aboutsummaryrefslogtreecommitdiff
path: root/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/cpu/cpufreq/gx-suspmod.c')
-rw-r--r--arch/i386/kernel/cpu/cpufreq/gx-suspmod.c183
1 files changed, 90 insertions, 93 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
index e86ea486c31..92afa3bc84f 100644
--- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
@@ -6,12 +6,12 @@
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
+ * version 2 as published by the Free Software Foundation
*
* The author(s) of this software shall not be held liable for damages
* of any nature resulting due to the use of this software. This
* software is provided AS-IS with no warranties.
- *
+ *
* Theoritical note:
*
* (see Geode(tm) CS5530 manual (rev.4.1) page.56)
@@ -21,18 +21,18 @@
*
* Suspend Modulation works by asserting and de-asserting the SUSP# pin
* to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
- * the CPU enters an idle state. GX1 stops its core clock when SUSP# is
+ * the CPU enters an idle state. GX1 stops its core clock when SUSP# is
* asserted then power consumption is reduced.
*
- * Suspend Modulation's OFF/ON duration are configurable
+ * Suspend Modulation's OFF/ON duration are configurable
* with 'Suspend Modulation OFF Count Register'
* and 'Suspend Modulation ON Count Register'.
- * These registers are 8bit counters that represent the number of
+ * These registers are 8bit counters that represent the number of
* 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
* to the processor.
*
- * These counters define a ratio which is the effective frequency
- * of operation of the system.
+ * These counters define a ratio which is the effective frequency
+ * of operation of the system.
*
* OFF Count
* F_eff = Fgx * ----------------------
@@ -40,24 +40,24 @@
*
* 0 <= On Count, Off Count <= 255
*
- * From these limits, we can get register values
+ * From these limits, we can get register values
*
* off_duration + on_duration <= MAX_DURATION
* on_duration = off_duration * (stock_freq - freq) / freq
*
- * off_duration = (freq * DURATION) / stock_freq
- * on_duration = DURATION - off_duration
+ * off_duration = (freq * DURATION) / stock_freq
+ * on_duration = DURATION - off_duration
*
*
*---------------------------------------------------------------------------
*
* ChangeLog:
- * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org>
- * - fix on/off register mistake
- * - fix cpu_khz calc when it stops cpu modulation.
+ * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org>
+ * - fix on/off register mistake
+ * - fix cpu_khz calc when it stops cpu modulation.
*
- * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org>
- * - rewrite for Cyrix MediaGX Cx5510/5520 and
+ * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org>
+ * - rewrite for Cyrix MediaGX Cx5510/5520 and
* NatSemi Geode Cs5530(A).
*
* Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com>
@@ -74,40 +74,40 @@
************************************************************************/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/errno.h>
/* PCI config registers, all at F0 */
-#define PCI_PMER1 0x80 /* power management enable register 1 */
-#define PCI_PMER2 0x81 /* power management enable register 2 */
-#define PCI_PMER3 0x82 /* power management enable register 3 */
-#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */
-#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */
-#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */
-#define PCI_MODON 0x95 /* suspend modulation ON counter register */
-#define PCI_SUSCFG 0x96 /* suspend configuration register */
+#define PCI_PMER1 0x80 /* power management enable register 1 */
+#define PCI_PMER2 0x81 /* power management enable register 2 */
+#define PCI_PMER3 0x82 /* power management enable register 3 */
+#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */
+#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */
+#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */
+#define PCI_MODON 0x95 /* suspend modulation ON counter register */
+#define PCI_SUSCFG 0x96 /* suspend configuration register */
/* PMER1 bits */
-#define GPM (1<<0) /* global power management */
-#define GIT (1<<1) /* globally enable PM device idle timers */
-#define GTR (1<<2) /* globally enable IO traps */
-#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */
-#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */
+#define GPM (1<<0) /* global power management */
+#define GIT (1<<1) /* globally enable PM device idle timers */
+#define GTR (1<<2) /* globally enable IO traps */
+#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */
+#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */
/* SUSCFG bits */
-#define SUSMOD (1<<0) /* enable/disable suspend modulation */
-/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
-#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */
- /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
-#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
-/* the belows support only with cs5530A */
-#define PWRSVE_ISA (1<<3) /* stop ISA clock */
-#define PWRSVE (1<<4) /* active idle */
+#define SUSMOD (1<<0) /* enable/disable suspend modulation */
+/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
+#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */
+ /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
+#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
+/* the belows support only with cs5530A */
+#define PWRSVE_ISA (1<<3) /* stop ISA clock */
+#define PWRSVE (1<<4) /* active idle */
struct gxfreq_params {
u8 on_duration;
@@ -128,7 +128,7 @@ module_param (pci_busclk, int, 0444);
/* maximum duration for which the cpu may be suspended
* (32us * MAX_DURATION). If no parameter is given, this defaults
- * to 255.
+ * to 255.
* Note that this leads to a maximum of 8 ms(!) where the CPU clock
* is suspended -- processing power is just 0.39% of what it used to be,
* though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
@@ -144,17 +144,17 @@ module_param (max_duration, int, 0444);
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
/**
- * we can detect a core multipiler from dir0_lsb
- * from GX1 datasheet p.56,
- * MULT[3:0]:
- * 0000 = SYSCLK multiplied by 4 (test only)
- * 0001 = SYSCLK multiplied by 10
- * 0010 = SYSCLK multiplied by 4
- * 0011 = SYSCLK multiplied by 6
- * 0100 = SYSCLK multiplied by 9
- * 0101 = SYSCLK multiplied by 5
- * 0110 = SYSCLK multiplied by 7
- * 0111 = SYSCLK multiplied by 8
+ * we can detect a core multipiler from dir0_lsb
+ * from GX1 datasheet p.56,
+ * MULT[3:0]:
+ * 0000 = SYSCLK multiplied by 4 (test only)
+ * 0001 = SYSCLK multiplied by 10
+ * 0010 = SYSCLK multiplied by 4
+ * 0011 = SYSCLK multiplied by 6
+ * 0100 = SYSCLK multiplied by 9
+ * 0101 = SYSCLK multiplied by 5
+ * 0110 = SYSCLK multiplied by 7
+ * 0111 = SYSCLK multiplied by 8
* of 33.3MHz
**/
static int gx_freq_mult[16] = {
@@ -164,17 +164,17 @@ static int gx_freq_mult[16] = {
/****************************************************************
- * Low Level chipset interface *
+ * Low Level chipset interface *
****************************************************************/
static struct pci_device_id gx_chipset_tbl[] __initdata = {
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
- { 0, },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+ { 0, },
};
/**
- * gx_detect_chipset:
+ * gx_detect_chipset:
*
**/
static __init struct pci_dev *gx_detect_chipset(void)
@@ -182,17 +182,16 @@ static __init struct pci_dev *gx_detect_chipset(void)
struct pci_dev *gx_pci = NULL;
/* check if CPU is a MediaGX or a Geode. */
- if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
+ if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
(current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
dprintk("error: no MediaGX/Geode processor found!\n");
- return NULL;
+ return NULL;
}
/* detect which companion chip is used */
while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) {
- if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) {
+ if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
return gx_pci;
- }
}
dprintk("error: no supported chipset found!\n");
@@ -200,24 +199,24 @@ static __init struct pci_dev *gx_detect_chipset(void)
}
/**
- * gx_get_cpuspeed:
+ * gx_get_cpuspeed:
*
* Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
*/
static unsigned int gx_get_cpuspeed(unsigned int cpu)
{
- if ((gx_params->pci_suscfg & SUSMOD) == 0)
+ if ((gx_params->pci_suscfg & SUSMOD) == 0)
return stock_freq;
- return (stock_freq * gx_params->off_duration)
+ return (stock_freq * gx_params->off_duration)
/ (gx_params->on_duration + gx_params->off_duration);
}
/**
* gx_validate_speed:
* determine current cpu speed
- *
-**/
+ *
+ **/
static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
{
@@ -230,7 +229,7 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off
*on_duration=0;
for (i=max_duration; i>0; i--) {
- tmp_off = ((khz * i) / stock_freq) & 0xff;
+ tmp_off = ((khz * i) / stock_freq) & 0xff;
tmp_on = i - tmp_off;
tmp_freq = (stock_freq * tmp_off) / i;
/* if this relation is closer to khz, use this. If it's equal,
@@ -247,18 +246,17 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off
/**
- * gx_set_cpuspeed:
- * set cpu speed in khz.
+ * gx_set_cpuspeed:
+ * set cpu speed in khz.
**/
static void gx_set_cpuspeed(unsigned int khz)
{
- u8 suscfg, pmer1;
+ u8 suscfg, pmer1;
unsigned int new_khz;
unsigned long flags;
struct cpufreq_freqs freqs;
-
freqs.cpu = 0;
freqs.old = gx_get_cpuspeed(0);
@@ -303,18 +301,18 @@ static void gx_set_cpuspeed(unsigned int khz)
pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
- pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
- pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
+ pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+ pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
- local_irq_restore(flags);
+ local_irq_restore(flags);
gx_params->pci_suscfg = suscfg;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
- gx_params->on_duration * 32, gx_params->off_duration * 32);
- dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
+ dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+ gx_params->on_duration * 32, gx_params->off_duration * 32);
+ dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
}
/****************************************************************
@@ -322,10 +320,10 @@ static void gx_set_cpuspeed(unsigned int khz)
****************************************************************/
/*
- * cpufreq_gx_verify: test if frequency range is valid
+ * cpufreq_gx_verify: test if frequency range is valid
*
- * This function checks if a given frequency range in kHz is valid
- * for the hardware supported by the driver.
+ * This function checks if a given frequency range in kHz is valid
+ * for the hardware supported by the driver.
*/
static int cpufreq_gx_verify(struct cpufreq_policy *policy)
@@ -333,8 +331,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
unsigned int tmp_freq = 0;
u8 tmp1, tmp2;
- if (!stock_freq || !policy)
- return -EINVAL;
+ if (!stock_freq || !policy)
+ return -EINVAL;
policy->cpu = 0;
cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
@@ -342,14 +340,14 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
/* it needs to be assured that at least one supported frequency is
* within policy->min and policy->max. If it is not, policy->max
* needs to be increased until one freuqency is supported.
- * policy->min may not be decreased, though. This way we guarantee a
+ * policy->min may not be decreased, though. This way we guarantee a
* specific processing capacity.
*/
tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
- if (tmp_freq < policy->min)
+ if (tmp_freq < policy->min)
tmp_freq += stock_freq / max_duration;
policy->min = tmp_freq;
- if (policy->min > policy->max)
+ if (policy->min > policy->max)
policy->max = tmp_freq;
tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
if (tmp_freq > policy->max)
@@ -358,12 +356,12 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
if (policy->max < policy->min)
policy->max = policy->min;
cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
-
+
return 0;
}
/*
- * cpufreq_gx_target:
+ * cpufreq_gx_target:
*
*/
static int cpufreq_gx_target(struct cpufreq_policy *policy,
@@ -373,8 +371,8 @@ static int cpufreq_gx_target(struct cpufreq_policy *policy,
u8 tmp1, tmp2;
unsigned int tmp_freq;
- if (!stock_freq || !policy)
- return -EINVAL;
+ if (!stock_freq || !policy)
+ return -EINVAL;
policy->cpu = 0;
@@ -431,7 +429,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
return 0;
}
-/*
+/*
* cpufreq_gx_init:
* MediaGX/Geode GX initialize cpufreq driver
*/
@@ -452,7 +450,7 @@ static int __init cpufreq_gx_init(void)
u32 class_rev;
/* Test if we have the right hardware */
- if ((gx_pci = gx_detect_chipset()) == NULL)
+ if ((gx_pci = gx_detect_chipset()) == NULL)
return -ENODEV;
/* check whether module parameters are sane */
@@ -461,10 +459,9 @@ static int __init cpufreq_gx_init(void)
dprintk("geode suspend modulation available.\n");
- params = kmalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
+ params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
if (params == NULL)
return -ENOMEM;
- memset(params, 0, sizeof(struct gxfreq_params));
params->cs55x0 = gx_pci;
gx_params = params;
@@ -478,7 +475,7 @@ static int __init cpufreq_gx_init(void)
pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
params->pci_rev = class_rev && 0xff;
- if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
+ if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
kfree(params);
return ret; /* register error! */
}