aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-06-12[PATCH] alpha: generic hweight build fixRandy Dunlap
From: Randy Dunlap <rdunlap@xenotime.net> According to include/asm-alpha/bitops.h, only ALPHA_EV67 has hardware hweight support, so ALPHA_EV6 needs to use GENERIC_HWEIGHT. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ernst Herzberg <earny@net4u.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12[PATCH] tmpfs: Decrement i_nlink correctly in shmem_rmdir()Sergey Vlasov
shmem_rmdir() must undo the increment of i_nlink done in shmem_get_inode() for directories, otherwise at least IN_DELETE_SELF inotify event generation is broken. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12[PATCH] tmpfs: time granularity fix for [acm]time going backwardsRobin H. Johnson
I noticed a strange behavior in a tmpfs file system the other day, while building packages - occasionally, and seemingly at random, make decided to rebuild a target. However, only on tmpfs. A file would be created, and if checked, it had a sub-second timestamp. However, after an utimes related call where sub-seconds should be set, they were zeroed instead. In the case that a file was created, and utimes(...,NULL) was used on it in the same second, the timestamp on the file moved backwards. After some digging, I found that this was being caused by tmpfs not having a time granularity set, thus inheriting the default 1 second granularity. Hugh adds: yes, we missed tmpfs when the s_time_gran mods went into 2.6.11. Unfortunately, the granularity of CURRENT_TIME, often used in filesystems, does not match the default granularity set by alloc_super. A few more such discrepancies have been found, but this is the most important to fix now. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULE
2006-06-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4]: Increment ipInHdrErrors when TTL expires. [TCP]: continued: reno sacked_out count fix [DCCP] Ackvec: fix soft lockup in ackvec handling code
2006-06-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix Integrator and Versatile interrupt initialisation [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget [ARM] Fix Neponset IRQ handling
2006-06-12[IPV4]: Increment ipInHdrErrors when TTL expires.Weidong
Signed-off-by: Weidong <weid@nanjing-fnst.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-12[sky2] Fix sky2 network driver suspend/resumeLinus Torvalds
This fixes two independent problems: it would not save the PCI state on suspend (and thus try to resume a nonexistent state on resume), and while shut off, if an interrupt happened on the same shared irq, the irq handler would react very badly to the interrupt status being an invalid all-ones state. Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] sata_mv: grab host lock inside eng_timeout
2006-06-11[TCP]: continued: reno sacked_out count fixAki M Nyrhinen
From: Aki M Nyrhinen <anyrhine@cs.helsinki.fi> IMHO the current fix to the problem (in_flight underflow in reno) is incorrect. it treats the symptons but ignores the problem. the problem is timing out packets other than the head packet when we don't have sack. i try to explain (sorry if explaining the obvious). with sack, scanning the retransmit queue for timed out packets is fine because we know which packets in our retransmit queue have been acked by the receiver. without sack, we know only how many packets in our retransmit queue the receiver has acknowledged, but no idea which packets. think of a "typical" slow-start overshoot case, where for example every third packet in a window get lost because a router buffer gets full. with sack, we check for timeouts on those every third packet (as the rest have been sacked). the packet counting works out and if there is no reordering, we'll retransmit exactly the packets that were lost. without sack, however, we check for timeout on every packet and end up retransmitting consecutive packets in the retransmit queue. in our slow-start example, 2/3 of those retransmissions are unnecessary. these unnecessary retransmissions eat the congestion window and evetually prevent fast recovery from continuing, if enough packets were lost. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-11[DCCP] Ackvec: fix soft lockup in ackvec handling codeAndrea Bittau
A soft lockup existed in the handling of ack vector records. Specifically, when a tail of the list of ack vector records was removed, it was possible to end up iterating infinitely on an element of the tail. Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-11[SPARC64]: Do not double-export sys_close() when CONFIG_SOLARIS_EMUL_MODULEDavid S. Miller
It is already exported by fs/open.c Noticed by Ben Collins. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-11[PATCH] Fix for the PPTP hangs that have been reportedPaul Mackerras
People have been reporting that PPP connections over ptys, such as used with PPTP, will hang randomly when transferring large amounts of data, for instance in http://bugzilla.kernel.org/show_bug.cgi?id=6530. I have managed to reproduce the problem, and the patch below fixes the actual cause. The problem is not in fact in ppp_async.c but in n_tty.c. What happens is that when pptp reads from the pty, we call read_chan() in drivers/char/n_tty.c on the master side of the pty. That copies all the characters out of its buffer to userspace and then calls check_unthrottle(), which calls the pty unthrottle routine, which calls tty_wakeup on the slave side, which calls ppp_asynctty_wakeup, which calls tasklet_schedule. So far so good. Since we are in process context, the tasklet runs immediately and calls ppp_async_process(), which calls ppp_async_push, which calls the tty->driver->write function to send some more output. However, tty->driver->write() returns zero, because the master tty->receive_room is still zero. We haven't returned from check_unthrottle() yet, and read_chan() only updates tty->receive_room _after_ calling check_unthrottle. That means that the driver->write call in ppp_async_process() returns 0. That would be fine if we were going to get a subsequent wakeup call, but we aren't (we just had it, and the buffer is now empty). The solution is for n_tty.c to update tty->receive_room _before_ calling the driver unthrottle routine. The patch below does this. With this patch I was able to transfer a 900MB file over a PPTP connection (taking about 25 minutes), whereas without the patch the connection would always stall in under a minute. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-11[PATCH] sata_mv: grab host lock inside eng_timeoutMark Lord
Bug fix: mv_eng_timeout() calls mv_err_intr() without first grabbing the host lock, which can lead to all sorts of interesting scenarios. This whole error-handling portion of sata_mv is nasty (and will get fixed for the new EH stuff), but for now this patch will help keep it on life-support. Signed-off-by: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] PCI: reverse pci config space restore order [PATCH] PCI: Improve PCI config space writeback [PATCH] PCI: Error handling on PCI device resume [PATCH] PCI: fix pciehp compile issue when CONFIG_ACPI is not enabled
2006-06-11[PATCH] typo in vmscan.cChristoph Lameter
From: Christoph Lameter <clameter@sgi.com> Looks like a comma was left from the conversion from a struct to an assignment. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-11[PATCH] PCI: reverse pci config space restore orderYu, Luming
According to Intel ICH spec, there are several rules that Base Address should be programmed before IOSE (PCICMD register ) enabled. For example ICH7: 12.1.3 SATA : the base address register for the bus master register should be programmed before this bit is set. 11.1.3: PCICMD (USB): The base address register for USB should be programmed before this bit is set. .... To make sure kernel code follow this rule , and prevent unnecessary confusion. I proposal this patch. Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-11[PATCH] PCI: Improve PCI config space writebackDave Jones
At least one laptop blew up on resume from suspend with a black screen due to a lack of this patch. By only writing back config space that is different, we minimise the possibility of accidents like this. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-11[PATCH] PCI: Error handling on PCI device resumeJean Delvare
We currently don't handle errors properly when resuming a PCI device: * In pci_default_resume() we capture the error code returned by pci_enable_device() but don't pass it up to the caller. Introduced by commit 95a629657dbe28e44a312c47815b3dc3f1ce0970 * In pci_resume_device(), the errors possibly returned by the driver's .resume method or by the generic pci_default_resume() function are ignored. This patch fixes both issues. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-11[PATCH] PCI: fix pciehp compile issue when CONFIG_ACPI is not enabledakpm@osdl.org
Fix build error when CONFIG_ACPI not defined Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-10[SPARC]: Migration cost tune up in sparc smp.Krzysztof Helt
This patch sets the max_cache_size value required to tune up scheduler in SMP systems. Otherwise, the calculated migration_cost is too high and task scheduling may lock up. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10[SPARC64]: Set appropriate max_cache_size.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Avoid JBUS errors on some Niagara systems. [FUSION]: Fix mptspi.c build with CONFIG_PM not set. [TG3]: Handle Sun onboard tg3 chips more correctly. [SPARC64]: Dump local cpu registers in sun4v_log_error()
2006-06-10[PATCH] powerpc: console_initcall ordering issuesMilton Miller
From: Milton Miller <miltonm@bga.com> The add_preferred_console call in rtas_console.c was not causing the console to be selected. It turns out that the add_preferred_console was being called after the hvc_console driver was registered. It only works when it is called before the console driver is registered. Reorder hvc_console.o after the hvc_console drivers to allow the selection during console_initcall processing. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10[PATCH] I2O: Bugfixes to get I2O working againMarkus Lidel
From: Markus Lidel <Markus.Lidel@shadowconnect.com> - Fixed locking of struct i2o_exec_wait in Executive-OSM - Removed LCT Notify in i2o_exec_probe() which caused freeing memory and accessing freed memory during first enumeration of I2O devices - Added missing locking in i2o_exec_lct_notify() - removed put_device() of I2O controller in i2o_iop_remove() which caused the controller structure get freed to early - Fixed size of mempool in i2o_iop_alloc() - Fixed access to freed memory in i2o_msg_get() See http://bugzilla.kernel.org/show_bug.cgi?id=6561 Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10[PATCH] powernow-k8 crash workaroundAndrew Morton
From: Andrew Morton <akpm@osdl.org> Work around the oops reported in http://bugzilla.kernel.org/show_bug.cgi?id=6478. Thanks to Ralf Hildebrandt <ralf.hildebrandt@charite.de> for testing and reporting. Acked-by: Dave Jones <davej@codemonkey.org.uk> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10[PATCH] Further alterations for memory barrier documentDavid Howells
From: David Howells <dhowells@redhat.com> Apply some alterations to the memory barrier document that I worked out with Paul McKenney of IBM, plus some of the alterations suggested by Alan Stern. The following changes were made: (*) One of the examples given for what can happen with overlapping memory barriers was wrong. (*) The description of general memory barriers said that a general barrier is a combination of a read barrier and a write barrier. This isn't entirely true: it implies both, but is more than a combination of both. (*) The first example in the "SMP Barrier Pairing" section was wrong: the loads around the read barrier need to touch the memory locations in the opposite order to the stores around the write barrier. (*) Added a note to make explicit that the loads should be in reverse order to the stores. (*) Adjusted the diagrams in the "Examples Of Memory Barrier Sequences" section to make them clearer. Added a couple of diagrams to make it more clear as to how it could go wrong without the barrier. (*) Added a section on memory speculation. (*) Dropped any references to memory allocation routines doing memory barriers. They may do sometimes, but it can't be relied on. This may be worthy of further documentation later. (*) Made the fact that a LOCK followed by an UNLOCK should not be considered a full memory barrier more explicit and gave an example. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [PATCH] powerpc: Fix cell blade detection [PATCH] powerpc: Fix call to ibm,client-architecture-support powerpc: Fix machine check problem on 32-bit kernels
2006-06-10[ARM] Fix Integrator and Versatile interrupt initialisationRussell King
Both Integrator and Versatile were using set_irq_handler() and enable_irq(), and working around the initialisation of the chained interrupt, instead of the more correct set_irq_chained_handler() function. Fix Integrator and Versatile to use the right function, and remove these work-arounds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-10[SPARC64]: Avoid JBUS errors on some Niagara systems.David S. Miller
Doing PCI config space accesses to non-present PCI slots can result in fatal JBUS errors if the PCI config access hypervisor call is performed on cpus other than the boot cpu. PCI config space accesses to present PCI slots works just fine. Recursively traverse the OBP device tree under the PCI controller node and record all present device IDs into a small hash table. Avoid the hypervisor call for any PCI config space access attempt for a device not recorded in the hash table. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09[FUSION]: Fix mptspi.c build with CONFIG_PM not set.Tom "spot" Callaway
Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09[TG3]: Handle Sun onboard tg3 chips more correctly.David S. Miller
Get rid of all the SUN_570X logic and instead: 1) Make sure MEMARB_ENABLE is set when we probe the SRAM for config information. If that is off we will get timeouts. 2) Always try to sync with the firmware, if there is no firmware running do not treat it as an error and instead just report it the first time we notice this condition. 3) If there is no valid SRAM signature, assume the device is onboard by setting TG3_FLAG_EEPROM_WRITE_PROT. Update driver version and release date. With help from Michael Chan and Fabio Massimo Di Nitto. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09[SPARC64]: Dump local cpu registers in sun4v_log_error()David S. Miller
This makes the debugging information more usable. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09[PATCH] powerpc: Fix cell blade detectionArnd Bergmann
The IBM Cell blade firmware might confuse the kernel to think it's a pSeries machine. This fixes it for now. With a bit of luck, the firmware will be updated to avoid that in the future but currently that patch is needed. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-09[PATCH] powerpc: Fix call to ibm,client-architecture-supportBenjamin Herrenschmidt
The code in prom_init.c calling the firmware ibm,client-architecture-support method on pSeries has a bug where it fails to properly pass the instance handle of the firmware object when trying to call a method. Result ranges from the call doing nothing to the firmware crashing. (Found by Segher, thanks !) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-09powerpc: Fix machine check problem on 32-bit kernelsPaul Mackerras
This fixes a bug found by Dave Jones that means that it is possible for userspace to provoke a machine check on 32-bit kernels. This also fixes a couple of other places where I found similar problems by inspection. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-08Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: e1000: remove risky prefetch on next_skb->data e1000: fix ethtool test irq alloc as "probe" [PATCH] bcm43xx: add DMA rx poll workaround to DMA4
2006-06-08[PATCH] s390: fix in-user atomic futex operation.Martin Schwidefsky
From: Martin Schwidefsky <schwidefsky@de.ibm.com> __futex_atomic_op needs to do an atomic operation in the user address space, not the kernel address space. Add the missing sacf 256/sacf 0 to switch to the secondary mode before doing the compare-and-swap. In addition add another fixup for catch specification exceptions if the compare-and-swap address is not aligned. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[PATCH] debugfs inode leakJens Axboe
Looking at the reiser4 crash, I found a leak in debugfs. In debugfs_mknod(), we create the inode before checking if the dentry already has one attached. We don't free it if that is the case. These bugs happen quite often, I'm starting to think we should disallow such coding in CodingStyle. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[PATCH] elevator switching raceJens Axboe
There's a race between shutting down one io scheduler and firing up the next, in which a new io could enter and cause the io scheduler to be invoked with bad or NULL data. To fix this, we need to maintain the queue lock for a bit longer. Unfortunately we cannot do that, since the elevator init requires to be run without the lock held. This isn't easily fixable, without also changing the mempool API. So split the initialization into two parts, and alloc-init operation and an attach operation. Then we can preallocate the io scheduler and related structures, and run the attach inside the lock after we detach the old one. This patch has survived 30 minutes of 1 second io scheduler switching with a very busy io load. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[PATCH] fbcon: fix limited scroll in SCROLL_PAN_REDRAW modeMalcom Parsons
From: Malcom Parsons <malcolm.parsons@gmail.com> When scrolling up in SCROLL_PAN_REDRAW mode with a large limited scroll region, the bottom few lines have to be redrawn. Without this patch, the wrong text is drawn into these lines, corrupting the display. Observed in 2.6.14 when running an IRC client in the Nintendo DS linux port. I haven't tested if scrolling down has the same problem. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[PATCH] Fix mempolicy.h build errorRalf Baechle
From: Ralf Baechle <ralf@linux-mips.org> <linux/mempolicy.h> uses struct mm_struct and relies on a definition or declaration somehow magically being dragged in which may result in a build: [...] CC mm/mempolicy.o In file included from mm/mempolicy.c:69: include/linux/mempolicy.h:150: warning: ‘struct mm_struct’ declared inside parameter list include/linux/mempolicy.h:150: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/mempolicy.h:175: warning: ‘struct mm_struct’ declared inside parameter list mm/mempolicy.c:622: error: conflicting types for ‘do_migrate_pages’ include/linux/mempolicy.h:175: error: previous declaration of ‘do_migrate_pages’ was here mm/mempolicy.c:1661: error: conflicting types for ‘mpol_rebind_mm’ include/linux/mempolicy.h:150: error: previous declaration of ‘mpol_rebind_mm’ was here make[1]: *** [mm/mempolicy.o] Error 1 make: *** [mm] Error 2 [ralf@denk linux-ip35]$ Including <linux/sched.h> is a step into direction of include hell so fixed by adding a forward declaration of struct mm_struct instead. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[PATCH] ep93xx build fixLennert Buytenhek
From: Lennert Buytenhek <buytenh@wantstofly.org> The recent renaming of m48t86's ->readb() and ->writeb() platform driver methods (2d7b20c1884777e66009be1a533641c19c4705f6) to ->readbyte() and ->writebyte() to fix the ia64 build broke the build of the cirrus ep93xx ARM platform. This patch fixes it up. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[PATCH] Fix HPET operation on 64-bit NVIDIA platformsAndy Currid
From: "Andy Currid" <ACurrid@nvidia.com> This patch fixes a kernel panic during boot that occurs on NVIDIA platforms that have HPET enabled. When HPET is enabled, the standard timer IRQ is routed to IOAPIC pin 2 and is advertised as such in the ACPI APIC table - but an earlier workaround in the kernel was ignoring this override. The fix is to honor timer IRQ overrides from ACPI when HPET is detected on an NVIDIA platform. Signed-off-by: Andy Currid <acurrid@nvidia.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[PATCH] Fix HPET operation on 32-bit NVIDIA platformsAndy Currid
From: "Andy Currid" <ACurrid@nvidia.com> This patch fixes a kernel panic during boot that occurs on NVIDIA platforms that have HPET enabled. When HPET is enabled, the standard timer IRQ is routed to IOAPIC pin 2 and is advertised as such in the ACPI APIC table - but an earlier workaround in the kernel was ignoring this override. The fix is to honor timer IRQ overrides from ACPI when HPET is detected on an NVIDIA platform. Signed-off-by: Andy Currid <acurrid@nvidia.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MXMatt Reimer
Patch from Matt Reimer There is a subtle bug in the GPIO interrupt status register handling in arch/arm/mach-imx/irq.c:imx_gpio_ack_irq(). The documentation states that a 1 should be written to the relevant bit to acknowledge a GPIO interrupt, but that is not what the code does. The problem is that the |= writes back 1s for all the *other* interrupts represented in the register, so interrupts could get lost. For example, if interrupts are pending for GPIO B10 and B12, ISR_B would have the value 0x00001400. Then when the interrupt code handles GPIO B10, it eventually calls imx_gpio_ack_irq(IRQ_GPIOB(10)), which effectively does this: ISR_B |= 1 << 10; with the result that (0x00001400 | 0x00000400) is written, clearing the interrupt status bits for *both* GPIO B10 and B12. The fix is to write 1s only for the interrupts we want to clear. The same problem seems to be occurring in the DMA code; this patch does not address those issues. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-08[ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budgetRichard Purdie
Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-08Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes
2006-06-08Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-06-08[ARM] Fix Neponset IRQ handlingRussell King
While testing the genirq code on ARM, a condition was found whereby the Neponset IRQ handler was being re-entered, causing the system to deadlock. Under the ARM IRQ code, this would not have been a visible problem because the "simple" IRQ handling had no re-entrancy protection. Resolve this by acknowledging the parent interrupt after we mask it when we are going to handle one of our "special" level-based sources (from ethernet or USAR chip.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>