diff options
Diffstat (limited to 'include/linux/spi')
| -rw-r--r-- | include/linux/spi/ds1305.h | 35 | ||||
| -rw-r--r-- | include/linux/spi/max7301.h | 9 | ||||
| -rw-r--r-- | include/linux/spi/mmc_spi.h | 9 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 4 |
4 files changed, 55 insertions, 2 deletions
diff --git a/include/linux/spi/ds1305.h b/include/linux/spi/ds1305.h new file mode 100644 index 00000000000..287ec830eab --- /dev/null +++ b/include/linux/spi/ds1305.h @@ -0,0 +1,35 @@ +#ifndef __LINUX_SPI_DS1305_H +#define __LINUX_SPI_DS1305_H + +/* + * One-time configuration for ds1305 and ds1306 RTC chips. + * + * Put a pointer to this in spi_board_info.platform_data if you want to + * be sure that Linux (re)initializes this as needed ... after losing + * backup power, and potentially on the first boot. + */ +struct ds1305_platform_data { + + /* Trickle charge configuration: it's OK to leave out the MAGIC + * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K. + */ +#define DS1305_TRICKLE_MAGIC 0xa0 +#define DS1305_TRICKLE_DS2 0x08 /* two diodes */ +#define DS1305_TRICKLE_DS1 0x04 /* one diode */ +#define DS1305_TRICKLE_2K 0x01 /* 2 KOhm resistance */ +#define DS1305_TRICKLE_4K 0x02 /* 4 KOhm resistance */ +#define DS1305_TRICKLE_8K 0x03 /* 8 KOhm resistance */ + u8 trickle; + + /* set only on ds1306 parts */ + bool is_ds1306; + + /* ds1306 only: enable 1 Hz output */ + bool en_1hz; + + /* REVISIT: the driver currently expects nINT0 to be wired + * as the alarm IRQ. ALM1 may also need to be set up ... + */ +}; + +#endif /* __LINUX_SPI_DS1305_H */ diff --git a/include/linux/spi/max7301.h b/include/linux/spi/max7301.h new file mode 100644 index 00000000000..6dfd83f19b4 --- /dev/null +++ b/include/linux/spi/max7301.h @@ -0,0 +1,9 @@ +#ifndef LINUX_SPI_MAX7301_H +#define LINUX_SPI_MAX7301_H + +struct max7301_platform_data { + /* number assigned to the first GPIO */ + unsigned base; +}; + +#endif diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h index d5ca78b93a3..a3626aedaec 100644 --- a/include/linux/spi/mmc_spi.h +++ b/include/linux/spi/mmc_spi.h @@ -23,6 +23,15 @@ struct mmc_spi_platform_data { /* sense switch on sd cards */ int (*get_ro)(struct device *); + /* + * If board does not use CD interrupts, driver can optimize polling + * using this function. + */ + int (*get_cd)(struct device *); + + /* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */ + unsigned long caps; + /* how long to debounce card detect, in msecs */ u16 detect_delay; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 387e428f1cd..a9cc29d4665 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -82,7 +82,7 @@ struct spi_device { int irq; void *controller_state; void *controller_data; - const char *modalias; + char modalias[32]; /* * likely need more hooks for more protocol options affecting how @@ -733,7 +733,7 @@ struct spi_board_info { * controller_data goes to spi_device.controller_data, * irq is copied too */ - char modalias[KOBJ_NAME_LEN]; + char modalias[32]; const void *platform_data; void *controller_data; int irq; |