aboutsummaryrefslogtreecommitdiff
path: root/include/asm-powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-powerpc')
-rw-r--r--include/asm-powerpc/prom.h2
-rw-r--r--include/asm-powerpc/smu.h153
2 files changed, 144 insertions, 11 deletions
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 7587bf5f38c..f999df1c5c9 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -203,7 +203,7 @@ extern int prom_n_addr_cells(struct device_node* np);
extern int prom_n_size_cells(struct device_node* np);
extern int prom_n_intr_cells(struct device_node* np);
extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern void prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_add_property(struct device_node* np, struct property* prop);
#ifdef CONFIG_PPC32
/*
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
index 959bad66023..76c29a9784d 100644
--- a/include/asm-powerpc/smu.h
+++ b/include/asm-powerpc/smu.h
@@ -20,16 +20,52 @@
/*
* Partition info commands
*
- * I do not know what those are for at this point
+ * These commands are used to retreive the sdb-partition-XX datas from
+ * the SMU. The lenght is always 2. First byte is the subcommand code
+ * and second byte is the partition ID.
+ *
+ * The reply is 6 bytes:
+ *
+ * - 0..1 : partition address
+ * - 2 : a byte containing the partition ID
+ * - 3 : length (maybe other bits are rest of header ?)
+ *
+ * The data must then be obtained with calls to another command:
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below).
*/
#define SMU_CMD_PARTITION_COMMAND 0x3e
+#define SMU_CMD_PARTITION_LATEST 0x01
+#define SMU_CMD_PARTITION_BASE 0x02
+#define SMU_CMD_PARTITION_UPDATE 0x03
/*
* Fan control
*
- * This is a "mux" for fan control commands, first byte is the
- * "sub" command.
+ * This is a "mux" for fan control commands. The command seem to
+ * act differently based on the number of arguments. With 1 byte
+ * of argument, this seem to be queries for fans status, setpoint,
+ * etc..., while with 0xe arguments, we will set the fans speeds.
+ *
+ * Queries (1 byte arg):
+ * ---------------------
+ *
+ * arg=0x01: read RPM fans status
+ * arg=0x02: read RPM fans setpoint
+ * arg=0x11: read PWM fans status
+ * arg=0x12: read PWM fans setpoint
+ *
+ * the "status" queries return the current speed while the "setpoint" ones
+ * return the programmed/target speed. It _seems_ that the result is a bit
+ * mask in the first byte of active/available fans, followed by 6 words (16
+ * bits) containing the requested speed.
+ *
+ * Setpoint (14 bytes arg):
+ * ------------------------
+ *
+ * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the
+ * mask of fans affected by the command. Followed by 6 words containing the
+ * setpoint value for selected fans in the mask (or 0 if mask value is 0)
*/
#define SMU_CMD_FAN_COMMAND 0x4a
@@ -156,6 +192,14 @@
#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN"
#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW"
+/*
+ * Read ADC sensors
+ *
+ * This command takes one byte of parameter: the sensor ID (or "reg"
+ * value in the device-tree) and returns a 16 bits value
+ */
+#define SMU_CMD_READ_ADC 0xd8
+
/* Misc commands
*
* This command seem to be a grab bag of various things
@@ -176,6 +220,25 @@
* Misc commands
*
* This command seem to be a grab bag of various things
+ *
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
+ * transfer blocks of data from the SMU. So far, I've decrypted it's
+ * usage to retreive partition data. In order to do that, you have to
+ * break your transfer in "chunks" since that command cannot transfer
+ * more than a chunk at a time. The chunk size used by OF is 0xe bytes,
+ * but it seems that the darwin driver will let you do 0x1e bytes if
+ * your "PMU" version is >= 0x30. You can get the "PMU" version apparently
+ * either in the last 16 bits of property "smu-version-pmu" or as the 16
+ * bytes at offset 1 of "smu-version-info"
+ *
+ * For each chunk, the command takes 7 bytes of arguments:
+ * byte 0: subcommand code (0x02)
+ * byte 1: 0x04 (always, I don't know what it means, maybe the address
+ * space to use or some other nicety. It's hard coded in OF)
+ * byte 2..5: SMU address of the chunk (big endian 32 bits)
+ * byte 6: size to transfer (up to max chunk size)
+ *
+ * The data is returned directly
*/
#define SMU_CMD_MISC_ee_COMMAND 0xee
#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02
@@ -353,21 +416,26 @@ struct smu_sdbp_header {
__u8 flags;
};
-/*
- * 32 bits integers are usually encoded with 2x16 bits swapped,
- * this demangles them
+
+ /*
+ * demangle 16 and 32 bits integer in some SMU partitions
+ * (currently, afaik, this concerns only the FVT partition
+ * (0x12)
*/
-#define SMU_U32_MIX(x) ((((x) << 16) & 0xffff0000u) | (((x) >> 16) & 0xffffu))
+#define SMU_U16_MIX(x) le16_to_cpu(x);
+#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8))
+
/* This is the definition of the SMU sdb-partition-0x12 table (called
* CPU F/V/T operating points in Darwin). The definition for all those
* SMU tables should be moved to some separate file
*/
-#define SMU_SDB_FVT_ID 0x12
+#define SMU_SDB_FVT_ID 0x12
struct smu_sdbp_fvt {
__u32 sysclk; /* Base SysClk frequency in Hz for
- * this operating point
+ * this operating point. Value need to
+ * be unmixed with SMU_U32_MIX()
*/
__u8 pad;
__u8 maxtemp; /* Max temp. supported by this
@@ -376,10 +444,73 @@ struct smu_sdbp_fvt {
__u16 volts[3]; /* CPU core voltage for the 3
* PowerTune modes, a mode with
- * 0V = not supported.
+ * 0V = not supported. Value need
+ * to be unmixed with SMU_U16_MIX()
*/
};
+/* This partition contains voltage & current sensor calibration
+ * informations
+ */
+#define SMU_SDB_CPUVCP_ID 0x21
+
+struct smu_sdbp_cpuvcp {
+ __u16 volt_scale; /* u4.12 fixed point */
+ __s16 volt_offset; /* s4.12 fixed point */
+ __u16 curr_scale; /* u4.12 fixed point */
+ __s16 curr_offset; /* s4.12 fixed point */
+ __s32 power_quads[3]; /* s4.28 fixed point */
+};
+
+/* This partition contains CPU thermal diode calibration
+ */
+#define SMU_SDB_CPUDIODE_ID 0x18
+
+struct smu_sdbp_cpudiode {
+ __u16 m_value; /* u1.15 fixed point */
+ __s16 b_value; /* s10.6 fixed point */
+
+};
+
+/* This partition contains Slots power calibration
+ */
+#define SMU_SDB_SLOTSPOW_ID 0x78
+
+struct smu_sdbp_slotspow {
+ __u16 pow_scale; /* u4.12 fixed point */
+ __s16 pow_offset; /* s4.12 fixed point */
+};
+
+/* This partition contains machine specific version information about
+ * the sensor/control layout
+ */
+#define SMU_SDB_SENSORTREE_ID 0x25
+
+struct smu_sdbp_sensortree {
+ u8 model_id;
+ u8 unknown[3];
+};
+
+/* This partition contains CPU thermal control PID informations. So far
+ * only single CPU machines have been seen with an SMU, so we assume this
+ * carries only informations for those
+ */
+#define SMU_SDB_CPUPIDDATA_ID 0x17
+
+struct smu_sdbp_cpupiddata {
+ u8 unknown1;
+ u8 target_temp_delta;
+ u8 unknown2;
+ u8 history_len;
+ s16 power_adj;
+ u16 max_power;
+ s32 gp,gr,gd;
+};
+
+
+/* Other partitions without known structures */
+#define SMU_SDB_DEBUG_SWITCHES_ID 0x05
+
#ifdef __KERNEL__
/*
* This returns the pointer to an SMU "sdb" partition data or NULL
@@ -423,8 +554,10 @@ struct smu_user_cmd_hdr
__u32 cmdtype;
#define SMU_CMDTYPE_SMU 0 /* SMU command */
#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */
+#define SMU_CMDTYPE_GET_PARTITION 2 /* retreive an sdb partition */
__u8 cmd; /* SMU command byte */
+ __u8 pad[3]; /* padding */
__u32 data_len; /* Lenght of data following */
};