aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/usb.h12
-rw-r--r--include/linux/usb/composite.h338
-rw-r--r--include/linux/usb/gadget.h27
-rw-r--r--include/linux/usb/irda.h151
-rw-r--r--include/linux/usbdevice_fs.h2
5 files changed, 521 insertions, 9 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c08689ea9b4..5811c5da69f 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -160,6 +160,7 @@ struct usb_interface {
unsigned is_active:1; /* the interface is not suspended */
unsigned sysfs_files_created:1; /* the sysfs attributes exist */
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
+ unsigned needs_binding:1; /* needs delayed unbind/rebind */
struct device dev; /* interface specific device info */
struct device *usb_dev;
@@ -293,7 +294,7 @@ struct usb_devmap {
struct usb_bus {
struct device *controller; /* host/master side hardware */
int busnum; /* Bus number (in order of reg) */
- char *bus_name; /* stable id (PCI slot_name etc) */
+ const char *bus_name; /* stable id (PCI slot_name etc) */
u8 uses_dma; /* Does the host controller use DMA? */
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
@@ -497,8 +498,6 @@ extern int usb_lock_device_for_reset(struct usb_device *udev,
/* USB port reset for device reinitialization */
extern int usb_reset_device(struct usb_device *dev);
-extern int usb_reset_composite_device(struct usb_device *dev,
- struct usb_interface *iface);
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
@@ -958,9 +957,9 @@ struct usbdrv_wrap {
* @resume: Called when the device is being resumed by the system.
* @reset_resume: Called when the suspended device has been reset instead
* of being resumed.
- * @pre_reset: Called by usb_reset_composite_device() when the device
+ * @pre_reset: Called by usb_reset_device() when the device
* is about to be reset.
- * @post_reset: Called by usb_reset_composite_device() after the device
+ * @post_reset: Called by usb_reset_device() after the device
* has been reset
* @id_table: USB drivers use ID table to support hotplugging.
* Export this with MODULE_DEVICE_TABLE(usb,...). This must be set
@@ -972,6 +971,8 @@ struct usbdrv_wrap {
* added to this driver by preventing the sysfs file from being created.
* @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
* for interfaces bound to this driver.
+ * @soft_unbind: if set to 1, the USB core will not kill URBs and disable
+ * endpoints before calling the driver's disconnect method.
*
* USB interface drivers must provide a name, probe() and disconnect()
* methods, and an id_table. Other driver fields are optional.
@@ -1012,6 +1013,7 @@ struct usb_driver {
struct usbdrv_wrap drvwrap;
unsigned int no_dynamic_id:1;
unsigned int supports_autosuspend:1;
+ unsigned int soft_unbind:1;
};
#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
new file mode 100644
index 00000000000..747c3a49cdc
--- /dev/null
+++ b/include/linux/usb/composite.h
@@ -0,0 +1,338 @@
+/*
+ * composite.h -- framework for usb gadgets which are composite devices
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __LINUX_USB_COMPOSITE_H
+#define __LINUX_USB_COMPOSITE_H
+
+/*
+ * This framework is an optional layer on top of the USB Gadget interface,
+ * making it easier to build (a) Composite devices, supporting multiple
+ * functions within any single configuration, and (b) Multi-configuration
+ * devices, also supporting multiple functions but without necessarily
+ * having more than one function per configuration.
+ *
+ * Example: a device with a single configuration supporting both network
+ * link and mass storage functions is a composite device. Those functions
+ * might alternatively be packaged in individual configurations, but in
+ * the composite model the host can use both functions at the same time.
+ */
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+
+struct usb_configuration;
+
+/**
+ * struct usb_function - describes one function of a configuration
+ * @name: For diagnostics, identifies the function.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ * and by language IDs provided in control requests
+ * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this pointer is null,
+ * the function will not be available at full speed (or at low speed).
+ * @hs_descriptors: Table of high speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this pointer is null,
+ * the function will not be available at high speed.
+ * @config: assigned when @usb_add_function() is called; this is the
+ * configuration with which this function is associated.
+ * @bind: Before the gadget can register, all of its functions bind() to the
+ * available resources including string and interface identifiers used
+ * in interface or class descriptors; endpoints; I/O buffers; and so on.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ * driver which added this function.
+ * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
+ * initialize usb_ep.driver data at this time (when it is used).
+ * Note that setting an interface to its current altsetting resets
+ * interface state, and that all interfaces have a disabled state.
+ * @get_alt: Returns the active altsetting. If this is not provided,
+ * then only altsetting zero is supported.
+ * @disable: (REQUIRED) Indicates the function should be disabled. Reasons
+ * include host resetting or reconfiguring the gadget, and disconnection.
+ * @setup: Used for interface-specific control requests.
+ * @suspend: Notifies functions when the host stops sending USB traffic.
+ * @resume: Notifies functions when the host restarts USB traffic.
+ *
+ * A single USB function uses one or more interfaces, and should in most
+ * cases support operation at both full and high speeds. Each function is
+ * associated by @usb_add_function() with a one configuration; that function
+ * causes @bind() to be called so resources can be allocated as part of
+ * setting up a gadget driver. Those resources include endpoints, which
+ * should be allocated using @usb_ep_autoconfig().
+ *
+ * To support dual speed operation, a function driver provides descriptors
+ * for both high and full speed operation. Except in rare cases that don't
+ * involve bulk endpoints, each speed needs different endpoint descriptors.
+ *
+ * Function drivers choose their own strategies for managing instance data.
+ * The simplest strategy just declares it "static', which means the function
+ * can only be activated once. If the function needs to be exposed in more
+ * than one configuration at a given speed, it needs to support multiple
+ * usb_function structures (one for each configuration).
+ *
+ * A more complex strategy might encapsulate a @usb_function structure inside
+ * a driver-specific instance structure to allows multiple activations. An
+ * example of multiple activations might be a CDC ACM function that supports
+ * two or more distinct instances within the same configuration, providing
+ * several independent logical data links to a USB host.
+ */
+struct usb_function {
+ const char *name;
+ struct usb_gadget_strings **strings;
+ struct usb_descriptor_header **descriptors;
+ struct usb_descriptor_header **hs_descriptors;
+
+ struct usb_configuration *config;
+
+ /* REVISIT: bind() functions can be marked __init, which
+ * makes trouble for section mismatch analysis. See if
+ * we can't restructure things to avoid mismatching.
+ * Related: unbind() may kfree() but bind() won't...
+ */
+
+ /* configuration management: bind/unbind */
+ int (*bind)(struct usb_configuration *,
+ struct usb_function *);
+ void (*unbind)(struct usb_configuration *,
+ struct usb_function *);
+
+ /* runtime state management */
+ int (*set_alt)(struct usb_function *,
+ unsigned interface, unsigned alt);
+ int (*get_alt)(struct usb_function *,
+ unsigned interface);
+ void (*disable)(struct usb_function *);
+ int (*setup)(struct usb_function *,
+ const struct usb_ctrlrequest *);
+ void (*suspend)(struct usb_function *);
+ void (*resume)(struct usb_function *);
+
+ /* internals */
+ struct list_head list;
+};
+
+int usb_add_function(struct usb_configuration *, struct usb_function *);
+
+int usb_interface_id(struct usb_configuration *, struct usb_function *);
+
+/**
+ * ep_choose - select descriptor endpoint at current device speed
+ * @g: gadget, connected and running at some speed
+ * @hs: descriptor to use for high speed operation
+ * @fs: descriptor to use for full or low speed operation
+ */
+static inline struct usb_endpoint_descriptor *
+ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+ struct usb_endpoint_descriptor *fs)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
+}
+
+#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */
+
+/**
+ * struct usb_configuration - represents one gadget configuration
+ * @label: For diagnostics, describes the configuration.
+ * @strings: Tables of strings, keyed by identifiers assigned during @bind()
+ * and by language IDs provided in control requests.
+ * @descriptors: Table of descriptors preceding all function descriptors.
+ * Examples include OTG and vendor-specific descriptors.
+ * @bind: Called from @usb_add_config() to allocate resources unique to this
+ * configuration and to call @usb_add_function() for each function used.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ * driver which added this configuration.
+ * @setup: Used to delegate control requests that aren't handled by standard
+ * device infrastructure or directed at a specific interface.
+ * @bConfigurationValue: Copied into configuration descriptor.
+ * @iConfiguration: Copied into configuration descriptor.
+ * @bmAttributes: Copied into configuration descriptor.
+ * @bMaxPower: Copied into configuration descriptor.
+ * @cdev: assigned by @usb_add_config() before calling @bind(); this is
+ * the device associated with this configuration.
+ *
+ * Configurations are building blocks for gadget drivers structured around
+ * function drivers. Simple USB gadgets require only one function and one
+ * configuration, and handle dual-speed hardware by always providing the same
+ * functionality. Slightly more complex gadgets may have more than one
+ * single-function configuration at a given speed; or have configurations
+ * that only work at one speed.
+ *
+ * Composite devices are, by definition, ones with configurations which
+ * include more than one function.
+ *
+ * The lifecycle of a usb_configuration includes allocation, initialization
+ * of the fields described above, and calling @usb_add_config() to set up
+ * internal data and bind it to a specific device. The configuration's
+ * @bind() method is then used to initialize all the functions and then
+ * call @usb_add_function() for them.
+ *
+ * Those functions would normally be independant of each other, but that's
+ * not mandatory. CDC WMC devices are an example where functions often
+ * depend on other functions, with some functions subsidiary to others.
+ * Such interdependency may be managed in any way, so long as all of the
+ * descriptors complete by the time the composite driver returns from
+ * its bind() routine.
+ */
+struct usb_configuration {
+ const char *label;
+ struct usb_gadget_strings **strings;
+ const struct usb_descriptor_header **descriptors;
+
+ /* REVISIT: bind() functions can be marked __init, which
+ * makes trouble for section mismatch analysis. See if
+ * we can't restructure things to avoid mismatching...
+ */
+
+ /* configuration management: bind/unbind */
+ int (*bind)(struct usb_configuration *);
+ void (*unbind)(struct usb_configuration *);
+ int (*setup)(struct usb_configuration *,
+ const struct usb_ctrlrequest *);
+
+ /* fields in the config descriptor */
+ u8 bConfigurationValue;
+ u8 iConfiguration;
+ u8 bmAttributes;
+ u8 bMaxPower;
+
+ struct usb_composite_dev *cdev;
+
+ /* internals */
+ struct list_head list;
+ struct list_head functions;
+ u8 next_interface_id;
+ unsigned highspeed:1;
+ unsigned fullspeed:1;
+ struct usb_function *interface[MAX_CONFIG_INTERFACES];
+};
+
+int usb_add_config(struct usb_composite_dev *,
+ struct usb_configuration *);
+
+/**
+ * struct usb_composite_driver - groups configurations into a gadget
+ * @name: For diagnostics, identifies the driver.
+ * @dev: Template descriptor for the device, including default device
+ * identifiers.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ * and language IDs provided in control requests
+ * @bind: (REQUIRED) Used to allocate resources that are shared across the
+ * whole device, such as string IDs, and add its configurations using
+ * @usb_add_config(). This may fail by returning a negative errno
+ * value; it should return zero on successful initialization.
+ * @unbind: Reverses @bind(); called as a side effect of unregistering
+ * this driver.
+ *
+ * Devices default to reporting self powered operation. Devices which rely
+ * on bus powered operation should report this in their @bind() method.
+ *
+ * Before returning from @bind, various fields in the template descriptor
+ * may be overridden. These include the idVendor/idProduct/bcdDevice values
+ * normally to bind the appropriate host side driver, and the three strings
+ * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
+ * meaningful device identifiers. (The strings will not be defined unless
+ * they are defined in @dev and @strings.) The correct ep0 maxpacket size
+ * is also reported, as defined by the underlying controller driver.
+ */
+struct usb_composite_driver {
+ const char *name;
+ const struct usb_device_descriptor *dev;
+ struct usb_gadget_strings **strings;
+
+ /* REVISIT: bind() functions can be marked __init, which
+ * makes trouble for section mismatch analysis. See if
+ * we can't restructure things to avoid mismatching...
+ */
+
+ int (*bind)(struct usb_composite_dev *);
+ int (*unbind)(struct usb_composite_dev *);
+};
+
+extern int usb_composite_register(struct usb_composite_driver *);
+extern void usb_composite_unregister(struct usb_composite_driver *);
+
+
+/**
+ * struct usb_composite_device - represents one composite usb gadget
+ * @gadget: read-only, abstracts the gadget's usb peripheral controller
+ * @req: used for control responses; buffer is pre-allocated
+ * @bufsiz: size of buffer pre-allocated in @req
+ * @config: the currently active configuration
+ *
+ * One of these devices is allocated and initialized before the
+ * associated device driver's bind() is called.
+ *
+ * OPEN ISSUE: it appears that some WUSB devices will need to be
+ * built by combining a normal (wired) gadget with a wireless one.
+ * This revision of the gadget framework should probably try to make
+ * sure doing that won't hurt too much.
+ *
+ * One notion for how to handle Wireless USB devices involves:
+ * (a) a second gadget here, discovery mechanism TBD, but likely
+ * needing separate "register/unregister WUSB gadget" calls;
+ * (b) updates to usb_gadget to include flags "is it wireless",
+ * "is it wired", plus (presumably in a wrapper structure)
+ * bandgroup and PHY info;
+ * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
+ * wireless-specific parameters like maxburst and maxsequence;
+ * (d) configurations that are specific to wireless links;
+ * (e) function drivers that understand wireless configs and will
+ * support wireless for (additional) function instances;
+ * (f) a function to support association setup (like CBAF), not
+ * necessarily requiring a wireless adapter;
+ * (g) composite device setup that can create one or more wireless
+ * configs, including appropriate association setup support;
+ * (h) more, TBD.
+ */
+struct usb_composite_dev {
+ struct usb_gadget *gadget;
+ struct usb_request *req;
+ unsigned bufsiz;
+
+ struct usb_configuration *config;
+
+ /* internals */
+ struct usb_device_descriptor desc;
+ struct list_head configs;
+ struct usb_composite_driver *driver;
+ u8 next_string_id;
+
+ spinlock_t lock;
+
+ /* REVISIT use and existence of lock ... */
+};
+
+extern int usb_string_id(struct usb_composite_dev *c);
+
+/* messaging utils */
+#define DBG(d, fmt, args...) \
+ dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+ dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+ dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARN(d, fmt, args...) \
+ dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+ dev_info(&(d)->gadget->dev , fmt , ## args)
+
+#endif /* __LINUX_USB_COMPOSITE_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index cf468fbdbf8..0460a746480 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -33,7 +33,8 @@ struct usb_ep;
* @short_not_ok: When reading data, makes short packets be
* treated as errors (queue stops advancing till cleanup).
* @complete: Function called when request completes, so this request and
- * its buffer may be re-used.
+ * its buffer may be re-used. The function will always be called with
+ * interrupts disabled, and it must not sleep.
* Reads terminate with a short packet, or when the buffer fills,
* whichever comes first. When writes terminate, some data bytes
* will usually still be in flight (often in a hardware fifo).
@@ -271,7 +272,10 @@ static inline void usb_ep_free_request(struct usb_ep *ep,
* (Note that some USB device controllers disallow protocol stall responses
* in some cases.) When control responses are deferred (the response is
* written after the setup callback returns), then usb_ep_set_halt() may be
- * used on ep0 to trigger protocol stalls.
+ * used on ep0 to trigger protocol stalls. Depending on the controller,
+ * it may not be possible to trigger a status-stage protocol stall when the
+ * data stage is over, that is, from within the response's completion
+ * routine.
*
* For periodic endpoints, like interrupt or isochronous ones, the usb host
* arranges to poll once per interval, and the gadget driver usually will
@@ -858,6 +862,25 @@ int usb_descriptor_fillbuf(void *, unsigned,
int usb_gadget_config_buf(const struct usb_config_descriptor *config,
void *buf, unsigned buflen, const struct usb_descriptor_header **desc);
+/* copy a NULL-terminated vector of descriptors */
+struct usb_descriptor_header **usb_copy_descriptors(
+ struct usb_descriptor_header **);
+
+/* return copy of endpoint descriptor given original descriptor set */
+struct usb_endpoint_descriptor *usb_find_endpoint(
+ struct usb_descriptor_header **src,
+ struct usb_descriptor_header **copy,
+ struct usb_endpoint_descriptor *match);
+
+/**
+ * usb_free_descriptors - free descriptors returned by usb_copy_descriptors()
+ * @v: vector of descriptors
+ */
+static inline void usb_free_descriptors(struct usb_descriptor_header **v)
+{
+ kfree(v);
+}
+
/*-------------------------------------------------------------------------*/
/* utility wrapping a simple endpoint selection policy */
diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h
new file mode 100644
index 00000000000..e345ceaf72d
--- /dev/null
+++ b/include/linux/usb/irda.h
@@ -0,0 +1,151 @@
+/*
+ * USB IrDA Bridge Device Definition
+ */
+
+#ifndef __LINUX_USB_IRDA_H
+#define __LINUX_USB_IRDA_H
+
+/* This device should use Application-specific class */
+
+#define USB_SUBCLASS_IRDA 0x02
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific requests (bRequest field) */
+
+#define USB_REQ_CS_IRDA_RECEIVING 1
+#define USB_REQ_CS_IRDA_CHECK_MEDIA_BUSY 3
+#define USB_REQ_CS_IRDA_RATE_SNIFF 4
+#define USB_REQ_CS_IRDA_UNICAST_LIST 5
+#define USB_REQ_CS_IRDA_GET_CLASS_DESC 6
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific descriptor */
+
+#define USB_DT_CS_IRDA 0x21
+
+/*-------------------------------------------------------------------------*/
+
+/* Data sizes */
+
+#define USB_IRDA_DS_2048 (1 << 5)
+#define USB_IRDA_DS_1024 (1 << 4)
+#define USB_IRDA_DS_512 (1 << 3)
+#define USB_IRDA_DS_256 (1 << 2)
+#define USB_IRDA_DS_128 (1 << 1)
+#define USB_IRDA_DS_64 (1 << 0)
+
+/* Window sizes */
+
+#define USB_IRDA_WS_7 (1 << 6)
+#define USB_IRDA_WS_6 (1 << 5)
+#define USB_IRDA_WS_5 (1 << 4)
+#define USB_IRDA_WS_4 (1 << 3)
+#define USB_IRDA_WS_3 (1 << 2)
+#define USB_IRDA_WS_2 (1 << 1)
+#define USB_IRDA_WS_1 (1 << 0)
+
+/* Min turnaround times in usecs */
+
+#define USB_IRDA_MTT_0 (1 << 7)
+#define USB_IRDA_MTT_10 (1 << 6)
+#define USB_IRDA_MTT_50 (1 << 5)
+#define USB_IRDA_MTT_100 (1 << 4)
+#define USB_IRDA_MTT_500 (1 << 3)
+#define USB_IRDA_MTT_1000 (1 << 2)
+#define USB_IRDA_MTT_5000 (1 << 1)
+#define USB_IRDA_MTT_10000 (1 << 0)
+
+/* Baud rates */
+
+#define USB_IRDA_BR_4000000 (1 << 8)
+#define USB_IRDA_BR_1152000 (1 << 7)
+#define USB_IRDA_BR_576000 (1 << 6)
+#define USB_IRDA_BR_115200 (1 << 5)
+#define USB_IRDA_BR_57600 (1 << 4)
+#define USB_IRDA_BR_38400 (1 << 3)
+#define USB_IRDA_BR_19200 (1 << 2)
+#define USB_IRDA_BR_9600 (1 << 1)
+#define USB_IRDA_BR_2400 (1 << 0)
+
+/* Additional BOFs */
+
+#define USB_IRDA_AB_0 (1 << 7)
+#define USB_IRDA_AB_1 (1 << 6)
+#define USB_IRDA_AB_2 (1 << 5)
+#define USB_IRDA_AB_3 (1 << 4)
+#define USB_IRDA_AB_6 (1 << 3)
+#define USB_IRDA_AB_12 (1 << 2)
+#define USB_IRDA_AB_24 (1 << 1)
+#define USB_IRDA_AB_48 (1 << 0)
+
+/* IRDA Rate Sniff */
+
+#define USB_IRDA_RATE_SNIFF 1
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_irda_cs_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdSpecRevision;
+ __u8 bmDataSize;
+ __u8 bmWindowSize;
+ __u8 bmMinTurnaroundTime;
+ __le16 wBaudRate;
+ __u8 bmAdditionalBOFs;
+ __u8 bIrdaRateSniff;
+ __u8 bMaxUnicastList;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* Data Format */
+
+#define USB_IRDA_STATUS_MEDIA_BUSY (1 << 7)
+
+/* The following is a 4-bit value used for both
+ * inbound and outbound headers:
+ *
+ * 0 - speed ignored
+ * 1 - 2400 bps
+ * 2 - 9600 bps
+ * 3 - 19200 bps
+ * 4 - 38400 bps
+ * 5 - 57600 bps
+ * 6 - 115200 bps
+ * 7 - 576000 bps
+ * 8 - 1.152 Mbps
+ * 9 - 5 mbps
+ * 10..15 - Reserved
+ */
+#define USB_IRDA_STATUS_LINK_SPEED 0x0f
+
+/* The following is a 4-bit value used only for
+ * outbound header:
+ *
+ * 0 - No change (BOF ignored)
+ * 1 - 48 BOFs
+ * 2 - 24 BOFs
+ * 3 - 12 BOFs
+ * 4 - 6 BOFs
+ * 5 - 3 BOFs
+ * 6 - 2 BOFs
+ * 7 - 1 BOFs
+ * 8 - 0 BOFs
+ * 9..15 - Reserved
+ */
+#define USB_IRDA_EXTRA_BOFS 0xf0
+
+struct usb_irda_inbound_header {
+ __u8 bmStatus;
+};
+
+struct usb_irda_outbound_header {
+ __u8 bmChange;
+};
+
+#endif /* __LINUX_USB_IRDA_H */
+
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 3118ede2c67..0044d9b4cb8 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -22,8 +22,6 @@
*
* History:
* 0.1 04.01.2000 Created
- *
- * $Id: usbdevice_fs.h,v 1.1 2000/01/06 18:40:41 tom Exp $
*/
/*****************************************************************************/