aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-xiic.c824
3 files changed, 835 insertions, 0 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ecf079b7f93..02afe89de16 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -581,6 +581,16 @@ config I2C_OCTEON
This driver can also be built as a module. If so, the module
will be called i2c-octeon.
+config I2C_XILINX
+ tristate "Xilinx I2C Controller"
+ depends on EXPERIMENTAL && HAS_IOMEM
+ help
+ If you say yes to this option, support will be included for the
+ Xilinx I2C controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called xilinx_i2c.
+
comment "External I2C/SMBus adapter drivers"
config I2C_PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 59abcf48e6a..097236f631e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
+obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
new file mode 100644
index 00000000000..eece39a5a30
--- /dev/null
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -0,0 +1,824 @@
+/*
+ * i2c-xiic.c
+ * Copyright (c) 2002-2007 Xilinx Inc.
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * This code was implemented by Mocean Laboratories AB when porting linux
+ * to the automotive development board Russellville. The copyright holder
+ * as seen in the header is Intel corporation.
+ * Mocean Laboratories forked off the GNU/Linux platform work into a
+ * separate company called Pelagicore AB, which commited the code to the
+ * kernel.
+ */
+
+/* Supports:
+ * Xilinx IIC
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/i2c-xiic.h>
+#include <linux/io.h>
+
+#define DRIVER_NAME "xiic-i2c"
+
+enum xilinx_i2c_state {
+ STATE_DONE,
+ STATE_ERROR,
+ STATE_START
+};
+
+/**
+ * struct xiic_i2c - Internal representation of the XIIC I2C bus
+ * @base: Memory base of the HW registers
+ * @wait: Wait queue for callers
+ * @adap: Kernel adapter representation
+ * @tx_msg: Messages from above to be sent
+ * @lock: Mutual exclusion
+ * @tx_pos: Current pos in TX message
+ * @nmsgs: Number of messages in tx_msg
+ * @state: See STATE_
+ * @rx_msg: Current RX message
+ * @rx_pos: Position within current RX message
+ */
+struct xiic_i2c {
+ void __iomem *base;
+ wait_queue_head_t wait;
+ struct i2c_adapter adap;
+ struct i2c_msg *tx_msg;
+ spinlock_t lock;
+ unsigned int tx_pos;
+ unsigned int nmsgs;
+ enum xilinx_i2c_state state;
+ struct i2c_msg *rx_msg;
+ int rx_pos;
+};
+
+
+#define XIIC_MSB_OFFSET 0
+#define XIIC_REG_OFFSET (0x100+XIIC_MSB_OFFSET)
+
+/*
+ * Register offsets in bytes from RegisterBase. Three is added to the
+ * base offset to access LSB (IBM style) of the word
+ */
+#define XIIC_CR_REG_OFFSET (0x00+XIIC_REG_OFFSET) /* Control Register */
+#define XIIC_SR_REG_OFFSET (0x04+XIIC_REG_OFFSET) /* Status Register */
+#define XIIC_DTR_REG_OFFSET (0x08+XIIC_REG_OFFSET) /* Data Tx Register */
+#define XIIC_DRR_REG_OFFSET (0x0C+XIIC_REG_OFFSET) /* Data Rx Register */
+#define XIIC_ADR_REG_OFFSET (0x10+XIIC_REG_OFFSET) /* Address Register */
+#define XIIC_TFO_REG_OFFSET (0x14+XIIC_REG_OFFSET) /* Tx FIFO Occupancy */
+#define XIIC_RFO_REG_OFFSET (0x18+XIIC_REG_OFFSET) /* Rx FIFO Occupancy */
+#define XIIC_TBA_REG_OFFSET (0x1C+XIIC_REG_OFFSET) /* 10 Bit Address reg */
+#define XIIC_RFD_REG_OFFSET (0x20+XIIC_REG_OFFSET) /* Rx FIFO Depth reg */
+#define XIIC_GPO_REG_OFFSET (0x24+XIIC_REG_OFFSET) /* Output Register */
+
+/* Control Register masks */
+#define XIIC_CR_ENABLE_DEVICE_MASK 0x01 /* Device enable = 1 */
+#define XIIC_CR_TX_FIFO_RESET_MASK 0x02 /* Transmit FIFO reset=1 */
+#define XIIC_CR_MSMS_MASK 0x04 /* Master starts Txing=1 */
+#define XIIC_CR_DIR_IS_TX_MASK 0x08 /* Dir of tx. Txing=1 */
+#define XIIC_CR_NO_ACK_MASK 0x10 /* Tx Ack. NO ack = 1 */
+#define XIIC_CR_REPEATED_START_MASK 0x20 /* Repeated start = 1 */
+#define XIIC_CR_GENERAL_CALL_MASK 0x40 /* Gen Call enabled = 1 */
+
+/* Status Register masks */
+#define XIIC_SR_GEN_CALL_MASK 0x01 /* 1=a mstr issued a GC */
+#define XIIC_SR_ADDR_AS_SLAVE_MASK 0x02 /* 1=when addr as slave */
+#define XIIC_SR_BUS_BUSY_MASK 0x04 /* 1 = bus is busy */
+#define XIIC_SR_MSTR_RDING_SLAVE_MASK 0x08 /* 1=Dir: mstr <-- slave */
+#define XIIC_SR_TX_FIFO_FULL_MASK 0x10 /* 1 = Tx FIFO full */
+#define XIIC_SR_RX_FIFO_FULL_MASK 0x20 /* 1 = Rx FIFO full */
+#define XIIC_SR_RX_FIFO_EMPTY_MASK 0x40 /* 1 = Rx FIFO empty */
+#define XIIC_SR_TX_FIFO_EMPTY_MASK 0x80 /* 1 = Tx FIFO empty */
+
+/* Interrupt Status Register masks Interrupt occurs when... */
+#define XIIC_INTR_ARB_LOST_MASK 0x01 /* 1 = arbitration lost */
+#define XIIC_INTR_TX_ERROR_MASK 0x02 /* 1=Tx error/msg complete */
+#define XIIC_INTR_TX_EMPTY_MASK 0x04 /* 1 = Tx FIFO/reg empty */
+#define XIIC_INTR_RX_FULL_MASK 0x08 /* 1=Rx FIFO/reg=OCY level */
+#define XIIC_INTR_BNB_MASK 0x10 /* 1 = Bus not busy */
+#define XIIC_INTR_AAS_MASK 0x20 /* 1 = when addr as slave */
+#define XIIC_INTR_NAAS_MASK 0x40 /* 1 = not addr as slave */
+#define XIIC_INTR_TX_HALF_MASK 0x80 /* 1 = TX FIFO half empty */
+
+/* The following constants specify the depth of the FIFOs */
+#define IIC_RX_FIFO_DEPTH 16 /* Rx fifo capacity */
+#define IIC_TX_FIFO_DEPTH 16 /* Tx fifo capacity */
+
+/* The following constants specify groups of interrupts that are typically
+ * enabled or disables at the same time
+ */
+#define XIIC_TX_INTERRUPTS \
+(XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)
+
+#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
+
+/* The following constants are used with the following macros to specify the
+ * operation, a read or write operation.
+ */
+#define XIIC_READ_OPERATION 1
+#define XIIC_WRITE_OPERATION 0
+
+/*
+ * Tx Fifo upper bit masks.
+ */
+#define XIIC_TX_DYN_START_MASK 0x0100 /* 1 = Set dynamic start */
+#define XIIC_TX_DYN_STOP_MASK 0x0200 /* 1 = Set dynamic stop */
+
+/*
+ * The following constants define the register offsets for the Interrupt
+ * registers. There are some holes in the memory map for reserved addresses
+ * to allow other registers to be added and still match the memory map of the
+ * interrupt controller registers
+ */
+#define XIIC_DGIER_OFFSET 0x1C /* Device Global Interrupt Enable Register */
+#define XIIC_IISR_OFFSET 0x20 /* Interrupt Status Register */
+#define XIIC_IIER_OFFSET 0x28 /* Interrupt Enable Register */
+#define XIIC_RESETR_OFFSET 0x40 /* Reset Register */
+
+#define XIIC_RESET_MASK 0xAUL
+
+/*
+ * The following constant is used for the device global interrupt enable
+ * register, to enable all interrupts for the device, this is the only bit
+ * in the register
+ */
+#define XIIC_GINTR_ENABLE_MASK 0x80000000UL
+
+#define xiic_tx_space(i2c) ((i2c)->tx_msg->len - (i2c)->tx_pos)
+#define xiic_rx_space(i2c) ((i2c)->rx_msg->len - (i2c)->rx_pos)
+
+static void xiic_start_xfer(struct xiic_i2c *i2c);
+static void __xiic_start_xfer(struct xiic_i2c *i2c);
+
+static inline void xiic_setreg8(struct xiic_i2c *i2c, int reg, u8 value)
+{
+ iowrite8(value, i2c->base + reg);
+}
+
+static inline u8 xiic_getreg8(struct xiic_i2c *i2c, int reg)
+{
+ return ioread8(i2c->base + reg);
+}
+
+static inline void xiic_setreg16(struct xiic_i2c *i2c, int reg, u16 value)
+{
+ iowrite16(value, i2c->base + reg);
+}
+
+static inline void xiic_setreg32(struct xiic_i2c *i2c, int reg, int value)
+{
+ iowrite32(value, i2c->base + reg);
+}
+
+static inline int xiic_getreg32(struct xiic_i2c *i2c, int reg)
+{
+ return ioread32(i2c->base + reg);
+}
+
+static inline void xiic_irq_dis(struct xiic_i2c *i2c, u32 mask)
+{
+ u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+ xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier & ~mask);
+}
+
+static inline void xiic_irq_en(struct xiic_i2c *i2c, u32 mask)
+{
+ u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+ xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier | mask);
+}
+
+static inline void xiic_irq_clr(struct xiic_i2c *i2c, u32 mask)
+{
+ u32 isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+ xiic_setreg32(i2c, XIIC_IISR_OFFSET, isr & mask);
+}
+
+static inline void xiic_irq_clr_en(struct xiic_i2c *i2c, u32 mask)
+{
+ xiic_irq_clr(i2c, mask);
+ xiic_irq_en(i2c, mask);
+}
+
+static void xiic_clear_rx_fifo(struct xiic_i2c *i2c)
+{
+ u8 sr;
+ for (sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
+ !(sr & XIIC_SR_RX_FIFO_EMPTY_MASK);
+ sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET))
+ xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
+}
+
+static void xiic_reinit(struct xiic_i2c *i2c)
+{
+ xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
+
+ /* Set receive Fifo depth to maximum (zero based). */
+ xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, IIC_RX_FIFO_DEPTH - 1);
+
+ /* Reset Tx Fifo. */
+ xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_TX_FIFO_RESET_MASK);
+
+ /* Enable IIC Device, remove Tx Fifo reset & disable general call. */
+ xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_ENABLE_DEVICE_MASK);
+
+ /* make sure RX fifo is empty */
+ xiic_clear_rx_fifo(i2c);
+
+ /* Enable interrupts */
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
+
+ xiic_irq_clr_en(i2c, XIIC_INTR_AAS_MASK | XIIC_INTR_ARB_LOST_MASK);
+}
+
+static void xiic_deinit(struct xiic_i2c *i2c)
+{
+ u8 cr;
+
+ xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
+
+ /* Disable IIC Device. */
+ cr = xiic_getreg8(i2c, XIIC_CR_REG_OFFSET);
+ xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, cr & ~XIIC_CR_ENABLE_DEVICE_MASK);
+}
+
+static void xiic_read_rx(struct xiic_i2c *i2c)
+{
+ u8 bytes_in_fifo;
+ int i;
+
+ bytes_in_fifo = xiic_getreg8(i2c, XIIC_RFO_REG_OFFSET) + 1;
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry, bytes in fifo: %d, msg: %d"
+ ", SR: 0x%x, CR: 0x%x\n",
+ __func__, bytes_in_fifo, xiic_rx_space(i2c),
+ xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
+ xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
+
+ if (bytes_in_fifo > xiic_rx_space(i2c))
+ bytes_in_fifo = xiic_rx_space(i2c);
+
+ for (i = 0; i < bytes_in_fifo; i++)
+ i2c->rx_msg->buf[i2c->rx_pos++] =
+ xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
+
+ xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET,
+ (xiic_rx_space(i2c) > IIC_RX_FIFO_DEPTH) ?
+ IIC_RX_FIFO_DEPTH - 1 : xiic_rx_space(i2c) - 1);
+}
+
+static int xiic_tx_fifo_space(struct xiic_i2c *i2c)
+{
+ /* return the actual space left in the FIFO */
+ return IIC_TX_FIFO_DEPTH - xiic_getreg8(i2c, XIIC_TFO_REG_OFFSET) - 1;
+}
+
+static void xiic_fill_tx_fifo(struct xiic_i2c *i2c)
+{
+ u8 fifo_space = xiic_tx_fifo_space(i2c);
+ int len = xiic_tx_space(i2c);
+
+ len = (len > fifo_space) ? fifo_space : len;
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry, len: %d, fifo space: %d\n",
+ __func__, len, fifo_space);
+
+ while (len--) {
+ u16 data = i2c->tx_msg->buf[i2c->tx_pos++];
+ if ((xiic_tx_space(i2c) == 0) && (i2c->nmsgs == 1)) {
+ /* last message in transfer -> STOP */
+ data |= XIIC_TX_DYN_STOP_MASK;
+ dev_dbg(i2c->adap.dev.parent, "%s TX STOP\n", __func__);
+
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
+ } else
+ xiic_setreg8(i2c, XIIC_DTR_REG_OFFSET, data);
+ }
+}
+
+static void xiic_wakeup(struct xiic_i2c *i2c, int code)
+{
+ i2c->tx_msg = NULL;
+ i2c->rx_msg = NULL;
+ i2c->nmsgs = 0;
+ i2c->state = code;
+ wake_up(&i2c->wait);
+}
+
+static void xiic_process(struct xiic_i2c *i2c)
+{
+ u32 pend, isr, ier;
+ u32 clr = 0;
+
+ /* Get the interrupt Status from the IPIF. There is no clearing of
+ * interrupts in the IPIF. Interrupts must be cleared at the source.
+ * To find which interrupts are pending; AND interrupts pending with
+ * interrupts masked.
+ */
+ isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+ ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+ pend = isr & ier;
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry, IER: 0x%x, ISR: 0x%x, "
+ "pend: 0x%x, SR: 0x%x, msg: %p, nmsgs: %d\n",
+ __func__, ier, isr, pend, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
+ i2c->tx_msg, i2c->nmsgs);
+
+ /* Do not processes a devices interrupts if the device has no
+ * interrupts pending
+ */
+ if (!pend)
+ return;
+
+ /* Service requesting interrupt */
+ if ((pend & XIIC_INTR_ARB_LOST_MASK) ||
+ ((pend & XIIC_INTR_TX_ERROR_MASK) &&
+ !(pend & XIIC_INTR_RX_FULL_MASK))) {
+ /* bus arbritration lost, or...
+ * Transmit error _OR_ RX completed
+ * if this happens when RX_FULL is not set
+ * this is probably a TX error
+ */
+
+ dev_dbg(i2c->adap.dev.parent, "%s error\n", __func__);
+
+ /* dynamic mode seem to suffer from problems if we just flushes
+ * fifos and the next message is a TX with len 0 (only addr)
+ * reset the IP instead of just flush fifos
+ */
+ xiic_reinit(i2c);
+
+ if (i2c->tx_msg)
+ xiic_wakeup(i2c, STATE_ERROR);
+
+ } else if (pend & XIIC_INTR_RX_FULL_MASK) {
+ /* Receive register/FIFO is full */
+
+ clr = XIIC_INTR_RX_FULL_MASK;
+ if (!i2c->rx_msg) {
+ dev_dbg(i2c->adap.dev.parent,
+ "%s unexpexted RX IRQ\n", __func__);
+ xiic_clear_rx_fifo(i2c);
+ goto out;
+ }
+
+ xiic_read_rx(i2c);
+ if (xiic_rx_space(i2c) == 0) {
+ /* this is the last part of the message */
+ i2c->rx_msg = NULL;
+
+ /* also clear TX error if there (RX complete) */
+ clr |= (isr & XIIC_INTR_TX_ERROR_MASK);
+
+ dev_dbg(i2c->adap.dev.parent,
+ "%s end of message, nmsgs: %d\n",
+ __func__, i2c->nmsgs);
+
+ /* send next message if this wasn't the last,
+ * otherwise the transfer will be finialise when
+ * receiving the bus not busy interrupt
+ */
+ if (i2c->nmsgs > 1) {
+ i2c->nmsgs--;
+ i2c->tx_msg++;
+ dev_dbg(i2c->adap.dev.parent,
+ "%s will start next...\n", __func__);
+
+ __xiic_start_xfer(i2c);
+ }
+ }
+ } else if (pend & XIIC_INTR_BNB_MASK) {
+ /* IIC bus has transitioned to not busy */
+ clr = XIIC_INTR_BNB_MASK;
+
+ /* The bus is not busy, disable BusNotBusy interrupt */
+ xiic_irq_dis(i2c, XIIC_INTR_BNB_MASK);
+
+ if (!i2c->tx_msg)
+ goto out;
+
+ if ((i2c->nmsgs == 1) && !i2c->rx_msg &&
+ xiic_tx_space(i2c) == 0)
+ xiic_wakeup(i2c, STATE_DONE);
+ else
+ xiic_wakeup(i2c, STATE_ERROR);
+
+ } else if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
+ /* Transmit register/FIFO is empty or ½ empty */
+
+ clr = pend &
+ (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK);
+
+ if (!i2c->tx_msg) {
+ dev_dbg(i2c->adap.dev.parent,
+ "%s unexpexted TX IRQ\n", __func__);
+ goto out;
+ }
+
+ xiic_fill_tx_fifo(i2c);
+
+ /* current message sent and there is space in the fifo */
+ if (!xiic_tx_space(i2c) && xiic_tx_fifo_space(i2c) >= 2) {
+ dev_dbg(i2c->adap.dev.parent,
+ "%s end of message sent, nmsgs: %d\n",
+ __func__, i2c->nmsgs);
+ if (i2c->nmsgs > 1) {
+ i2c->nmsgs--;
+ i2c->tx_msg++;
+ __xiic_start_xfer(i2c);
+ } else {
+ xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
+
+ dev_dbg(i2c->adap.dev.parent,
+ "%s Got TX IRQ but no more to do...\n",
+ __func__);
+ }
+ } else if (!xiic_tx_space(i2c) && (i2c->nmsgs == 1))
+ /* current frame is sent and is last,
+ * make sure to disable tx half
+ */
+ xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
+ } else {
+ /* got IRQ which is not acked */
+ dev_err(i2c->adap.dev.parent, "%s Got unexpected IRQ\n",
+ __func__);
+ clr = pend;
+ }
+out:
+ dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr);
+
+ xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr);
+}
+
+static int xiic_bus_busy(struct xiic_i2c *i2c)
+{
+ u8 sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
+
+ return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0;
+}
+
+static int xiic_busy(struct xiic_i2c *i2c)
+{
+ int tries = 3;
+ int err;
+
+ if (i2c->tx_msg)
+ return -EBUSY;
+
+ /* for instance if previous transfer was terminated due to TX error
+ * it might be that the bus is on it's way to become available
+ * give it at most 3 ms to wake
+ */
+ err = xiic_bus_busy(i2c);
+ while (err && tries--) {
+ mdelay(1);
+ err = xiic_bus_busy(i2c);
+ }
+
+ return err;
+}
+
+static void xiic_start_recv(struct xiic_i2c *i2c)
+{
+ u8 rx_watermark;
+ struct i2c_msg *msg = i2c->rx_msg = i2c->tx_msg;
+
+ /* Clear and enable Rx full interrupt. */
+ xiic_irq_clr_en(i2c, XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK);
+
+ /* we want to get all but last byte, because the TX_ERROR IRQ is used
+ * to inidicate error ACK on the address, and negative ack on the last
+ * received byte, so to not mix them receive all but last.
+ * In the case where there is only one byte to receive
+ * we can check if ERROR and RX full is set at the same time
+ */
+ rx_watermark = msg->len;
+ if (rx_watermark > IIC_RX_FIFO_DEPTH)
+ rx_watermark = IIC_RX_FIFO_DEPTH;
+ xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, rx_watermark - 1);
+
+ if (!(msg->flags & I2C_M_NOSTART))
+ /* write the address */
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
+ (msg->addr << 1) | XIIC_READ_OPERATION |
+ XIIC_TX_DYN_START_MASK);
+
+ xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
+
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
+ msg->len | ((i2c->nmsgs == 1) ? XIIC_TX_DYN_STOP_MASK : 0));
+ if (i2c->nmsgs == 1)
+ /* very last, enable bus not busy as well */
+ xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
+
+ /* the message is tx:ed */
+ i2c->tx_pos = msg->len;
+}
+
+static void xiic_start_send(struct xiic_i2c *i2c)
+{
+ struct i2c_msg *msg = i2c->tx_msg;
+
+ xiic_irq_clr(i2c, XIIC_INTR_TX_ERROR_MASK);
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, len: %d, "
+ "ISR: 0x%x, CR: 0x%x\n",
+ __func__, msg, msg->len, xiic_getreg32(i2c, XIIC_IISR_OFFSET),
+ xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
+
+ if (!(msg->flags & I2C_M_NOSTART)) {
+ /* write the address */
+ u16 data = ((msg->addr << 1) & 0xfe) | XIIC_WRITE_OPERATION |
+ XIIC_TX_DYN_START_MASK;
+ if ((i2c->nmsgs == 1) && msg->len == 0)
+ /* no data and last message -> add STOP */
+ data |= XIIC_TX_DYN_STOP_MASK;
+
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
+ }
+
+ xiic_fill_tx_fifo(i2c);
+
+ /* Clear any pending Tx empty, Tx Error and then enable them. */
+ xiic_irq_clr_en(i2c, XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_ERROR_MASK |
+ XIIC_INTR_BNB_MASK);
+}
+
+static irqreturn_t xiic_isr(int irq, void *dev_id)
+{
+ struct xiic_i2c *i2c = dev_id;
+
+ spin_lock(&i2c->lock);
+ /* disable interrupts globally */
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0);
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry\n", __func__);
+
+ xiic_process(i2c);
+
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
+ spin_unlock(&i2c->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void __xiic_start_xfer(struct xiic_i2c *i2c)
+{
+ int first = 1;
+ int fifo_space = xiic_tx_fifo_space(i2c);
+ dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, fifos space: %d\n",
+ __func__, i2c->tx_msg, fifo_space);
+
+ if (!i2c->tx_msg)
+ return;
+
+ i2c->rx_pos = 0;
+ i2c->tx_pos = 0;
+ i2c->state = STATE_START;
+ while ((fifo_space >= 2) && (first || (i2c->nmsgs > 1))) {
+ if (!first) {
+ i2c->nmsgs--;
+ i2c->tx_msg++;
+ i2c->tx_pos = 0;
+ } else
+ first = 0;
+
+ if (i2c->tx_msg->flags & I2C_M_RD) {
+ /* we dont date putting several reads in the FIFO */
+ xiic_start_recv(i2c);
+ return;
+ } else {
+ xiic_start_send(i2c);
+ if (xiic_tx_space(i2c) != 0) {
+ /* the message could not be completely sent */
+ break;
+ }
+ }
+
+ fifo_space = xiic_tx_fifo_space(i2c);
+ }
+
+ /* there are more messages or the current one could not be completely
+ * put into the FIFO, also enable the half empty interrupt
+ */
+ if (i2c->nmsgs > 1 || xiic_tx_space(i2c))
+ xiic_irq_clr_en(i2c, XIIC_INTR_TX_HALF_MASK);
+
+}
+
+static void xiic_start_xfer(struct xiic_i2c *i2c)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i2c->lock, flags);
+ xiic_reinit(i2c);
+ /* disable interrupts globally */
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0);
+ spin_unlock_irqrestore(&i2c->lock, flags);
+
+ __xiic_start_xfer(i2c);
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
+}
+
+static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct xiic_i2c *i2c = i2c_get_adapdata(adap);
+ int err;
+
+ dev_dbg(adap->dev.parent, "%s entry SR: 0x%x\n", __func__,
+ xiic_getreg8(i2c, XIIC_SR_REG_OFFSET));
+
+ err = xiic_busy(i2c);
+ if (err)
+ return err;
+
+ i2c->tx_msg = msgs;
+ i2c->nmsgs = num;
+
+ xiic_start_xfer(i2c);
+
+ if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
+ (i2c->state == STATE_DONE), HZ))
+ return (i2c->state == STATE_DONE) ? num : -EIO;
+ else {
+ i2c->tx_msg = NULL;
+ i2c->rx_msg = NULL;
+ i2c->nmsgs = 0;
+ return -ETIMEDOUT;
+ }
+}
+
+static u32 xiic_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm xiic_algorithm = {
+ .master_xfer = xiic_xfer,
+ .functionality = xiic_func,
+};
+
+static struct i2c_adapter xiic_adapter = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .algo = &xiic_algorithm,
+};
+
+
+static int __devinit xiic_i2c_probe(struct platform_device *pdev)
+{
+ struct xiic_i2c *i2c;
+ struct xiic_i2c_platform_data *pdata;
+ struct resource *res;
+ int ret, irq;
+ u8 i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ goto resource_missing;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ goto resource_missing;
+
+ pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "Memory region busy\n");
+ ret = -EBUSY;
+ goto request_mem_failed;
+ }
+
+ i2c->base = ioremap(res->start, resource_size(res));
+ if (!i2c->base) {
+ dev_err(&pdev->dev, "Unable to map registers\n");
+ ret = -EIO;
+ goto map_failed;
+ }
+
+ /* hook up driver to tree */
+ platform_set_drvdata(pdev, i2c);
+ i2c->adap = xiic_adapter;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ i2c->adap.dev.parent = &pdev->dev;
+
+ xiic_reinit(i2c);
+
+ spin_lock_init(&i2c->lock);
+ init_waitqueue_head(&i2c->wait);
+ ret = request_irq(irq, xiic_isr, 0, pdev->name, i2c);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ goto request_irq_failed;
+ }
+
+ /* add i2c adapter to i2c tree */
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add adapter\n");
+ goto add_adapter_failed;
+ }
+
+ /* add in known devices to the bus */
+ for (i = 0; i < pdata->num_devices; i++)
+ i2c_new_device(&i2c->adap, pdata->devices + i);
+
+ return 0;
+
+add_adapter_failed:
+ free_irq(irq, i2c);
+request_irq_failed:
+ xiic_deinit(i2c);
+ iounmap(i2c->base);
+map_failed:
+ release_mem_region(res->start, resource_size(res));
+request_mem_failed:
+ kfree(i2c);
+
+ return ret;
+resource_missing:
+ dev_err(&pdev->dev, "IRQ or Memory resource is missing\n");
+ return -ENOENT;
+}
+
+static int __devexit xiic_i2c_remove(struct platform_device* pdev)
+{
+ struct xiic_i2c *i2c = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ /* remove adapter & data */
+ i2c_del_adapter(&i2c->adap);
+
+ xiic_deinit(i2c);
+
+ platform_set_drvdata(pdev, NULL);
+
+ free_irq(platform_get_irq(pdev, 0), i2c);
+
+ iounmap(i2c->base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(i2c);
+
+ return 0;
+}
+
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:"DRIVER_NAME);
+
+static struct platform_driver xiic_i2c_driver = {
+ .probe = xiic_i2c_probe,
+ .remove = __devexit_p(xiic_i2c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init xiic_i2c_init(void)
+{
+ return platform_driver_register(&xiic_i2c_driver);
+}
+
+static void __exit xiic_i2c_exit(void)
+{
+ platform_driver_unregister(&xiic_i2c_driver);
+}
+
+module_init(xiic_i2c_init);
+module_exit(xiic_i2c_exit);
+
+MODULE_AUTHOR("info@mocean-labs.com");
+MODULE_DESCRIPTION("Xilinx I2C bus driver");
+MODULE_LICENSE("GPL v2");