aboutsummaryrefslogtreecommitdiff
path: root/include/linux/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/regulator')
-rw-r--r--include/linux/regulator/consumer.h4
-rw-r--r--include/linux/regulator/driver.h7
-rw-r--r--include/linux/regulator/fixed.h24
-rw-r--r--include/linux/regulator/machine.h26
-rw-r--r--include/linux/regulator/max1586.h4
5 files changed, 58 insertions, 7 deletions
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 277f4b964df..490c5b37b6d 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -125,6 +125,8 @@ struct regulator_bulk_data {
/* regulator get and put */
struct regulator *__must_check regulator_get(struct device *dev,
const char *id);
+struct regulator *__must_check regulator_get_exclusive(struct device *dev,
+ const char *id);
void regulator_put(struct regulator *regulator);
/* regulator output control and status */
@@ -144,6 +146,8 @@ void regulator_bulk_free(int num_consumers,
int regulator_count_voltages(struct regulator *regulator);
int regulator_list_voltage(struct regulator *regulator, unsigned selector);
+int regulator_is_supported_voltage(struct regulator *regulator,
+ int min_uV, int max_uV);
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
int regulator_get_voltage(struct regulator *regulator);
int regulator_set_current_limit(struct regulator *regulator,
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 225f733e753..31f2055eae2 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -37,7 +37,8 @@ enum regulator_status {
*
* @enable: Configure the regulator as enabled.
* @disable: Configure the regulator as disabled.
- * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 if not.
+ * May also return negative errno.
*
* @set_voltage: Set the voltage for the regulator within the range specified.
* The driver should select the voltage closest to min_uV.
@@ -162,6 +163,8 @@ struct regulator_desc {
struct regulator_dev {
struct regulator_desc *desc;
int use_count;
+ int open_count;
+ int exclusive;
/* lists we belong to */
struct list_head list; /* list of all regulators */
@@ -193,6 +196,8 @@ void *rdev_get_drvdata(struct regulator_dev *rdev);
struct device *rdev_get_dev(struct regulator_dev *rdev);
int rdev_get_id(struct regulator_dev *rdev);
+int regulator_mode_to_status(unsigned int);
+
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
#endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 91b4da31f1b..e94a4a1c7c8 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -5,6 +5,9 @@
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
@@ -16,9 +19,30 @@
struct regulator_init_data;
+/**
+ * struct fixed_voltage_config - fixed_voltage_config structure
+ * @supply_name: Name of the regulator supply
+ * @microvolts: Output voltage of regulator
+ * @gpio: GPIO to use for enable control
+ * set to -EINVAL if not used
+ * @enable_high: Polarity of enable GPIO
+ * 1 = Active high, 0 = Active low
+ * @enabled_at_boot: Whether regulator has been enabled at
+ * boot or not. 1 = Yes, 0 = No
+ * This is used to keep the regulator at
+ * the default state
+ * @init_data: regulator_init_data
+ *
+ * This structure contains fixed voltage regulator configuration
+ * information that must be passed by platform code to the fixed
+ * voltage regulator driver.
+ */
struct fixed_voltage_config {
const char *supply_name;
int microvolts;
+ int gpio;
+ unsigned enable_high:1;
+ unsigned enabled_at_boot:1;
struct regulator_init_data *init_data;
};
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index bac64fa390f..87f5f176d4e 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -41,7 +41,7 @@ struct regulator;
#define REGULATOR_CHANGE_DRMS 0x10
/**
- * struct regulator_state - regulator state during low power syatem states
+ * struct regulator_state - regulator state during low power system states
*
* This describes a regulators state during a system wide low power state.
*
@@ -117,25 +117,37 @@ struct regulation_constraints {
/* mode to set on startup */
unsigned int initial_mode;
- /* constriant flags */
+ /* constraint flags */
unsigned always_on:1; /* regulator never off when system is on */
unsigned boot_on:1; /* bootloader/firmware enabled regulator */
- unsigned apply_uV:1; /* apply uV constraint iff min == max */
+ unsigned apply_uV:1; /* apply uV constraint if min == max */
};
/**
* struct regulator_consumer_supply - supply -> device mapping
*
- * This maps a supply name to a device.
+ * This maps a supply name to a device. Only one of dev or dev_name
+ * can be specified. Use of dev_name allows support for buses which
+ * make struct device available late such as I2C and is the preferred
+ * form.
*
* @dev: Device structure for the consumer.
+ * @dev_name: Result of dev_name() for the consumer.
* @supply: Name for the supply.
*/
struct regulator_consumer_supply {
struct device *dev; /* consumer */
+ const char *dev_name; /* dev_name() for consumer */
const char *supply; /* consumer supply - e.g. "vcc" */
};
+/* Initialize struct regulator_consumer_supply */
+#define REGULATOR_SUPPLY(_name, _dev_name) \
+{ \
+ .supply = _name, \
+ .dev_name = _dev_name, \
+}
+
/**
* struct regulator_init_data - regulator platform initialisation data.
*
@@ -166,6 +178,12 @@ struct regulator_init_data {
int regulator_suspend_prepare(suspend_state_t state);
+#ifdef CONFIG_REGULATOR
void regulator_has_full_constraints(void);
+#else
+static inline void regulator_has_full_constraints(void)
+{
+}
+#endif
#endif
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
index 44563192bf1..de9a7fae20b 100644
--- a/include/linux/regulator/max1586.h
+++ b/include/linux/regulator/max1586.h
@@ -36,7 +36,7 @@
* max1586_subdev_data - regulator data
* @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
* @name: regulator cute name (example for V3: "vcc_core")
- * @platform_data: regulator init data (contraints, supplies, ...)
+ * @platform_data: regulator init data (constraints, supplies, ...)
*/
struct max1586_subdev_data {
int id;
@@ -46,7 +46,7 @@ struct max1586_subdev_data {
/**
* max1586_platform_data - platform data for max1586
- * @num_subdevs: number of regultors used (may be 1 or 2)
+ * @num_subdevs: number of regulators used (may be 1 or 2)
* @subdevs: regulator used
* At most, there will be a regulator for V3 and one for V6 voltages.
* @v3_gain: gain on the V3 voltage output multiplied by 1e6.