aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/i2c-pxa.c45
-rw-r--r--drivers/input/keyboard/pxa27x_keyboard.c25
-rw-r--r--drivers/leds/Kconfig6
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-cm-x270.c122
-rw-r--r--drivers/mmc/host/pxamci.c43
-rw-r--r--drivers/mmc/host/pxamci.h14
-rw-r--r--drivers/net/irda/pxaficp_ir.c51
-rw-r--r--drivers/net/smc91x.c55
-rw-r--r--drivers/net/smc91x.h64
-rw-r--r--drivers/pcmcia/Makefile1
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x270.c175
-rw-r--r--drivers/pcmcia/pxa2xx_lubbock.c31
-rw-r--r--drivers/pcmcia/pxa2xx_mainstone.c18
-rw-r--r--drivers/serial/pxa.c163
-rw-r--r--drivers/serial/serial_core.c18
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c68
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.h1
-rw-r--r--drivers/video/pxafb.c36
-rw-r--r--drivers/video/pxafb.h1
20 files changed, 651 insertions, 287 deletions
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index bb5466b27b5..00fad11733a 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -31,6 +31,8 @@
#include <linux/interrupt.h>
#include <linux/i2c-pxa.h>
#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/irq.h>
@@ -48,6 +50,7 @@ struct pxa_i2c {
unsigned int slave_addr;
struct i2c_adapter adap;
+ struct clk *clk;
#ifdef CONFIG_I2C_PXA_SLAVE
struct i2c_slave_client *slave;
#endif
@@ -869,6 +872,12 @@ static int i2c_pxa_probe(struct platform_device *dev)
sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
+ i2c->clk = clk_get(&dev->dev, "I2CCLK");
+ if (IS_ERR(i2c->clk)) {
+ ret = PTR_ERR(i2c->clk);
+ goto eclk;
+ }
+
i2c->reg_base = ioremap(res->start, res_len(res));
if (!i2c->reg_base) {
ret = -EIO;
@@ -889,22 +898,19 @@ static int i2c_pxa_probe(struct platform_device *dev)
}
#endif
+ clk_enable(i2c->clk);
+#ifdef CONFIG_PXA27x
switch (dev->id) {
case 0:
-#ifdef CONFIG_PXA27x
pxa_gpio_mode(GPIO117_I2CSCL_MD);
pxa_gpio_mode(GPIO118_I2CSDA_MD);
-#endif
- pxa_set_cken(CKEN_I2C, 1);
break;
-#ifdef CONFIG_PXA27x
case 1:
local_irq_disable();
PCFR |= PCFR_PI2CEN;
local_irq_enable();
- pxa_set_cken(CKEN_PWRI2C, 1);
-#endif
}
+#endif
ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
i2c->adap.name, i2c);
@@ -948,19 +954,18 @@ static int i2c_pxa_probe(struct platform_device *dev)
eadapt:
free_irq(irq, i2c);
ereqirq:
- switch (dev->id) {
- case 0:
- pxa_set_cken(CKEN_I2C, 0);
- break;
+ clk_disable(i2c->clk);
+
#ifdef CONFIG_PXA27x
- case 1:
- pxa_set_cken(CKEN_PWRI2C, 0);
+ if (dev->id == 1) {
local_irq_disable();
PCFR &= ~PCFR_PI2CEN;
local_irq_enable();
-#endif
}
+#endif
eremap:
+ clk_put(i2c->clk);
+eclk:
kfree(i2c);
emalloc:
release_mem_region(res->start, res_len(res));
@@ -975,18 +980,18 @@ static int i2c_pxa_remove(struct platform_device *dev)
i2c_del_adapter(&i2c->adap);
free_irq(i2c->irq, i2c);
- switch (dev->id) {
- case 0:
- pxa_set_cken(CKEN_I2C, 0);
- break;
+
+ clk_disable(i2c->clk);
+ clk_put(i2c->clk);
+
#ifdef CONFIG_PXA27x
- case 1:
- pxa_set_cken(CKEN_PWRI2C, 0);
+ if (dev->id == 1) {
local_irq_disable();
PCFR &= ~PCFR_PI2CEN;
local_irq_enable();
-#endif
}
+#endif
+
release_mem_region(i2c->iobase, i2c->iosize);
kfree(i2c);
diff --git a/drivers/input/keyboard/pxa27x_keyboard.c b/drivers/input/keyboard/pxa27x_keyboard.c
index ebe5eacf299..b7061aa3881 100644
--- a/drivers/input/keyboard/pxa27x_keyboard.c
+++ b/drivers/input/keyboard/pxa27x_keyboard.c
@@ -23,6 +23,8 @@
#include <linux/input.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -40,6 +42,8 @@
col/2 == 2 ? KPASMKP2 : KPASMKP3)
#define KPASMKPx_MKC(row, col) (1 << (row + 16 * (col % 2)))
+static struct clk *pxakbd_clk;
+
static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
@@ -104,7 +108,7 @@ static int pxakbd_open(struct input_dev *dev)
KPREC = 0x7F;
/* Enable unit clock */
- pxa_set_cken(CKEN_KEYPAD, 1);
+ clk_enable(pxakbd_clk);
return 0;
}
@@ -112,7 +116,7 @@ static int pxakbd_open(struct input_dev *dev)
static void pxakbd_close(struct input_dev *dev)
{
/* Disable clock unit */
- pxa_set_cken(CKEN_KEYPAD, 0);
+ clk_disable(pxakbd_clk);
}
#ifdef CONFIG_PM
@@ -140,7 +144,8 @@ static int pxakbd_resume(struct platform_device *pdev)
KPREC = pdata->reg_kprec;
/* Enable unit clock */
- pxa_set_cken(CKEN_KEYPAD, 1);
+ clk_disable(pxakbd_clk);
+ clk_enable(pxakbd_clk);
}
mutex_unlock(&input_dev->mutex);
@@ -158,11 +163,18 @@ static int __devinit pxakbd_probe(struct platform_device *pdev)
struct input_dev *input_dev;
int i, row, col, error;
+ pxakbd_clk = clk_get(&pdev->dev, "KBDCLK");
+ if (IS_ERR(pxakbd_clk)) {
+ error = PTR_ERR(pxakbd_clk);
+ goto err_clk;
+ }
+
/* Create and register the input driver. */
input_dev = input_allocate_device();
if (!input_dev) {
printk(KERN_ERR "Cannot request keypad device\n");
- return -ENOMEM;
+ error = -ENOMEM;
+ goto err_alloc;
}
input_dev->name = DRIVER_NAME;
@@ -185,7 +197,6 @@ static int __devinit pxakbd_probe(struct platform_device *pdev)
DRIVER_NAME, pdev);
if (error) {
printk(KERN_ERR "Cannot request keypad IRQ\n");
- pxa_set_cken(CKEN_KEYPAD, 0);
goto err_free_dev;
}
@@ -217,6 +228,9 @@ static int __devinit pxakbd_probe(struct platform_device *pdev)
free_irq(IRQ_KEYPAD, pdev);
err_free_dev:
input_free_device(input_dev);
+ err_alloc:
+ clk_put(pxakbd_clk);
+ err_clk:
return error;
}
@@ -226,6 +240,7 @@ static int __devexit pxakbd_remove(struct platform_device *pdev)
input_unregister_device(input_dev);
free_irq(IRQ_KEYPAD, pdev);
+ clk_put(pxakbd_clk);
platform_set_drvdata(pdev, NULL);
return 0;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3cb23210b91..257b44094e4 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -108,6 +108,12 @@ config LEDS_GPIO
outputs. To be useful the particular board must have LEDs
and they must be connected to the GPIO lines.
+config LEDS_CM_X270
+ tristate "LED Support for the CM-X270 LEDs"
+ depends on LEDS_CLASS && MACH_ARMCORE
+ help
+ This option enables support for the CM-X270 LEDs.
+
comment "LED Triggers"
config LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d2ca1abbc3d..a60de1b46c2 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
new file mode 100644
index 00000000000..9aebef02a97
--- /dev/null
+++ b/drivers/leds/leds-cm-x270.c
@@ -0,0 +1,122 @@
+/*
+ * drivers/leds/leds-cm-x270.c
+ *
+ * Copyright 2007 CompuLab Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on leds-corgi.c
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+
+#define GPIO_RED_LED (93)
+#define GPIO_GREEN_LED (94)
+
+static void cmx270_red_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
+ else
+ GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
+}
+
+static void cmx270_green_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ if (value)
+ GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
+ else
+ GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
+}
+
+static struct led_classdev cmx270_red_led = {
+ .name = "cm-x270:red",
+ .default_trigger = "nand-disk",
+ .brightness_set = cmx270_red_set,
+};
+
+static struct led_classdev cmx270_green_led = {
+ .name = "cm-x270:green",
+ .default_trigger = "heartbeat",
+ .brightness_set = cmx270_green_set,
+};
+
+#ifdef CONFIG_PM
+static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
+{
+ led_classdev_suspend(&cmx270_red_led);
+ led_classdev_suspend(&cmx270_green_led);
+ return 0;
+}
+
+static int cmx270led_resume(struct platform_device *dev)
+{
+ led_classdev_resume(&cmx270_red_led);
+ led_classdev_resume(&cmx270_green_led);
+ return 0;
+}
+#endif
+
+static int cmx270led_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
+ if (ret < 0)
+ return ret;
+
+ ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
+ if (ret < 0)
+ led_classdev_unregister(&cmx270_red_led);
+
+ return ret;
+}
+
+static int cmx270led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&cmx270_red_led);
+ led_classdev_unregister(&cmx270_green_led);
+ return 0;
+}
+
+static struct platform_driver cmx270led_driver = {
+ .probe = cmx270led_probe,
+ .remove = cmx270led_remove,
+#ifdef CONFIG_PM
+ .suspend = cmx270led_suspend,
+ .resume = cmx270led_resume,
+#endif
+ .driver = {
+ .name = "cm-x270-led",
+ },
+};
+
+static int __init cmx270led_init(void)
+{
+ return platform_driver_register(&cmx270led_driver);
+}
+
+static void __exit cmx270led_exit(void)
+{
+ platform_driver_unregister(&cmx270led_driver);
+}
+
+module_init(cmx270led_init);
+module_exit(cmx270led_exit);
+
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("CM-x270 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 657901eecfc..0601e01aa2c 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -23,6 +23,8 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/mmc/host.h>
#include <asm/dma.h>
@@ -44,6 +46,8 @@ struct pxamci_host {
spinlock_t lock;
struct resource *res;
void __iomem *base;
+ struct clk *clk;
+ unsigned long clkrate;
int irq;
int dma;
unsigned int clkrt;
@@ -119,7 +123,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
writel(nob, host->base + MMC_NOB);
writel(data->blksz, host->base + MMC_BLKLEN);
- clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
+ clks = (unsigned long long)data->timeout_ns * host->clkrate;
do_div(clks, 1000000000UL);
timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
writel((timeout + 255) / 256, host->base + MMC_RDTO);
@@ -365,18 +369,25 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct pxamci_host *host = mmc_priv(mmc);
if (ios->clock) {
- unsigned int clk = CLOCKRATE / ios->clock;
- if (CLOCKRATE / clk > ios->clock)
+ unsigned long rate = host->clkrate;
+ unsigned int clk = rate / ios->clock;
+
+ /*
+ * clk might result in a lower divisor than we
+ * desire. check for that condition and adjust
+ * as appropriate.
+ */
+ if (rate / clk > ios->clock)
clk <<= 1;
host->clkrt = fls(clk) - 1;
- pxa_set_cken(CKEN_MMC, 1);
+ clk_enable(host->clk);
/*
* we write clkrt on the next command
*/
} else {
pxamci_stop_clock(host);
- pxa_set_cken(CKEN_MMC, 0);
+ clk_disable(host->clk);
}
if (host->power_mode != ios->power_mode) {
@@ -462,8 +473,6 @@ static int pxamci_probe(struct platform_device *pdev)
}
mmc->ops = &pxamci_ops;
- mmc->f_min = CLOCKRATE_MIN;
- mmc->f_max = CLOCKRATE_MAX;
/*
* We can do SG-DMA, but we don't because we never know how much
@@ -490,6 +499,22 @@ static int pxamci_probe(struct platform_device *pdev)
host->mmc = mmc;
host->dma = -1;
host->pdata = pdev->dev.platform_data;
+
+ host->clk = clk_get(&pdev->dev, "MMCCLK");
+ if (IS_ERR(host->clk)) {
+ ret = PTR_ERR(host->clk);
+ host->clk = NULL;
+ goto out;
+ }
+
+ host->clkrate = clk_get_rate(host->clk);
+
+ /*
+ * Calculate minimum clock rate, rounding up.
+ */
+ mmc->f_min = (host->clkrate + 63) / 64;
+ mmc->f_max = host->clkrate;
+
mmc->ocr_avail = host->pdata ?
host->pdata->ocr_mask :
MMC_VDD_32_33|MMC_VDD_33_34;
@@ -554,6 +579,8 @@ static int pxamci_probe(struct platform_device *pdev)
iounmap(host->base);
if (host->sg_cpu)
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+ if (host->clk)
+ clk_put(host->clk);
}
if (mmc)
mmc_free_host(mmc);
@@ -588,6 +615,8 @@ static int pxamci_remove(struct platform_device *pdev)
iounmap(host->base);
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+ clk_put(host->clk);
+
release_resource(host->res);
mmc_free_host(mmc);
diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h
index 3153e779d46..748c7706f23 100644
--- a/drivers/mmc/host/pxamci.h
+++ b/drivers/mmc/host/pxamci.h
@@ -88,17 +88,3 @@
#define MMC_RXFIFO 0x0040 /* 8 bit */
#define MMC_TXFIFO 0x0044 /* 8 bit */
-
-/*
- * The base MMC clock rate
- */
-#ifdef CONFIG_PXA27x
-#define CLOCKRATE_MIN 304688
-#define CLOCKRATE_MAX 19500000
-#else
-#define CLOCKRATE_MIN 312500
-#define CLOCKRATE_MAX 20000000
-#endif
-
-#define CLOCKRATE CLOCKRATE_MAX
-
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 55ff0fbe525..8c09344f58d 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -23,6 +23,7 @@
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
+#include <linux/clk.h>
#include <net/irda/irda.h>
#include <net/irda/irmod.h>
@@ -87,8 +88,30 @@ struct pxa_irda {
struct device *dev;
struct pxaficp_platform_data *pdata;
+ struct clk *fir_clk;
+ struct clk *sir_clk;
+ struct clk *cur_clk;
};
+static inline void pxa_irda_disable_clk(struct pxa_irda *si)
+{
+ if (si->cur_clk)
+ clk_disable(si->cur_clk);
+ si->cur_clk = NULL;
+}
+
+static inline void pxa_irda_enable_firclk(struct pxa_irda *si)
+{
+ si->cur_clk = si->fir_clk;
+ clk_enable(si->fir_clk);
+}
+
+static inline void pxa_irda_enable_sirclk(struct pxa_irda *si)
+{
+ si->cur_clk = si->sir_clk;
+ clk_enable(si->sir_clk);
+}
+
#define IS_FIR(si) ((si)->speed >= 4000000)
#define IRDA_FRAME_SIZE_LIMIT 2047
@@ -134,7 +157,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
DCSR(si->rxdma) &= ~DCSR_RUN;
/* disable FICP */
ICCR0 = 0;
- pxa_set_cken(CKEN_FICP, 0);
+ pxa_irda_disable_clk(si);
/* set board transceiver to SIR mode */
si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
@@ -144,7 +167,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
pxa_gpio_mode(GPIO47_STTXD_MD);
/* enable the STUART clock */
- pxa_set_cken(CKEN_STUART, 1);
+ pxa_irda_enable_sirclk(si);
}
/* disable STUART first */
@@ -169,7 +192,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
/* disable STUART */
STIER = 0;
STISR = 0;
- pxa_set_cken(CKEN_STUART, 0);
+ pxa_irda_disable_clk(si);
/* disable FICP first */
ICCR0 = 0;
@@ -182,7 +205,7 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
pxa_gpio_mode(GPIO47_ICPTXD_MD);
/* enable the FICP clock */
- pxa_set_cken(CKEN_FICP, 1);
+ pxa_irda_enable_firclk(si);
si->speed = speed;
pxa_irda_fir_dma_rx_start(si);
@@ -592,16 +615,15 @@ static void pxa_irda_shutdown(struct pxa_irda *si)
STIER = 0;
/* disable STUART SIR mode */
STISR = 0;
- /* disable the STUART clock */
- pxa_set_cken(CKEN_STUART, 0);
/* disable DMA */
DCSR(si->txdma) &= ~DCSR_RUN;
DCSR(si->rxdma) &= ~DCSR_RUN;
/* disable FICP */
ICCR0 = 0;
- /* disable the FICP clock */
- pxa_set_cken(CKEN_FICP, 0);
+
+ /* disable the STUART or FICP clocks */
+ pxa_irda_disable_clk(si);
DRCMR17 = 0;
DRCMR18 = 0;
@@ -792,6 +814,13 @@ static int pxa_irda_probe(struct platform_device *pdev)
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
+ si->sir_clk = clk_get(&pdev->dev, "UARTCLK");
+ si->fir_clk = clk_get(&pdev->dev, "FICPCLK");
+ if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) {
+ err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk);
+ goto err_mem_4;
+ }
+
/*
* Initialise the SIR buffers
*/
@@ -831,6 +860,10 @@ static int pxa_irda_probe(struct platform_device *pdev)
err_mem_5:
kfree(si->rx_buff.head);
err_mem_4:
+ if (si->sir_clk && !IS_ERR(si->sir_clk))
+ clk_put(si->sir_clk);
+ if (si->fir_clk && !IS_ERR(si->fir_clk))
+ clk_put(si->fir_clk);
free_netdev(dev);
err_mem_3:
release_mem_region(__PREG(FICP), 0x1c);
@@ -850,6 +883,8 @@ static int pxa_irda_remove(struct platform_device *_dev)
unregister_netdev(dev);
kfree(si->tx_buff.head);
kfree(si->rx_buff.head);
+ clk_put(si->fir_clk);
+ clk_put(si->sir_clk);
free_netdev(dev);
}
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 24e610e711e..7da7589d45d 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -173,49 +173,6 @@ MODULE_LICENSE("GPL");
*/
#define MII_DELAY 1
-/* store this information for the driver.. */
-struct smc_local {
- /*
- * If I have to wait until memory is available to send a
- * packet, I will store the skbuff here, until I get the
- * desired memory. Then, I'll send it out and free it.
- */
- struct sk_buff *pending_tx_skb;
- struct tasklet_struct tx_task;
-
- /* version/revision of the SMC91x chip */
- int version;
-
- /* Contains the current active transmission mode */
- int tcr_cur_mode;
-
- /* Contains the current active receive mode */
- int rcr_cur_mode;
-
- /* Contains the current active receive/phy mode */
- int rpc_cur_mode;
- int ctl_rfduplx;
- int ctl_rspeed;
-
- u32 msg_enable;
- u32 phy_type;
- struct mii_if_info mii;
-
- /* work queue */
- struct work_struct phy_configure;
- struct net_device *dev;
- int work_pending;
-
- spinlock_t lock;
-
-#ifdef SMC_USE_PXA_DMA
- /* DMA needs the physical address of the chip */
- u_long physaddr;
-#endif
- void __iomem *base;
- void __iomem *datacs;
-};
-
#if SMC_DEBUG > 0
#define DBG(n, args...) \
do { \
@@ -2215,17 +2172,19 @@ static int smc_drv_probe(struct platform_device *pdev)
goto out_release_attrib;
}
- platform_set_drvdata(pdev, ndev);
- ret = smc_probe(ndev, addr);
- if (ret != 0)
- goto out_iounmap;
#ifdef SMC_USE_PXA_DMA
- else {
+ {
struct smc_local *lp = netdev_priv(ndev);
+ lp->device = &pdev->dev;
lp->physaddr = res->start;
}
#endif
+ platform_set_drvdata(pdev, ndev);
+ ret = smc_probe(ndev, addr);
+ if (ret != 0)
+ goto out_iounmap;
+
smc_request_datacs(pdev, ndev);
return 0;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index af9e6bf5955..729fd28c08b 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -462,6 +462,52 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
#endif
+
+/* store this information for the driver.. */
+struct smc_local {
+ /*
+ * If I have to wait until memory is available to send a
+ * packet, I will store the skbuff here, until I get the
+ * desired memory. Then, I'll send it out and free it.
+ */
+ struct sk_buff *pending_tx_skb;
+ struct tasklet_struct tx_task;
+
+ /* version/revision of the SMC91x chip */
+ int version;
+
+ /* Contains the current active transmission mode */
+ int tcr_cur_mode;
+
+ /* Contains the current active receive mode */
+ int rcr_cur_mode;
+
+ /* Contains the current active receive/phy mode */
+ int rpc_cur_mode;
+ int ctl_rfduplx;
+ int ctl_rspeed;
+
+ u32 msg_enable;
+ u32 phy_type;
+ struct mii_if_info mii;
+
+ /* work queue */
+ struct work_struct phy_configure;
+ struct net_device *dev;
+ int work_pending;
+
+ spinlock_t lock;
+
+#ifdef SMC_USE_PXA_DMA
+ /* DMA needs the physical address of the chip */
+ u_long physaddr;
+ struct device *device;
+#endif
+ void __iomem *base;
+ void __iomem *datacs;
+};
+
+
#ifdef SMC_USE_PXA_DMA
/*
* Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
@@ -476,11 +522,12 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
#ifdef SMC_insl
#undef SMC_insl
#define SMC_insl(a, r, p, l) \
- smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l)
+ smc_pxa_dma_insl(a, lp, r, dev->dma, p, l)
static inline void
-smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
+smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
u_char *buf, int len)
{
+ u_long physaddr = lp->physaddr;
dma_addr_t dmabuf;
/* fallback if no DMA available */
@@ -497,7 +544,7 @@ smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
}
len *= 4;
- dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
DCSR(dma) = DCSR_NODESC;
DTADR(dma) = dmabuf;
DSADR(dma) = physaddr + reg;
@@ -507,18 +554,19 @@ smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
while (!(DCSR(dma) & DCSR_STOPSTATE))
cpu_relax();
DCSR(dma) = 0;
- dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
}
#endif
#ifdef SMC_insw
#undef SMC_insw
#define SMC_insw(a, r, p, l) \
- smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l)
+ smc_pxa_dma_insw(a, lp, r, dev->dma, p, l)
static inline void
-smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
+smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
u_char *buf, int len)
{
+ u_long physaddr = lp->physaddr;
dma_addr_t dmabuf;
/* fallback if no DMA available */
@@ -535,7 +583,7 @@ smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
}
len *= 2;
- dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
DCSR(dma) = DCSR_NODESC;
DTADR(dma) = dmabuf;
DSADR(dma) = physaddr + reg;
@@ -545,7 +593,7 @@ smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
while (!(DCSR(dma) & DCSR_STOPSTATE))
cpu_relax();
DCSR(dma) = 0;
- dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
}
#endif
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 4276965517f..dc7a4cb5d27 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -69,4 +69,5 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o
pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
+pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
new file mode 100644
index 00000000000..fbf2f3a6984
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -0,0 +1,175 @@
+/*
+ * linux/drivers/pcmcia/pxa/pxa_cm_x270.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Compulab Ltd., 2003, 2007
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <pcmcia/ss.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/cm-x270.h>
+
+#include "soc_common.h"
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
+ { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
+};
+
+static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+ GPIO_bit(GPIO49_nPWE) |
+ GPIO_bit(GPIO50_nPIOR) |
+ GPIO_bit(GPIO51_nPIOW) |
+ GPIO_bit(GPIO85_nPCE_1) |
+ GPIO_bit(GPIO54_nPCE_2);
+
+ pxa_gpio_mode(GPIO48_nPOE_MD);
+ pxa_gpio_mode(GPIO49_nPWE_MD);
+ pxa_gpio_mode(GPIO50_nPIOR_MD);
+ pxa_gpio_mode(GPIO51_nPIOW_MD);
+ pxa_gpio_mode(GPIO85_nPCE_1_MD);
+ pxa_gpio_mode(GPIO54_nPCE_2_MD);
+ pxa_gpio_mode(GPIO55_nPREG_MD);
+ pxa_gpio_mode(GPIO56_nPWAIT_MD);
+ pxa_gpio_mode(GPIO57_nIOIS16_MD);
+
+ /* Reset signal */
+ pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
+ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+
+ set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
+ set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
+
+ /* irq's for slots: */
+ set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
+ set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
+
+ skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+ set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
+ set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
+
+ set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
+ set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
+}
+
+
+static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
+ state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1;
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->vs_3v = 0;
+ state->vs_Xv = 0;
+ state->wrprot = 0; /* not available */
+}
+
+
+static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+ pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
+
+ switch (skt->nr) {
+ case 0:
+ if (state->flags & SS_RESET) {
+ GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+ GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+ udelay(10);
+ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+ }
+ break;
+ case 1:
+ if (state->flags & SS_RESET) {
+ GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+ GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+ udelay(10);
+ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+ }
+ break;
+ }
+
+ pxa_gpio_mode(GPIO49_nPWE_MD);
+
+ return 0;
+}
+
+static void cmx270_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+
+static struct pcmcia_low_level cmx270_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .hw_init = cmx270_pcmcia_hw_init,
+ .hw_shutdown = cmx270_pcmcia_shutdown,
+ .socket_state = cmx270_pcmcia_socket_state,
+ .configure_socket = cmx270_pcmcia_configure_socket,
+ .socket_init = cmx270_pcmcia_socket_init,
+ .socket_suspend = cmx270_pcmcia_socket_suspend,
+ .nr = 2,
+};
+
+static struct platform_device *cmx270_pcmcia_device;
+
+static int __init cmx270_pcmcia_init(void)
+{
+ int ret;
+
+ cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+
+ if (!cmx270_pcmcia_device)
+ return -ENOMEM;
+
+ cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops;
+
+ printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
+ ret = platform_device_add(cmx270_pcmcia_device);
+
+ if (ret)
+ platform_device_put(cmx270_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit cmx270_pcmcia_exit(void)
+{
+ platform_device_unregister(cmx270_pcmcia_device);
+}
+
+module_init(cmx270_pcmcia_init);
+module_exit(cmx270_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("CM-x270 PCMCIA driver");
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 5e9b9a3fd02..1510d6cde3e 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -30,35 +30,6 @@
#include "sa1111_generic.h"
static int
-lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
- /*
- * Setup default state of GPIO outputs
- * before we enable them as outputs.
- */
- GPSR(GPIO48_nPOE) =
- GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) |
- GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) |
- GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
- return sa1111_pcmcia_hw_init(skt);
-}
-
-static int
lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
@@ -230,7 +201,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
static struct pcmcia_low_level lubbock_pcmcia_ops = {
.owner = THIS_MODULE,
- .hw_init = lubbock_pcmcia_hw_init,
+ .hw_init = sa1111_pcmcia_hw_init,
.hw_shutdown = sa1111_pcmcia_hw_shutdown,
.socket_state = sa1111_pcmcia_socket_state,
.configure_socket = lubbock_pcmcia_configure_socket,
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index f6722ba0dd1..6fa5eaaab8a 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -43,24 +43,6 @@ static int mst_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
* Setup default state of GPIO outputs
* before we enable them as outputs.
*/
- GPSR(GPIO48_nPOE) =
- GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) |
- GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) |
- GPIO_bit(GPIO85_nPCE_1) |
- GPIO_bit(GPIO54_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO85_nPCE_1_MD);
- pxa_gpio_mode(GPIO54_nPCE_2_MD);
- pxa_gpio_mode(GPIO79_pSKTSEL_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
skt->irq = (skt->nr == 0) ? MAINSTONE_S0_IRQ : MAINSTONE_S1_IRQ;
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index e9c6cb391a2..af3a011b2b2 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -42,6 +42,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#include <linux/clk.h>
#include <asm/io.h>
#include <asm/hardware.h>
@@ -55,7 +56,7 @@ struct uart_pxa_port {
unsigned char lcr;
unsigned char mcr;
unsigned int lsr_break_flag;
- unsigned int cken;
+ struct clk *clk;
char *name;
};
@@ -351,6 +352,8 @@ static int serial_pxa_startup(struct uart_port *port)
else
up->mcr = 0;
+ up->port.uartclk = clk_get_rate(up->clk);
+
/*
* Allocate the IRQ
*/
@@ -546,9 +549,11 @@ serial_pxa_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
- pxa_set_cken(up->cken, !state);
+
if (!state)
- udelay(1);
+ clk_enable(up->clk);
+ else
+ clk_disable(up->clk);
}
static void serial_pxa_release_port(struct uart_port *port)
@@ -582,7 +587,7 @@ serial_pxa_type(struct uart_port *port)
#ifdef CONFIG_SERIAL_PXA_CONSOLE
-static struct uart_pxa_port serial_pxa_ports[];
+static struct uart_pxa_port *serial_pxa_ports[4];
static struct uart_driver serial_pxa_reg;
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
@@ -632,9 +637,11 @@ static void serial_pxa_console_putchar(struct uart_port *port, int ch)
static void
serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
{
- struct uart_pxa_port *up = &serial_pxa_ports[co->index];
+ struct uart_pxa_port *up = serial_pxa_ports[co->index];
unsigned int ier;
+ clk_enable(up->clk);
+
/*
* First save the IER then disable the interrupts
*/
@@ -649,6 +656,8 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
*/
wait_for_xmitr(up);
serial_out(up, UART_IER, ier);
+
+ clk_disable(up->clk);
}
static int __init
@@ -662,7 +671,9 @@ serial_pxa_console_setup(struct console *co, char *options)
if (co->index == -1 || co->index >= serial_pxa_reg.nr)
co->index = 0;
- up = &serial_pxa_ports[co->index];
+ up = serial_pxa_ports[co->index];
+ if (!up)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -680,15 +691,6 @@ static struct console serial_pxa_console = {
.data = &serial_pxa_reg,
};
-static int __init
-serial_pxa_console_init(void)
-{
- register_console(&serial_pxa_console);
- return 0;
-}
-
-console_initcall(serial_pxa_console_init);
-
#define PXA_CONSOLE &serial_pxa_console
#else
#define PXA_CONSOLE NULL
@@ -714,73 +716,13 @@ struct uart_ops serial_pxa_pops = {
.verify_port = serial_pxa_verify_port,
};
-static struct uart_pxa_port serial_pxa_ports[] = {
- { /* FFUART */
- .name = "FFUART",
- .cken = CKEN_FFUART,
- .port = {
- .type = PORT_PXA,
- .iotype = UPIO_MEM,
- .membase = (void *)&FFUART,
- .mapbase = __PREG(FFUART),
- .irq = IRQ_FFUART,
- .uartclk = 921600 * 16,
- .fifosize = 64,
- .ops = &serial_pxa_pops,
- .line = 0,
- },
- }, { /* BTUART */
- .name = "BTUART",
- .cken = CKEN_BTUART,
- .port = {
- .type = PORT_PXA,
- .iotype = UPIO_MEM,
- .membase = (void *)&BTUART,
- .mapbase = __PREG(BTUART),
- .irq = IRQ_BTUART,
- .uartclk = 921600 * 16,
- .fifosize = 64,
- .ops = &serial_pxa_pops,
- .line = 1,
- },
- }, { /* STUART */
- .name = "STUART",
- .cken = CKEN_STUART,
- .port = {
- .type = PORT_PXA,
- .iotype = UPIO_MEM,
- .membase = (void *)&STUART,
- .mapbase = __PREG(STUART),
- .irq = IRQ_STUART,
- .uartclk = 921600 * 16,
- .fifosize = 64,
- .ops = &serial_pxa_pops,
- .line = 2,
- },
- }, { /* HWUART */
- .name = "HWUART",
- .cken = CKEN_HWUART,
- .port = {
- .type = PORT_PXA,
- .iotype = UPIO_MEM,
- .membase = (void *)&HWUART,
- .mapbase = __PREG(HWUART),
- .irq = IRQ_HWUART,
- .uartclk = 921600 * 16,
- .fifosize = 64,
- .ops = &serial_pxa_pops,
- .line = 3,
- },
- }
-};
-
static struct uart_driver serial_pxa_reg = {
.owner = THIS_MODULE,
.driver_name = "PXA serial",
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
- .nr = ARRAY_SIZE(serial_pxa_ports),
+ .nr = 4,
.cons = PXA_CONSOLE,
};
@@ -806,10 +748,68 @@ static int serial_pxa_resume(struct platform_device *dev)
static int serial_pxa_probe(struct platform_device *dev)
{
- serial_pxa_ports[dev->id].port.dev = &dev->dev;
- uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
- platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
+ struct uart_pxa_port *sport;
+ struct resource *mmres, *irqres;
+ int ret;
+
+ mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+ if (!mmres || !irqres)
+ return -ENODEV;
+
+ sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
+ if (!sport)
+ return -ENOMEM;
+
+ sport->clk = clk_get(&dev->dev, "UARTCLK");
+ if (IS_ERR(sport->clk)) {
+ ret = PTR_ERR(sport->clk);
+ goto err_free;
+ }
+
+ sport->port.type = PORT_PXA;
+ sport->port.iotype = UPIO_MEM;
+ sport->port.mapbase = mmres->start;
+ sport->port.irq = irqres->start;
+ sport->port.fifosize = 64;
+ sport->port.ops = &serial_pxa_pops;
+ sport->port.line = dev->id;
+ sport->port.dev = &dev->dev;
+ sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+ sport->port.uartclk = clk_get_rate(sport->clk);
+
+ /*
+ * Is it worth keeping this?
+ */
+ if (mmres->start == __PREG(FFUART))
+ sport->name = "FFUART";
+ else if (mmres->start == __PREG(BTUART))
+ sport->name = "BTUART";
+ else if (mmres->start == __PREG(STUART))
+ sport->name = "STUART";
+ else if (mmres->start == __PREG(HWUART))
+ sport->name = "HWUART";
+ else
+ sport->name = "???";
+
+ sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
+ if (!sport->port.membase) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+
+ serial_pxa_ports[dev->id] = sport;
+
+ uart_add_one_port(&serial_pxa_reg, &sport->port);
+ platform_set_drvdata(dev, sport);
+
return 0;
+
+ err_clk:
+ clk_put(sport->clk);
+ err_free:
+ kfree(sport);
+ return ret;
}
static int serial_pxa_remove(struct platform_device *dev)
@@ -818,8 +818,9 @@ static int serial_pxa_remove(struct platform_device *dev)
platform_set_drvdata(dev, NULL);
- if (sport)
- uart_remove_one_port(&serial_pxa_reg, &sport->port);
+ uart_remove_one_port(&serial_pxa_reg, &sport->port);
+ clk_put(sport->clk);
+ kfree(sport);
return 0;
}
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index a055f58f342..a3bd3a3f41f 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2127,6 +2127,14 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
spin_unlock_irqrestore(&port->lock, flags);
/*
+ * If this driver supports console, and it hasn't been
+ * successfully registered yet, try to re-register it.
+ * It may be that the port was not available.
+ */
+ if (port->cons && !(port->cons->flags & CON_ENABLED))
+ register_console(port->cons);
+
+ /*
* Power down all ports by default, except the
* console if we have one.
*/
@@ -2286,6 +2294,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
}
state->port = port;
+ state->pm_state = -1;
port->cons = drv->cons;
port->info = state->info;
@@ -2308,15 +2317,6 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
tty_register_device(drv->tty_driver, port->line, port->dev);
/*
- * If this driver supports console, and it hasn't been
- * successfully registered yet, try to re-register it.
- * It may be that the port was not available.
- */
- if (port->type != PORT_UNKNOWN &&
- port->cons && !(port->cons->flags & CON_ENABLED))
- register_console(port->cons);
-
- /*
* Ensure UPF_DEAD is not set.
*/
port->flags &= ~UPF_DEAD;
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 3e715082de3..3173b39f0bf 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -43,6 +43,8 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
@@ -1157,7 +1159,7 @@ static void udc_disable(struct pxa2xx_udc *dev)
#ifdef CONFIG_ARCH_PXA
/* Disable clock for USB device */
- pxa_set_cken(CKEN_USB, 0);
+ clk_disable(dev->clk);
#endif
ep0_idle (dev);
@@ -1202,8 +1204,7 @@ static void udc_enable (struct pxa2xx_udc *dev)
#ifdef CONFIG_ARCH_PXA
/* Enable clock for USB device */
- pxa_set_cken(CKEN_USB, 1);
- udelay(5);
+ clk_enable(dev->clk);
#endif
/* try to clear these bits before we enable the udc */
@@ -2137,6 +2138,14 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
if (irq < 0)
return -ENODEV;
+#ifdef CONFIG_ARCH_PXA
+ dev->clk = clk_get(&pdev->dev, "UDCCLK");
+ if (IS_ERR(dev->clk)) {
+ retval = PTR_ERR(dev->clk);
+ goto err_clk;
+ }
+#endif
+
pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
dev->has_cfr ? "" : " (!cfr)",
SIZE_STR "(pio)"
@@ -2152,11 +2161,10 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev,
"can't get vbus gpio %d, err: %d\n",
dev->mach->gpio_vbus, retval);
- return -EBUSY;
+ goto err_gpio_vbus;
}
gpio_direction_input(dev->mach->gpio_vbus);
vbus_irq = gpio_to_irq(dev->mach->gpio_vbus);
- set_irq_type(vbus_irq, IRQT_BOTHEDGE);
} else
vbus_irq = 0;
@@ -2166,9 +2174,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev,
"can't get pullup gpio %d, err: %d\n",
dev->mach->gpio_pullup, retval);
- if (dev->mach->gpio_vbus)
- gpio_free(dev->mach->gpio_vbus);
- return -EBUSY;
+ goto err_gpio_pullup;
}
gpio_direction_output(dev->mach->gpio_pullup, 0);
}
@@ -2195,11 +2201,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %d, err %d\n",
driver_name, irq, retval);
- if (dev->mach->gpio_pullup)
- gpio_free(dev->mach->gpio_pullup);
- if (dev->mach->gpio_vbus)
- gpio_free(dev->mach->gpio_vbus);
- return -EBUSY;
+ goto err_irq1;
}
dev->got_irq = 1;
@@ -2213,12 +2215,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_DISC_IRQ, retval);
lubbock_fail0:
- free_irq(irq, dev);
- if (dev->mach->gpio_pullup)
- gpio_free(dev->mach->gpio_pullup);
- if (dev->mach->gpio_vbus)
- gpio_free(dev->mach->gpio_vbus);
- return -EBUSY;
+ goto err_irq_lub;
}
retval = request_irq(LUBBOCK_USB_IRQ,
lubbock_vbus_irq,
@@ -2234,22 +2231,37 @@ lubbock_fail0:
#endif
if (vbus_irq) {
retval = request_irq(vbus_irq, udc_vbus_irq,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
driver_name, dev);
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
driver_name, vbus_irq, retval);
- free_irq(irq, dev);
- if (dev->mach->gpio_pullup)
- gpio_free(dev->mach->gpio_pullup);
- if (dev->mach->gpio_vbus)
- gpio_free(dev->mach->gpio_vbus);
- return -EBUSY;
+ goto err_vbus_irq;
}
}
create_proc_files();
return 0;
+
+ err_vbus_irq:
+#ifdef CONFIG_ARCH_LUBBOCK
+ free_irq(LUBBOCK_USB_DISC_IRQ, dev);
+ err_irq_lub:
+#endif
+ free_irq(irq, dev);
+ err_irq1:
+ if (dev->mach->gpio_pullup)
+ gpio_free(dev->mach->gpio_pullup);
+ err_gpio_pullup:
+ if (dev->mach->gpio_vbus)
+ gpio_free(dev->mach->gpio_vbus);
+ err_gpio_vbus:
+#ifdef CONFIG_ARCH_PXA
+ clk_put(dev->clk);
+ err_clk:
+#endif
+ return retval;
}
static void pxa2xx_udc_shutdown(struct platform_device *_dev)
@@ -2284,6 +2296,10 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
if (dev->mach->gpio_pullup)
gpio_free(dev->mach->gpio_pullup);
+#ifdef CONFIG_ARCH_PXA
+ clk_put(dev->clk);
+#endif
+
platform_set_drvdata(pdev, NULL);
the_controller = NULL;
return 0;
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index 0e5d0e6fb0e..1db46d70577 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -125,6 +125,7 @@ struct pxa2xx_udc {
struct timer_list timer;
struct device *dev;
+ struct clk *clk;
struct pxa2xx_udc_mach_info *mach;
u64 dma_mask;
struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS];
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index a280a52f8ef..f9b12ab5964 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -37,6 +37,8 @@
#include <linux/cpufreq.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -506,15 +508,15 @@ static struct fb_ops pxafb_ops = {
*
* Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
*/
-static inline unsigned int get_pcd(unsigned int pixclock)
+static inline unsigned int get_pcd(struct pxafb_info *fbi, unsigned int pixclock)
{
unsigned long long pcd;
/* FIXME: Need to take into account Double Pixel Clock mode
- * (DPC) bit? or perhaps set it based on the various clock
- * speeds */
-
- pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
+ * (DPC) bit? or perhaps set it based on the various clock
+ * speeds */
+ pcd = (unsigned long long)(clk_get_rate(fbi->clk) / 10000);
+ pcd *= pixclock;
do_div(pcd, 100000000 * 2);
/* no need for this, since we should subtract 1 anyway. they cancel */
/* pcd += 1; */ /* make up for integer math truncations */
@@ -523,19 +525,21 @@ static inline unsigned int get_pcd(unsigned int pixclock)
/*
* Some touchscreens need hsync information from the video driver to
- * function correctly. We export it here.
+ * function correctly. We export it here. Note that 'hsync_time' and
+ * the value returned from pxafb_get_hsync_time() is the *reciprocal*
+ * of the hsync period in seconds.
*/
static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd)
{
- unsigned long long htime;
+ unsigned long htime;
if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) {
fbi->hsync_time=0;
return;
}
- htime = (unsigned long long)get_lcdclk_frequency_10khz() * 10000;
- do_div(htime, pcd * fbi->fb.var.hsync_len);
+ htime = clk_get_rate(fbi->clk) / (pcd * fbi->fb.var.hsync_len);
+
fbi->hsync_time = htime;
}
@@ -560,7 +564,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *
{
struct pxafb_lcd_reg new_regs;
u_long flags;
- u_int lines_per_panel, pcd = get_pcd(var->pixclock);
+ u_int lines_per_panel, pcd = get_pcd(fbi, var->pixclock);
pr_debug("pxafb: Configuring PXA LCD\n");
@@ -803,7 +807,7 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
/* enable LCD controller clock */
- pxa_set_cken(CKEN_LCD, 1);
+ clk_enable(fbi->clk);
/* Sequence from 11.7.10 */
LCCR3 = fbi->reg_lccr3;
@@ -840,7 +844,7 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
remove_wait_queue(&fbi->ctrlr_wait, &wait);
/* disable LCD controller clock */
- pxa_set_cken(CKEN_LCD, 0);
+ clk_disable(fbi->clk);
}
/*
@@ -994,7 +998,7 @@ pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
break;
case CPUFREQ_POSTCHANGE:
- pcd = get_pcd(fbi->fb.var.pixclock);
+ pcd = get_pcd(fbi, fbi->fb.var.pixclock);
set_hsync_time(fbi, pcd);
fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
@@ -1119,6 +1123,12 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
memset(fbi, 0, sizeof(struct pxafb_info));
fbi->dev = dev;
+ fbi->clk = clk_get(dev, "LCDCLK");
+ if (IS_ERR(fbi->clk)) {
+ kfree(fbi);
+ return NULL;
+ }
+
strcpy(fbi->fb.fix.id, PXA_NAME);
fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
index 7499a1c4bf7..f8605b807b0 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/pxafb.h
@@ -40,6 +40,7 @@ struct pxafb_dma_descriptor {
struct pxafb_info {
struct fb_info fb;
struct device *dev;
+ struct clk *clk;
/*
* These are the addresses we mapped