aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/char/drm/mga_drv.h2
-rw-r--r--drivers/char/drm/mga_state.c2
-rw-r--r--drivers/message/fusion/mptsas.c12
3 files changed, 10 insertions, 6 deletions
diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h
index 474853deecf..461728e6a58 100644
--- a/drivers/char/drm/mga_drv.h
+++ b/drivers/char/drm/mga_drv.h
@@ -228,7 +228,7 @@ static inline u32 _MGA_READ(u32 * addr)
#define MGA_EMIT_STATE( dev_priv, dirty ) \
do { \
if ( (dirty) & ~MGA_UPLOAD_CLIPRECTS ) { \
- if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) { \
+ if ( dev_priv->chipset >= MGA_CARD_TYPE_G400 ) { \
mga_g400_emit_state( dev_priv ); \
} else { \
mga_g200_emit_state( dev_priv ); \
diff --git a/drivers/char/drm/mga_state.c b/drivers/char/drm/mga_state.c
index ee77685069d..47f54b5ae95 100644
--- a/drivers/char/drm/mga_state.c
+++ b/drivers/char/drm/mga_state.c
@@ -53,7 +53,7 @@ static void mga_emit_clip_rect(drm_mga_private_t * dev_priv,
/* Force reset of DWGCTL on G400 (eliminates clip disable bit).
*/
- if (dev_priv->chipset == MGA_CARD_TYPE_G400) {
+ if (dev_priv->chipset >= MGA_CARD_TYPE_G400) {
DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl,
MGA_LEN + MGA_EXEC, 0x80000000,
MGA_DWGCTL, ctx->dwgctl,
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 429820e48c6..7de19a84dc7 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -257,8 +257,8 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
printk("Target ID=0x%X\n", pg0->TargetID);
printk("Bus=0x%X\n", pg0->Bus);
- printk("PhyNum=0x%X\n", pg0->PhyNum);
- printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
+ printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
+ printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
printk("Physical Port=0x%X\n", pg0->PhysicalPort);
@@ -270,7 +270,7 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
printk("---- SAS EXPANDER PAGE 1 ------------\n");
printk("Physical Port=0x%X\n", pg1->PhysicalPort);
- printk("PHY Identifier=0x%X\n", pg1->Phy);
+ printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
@@ -604,7 +604,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
mptsas_print_expander_pg1(buffer);
/* save config data */
- phy_info->phy_id = buffer->Phy;
+ phy_info->phy_id = buffer->PhyIdentifier;
phy_info->port_id = buffer->PhysicalPort;
phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
@@ -825,6 +825,8 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
(MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
+ port_info->phy_info[i].identify.phy_id =
+ port_info->phy_info[i].phy_id;
handle = port_info->phy_info[i].identify.handle;
if (port_info->phy_info[i].attached.handle) {
@@ -881,6 +883,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
port_info->phy_info[i].identify.handle);
+ port_info->phy_info[i].identify.phy_id =
+ port_info->phy_info[i].phy_id;
}
if (port_info->phy_info[i].attached.handle) {