diff options
Diffstat (limited to 'include/asm-powerpc/cell-regs.h')
| -rw-r--r-- | include/asm-powerpc/cell-regs.h | 315 |
1 files changed, 0 insertions, 315 deletions
diff --git a/include/asm-powerpc/cell-regs.h b/include/asm-powerpc/cell-regs.h deleted file mode 100644 index fd6fd00434e..00000000000 --- a/include/asm-powerpc/cell-regs.h +++ /dev/null @@ -1,315 +0,0 @@ -/* - * cbe_regs.h - * - * This file is intended to hold the various register definitions for CBE - * on-chip system devices (memory controller, IO controller, etc...) - * - * (C) Copyright IBM Corporation 2001,2006 - * - * Authors: Maximino Aguilar (maguilar@us.ibm.com) - * David J. Erb (djerb@us.ibm.com) - * - * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. - */ - -#ifndef CBE_REGS_H -#define CBE_REGS_H - -#include <asm/cell-pmu.h> - -/* - * - * Some HID register definitions - * - */ - -/* CBE specific HID0 bits */ -#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul -#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul -#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul -#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul - -#define MAX_CBE 2 - -/* - * - * Pervasive unit register definitions - * - */ - -union spe_reg { - u64 val; - u8 spe[8]; -}; - -union ppe_spe_reg { - u64 val; - struct { - u32 ppe; - u32 spe; - }; -}; - - -struct cbe_pmd_regs { - /* Debug Bus Control */ - u64 pad_0x0000; /* 0x0000 */ - - u64 group_control; /* 0x0008 */ - - u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ - - u64 debug_bus_control; /* 0x00a8 */ - - u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ - - u64 trace_aux_data; /* 0x0100 */ - u64 trace_buffer_0_63; /* 0x0108 */ - u64 trace_buffer_64_127; /* 0x0110 */ - u64 trace_address; /* 0x0118 */ - u64 ext_tr_timer; /* 0x0120 */ - - u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ - - /* Performance Monitor */ - u64 pm_status; /* 0x0400 */ - u64 pm_control; /* 0x0408 */ - u64 pm_interval; /* 0x0410 */ - u64 pm_ctr[4]; /* 0x0418 */ - u64 pm_start_stop; /* 0x0438 */ - u64 pm07_control[8]; /* 0x0440 */ - - u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ - - /* Thermal Sensor Registers */ - union spe_reg ts_ctsr1; /* 0x0800 */ - u64 ts_ctsr2; /* 0x0808 */ - union spe_reg ts_mtsr1; /* 0x0810 */ - u64 ts_mtsr2; /* 0x0818 */ - union spe_reg ts_itr1; /* 0x0820 */ - u64 ts_itr2; /* 0x0828 */ - u64 ts_gitr; /* 0x0830 */ - u64 ts_isr; /* 0x0838 */ - u64 ts_imr; /* 0x0840 */ - union spe_reg tm_cr1; /* 0x0848 */ - u64 tm_cr2; /* 0x0850 */ - u64 tm_simr; /* 0x0858 */ - union ppe_spe_reg tm_tpr; /* 0x0860 */ - union spe_reg tm_str1; /* 0x0868 */ - u64 tm_str2; /* 0x0870 */ - union ppe_spe_reg tm_tsr; /* 0x0878 */ - - /* Power Management */ - u64 pmcr; /* 0x0880 */ -#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 - u64 pmsr; /* 0x0888 */ - - /* Time Base Register */ - u64 tbr; /* 0x0890 */ - - u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ - - /* Fault Isolation Registers */ - u64 checkstop_fir; /* 0x0c00 */ - u64 recoverable_fir; /* 0x0c08 */ - u64 spec_att_mchk_fir; /* 0x0c10 */ - u32 fir_mode_reg; /* 0x0c18 */ - u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ -#define CBE_PMD_FIR_MODE_M8 0x00800 - u64 fir_enable_mask; /* 0x0c20 */ - - u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ - u64 ras_esc_0; /* 0x0ca8 */ - u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ -}; - -extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); -extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); - -/* - * PMU shadow registers - * - * Many of the registers in the performance monitoring unit are write-only, - * so we need to save a copy of what we write to those registers. - * - * The actual data counters are read/write. However, writing to the counters - * only takes effect if the PMU is enabled. Otherwise the value is stored in - * a hardware latch until the next time the PMU is enabled. So we save a copy - * of the counter values if we need to read them back while the PMU is - * disabled. The counter_value_in_latch field is a bitmap indicating which - * counters currently have a value waiting to be written. - */ - -struct cbe_pmd_shadow_regs { - u32 group_control; - u32 debug_bus_control; - u32 trace_address; - u32 ext_tr_timer; - u32 pm_status; - u32 pm_control; - u32 pm_interval; - u32 pm_start_stop; - u32 pm07_control[NR_CTRS]; - - u32 pm_ctr[NR_PHYS_CTRS]; - u32 counter_value_in_latch; -}; - -extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); -extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); - -/* - * - * IIC unit register definitions - * - */ - -struct cbe_iic_pending_bits { - u32 data; - u8 flags; - u8 class; - u8 source; - u8 prio; -}; - -#define CBE_IIC_IRQ_VALID 0x80 -#define CBE_IIC_IRQ_IPI 0x40 - -struct cbe_iic_thread_regs { - struct cbe_iic_pending_bits pending; - struct cbe_iic_pending_bits pending_destr; - u64 generate; - u64 prio; -}; - -struct cbe_iic_regs { - u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ - - /* IIC interrupt registers */ - struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ - - u64 iic_ir; /* 0x0440 */ -#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) -#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) -#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) -#define CBE_IIC_IR_IOC_0 0x0 -#define CBE_IIC_IR_IOC_1S 0xb -#define CBE_IIC_IR_PT_0 0xe -#define CBE_IIC_IR_PT_1 0xf - - u64 iic_is; /* 0x0448 */ -#define CBE_IIC_IS_PMI 0x2 - - u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ - - /* IOC FIR */ - u64 ioc_fir_reset; /* 0x0500 */ - u64 ioc_fir_set; /* 0x0508 */ - u64 ioc_checkstop_enable; /* 0x0510 */ - u64 ioc_fir_error_mask; /* 0x0518 */ - u64 ioc_syserr_enable; /* 0x0520 */ - u64 ioc_fir; /* 0x0528 */ - - u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ -}; - -extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); -extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); - - -struct cbe_mic_tm_regs { - u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ - - u64 mic_ctl_cnfg2; /* 0x0040 */ -#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL -#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL -#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL -#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL - - u64 pad_0x0048; /* 0x0048 */ - - u64 mic_aux_trc_base; /* 0x0050 */ - u64 mic_aux_trc_max_addr; /* 0x0058 */ - u64 mic_aux_trc_cur_addr; /* 0x0060 */ - u64 mic_aux_trc_grf_addr; /* 0x0068 */ - u64 mic_aux_trc_grf_data; /* 0x0070 */ - - u64 pad_0x0078; /* 0x0078 */ - - u64 mic_ctl_cnfg_0; /* 0x0080 */ -#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL - - u64 pad_0x0088; /* 0x0088 */ - - u64 slow_fast_timer_0; /* 0x0090 */ - u64 slow_next_timer_0; /* 0x0098 */ - - u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */ - u64 mic_df_ecc_address_0; /* 0x00f8 */ - - u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */ - u64 mic_df_ecc_address_1; /* 0x01b8 */ - - u64 mic_ctl_cnfg_1; /* 0x01c0 */ -#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL - - u64 pad_0x01c8; /* 0x01c8 */ - - u64 slow_fast_timer_1; /* 0x01d0 */ - u64 slow_next_timer_1; /* 0x01d8 */ - - u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */ - u64 mic_exc; /* 0x0208 */ -#define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL -#define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL - - u64 mic_mnt_cfg; /* 0x0210 */ -#define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL -#define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL - - u64 mic_df_config; /* 0x0218 */ -#define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL -#define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL -#define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL -#define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL - - u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */ - u64 mic_fir; /* 0x0230 */ -#define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL -#define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL -#define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL -#define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL -#define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL -#define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL -#define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL - u64 mic_fir_debug; /* 0x0238 */ - - u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */ -}; - -extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); -extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); - -/* some utility functions to deal with SMT */ -extern u32 cbe_get_hw_thread_id(int cpu); -extern u32 cbe_cpu_to_node(int cpu); -extern u32 cbe_node_to_cpu(int node); - -/* Init this module early */ -extern void cbe_regs_init(void); - - -#endif /* CBE_REGS_H */ |