diff options
Diffstat (limited to 'drivers')
33 files changed, 963 insertions, 651 deletions
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 4254457d391..b861c08263a 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -158,13 +158,11 @@ static unsigned int cy_isa_addresses[] = { #define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) -#ifdef MODULE static long maddr[NR_CARDS]; static int irq[NR_CARDS]; module_param_array(maddr, long, NULL, 0); module_param_array(irq, int, NULL, 0); -#endif #endif /* CONFIG_ISA */ @@ -598,12 +596,6 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, save_car = readb(base_addr + (CyCAR << index)); cy_writeb(base_addr + (CyCAR << index), save_xir); - /* validate the port# (as configured and open) */ - if (channel + chip * 4 >= cinfo->nports) { - cy_writeb(base_addr + (CySRER << index), - readb(base_addr + (CySRER << index)) & ~CyTxRdy); - goto end; - } info = &cinfo->ports[channel + chip * 4]; tty = tty_port_tty_get(&info->port); if (tty == NULL) { @@ -3316,13 +3308,10 @@ static int __init cy_detect_isa(void) unsigned short cy_isa_irq, nboard; void __iomem *cy_isa_address; unsigned short i, j, cy_isa_nchan; -#ifdef MODULE int isparam = 0; -#endif nboard = 0; -#ifdef MODULE /* Check for module parameters */ for (i = 0; i < NR_CARDS; i++) { if (maddr[i] || i) { @@ -3332,7 +3321,6 @@ static int __init cy_detect_isa(void) if (!maddr[i]) break; } -#endif /* scan the address table probing for Cyclom-Y/ISA boards */ for (i = 0; i < NR_ISA_ADDRS; i++) { @@ -3353,11 +3341,10 @@ static int __init cy_detect_isa(void) iounmap(cy_isa_address); continue; } -#ifdef MODULE + if (isparam && i < NR_CARDS && irq[i]) cy_isa_irq = irq[i]; else -#endif /* find out the board's irq by probing */ cy_isa_irq = detect_isa_irq(cy_isa_address); if (cy_isa_irq == 0) { @@ -4208,3 +4195,4 @@ module_exit(cy_cleanup_module); MODULE_LICENSE("GPL"); MODULE_VERSION(CY_VERSION); MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR); +MODULE_FIRMWARE("cyzfirm.bin"); diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 4c3b59be286..465185fc0f5 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -146,7 +146,7 @@ static void hvc_console_print(struct console *co, const char *b, return; /* This console adapter was removed so it is not usable. */ - if (vtermnos[index] < 0) + if (vtermnos[index] == -1) return; while (count > 0 || i > 0) { diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 517271c762e..911e1da6def 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -208,6 +208,7 @@ static int DumpFifoBuffer( char __user *, int); static void ip2_init_board(int, const struct firmware *); static unsigned short find_eisa_board(int); +static int ip2_setup(char *str); /***************/ /* Static Data */ @@ -263,7 +264,7 @@ static int tracewrap; /* Macros */ /**********/ -#if defined(MODULE) && defined(IP2DEBUG_OPEN) +#ifdef IP2DEBUG_OPEN #define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \ tty->name,(pCh->flags), \ tty->count,/*GET_USE_COUNT(module)*/0,s) @@ -285,7 +286,10 @@ MODULE_AUTHOR("Doug McNash"); MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); MODULE_LICENSE("GPL"); +#define MAX_CMD_STR 50 + static int poll_only; +static char cmd[MAX_CMD_STR]; static int Eisa_irq; static int Eisa_slot; @@ -309,6 +313,8 @@ module_param_array(io, int, NULL, 0); MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards"); module_param(poll_only, bool, 0); MODULE_PARM_DESC(poll_only, "Do not use card interrupts"); +module_param_string(ip2, cmd, MAX_CMD_STR, 0); +MODULE_PARM_DESC(ip2, "Contains module parameter passed with 'ip2='"); /* for sysfs class support */ static struct class *ip2_class; @@ -487,7 +493,6 @@ static const struct firmware *ip2_request_firmware(void) return fw; } -#ifndef MODULE /****************************************************************************** * ip2_setup: * str: kernel command line string @@ -531,7 +536,6 @@ static int __init ip2_setup(char *str) return 1; } __setup("ip2=", ip2_setup); -#endif /* !MODULE */ static int __init ip2_loadmain(void) { @@ -539,14 +543,20 @@ static int __init ip2_loadmain(void) int err = 0; i2eBordStrPtr pB = NULL; int rc = -1; - struct pci_dev *pdev = NULL; const struct firmware *fw = NULL; + char *str; + + str = cmd; if (poll_only) { /* Hard lock the interrupts to zero */ irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0; } + /* Check module parameter with 'ip2=' has been passed or not */ + if (!poll_only && (!strncmp(str, "ip2=", 4))) + ip2_setup(str); + ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0); /* process command line arguments to modprobe or @@ -612,6 +622,7 @@ static int __init ip2_loadmain(void) case PCI: #ifdef CONFIG_PCI { + struct pci_dev *pdev = NULL; u32 addr; int status; @@ -626,7 +637,7 @@ static int __init ip2_loadmain(void) if (pci_enable_device(pdev)) { dev_err(&pdev->dev, "can't enable device\n"); - break; + goto out; } ip2config.type[i] = PCI; ip2config.pci_dev[i] = pci_dev_get(pdev); @@ -638,6 +649,8 @@ static int __init ip2_loadmain(void) dev_err(&pdev->dev, "I/O address error\n"); ip2config.irq[i] = pdev->irq; +out: + pci_dev_put(pdev); } #else printk(KERN_ERR "IP2: PCI card specified but PCI " @@ -656,7 +669,6 @@ static int __init ip2_loadmain(void) break; } /* switch */ } /* for */ - pci_dev_put(pdev); for (i = 0; i < IP2_MAX_BOARDS; ++i) { if (ip2config.addr[i]) { @@ -3197,3 +3209,5 @@ static struct pci_device_id ip2main_pci_tbl[] __devinitdata = { }; MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl); + +MODULE_FIRMWARE("intelliport2.bin"); diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 300d5bd6cd0..be2e8f9a27c 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -113,6 +113,8 @@ * 64-bit verification */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/firmware.h> #include <linux/kernel.h> @@ -140,7 +142,6 @@ #define InterruptTheCard(base) outw(0, (base) + 0xc) #define ClearInterrupt(base) inw((base) + 0x0a) -#define pr_dbg(str...) pr_debug("ISICOM: " str) #ifdef DEBUG #define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c)) #else @@ -249,8 +250,7 @@ static int lock_card(struct isi_board *card) spin_unlock_irqrestore(&card->card_lock, card->flags); msleep(10); } - printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n", - card->base); + pr_warning("Failed to lock Card (0x%lx)\n", card->base); return 0; /* Failed to acquire the card! */ } @@ -379,13 +379,13 @@ static inline int __isicom_paranoia_check(struct isi_port const *port, char *name, const char *routine) { if (!port) { - printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for " - "dev %s in %s.\n", name, routine); + pr_warning("Warning: bad isicom magic for dev %s in %s.\n", + name, routine); return 1; } if (port->magic != ISICOM_MAGIC) { - printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for " - "dev %s in %s.\n", name, routine); + pr_warning("Warning: NULL isicom port for dev %s in %s.\n", + name, routine); return 1; } @@ -450,8 +450,8 @@ static void isicom_tx(unsigned long _data) if (!(inw(base + 0x02) & (1 << port->channel))) continue; - pr_dbg("txing %d bytes, port%d.\n", txcount, - port->channel + 1); + pr_debug("txing %d bytes, port%d.\n", + txcount, port->channel + 1); outw((port->channel << isi_card[card].shift_count) | txcount, base); residue = NO; @@ -547,8 +547,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) byte_count = header & 0xff; if (channel + 1 > card->port_count) { - printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): " - "%d(channel) > port_count.\n", base, channel+1); + pr_warning("%s(0x%lx): %d(channel) > port_count.\n", + __func__, base, channel+1); outw(0x0000, base+0x04); /* enable interrupts */ spin_unlock(&card->card_lock); return IRQ_HANDLED; @@ -582,14 +582,15 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) if (port->status & ISI_DCD) { if (!(header & ISI_DCD)) { /* Carrier has been lost */ - pr_dbg("interrupt: DCD->low.\n" - ); + pr_debug("%s: DCD->low.\n", + __func__); port->status &= ~ISI_DCD; tty_hangup(tty); } } else if (header & ISI_DCD) { /* Carrier has been detected */ - pr_dbg("interrupt: DCD->high.\n"); + pr_debug("%s: DCD->high.\n", + __func__); port->status |= ISI_DCD; wake_up_interruptible(&port->port.open_wait); } @@ -641,17 +642,19 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) break; case 2: /* Statistics */ - pr_dbg("isicom_interrupt: stats!!!.\n"); + pr_debug("%s: stats!!!\n", __func__); break; default: - pr_dbg("Intr: Unknown code in status packet.\n"); + pr_debug("%s: Unknown code in status packet.\n", + __func__); break; } } else { /* Data Packet */ count = tty_prepare_flip_string(tty, &rp, byte_count & ~1); - pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count); + pr_debug("%s: Can rx %d of %d bytes.\n", + __func__, count, byte_count); word_count = count >> 1; insw(base, rp, word_count); byte_count -= (word_count << 1); @@ -661,8 +664,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) byte_count -= 2; } if (byte_count > 0) { - pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping " - "bytes...\n", base, channel + 1); + pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n", + __func__, base, channel + 1); /* drain out unread xtra data */ while (byte_count > 0) { inw(base); @@ -888,8 +891,8 @@ static void isicom_shutdown_port(struct isi_port *port) struct isi_board *card = port->card; if (--card->count < 0) { - pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n", - card->base, card->count); + pr_debug("%s: bad board(0x%lx) count %d.\n", + __func__, card->base, card->count); card->count = 0; } /* last port was closed, shutdown that board too */ @@ -1681,13 +1684,13 @@ static int __init isicom_init(void) retval = tty_register_driver(isicom_normal); if (retval) { - pr_dbg("Couldn't register the dialin driver\n"); + pr_debug("Couldn't register the dialin driver\n"); goto err_puttty; } retval = pci_register_driver(&isicom_driver); if (retval < 0) { - printk(KERN_ERR "ISICOM: Unable to register pci driver.\n"); + pr_err("Unable to register pci driver.\n"); goto err_unrtty; } @@ -1717,3 +1720,8 @@ module_exit(isicom_exit); MODULE_AUTHOR("MultiTech"); MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("isi608.bin"); +MODULE_FIRMWARE("isi608em.bin"); +MODULE_FIRMWARE("isi616em.bin"); +MODULE_FIRMWARE("isi4608.bin"); +MODULE_FIRMWARE("isi4616.bin"); diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 63ee3bbc1ce..166495d6a1d 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -164,24 +164,25 @@ static unsigned int moxaFuncTout = HZ / 2; static unsigned int moxaLowWaterChk; static DEFINE_MUTEX(moxa_openlock); static DEFINE_SPINLOCK(moxa_lock); -/* Variables for insmod */ -#ifdef MODULE + static unsigned long baseaddr[MAX_BOARDS]; static unsigned int type[MAX_BOARDS]; static unsigned int numports[MAX_BOARDS]; -#endif MODULE_AUTHOR("William Chen"); MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver"); MODULE_LICENSE("GPL"); -#ifdef MODULE +MODULE_FIRMWARE("c218tunx.cod"); +MODULE_FIRMWARE("cp204unx.cod"); +MODULE_FIRMWARE("c320tunx.cod"); + module_param_array(type, uint, NULL, 0); MODULE_PARM_DESC(type, "card type: C218=2, C320=4"); module_param_array(baseaddr, ulong, NULL, 0); MODULE_PARM_DESC(baseaddr, "base address"); module_param_array(numports, uint, NULL, 0); MODULE_PARM_DESC(numports, "numports (ignored for C218)"); -#endif + module_param(ttymajor, int, 0); /* @@ -1024,6 +1025,8 @@ static int __init moxa_init(void) { unsigned int isabrds = 0; int retval = 0; + struct moxa_board_conf *brd = moxa_boards; + unsigned int i; printk(KERN_INFO "MOXA Intellio family driver version %s\n", MOXA_VERSION); @@ -1051,10 +1054,7 @@ static int __init moxa_init(void) } /* Find the boards defined from module args. */ -#ifdef MODULE - { - struct moxa_board_conf *brd = moxa_boards; - unsigned int i; + for (i = 0; i < MAX_BOARDS; i++) { if (!baseaddr[i]) break; @@ -1087,8 +1087,6 @@ static int __init moxa_init(void) isabrds++; } } - } -#endif #ifdef CONFIG_PCI retval = pci_register_driver(&moxa_pci_driver); diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 3d923065d9a..e0c5d2a6904 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -895,8 +895,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty) if (inb(info->ioaddr + UART_LSR) == 0xff) { spin_unlock_irqrestore(&info->slock, flags); if (capable(CAP_SYS_ADMIN)) { - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); return 0; } else return -ENODEV; diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 2ad7d37afbd..a3f32a15fde 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -136,10 +136,6 @@ static int debug; #define RECEIVE_BUF_MAX 4 -/* Define all types of vendors and devices to support */ -#define VENDOR1 0x1931 /* Vendor Option */ -#define DEVICE1 0x000c /* HSDPA card */ - #define R_IIR 0x0000 /* Interrupt Identity Register */ #define R_FCR 0x0000 /* Flow Control Register */ #define R_IER 0x0004 /* Interrupt Enable Register */ @@ -371,6 +367,8 @@ struct port { struct mutex tty_sem; wait_queue_head_t tty_wait; struct async_icount tty_icount; + + struct nozomi *dc; }; /* Private data one for each card in the system */ @@ -405,7 +403,7 @@ struct buffer { /* Global variables */ static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = { - {PCI_DEVICE(VENDOR1, DEVICE1)}, + {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */ {}, }; @@ -414,6 +412,8 @@ MODULE_DEVICE_TABLE(pci, nozomi_pci_tbl); static struct nozomi *ndevs[NOZOMI_MAX_CARDS]; static struct tty_driver *ntty_driver; +static const struct tty_port_operations noz_tty_port_ops; + /* * find card by tty_index */ @@ -853,8 +853,6 @@ static int receive_data(enum port_type index, struct nozomi *dc) goto put; } - tty_buffer_request_room(tty, size); - while (size > 0) { read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX); @@ -1473,9 +1471,11 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, for (i = 0; i < MAX_PORT; i++) { struct device *tty_dev; - - mutex_init(&dc->port[i].tty_sem); - tty_port_init(&dc->port[i].port); + struct port *port = &dc->port[i]; + port->dc = dc; + mutex_init(&port->tty_sem); + tty_port_init(&port->port); + port->port.ops = &noz_tty_port_ops; tty_dev = tty_register_device(ntty_driver, dc->index_start + i, &pdev->dev); @@ -1600,67 +1600,74 @@ static void set_dtr(const struct tty_struct *tty, int dtr) * ---------------------------------------------------------------------------- */ -/* Called when the userspace process opens the tty, /dev/noz*. */ -static int ntty_open(struct tty_struct *tty, struct file *file) +static int ntty_install(struct tty_driver *driver, struct tty_struct *tty) { struct port *port = get_port_by_tty(tty); struct nozomi *dc = get_dc_by_tty(tty); - unsigned long flags; - + int ret; if (!port || !dc || dc->state != NOZOMI_STATE_READY) return -ENODEV; - - if (mutex_lock_interruptible(&port->tty_sem)) - return -ERESTARTSYS; - - port->port.count++; - dc->open_ttys++; - - /* Enable interrupt downlink for channel */ - if (port->port.count == 1) { - tty->driver_data = port; - tty_port_tty_set(&port->port, tty); - DBG1("open: %d", port->token_dl); - spin_lock_irqsave(&dc->spin_mutex, flags); - dc->last_ier = dc->last_ier | port->token_dl; - writew(dc->last_ier, dc->reg_ier); - spin_unlock_irqrestore(&dc->spin_mutex, flags); + ret = tty_init_termios(tty); + if (ret == 0) { + tty_driver_kref_get(driver); + driver->ttys[tty->index] = tty; } - mutex_unlock(&port->tty_sem); - return 0; + return ret; } -/* Called when the userspace process close the tty, /dev/noz*. Also - called immediately if ntty_open fails in which case tty->driver_data - will be NULL an we exit by the first return */ +static void ntty_cleanup(struct tty_struct *tty) +{ + tty->driver_data = NULL; +} -static void ntty_close(struct tty_struct *tty, struct file *file) +static int ntty_activate(struct tty_port *tport, struct tty_struct *tty) { - struct nozomi *dc = get_dc_by_tty(tty); - struct port *nport = tty->driver_data; - struct tty_port *port = &nport->port; + struct port *port = container_of(tport, struct port, port); + struct nozomi *dc = port->dc; unsigned long flags; - if (!dc || !nport) - return; + DBG1("open: %d", port->token_dl); + spin_lock_irqsave(&dc->spin_mutex, flags); + dc->last_ier = dc->last_ier | port->token_dl; + writew(dc->last_ier, dc->reg_ier); + dc->open_ttys++; + spin_unlock_irqrestore(&dc->spin_mutex, flags); + printk("noz: activated %d: %p\n", tty->index, tport); + return 0; +} - /* Users cannot interrupt a close */ - mutex_lock(&nport->tty_sem); +static int ntty_open(struct tty_struct *tty, struct file *filp) +{ + struct port *port = get_port_by_tty(tty); + return tty_port_open(&port->port, tty, filp); +} - WARN_ON(!port->count); +static void ntty_shutdown(struct tty_port *tport) +{ + struct port *port = container_of(tport, struct port, port); + struct nozomi *dc = port->dc; + unsigned long flags; + DBG1("close: %d", port->token_dl); + spin_lock_irqsave(&dc->spin_mutex, flags); + dc->last_ier &= ~(port->token_dl); + writew(dc->last_ier, dc->reg_ier); dc->open_ttys--; - port->count--; + spin_unlock_irqrestore(&dc->spin_mutex, flags); + printk("noz: shutdown %p\n", tport); +} - if (port->count == 0) { - DBG1("close: %d", nport->token_dl); - tty_port_tty_set(port, NULL); - spin_lock_irqsave(&dc->spin_mutex, flags); - dc->last_ier &= ~(nport->token_dl); - writew(dc->last_ier, dc->reg_ier); - spin_unlock_irqrestore(&dc->spin_mutex, flags); - } - mutex_unlock(&nport->tty_sem); +static void ntty_close(struct tty_struct *tty, struct file *filp) +{ + struct port *port = tty->driver_data; + if (port) + tty_port_close(&port->port, tty, filp); +} + +static void ntty_hangup(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + tty_port_hangup(&port->port); } /* @@ -1680,15 +1687,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, if (!dc || !port) return -ENODEV; - if (unlikely(!mutex_trylock(&port->tty_sem))) { - /* - * must test lock as tty layer wraps calls - * to this function with BKL - */ - dev_err(&dc->pdev->dev, "Would have deadlocked - " - "return EAGAIN\n"); - return -EAGAIN; - } + mutex_lock(&port->tty_sem); if (unlikely(!port->port.count)) { DBG1(" "); @@ -1728,25 +1727,23 @@ exit: * This method is called by the upper tty layer. * #according to sources N_TTY.c it expects a value >= 0 and * does not check for negative values. + * + * If the port is unplugged report lots of room and let the bits + * dribble away so we don't block anything. */ static int ntty_write_room(struct tty_struct *tty) { struct port *port = tty->driver_data; - int room = 0; + int room = 4096; const struct nozomi *dc = get_dc_by_tty(tty); - if (!dc || !port) - return 0; - if (!mutex_trylock(&port->tty_sem)) - return 0; - - if (!port->port.count) - goto exit; - - room = port->fifo_ul.size - kfifo_len(&port->fifo_ul); - -exit: - mutex_unlock(&port->tty_sem); + if (dc) { + mutex_lock(&port->tty_sem); + if (port->port.count) + room = port->fifo_ul.size - + kfifo_len(&port->fifo_ul); + mutex_unlock(&port->tty_sem); + } return room; } @@ -1906,10 +1903,16 @@ exit_in_buffer: return rval; } +static const struct tty_port_operations noz_tty_port_ops = { + .activate = ntty_activate, + .shutdown = ntty_shutdown, +}; + static const struct tty_operations tty_ops = { .ioctl = ntty_ioctl, .open = ntty_open, .close = ntty_close, + .hangup = ntty_hangup, .write = ntty_write, .write_room = ntty_write_room, .unthrottle = ntty_unthrottle, @@ -1917,6 +1920,8 @@ static const struct tty_operations tty_ops = { .chars_in_buffer = ntty_chars_in_buffer, .tiocmget = ntty_tiocmget, .tiocmset = ntty_tiocmset, + .install = ntty_install, + .cleanup = ntty_cleanup, }; /* Module initialization */ diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 452370af95d..986aa606a6b 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -658,8 +658,7 @@ static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id) info->mon.char_max = char_count; info->mon.char_last = char_count; #endif - len = tty_buffer_request_room(tty, char_count); - while (len--) { + while (char_count--) { data = base_addr[CyRDR]; tty_insert_flip_char(tty, data, TTY_NORMAL); #ifdef CYCLOM_16Y_HACK diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 268e17f9ec3..07ac14d949c 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -646,8 +646,6 @@ static void sx_receive(struct specialix_board *bp) dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count); port->hits[count > 8 ? 9 : count]++; - tty_buffer_request_room(tty, count); - while (count--) tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL); tty_flip_buffer_push(tty); diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 4846b73ef28..0658fc54822 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -2031,7 +2031,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch) if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char")) return 0; - if (!tty || !info->xmit_buf) + if (!info->xmit_buf) return 0; spin_lock_irqsave(&info->irq_spinlock, flags); @@ -2121,7 +2121,7 @@ static int mgsl_write(struct tty_struct * tty, if (mgsl_paranoia_check(info, tty->name, "mgsl_write")) goto cleanup; - if (!tty || !info->xmit_buf) + if (!info->xmit_buf) goto cleanup; if ( info->params.mode == MGSL_MODE_HDLC || diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 8678f0c8699..4561ce2fba6 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -468,7 +468,7 @@ static unsigned int free_tbuf_count(struct slgt_info *info); static unsigned int tbuf_bytes(struct slgt_info *info); static void reset_tbufs(struct slgt_info *info); static void tdma_reset(struct slgt_info *info); -static void tx_load(struct slgt_info *info, const char *buf, unsigned int count); +static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); static void get_signals(struct slgt_info *info); static void set_signals(struct slgt_info *info); @@ -813,59 +813,32 @@ static int write(struct tty_struct *tty, int ret = 0; struct slgt_info *info = tty->driver_data; unsigned long flags; - unsigned int bufs_needed; if (sanity_check(info, tty->name, "write")) - goto cleanup; + return -EIO; + DBGINFO(("%s write count=%d\n", info->device_name, count)); - if (!info->tx_buf) - goto cleanup; + if (!info->tx_buf || (count > info->max_frame_size)) + return -EIO; - if (count > info->max_frame_size) { - ret = -EIO; - goto cleanup; - } + if (!count || tty->stopped || tty->hw_stopped) + return 0; - if (!count) - goto cleanup; + spin_lock_irqsave(&info->lock, flags); - if (!info->tx_active && info->tx_count) { + if (info->tx_count) { /* send accumulated data from send_char() */ - tx_load(info, info->tx_buf, info->tx_count); - goto start; + if (!tx_load(info, info->tx_buf, info->tx_count)) + goto cleanup; + info->tx_count = 0; } - bufs_needed = (count/DMABUFSIZE); - if (count % DMABUFSIZE) - ++bufs_needed; - if (bufs_needed > free_tbuf_count(info)) - goto cleanup; - ret = info->tx_count = count; - tx_load(info, buf, count); - goto start; - -start: - if (info->tx_count && !tty->stopped && !tty->hw_stopped) { - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); - else if (!(rd_reg32(info, TDCSR) & BIT0)) { - /* transmit still active but transmit DMA stopped */ - unsigned int i = info->tbuf_current; - if (!i) - i = info->tbuf_count; - i--; - /* if DMA buf unsent must try later after tx idle */ - if (desc_count(info->tbufs[i])) - ret = 0; - } - if (ret > 0) - update_tx_timer(info); - spin_unlock_irqrestore(&info->lock,flags); - } + if (tx_load(info, buf, count)) + ret = count; cleanup: + spin_unlock_irqrestore(&info->lock, flags); DBGINFO(("%s write rc=%d\n", info->device_name, ret)); return ret; } @@ -882,7 +855,7 @@ static int put_char(struct tty_struct *tty, unsigned char ch) if (!info->tx_buf) return 0; spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active && (info->tx_count < info->max_frame_size)) { + if (info->tx_count < info->max_frame_size) { info->tx_buf[info->tx_count++] = ch; ret = 1; } @@ -981,10 +954,8 @@ static void flush_chars(struct tty_struct *tty) DBGINFO(("%s flush_chars start transmit\n", info->device_name)); spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active && info->tx_count) { - tx_load(info, info->tx_buf,info->tx_count); - tx_start(info); - } + if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) + info->tx_count = 0; spin_unlock_irqrestore(&info->lock,flags); } @@ -997,10 +968,9 @@ static void flush_buffer(struct tty_struct *tty) return; DBGINFO(("%s flush_buffer\n", info->device_name)); - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - info->tx_count = 0; - spin_unlock_irqrestore(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock, flags); tty_wakeup(tty); } @@ -1033,12 +1003,10 @@ static void tx_release(struct tty_struct *tty) if (sanity_check(info, tty->name, "tx_release")) return; DBGINFO(("%s tx_release\n", info->device_name)); - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active && info->tx_count) { - tx_load(info, info->tx_buf, info->tx_count); - tx_start(info); - } - spin_unlock_irqrestore(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); + if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock, flags); } /* @@ -1506,27 +1474,25 @@ static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, DBGINFO(("%s hdlc_xmit\n", dev->name)); + if (!skb->len) + return NETDEV_TX_OK; + /* stop sending until this frame completes */ netif_stop_queue(dev); - /* copy data to device buffers */ - info->tx_count = skb->len; - tx_load(info, skb->data, skb->len); - /* update network statistics */ dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - /* save start time for transmit timeout detection */ dev->trans_start = jiffies; - spin_lock_irqsave(&info->lock,flags); - tx_start(info); - update_tx_timer(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); + tx_load(info, skb->data, skb->len); + spin_unlock_irqrestore(&info->lock, flags); + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); return NETDEV_TX_OK; } @@ -2180,7 +2146,7 @@ static void isr_serial(struct slgt_info *info) if (info->params.mode == MGSL_MODE_ASYNC) { if (status & IRQ_TXIDLE) { - if (info->tx_count) + if (info->tx_active) isr_txeom(info, status); } if (info->rx_pio && (status & IRQ_RXDATA)) @@ -2276,13 +2242,42 @@ static void isr_tdma(struct slgt_info *info) } } +/* + * return true if there are unsent tx DMA buffers, otherwise false + * + * if there are unsent buffers then info->tbuf_start + * is set to index of first unsent buffer + */ +static bool unsent_tbufs(struct slgt_info *info) +{ + unsigned int i = info->tbuf_current; + bool rc = false; + + /* + * search backwards from last loaded buffer (precedes tbuf_current) + * for first unsent buffer (desc_count > 0) + */ + + do { + if (i) + i--; + else + i = info->tbuf_count - 1; + if (!desc_count(info->tbufs[i])) + break; + info->tbuf_start = i; + rc = true; + } while (i != info->tbuf_current); + + return rc; +} + static void isr_txeom(struct slgt_info *info, unsigned short status) { DBGISR(("%s txeom status=%04x\n", info->device_name, status)); slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); tdma_reset(info); - reset_tbufs(info); if (status & IRQ_TXUNDER) { unsigned short val = rd_reg16(info, TCR); wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ @@ -2297,8 +2292,12 @@ static void isr_txeom(struct slgt_info *info, unsigned short status) info->icount.txok++; } + if (unsent_tbufs(info)) { + tx_start(info); + update_tx_timer(info); + return; + } info->tx_active = false; - info->tx_count = 0; del_timer(&info->tx_timer); @@ -3949,7 +3948,7 @@ static void tx_start(struct slgt_info *info) info->tx_enabled = true; } - if (info->tx_count) { + if (desc_count(info->tbufs[info->tbuf_start])) { info->drop_rts_on_tx_done = false; if (info->params.mode != MGSL_MODE_ASYNC) { @@ -4772,25 +4771,36 @@ static unsigned int tbuf_bytes(struct slgt_info *info) } /* - * load transmit DMA buffer(s) with data + * load data into transmit DMA buffer ring and start transmitter if needed + * return true if data accepted, otherwise false (buffers full) */ -static void tx_load(struct slgt_info *info, const char *buf, unsigned int size) +static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size) { unsigned short count; unsigned int i; struct slgt_desc *d; - if (size == 0) - return; + /* check required buffer space */ + if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info)) + return false; DBGDATA(info, buf, size, "tx"); + /* + * copy data to one or more DMA buffers in circular ring + * tbuf_start = first buffer for this data + * tbuf_current = next free buffer + * + * Copy all data before making data visible to DMA controller by + * setting descriptor count of the first buffer. + * This prevents an active DMA controller from reading the first DMA + * buffers of a frame and stopping before the final buffers are filled. + */ + info->tbuf_start = i = info->tbuf_current; while (size) { d = &info->tbufs[i]; - if (++i == info->tbuf_count) - i = 0; count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size); memcpy(d->buf, buf, count); @@ -4808,11 +4818,27 @@ static void tx_load(struct slgt_info *info, const char *buf, unsigned int size) else set_desc_eof(*d, 0); - set_desc_count(*d, count); + /* set descriptor count for all but first buffer */ + if (i != info->tbuf_start) + set_desc_count(*d, count); d->buf_count = count; + + if (++i == info->tbuf_count) + i = 0; } info->tbuf_current = i; + + /* set first buffer count to make new data visible to DMA controller */ + d = &info->tbufs[info->tbuf_start]; + set_desc_count(*d, d->buf_count); + + /* start transmitter if needed and update transmit timeout */ + if (!info->tx_active) + tx_start(info); + update_tx_timer(info); + + return true; } static int register_test(struct slgt_info *info) @@ -4934,9 +4960,7 @@ static int loopback_test(struct slgt_info *info) spin_lock_irqsave(&info->lock,flags); async_mode(info); rx_start(info); - info->tx_count = count; tx_load(info, buf, count); - tx_start(info); spin_unlock_irqrestore(&info->lock, flags); /* wait for receive complete */ diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c index 66fa4e10d76..f27c4d6d956 100644 --- a/drivers/char/tty_buffer.c +++ b/drivers/char/tty_buffer.c @@ -247,7 +247,8 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, { int copied = 0; do { - int space = tty_buffer_request_room(tty, size - copied); + int goal = min(size - copied, TTY_BUFFER_PAGE); + int space = tty_buffer_request_room(tty, goal); struct tty_buffer *tb = tty->buf.tail; /* If there is no space then tb may be NULL */ if (unlikely(space == 0)) @@ -283,7 +284,8 @@ int tty_insert_flip_string_flags(struct tty_struct *tty, { int copied = 0; do { - int space = tty_buffer_request_room(tty, size - copied); + int goal = min(size - copied, TTY_BUFFER_PAGE); + int space = tty_buffer_request_room(tty, goal); struct tty_buffer *tb = tty->buf.tail; /* If there is no space then tb may be NULL */ if (unlikely(space == 0)) diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 3f653f7d849..500e740ec5e 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -706,12 +706,13 @@ static void tty_reset_termios(struct tty_struct *tty) /** * tty_ldisc_reinit - reinitialise the tty ldisc * @tty: tty to reinit + * @ldisc: line discipline to reinitialize * - * Switch the tty back to N_TTY line discipline and leave the - * ldisc state closed + * Switch the tty to a line discipline and leave the ldisc + * state closed */ -static void tty_ldisc_reinit(struct tty_struct *tty) +static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc) { struct tty_ldisc *ld; @@ -721,10 +722,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty) /* * Switch the line discipline back */ - ld = tty_ldisc_get(N_TTY); + ld = tty_ldisc_get(ldisc); BUG_ON(IS_ERR(ld)); tty_ldisc_assign(tty, ld); - tty_set_termios_ldisc(tty, N_TTY); + tty_set_termios_ldisc(tty, ldisc); } /** @@ -745,6 +746,8 @@ static void tty_ldisc_reinit(struct tty_struct *tty) void tty_ldisc_hangup(struct tty_struct *tty) { struct tty_ldisc *ld; + int reset = tty->driver->flags & TTY_DRIVER_RESET_TERMIOS; + int err = 0; /* * FIXME! What are the locking issues here? This may me overdoing @@ -772,25 +775,32 @@ void tty_ldisc_hangup(struct tty_struct *tty) wake_up_interruptible_poll(&tty->read_wait, POLLIN); /* * Shutdown the current line discipline, and reset it to - * N_TTY. + * N_TTY if need be. + * + * Avoid racing set_ldisc or tty_ldisc_release */ - if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) { - /* Avoid racing set_ldisc or tty_ldisc_release */ - mutex_lock(&tty->ldisc_mutex); - tty_ldisc_halt(tty); - if (tty->ldisc) { /* Not yet closed */ - /* Switch back to N_TTY */ - tty_ldisc_reinit(tty); - /* At this point we have a closed ldisc and we want to - reopen it. We could defer this to the next open but - it means auditing a lot of other paths so this is - a FIXME */ + mutex_lock(&tty->ldisc_mutex); + tty_ldisc_halt(tty); + /* At this point we have a closed ldisc and we want to + reopen it. We could defer this to the next open but + it means auditing a lot of other paths so this is + a FIXME */ + if (tty->ldisc) { /* Not yet closed */ + if (reset == 0) { + tty_ldisc_reinit(tty, tty->termios->c_line); + err = tty_ldisc_open(tty, tty->ldisc); + } + /* If the re-open fails or we reset then go to N_TTY. The + N_TTY open cannot fail */ + if (reset || err) { + tty_ldisc_reinit(tty, N_TTY); WARN_ON(tty_ldisc_open(tty, tty->ldisc)); - tty_ldisc_enable(tty); } - mutex_unlock(&tty->ldisc_mutex); - tty_reset_termios(tty); + tty_ldisc_enable(tty); } + mutex_unlock(&tty->ldisc_mutex); + if (reset) + tty_reset_termios(tty); } /** diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 6aa10284104..87778dcf872 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -888,7 +888,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -EFAULT; goto out; } - if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS) { + if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS && tmp.mode != VT_PROCESS_AUTO) { ret = -EINVAL; goto out; } @@ -1622,7 +1622,7 @@ static void complete_change_console(struct vc_data *vc) * telling it that it has acquired. Also check if it has died and * clean up (similar to logic employed in change_console()) */ - if (vc->vt_mode.mode == VT_PROCESS) { + if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) { /* * Send the signal as privileged - kill_pid() will * tell us if the process has gone or something else @@ -1682,7 +1682,7 @@ void change_console(struct vc_data *new_vc) * vt to auto control. */ vc = vc_cons[fg_console].d; - if (vc->vt_mode.mode == VT_PROCESS) { + if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) { /* * Send the signal as privileged - kill_pid() will * tell us if the process has gone or something else @@ -1693,27 +1693,28 @@ void change_console(struct vc_data *new_vc) */ vc->vt_newvt = new_vc->vc_num; if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) { + if(vc->vt_mode.mode == VT_PROCESS) + /* + * It worked. Mark the vt to switch to and + * return. The process needs to send us a + * VT_RELDISP ioctl to complete the switch. + */ + return; + } else { /* - * It worked. Mark the vt to switch to and - * return. The process needs to send us a - * VT_RELDISP ioctl to complete the switch. + * The controlling process has died, so we revert back to + * normal operation. In this case, we'll also change back + * to KD_TEXT mode. I'm not sure if this is strictly correct + * but it saves the agony when the X server dies and the screen + * remains blanked due to KD_GRAPHICS! It would be nice to do + * this outside of VT_PROCESS but there is no single process + * to account for and tracking tty count may be undesirable. */ - return; + reset_vc(vc); } /* - * The controlling process has died, so we revert back to - * normal operation. In this case, we'll also change back - * to KD_TEXT mode. I'm not sure if this is strictly correct - * but it saves the agony when the X server dies and the screen - * remains blanked due to KD_GRAPHICS! It would be nice to do - * this outside of VT_PROCESS but there is no single process - * to account for and tracking tty count may be undesirable. - */ - reset_vc(vc); - - /* - * Fall through to normal (VT_AUTO) handling of the switch... + * Fall through to normal (VT_AUTO and VT_PROCESS_AUTO) handling of the switch... */ } diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index f53755533e7..3fab78ba895 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -37,6 +37,7 @@ #include <linux/gfp.h> #include <linux/tty.h> #include <linux/tty_flip.h> +#include <linux/kfifo.h> #include <linux/mmc/core.h> #include <linux/mmc/card.h> @@ -47,19 +48,9 @@ #define UART_NR 8 /* Number of UARTs this driver can handle */ -#define UART_XMIT_SIZE PAGE_SIZE +#define FIFO_SIZE PAGE_SIZE #define WAKEUP_CHARS 256 -#define circ_empty(circ) ((circ)->head == (circ)->tail) -#define circ_clear(circ) ((circ)->head = (circ)->tail = 0) - -#define circ_chars_pending(circ) \ - (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE)) - -#define circ_chars_free(circ) \ - (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE)) - - struct uart_icount { __u32 cts; __u32 dsr; @@ -82,7 +73,7 @@ struct sdio_uart_port { struct mutex func_lock; struct task_struct *in_sdio_uart_irq; unsigned int regs_offset; - struct circ_buf xmit; + struct kfifo xmit_fifo; spinlock_t write_lock; struct uart_icount icount; unsigned int uartclk; @@ -105,6 +96,8 @@ static int sdio_uart_add_port(struct sdio_uart_port *port) kref_init(&port->kref); mutex_init(&port->func_lock); spin_lock_init(&port->write_lock); + if (kfifo_alloc(&port->xmit_fifo, FIFO_SIZE, GFP_KERNEL)) + return -ENOMEM; spin_lock(&sdio_uart_table_lock); for (index = 0; index < UART_NR; index++) { @@ -140,6 +133,7 @@ static void sdio_uart_port_destroy(struct kref *kref) { struct sdio_uart_port *port = container_of(kref, struct sdio_uart_port, kref); + kfifo_free(&port->xmit_fifo); kfree(port); } @@ -456,9 +450,11 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, static void sdio_uart_transmit_chars(struct sdio_uart_port *port) { - struct circ_buf *xmit = &port->xmit; + struct kfifo *xmit = &port->xmit_fifo; int count; struct tty_struct *tty; + u8 iobuf[16]; + int len; if (port->x_char) { sdio_out(port, UART_TX, port->x_char); @@ -469,27 +465,25 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) tty = tty_port_tty_get(&port->port); - if (tty == NULL || circ_empty(xmit) || + if (tty == NULL || !kfifo_len(xmit) || tty->stopped || tty->hw_stopped) { sdio_uart_stop_tx(port); tty_kref_put(tty); return; } - count = 16; - do { - sdio_out(port, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + len = kfifo_out_locked(xmit, iobuf, 16, &port->write_lock); + for (count = 0; count < len; count++) { + sdio_out(port, UART_TX, iobuf[count]); port->icount.tx++; - if (circ_empty(xmit)) - break; - } while (--count > 0); + } - if (circ_chars_pending(xmit) < WAKEUP_CHARS) + len = kfifo_len(xmit); + if (len < WAKEUP_CHARS) { tty_wakeup(tty); - - if (circ_empty(xmit)) - sdio_uart_stop_tx(port); + if (len == 0) + sdio_uart_stop_tx(port); + } tty_kref_put(tty); } @@ -632,7 +626,6 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) { struct sdio_uart_port *port = container_of(tport, struct sdio_uart_port, port); - unsigned long page; int ret; /* @@ -641,22 +634,17 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) */ set_bit(TTY_IO_ERROR, &tty->flags); - /* Initialise and allocate the transmit buffer. */ - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - port->xmit.buf = (unsigned char *)page; - circ_clear(&port->xmit); + kfifo_reset(&port->xmit_fifo); ret = sdio_uart_claim_func(port); if (ret) - goto err1; + return ret; ret = sdio_enable_func(port->func); if (ret) - goto err2; + goto err1; ret = sdio_claim_irq(port->func, sdio_uart_irq); if (ret) - goto err3; + goto err2; /* * Clear the FIFO buffers and disable them. @@ -700,12 +688,10 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) sdio_uart_release_func(port); return 0; -err3: - sdio_disable_func(port->func); err2: - sdio_uart_release_func(port); + sdio_disable_func(port->func); err1: - free_page((unsigned long)port->xmit.buf); + sdio_uart_release_func(port); return ret; } @@ -727,7 +713,7 @@ static void sdio_uart_shutdown(struct tty_port *tport) ret = sdio_uart_claim_func(port); if (ret) - goto skip; + return; sdio_uart_stop_rx(port); @@ -749,10 +735,6 @@ static void sdio_uart_shutdown(struct tty_port *tport) sdio_disable_func(port->func); sdio_uart_release_func(port); - -skip: - /* Free the transmit buffer page. */ - free_page((unsigned long)port->xmit.buf); } /** @@ -822,27 +804,12 @@ static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct sdio_uart_port *port = tty->driver_data; - struct circ_buf *circ = &port->xmit; - int c, ret = 0; + int ret; if (!port->func) return -ENODEV; - spin_lock(&port->write_lock); - while (1) { - c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); - if (count < c) - c = count; - if (c <= 0) - break; - memcpy(circ->buf + circ->head, buf, c); - circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1); - buf += c; - count -= c; - ret += c; - } - spin_unlock(&port->write_lock); - + ret = kfifo_in_locked(&port->xmit_fifo, buf, count, &port->write_lock); if (!(port->ier & UART_IER_THRI)) { int err = sdio_uart_claim_func(port); if (!err) { @@ -859,13 +826,13 @@ static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf, static int sdio_uart_write_room(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; - return port ? circ_chars_free(&port->xmit) : 0; + return FIFO_SIZE - kfifo_len(&port->xmit_fifo); } static int sdio_uart_chars_in_buffer(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; - return port ? circ_chars_pending(&port->xmit) : 0; + return kfifo_len(&port->xmit_fifo); } static void sdio_uart_send_xchar(struct tty_struct *tty, char ch) diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index ad113b0f62d..0950fa40684 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2908,6 +2908,7 @@ enum parport_pc_pci_cards { netmos_9805, netmos_9815, netmos_9901, + netmos_9865, quatech_sppxp100, }; @@ -2989,6 +2990,7 @@ static struct parport_pc_pci { /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* netmos_9901 */ { 1, { { 0, -1 }, } }, + /* netmos_9865 */ { 1, { { 0, -1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, }; @@ -3092,6 +3094,10 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 0xA000, 0x2000, 0, 0, netmos_9901 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, 0, 0, netmos_9865 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x2000, 0, 0, netmos_9865 }, /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index d935b2d04f9..ae0251ef6f4 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -153,8 +153,6 @@ static int baud_table[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 0 }; -#define BAUD_TABLE_SIZE (sizeof(baud_table)/sizeof(baud_table[0])) - /* Sets or clears DTR/RTS on the requested line */ static inline void m68k_rtsdtr(struct m68k_serial *ss, int set) { @@ -1406,10 +1404,10 @@ static void m68328_set_baud(void) USTCNT = ustcnt & ~USTCNT_TXEN; again: - for (i = 0; i < sizeof(baud_table) / sizeof(baud_table[0]); i++) + for (i = 0; i < ARRAY_SIZE(baud_table); i++) if (baud_table[i] == m68328_console_baud) break; - if (i >= sizeof(baud_table) / sizeof(baud_table[0])) { + if (i >= ARRAY_SIZE(baud_table)) { m68328_console_baud = 9600; goto again; } @@ -1435,7 +1433,7 @@ int m68328_console_setup(struct console *cp, char *arg) if (arg) n = simple_strtoul(arg,NULL,0); - for (i = 0; i < BAUD_TABLE_SIZE; i++) + for (i = 0; i < ARRAY_SIZE(baud_table); i++) if (baud_table[i] == n) break; if (i < BAUD_TABLE_SIZE) { diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index a81ff7bc5fa..7c4ebe6ee18 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2690,6 +2690,15 @@ static void __init serial8250_isa_init_ports(void) } } +static void +serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) +{ + up->port.type = type; + up->port.fifosize = uart_config[type].fifo_size; + up->capabilities = uart_config[type].flags; + up->tx_loadsz = uart_config[type].tx_loadsz; +} + static void __init serial8250_register_ports(struct uart_driver *drv, struct device *dev) { @@ -2706,6 +2715,10 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) struct uart_8250_port *up = &serial8250_ports[i]; up->port.dev = dev; + + if (up->port.flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(up, up->port.type); + uart_add_one_port(drv, &up->port); } } @@ -3118,12 +3131,8 @@ int serial8250_register_port(struct uart_port *port) if (port->dev) uart->port.dev = port->dev; - if (port->flags & UPF_FIXED_TYPE) { - uart->port.type = port->type; - uart->port.fifosize = uart_config[port->type].fifo_size; - uart->capabilities = uart_config[port->type].flags; - uart->tx_loadsz = uart_config[port->type].tx_loadsz; - } + if (port->flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(uart, port->type); set_io_from_upio(&uart->port); /* Possibly override default I/O functions. */ diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index b28af13c45a..01c012da4e2 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -760,7 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev) /* subdevice 0x00PS means <P> parallel, <S> serial */ unsigned int num_serial = dev->subsystem_device & 0xf; - if (dev->device == PCI_DEVICE_ID_NETMOS_9901) + if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || + (dev->device == PCI_DEVICE_ID_NETMOS_9865)) return 0; if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && dev->subsystem_device == 0x0299) @@ -1479,6 +1480,7 @@ enum pci_board_num_t { pbn_b0_bt_1_115200, pbn_b0_bt_2_115200, + pbn_b0_bt_4_115200, pbn_b0_bt_8_115200, pbn_b0_bt_1_460800, @@ -1703,6 +1705,12 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 115200, .uart_offset = 8, }, + [pbn_b0_bt_4_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, [pbn_b0_bt_8_115200] = { .flags = FL_BASE0|FL_BASE_BARS, .num_ports = 8, @@ -3191,6 +3199,15 @@ static struct pci_device_id serial_pci_tbl[] = { 0x1208, 0x0004, 0, 0, pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, /* * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com */ @@ -3649,6 +3666,18 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_b0_1_115200 }, /* + * Best Connectivity PCI Multi I/O cards + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3004, + 0, 0, pbn_b0_bt_4_115200 }, + + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 888a0ce91c4..746e07033dc 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1418,42 +1418,37 @@ config SERIAL_BFIN_SPORT To compile this driver as a module, choose M here: the module will be called bfin_sport_uart. -choice - prompt "Baud rate for Blackfin SPORT UART" - depends on SERIAL_BFIN_SPORT - default SERIAL_SPORT_BAUD_RATE_57600 - help - Choose a baud rate for the SPORT UART, other uart settings are - 8 bit, 1 stop bit, no parity, no flow control. - -config SERIAL_SPORT_BAUD_RATE_115200 - bool "115200" - -config SERIAL_SPORT_BAUD_RATE_57600 - bool "57600" +config SERIAL_BFIN_SPORT_CONSOLE + bool "Console on Blackfin sport emulated uart" + depends on SERIAL_BFIN_SPORT=y + select SERIAL_CORE_CONSOLE -config SERIAL_SPORT_BAUD_RATE_38400 - bool "38400" +config SERIAL_BFIN_SPORT0_UART + bool "Enable UART over SPORT0" + depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M) + help + Enable UART over SPORT0 -config SERIAL_SPORT_BAUD_RATE_19200 - bool "19200" +config SERIAL_BFIN_SPORT1_UART + bool "Enable UART over SPORT1" + depends on SERIAL_BFIN_SPORT + help + Enable UART over SPORT1 -config SERIAL_SPORT_BAUD_RATE_9600 - bool "9600" -endchoice +config SERIAL_BFIN_SPORT2_UART + bool "Enable UART over SPORT2" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT2 -config SPORT_BAUD_RATE - int - depends on SERIAL_BFIN_SPORT - default 115200 if (SERIAL_SPORT_BAUD_RATE_115200) - default 57600 if (SERIAL_SPORT_BAUD_RATE_57600) - default 38400 if (SERIAL_SPORT_BAUD_RATE_38400) - default 19200 if (SERIAL_SPORT_BAUD_RATE_19200) - default 9600 if (SERIAL_SPORT_BAUD_RATE_9600) +config SERIAL_BFIN_SPORT3_UART + bool "Enable UART over SPORT3" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT3 config SERIAL_TIMBERDALE tristate "Support for timberdale UART" - depends on MFD_TIMBERDALE select SERIAL_CORE ---help--- Add support for UART controller on timberdale. diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 9d948bccafa..2c9bf9b6832 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1213,6 +1213,24 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) return ret; } +#ifdef CONFIG_CONSOLE_POLL +static int atmel_poll_get_char(struct uart_port *port) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY)) + cpu_relax(); + + return UART_GET_CHAR(port); +} + +static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) + cpu_relax(); + + UART_PUT_CHAR(port, ch); +} +#endif + static struct uart_ops atmel_pops = { .tx_empty = atmel_tx_empty, .set_mctrl = atmel_set_mctrl, @@ -1232,6 +1250,10 @@ static struct uart_ops atmel_pops = { .config_port = atmel_config_port, .verify_port = atmel_verify_port, .pm = atmel_serial_pm, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = atmel_poll_get_char, + .poll_put_char = atmel_poll_put_char, +#endif }; /* diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c index 37ad0c44993..a1a0e55d080 100644 --- a/drivers/serial/bcm63xx_uart.c +++ b/drivers/serial/bcm63xx_uart.c @@ -35,7 +35,7 @@ #include <bcm63xx_regs.h> #include <bcm63xx_io.h> -#define BCM63XX_NR_UARTS 1 +#define BCM63XX_NR_UARTS 2 static struct uart_port ports[BCM63XX_NR_UARTS]; @@ -784,7 +784,7 @@ static struct uart_driver bcm_uart_driver = { .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, - .nr = 1, + .nr = BCM63XX_NR_UARTS, .cons = BCM63XX_CONSOLE, }; @@ -826,11 +826,12 @@ static int __devinit bcm_uart_probe(struct platform_device *pdev) port->dev = &pdev->dev; port->fifosize = 16; port->uartclk = clk_get_rate(clk) / 2; + port->line = pdev->id; clk_put(clk); ret = uart_add_one_port(&bcm_uart_driver, port); if (ret) { - kfree(port); + ports[pdev->id].membase = 0; return ret; } platform_set_drvdata(pdev, port); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 50abb7e557f..fcf273e3f48 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/ioport.h> +#include <linux/io.h> #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> @@ -237,7 +238,8 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdb_connected && kgdboc_port_line == uart->port.line) + if (kgdb_connected && kgdboc_port_line == uart->port.line + && kgdboc_break_enabled) if (ch == 0x3) {/* Ctrl + C */ kgdb_breakpoint(); return; @@ -488,6 +490,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; + dma_disable_irq(uart->tx_dma_channel); dma_disable_irq(uart->rx_dma_channel); spin_lock_bh(&uart->port.lock); @@ -521,6 +524,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) } spin_unlock_bh(&uart->port.lock); + dma_enable_irq(uart->tx_dma_channel); dma_enable_irq(uart->rx_dma_channel); mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); @@ -746,15 +750,6 @@ static int bfin_serial_startup(struct uart_port *port) Status interrupt.\n"); } - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_output(uart->cts_pin, 1); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } - /* CTS RTS PINs are negative assertive. */ UART_PUT_MCR(uart, ACTS); UART_SET_IER(uart, EDSSI); @@ -801,10 +796,6 @@ static void bfin_serial_shutdown(struct uart_port *port) gpio_free(uart->rts_pin); #endif #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0) - gpio_free(uart->cts_pin); - if (uart->rts_pin >= 0) - gpio_free(uart->rts_pin); if (UART_GET_IER(uart) && EDSSI) free_irq(uart->status_irq, uart); #endif @@ -1409,8 +1400,7 @@ static int bfin_serial_remove(struct platform_device *dev) continue; uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port); bfin_serial_ports[i].port.dev = NULL; -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) gpio_free(bfin_serial_ports[i].cts_pin); gpio_free(bfin_serial_ports[i].rts_pin); #endif diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 088bb35475f..7c72888fbf9 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -1,27 +1,11 @@ /* - * File: linux/drivers/serial/bfin_sport_uart.c + * Blackfin On-Chip Sport Emulated UART Driver * - * Based on: drivers/serial/bfin_5xx.c by Aubrey Li. - * Author: Roy Huang <roy.huang@analog.com> + * Copyright 2006-2009 Analog Devices Inc. * - * Created: Nov 22, 2006 - * Copyright: (c) 2006-2007 Analog Devices Inc. - * Description: this driver enable SPORTs on Blackfin emulate UART. + * Enter bugs at http://blackfin.uclinux.org/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ /* @@ -29,39 +13,18 @@ * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. */ -/* After reset, there is a prelude of low level pulse when transmit data first - * time. No addtional pulse in following transmit. - * According to document: - * The SPORTs are ready to start transmitting or receiving data no later than - * three serial clock cycles after they are enabled in the SPORTx_TCR1 or - * SPORTx_RCR1 register. No serial clock cycles are lost from this point on. - * The first internal frame sync will occur one frame sync delay after the - * SPORTs are ready. External frame syncs can occur as soon as the SPORT is - * ready. - */ +/* #define DEBUG */ -/* Thanks to Axel Alatalo <axel@rubico.se> for fixing sport rx bug. Sometimes - * sport receives data incorrectly. The following is Axel's words. - * As EE-191, sport rx samples 3 times of the UART baudrate and takes the - * middle smaple of every 3 samples as the data bit. For a 8-N-1 UART setting, - * 30 samples will be required for a byte. If transmitter sends a 1/3 bit short - * byte due to buadrate drift, then the 30th sample of a byte, this sample is - * also the third sample of the stop bit, will happens on the immediately - * following start bit which will be thrown away and missed. Thus since parts - * of the startbit will be missed and the receiver will begin to drift, the - * effect accumulates over time until synchronization is lost. - * If only require 2 samples of the stopbit (by sampling in total 29 samples), - * then a to short byte as in the case above will be tolerated. Then the 1/3 - * early startbit will trigger a framesync since the last read is complete - * after only 2/3 stopbit and framesync is active during the last 1/3 looking - * for a possible early startbit. */ - -//#define DEBUG +#define DRV_NAME "bfin-sport-uart" +#define DEVICE_NAME "ttySS" +#define pr_fmt(fmt) DRV_NAME ": " fmt #include <linux/module.h> #include <linux/ioport.h> +#include <linux/io.h> #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> @@ -75,23 +38,36 @@ #include "bfin_sport_uart.h" +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART unsigned short bfin_uart_pin_req_sport0[] = {P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0}; - +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART unsigned short bfin_uart_pin_req_sport1[] = {P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0}; - -#define DRV_NAME "bfin-sport-uart" +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +unsigned short bfin_uart_pin_req_sport2[] = + {P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, \ + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +unsigned short bfin_uart_pin_req_sport3[] = + {P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, \ + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0}; +#endif struct sport_uart_port { struct uart_port port; - char *name; - - int tx_irq; - int rx_irq; int err_irq; + unsigned short csize; + unsigned short rxmask; + unsigned short txmask1; + unsigned short txmask2; + unsigned char stopb; +/* unsigned char parib; */ }; static void sport_uart_tx_chars(struct sport_uart_port *up); @@ -99,36 +75,42 @@ static void sport_stop_tx(struct uart_port *port); static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) { - pr_debug("%s value:%x\n", __func__, value); - /* Place a Start and Stop bit */ + pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value, + up->txmask1, up->txmask2); + + /* Place Start and Stop bits */ __asm__ __volatile__ ( - "R2 = b#01111111100;" - "R3 = b#10000000001;" - "%0 <<= 2;" - "%0 = %0 & R2;" - "%0 = %0 | R3;" - : "=d"(value) - : "d"(value) - : "ASTAT", "R2", "R3" + "%[val] <<= 1;" + "%[val] = %[val] & %[mask1];" + "%[val] = %[val] | %[mask2];" + : [val]"+d"(value) + : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2) + : "ASTAT" ); pr_debug("%s value:%x\n", __func__, value); SPORT_PUT_TX(up, value); } -static inline unsigned int rx_one_byte(struct sport_uart_port *up) +static inline unsigned char rx_one_byte(struct sport_uart_port *up) { - unsigned int value, extract; + unsigned int value; + unsigned char extract; u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; - value = SPORT_GET_RX32(up); - pr_debug("%s value:%x\n", __func__, value); + if ((up->csize + up->stopb) > 7) + value = SPORT_GET_RX32(up); + else + value = SPORT_GET_RX(up); + + pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value, + up->csize, up->rxmask); - /* Extract 8 bits data */ + /* Extract data */ __asm__ __volatile__ ( "%[extr] = 0;" - "%[mask1] = 0x1801(Z);" - "%[mask2] = 0x0300(Z);" + "%[mask1] = %[rxmask];" + "%[mask2] = 0x0200(Z);" "%[shift] = 0;" "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" ".Lloop_s:" @@ -138,9 +120,9 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up) "%[mask1] = %[mask1] - %[mask2];" ".Lloop_e:" "%[shift] += 1;" - : [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp), - [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2) - : "d"(value), [lc]"a"(8) + : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp), + [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2) + : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize) : "ASTAT", "LB0", "LC0", "LT0" ); @@ -148,29 +130,28 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up) return extract; } -static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate) +static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) { - int tclkdiv, tfsdiv, rclkdiv; + int tclkdiv, rclkdiv; + unsigned int sclk = get_sclk(); - /* Set TCR1 and TCR2 */ - SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); - SPORT_PUT_TCR2(up, 10); + /* Set TCR1 and TCR2, TFSR is not enabled for uart */ + SPORT_PUT_TCR1(up, (ITFS | TLSBIT | ITCLK)); + SPORT_PUT_TCR2(up, size + 1); pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); /* Set RCR1 and RCR2 */ SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); - SPORT_PUT_RCR2(up, 28); + SPORT_PUT_RCR2(up, (size + 1) * 2 - 1); pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); - tclkdiv = sclk/(2 * baud_rate) - 1; - tfsdiv = 12; - rclkdiv = sclk/(2 * baud_rate * 3) - 1; + tclkdiv = sclk / (2 * baud_rate) - 1; + rclkdiv = sclk / (2 * baud_rate * 2) - 1; SPORT_PUT_TCLKDIV(up, tclkdiv); - SPORT_PUT_TFSDIV(up, tfsdiv); SPORT_PUT_RCLKDIV(up, rclkdiv); SSYNC(); - pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, tfsdiv:%d, rclkdiv:%d\n", - __func__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv); + pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n", + __func__, sclk, baud_rate, tclkdiv, rclkdiv); return 0; } @@ -181,23 +162,29 @@ static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) struct tty_struct *tty = up->port.state->port.tty; unsigned int ch; - do { + spin_lock(&up->port.lock); + + while (SPORT_GET_STAT(up) & RXNE) { ch = rx_one_byte(up); up->port.icount.rx++; - if (uart_handle_sysrq_char(&up->port, ch)) - ; - else + if (!uart_handle_sysrq_char(&up->port, ch)) tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (SPORT_GET_STAT(up) & RXNE); + } tty_flip_buffer_push(tty); + spin_unlock(&up->port.lock); + return IRQ_HANDLED; } static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) { - sport_uart_tx_chars(dev_id); + struct sport_uart_port *up = dev_id; + + spin_lock(&up->port.lock); + sport_uart_tx_chars(up); + spin_unlock(&up->port.lock); return IRQ_HANDLED; } @@ -208,6 +195,8 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) struct tty_struct *tty = up->port.state->port.tty; unsigned int stat = SPORT_GET_STAT(up); + spin_lock(&up->port.lock); + /* Overflow in RX FIFO */ if (stat & ROVF) { up->port.icount.overrun++; @@ -216,15 +205,16 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) } /* These should not happen */ if (stat & (TOVF | TUVF | RUVF)) { - printk(KERN_ERR "SPORT Error:%s %s %s\n", - (stat & TOVF)?"TX overflow":"", - (stat & TUVF)?"TX underflow":"", - (stat & RUVF)?"RX underflow":""); + pr_err("SPORT Error:%s %s %s\n", + (stat & TOVF) ? "TX overflow" : "", + (stat & TUVF) ? "TX underflow" : "", + (stat & RUVF) ? "RX underflow" : ""); SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); } SSYNC(); + spin_unlock(&up->port.lock); return IRQ_HANDLED; } @@ -232,60 +222,37 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) static int sport_startup(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - char buffer[20]; - int retval; + int ret; pr_debug("%s enter\n", __func__); - snprintf(buffer, 20, "%s rx", up->name); - retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); - return retval; + ret = request_irq(up->port.irq, sport_uart_rx_irq, 0, + "SPORT_UART_RX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT RX interrupt\n"); + return ret; } - snprintf(buffer, 20, "%s tx", up->name); - retval = request_irq(up->tx_irq, sport_uart_tx_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); + ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0, + "SPORT_UART_TX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT TX interrupt\n"); goto fail1; } - snprintf(buffer, 20, "%s err", up->name); - retval = request_irq(up->err_irq, sport_uart_err_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); + ret = request_irq(up->err_irq, sport_uart_err_irq, 0, + "SPORT_UART_STATUS", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT status interrupt\n"); goto fail2; } - if (port->line) { - if (peripheral_request_list(bfin_uart_pin_req_sport1, DRV_NAME)) - goto fail3; - } else { - if (peripheral_request_list(bfin_uart_pin_req_sport0, DRV_NAME)) - goto fail3; - } - - sport_uart_setup(up, get_sclk(), port->uartclk); - - /* Enable receive interrupt */ - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) | RSPEN)); - SSYNC(); - return 0; + fail2: + free_irq(up->port.irq+1, up); + fail1: + free_irq(up->port.irq, up); - -fail3: - printk(KERN_ERR DRV_NAME - ": Requesting Peripherals failed\n"); - - free_irq(up->err_irq, up); -fail2: - free_irq(up->tx_irq, up); -fail1: - free_irq(up->rx_irq, up); - - return retval; - + return ret; } static void sport_uart_tx_chars(struct sport_uart_port *up) @@ -344,20 +311,17 @@ static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) static void sport_stop_tx(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned int stat; pr_debug("%s enter\n", __func__); - stat = SPORT_GET_STAT(up); - while(!(stat & TXHRE)) { - udelay(1); - stat = SPORT_GET_STAT(up); - } /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. If baud rate is lower than default, - * delay should be longer. For example, if the baud rate is 9600, - * the delay must be at least 2ms by experience */ - udelay(500); + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); SSYNC(); @@ -370,6 +334,7 @@ static void sport_start_tx(struct uart_port *port) struct sport_uart_port *up = (struct sport_uart_port *)port; pr_debug("%s enter\n", __func__); + /* Write data into SPORT FIFO before enable SPROT to transmit */ sport_uart_tx_chars(up); @@ -403,37 +368,24 @@ static void sport_shutdown(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - pr_debug("%s enter\n", __func__); + dev_dbg(port->dev, "%s enter\n", __func__); /* Disable sport */ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); SSYNC(); - if (port->line) { - peripheral_free_list(bfin_uart_pin_req_sport1); - } else { - peripheral_free_list(bfin_uart_pin_req_sport0); - } - - free_irq(up->rx_irq, up); - free_irq(up->tx_irq, up); + free_irq(up->port.irq, up); + free_irq(up->port.irq+1, up); free_irq(up->err_irq, up); } -static void sport_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); - uart_update_timeout(port, CS8 ,port->uartclk); -} - static const char *sport_type(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; pr_debug("%s enter\n", __func__); - return up->name; + return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL; } static void sport_release_port(struct uart_port *port) @@ -461,6 +413,110 @@ static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) return 0; } +static void sport_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + unsigned long flags; + int i; + + pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); + + switch (termios->c_cflag & CSIZE) { + case CS8: + up->csize = 8; + break; + case CS7: + up->csize = 7; + break; + case CS6: + up->csize = 6; + break; + case CS5: + up->csize = 5; + break; + default: + pr_warning("requested word length not supported\n"); + } + + if (termios->c_cflag & CSTOPB) { + up->stopb = 1; + } + if (termios->c_cflag & PARENB) { + pr_warning("PAREN bits is not supported yet\n"); + /* up->parib = 1; */ + } + + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } + + /* RX extract mask */ + up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); + /* TX masks, 8 bit data and 1 bit stop for example: + * mask1 = b#0111111110 + * mask2 = b#1000000000 + */ + for (i = 0, up->txmask1 = 0; i < up->csize; i++) + up->txmask1 |= (1<<i); + up->txmask2 = (1<<i); + if (up->stopb) { + ++i; + up->txmask2 |= (1<<i); + } + up->txmask1 <<= 1; + up->txmask2 <<= 1; + /* uart baud rate */ + port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); + + spin_lock_irqsave(&up->port.lock, flags); + + /* Disable UART */ + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); + + sport_uart_setup(up, up->csize + up->stopb, port->uartclk); + + /* driver TX line high after config, one dummy data is + * necessary to stop sport after shift one byte + */ + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SSYNC(); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, port->uartclk); + + /* Enable sport rx */ + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN); + SSYNC(); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + struct uart_ops sport_uart_ops = { .tx_empty = sport_tx_empty, .set_mctrl = sport_set_mctrl, @@ -480,138 +536,319 @@ struct uart_ops sport_uart_ops = { .verify_port = sport_verify_port, }; -static struct sport_uart_port sport_uart_ports[] = { - { /* SPORT 0 */ - .name = "SPORT0", - .tx_irq = IRQ_SPORT0_TX, - .rx_irq = IRQ_SPORT0_RX, - .err_irq= IRQ_SPORT0_ERROR, - .port = { - .type = PORT_BFIN_SPORT, - .iotype = UPIO_MEM, - .membase = (void __iomem *)SPORT0_TCR1, - .mapbase = SPORT0_TCR1, - .irq = IRQ_SPORT0_RX, - .uartclk = CONFIG_SPORT_BAUD_RATE, - .fifosize = 8, - .ops = &sport_uart_ops, - .line = 0, - }, - }, { /* SPORT 1 */ - .name = "SPORT1", - .tx_irq = IRQ_SPORT1_TX, - .rx_irq = IRQ_SPORT1_RX, - .err_irq= IRQ_SPORT1_ERROR, - .port = { - .type = PORT_BFIN_SPORT, - .iotype = UPIO_MEM, - .membase = (void __iomem *)SPORT1_TCR1, - .mapbase = SPORT1_TCR1, - .irq = IRQ_SPORT1_RX, - .uartclk = CONFIG_SPORT_BAUD_RATE, - .fifosize = 8, - .ops = &sport_uart_ops, - .line = 1, - }, +#define BFIN_SPORT_UART_MAX_PORTS 4 + +static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS]; + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +static int __init +sport_uart_console_setup(struct console *co, char *options) +{ + struct sport_uart_port *up; + int baud = 57600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* Check whether an invalid uart number has been specified */ + if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS) + return -ENODEV; + + up = bfin_sport_uart_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static void sport_uart_console_putchar(struct uart_port *port, int ch) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + while (SPORT_GET_STAT(up) & TXF) + barrier(); + + tx_one_byte(up, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void +sport_uart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sport_uart_port *up = bfin_sport_uart_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + if (SPORT_GET_TCR1(up) & TSPEN) + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + else { + /* dummy data to start sport */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + /* Enable transmit, then an interrupt will generated */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + + /* Although the hold register is empty, last byte is still in shift + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + barrier(); + + /* Stop sport tx transfer */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SSYNC(); } + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sport_uart_reg; + +static struct console sport_uart_console = { + .name = DEVICE_NAME, + .write = sport_uart_console_write, + .device = uart_console_device, + .setup = sport_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sport_uart_reg, }; +#define SPORT_UART_CONSOLE (&sport_uart_console) +#else +#define SPORT_UART_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */ + + static struct uart_driver sport_uart_reg = { .owner = THIS_MODULE, - .driver_name = "SPORT-UART", - .dev_name = "ttySS", + .driver_name = DRV_NAME, + .dev_name = DEVICE_NAME, .major = 204, .minor = 84, - .nr = ARRAY_SIZE(sport_uart_ports), - .cons = NULL, + .nr = BFIN_SPORT_UART_MAX_PORTS, + .cons = SPORT_UART_CONSOLE, }; -static int sport_uart_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM +static int sport_uart_suspend(struct device *dev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = dev_get_drvdata(dev); - pr_debug("%s enter\n", __func__); + dev_dbg(dev, "%s enter\n", __func__); if (sport) uart_suspend_port(&sport_uart_reg, &sport->port); return 0; } -static int sport_uart_resume(struct platform_device *dev) +static int sport_uart_resume(struct device *dev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = dev_get_drvdata(dev); - pr_debug("%s enter\n", __func__); + dev_dbg(dev, "%s enter\n", __func__); if (sport) uart_resume_port(&sport_uart_reg, &sport->port); return 0; } -static int sport_uart_probe(struct platform_device *dev) +static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { + .suspend = sport_uart_suspend, + .resume = sport_uart_resume, +}; +#endif + +static int __devinit sport_uart_probe(struct platform_device *pdev) { - pr_debug("%s enter\n", __func__); - sport_uart_ports[dev->id].port.dev = &dev->dev; - uart_add_one_port(&sport_uart_reg, &sport_uart_ports[dev->id].port); - platform_set_drvdata(dev, &sport_uart_ports[dev->id]); + struct resource *res; + struct sport_uart_port *sport; + int ret = 0; - return 0; + dev_dbg(&pdev->dev, "%s enter\n", __func__); + + if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) { + dev_err(&pdev->dev, "Wrong sport uart platform device id.\n"); + return -ENOENT; + } + + if (bfin_sport_uart_ports[pdev->id] == NULL) { + bfin_sport_uart_ports[pdev->id] = + kmalloc(sizeof(struct sport_uart_port), GFP_KERNEL); + sport = bfin_sport_uart_ports[pdev->id]; + if (!sport) { + dev_err(&pdev->dev, + "Fail to kmalloc sport_uart_port\n"); + return -ENOMEM; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, + "Fail to request SPORT peripherals\n"); + goto out_error_free_mem; + } + + spin_lock_init(&sport->port.lock); + sport->port.fifosize = SPORT_TX_FIFO_SIZE, + sport->port.ops = &sport_uart_ops; + sport->port.line = pdev->id; + sport->port.iotype = UPIO_MEM; + sport->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + sport->port.membase = ioremap(res->start, + res->end - res->start); + if (!sport->port.membase) { + dev_err(&pdev->dev, "Cannot map sport IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + + sport->port.irq = platform_get_irq(pdev, 0); + if (sport->port.irq < 0) { + dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + + sport->err_irq = platform_get_irq(pdev, 1); + if (sport->err_irq < 0) { + dev_err(&pdev->dev, "No sport status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + } + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + sport = bfin_sport_uart_ports[pdev->id]; + sport->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, sport); + ret = uart_add_one_port(&sport_uart_reg, &sport->port); +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + } +#endif + if (!ret) + return 0; + + if (sport) { +out_error_unmap: + iounmap(sport->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } + + return ret; } -static int sport_uart_remove(struct platform_device *dev) +static int __devexit sport_uart_remove(struct platform_device *pdev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = platform_get_drvdata(pdev); - pr_debug("%s enter\n", __func__); - platform_set_drvdata(dev, NULL); + dev_dbg(&pdev->dev, "%s enter\n", __func__); + dev_set_drvdata(&pdev->dev, NULL); - if (sport) + if (sport) { uart_remove_one_port(&sport_uart_reg, &sport->port); + iounmap(sport->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } return 0; } static struct platform_driver sport_uart_driver = { .probe = sport_uart_probe, - .remove = sport_uart_remove, - .suspend = sport_uart_suspend, - .resume = sport_uart_resume, + .remove = __devexit_p(sport_uart_remove), .driver = { .name = DRV_NAME, +#ifdef CONFIG_PM + .pm = &bfin_sport_uart_dev_pm_ops, +#endif }, }; +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +static __initdata struct early_platform_driver early_sport_uart_driver = { + .class_str = DRV_NAME, + .pdrv = &sport_uart_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init sport_uart_rs_console_init(void) +{ + early_platform_driver_register(&early_sport_uart_driver, DRV_NAME); + + early_platform_driver_probe(DRV_NAME, BFIN_SPORT_UART_MAX_PORTS, 0); + + register_console(&sport_uart_console); + + return 0; +} +console_initcall(sport_uart_rs_console_init); +#endif + static int __init sport_uart_init(void) { int ret; - pr_debug("%s enter\n", __func__); + pr_info("Serial: Blackfin uart over sport driver\n"); + ret = uart_register_driver(&sport_uart_reg); - if (ret != 0) { - printk(KERN_ERR "Failed to register %s:%d\n", + if (ret) { + pr_err("failed to register %s:%d\n", sport_uart_reg.driver_name, ret); return ret; } ret = platform_driver_register(&sport_uart_driver); - if (ret != 0) { - printk(KERN_ERR "Failed to register sport uart driver:%d\n", ret); + if (ret) { + pr_err("failed to register sport uart driver:%d\n", ret); uart_unregister_driver(&sport_uart_reg); } - - pr_debug("%s exit\n", __func__); return ret; } +module_init(sport_uart_init); static void __exit sport_uart_exit(void) { - pr_debug("%s enter\n", __func__); platform_driver_unregister(&sport_uart_driver); uart_unregister_driver(&sport_uart_reg); } - -module_init(sport_uart_init); module_exit(sport_uart_exit); +MODULE_AUTHOR("Sonic Zhang, Roy Huang"); +MODULE_DESCRIPTION("Blackfin serial over SPORT driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h index 671d41cc1a3..abe03614e4d 100644 --- a/drivers/serial/bfin_sport_uart.h +++ b/drivers/serial/bfin_sport_uart.h @@ -1,29 +1,23 @@ /* - * File: linux/drivers/serial/bfin_sport_uart.h + * Blackfin On-Chip Sport Emulated UART Driver * - * Based on: include/asm-blackfin/mach-533/bfin_serial_5xx.h - * Author: Roy Huang <roy.huang>analog.com> + * Copyright 2006-2008 Analog Devices Inc. * - * Created: Nov 22, 2006 - * Copyright: (C) Analog Device Inc. - * Description: this driver enable SPORTs on Blackfin emulate UART. + * Enter bugs at http://blackfin.uclinux.org/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ +/* + * This driver and the hardware supported are in term of EE-191 of ADI. + * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf + * This application note describe how to implement a UART on a Sharc DSP, + * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. + */ + +#ifndef _BFIN_SPORT_UART_H +#define _BFIN_SPORT_UART_H #define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ #define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ @@ -61,3 +55,7 @@ #define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) #define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) #define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) + +#define SPORT_TX_FIFO_SIZE 8 + +#endif /* _BFIN_SPORT_UART_H */ diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 0028b6f89ce..53a46822705 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -751,7 +751,6 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) trace(icom_port, "FID_STATUS", status); count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); - count = tty_buffer_request_room(tty, count); trace(icom_port, "RCV_COUNT", count); trace(icom_port, "REAL_COUNT", count); @@ -1654,4 +1653,6 @@ MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); MODULE_SUPPORTED_DEVICE ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); MODULE_LICENSE("GPL"); - +MODULE_FIRMWARE("icom_call_setup.bin"); +MODULE_FIRMWARE("icom_res_dce.bin"); +MODULE_FIRMWARE("icom_asc.bin"); diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 60d665a17a8..d00fcf8e6c7 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1279,7 +1279,7 @@ static int serial_imx_probe(struct platform_device *pdev) sport->use_irda = 1; #endif - if (pdata->init) { + if (pdata && pdata->init) { ret = pdata->init(pdev); if (ret) goto clkput; @@ -1292,7 +1292,7 @@ static int serial_imx_probe(struct platform_device *pdev) return 0; deinit: - if (pdata->exit) + if (pdata && pdata->exit) pdata->exit(pdev); clkput: clk_put(sport->clk); @@ -1321,7 +1321,7 @@ static int serial_imx_remove(struct platform_device *pdev) clk_disable(sport->clk); - if (pdata->exit) + if (pdata && pdata->exit) pdata->exit(pdev); iounmap(sport->port.membase); diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 85dc0410ac1..23ba6b40b3a 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -1411,8 +1411,7 @@ static int receive_chars(struct uart_port *the_port) read_count = do_read(the_port, ch, MAX_CHARS); if (read_count > 0) { flip = 1; - read_room = tty_buffer_request_room(tty, read_count); - tty_insert_flip_string(tty, ch, read_room); + read_room = tty_insert_flip_string(tty, ch, read_count); the_port->icount.rx += read_count; } spin_unlock_irqrestore(&the_port->lock, pflags); diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 108c3e0471f..12cb5e446a4 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -179,6 +179,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device return 0; out_free_irq: + jsm_remove_uart_port(brd); free_irq(brd->irq, brd); out_iounmap: iounmap(brd->re_map_membase); diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index cd95e215550..5673ca9dfdc 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -432,7 +432,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd) int jsm_uart_port_init(struct jsm_board *brd) { - int i; + int i, rc; unsigned int line; struct jsm_channel *ch; @@ -467,8 +467,11 @@ int jsm_uart_port_init(struct jsm_board *brd) } else set_bit(line, linemap); brd->channels[i]->uart_port.line = line; - if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port)) - printk(KERN_INFO "jsm: add device failed\n"); + rc = uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port); + if (rc){ + printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i); + return rc; + } else printk(KERN_INFO "jsm: Port %d added\n", i); } diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c index b05c5aa02cb..ecdc0facf7e 100644 --- a/drivers/serial/msm_serial.c +++ b/drivers/serial/msm_serial.c @@ -691,6 +691,7 @@ static int __init msm_serial_probe(struct platform_device *pdev) struct msm_port *msm_port; struct resource *resource; struct uart_port *port; + int irq; if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) return -ENXIO; @@ -711,9 +712,10 @@ static int __init msm_serial_probe(struct platform_device *pdev) return -ENXIO; port->mapbase = resource->start; - port->irq = platform_get_irq(pdev, 0); - if (unlikely(port->irq < 0)) + irq = platform_get_irq(pdev, 0); + if (unlikely(irq < 0)) return -ENXIO; + port->irq = irq; platform_set_drvdata(pdev, port); diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 34b31da01d0..7bf10264a6a 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -421,7 +421,7 @@ static struct uart_driver timbuart_driver = { static int timbuart_probe(struct platform_device *dev) { - int err; + int err, irq; struct timbuart_port *uart; struct resource *iomem; @@ -453,11 +453,12 @@ static int timbuart_probe(struct platform_device *dev) uart->port.mapbase = iomem->start; uart->port.membase = NULL; - uart->port.irq = platform_get_irq(dev, 0); - if (uart->port.irq < 0) { + irq = platform_get_irq(dev, 0); + if (irq < 0) { err = -EINVAL; goto err_register; } + uart->port.irq = irq; tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart); diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 1296a097f5c..84f08e968e0 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -789,6 +789,13 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) return 1; } +#ifdef KEYSPAN +MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); +#endif +#ifdef XIRCOM +MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); +#endif + static int keyspan_pda_startup(struct usb_serial *serial) { |