Age | Commit message (Collapse) | Author |
|
This patch carries over the OpenMoko modifications at
include/asm-arm/arch-s3c2410/spi-gpio.h to
arch/arm/mach-s3c2410/include/mach/spi-gpio.h
Note: board_size and board_info have been removed upstream, but as we
still rely on them we'll just put them back for now. These will need to
be removed (and the corresponding driver changes made, of course) before
this can go upstream.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This pulls the Moko changes to regs-sdi.h that were in
include/asm-arm/arch-s3c2410 over to the file at arch/arm/../mach and
deletes the file at include/asm-arm.
Note: we have been using a mix of regs-sdi.h from the two different
locations. The unification of these two files may have some unknown
consequences... keep your eyes open for oddities after applying this.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file already exists at arch/arm/mach-s3c2410/include/mach (where it
needs to be) and there are no OpenMoko changes to be carried over.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This "move" is not so much a file move as just carrying over the current
status of the irqs.h file from include/asm-arm/arch-s3c2410 to the file
at arch/arm/mach-s3c2410/include/mach. For some reason both files
existed and had become out of sync.
NOTE: Some of these changes look fishy... please check these properly.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This file was moved in the big file move, but some OpenMoko specific
changes did not make it. This patch peels out the relevant bits and
adds them to the gpio.h file in the upstream location.
The only OpenMoko specific change is the definition of gpio_to_irq and
irq_to_gpio. These functions should really be defined in gpio_chip and
asm-generic/gpio.h; this is coming soon, but until then we'll just use
the Moko definitions that we've been using up until now.
This is not strictly correct for the GTA02 case, but it works given
the configuration that's currently in use. This can be fixed (and
should become evident) when the configuration options are cleaned up.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file is OpenMoko specific and didn't get moved in the big file
move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs
and fix the references to it.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This patch adds the gta01 backlight callback that defers the
restoring of the backlight until after the jbt driver has
resumed. This doesn't eliminate the flashing of the LCD on
the gta01, but it reduces it considerably.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Touchscreen on GTA01-02 experiences noise on the channel that serves the
"tall axis" of the LCM. The sample quality of the other axis is good.
The bad samples have a characteristic of one shot excursions that can
reach +/- 20% or more of the sample average.
Previously, we had a simple averaging scheme going in the touchscreen
driver that summed up 32 x and ys and then divided it by 32. This patch
first tidies up the existing code for style, then adds a new "running
average" concept with a FIFO. The running average is separate from the
summing average mentioned above, and is accurate for the last n samples
sample-by-sample, where n is set by 1 << excursion_filter_len_bits in the
machine / platform stuff.
The heuristic the patch implements for the filtering is to accept all
samples, but tag the *previous* sample with a flag if it differed from
the running average by more than reject_threshold_vs_avg in either
axis. The next sample time, a beauty contest is held if the flag was
set to decide if we think the previous sample was a one-shot excursion
(detected by the new sample being closer to the average than to the
flagged previous sample), or if we believe we are moving (detected by
the new sample being closer to the flagged previous sample than the
average. In the case that we believe the previous sample was an
excursion, we simply overwrite it with the new data and adjust the
summing average to use the new data instead of the excursion data.
I only tested this by eyeballing the output of ts_print_raw, but it
seemed to be quite a bit better. Gross movement appeared to be
tracked fine too. If folks want to try different heuristics on top
of this patch, be my guest; either way feedback on what it looks like
with a graphical app would be good.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
Holger got beaten to it on mainline, they provide a
s3c2410_gpio_irq2pin() instead of the name he used.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Samsung SoC
Use this irq_to_gpio in the neo1973 keyboard driver
|
|
Add function
int gta02_get_pcb_revision(void)
which returns state of GTA02 PCB revision pins. It is also called
and logged during boot with KERN_INFO. The results look like:
b9 b8 b2 b1 b0
GPD4 GPD3 GPD0 GPC15 GPC13
GTA02 A5 and before: 0x000
GTA02 A6 : 0x001
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
On GTA02 we use FIQ to manage the vibrator IO now. That
is necessary because we stole timer3 from doing hw pwm
for vibrator. This keeps the same UI in /sys but does
"bitbang pwm" on the same vibrator GPIO
From: Andy Green <andy@openmoko.com>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This makes the FIQ stuff specific to one of the timers on the
s3c244x and adds the platform stuff for fiq in the gta02 init
Currently one sysfs node is exposed, a count of FIQ events
cat /sys/devices/platform/sc32440_fiq.0/fiq/count
From: Andy Green <andy@openmoko.com>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Adds a C-based FIQ ISR which is very convenient (and unusual --
normally you have to do FIQ ISR in assembler only).
Based on my article:
http://warmcat.com/_wp/2007/09/17/at91rm9200-fiq-faq-and-simple-example-code-patch/
Implemented as a platform device and driver.
Suspend / resume is tested and works.
Signed-off-by: Andy Green <andy@warmcat.com>
|
|
|
|
|
|
[ FIXME:
include/asm-arm/arch-s3c2410/irqs.h shouldn't contain device-specific
changes. ]
This is a Linux kernel driver for the Smedia Glamo336x / Glamo337x
multi-function peripheral device.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This is a MMC/SD driver for the Samsung S3C24xx SD/MMC controller, originally
developed years ago by Thomas Kleffel <tk@maintech.de>.
Due to time restraints, he had no time to further maintain the driver and
follow the mainline Linux changes in the SD/MMC stack.
With his authorization, I have taken over the task of making it compliant to
the current mainline SD/MMC API and take care of the mainline kernel merge.
After a potential kernel inclusion, we would co-maintain the driver.
Acked-by: Thomas Kleffel <tk@maintech.de>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
|
|
|
|
This patch adds a PWM api abstraction for the S3C2410 SoC
Signed-off-by: Javi Roman <javiroman@kernel-labs.org>
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This patch adds support for the FIC Neo1973 GTA01 machine type to the ARM port
of the Linux kernel.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
|
|
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The original "Pass the bus number we expect the S3C24XX SPI driver to
attach to via the platform data." [1] patch was mis-sent, and missed two
important parts of the diff, which was to actually set the bus_num field
and add the relevant field to the platform data.
The previous commit 50f426b55d919dd017af35bb6a08753d1f262920 promised to
add a bus_num field, but failed to include the two hunks that added this
field to include/asm-arm/arch-s3c2410/spi.h and then pass it to the spi
core when creating the new master field in drivers/spi/spi_s3c24xx.c.
[1] git commit 50f426b55d919dd017af35bb6a08753d1f262920
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the latest S3C MMC/SD driver by Thomas Kleffel
with cleanups as suggested by AKPM done by Ben Dooks.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Kleffel <tk@maintech.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
For s3c2412, set parent for clk_erefclk and clk_urefclk.
This allow for example to use xtal or extclk for i2s clock.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com>
|
|
Add support for gpilib on all S3C24XX platforms.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
|
|
This is a small addition of forgotten defines to regs-gpio.h include file for the Samsung S3C2410 ARM9 SoC
Signed-off-by: Davide Rizzo <davide@elpa.it>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
There seems to be some problem with at-least the S3C2440 and
bus traffic during an reset. It is unlikely, but still possible
that the system will hang in such a way that the watchdog cannot
get the system out of the state it is in.
Change to making the code that calls the watchdog reset run from
cached memory so that instruction fetches have quiesced before the
watchdog fires.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Fix the name of the S3C2412_CLKDIVN_ARMDIVN define.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Add initial defines for the S3C2412's memory controller registers.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The SPI core now expects num_chipselect to be set correctly as due to added
checks on the chip being selected before an transfer is allowed. This patch
adds a num_cs field to the platform data which needs to be set correctly
before adding the SPI platform device.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a bug correction for a macro that generated wrong results.
Nobody used it in official kernel tree, my driver did.
Signed-off-by: Davide Rizzo <davide@elpa.it>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|