleanup and style changes + * + * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov> + * - added "xmit_policy" kernel parameter for alternate hashing policy + * support for mode 2 */ #ifndef _LINUX_BONDING_H @@ -36,8 +40,8 @@ #include "bond_3ad.h" #include "bond_alb.h" -#define DRV_VERSION "2.6.2" -#define DRV_RELDATE "June 5, 2005" +#define DRV_VERSION "2.6.3" +#define DRV_RELDATE "June 8, 2005" #define DRV_NAME "bonding" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" @@ -137,6 +141,7 @@ struct bond_params { int mode; + int xmit_policy; int miimon; int arp_interval; int use_carrier; @@ -198,6 +203,7 @@ struct bonding { #endif /* CONFIG_PROC_FS */ struct list_head bond_list; struct dev_mc_list *mc_list; + int (*xmit_hash_policy)(struct sk_buff *, struct net_device *, int); u32 master_ip; u16 flags; struct ad_bond_info ad_info; |