aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/ide-iops.c2
-rw-r--r--drivers/ide/pci/cs5520.c29
-rw-r--r--drivers/ide/setup-pci.c10
3 files changed, 25 insertions, 16 deletions
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c97c0719ddf..e3e5e39f490 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -799,7 +799,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
- if (speed >= XFER_SW_DMA_0)
+ if (speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA))
hwif->dma_host_on(drive);
else if (hwif->ide_dma_on) /* check if host supports DMA */
hwif->dma_off_quietly(drive);
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index d1a91bcb5b2..78058ca2ce7 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -71,7 +71,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *pdev = hwif->pci_dev;
int controller = drive->dn > 1 ? 1 : 0;
- u8 reg;
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
@@ -91,11 +90,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
-
- /* Set the DMA enable/disable flag */
- reg = inb(hwif->dma_base + 0x02 + 8*controller);
- reg |= 1<<((drive->dn&1)+5);
- outb(reg, hwif->dma_base + 0x02 + 8*controller);
}
static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
@@ -109,13 +103,23 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
* We wrap the DMA activate to set the vdma flag. This is needed
* so that the IDE DMA layer issues PIO not DMA commands over the
* DMA channel
+ *
+ * ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA
*/
-
-static int cs5520_dma_on(ide_drive_t *drive)
+
+static void cs5520_dma_host_on(ide_drive_t *drive)
{
- /* ATAPI is harder so leave it for now */
- drive->vdma = 1;
- return 0;
+ if (drive->using_dma)
+ drive->vdma = 1;
+
+ ide_dma_host_on(drive);
+}
+
+static void cs5520_dma_host_off(ide_drive_t *drive)
+{
+ drive->vdma = 0;
+
+ ide_dma_host_off(drive);
}
static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
@@ -126,7 +130,8 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
if (hwif->dma_base == 0)
return;
- hwif->ide_dma_on = &cs5520_dma_on;
+ hwif->dma_host_on = &cs5520_dma_host_on;
+ hwif->dma_host_off = &cs5520_dma_host_off;
}
#define DECLARE_CS_DEV(name_str) \
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index d2cd5a3d38f..bbfdf7e0f18 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -165,13 +165,17 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_
dma_base = pci_resource_start(dev, baridx);
- if (dma_base == 0)
+ if (dma_base == 0) {
printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
+ return 0;
+ }
}
- if ((d->host_flags & IDE_HFLAG_CS5520) == 0 && dma_base) {
+ if (hwif->channel)
+ dma_base += 8;
+
+ if ((d->host_flags & IDE_HFLAG_CS5520) == 0) {
u8 simplex_stat = 0;
- dma_base += hwif->channel ? 8 : 0;
switch(dev->device) {
case PCI_DEVICE_ID_AL_M5219: