diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/clocksource.h | 122 | ||||
| -rw-r--r-- | include/linux/hrtimer.h | 2 | ||||
| -rw-r--r-- | include/linux/time.h | 10 | ||||
| -rw-r--r-- | include/linux/timer.h | 5 |
4 files changed, 19 insertions, 120 deletions
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 1219be4fb42..83d2fbd81b9 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -14,6 +14,7 @@ #include <linux/list.h> #include <linux/cache.h> #include <linux/timer.h> +#include <linux/init.h> #include <asm/div64.h> #include <asm/io.h> @@ -148,14 +149,11 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @disable: optional function to disable the clocksource * @mask: bitmask for two's complement * subtraction of non 64 bit counters - * @mult: cycle to nanosecond multiplier (adjusted by NTP) - * @mult_orig: cycle to nanosecond multiplier (unadjusted by NTP) + * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @flags: flags describing special properties * @vread: vsyscall based read * @resume: resume function for the clocksource, if necessary - * @cycle_interval: Used internally by timekeeping core, please ignore. - * @xtime_interval: Used internally by timekeeping core, please ignore. */ struct clocksource { /* @@ -169,7 +167,6 @@ struct clocksource { void (*disable)(struct clocksource *cs); cycle_t mask; u32 mult; - u32 mult_orig; u32 shift; unsigned long flags; cycle_t (*vread)(void); @@ -181,19 +178,12 @@ struct clocksource { #define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0) #endif - /* timekeeping specific data, ignore */ - cycle_t cycle_interval; - u64 xtime_interval; - u32 raw_interval; /* * Second part is written at each timer interrupt * Keep it in a different cache line to dirty no * more than one cache line. */ cycle_t cycle_last ____cacheline_aligned_in_smp; - u64 xtime_nsec; - s64 error; - struct timespec raw_time; #ifdef CONFIG_CLOCKSOURCE_WATCHDOG /* Watchdog related data, used by the framework */ @@ -202,8 +192,6 @@ struct clocksource { #endif }; -extern struct clocksource *clock; /* current clocksource */ - /* * Clock source flags bits:: */ @@ -212,6 +200,7 @@ extern struct clocksource *clock; /* current clocksource */ #define CLOCK_SOURCE_WATCHDOG 0x10 #define CLOCK_SOURCE_VALID_FOR_HRES 0x20 +#define CLOCK_SOURCE_UNSTABLE 0x40 /* simplify initialization of mask field */ #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1) @@ -268,108 +257,15 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) } /** - * clocksource_read: - Access the clocksource's current cycle value - * @cs: pointer to clocksource being read - * - * Uses the clocksource to return the current cycle_t value - */ -static inline cycle_t clocksource_read(struct clocksource *cs) -{ - return cs->read(cs); -} - -/** - * clocksource_enable: - enable clocksource - * @cs: pointer to clocksource - * - * Enables the specified clocksource. The clocksource callback - * function should start up the hardware and setup mult and field - * members of struct clocksource to reflect hardware capabilities. - */ -static inline int clocksource_enable(struct clocksource *cs) -{ - int ret = 0; - - if (cs->enable) - ret = cs->enable(cs); - - /* - * The frequency may have changed while the clocksource - * was disabled. If so the code in ->enable() must update - * the mult value to reflect the new frequency. Make sure - * mult_orig follows this change. - */ - cs->mult_orig = cs->mult; - - return ret; -} - -/** - * clocksource_disable: - disable clocksource - * @cs: pointer to clocksource - * - * Disables the specified clocksource. The clocksource callback - * function should power down the now unused hardware block to - * save power. - */ -static inline void clocksource_disable(struct clocksource *cs) -{ - /* - * Save mult_orig in mult so clocksource_enable() can - * restore the value regardless if ->enable() updates - * the value of mult or not. - */ - cs->mult = cs->mult_orig; - - if (cs->disable) - cs->disable(cs); -} - -/** - * cyc2ns - converts clocksource cycles to nanoseconds - * @cs: Pointer to clocksource - * @cycles: Cycles + * clocksource_cyc2ns - converts clocksource cycles to nanoseconds * - * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds. + * Converts cycles to nanoseconds, using the given mult and shift. * * XXX - This could use some mult_lxl_ll() asm optimization */ -static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles) -{ - u64 ret = (u64)cycles; - ret = (ret * cs->mult) >> cs->shift; - return ret; -} - -/** - * clocksource_calculate_interval - Calculates a clocksource interval struct - * - * @c: Pointer to clocksource. - * @length_nsec: Desired interval length in nanoseconds. - * - * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment - * pair and interval request. - * - * Unless you're the timekeeping code, you should not be using this! - */ -static inline void clocksource_calculate_interval(struct clocksource *c, - unsigned long length_nsec) +static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift) { - u64 tmp; - - /* Do the ns -> cycle conversion first, using original mult */ - tmp = length_nsec; - tmp <<= c->shift; - tmp += c->mult_orig/2; - do_div(tmp, c->mult_orig); - - c->cycle_interval = (cycle_t)tmp; - if (c->cycle_interval == 0) - c->cycle_interval = 1; - - /* Go back from cycles -> shifted ns, this time use ntp adjused mult */ - c->xtime_interval = (u64)c->cycle_interval * c->mult; - c->raw_interval = ((u64)c->cycle_interval * c->mult_orig) >> c->shift; + return ((u64) cycles * mult) >> shift; } @@ -380,6 +276,8 @@ extern void clocksource_touch_watchdog(void); extern struct clocksource* clocksource_get_next(void); extern void clocksource_change_rating(struct clocksource *cs, int rating); extern void clocksource_resume(void); +extern struct clocksource * __init __weak clocksource_default_clock(void); +extern void clocksource_mark_unstable(struct clocksource *cs); #ifdef CONFIG_GENERIC_TIME_VSYSCALL extern void update_vsyscall(struct timespec *ts, struct clocksource *c); @@ -394,4 +292,6 @@ static inline void update_vsyscall_tz(void) } #endif +extern void timekeeping_notify(struct clocksource *clock); + #endif /* _LINUX_CLOCKSOURCE_H */ diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 4759917adc7..ff037f0b1b4 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -91,7 +91,6 @@ enum hrtimer_restart { * @function: timer expiry callback function * @base: pointer to the timer base (per cpu and per clock) * @state: state information (See bit values above) - * @cb_entry: list head to enqueue an expired timer into the callback list * @start_site: timer statistics field to store the site where the timer * was started * @start_comm: timer statistics field to store the name of the process which @@ -108,7 +107,6 @@ struct hrtimer { enum hrtimer_restart (*function)(struct hrtimer *); struct hrtimer_clock_base *base; unsigned long state; - struct list_head cb_entry; #ifdef CONFIG_TIMER_STATS int start_pid; void *start_site; diff --git a/include/linux/time.h b/include/linux/time.h index ea16c1a01d5..56787c09334 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -75,7 +75,7 @@ extern unsigned long mktime(const unsigned int year, const unsigned int mon, const unsigned int day, const unsigned int hour, const unsigned int min, const unsigned int sec); -extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec); +extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec); extern struct timespec timespec_add_safe(const struct timespec lhs, const struct timespec rhs); @@ -101,7 +101,8 @@ extern struct timespec xtime; extern struct timespec wall_to_monotonic; extern seqlock_t xtime_lock; -extern unsigned long read_persistent_clock(void); +extern void read_persistent_clock(struct timespec *ts); +extern void read_boot_clock(struct timespec *ts); extern int update_persistent_clock(struct timespec now); extern int no_sync_cmos_clock __read_mostly; void timekeeping_init(void); @@ -109,6 +110,8 @@ extern int timekeeping_suspended; unsigned long get_seconds(void); struct timespec current_kernel_time(void); +struct timespec __current_kernel_time(void); /* does not hold xtime_lock */ +struct timespec get_monotonic_coarse(void); #define CURRENT_TIME (current_kernel_time()) #define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 }) @@ -147,6 +150,7 @@ extern struct timespec timespec_trunc(struct timespec t, unsigned gran); extern int timekeeping_valid_for_hres(void); extern void update_wall_time(void); extern void update_xtime_cache(u64 nsec); +extern void timekeeping_leap_insert(int leapsecond); struct tms; extern void do_sys_times(struct tms *); @@ -241,6 +245,8 @@ struct itimerval { #define CLOCK_PROCESS_CPUTIME_ID 2 #define CLOCK_THREAD_CPUTIME_ID 3 #define CLOCK_MONOTONIC_RAW 4 +#define CLOCK_REALTIME_COARSE 5 +#define CLOCK_MONOTONIC_COARSE 6 /* * The IDs of various hardware clocks: diff --git a/include/linux/timer.h b/include/linux/timer.h index be62ec2ebea..a2d1eb6cb3f 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -175,11 +175,6 @@ extern int mod_timer_pinned(struct timer_list *timer, unsigned long expires); /* * Return when the next timer-wheel timeout occurs (in absolute jiffies), - * locks the timer base: - */ -extern unsigned long next_timer_interrupt(void); -/* - * Return when the next timer-wheel timeout occurs (in absolute jiffies), * locks the timer base and does the comparison against the given * jiffie. */ |