diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/ath/ar9170/phy.c | 165 |
1 files changed, 164 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c index 108ebfe21fc..b3e5cf3735b 100644 --- a/drivers/net/wireless/ath/ar9170/phy.c +++ b/drivers/net/wireless/ath/ar9170/phy.c @@ -556,7 +556,6 @@ int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band) if (err) return err; - /* TODO: (heavy clip) regulatory domain power level fine-tuning. */ err = ar9170_init_phy_from_eeprom(ar, is_2ghz, is_40mhz); if (err) return err; @@ -1238,6 +1237,164 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar, return ar9170_regwrite_result(); } +static u8 ar9170_get_max_edge_power(struct ar9170 *ar, + struct ar9170_calctl_edges edges[], + u32 freq) +{ +/* TODO: move somewhere else */ +#define AR5416_MAX_RATE_POWER 63 + + int i; + u8 rc = AR5416_MAX_RATE_POWER; + u8 f; + if (freq < 3000) + f = freq - 2300; + else + f = (freq - 4800) / 5; + + for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) { + if (edges[i].channel == 0xff) + break; + if (f == edges[i].channel) { + /* exact freq match */ + rc = edges[i].power_flags & ~AR9170_CALCTL_EDGE_FLAGS; + break; + } + if (i > 0 && f < edges[i].channel) { + if (f > edges[i-1].channel && + edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) { + /* lower channel has the inband flag set */ + rc = edges[i-1].power_flags & + ~AR9170_CALCTL_EDGE_FLAGS; + } + break; + } + } + + if (i == AR5416_NUM_BAND_EDGES) { + if (f > edges[i-1].channel && + edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) { + /* lower channel has the inband flag set */ + rc = edges[i-1].power_flags & + ~AR9170_CALCTL_EDGE_FLAGS; + } + } + return rc; +} + +/* calculate the conformance test limits and apply them to ar->power* + * (derived from otus hal/hpmain.c, line 3706 ff.) + */ +static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw) +{ + u8 ctl_grp; /* CTL group */ + u8 ctl_idx; /* CTL index */ + int i, j; + struct ctl_modes { + u8 ctl_mode; + u8 max_power; + u8 *pwr_cal_data; + int pwr_cal_len; + } *modes; + + /* order is relevant in the mode_list_*: we fall back to the + * lower indices if any mode is missed in the EEPROM. + */ + struct ctl_modes mode_list_2ghz[] = { + { CTL_11B, 0, ar->power_2G_cck, 4 }, + { CTL_11G, 0, ar->power_2G_ofdm, 4 }, + { CTL_2GHT20, 0, ar->power_2G_ht20, 8 }, + { CTL_2GHT40, 0, ar->power_2G_ht40, 8 }, + }; + struct ctl_modes mode_list_5ghz[] = { + { CTL_11A, 0, ar->power_5G_leg, 4 }, + { CTL_5GHT20, 0, ar->power_5G_ht20, 8 }, + { CTL_5GHT40, 0, ar->power_5G_ht40, 8 }, + }; + int nr_modes; + +#define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n]) + + /* TODO: investigate the differences between OTUS' + * hpreg.c::zfHpGetRegulatoryDomain() and + * ath/regd.c::ath_regd_get_band_ctl() - + * e.g. for FCC3_WORLD the OTUS procedure + * always returns CTL_FCC, while the one in ath/ delivers + * CTL_ETSI for 2GHz and CTL_FCC for 5GHz. + */ + ctl_grp = ath_regd_get_band_ctl(&ar->common.regulatory, + ar->hw->conf.channel->band); + + /* ctl group not found - either invalid band (NO_CTL) or ww roaming */ + if (ctl_grp == NO_CTL || ctl_grp == SD_NO_CTL) + ctl_grp = CTL_FCC; + + if (ctl_grp != CTL_FCC) + /* skip CTL and heavy clip for CTL_MKK and CTL_ETSI */ + return; + + if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) { + modes = mode_list_2ghz; + nr_modes = ARRAY_SIZE(mode_list_2ghz); + } else { + modes = mode_list_5ghz; + nr_modes = ARRAY_SIZE(mode_list_5ghz); + } + + for (i = 0; i < nr_modes; i++) { + u8 c = ctl_grp | modes[i].ctl_mode; + for (ctl_idx = 0; ctl_idx < AR5416_NUM_CTLS; ctl_idx++) + if (c == ar->eeprom.ctl_index[ctl_idx]) + break; + if (ctl_idx < AR5416_NUM_CTLS) { + int f_off = 0; + + /* adjust freq for 40MHz */ + if (modes[i].ctl_mode == CTL_2GHT40 || + modes[i].ctl_mode == CTL_5GHT40) { + if (bw == AR9170_BW_40_BELOW) + f_off = -10; + else + f_off = 10; + } + + modes[i].max_power = + ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1), + freq+f_off); + + /* TODO: check if the regulatory max. power is + * controlled by cfg80211 for DFS + * (hpmain applies it to max_power itself for DFS freq) + */ + + } else { + /* Workaround in otus driver, hpmain.c, line 3906: + * if no data for 5GHT20 are found, take the + * legacy 5G value. + * We extend this here to fallback from any other *HT or + * 11G, too. + */ + int k = i; + + modes[i].max_power = AR5416_MAX_RATE_POWER; + while (k-- > 0) { + if (modes[k].max_power != + AR5416_MAX_RATE_POWER) { + modes[i].max_power = modes[k].max_power; + break; + } + } + } + + /* apply max power to pwr_cal_data (ar->power_*) */ + for (j = 0; j < modes[i].pwr_cal_len; j++) { + modes[i].pwr_cal_data[j] = min(modes[i].pwr_cal_data[j], + modes[i].max_power); + } + } +#undef EDGES +} + static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw) { struct ar9170_calibration_target_power_legacy *ctpl; @@ -1340,6 +1497,12 @@ static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw) ctph[idx + 1].power[n]); } + + /* calc. conformance test limits and apply to ar->power*[] */ + ar9170_calc_ctl(ar, freq, bw); + + /* TODO: (heavy clip) regulatory domain power level fine-tuning. */ + /* set ACK/CTS TX power */ ar9170_regwrite_begin(ar); |