path: root/drivers/hwmon/hdaps.c

/*
 * drivers/hwmon/hdaps.c - driver for IBM's Hard Drive Active Protection System
 *
 * Copyright (C) 2005 Robert Love <rml@novell.com>
 * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
 *
 * The HardDisk Active Protection System (hdaps) is present in the IBM ThinkPad
 * T41, T42, T43, R51, and X40, at least.  It provides a basic two-axis
 * accelerometer and other data, such as the device's temperature.
 *
 * Based on the document by Mark A. Smith available at
 * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial
 * and error.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License v2 as published by the
 * Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */

#include <linux/delay.h>
#include <linux/device.h>
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/timer.h>
#include <linux/dmi.h>
#include <asm/io.h>

#define HDAPS_LOW_PORT		0x1600	/* first port used by hdaps */
#define HDAPS_NR_PORTS		0x30	/* 0x1600 - 0x162f */

#define STATE_FRESH		0x50	/* accelerometer data is fresh */

#define REFRESH_ASYNC		0x00	/* do asynchronous refresh */
#define REFRESH_SYNC		0x01	/* do synchronous refresh */

#define HDAPS_PORT_STATE	0x1611	/* device state */
#define HDAPS_PORT_YPOS		0x1612	/* y-axis position */
#define	HDAPS_PORT_XPOS		0x1614	/* x-axis position */
#define HDAPS_PORT_TEMP1	0x1616	/* device temperature, in celcius */
#define HDAPS_PORT_YVAR		0x1617	/* y-axis variance (what is this?) */
#define HDAPS_PORT_XVAR		0x1619	/* x-axis variance (what is this?) */
#define HDAPS_PORT_TEMP2	0x161b	/* device temperature (again?) */
#define HDAPS_PORT_UNKNOWN	0x161c	/* what is this? */
#define HDAPS_PORT_KMACT	0x161d	/* keyboard or mouse activity */

#define HDAPS_READ_MASK		0xff	/* some reads have the low 8 bits set */

#define KEYBD_MASK		0x20	/* set if keyboard activity */
#define MOUSE_MASK		0x40	/* set if mouse activity */
#define KEYBD_ISSET(n)		(!! (n & KEYBD_MASK))	/* keyboard used? */
#define MOUSE_ISSET(n)		(!! (n & MOUSE_MASK))	/* mouse used? */

#define INIT_TIMEOUT_MSECS	4000	/* wait up to 4s for device init ... */
#define INIT_WAIT_MSECS		200	/* ... in 200ms increments */

static struct platform_device *pdev;
static struct input_dev hdaps_idev;
static struct timer_list hdaps_timer;
static unsigned int hdaps_mousedev_threshold = 4;
static unsigned long hdaps_poll_ms = 50;
static unsigned int hdaps_mousedev;
static unsigned int hdaps_invert;
static u8 km_activity;
static int rest_x;
static int rest_y;

static DECLARE_MUTEX(hdaps_sem);

/*
 * __get_latch - Get the value from a given port.  Callers must hold hdaps_sem.
 */
static inline u8 __get_latch(u16 port)
{
	return inb(port) & HDAPS_READ_MASK;
}

/*
 * __check_latch - Check a port latch for a given value.  Callers must hold
 * hdaps_sem.  Returns zero if the port contains the given value.
 */
static inline unsigned int __check_latch(u16 port, u8 val)
{
	if (__get_latch(port) == val)
		return 0;
	return -EINVAL;
}

/*
 * __wait_latch - Wait up to 100us for a port latch to get a certain value,
 * returning zero if the value is obtained.  Callers must hold hdaps_sem.
 */
static unsigned int __wait_latch(u16 port, u8 val)
{
	unsigned int i;

	for (i = 0; i < 20; i++) {
		if (!__check_latch(port, val))
			return 0;
		udelay(5);
	}

	return -EINVAL;
}

/*
 * __device_refresh - Request a refresh from the accelerometer.
 *
 * If sync is REFRESH_SYNC, we perform a synchronous refresh and will wait.
 * Returns zero if successful and nonzero on error.
 *
 * If sync is REFRESH_ASYNC, we merely kick off a new refresh if the device is
 * not up-to-date.  Always returns zero.
 *
 * Callers must hold hdaps_sem.
 */
static int __device_refresh(unsigned int sync)
{
	u8 state;

	udelay(100);

	state = inb(0x1604);
	if (state == STATE_FRESH)
		return 0;

	outb(0x11, 0x1610);
	outb(0x01, 0x161f);
	if (sync == REFRESH_ASYNC)
		return 0;

	return __wait_latch(0x1604, STATE_FRESH);
}

/*
 * __device_complete - Indicate to the accelerometer that we are done reading
 * data, and then initiate an async refresh.  Callers must hold hdaps_sem.
 */
static inline void __device_complete(void)
{
	inb(0x161f);
	inb(0x1604);
	__device_refresh(REFRESH_ASYNC);
}

static int __hdaps_readb_one(unsigned int port, u8 *val)
{
	/* do a sync refresh -- we need to be sure that we read fresh data */
	if (__device_refresh(REFRESH_SYNC))
		return -EIO;

	*val = inb(port);
	__device_complete();

	return 0;
}

/*
 * hdaps_readb_one - reads a byte from a single I/O port, placing the value in
 * the given pointer.  Returns zero on success or a negative error on failure.
 * Can sleep.
 */
static int hdaps_readb_one(unsigned int port, u8 *val)
{
	int ret;

	down(&hdaps_sem);
	ret = __hdaps_readb_one(port, val);
	up(&hdaps_sem);

	return ret;
}

static int __hdaps_read_pair(unsigned int port1, unsigned int port2,
			     int *x, int *y)
{
	/* do a sync refresh -- we need to be sure that we read fresh data */
	if (__device_refresh(REFRESH_SYNC))
		return -EIO;

	*y = inw(port2);
	*x = inw(port1);
	km_activity = inb(HDAPS_PORT_KMACT);
	__device_complete();

	/* if hdaps_invert is set, negate the two values */
	if (hdaps_invert) {
		*x = -*x;
		*y = -*y;
	}

	return 0;
}

/*
 * hdaps_read_pair - reads the values from a pair of ports, placing the values
 * in the given pointers.  Returns zero on success.  Can sleep.
 */
static int hdaps_read_pair(unsigned int port1, unsigned int port2,
			   int *val1, int *val2)
{
	int ret;

	down(&hdaps_sem);
	ret = __hdaps_read_pair(port1, port2, val1, val2);
	up(&hdaps_sem);

	return ret;
}

/* initialize the accelerometer */
static int hdaps_device_init(void)
{
	unsigned int total_msecs = INIT_TIMEOUT_MSECS;
	int ret = -ENXIO;

	down(&hdaps_sem);

	outb(0x13, 0x1610);
	outb(0x01, 0x161f);
	if (__wait_latch(0x161f, 0x00))
		goto out;

	/*
	 * The 0x03 value appears to only work on some thinkpads, such as the
	 * T42p.  Others return 0x01.
	 *
	 * The 0x02 value occurs when the chip has been previously initialized.
	 */
	if (__check_latch(0x1611, 0x03) &&
		     __check_latch(0x1611, 0x02) &&
		     __check_latch(0x1611, 0x01))
		goto out;

	printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x).\n",
	       __get_latch(0x1611));

	outb(0x17, 0x1610);
	outb(0x81, 0x1611);
	outb(0x01, 0x161f);
	if (__wait_latch(0x161f, 0x00))
		goto out;
	if (__wait_latch(0x1611, 0x00))
		goto out;
	if (__wait_latch(0x1612, 0x60))
		goto out;
	if (__wait_latch(0x1613, 0x00))
		goto out;
	outb(0x14, 0x1610);
	outb(0x01, 0x1611);
	outb(0x01, 0x161f);
	if (__wait_latch(0x161f, 0x00))
		goto out;
	outb(0x10, 0x1610);
	outb(0xc8, 0x1611);
	outb(0x00, 0x1612);
	outb(0x02, 0x1613);
	outb(0x01, 0x161f);
	if (__wait_latch(0x161f, 0x00))
		goto out;
	if (__device_refresh(REFRESH_SYNC))
		goto out;
	if (__wait_latch(0x1611, 0x00))
		goto out;

	/* we have done our dance, now let's wait for the applause */
	while (total_msecs > 0) {
		u8 ignored;

		/* a read of the device helps push it into action */
		__hdaps_readb_one(HDAPS_PORT_UNKNOWN, &ignored);
		if (!__wait_latch(0x1611, 0x02)) {
			ret = 0;
			break;
		}

		msleep(INIT_WAIT_MSECS);
		total_msecs -= INIT_WAIT_MSECS;
	}

out:
	up(&hdaps_sem);
	return ret;
}


/* Input class stuff */

/*
 * hdaps_calibrate - Zero out our "resting" values. Callers must hold hdaps_sem.
 */
static void hdaps_calibrate(void)
{
	int x, y;

	if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
		return;

	rest_x = x;
	rest_y = y;
}

static void hdaps_mousedev_poll(unsigned long unused)
{
	int x, y;

	/* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
	if (down_trylock(&hdaps_sem)) {
		mod_timer(&hdaps_timer,jiffies+msecs_to_jiffies(hdaps_poll_ms));
		return;
	}

	if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
		goto out;

	x -= rest_x;
	y -= rest_y;
	if (abs(x) > hdaps_mousedev_threshold)
		input_report_rel(&hdaps_idev, REL_X, x);
	if (abs(y) > hdaps_mousedev_threshold)
		input_report_rel(&hdaps_idev, REL_Y, y);
	input_sync(&hdaps_idev);

	mod_timer(&hdaps_timer, jiffies + msecs_to_jiffies(hdaps_poll_ms));

out:
	up(&hdaps_sem);
}

/*
 * hdaps_mousedev_enable - enable the input class device.  Can sleep.
 */
static void hdaps_mousedev_enable(void)
{
	down(&hdaps_sem);

	/* calibrate the device before enabling */
	hdaps_calibrate();

	/* initialize the input class */
	init_input_dev(&hdaps_idev);
	hdaps_idev.dev = &pdev->dev;
	hdaps_idev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
	hdaps_idev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
	hdaps_idev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT);
	input_register_device(&hdaps_idev);

	/* start up our timer */
	init_timer(&hdaps_timer);
	hdaps_timer.function = hdaps_mousedev_poll;
	hdaps_timer.expires = jiffies + msecs_to_jiffies(hdaps_poll_ms);
	add_timer(&hdaps_timer);

	hdaps_mousedev = 1;

	up(&hdaps_sem);

	printk(KERN_INFO "hdaps: input device enabled.\n");
}

/*
 * hdaps_mousedev_disable - disable the input class device.  Caller must hold
 * hdaps_sem.
 */
static void hdaps_mousedev_disable(void)
{
	down(&hdaps_sem);
	if (hdaps_mousedev) {
		hdaps_mousedev = 0;
		del_timer_sync(&hdaps_timer);
		input_unregister_device(&hdaps_idev);
	}
	up(&hdaps_sem);
}


/* Device model stuff */

static int hdaps_probe(struct device *dev)
{
	int ret;

	ret = hdaps_device_init();
	if (ret)
		return ret;

	printk(KERN_INFO "hdaps: device successfully initialized.\n");
	return 0;
}

static int hdaps_resume(struct device *dev, u32 level)
{
	if (level == RESUME_ENABLE)
		return hdaps_device_init();
	return 0;
}

static struct device_driver hdaps_driver = {
	.name = "hdaps",
	.bus = &platform_bus_type,
	.owner = THIS_MODULE,
	.probe = hdaps_probe,
	.resume = hdaps_resume
};


/* Sysfs Files */

static ssize_t hdaps_position_show(struct device *dev,
				   struct device_attribute *attr, char *buf)
{
	int ret, x, y;

	ret = hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y);
	if (ret)
		return ret;

	return sprintf(buf, "(%d,%d)\n", x, y);
}

static ssize_t hdaps_variance_show(struct device *dev,
				   struct device_attribute *attr, char *buf)
{
	int ret, x, y;

	ret = hdaps_read_pair(HDAPS_PORT_XVAR, HDAPS_PORT_YVAR, &x, &y);
	if (ret)
		return ret;

	return sprintf(buf, "(%d,%d)\n", x, y);
}

static ssize_t hdaps_temp1_show(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	u8 temp;
	int ret;

	ret = hdaps_readb_one(HDAPS_PORT_TEMP1, &temp);
	if (ret < 0)
		return ret;

	return sprintf(buf, "%u\n", temp);
}

static ssize_t hdaps_temp2_show(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	u8 temp;
	int ret;

	ret = hdaps_readb_one(HDAPS_PORT_TEMP2, &temp);
	if (ret < 0)
		return ret;

	return sprintf(buf, "%u\n", temp);
}

static ssize_t hdaps_keyboard_activity_show(struct device *dev,
					    struct device_attribute *attr,
					    char *buf)
{
	return sprintf(buf, "%u\n", KEYBD_ISSET(km_activity));
}

static ssize_t hdaps_mouse_activity_show(struct device *dev,
					 struct device_attribute *attr,
					 char *buf)
{
	return sprintf(buf, "%u\n", MOUSE_ISSET(km_activity));
}

static ssize_t hdaps_calibrate_show(struct device *dev,
				    struct device_attribute *attr, char *buf)
{
	return sprintf(buf, "(%d,%d)\n", rest_x, rest_y);
}

static ssize_t hdaps_calibrate_store(struct device *dev,
				     struct device_attribute *attr,
				     const char *buf, size_t count)
{
	down(&hdaps_sem);
	hdaps_calibrate();
	up(&hdaps_sem);

	return count;
}

static ssize_t hdaps_invert_show(struct device *dev,
				 struct device_attribute *attr, char *buf)
{
	return sprintf(buf, "%u\n", hdaps_invert);
}

static ssize_t hdaps_invert_store(struct device *dev,
				  struct device_attribute *attr,
				  const char *buf, size_t count)
{
	int invert;

	if (sscanf(buf, "%d", &invert) != 1 || (invert != 1 && invert != 0))
		return -EINVAL;

	hdaps_invert = invert;
	hdaps_calibrate();

	return count;
}

static ssize_t hdaps_mousedev_show(struct device *dev,
				   struct device_attribute *attr, char *buf)
{
	return sprintf(buf, "%d\n", hdaps_mousedev);
}

static ssize_t hdaps_mousedev_store(struct device *dev,
				    struct device_attribute *attr,
				    const char *buf, size_t count)
{
	int enable;

	if (sscanf(buf, "%d", &enable) != 1)
		return -EINVAL;

	if (enable == 1)
		hdaps_mousedev_enable();
	else if (enable == 0)
		hdaps_mousedev_disable();
	else
		return -EINVAL;

	return count;
}

static ssize_t hdaps_poll_show(struct device *dev,
			       struct device_attribute *attr, char *buf)
{
	return sprintf(buf, "%lu\n", hdaps_poll_ms);
}

static ssize_t hdaps_poll_store(struct device *dev,
				struct device_attribute *attr,
				const char *buf, size_t count)
{
	unsigned int poll;

	if (sscanf(buf, "%u", &poll) != 1 || poll == 0)
		return -EINVAL;
	hdaps_poll_ms = poll;

	return count;
}

static ssize_t hdaps_threshold_show(struct device *dev,
				    struct device_attribute *attr, char *buf)
{
	return sprintf(buf, "%u\n", hdaps_mousedev_threshold);
}

static ssize_t hdaps_threshold_store(struct device *dev,
				     struct device_attribute *attr,
				     const char *buf, size_t count)
{
	unsigned int threshold;

	if (sscanf(buf, "%u", &threshold) != 1 || threshold == 0)
		return -EINVAL;
	hdaps_mousedev_threshold = threshold;

	return count;
}

static DEVICE_ATTR(position, 0444, hdaps_position_show, NULL);
static DEVICE_ATTR(variance, 0444, hdaps_variance_show, NULL);
static DEVICE_ATTR(temp1, 0444, hdaps_temp1_show, NULL);
static DEVICE_ATTR(temp2, 0444, hdaps_temp2_show, NULL);
static DEVICE_ATTR(keyboard_activity, 0444, hdaps_keyboard_activity_show, NULL);
static DEVICE_ATTR(mouse_activity, 0444, hdaps_mouse_activity_show, NULL);
static DEVICE_ATTR(calibrate, 0644, hdaps_calibrate_show,hdaps_calibrate_store);
static DEVICE_ATTR(invert, 0644, hdaps_invert_show, hdaps_invert_store);
static DEVICE_ATTR(mousedev, 0644, hdaps_mousedev_show, hdaps_mousedev_store);
static DEVICE_ATTR(mousedev_poll_ms, 0644, hdaps_poll_show, hdaps_poll_store);
static DEVICE_ATTR(mousedev_threshold, 0644, hdaps_threshold_show,
		   hdaps_threshold_store);

static struct attribute *hdaps_attributes[] = {
	&dev_attr_position.attr,
	&dev_attr_variance.attr,
	&dev_attr_temp1.attr,
	&dev_attr_temp2.attr,
	&dev_attr_keyboard_activity.attr,
	&dev_attr_mouse_activity.attr,
	&dev_attr_calibrate.attr,
	&dev_attr_mousedev.attr,
	&dev_attr_mousedev_threshold.attr,
	&dev_attr_mousedev_poll_ms.attr,
	&dev_attr_invert.attr,
	NULL,
};

static struct attribute_group hdaps_attribute_group = {
	.attrs = hdaps_attributes,
};


/* Module stuff */

/*
 * XXX: We should be able to return nonzero and halt the detection process.
 * But there is a bug in dmi_check_system() where a nonzero return from the
 * first match will result in a return of failure from dmi_check_system().
 * I fixed this; the patch is in 2.6-mm.  Once in Linus's tree we can make
 * hdaps_dmi_match_invert() return hdaps_dmi_match(), which in turn returns 1.
 */
static int hdaps_dmi_match(struct dmi_system_id *id)
{
	printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
	return 0;
}

static int hdaps_dmi_match_invert(struct dmi_system_id *id)
{
	hdaps_invert = 1;
	printk(KERN_INFO "hdaps: inverting axis readings.\n");
	return 0;
}

#define HDAPS_DMI_MATCH_NORMAL(model)	{		\
	.ident = "IBM " model,				\
	.callback = hdaps_dmi_match,			\
	.matches = {					\
		DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),	\
		DMI_MATCH(DMI_PRODUCT_VERSION, model)	\
	}						\
}

#define HDAPS_DMI_MATCH_INVERT(model)	{		\
	.ident = "IBM " model,				\
	.callback = hdaps_dmi_match_invert,		\
	.matches = {					\
		DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),	\
		DMI_MATCH(DMI_PRODUCT_VERSION, model)	\
	}						\
}

static int __init hdaps_init(void)
{
	int ret;

	/* Note that DMI_MATCH(...,"ThinkPad T42") will match "ThinkPad T42p" */
	struct dmi_system_id hdaps_whitelist[] = {
		HDAPS_DMI_MATCH_INVERT("ThinkPad R50p"),
		HDAPS_DMI_MATCH_NORMAL("ThinkPad R50"),
		HDAPS_DMI_MATCH_NORMAL("ThinkPad R51"),
		HDAPS_DMI_MATCH_INVERT("ThinkPad T41p"),
		HDAPS_DMI_MATCH_NORMAL("ThinkPad T41"),
		HDAPS_DMI_MATCH_INVERT("ThinkPad T42p"),
		HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"),
		HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
		HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
		{ .ident = NULL }
	};

	if (!dmi_check_system(hdaps_whitelist)) {
		printk(KERN_WARNING "hdaps: supported laptop not found!\n");
		ret = -ENXIO;
		goto out;
	}

	if (!request_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS, "hdaps")) {
		ret = -ENXIO;
		goto out;
	}

	ret = driver_register(&hdaps_driver);
	if (ret)
		goto out_region;

	pdev = platform_device_register_simple("hdaps", -1, NULL, 0);
	if (IS_ERR(pdev)) {
		ret = PTR_ERR(pdev);
		goto out_driver;
	}

	ret = sysfs_create_group(&pdev->dev.kobj, &hdaps_attribute_group);
	if (ret)
		goto out_device;

	if (hdaps_mousedev)
		hdaps_mousedev_enable();

	printk(KERN_INFO "hdaps: driver successfully loaded.\n");
	return 0;

out_device:
	platform_device_unregister(pdev);
out_driver:
	driver_unregister(&hdaps_driver);
out_region:
	release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);
out:
	printk(KERN_WARNING "hdaps: driver init failed (ret=%d)!\n", ret);
	return ret;
}

static void __exit hdaps_exit(void)
{
	hdaps_mousedev_disable();

	sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
	platform_device_unregister(pdev);
	driver_unregister(&hdaps_driver);
	release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);

	printk(KERN_INFO "hdaps: driver unloaded.\n");
}

module_init(hdaps_init);
module_exit(hdaps_exit);

module_param_named(mousedev, hdaps_mousedev, bool, 0);
MODULE_PARM_DESC(mousedev, "enable the input class device");

module_param_named(invert, hdaps_invert, bool, 0);
MODULE_PARM_DESC(invert, "invert data along each axis");

MODULE_AUTHOR("Robert Love");
MODULE_DESCRIPTION("IBM Hard Drive Active Protection System (HDAPS) driver");
MODULE_LICENSE("GPL v2");