diff options
Diffstat (limited to 'arch')
543 files changed, 11816 insertions, 14925 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index eedf41bf705..9bef61b3036 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -25,6 +25,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -447,6 +451,10 @@ config ALPHA_IRONGATE depends on ALPHA_NAUTILUS default y +config GENERIC_HWEIGHT + bool + default y if !ALPHA_EV6 && !ALPHA_EV67 + config ALPHA_AVANTI bool depends on ALPHA_XL || ALPHA_AVANTI_CH diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 7fb14f42a12..31afe3d91ac 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -821,7 +821,6 @@ osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, affects all sorts of things, like timeval and itimerval. */ extern struct timezone sys_tz; -extern int do_adjtimex(struct timex *); struct timeval32 { diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index b4e5f8ff2b2..dd876967059 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -34,6 +34,7 @@ #include <linux/root_dev.h> #include <linux/initrd.h> #include <linux/eisa.h> +#include <linux/pfn.h> #ifdef CONFIG_MAGIC_SYSRQ #include <linux/sysrq.h> #include <linux/reboot.h> @@ -42,7 +43,7 @@ #include <asm/setup.h> #include <asm/io.h> -extern struct notifier_block *panic_notifier_list; +extern struct atomic_notifier_head panic_notifier_list; static int alpha_panic_event(struct notifier_block *, unsigned long, void *); static struct notifier_block alpha_panic_block = { alpha_panic_event, @@ -241,9 +242,6 @@ reserve_std_resources(void) request_resource(io, standard_io_resources+i); } -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) #define PFN_MAX PFN_DOWN(0x80000000) #define for_each_mem_cluster(memdesc, cluster, i) \ for ((cluster) = (memdesc)->cluster, (i) = 0; \ @@ -472,11 +470,6 @@ page_is_ram(unsigned long pfn) return 0; } -#undef PFN_UP -#undef PFN_DOWN -#undef PFN_PHYS -#undef PFN_MAX - void __init setup_arch(char **cmdline_p) { @@ -507,7 +500,8 @@ setup_arch(char **cmdline_p) } /* Register a call for panic conditions. */ - notifier_chain_register(&panic_notifier_list, &alpha_panic_block); + atomic_notifier_chain_register(&panic_notifier_list, + &alpha_panic_block); #ifdef CONFIG_ALPHA_GENERIC /* Assume that we've booted from SRM if we haven't booted from MILO. diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index 6b2921be190..3859749810b 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -314,10 +314,11 @@ time_init(void) if (!est_cycle_freq) est_cycle_freq = validate_cc_value(calibrate_cc_with_pit()); - cc1 = rpcc_after_update_in_progress(); + cc1 = rpcc(); /* Calibrate CPU clock -- attempt #2. */ if (!est_cycle_freq) { + cc1 = rpcc_after_update_in_progress(); cc2 = rpcc_after_update_in_progress(); est_cycle_freq = validate_cc_value(cc2 - cc1); cc1 = cc2; diff --git a/arch/alpha/lib/ev6-memchr.S b/arch/alpha/lib/ev6-memchr.S index a8e843dbcc2..1a5f71b9d8b 100644 --- a/arch/alpha/lib/ev6-memchr.S +++ b/arch/alpha/lib/ev6-memchr.S @@ -84,7 +84,7 @@ $last_quad: beq $2, $not_found # U : U L U L $found_it: -#if defined(__alpha_fix__) && defined(__alpha_cix__) +#ifdef CONFIG_ALPHA_EV67 /* * Since we are guaranteed to have set one of the bits, we don't * have to worry about coming back with a 0x40 out of cttz... diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c index 97c4d9d7a4d..05017ba34c3 100644 --- a/arch/alpha/lib/fpreg.c +++ b/arch/alpha/lib/fpreg.c @@ -4,7 +4,7 @@ * (C) Copyright 1998 Linus Torvalds */ -#if defined(__alpha_cix__) || defined(__alpha_fix__) +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) #define STT(reg,val) asm volatile ("ftoit $f"#reg",%0" : "=r"(val)); #else #define STT(reg,val) asm volatile ("stt $f"#reg",%0" : "=m"(val)); @@ -53,7 +53,7 @@ alpha_read_fp_reg (unsigned long reg) return val; } -#if defined(__alpha_cix__) || defined(__alpha_fix__) +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) #define LDT(reg,val) asm volatile ("itoft %0,$f"#reg : : "r"(val)); #else #define LDT(reg,val) asm volatile ("ldt $f"#reg",%0" : : "m"(val)); @@ -98,7 +98,7 @@ alpha_write_fp_reg (unsigned long reg, unsigned long val) } } -#if defined(__alpha_cix__) || defined(__alpha_fix__) +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) #define STS(reg,val) asm volatile ("ftois $f"#reg",%0" : "=r"(val)); #else #define STS(reg,val) asm volatile ("sts $f"#reg",%0" : "=m"(val)); @@ -147,7 +147,7 @@ alpha_read_fp_reg_s (unsigned long reg) return val; } -#if defined(__alpha_cix__) || defined(__alpha_fix__) +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) #define LDS(reg,val) asm volatile ("itofs %0,$f"#reg : : "r"(val)); #else #define LDS(reg,val) asm volatile ("lds $f"#reg",%0" : : "m"(val)); diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 6d5251254f6..bf6b65c81be 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -13,6 +13,7 @@ #include <linux/bootmem.h> #include <linux/swap.h> #include <linux/initrd.h> +#include <linux/pfn.h> #include <asm/hwrpb.h> #include <asm/pgalloc.h> @@ -27,9 +28,6 @@ bootmem_data_t node_bdata[MAX_NUMNODES]; #define DBGDCONT(args...) #endif -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) #define for_each_mem_cluster(memdesc, cluster, i) \ for ((cluster) = (memdesc)->cluster, (i) = 0; \ (i) < (memdesc)->numclusters; (i)++, (cluster)++) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0dd24ebdf6a..ba46d779ede 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration" config ARM bool default y + select RTC_LIB help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -53,6 +54,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -148,6 +153,12 @@ config ARCH_IXP2000 help Support for Intel's IXP2400/2800 (XScale) family of processors. +config ARCH_IXP23XX + bool "IXP23XX-based" + select PCI + help + Support for Intel's IXP23xx (XScale) family of processors. + config ARCH_L7200 bool "LinkUp-L7200" select FIQ @@ -269,6 +280,8 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-ixp2000/Kconfig" +source "arch/arm/mach-ixp23xx/Kconfig" + source "arch/arm/mach-pxa/Kconfig" source "arch/arm/mach-sa1100/Kconfig" @@ -787,7 +800,8 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ + || ARCH_IXP23XX source "drivers/ide/Kconfig" endif @@ -835,6 +849,8 @@ source "drivers/usb/Kconfig" source "drivers/mmc/Kconfig" +source "drivers/rtc/Kconfig" + endmenu source "fs/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index b5b1e408751..ce3e804ea0f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -1,6 +1,9 @@ # # arch/arm/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -54,6 +57,7 @@ tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale +tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) ifeq ($(CONFIG_AEABI),y) @@ -94,6 +98,7 @@ endif machine-$(CONFIG_ARCH_IOP3XX) := iop3xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 + machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 incdir-$(CONFIG_ARCH_OMAP) := omap @@ -177,7 +182,7 @@ endif archprepare: maketools -.PHONY: maketools FORCE +PHONY += maketools FORCE maketools: include/linux/version.h include/asm-arm/.arch FORCE $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index a174d63395e..ec9c400c7f8 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -1,6 +1,9 @@ # # arch/arm/boot/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -73,7 +76,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) @echo ' Kernel: $@ is ready' -.PHONY: initrd FORCE +PHONY += initrd FORCE initrd: @test "$(INITRD_PHYS)" != "" || \ (echo This machine does not support INITRD; exit -1) diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile index 8e8879b6b3d..c394e305447 100644 --- a/arch/arm/boot/bootp/Makefile +++ b/arch/arm/boot/bootp/Makefile @@ -1,6 +1,9 @@ # # linux/arch/arm/boot/bootp/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# LDFLAGS_bootp :=-p --no-undefined -X \ --defsym initrd_phys=$(INITRD_PHYS) \ @@ -21,4 +24,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FORCE $(obj)/initrd.o: $(INITRD) FORCE -.PHONY: $(INITRD) FORCE +PHONY += $(INITRD) FORCE diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 35ffe0f4ece..2adc1527e0e 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -50,10 +50,6 @@ ifeq ($(CONFIG_ARCH_AT91RM9200),y) OBJS += head-at91rm9200.o endif -ifeq ($(CONFIG_DEBUG_ICEDCC),y) -OBJS += ice-dcc.o -endif - ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) OBJS += big-endian.o endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index db3389d8e02..491c7e4c9ac 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -358,7 +358,7 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size str r1, [r0] mov pc, lr -__armv4_cache_on: +__armv4_mmu_cache_on: mov r12, lr bl __setup_mmu mov r0, #0 @@ -367,24 +367,24 @@ __armv4_cache_on: mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x0030 - bl __common_cache_on + bl __common_mmu_cache_on mov r0, #0 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs mov pc, r12 -__arm6_cache_on: +__arm6_mmu_cache_on: mov r12, lr bl __setup_mmu mov r0, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3 mov r0, #0x30 - bl __common_cache_on + bl __common_mmu_cache_on mov r0, #0 mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3 mov pc, r12 -__common_cache_on: +__common_mmu_cache_on: #ifndef DEBUG orr r0, r0, #0x000d @ Write buffer, mmu #endif @@ -471,12 +471,12 @@ call_cache_fn: adr r12, proc_types proc_types: .word 0x41560600 @ ARM6/610 .word 0xffffffe0 - b __arm6_cache_off @ works, but slow - b __arm6_cache_off + b __arm6_mmu_cache_off @ works, but slow + b __arm6_mmu_cache_off mov pc, lr -@ b __arm6_cache_on @ untested -@ b __arm6_cache_off -@ b __armv3_cache_flush +@ b __arm6_mmu_cache_on @ untested +@ b __arm6_mmu_cache_off +@ b __armv3_mmu_cache_flush .word 0x00000000 @ old ARM ID .word 0x0000f000 @@ -486,14 +486,14 @@ proc_types: .word 0x41007000 @ ARM7/710 .word 0xfff8fe00 - b __arm7_cache_off - b __arm7_cache_off + b __arm7_mmu_cache_off + b __arm7_mmu_cache_off mov pc, lr .word 0x41807200 @ ARM720T (writethrough) .word 0xffffff00 - b __armv4_cache_on - b __armv4_cache_off + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off mov pc, lr .word 0x00007000 @ ARM7 IDs @@ -506,41 +506,41 @@ proc_types: .word 0x4401a100 @ sa110 / sa1100 .word 0xffffffe0 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush .word 0x6901b110 @ sa1110 .word 0xfffffff0 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush @ These match on the architecture ID .word 0x00020000 @ ARMv4T .word 0x000f0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush .word 0x00050000 @ ARMv5TE .word 0x000f0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush .word 0x00060000 @ ARMv5TEJ .word 0x000f0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush .word 0x00070000 @ ARMv6 .word 0x000f0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv6_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv6_mmu_cache_flush .word 0 @ unrecognised type .word 0 @@ -562,7 +562,7 @@ proc_types: cache_off: mov r3, #12 @ cache_off function b call_cache_fn -__armv4_cache_off: +__armv4_mmu_cache_off: mrc p15, 0, r0, c1, c0 bic r0, r0, #0x000d mcr p15, 0, r0, c1, c0 @ turn MMU and cache off @@ -571,15 +571,15 @@ __armv4_cache_off: mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4 mov pc, lr -__arm6_cache_off: +__arm6_mmu_cache_off: mov r0, #0x00000030 @ ARM6 control reg. - b __armv3_cache_off + b __armv3_mmu_cache_off -__arm7_cache_off: +__arm7_mmu_cache_off: mov r0, #0x00000070 @ ARM7 control reg. - b __armv3_cache_off + b __armv3_mmu_cache_off -__armv3_cache_off: +__armv3_mmu_cache_off: mcr p15, 0, r0, c1, c0, 0 @ turn MMU and cache off mov r0, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 @@ -601,7 +601,7 @@ cache_clean_flush: mov r3, #16 b call_cache_fn -__armv6_cache_flush: +__armv6_mmu_cache_flush: mov r1, #0 mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB @@ -609,7 +609,7 @@ __armv6_cache_flush: mcr p15, 0, r1, c7, c10, 4 @ drain WB mov pc, lr -__armv4_cache_flush: +__armv4_mmu_cache_flush: mov r2, #64*1024 @ default: 32K dcache size (*2) mov r11, #32 @ default: 32 byte line size mrc p15, 0, r3, c0, c0, 1 @ read cache type @@ -637,7 +637,7 @@ no_cache_id: mcr p15, 0, r1, c7, c10, 4 @ drain WB mov pc, lr -__armv3_cache_flush: +__armv3_mmu_cache_flush: mov r1, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 mov pc, lr diff --git a/arch/arm/boot/compressed/ice-dcc.S b/arch/arm/boot/compressed/ice-dcc.S deleted file mode 100644 index 104377a199b..00000000000 --- a/arch/arm/boot/compressed/ice-dcc.S +++ /dev/null @@ -1,17 +0,0 @@ - - - .text - - .global icedcc_putc - -icedcc_putc: - mov r2, #0x4000000 -1: - subs r2, r2, #1 - movlt pc, r14 - mrc p14, 0, r1, c0, c0, 0 - tst r1, #2 - bne 1b - - mcr p14, 0, r0, c1, c0, 0 - mov pc, r14 diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 5ab94584bae..0af3772efcb 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -20,24 +20,45 @@ unsigned int __machine_arch_type; #include <linux/string.h> -#include <asm/arch/uncompress.h> - #ifdef STANDALONE_DEBUG #define putstr printf -#endif +#else + +static void putstr(const char *ptr); + +#include <linux/compiler.h> +#include <asm/arch/uncompress.h> #ifdef CONFIG_DEBUG_ICEDCC -#define putstr icedcc_putstr -#define putc icedcc_putc +static void icedcc_putc(int ch) +{ + int status, i = 0x4000000; -extern void icedcc_putc(int ch); + do { + if (--i < 0) + return; -static void -icedcc_putstr(const char *ptr) + asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status)); + } while (status & 2); + + asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch)); +} + +#define putc(ch) icedcc_putc(ch) +#define flush() do { } while (0) +#endif + +static void putstr(const char *ptr) { - for (; *ptr != '\0'; ptr++) { - icedcc_putc(*ptr); + char c; + + while ((c = *ptr++) != '\0') { + if (c == '\n') + putc('\r'); + putc(c); } + + flush(); } #endif diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index e851d86c212..35c9a64ac14 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -20,6 +20,7 @@ #include <linux/capability.h> #include <linux/device.h> #include <linux/mutex.h> +#include <linux/rtc.h> #include <asm/rtc.h> #include <asm/semaphore.h> @@ -42,89 +43,6 @@ static struct rtc_ops *rtc_ops; #define rtc_epoch 1900UL -static const unsigned char days_in_month[] = { - 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 -}; - -#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400) -#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400)) - -static int month_days(unsigned int month, unsigned int year) -{ - return days_in_month[month] + (LEAP_YEAR(year) && month == 1); -} - -/* - * Convert seconds since 01-01-1970 00:00:00 to Gregorian date. - */ -void rtc_time_to_tm(unsigned long time, struct rtc_time *tm) -{ - int days, month, year; - - days = time / 86400; - time -= days * 86400; - - tm->tm_wday = (days + 4) % 7; - - year = 1970 + days / 365; - days -= (year - 1970) * 365 - + LEAPS_THRU_END_OF(year - 1) - - LEAPS_THRU_END_OF(1970 - 1); - if (days < 0) { - year -= 1; - days += 365 + LEAP_YEAR(year); - } - tm->tm_year = year - 1900; - tm->tm_yday = days + 1; - - for (month = 0; month < 11; month++) { - int newdays; - - newdays = days - month_days(month, year); - if (newdays < 0) - break; - days = newdays; - } - tm->tm_mon = month; - tm->tm_mday = days + 1; - - tm->tm_hour = time / 3600; - time -= tm->tm_hour * 3600; - tm->tm_min = time / 60; - tm->tm_sec = time - tm->tm_min * 60; -} -EXPORT_SYMBOL(rtc_time_to_tm); - -/* - * Does the rtc_time represent a valid date/time? - */ -int rtc_valid_tm(struct rtc_time *tm) -{ - if (tm->tm_year < 70 || - tm->tm_mon >= 12 || - tm->tm_mday < 1 || - tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) || - tm->tm_hour >= 24 || - tm->tm_min >= 60 || - tm->tm_sec >= 60) - return -EINVAL; - - return 0; -} -EXPORT_SYMBOL(rtc_valid_tm); - -/* - * Convert Gregorian date to seconds since 01-01-1970 00:00:00. - */ -int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time) -{ - *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday, - tm->tm_hour, tm->tm_min, tm->tm_sec); - - return 0; -} -EXPORT_SYMBOL(rtc_tm_to_time); - /* * Calculate the next alarm time given the requested alarm time mask * and the current time. @@ -151,13 +69,13 @@ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc } } -static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm) +static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm) { memset(tm, 0, sizeof(struct rtc_time)); return ops->read_time(tm); } -static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm) +static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm) { int ret; @@ -168,7 +86,7 @@ static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm) return ret; } -static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) +static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) { int ret = -EINVAL; if (ops->read_alarm) { @@ -178,7 +96,7 @@ static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) return ret; } -static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) +static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) { int ret = -EINVAL; if (ops->set_alarm) @@ -266,7 +184,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, switch (cmd) { case RTC_ALM_READ: - ret = rtc_read_alarm(ops, &alrm); + ret = rtc_arm_read_alarm(ops, &alrm); if (ret) break; ret = copy_to_user(uarg, &alrm.time, sizeof(tm)); @@ -288,11 +206,11 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, alrm.time.tm_wday = -1; alrm.time.tm_yday = -1; alrm.time.tm_isdst = -1; - ret = rtc_set_alarm(ops, &alrm); + ret = rtc_arm_set_alarm(ops, &alrm); break; case RTC_RD_TIME: - ret = rtc_read_time(ops, &tm); + ret = rtc_arm_read_time(ops, &tm); if (ret) break; ret = copy_to_user(uarg, &tm, sizeof(tm)); @@ -310,7 +228,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ret = -EFAULT; break; } - ret = rtc_set_time(ops, &tm); + ret = rtc_arm_set_time(ops, &tm); break; case RTC_EPOCH_SET: @@ -341,11 +259,11 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ret = -EFAULT; break; } - ret = rtc_set_alarm(ops, &alrm); + ret = rtc_arm_set_alarm(ops, &alrm); break; case RTC_WKALM_RD: - ret = rtc_read_alarm(ops, &alrm); + ret = rtc_arm_read_alarm(ops, &alrm); if (ret) break; ret = copy_to_user(uarg, &alrm, sizeof(alrm)); @@ -435,7 +353,7 @@ static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eo struct rtc_time tm; char *p = page; - if (rtc_read_time(ops, &tm) == 0) { + if (rtc_arm_read_time(ops, &tm) == 0) { p += sprintf(p, "rtc_time\t: %02d:%02d:%02d\n" "rtc_date\t: %04d-%02d-%02d\n" @@ -445,7 +363,7 @@ static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eo rtc_epoch); } - if (rtc_read_alarm(ops, &alrm) == 0) { + if (rtc_arm_read_alarm(ops, &alrm) == 0) { p += sprintf(p, "alrm_time\t: "); if ((unsigned int)alrm.time.tm_hour <= 24) p += sprintf(p, "%02d:", alrm.time.tm_hour); diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig new file mode 100644 index 00000000000..1a2751e9ab0 --- /dev/null +++ b/arch/arm/configs/ixp23xx_defconfig @@ -0,0 +1,1302 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16 +# Tue Mar 21 03:27:20 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +CONFIG_ARCH_IXP23XX=y +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP23xx Implementation Options +# + +# +# IXP23xx Platforms +# +CONFIG_MACH_ESPRESSO=y +CONFIG_MACH_IXDP2351=y +CONFIG_MACH_ROADRUNNER=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_IO_36=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +CONFIG_CPU_BIG_ENDIAN=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +CONFIG_WAN=y +# CONFIG_DSCC4 is not set +# CONFIG_LANMEDIA is not set +# CONFIG_SYNCLINK_SYNCPPP is not set +CONFIG_HDLC=y +CONFIG_HDLC_RAW=y +# CONFIG_HDLC_RAW_ETH is not set +CONFIG_HDLC_CISCO=y +CONFIG_HDLC_FR=y +CONFIG_HDLC_PPP=y + +# +# X.25/LAPB support is disabled +# +# CONFIG_PCI200SYN is not set +# CONFIG_WANXL is not set +# CONFIG_PC300 is not set +# CONFIG_FARSYNC is not set +CONFIG_DLCI=y +CONFIG_DLCI_COUNT=24 +CONFIG_DLCI_MAX=8 +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 55c99cdab7d..f1c2fd5b63e 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -37,24 +37,6 @@ #endif .endm -#if __LINUX_ARM_ARCH__ >= 6 - .macro disable_irq - cpsid i - .endm - - .macro enable_irq - cpsie i - .endm -#else - .macro disable_irq - msr cpsr_c, #PSR_I_BIT | SVC_MODE - .endm - - .macro enable_irq - msr cpsr_c, #SVC_MODE - .endm -#endif - .macro get_thread_info, rd mov \rd, sp, lsr #13 mov \rd, \rd, lsl #13 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 84277fe818a..53b6901f70a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -81,6 +81,7 @@ ENTRY(stext) msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode @ and irqs disabled + mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? beq __error_p @ yes, error 'p' @@ -155,6 +156,7 @@ ENTRY(secondary_startup) * as it has already been validated by the primary processor. */ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC + mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type movs r10, r5 @ invalid processor? moveq r0, #'p' @ yes, error 'p' @@ -449,19 +451,19 @@ __error: * (and therefore, we are not in the correct address space). We have to * calculate the offset. * + * r9 = cpuid * Returns: * r3, r4, r6 corrupted * r5 = proc_info pointer in physical address space - * r9 = cpuid + * r9 = cpuid (preserved) */ .type __lookup_processor_type, %function __lookup_processor_type: adr r3, 3f - ldmda r3, {r5, r6, r9} - sub r3, r3, r9 @ get offset between virt&phys + ldmda r3, {r5 - r7} + sub r3, r3, r7 @ get offset between virt&phys add r5, r5, r3 @ convert virt addresses to add r6, r6, r3 @ physical address space - mrc p15, 0, r9, c0, c0 @ get processor id 1: ldmia r5, {r3, r4} @ value, mask and r4, r4, r9 @ mask wanted bits teq r3, r4 @@ -476,10 +478,11 @@ __lookup_processor_type: * This provides a C-API version of the above function. */ ENTRY(lookup_processor_type) - stmfd sp!, {r4 - r6, r9, lr} + stmfd sp!, {r4 - r7, r9, lr} + mov r9, r0 bl __lookup_processor_type mov r0, r5 - ldmfd sp!, {r4 - r6, r9, pc} + ldmfd sp!, {r4 - r7, r9, pc} /* * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 08974cbe982..b7cd280bfd6 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -278,7 +278,7 @@ int cpu_architecture(void) * These functions re-use the assembly code in head.S, which * already provide the required functionality. */ -extern struct proc_info_list *lookup_processor_type(void); +extern struct proc_info_list *lookup_processor_type(unsigned int); extern struct machine_desc *lookup_machine_type(unsigned int); static void __init setup_processor(void) @@ -290,7 +290,7 @@ static void __init setup_processor(void) * types. The linker builds this table for us from the * entries in arch/arm/mm/proc-*.S */ - list = lookup_processor_type(); + list = lookup_processor_type(processor_id); if (!list) { printk("CPU configuration botched (ID %08x), unable " "to continue.\n", processor_id); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 02aa300c463..1370d726dc1 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -337,9 +337,6 @@ void __init smp_prepare_boot_cpu(void) unsigned int cpu = smp_processor_id(); per_cpu(cpu_data, cpu).idle = current; - - cpu_set(cpu, cpu_present_map); - cpu_set(cpu, cpu_online_map); } static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index a491de2d902..8170af47143 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -234,7 +234,12 @@ asmlinkage int sys_ipc(uint call, int first, int second, int third, */ asmlinkage int sys_fork(struct pt_regs *regs) { +#ifdef CONFIG_MMU return do_fork(SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL); +#else + /* can not support in nommu mode */ + return(-EINVAL); +#endif } /* Clone a task - this clones the calling program thread. diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 03924bcc612..d566d5f4574 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -506,7 +506,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if (!pmd_present(*pmd)) goto bad_access; pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - if (!pte_present(*pte) || !pte_write(*pte)) { + if (!pte_present(*pte) || !pte_dirty(*pte)) { pte_unmap_unlock(pte, ptl); goto bad_access; } diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 391f3ab3ff3..7b726b627ea 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -18,7 +18,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ # the code in uaccess.S is not preemption safe and # probably faster on ARMv3 only -ifeq ($CONFIG_PREEMPT,y) +ifeq ($(CONFIG_PREEMPT),y) lib-y += copy_from_user.o copy_to_user.o else ifneq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index 68a21c0f3f5..3bdc8c6949c 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -29,7 +29,7 @@ ENTRY(__backtrace) ENTRY(c_backtrace) -#ifndef CONFIG_FRAME_POINTER +#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) mov pc, lr #else diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S index 838e435e492..cab355c0c1f 100644 --- a/arch/arm/lib/copy_template.S +++ b/arch/arm/lib/copy_template.S @@ -236,7 +236,7 @@ /* - * Abort preanble and completion macros. + * Abort preamble and completion macros. * If a fixup handler is required then those macros must surround it. * It is assumed that the fixup code will handle the private part of * the exit macro. diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 865427bfad7..2d892e4daa0 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -30,7 +30,9 @@ #include <linux/time.h> #include <linux/timex.h> #include <linux/delay.h> +#include <linux/termios.h> #include <linux/amba/bus.h> +#include <linux/amba/serial.h> #include <asm/types.h> #include <asm/setup.h> @@ -360,6 +362,68 @@ void __init ep93xx_init_irq(void) /************************************************************************* * EP93xx peripheral handling *************************************************************************/ +#define EP93XX_UART_MCR_OFFSET (0x0100) + +static void ep93xx_uart_set_mctrl(struct amba_device *dev, + void __iomem *base, unsigned int mctrl) +{ + unsigned int mcr; + + mcr = 0; + if (!(mctrl & TIOCM_RTS)) + mcr |= 2; + if (!(mctrl & TIOCM_DTR)) + mcr |= 1; + + __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); +} + +static struct amba_pl010_data ep93xx_uart_data = { + .set_mctrl = ep93xx_uart_set_mctrl, +}; + +static struct amba_device uart1_device = { + .dev = { + .bus_id = "apb:uart1", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART1_PHYS_BASE, + .end = EP93XX_UART1_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART1, NO_IRQ }, + .periphid = 0x00041010, +}; + +static struct amba_device uart2_device = { + .dev = { + .bus_id = "apb:uart2", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART2_PHYS_BASE, + .end = EP93XX_UART2_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART2, NO_IRQ }, + .periphid = 0x00041010, +}; + +static struct amba_device uart3_device = { + .dev = { + .bus_id = "apb:uart3", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART3_PHYS_BASE, + .end = EP93XX_UART3_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART3, NO_IRQ }, + .periphid = 0x00041010, +}; + void __init ep93xx_init_devices(void) { unsigned int v; @@ -371,4 +435,8 @@ void __init ep93xx_init_devices(void) v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE; __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); + + amba_device_register(&uart1_device, &iomem_resource); + amba_device_register(&uart2_device, &iomem_resource); + amba_device_register(&uart3_device, &iomem_resource); } diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c index 2c64a0b0502..5d02e95dede 100644 --- a/arch/arm/mach-footbridge/time.c +++ b/arch/arm/mach-footbridge/time.c @@ -34,27 +34,12 @@ static int rtc_base; static unsigned long __init get_isa_cmos_time(void) { unsigned int year, mon, day, hour, min, sec; - int i; // check to see if the RTC makes sense..... if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0) return mktime(1970, 1, 1, 0, 0, 0); - /* The Linux interpretation of the CMOS clock register contents: - * When the Update-In-Progress (UIP) flag goes from 1 to 0, the - * RTC registers show the second which has precisely just started. - * Let's hope other operating systems interpret the RTC the same way. - */ - /* read RTC exactly on falling edge of update flag */ - for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ - if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) - break; - - for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */ - if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) - break; - - do { /* Isn't this overkill ? UIP above should guarantee consistency */ + do { sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES); hour = CMOS_READ(RTC_HOURS); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 20071a2767c..576a5e979c0 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -15,7 +15,9 @@ #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/smp.h> +#include <linux/termios.h> #include <linux/amba/bus.h> +#include <linux/amba/serial.h> #include <asm/hardware.h> #include <asm/irq.h> @@ -28,6 +30,8 @@ #include "common.h" +static struct amba_pl010_data integrator_uart_data; + static struct amba_device rtc_device = { .dev = { .bus_id = "mb:15", @@ -44,6 +48,7 @@ static struct amba_device rtc_device = { static struct amba_device uart0_device = { .dev = { .bus_id = "mb:16", + .platform_data = &integrator_uart_data, }, .res = { .start = INTEGRATOR_UART0_BASE, @@ -57,6 +62,7 @@ static struct amba_device uart0_device = { static struct amba_device uart1_device = { .dev = { .bus_id = "mb:17", + .platform_data = &integrator_uart_data, }, .res = { .start = INTEGRATOR_UART1_BASE, @@ -115,6 +121,46 @@ static int __init integrator_init(void) arch_initcall(integrator_init); +/* + * On the Integrator platform, the port RTS and DTR are provided by + * bits in the following SC_CTRLS register bits: + * RTS DTR + * UART0 7 6 + * UART1 5 4 + */ +#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET) +#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET) + +static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) +{ + unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + + if (dev == &uart0_device) { + rts_mask = 1 << 4; + dtr_mask = 1 << 5; + } else { + rts_mask = 1 << 6; + dtr_mask = 1 << 7; + } + + if (mctrl & TIOCM_RTS) + ctrlc |= rts_mask; + else + ctrls |= rts_mask; + + if (mctrl & TIOCM_DTR) + ctrlc |= dtr_mask; + else + ctrls |= dtr_mask; + + __raw_writel(ctrls, SC_CTRLS); + __raw_writel(ctrlc, SC_CTRLC); +} + +static struct amba_pl010_data integrator_uart_data = { + .set_mctrl = integrator_uart_set_mctrl, +}; + #define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET static DEFINE_SPINLOCK(cm_lock); diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c index 3c22c16b38b..bc07f52a6fd 100644 --- a/arch/arm/mach-integrator/time.c +++ b/arch/arm/mach-integrator/time.c @@ -40,13 +40,13 @@ static int integrator_set_rtc(void) return 1; } -static int rtc_read_alarm(struct rtc_wkalrm *alrm) +static int integrator_rtc_read_alarm(struct rtc_wkalrm *alrm) { rtc_time_to_tm(readl(rtc_base + RTC_MR), &alrm->time); return 0; } -static inline int rtc_set_alarm(struct rtc_wkalrm *alrm) +static inline int integrator_rtc_set_alarm(struct rtc_wkalrm *alrm) { unsigned long time; int ret; @@ -62,7 +62,7 @@ static inline int rtc_set_alarm(struct rtc_wkalrm *alrm) return ret; } -static int rtc_read_time(struct rtc_time *tm) +static int integrator_rtc_read_time(struct rtc_time *tm) { rtc_time_to_tm(readl(rtc_base + RTC_DR), tm); return 0; @@ -76,7 +76,7 @@ static int rtc_read_time(struct rtc_time *tm) * edge of the 1Hz clock, we must write the time one second * in advance. */ -static inline int rtc_set_time(struct rtc_time *tm) +static inline int integrator_rtc_set_time(struct rtc_time *tm) { unsigned long time; int ret; @@ -90,10 +90,10 @@ static inline int rtc_set_time(struct rtc_time *tm) static struct rtc_ops rtc_ops = { .owner = THIS_MODULE, - .read_time = rtc_read_time, - .set_time = rtc_set_time, - .read_alarm = rtc_read_alarm, - .set_alarm = rtc_set_alarm, + .read_time = integrator_rtc_read_time, + .set_time = integrator_rtc_set_time, + .read_alarm = integrator_rtc_read_alarm, + .set_alarm = integrator_rtc_set_alarm, }; static irqreturn_t arm_rtc_interrupt(int irq, void *dev_id, diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index 2d6abe5be14..7b7b6eea384 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -103,7 +103,7 @@ static struct plat_serial8250_port iop33x_uart1_data[] = { static struct platform_device iop33x_uart0 = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = iop33x_uart0_data, .num_resources = 2, .resource = iop33x_uart0_resources, @@ -111,7 +111,7 @@ static struct platform_device iop33x_uart0 = { static struct platform_device iop33x_uart1 = { .name = "serial8250", - .id = 1, + .id = PLAT8250_DEV_PLATFORM1, .dev.platform_data = iop33x_uart1_data, .num_resources = 2, .resource = iop33x_uart1_resources, diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index f9d4968c1d6..66915282a46 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -30,6 +30,7 @@ #include <linux/tty.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/serial_8250.h> #include <asm/io.h> #include <asm/irq.h> @@ -132,7 +133,7 @@ void __init ixdp2x01_init_irq(void) /************************************************************************* - * IXDP2x01 memory map and serial ports + * IXDP2x01 memory map *************************************************************************/ static struct map_desc ixdp2x01_io_desc __initdata = { .virtual = IXDP2X01_VIRT_CPLD_BASE, @@ -141,40 +142,78 @@ static struct map_desc ixdp2x01_io_desc __initdata = { .type = MT_DEVICE }; -static struct uart_port ixdp2x01_serial_ports[2] = { +static void __init ixdp2x01_map_io(void) +{ + ixp2000_map_io(); + iotable_init(&ixdp2x01_io_desc, 1); +} + + +/************************************************************************* + * IXDP2x01 serial ports + *************************************************************************/ +static struct plat_serial8250_port ixdp2x01_serial_port1[] = { { - .membase = (char *)(IXDP2X01_UART1_VIRT_BASE), .mapbase = (unsigned long)IXDP2X01_UART1_PHYS_BASE, + .membase = (char *)IXDP2X01_UART1_VIRT_BASE, .irq = IRQ_IXDP2X01_UART1, - .flags = UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM32, .regshift = 2, .uartclk = IXDP2X01_UART_CLK, - .line = 1, - .type = PORT_16550A, - .fifosize = 16 - }, { - .membase = (char *)(IXDP2X01_UART2_VIRT_BASE), + }, + { } +}; + +static struct resource ixdp2x01_uart_resource1 = { + .start = IXDP2X01_UART1_PHYS_BASE, + .end = IXDP2X01_UART1_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp2x01_serial_device1 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = ixdp2x01_serial_port1, + }, + .num_resources = 1, + .resource = &ixdp2x01_uart_resource1, +}; + +static struct plat_serial8250_port ixdp2x01_serial_port2[] = { + { .mapbase = (unsigned long)IXDP2X01_UART2_PHYS_BASE, + .membase = (char *)IXDP2X01_UART2_VIRT_BASE, .irq = IRQ_IXDP2X01_UART2, - .flags = UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM32, .regshift = 2, .uartclk = IXDP2X01_UART_CLK, - .line = 2, - .type = PORT_16550A, - .fifosize = 16 }, + { } }; -static void __init ixdp2x01_map_io(void) -{ - ixp2000_map_io(); +static struct resource ixdp2x01_uart_resource2 = { + .start = IXDP2X01_UART2_PHYS_BASE, + .end = IXDP2X01_UART2_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, +}; - iotable_init(&ixdp2x01_io_desc, 1); +static struct platform_device ixdp2x01_serial_device2 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = ixdp2x01_serial_port2, + }, + .num_resources = 1, + .resource = &ixdp2x01_uart_resource2, +}; - early_serial_setup(&ixdp2x01_serial_ports[0]); - early_serial_setup(&ixdp2x01_serial_ports[1]); +static void ixdp2x01_uart_init(void) +{ + platform_device_register(&ixdp2x01_serial_device1); + platform_device_register(&ixdp2x01_serial_device2); } @@ -374,6 +413,7 @@ static void __init ixdp2x01_init_machine(void) platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices)); ixp2000_uart_init(); + ixdp2x01_uart_init(); } diff --git a/arch/arm/mach-ixp23xx/Kconfig b/arch/arm/mach-ixp23xx/Kconfig new file mode 100644 index 00000000000..982670ec386 --- /dev/null +++ b/arch/arm/mach-ixp23xx/Kconfig @@ -0,0 +1,25 @@ +if ARCH_IXP23XX + +config ARCH_SUPPORTS_BIG_ENDIAN + bool + default y + +menu "Intel IXP23xx Implementation Options" + +comment "IXP23xx Platforms" + +config MACH_ESPRESSO + bool "Support IP Fabrics Double Espresso platform" + help + +config MACH_IXDP2351 + bool "Support Intel IXDP2351 platform" + help + +config MACH_ROADRUNNER + bool "Support ADI RoadRunner platform" + help + +endmenu + +endif diff --git a/arch/arm/mach-ixp23xx/Makefile b/arch/arm/mach-ixp23xx/Makefile new file mode 100644 index 00000000000..288b371b6d0 --- /dev/null +++ b/arch/arm/mach-ixp23xx/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# +obj-y := core.o pci.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_MACH_ESPRESSO) += espresso.o +obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o +obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot new file mode 100644 index 00000000000..d5561ad15ba --- /dev/null +++ b/arch/arm/mach-ixp23xx/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c new file mode 100644 index 00000000000..092ee12ced4 --- /dev/null +++ b/arch/arm/mach-ixp23xx/core.c @@ -0,0 +1,431 @@ +/* + * arch/arm/mach-ixp23xx/core.c + * + * Core routines for IXP23xx chips + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2004 (c) Intel Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/bitops.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/time.h> +#include <linux/timex.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/tlbflush.h> +#include <asm/pgtable.h> + +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/mach/arch.h> + + +/************************************************************************* + * Chip specific mappings shared by all IXP23xx systems + *************************************************************************/ +static struct map_desc ixp23xx_io_desc[] __initdata = { + { /* XSI-CPP CSRs */ + .virtual = IXP23XX_XSI2CPP_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS), + .length = IXP23XX_XSI2CPP_CSR_SIZE, + .type = MT_DEVICE, + }, { /* Expansion Bus Config */ + .virtual = IXP23XX_EXP_CFG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS), + .length = IXP23XX_EXP_CFG_SIZE, + .type = MT_DEVICE, + }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */ + .virtual = IXP23XX_PERIPHERAL_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS), + .length = IXP23XX_PERIPHERAL_SIZE, + .type = MT_DEVICE, + }, { /* CAP CSRs */ + .virtual = IXP23XX_CAP_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS), + .length = IXP23XX_CAP_CSR_SIZE, + .type = MT_DEVICE, + }, { /* MSF CSRs */ + .virtual = IXP23XX_MSF_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS), + .length = IXP23XX_MSF_CSR_SIZE, + .type = MT_DEVICE, + }, { /* PCI I/O Space */ + .virtual = IXP23XX_PCI_IO_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS), + .length = IXP23XX_PCI_IO_SIZE, + .type = MT_DEVICE, + }, { /* PCI Config Space */ + .virtual = IXP23XX_PCI_CFG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS), + .length = IXP23XX_PCI_CFG_SIZE, + .type = MT_DEVICE, + }, { /* PCI local CFG CSRs */ + .virtual = IXP23XX_PCI_CREG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS), + .length = IXP23XX_PCI_CREG_SIZE, + .type = MT_DEVICE, + }, { /* PCI MEM Space */ + .virtual = IXP23XX_PCI_MEM_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS), + .length = IXP23XX_PCI_MEM_SIZE, + .type = MT_DEVICE, + } +}; + +void __init ixp23xx_map_io(void) +{ + iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc)); +} + + +/*************************************************************************** + * IXP23xx Interrupt Handling + ***************************************************************************/ +enum ixp23xx_irq_type { + IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE +}; + +static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type); + +static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP23XX_GPIO6 + 6; + u32 int_style; + enum ixp23xx_irq_type irq_type; + volatile u32 *int_reg; + + /* + * Only GPIOs 6-15 are wired to interrupts on IXP23xx + */ + if (line < 6 || line > 15) + return -EINVAL; + + switch (type) { + case IRQT_BOTHEDGE: + int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_RISING: + int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_FALLING: + int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_HIGH: + int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; + irq_type = IXP23XX_IRQ_LEVEL; + break; + case IRQT_LOW: + int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; + irq_type = IXP23XX_IRQ_LEVEL; + break; + default: + return -EINVAL; + } + + ixp23xx_config_irq(irq, irq_type); + + if (line >= 8) { /* pins 8-15 */ + line -= 8; + int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R; + } else { /* pins 0-7 */ + int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R; + } + + /* + * Clear pending interrupts + */ + *IXP23XX_GPIO_GPISR = (1 << line); + + /* Clear the style for the appropriate pin */ + *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK << + (line * IXP23XX_GPIO_STYLE_SIZE)); + + /* Set the new style */ + *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE)); + + return 0; +} + +static void ixp23xx_irq_mask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + *intr_reg &= ~(1 << (irq % 32)); +} + +static void ixp23xx_irq_ack(unsigned int irq) +{ + int line = irq - IRQ_IXP23XX_GPIO6 + 6; + + if ((line < 6) || (line > 15)) + return; + + *IXP23XX_GPIO_GPISR = (1 << line); +} + +/* + * Level triggered interrupts on GPIO lines can only be cleared when the + * interrupt condition disappears. + */ +static void ixp23xx_irq_level_unmask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + ixp23xx_irq_ack(irq); + + *intr_reg |= (1 << (irq % 32)); +} + +static void ixp23xx_irq_edge_unmask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + *intr_reg |= (1 << (irq % 32)); +} + +static struct irqchip ixp23xx_irq_level_chip = { + .ack = ixp23xx_irq_mask, + .mask = ixp23xx_irq_mask, + .unmask = ixp23xx_irq_level_unmask, + .set_type = ixp23xx_irq_set_type +}; + +static struct irqchip ixp23xx_irq_edge_chip = { + .ack = ixp23xx_irq_ack, + .mask = ixp23xx_irq_mask, + .unmask = ixp23xx_irq_edge_unmask, + .set_type = ixp23xx_irq_set_type +}; + +static void ixp23xx_pci_irq_mask(unsigned int irq) +{ + *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq)); +} + +static void ixp23xx_pci_irq_unmask(unsigned int irq) +{ + *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq)); +} + +/* + * TODO: Should this just be done at ASM level? + */ +static void pci_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u32 pci_interrupt; + unsigned int irqno; + struct irqdesc *int_desc; + + pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS; + + desc->chip->ack(irq); + + /* See which PCI_INTA, or PCI_INTB interrupted */ + if (pci_interrupt & (1 << 26)) { + irqno = IRQ_IXP23XX_INTB; + } else if (pci_interrupt & (1 << 27)) { + irqno = IRQ_IXP23XX_INTA; + } else { + BUG(); + } + + int_desc = irq_desc + irqno; + int_desc->handle(irqno, int_desc, regs); + + desc->chip->unmask(irq); +} + +static struct irqchip ixp23xx_pci_irq_chip = { + .ack = ixp23xx_pci_irq_mask, + .mask = ixp23xx_pci_irq_mask, + .unmask = ixp23xx_pci_irq_unmask +}; + +static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type) +{ + switch (type) { + case IXP23XX_IRQ_LEVEL: + set_irq_chip(irq, &ixp23xx_irq_level_chip); + set_irq_handler(irq, do_level_IRQ); + break; + case IXP23XX_IRQ_EDGE: + set_irq_chip(irq, &ixp23xx_irq_edge_chip); + set_irq_handler(irq, do_edge_IRQ); + break; + } + set_irq_flags(irq, IRQF_VALID); +} + +void __init ixp23xx_init_irq(void) +{ + int irq; + + /* Route everything to IRQ */ + *IXP23XX_INTR_SEL1 = 0x0; + *IXP23XX_INTR_SEL2 = 0x0; + *IXP23XX_INTR_SEL3 = 0x0; + *IXP23XX_INTR_SEL4 = 0x0; + + /* Mask all sources */ + *IXP23XX_INTR_EN1 = 0x0; + *IXP23XX_INTR_EN2 = 0x0; + *IXP23XX_INTR_EN3 = 0x0; + *IXP23XX_INTR_EN4 = 0x0; + + /* + * Configure all IRQs for level-sensitive operation + */ + for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) { + ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL); + } + + for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) { + set_irq_chip(irq, &ixp23xx_pci_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler); +} + + +/************************************************************************* + * Timer-tick functions for IXP23xx + *************************************************************************/ +#define CLOCK_TICKS_PER_USEC CLOCK_TICK_RATE / (USEC_PER_SEC) + +static unsigned long next_jiffy_time; + +static unsigned long +ixp23xx_gettimeoffset(void) +{ + unsigned long elapsed; + + elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH); + + return elapsed / CLOCK_TICKS_PER_USEC; +} + +static irqreturn_t +ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Clear Pending Interrupt by writing '1' to it */ + *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; + while ((*IXP23XX_TIMER_CONT - next_jiffy_time) > LATCH) { + timer_tick(regs); + next_jiffy_time += LATCH; + } + + return IRQ_HANDLED; +} + +static struct irqaction ixp23xx_timer_irq = { + .name = "IXP23xx Timer Tick", + .handler = ixp23xx_timer_interrupt, + .flags = SA_INTERRUPT | SA_TIMER, +}; + +void __init ixp23xx_init_timer(void) +{ + /* Clear Pending Interrupt by writing '1' to it */ + *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; + + /* Setup the Timer counter value */ + *IXP23XX_TIMER1_RELOAD = + (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE; + + *IXP23XX_TIMER_CONT = 0; + next_jiffy_time = LATCH; + + /* Connect the interrupt handler and enable the interrupt */ + setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq); +} + +struct sys_timer ixp23xx_timer = { + .init = ixp23xx_init_timer, + .offset = ixp23xx_gettimeoffset, +}; + + +/************************************************************************* + * IXP23xx Platform Initializaion + *************************************************************************/ +static struct resource ixp23xx_uart_resources[] = { + { + .start = IXP23XX_UART1_PHYS, + .end = IXP23XX_UART1_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, { + .start = IXP23XX_UART2_PHYS, + .end = IXP23XX_UART2_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port ixp23xx_uart_data[] = { + { + .mapbase = IXP23XX_UART1_PHYS, + .membase = (char *)(IXP23XX_UART1_VIRT + 3), + .irq = IRQ_IXP23XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP23XX_UART_XTAL, + }, { + .mapbase = IXP23XX_UART2_PHYS, + .membase = (char *)(IXP23XX_UART2_VIRT + 3), + .irq = IRQ_IXP23XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP23XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device ixp23xx_uart = { + .name = "serial8250", + .id = 0, + .dev.platform_data = ixp23xx_uart_data, + .num_resources = 2, + .resource = ixp23xx_uart_resources, +}; + +static struct platform_device *ixp23xx_devices[] __initdata = { + &ixp23xx_uart, +}; + +void __init ixp23xx_sys_init(void) +{ + platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); +} diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c new file mode 100644 index 00000000000..2327c979041 --- /dev/null +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -0,0 +1,69 @@ +/* + * arch/arm/mach-ixp23xx/espresso.c + * + * Double Espresso-specific routines + * + * Author: Lennert Buytenhek <buytenh@wantstofly.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/bitops.h> +#include <linux/ioport.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/pci.h> +#include <linux/mtd/physmap.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/tlbflush.h> +#include <asm/pgtable.h> + +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/pci.h> + +static void __init espresso_init(void) +{ + physmap_configure(0x90000000, 0x02000000, 2, NULL); + + /* + * Mark flash as writeable. + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") + /* Maintainer: Lennert Buytenhek */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixp23xx_map_io, + .init_irq = ixp23xx_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = espresso_init, +MACHINE_END diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c new file mode 100644 index 00000000000..00146c35daa --- /dev/null +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -0,0 +1,325 @@ +/* + * arch/arm/mach-ixp23xx/ixdp2351.c + * + * IXDP2351 board-specific routines + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2004 (c) Intel Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/bitops.h> +#include <linux/ioport.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/pci.h> +#include <linux/mtd/physmap.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/tlbflush.h> +#include <asm/pgtable.h> + +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/pci.h> + +/* + * IXDP2351 Interrupt Handling + */ +static void ixdp2351_inta_mask(unsigned int irq) +{ + *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(irq); +} + +static void ixdp2351_inta_unmask(unsigned int irq) +{ + *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq); +} + +static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u16 ex_interrupt = + *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID; + int i; + + desc->chip->mask(irq); + + for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) { + if (ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = + IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i); + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2351_inta_chip = { + .ack = ixdp2351_inta_mask, + .mask = ixdp2351_inta_mask, + .unmask = ixdp2351_inta_unmask +}; + +static void ixdp2351_intb_mask(unsigned int irq) +{ + *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(irq); +} + +static void ixdp2351_intb_unmask(unsigned int irq) +{ + *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq); +} + +static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u16 ex_interrupt = + *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID; + int i; + + desc->chip->ack(irq); + + for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) { + if (ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = + IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i); + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2351_intb_chip = { + .ack = ixdp2351_intb_mask, + .mask = ixdp2351_intb_mask, + .unmask = ixdp2351_intb_unmask +}; + +void ixdp2351_init_irq(void) +{ + int irq; + + /* Mask all interrupts from CPLD, disable simulation */ + *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1; + *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1; + *IXDP2351_CPLD_INTA_SIM_REG = 0; + *IXDP2351_CPLD_INTB_SIM_REG = 0; + + ixp23xx_init_irq(); + + for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE); + irq < + IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM); + irq++) { + if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) { + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, do_level_IRQ); + set_irq_chip(irq, &ixdp2351_inta_chip); + } + } + + for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE); + irq < + IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM); + irq++) { + if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) { + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, do_level_IRQ); + set_irq_chip(irq, &ixdp2351_intb_chip); + } + } + + set_irq_chained_handler(IRQ_IXP23XX_INTA, &ixdp2351_inta_handler); + set_irq_chained_handler(IRQ_IXP23XX_INTB, &ixdp2351_intb_handler); +} + +/* + * IXDP2351 PCI + */ + +/* + * This board does not do normal PCI IRQ routing, or any + * sort of swizzling, so we just need to check where on the + * bus the device is and figure out what CPLD pin it is + * being routed to. + */ +#define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) + +static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + u8 bus = dev->bus->number; + u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); + struct pci_bus *tmp_bus = dev->bus; + + /* Primary bus, no interrupts here */ + if (!bus) + return -1; + + /* Lookup first leaf in bus tree */ + while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) + tmp_bus = tmp_bus->parent; + + /* Select between known bridges */ + switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { + /* Device is located after first bridge */ + case 0x0008: + if (tmp_bus == dev->bus) { + /* Device is located directy after first bridge */ + switch (devpin) { + /* Onboard 82546 */ + case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ + return IRQ_IXDP2351_INTA_82546; + case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ + return IRQ_IXDP2351_INTB_82546; + /* PMC SLOT */ + case DEVPIN(0, 1): /* PMCP INTA# */ + case DEVPIN(2, 4): /* PMCS INTD# */ + return IRQ_IXDP2351_SPCI_PMC_INTA; + case DEVPIN(0, 2): /* PMCP INTB# */ + case DEVPIN(2, 1): /* PMCS INTA# */ + return IRQ_IXDP2351_SPCI_PMC_INTB; + case DEVPIN(0, 3): /* PMCP INTC# */ + case DEVPIN(2, 2): /* PMCS INTB# */ + return IRQ_IXDP2351_SPCI_PMC_INTC; + case DEVPIN(0, 4): /* PMCP INTD# */ + case DEVPIN(2, 3): /* PMCS INTC# */ + return IRQ_IXDP2351_SPCI_PMC_INTD; + } + } else { + /* Device is located indirectly after first bridge */ + /* Not supported now */ + return -1; + } + break; + case 0x0010: + if (tmp_bus == dev->bus) { + /* Device is located directy after second bridge */ + /* Secondary bus of second bridge */ + switch (devpin) { + case DEVPIN(0, 1): /* DB#0 */ + case DEVPIN(0, 2): + case DEVPIN(0, 3): + case DEVPIN(0, 4): + return IRQ_IXDP2351_SPCI_DB_0; + case DEVPIN(1, 1): /* DB#1 */ + case DEVPIN(1, 2): + case DEVPIN(1, 3): + case DEVPIN(1, 4): + return IRQ_IXDP2351_SPCI_DB_1; + case DEVPIN(2, 1): /* FIC1 */ + case DEVPIN(2, 2): + case DEVPIN(2, 3): + case DEVPIN(2, 4): + case DEVPIN(3, 1): /* FIC2 */ + case DEVPIN(3, 2): + case DEVPIN(3, 3): + case DEVPIN(3, 4): + return IRQ_IXDP2351_SPCI_FIC; + } + } else { + /* Device is located indirectly after second bridge */ + /* Not supported now */ + return -1; + } + break; + } + + return -1; +} + +struct hw_pci ixdp2351_pci __initdata = { + .nr_controllers = 1, + .preinit = ixp23xx_pci_preinit, + .setup = ixp23xx_pci_setup, + .scan = ixp23xx_pci_scan_bus, + .map_irq = ixdp2351_map_irq, +}; + +int __init ixdp2351_pci_init(void) +{ + if (machine_is_ixdp2351()) + pci_common_init(&ixdp2351_pci); + + return 0; +} + +subsys_initcall(ixdp2351_pci_init); + +/* + * IXDP2351 Static Mapped I/O + */ +static struct map_desc ixdp2351_io_desc[] __initdata = { + { + .virtual = IXDP2351_NP_VIRT_BASE, + .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE), + .length = IXDP2351_NP_PHYS_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXDP2351_BB_BASE_VIRT, + .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS), + .length = IXDP2351_BB_SIZE, + .type = MT_DEVICE + } +}; + +static void __init ixdp2351_map_io(void) +{ + ixp23xx_map_io(); + iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc)); +} + +static void __init ixdp2351_init(void) +{ + physmap_configure(0x90000000, 0x04000000, 1, NULL); + + /* + * Mark flash as writeable + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixdp2351_map_io, + .init_irq = ixdp2351_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = ixdp2351_init, +MACHINE_END diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c new file mode 100644 index 00000000000..5330ad78c1b --- /dev/null +++ b/arch/arm/mach-ixp23xx/pci.c @@ -0,0 +1,275 @@ +/* + * arch/arm/mach-ixp23xx/pci.c + * + * PCI routines for IXP23XX based systems + * + * Copyright (c) 2005 MontaVista Software, Inc. + * + * based on original code: + * + * Author: Naeem Afzal <naeem.m.afzal@intel.com> + * Copyright 2002-2005 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/sizes.h> +#include <asm/system.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> + +extern int (*external_fault) (unsigned long, struct pt_regs *); + +static int pci_master_aborts = 0; + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +int clear_master_aborts(void); + +static u32 +*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) +{ + u32 *paddress; + + /* + * Must be dword aligned + */ + where &= ~3; + + /* + * For top bus, generate type 0, else type 1 + */ + if (!bus_nr) { + if (PCI_SLOT(devfn) >= 8) + return 0; + + paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT + | (1 << (PCI_SLOT(devfn) + 16)) + | (PCI_FUNC(devfn) << 8) | where); + } else { + paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT + | (bus_nr << 16) + | (PCI_SLOT(devfn) << 11) + | (PCI_FUNC(devfn) << 8) | where); + } + + return paddress; +} + +/* + * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. + * 0 and 3 are not valid indexes... + */ +static u32 bytemask[] = { + /*0*/ 0, + /*1*/ 0xff, + /*2*/ 0xffff, + /*3*/ 0, + /*4*/ 0xffffffff, +}; + +static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + u32 n; + u32 *addr; + + n = where % 4; + + DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where, + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + + addr = ixp23xx_pci_config_addr(bus->number, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + pci_master_aborts = 0; + *value = (*addr >> (8*n)) & bytemask[size]; + if (pci_master_aborts) { + pci_master_aborts = 0; + *value = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * We don't do error checking on the address for writes. + * It's assumed that the user checked for the device existing first + * by doing a read first. + */ +static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + u32 mask; + u32 *addr; + u32 temp; + + mask = ~(bytemask[size] << ((where % 0x4) * 8)); + addr = ixp23xx_pci_config_addr(bus->number, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + temp = (u32) (value) << ((where % 0x4) * 8); + *addr = (*addr & mask) | temp; + + clear_master_aborts(); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops ixp23xx_pci_ops = { + .read = ixp23xx_pci_read_config, + .write = ixp23xx_pci_write_config, +}; + +struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata) +{ + return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata); +} + +int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + volatile unsigned long temp; + unsigned long flags; + + pci_master_aborts = 1; + + local_irq_save(flags); + temp = *IXP23XX_PCI_CONTROL; + + /* + * master abort and cmd tgt err + */ + if (temp & ((1 << 8) | (1 << 5))) + *IXP23XX_PCI_CONTROL = temp; + + temp = *IXP23XX_PCI_CMDSTAT; + + if (temp & (1 << 29)) + *IXP23XX_PCI_CMDSTAT = temp; + local_irq_restore(flags); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +int clear_master_aborts(void) +{ + volatile u32 temp; + + temp = *IXP23XX_PCI_CONTROL; + + /* + * master abort and cmd tgt err + */ + if (temp & ((1 << 8) | (1 << 5))) + *IXP23XX_PCI_CONTROL = temp; + + temp = *IXP23XX_PCI_CMDSTAT; + + if (temp & (1 << 29)) + *IXP23XX_PCI_CMDSTAT = temp; + + return 0; +} + +void __init ixp23xx_pci_preinit(void) +{ +#ifdef __ARMEB__ + *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */ +#endif + /* + * ADDR_31 needs to be clear for PCI memory access to CPP memory + */ + *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31; + *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF; + + /* + * Select correct memory for PCI inbound transactions + */ + if (ixp23xx_cpp_boot()) { + *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1); + } else { + *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1); + } + + hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, + "PCI config cycle to non-existent device"); + + *IXP23XX_PCI_ADDR_EXT = 0x0000e000; +} + +/* + * Prevent PCI layer from seeing the inbound host-bridge resources + */ +static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev) +{ + int i; + + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx); + +/* + * IXP2300 systems often have large resource requirements, so we just + * use our own resource space. + */ +static struct resource ixp23xx_pci_mem_space = { + .start = IXP23XX_PCI_MEM_START, + .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + .name = "PCI Mem Space" +}; + +static struct resource ixp23xx_pci_io_space = { + .start = 0x00000100, + .end = 0x01ffffff, + .flags = IORESOURCE_IO, + .name = "PCI I/O Space" +}; + +int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) +{ + if (nr >= 1) + return 0; + + sys->resource[0] = &ixp23xx_pci_io_space; + sys->resource[1] = &ixp23xx_pci_mem_space; + sys->resource[2] = NULL; + + return 1; +} diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c new file mode 100644 index 00000000000..43c14e74079 --- /dev/null +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -0,0 +1,164 @@ +/* + * arch/arm/mach-ixp23xx/roadrunner.c + * + * RoadRunner board-specific routines + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/bitops.h> +#include <linux/ioport.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/pci.h> +#include <linux/mtd/physmap.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/tlbflush.h> +#include <asm/pgtable.h> + +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/pci.h> + +/* + * Interrupt mapping + */ +#define INTA IRQ_ROADRUNNER_PCI_INTA +#define INTB IRQ_ROADRUNNER_PCI_INTB +#define INTC IRQ_ROADRUNNER_PCI_INTC +#define INTD IRQ_ROADRUNNER_PCI_INTD + +#define INTC_PIN IXP23XX_GPIO_PIN_11 +#define INTD_PIN IXP23XX_GPIO_PIN_12 + +static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; + static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; + static int usb_irq[] = {INTB, INTC, INTD, -1}; + static int mini_pci_1_irq[] = {INTB, INTC, -1, -1}; + static int mini_pci_2_irq[] = {INTC, INTD, -1, -1}; + + switch(dev->bus->number) { + case 0: + switch(dev->devfn) { + case 0x0: // PCI-PCI bridge + break; + case 0x8: // PCI Card Slot + return pci_card_slot_irq[pin - 1]; + case 0x10: // PMC Slot + return pmc_card_slot_irq[pin - 1]; + case 0x18: // PMC Slot Secondary Agent + break; + case 0x20: // IXP Processor + break; + default: + return NO_IRQ; + } + break; + + case 1: + switch(dev->devfn) { + case 0x0: // IDE Controller + return (pin == 1) ? INTC : -1; + case 0x8: // USB fun 0 + case 0x9: // USB fun 1 + case 0xa: // USB fun 2 + return usb_irq[pin - 1]; + case 0x10: // Mini PCI 1 + return mini_pci_1_irq[pin-1]; + case 0x18: // Mini PCI 2 + return mini_pci_2_irq[pin-1]; + case 0x20: // MEM slot + return (pin == 1) ? INTA : -1; + default: + return NO_IRQ; + } + break; + + default: + return NO_IRQ; + } + + return NO_IRQ; +} + +static void roadrunner_pci_preinit(void) +{ + set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); + + ixp23xx_pci_preinit(); +} + +static struct hw_pci roadrunner_pci __initdata = { + .nr_controllers = 1, + .preinit = roadrunner_pci_preinit, + .setup = ixp23xx_pci_setup, + .scan = ixp23xx_pci_scan_bus, + .map_irq = roadrunner_map_irq, +}; + +static int __init roadrunner_pci_init(void) +{ + if (machine_is_roadrunner()) + pci_common_init(&roadrunner_pci); + + return 0; +}; + +subsys_initcall(roadrunner_pci_init); + +static void __init roadrunner_init(void) +{ + physmap_configure(0x90000000, 0x04000000, 2, NULL); + + /* + * Mark flash as writeable + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") + /* Maintainer: Deepak Saxena */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixp23xx_map_io, + .init_irq = ixp23xx_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = roadrunner_init, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index 60d5f8a3339..7520e602d7a 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -141,7 +141,7 @@ static int __init netstar_late_init(void) /* TODO: Setup front panel switch here */ /* Setup panic notifier */ - notifier_chain_register(&panic_notifier_list, &panic_block); + atomic_notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index bfd5fdd1a87..52e4a9d6964 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -235,7 +235,7 @@ static struct notifier_block panic_block = { static int __init voiceblue_setup(void) { /* Setup panic notifier */ - notifier_chain_register(&panic_notifier_list, &panic_block); + atomic_notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 24dd374224a..0884bc7c23b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -167,7 +167,7 @@ void __init omap_serial_init() static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index c1d77f5b382..0104fd142e7 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -10,6 +10,11 @@ config ARCH_LUBBOCK select PXA25x select SA1111 +config MACH_LOGICPD_PXA270 + bool "LogicPD PXA270 Card Engine Development Platform" + select PXA27x + select IWMMXT + config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform" select PXA27x diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 382644401a4..4e8a983e2b8 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o # Specific board support obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o +obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 9b48a90aefc..5efa84749f3 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -319,6 +319,11 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) pxaficp_device.dev.platform_data = info; } +static struct platform_device pxartc_device = { + .name = "sa1100-rtc", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { &pxamci_device, &udc_device, @@ -329,6 +334,7 @@ static struct platform_device *devices[] __initdata = { &pxaficp_device, &i2c_device, &i2s_device, + &pxartc_device, }; static int __init pxa_init(void) diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c new file mode 100644 index 00000000000..ec0f43a102c --- /dev/null +++ b/arch/arm/mach-pxa/lpd270.c @@ -0,0 +1,393 @@ +/* + * linux/arch/arm/mach-pxa/lpd270.c + * + * Support for the LogicPD PXA270 Card Engine. + * Derived from the mainstone code, which carries these notices: + * + * Author: Nicolas Pitre + * Created: Nov 05, 2002 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/bitops.h> +#include <linux/fb.h> +#include <linux/ioport.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/sizes.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/lpd270.h> +#include <asm/arch/audio.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/mmc.h> +#include <asm/arch/irda.h> +#include <asm/arch/ohci.h> + +#include "generic.h" + + +static unsigned int lpd270_irq_enabled; + +static void lpd270_mask_irq(unsigned int irq) +{ + int lpd270_irq = irq - LPD270_IRQ(0); + + __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS); + + lpd270_irq_enabled &= ~(1 << lpd270_irq); + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); +} + +static void lpd270_unmask_irq(unsigned int irq) +{ + int lpd270_irq = irq - LPD270_IRQ(0); + + lpd270_irq_enabled |= 1 << lpd270_irq; + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); +} + +static struct irqchip lpd270_irq_chip = { + .ack = lpd270_mask_irq, + .mask = lpd270_mask_irq, + .unmask = lpd270_unmask_irq, +}; + +static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned long pending; + + pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; + do { + GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ + if (likely(pending)) { + irq = LPD270_IRQ(0) + __ffs(pending); + desc = irq_desc + irq; + desc_handle_irq(irq, desc, regs); + + pending = __raw_readw(LPD270_INT_STATUS) & + lpd270_irq_enabled; + } + } while (pending); +} + +static void __init lpd270_init_irq(void) +{ + int irq; + + pxa_init_irq(); + + __raw_writew(0, LPD270_INT_MASK); + __raw_writew(0, LPD270_INT_STATUS); + + /* setup extra LogicPD PXA270 irqs */ + for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { + set_irq_chip(irq, &lpd270_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); + set_irq_type(IRQ_GPIO(0), IRQT_FALLING); +} + + +#ifdef CONFIG_PM +static int lpd270_irq_resume(struct sys_device *dev) +{ + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); + return 0; +} + +static struct sysdev_class lpd270_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = lpd270_irq_resume, +}; + +static struct sys_device lpd270_irq_device = { + .cls = &lpd270_irq_sysclass, +}; + +static int __init lpd270_irq_device_init(void) +{ + int ret = sysdev_class_register(&lpd270_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lpd270_irq_device); + return ret; +} + +device_initcall(lpd270_irq_device_init); +#endif + + +static struct resource smc91x_resources[] = { + [0] = { + .start = LPD270_ETH_PHYS, + .end = (LPD270_ETH_PHYS + 0xfffff), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = LPD270_ETHERNET_IRQ, + .end = LPD270_ETHERNET_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device lpd270_audio_device = { + .name = "pxa2xx-ac97", + .id = -1, +}; + +static struct resource lpd270_flash_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition lpd270_flash0_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000, + }, { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + }, +}; + +static struct flash_platform_data lpd270_flash_data[2] = { + { + .name = "processor-flash", + .map_name = "cfi_probe", + .parts = lpd270_flash0_partitions, + .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions), + }, { + .name = "mainboard-flash", + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device lpd270_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &lpd270_flash_data[0], + }, + .resource = &lpd270_flash_resources[0], + .num_resources = 1, + }, { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &lpd270_flash_data[1], + }, + .resource = &lpd270_flash_resources[1], + .num_resources = 1, + }, +}; + +static void lpd270_backlight_power(int on) +{ + if (on) { + pxa_gpio_mode(GPIO16_PWM0_MD); + pxa_set_cken(CKEN0_PWM0, 1); + PWM_CTRL0 = 0; + PWM_PWDUTY0 = 0x3ff; + PWM_PERVAL0 = 0x3ff; + } else { + PWM_CTRL0 = 0; + PWM_PWDUTY0 = 0x0; + PWM_PERVAL0 = 0x3FF; + pxa_set_cken(CKEN0_PWM0, 0); + } +} + +/* 5.7" TFT QVGA (LoLo display number 1) */ +static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = { + .pixclock = 100000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 64, + .left_margin = 0x27, + .right_margin = 0x09, + .vsync_len = 0x04, + .upper_margin = 0x08, + .lower_margin = 0x14, + .sync = 0, + .lccr0 = 0x07800080, + .lccr3 = 0x04400007, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +/* 6.4" TFT VGA (LoLo display number 5) */ +static struct pxafb_mach_info sharp_lq64d343 __initdata = { + .pixclock = 20000, + .xres = 640, + .yres = 480, + .bpp = 16, + .hsync_len = 49, + .left_margin = 0x89, + .right_margin = 0x19, + .vsync_len = 18, + .upper_margin = 0x22, + .lower_margin = 0, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .lccr0 = 0x07800080, + .lccr3 = 0x04400001, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +/* 3.5" TFT QVGA (LoLo display number 8) */ +static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = { + .pixclock = 100000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 0x34, + .left_margin = 0x09, + .right_margin = 0x09, + .vsync_len = 0x08, + .upper_margin = 0x05, + .lower_margin = 0x14, + .sync = 0, + .lccr0 = 0x07800080, + .lccr3 = 0x04400007, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +static struct platform_device *platform_devices[] __initdata = { + &smc91x_device, + &lpd270_audio_device, + &lpd270_flash_device[0], + &lpd270_flash_device[1], +}; + +static int lpd270_ohci_init(struct device *dev) +{ + /* setup Port1 GPIO pin. */ + pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ + pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ + + /* Set the Power Control Polarity Low and Power Sense + Polarity Low to active low. */ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static struct pxaohci_platform_data lpd270_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = lpd270_ohci_init, +}; + +static void __init lpd270_init(void) +{ + lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; + lpd270_flash_data[1].width = 4; + + /* + * System bus arbiter setting: + * - Core_Park + * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 + */ + ARB_CNTRL = ARB_CORE_PARK | 0x234; + + /* + * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45. + */ + pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + // set_pxa_fb_info(&sharp_lq057q3dc02); + set_pxa_fb_info(&sharp_lq64d343); + // set_pxa_fb_info(&sharp_lq035q7db02_20); + + pxa_set_ohci_info(&lpd270_ohci_platform_data); +} + + +static struct map_desc lpd270_io_desc[] __initdata = { + { + .virtual = LPD270_CPLD_VIRT, + .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), + .length = LPD270_CPLD_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init lpd270_map_io(void) +{ + pxa_map_io(); + iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc)); + + /* initialize sleep mode regs (wake-up sources, etc) */ + PGSR0 = 0x00008800; + PGSR1 = 0x00000002; + PGSR2 = 0x0001FC00; + PGSR3 = 0x00001F81; + PWER = 0xC0000002; + PRER = 0x00000002; + PFER = 0x00000002; + + /* for use I SRAM as framebuffer. */ + PSLR |= 0x00000F04; + PCFR = 0x00000066; +} + +MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") + /* Maintainer: Peter Barada */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = lpd270_map_io, + .init_irq = lpd270_init_irq, + .timer = &pxa_timer, + .init_machine = lpd270_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 30ec317bbb9..0dbb079ecd2 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -467,6 +467,8 @@ struct platform_device akitaioexp_device = { .id = -1, }; +EXPORT_SYMBOL_GPL(akitaioexp_device); + static void __init akita_init(void) { spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 6923316b3d0..cd67ab1b217 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -111,7 +111,7 @@ config SA1100_LART bool "LART" help Say Y here if you are using the Linux Advanced Radio Terminal - (also known as the LART). See <http://www.lart.tudelft.nl/> for + (also known as the LART). See <http://www.lartmaker.nl/> for information on the LART. config SA1100_PLEB diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index a599bb0d4ab..c58f12ba7a9 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -26,6 +26,7 @@ #include <asm/irq.h> #include <asm/setup.h> #include <asm/page.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 6888816a193..10245408247 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -40,6 +40,7 @@ #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> #include <asm/hardware/locomo.h> +#include <asm/arch/mcp.h> #include "generic.h" @@ -66,6 +67,32 @@ struct platform_device colliescoop_device = { .resource = collie_scoop_resources, }; +static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = { +{ + .dev = &colliescoop_device.dev, + .irq = COLLIE_IRQ_GPIO_CF_IRQ, + .cd_irq = COLLIE_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +}, +}; + +static struct scoop_pcmcia_config collie_pcmcia_config = { + .devs = &collie_pcmcia_scoop[0], + .num_devs = 1, +}; + + +static struct mcp_plat_data collie_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + + +static struct sa1100_port_fns collie_port_fns __initdata = { + .set_mctrl = collie_uart_set_mctrl, + .get_mctrl = collie_uart_get_mctrl, +}; + static struct resource locomo_resources[] = { [0] = { @@ -159,6 +186,8 @@ static void __init collie_init(void) GPDR |= GPIO_32_768kHz; TUCR = TUCR_32_768kHz; + platform_scoop_config = &collie_pcmcia_config; + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); @@ -166,6 +195,7 @@ static void __init collie_init(void) sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); + sa11x0_set_mcp_data(&collie_mcp_data); sharpsl_save_param(); } diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c new file mode 100644 index 00000000000..696d7d29c8a --- /dev/null +++ b/arch/arm/mach-sa1100/collie_pm.c @@ -0,0 +1,278 @@ +/* + * Based on spitz_pm.c and sharp code. + * + * Copyright (C) 2001 SHARP + * Copyright 2005 Pavel Machek <pavel@suse.cz> + * + * Distribute under GPLv2. + * + * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished, + * and sometimes charges them when it should not. If it makes angry lithium to come your way... + * ...well, you have been warned. + */ + +#include <linux/module.h> +#include <linux/stat.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/platform_device.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/hardware/scoop.h> +#include <asm/dma.h> +#include <asm/arch/collie.h> +#include <asm/mach/sharpsl_param.h> +#include <asm/hardware/sharpsl_pm.h> + +#include "../drivers/mfd/ucb1x00.h" + +static struct ucb1x00 *ucb; +static int ad_revise; + +#define ADCtoPower(x) ((330 * x * 2) / 1024) + +static void collie_charger_init(void) +{ + int err; + + if (sharpsl_param.adadj != -1) { + ad_revise = sharpsl_param.adadj; + } + + /* Register interrupt handler. */ + if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, SA_INTERRUPT, + "ACIN", sharpsl_ac_isr))) { + printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN); + return; + } + if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, SA_INTERRUPT, + "CO", sharpsl_chrg_full_isr))) { + free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr); + printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO); + return; + } + + ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON | + COLLIE_TC35143_GPIO_BBAT_ON); + return; +} + +static void collie_measure_temp(int on) +{ + if (on) + ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); + else + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); +} + +static void collie_charge(int on) +{ + if (on) { + printk("Should start charger\n"); + } else { + printk("Should stop charger\n"); + } +#ifdef I_AM_SURE + + /* Zaurus seems to contain LTC1731 ; it should know when to + * stop charging itself, so setting charge on should be + * relatively harmless (as long as it is not done too often). + */ +#define CF_BUF_CTRL_BASE 0xF0800000 +#define SCOOP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr))) +#define SCOOP_REG_GPWR SCOOP_REG(SCOOP_GPWR) + + if (on) { + set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); + } else { + reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); + } +#endif +} + +static void collie_discharge(int on) +{ +} + +static void collie_discharge1(int on) +{ +} + +static void collie_presuspend(void) +{ +} + +static void collie_postsuspend(void) +{ +} + +static int collie_should_wakeup(unsigned int resume_on_alarm) +{ + return 0; +} + +static unsigned long collie_charger_wakeup(void) +{ + return 0; +} + +int collie_read_backup_battery(void) +{ + int voltage; + + ucb1x00_adc_enable(ucb); + + /* Gives 75..130 */ + ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0); + voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); + + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); + ucb1x00_adc_disable(ucb); + + printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage); + + return ADCtoPower(voltage); +} + +int collie_read_main_battery(void) +{ + int voltage, voltage_rev, voltage_volts; + + ucb1x00_adc_enable(ucb); + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); + ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0); + /* gives values 160..255 with battery removed... and + 145..255 with battery inserted. (on AC), goes as low as + 80 on DC. */ + voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); + + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON); + ucb1x00_adc_disable(ucb); + + voltage_rev = voltage + ((ad_revise * voltage) / 652); + voltage_volts = ADCtoPower(voltage_rev); + + printk("Main battery = %d(%d)\n", voltage_volts, voltage); + + if (voltage != -1) + return voltage_volts; + else + return voltage; +} + +int collie_read_temp(void) +{ + int voltage; + + /* According to Sharp, temp must be > 973, main battery must be < 465, + FIXME: sharpsl_pm.c has both conditions negated? FIXME: values + are way out of range? */ + + ucb1x00_adc_enable(ucb); + ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); + /* >1010 = battery removed, 460 = 22C ?, higer = lower temp ? */ + voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC); + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); + ucb1x00_adc_disable(ucb); + + printk("Battery temp = %d\n", voltage); + return voltage; +} + +static unsigned long read_devdata(int which) +{ + switch (which) { + case SHARPSL_BATT_VOLT: + return collie_read_main_battery(); + case SHARPSL_BATT_TEMP: + return collie_read_temp(); + case SHARPSL_ACIN_VOLT: + return 0x1; + case SHARPSL_STATUS_ACIN: { + int ret = GPLR & COLLIE_GPIO_AC_IN; + printk("AC status = %d\n", ret); + return ret; + } + case SHARPSL_STATUS_FATAL: { + int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW; + printk("Fatal bat = %d\n", ret); + return ret; + } + default: + return ~0; + } +} + +struct battery_thresh collie_battery_levels[] = { + { 368, 100}, + { 358, 25}, + { 356, 5}, + { 0, 0}, +}; + +struct sharpsl_charger_machinfo collie_pm_machinfo = { + .init = collie_charger_init, + .read_devdata = read_devdata, + .discharge = collie_discharge, + .discharge1 = collie_discharge1, + .charge = collie_charge, + .measure_temp = collie_measure_temp, + .presuspend = collie_presuspend, + .postsuspend = collie_postsuspend, + .charger_wakeup = collie_charger_wakeup, + .should_wakeup = collie_should_wakeup, + .bat_levels = 3, + .bat_levels_noac = collie_battery_levels, + .bat_levels_acin = collie_battery_levels, + .status_high_acin = 368, + .status_low_acin = 358, + .status_high_noac = 368, + .status_low_noac = 358, +}; + +static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev) +{ + sharpsl_pm.machinfo = &collie_pm_machinfo; + ucb = pdev->ucb; + return 0; +} + +static struct ucb1x00_driver collie_pm_ucb_driver = { + .add = collie_pm_ucb_add, +}; + +static struct platform_device *collie_pm_device; + +static int __init collie_pm_init(void) +{ + int ret; + + collie_pm_device = platform_device_alloc("sharpsl-pm", -1); + if (!collie_pm_device) + return -ENOMEM; + + collie_pm_device->dev.platform_data = &collie_pm_machinfo; + ret = platform_device_add(collie_pm_device); + + if (ret) + platform_device_put(collie_pm_device); + + if (!ret) + ret = ucb1x00_register_driver(&collie_pm_ucb_driver); + + return ret; +} + +static void __exit collie_pm_exit(void) +{ + ucb1x00_unregister_driver(&collie_pm_ucb_driver); + platform_device_unregister(collie_pm_device); +} + +module_init(collie_pm_init); +module_exit(collie_pm_exit); diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 6435b2e48ff..d68630b74d7 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -11,7 +11,7 @@ * linux-2.4.5-rmk1 * * This software has been developed while working on the LART - * computing board (http://www.lart.tudelft.nl/), which is + * computing board (http://www.lartmaker.nl/), which is * sponsored by the Mobile Multi-media Communications * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications * (http://www.ubicom.tudelft.nl/) projects. diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 2abdc419e98..9ea71551fc0 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -324,6 +324,11 @@ void sa11x0_set_irda_data(struct irda_platform_data *irda) sa11x0ir_device.dev.platform_data = irda; } +static struct platform_device sa11x0rtc_device = { + .name = "sa1100-rtc", + .id = -1, +}; + static struct platform_device *sa11x0_devices[] __initdata = { &sa11x0udc_device, &sa11x0uart1_device, @@ -333,6 +338,7 @@ static struct platform_device *sa11x0_devices[] __initdata = { &sa11x0pcmcia_device, &sa11x0fb_device, &sa11x0mtd_device, + &sa11x0rtc_device, }; static int __init sa1100_init(void) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index eaaec90db97..c55b739e10b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -239,6 +239,17 @@ config CPU_XSCALE select CPU_CACHE_VIVT select CPU_TLB_V4WBI +# XScale Core Version 3 +config CPU_XSC3 + bool + depends on ARCH_IXP23XX + default y + select CPU_32v5 + select CPU_ABRT_EV5T + select CPU_CACHE_VIVT + select CPU_TLB_V4WBI + select IO_36 + # ARMv6 config CPU_V6 bool "Support ARM V6 processor" @@ -266,12 +277,18 @@ config CPU_32v6K # This defines the compiler instruction set which depends on the machine type. config CPU_32v3 bool + select TLS_REG_EMUL if SMP + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP config CPU_32v4 bool + select TLS_REG_EMUL if SMP + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP config CPU_32v5 bool + select TLS_REG_EMUL if SMP + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP config CPU_32v6 bool @@ -355,11 +372,17 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool +# +# CPU supports 36-bit I/O +# +config IO_36 + bool + comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6 + depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 default y help Say Y if you want to include kernel support for running user space @@ -417,7 +440,6 @@ config CPU_BPREDICT_DISABLE config TLS_REG_EMUL bool - default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) help An SMP system using a pre-ARMv6 processor (there are apparently a few prototypes like that in existence) and therefore access to @@ -436,7 +458,6 @@ config HAS_TLS_REG config NEEDS_SYSCALL_FOR_CMPXCHG bool - default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) help SMP on a pre-ARMv6 processor? Well OK then. Forget about fast user space cmpxchg support. diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index ffe73ba2bf1..07a53850578 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o +obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o @@ -51,4 +52,5 @@ obj-$(CONFIG_CPU_ARM1026) += proc-arm1026.o obj-$(CONFIG_CPU_SA110) += proc-sa110.o obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o +obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o obj-$(CONFIG_CPU_V6) += proc-v6.o diff --git a/arch/arm/mm/copypage-xsc3.S b/arch/arm/mm/copypage-xsc3.S new file mode 100644 index 00000000000..9a2cb4332b4 --- /dev/null +++ b/arch/arm/mm/copypage-xsc3.S @@ -0,0 +1,97 @@ +/* + * linux/arch/arm/lib/copypage-xsc3.S + * + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adapted for 3rd gen XScale core, no more mini-dcache + * Author: Matt Gilbert (matthew.m.gilbert@intel.com) + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/asm-offsets.h> + +/* + * General note: + * We don't really want write-allocate cache behaviour for these functions + * since that will just eat through 8K of the cache. + */ + + .text + .align 5 +/* + * XSC3 optimised copy_user_page + * r0 = destination + * r1 = source + * r2 = virtual user address of ultimate destination page + * + * The source page may have some clean entries in the cache already, but we + * can safely ignore them - break_cow() will flush them out of the cache + * if we eventually end up using our copied page. + * + */ +ENTRY(xsc3_mc_copy_user_page) + stmfd sp!, {r4, r5, lr} + mov lr, #PAGE_SZ/64-1 + + pld [r1, #0] + pld [r1, #32] +1: pld [r1, #64] + pld [r1, #96] + +2: ldrd r2, [r1], #8 + mov ip, r0 + ldrd r4, [r1], #8 + mcr p15, 0, ip, c7, c6, 1 @ invalidate + strd r2, [r0], #8 + ldrd r2, [r1], #8 + strd r4, [r0], #8 + ldrd r4, [r1], #8 + strd r2, [r0], #8 + strd r4, [r0], #8 + ldrd r2, [r1], #8 + mov ip, r0 + ldrd r4, [r1], #8 + mcr p15, 0, ip, c7, c6, 1 @ invalidate + strd r2, [r0], #8 + ldrd r2, [r1], #8 + subs lr, lr, #1 + strd r4, [r0], #8 + ldrd r4, [r1], #8 + strd r2, [r0], #8 + strd r4, [r0], #8 + bgt 1b + beq 2b + + ldmfd sp!, {r4, r5, pc} + + .align 5 +/* + * XScale optimised clear_user_page + * r0 = destination + * r1 = virtual user address of ultimate destination page + */ +ENTRY(xsc3_mc_clear_user_page) + mov r1, #PAGE_SZ/32 + mov r2, #0 + mov r3, #0 +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate line + strd r2, [r0], #8 + strd r2, [r0], #8 + strd r2, [r0], #8 + strd r2, [r0], #8 + subs r1, r1, #1 + bne 1b + mov pc, lr + + __INITDATA + + .type xsc3_mc_user_fns, #object +ENTRY(xsc3_mc_user_fns) + .long xsc3_mc_clear_user_page + .long xsc3_mc_copy_user_page + .size xsc3_mc_user_fns, . - xsc3_mc_user_fns diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index ef8d30a185a..5e5d05bcad5 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -557,7 +557,8 @@ void __init create_mapping(struct map_desc *md) * supersections are only allocated for domain 0 regardless * of the actual domain assignments in use. */ - if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) { + if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3()) + && domain == 0) { /* * Align to supersection boundary if !high pages. * High pages have already been checked for proper diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 3aa80094012..959588884fa 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -29,6 +29,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 767d158f211..be6d081ff2b 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -29,6 +29,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 6ca639094d6..f778545d57a 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -18,6 +18,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 10317e4f55d..148c111fde7 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -18,6 +18,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 8e7e1e70ab0..540359b475d 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -14,6 +14,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 471286fdf78..26f00ee2ad9 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -34,6 +34,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 950d3b664c1..a17f79e0199 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -28,6 +28,7 @@ #include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/page.h> diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 410b032faa3..bbde4a024a4 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -29,6 +29,7 @@ #include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/page.h> diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 6dd2be7cd05..224ce226a01 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -51,6 +51,7 @@ #include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/page.h> diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 022e8684204..4e2a087cf38 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -28,6 +28,7 @@ #include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/page.h> diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index bd330c4075a..c916a6cae40 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -18,6 +18,7 @@ #include <asm/asm-offsets.h> #include <asm/procinfo.h> #include <asm/hardware.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 91b89124c0d..41f21f2dd8f 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -23,6 +23,7 @@ #include <asm/asm-offsets.h> #include <asm/procinfo.h> #include <asm/hardware.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> /* diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 92f3ca31b7b..ee6f1529873 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -14,12 +14,21 @@ #include <asm/asm-offsets.h> #include <asm/hardware/arm_scu.h> #include <asm/procinfo.h> +#include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include "proc-macros.S" #define D_CACHE_LINE_SIZE 32 +#define TTB_C (1 << 0) +#define TTB_S (1 << 1) +#define TTB_IMP (1 << 2) +#define TTB_RGN_NC (0 << 3) +#define TTB_RGN_WBWA (1 << 3) +#define TTB_RGN_WT (2 << 3) +#define TTB_RGN_WB (3 << 3) + .macro cpsie, flags .ifc \flags, f .long 0xf1080040 @@ -114,7 +123,7 @@ ENTRY(cpu_v6_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id #ifdef CONFIG_SMP - orr r0, r0, #2 @ set shared pgtable + orr r0, r0, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable #endif mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer @@ -160,8 +169,8 @@ ENTRY(cpu_v6_set_pte) tst r1, #L_PTE_YOUNG biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK -@ tst r1, #L_PTE_EXEC -@ orreq r2, r2, #PTE_EXT_XN + tst r1, #L_PTE_EXEC + orreq r2, r2, #PTE_EXT_XN tst r1, #L_PTE_PRESENT moveq r2, #0 @@ -220,7 +229,7 @@ __v6_setup: mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register #ifdef CONFIG_SMP - orr r4, r4, #2 @ set shared pgtable + orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable #endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #ifdef CONFIG_VFP diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S new file mode 100644 index 00000000000..f90513e9af0 --- /dev/null +++ b/arch/arm/mm/proc-xsc3.S @@ -0,0 +1,498 @@ +/* + * linux/arch/arm/mm/proc-xsc3.S + * + * Original Author: Matthew Gilbert + * Current Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright 2004 (C) Intel Corp. + * Copyright 2005 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is an + * extension to Intel's original XScale core that adds the following + * features: + * + * - ARMv6 Supersections + * - Low Locality Reference pages (replaces mini-cache) + * - 36-bit addressing + * - L2 cache + * - Cache-coherency if chipset supports it + * + * Based on orignal XScale code by Nicolas Pitre + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/procinfo.h> +#include <asm/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/ptrace.h> +#include "proc-macros.S" + +/* + * This is the maximum size of an area which will be flushed. If the + * area is larger than this, then we flush the whole cache. + */ +#define MAX_AREA_SIZE 32768 + +/* + * The cache line size of the I and D cache. + */ +#define CACHELINESIZE 32 + +/* + * The size of the data cache. + */ +#define CACHESIZE 32768 + +/* + * Run with L2 enabled. + */ +#define L2_CACHE_ENABLE 1 + +/* + * Enable the Branch Target Buffer (can cause crashes, see erratum #42.) + */ +#define BTB_ENABLE 0 + +/* + * This macro is used to wait for a CP15 write and is needed + * when we have to ensure that the last operation to the co-pro + * was completed before continuing with operation. + */ + .macro cpwait_ret, lr, rd + mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 + sub pc, \lr, \rd, LSR #32 @ wait for completion and + @ flush instruction pipeline + .endm + +/* + * This macro cleans & invalidates the entire xsc3 dcache by set & way. + */ + + .macro clean_d_cache rd, rs + mov \rd, #0x1f00 + orr \rd, \rd, #0x00e0 +1: mcr p15, 0, \rd, c7, c14, 2 @ clean/inv set/way + adds \rd, \rd, #0x40000000 + bcc 1b + subs \rd, \rd, #0x20 + bpl 1b + .endm + + .text + +/* + * cpu_xsc3_proc_init() + * + * Nothing too exciting at the moment + */ +ENTRY(cpu_xsc3_proc_init) + mov pc, lr + +/* + * cpu_xsc3_proc_fin() + */ +ENTRY(cpu_xsc3_proc_fin) + str lr, [sp, #-4]! + mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r0 + bl xsc3_flush_kern_cache_all @ clean caches + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1800 @ ...IZ........... + bic r0, r0, #0x0006 @ .............CA. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldr pc, [sp], #4 + +/* + * cpu_xsc3_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_xsc3_reset) + mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r1 @ reset CPSR + mrc p15, 0, r1, c1, c0, 0 @ ctrl register + bic r1, r1, #0x0086 @ ........B....CA. + bic r1, r1, #0x3900 @ ..VIZ..S........ + mcr p15, 0, r1, c1, c0, 0 @ ctrl register + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB + bic r1, r1, #0x0001 @ ...............M + mcr p15, 0, r1, c1, c0, 0 @ ctrl register + @ CAUTION: MMU turned off from this point. We count on the pipeline + @ already containing those two last instructions to survive. + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mov pc, r0 + +/* + * cpu_xsc3_do_idle() + * + * Cause the processor to idle + * + * For now we do nothing but go to idle mode for every case + * + * XScale supports clock switching, but using idle mode support + * allows external hardware to react to system state changes. + + MMG: Come back to this one. + */ + .align 5 + +ENTRY(cpu_xsc3_do_idle) + mov r0, #1 + mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE + mov pc, lr + +/* ================================= CACHE ================================ */ + +/* + * flush_user_cache_all() + * + * Invalidate all cache entries in a particular address + * space. + */ +ENTRY(xsc3_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(xsc3_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: + clean_d_cache r0, r1 + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB + mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * flush_user_cache_range(start, end, vm_flags) + * + * Invalidate a range of cache entries in the specified + * address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - vma - vma_area_struct describing address space + */ + .align 5 +ENTRY(xsc3_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #MAX_AREA_SIZE + bhs __flush_whole_cache + +1: tst r2, #VM_EXEC + mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line + mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB + mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + * + * Note: single I-cache line invalidation isn't used here since + * it also trashes the mini I-cache used by JTAG debuggers. + */ +ENTRY(xsc3_coherent_kern_range) +/* FALLTHROUGH */ +ENTRY(xsc3_coherent_user_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(xsc3_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ Clean/Invalidate D Cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_inv_range) + tst r0, #CACHELINESIZE - 1 + bic r0, r0, #CACHELINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D entry + mcrne p15, 1, r0, c7, c11, 1 @ clean L2 D entry + tst r1, #CACHELINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D entry + mcrne p15, 1, r1, c7, c11, 1 @ clean L2 D entry +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D entry + mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_clean_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D entry + mcr p15, 1, r0, c7, c11, 1 @ clean L2 D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_flush_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate L1 D cache line + mcr p15, 1, r0, c7, c11, 1 @ Clean L2 D cache line + mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +ENTRY(xsc3_cache_fns) + .long xsc3_flush_kern_cache_all + .long xsc3_flush_user_cache_all + .long xsc3_flush_user_cache_range + .long xsc3_coherent_kern_range + .long xsc3_coherent_user_range + .long xsc3_flush_kern_dcache_page + .long xsc3_dma_inv_range + .long xsc3_dma_clean_range + .long xsc3_dma_flush_range + +ENTRY(cpu_xsc3_dcache_clean_area) +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + subs r1, r1, #CACHELINESIZE + bhi 1b + mov pc, lr + +/* =============================== PageTable ============================== */ + +/* + * cpu_xsc3_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 5 +ENTRY(cpu_xsc3_switch_mm) + clean_d_cache r1, r2 + mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush +#ifdef L2_CACHE_ENABLE + orr r0, r0, #0x18 @ cache the page table in L2 +#endif + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + cpwait_ret lr, ip + +/* + * cpu_xsc3_set_pte(ptep, pte) + * + * Set a PTE and flush it out + * + */ + .align 5 +ENTRY(cpu_xsc3_set_pte) + str r1, [r0], #-2048 @ linux version + + bic r2, r1, #0xff0 + orr r2, r2, #PTE_TYPE_EXT @ extended page + + eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + + tst r3, #L_PTE_USER @ User? + orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w + + tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w + @ combined with user -> user r/w + +#if L2_CACHE_ENABLE + @ If its cacheable it needs to be in L2 also. + eor ip, r1, #L_PTE_CACHEABLE + tst ip, #L_PTE_CACHEABLE + orreq r2, r2, #PTE_EXT_TEX(0x5) +#endif + + tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? + movne r2, #0 @ no -> fault + + str r2, [r0] @ hardware version + mov ip, #0 + mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line mcr + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + + .ltorg + + .align + + __INIT + + .type __xsc3_setup, #function +__xsc3_setup: + mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs +#if L2_CACHE_ENABLE + orr r4, r4, #0x18 @ cache the page table in L2 +#endif + mcr p15, 0, r4, c2, c0, 0 @ load page table pointer + mov r0, #1 @ Allow access to CP0 and CP13 + orr r0, r0, #1 << 13 @ Its undefined whether this + mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes + mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg + and r0, r0, #2 @ preserve bit P bit setting +#if L2_CACHE_ENABLE + orr r0, r0, #(1 << 10) @ enable L2 for LLR cache +#endif + mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg + mrc p15, 0, r0, c1, c0, 0 @ get control register + bic r0, r0, #0x0200 @ .... ..R. .... .... + bic r0, r0, #0x0002 @ .... .... .... ..A. + orr r0, r0, #0x0005 @ .... .... .... .C.M +#if BTB_ENABLE + orr r0, r0, #0x3900 @ ..VI Z..S .... .... +#else + orr r0, r0, #0x3100 @ ..VI ...S .... .... +#endif +#if L2_CACHE_ENABLE + orr r0, r0, #0x4000000 @ L2 enable +#endif + mov pc, lr + + .size __xsc3_setup, . - __xsc3_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + + .type xsc3_processor_functions, #object +ENTRY(xsc3_processor_functions) + .word v5t_early_abort + .word cpu_xsc3_proc_init + .word cpu_xsc3_proc_fin + .word cpu_xsc3_reset + .word cpu_xsc3_do_idle + .word cpu_xsc3_dcache_clean_area + .word cpu_xsc3_switch_mm + .word cpu_xsc3_set_pte + .size xsc3_processor_functions, . - xsc3_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_xsc3_name, #object +cpu_xsc3_name: + .asciz "XScale-Core3" + .size cpu_xsc3_name, . - cpu_xsc3_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __xsc3_proc_info,#object +__xsc3_proc_info: + .long 0x69056000 + .long 0xffffe000 + .long 0x00000c0e + b __xsc3_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_xsc3_name + .long xsc3_processor_functions + .long v4wbi_tlb_fns + .long xsc3_mc_user_fns + .long xsc3_cache_fns + .size __xsc3_proc_info, . - __xsc3_proc_info diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index b50f87a0ee7..29bcc4dd651 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -25,6 +25,7 @@ #include <asm/assembler.h> #include <asm/procinfo.h> #include <asm/pgtable.h> +#include <asm/pgtable-hwdef.h> #include <asm/page.h> #include <asm/ptrace.h> #include "proc-macros.S" diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 9ab1abfbe7a..7b595547c1c 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -18,6 +18,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/asm-offsets.h> +#include <asm/assembler.h> #include <asm/vfpmacros.h> .globl do_vfp diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index de4ca1223c5..b7ed57e00cd 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -102,7 +102,6 @@ vfp_support_entry: VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading @ nonexistant reg on rev0 VFPFSTMIA r4 @ save the working registers - add r4, r4, #8*16+4 stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @ start of the register dump @@ -111,10 +110,9 @@ no_old_VFP_process: DBGSTR1 "load state %p", r10 str r10, [r3] @ update the last_VFP_context pointer @ Load the saved state back into the VFP - add r4, r10, #8*16+4 - ldmia r4, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 VFPFLDMIA r10 @ reload the working registers while @ FPEXC is in a safe state + ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write? VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing @ nonexistant reg on rev0 diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig index dee23d87fc5..cf4ebf4c274 100644 --- a/arch/arm26/Kconfig +++ b/arch/arm26/Kconfig @@ -41,6 +41,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/arm26/Makefile b/arch/arm26/Makefile index 844a9e46886..fe91eda98a9 100644 --- a/arch/arm26/Makefile +++ b/arch/arm26/Makefile @@ -1,6 +1,9 @@ # # arch/arm26/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -49,9 +52,9 @@ all: zImage boot := arch/arm26/boot -.PHONY: maketools FORCE +PHONY += maketools FORCE maketools: FORCE - + # Convert bzImage to zImage bzImage: vmlinux diff --git a/arch/arm26/boot/Makefile b/arch/arm26/boot/Makefile index b5c2277654d..68acb7b0d47 100644 --- a/arch/arm26/boot/Makefile +++ b/arch/arm26/boot/Makefile @@ -1,6 +1,9 @@ # # arch/arm26/boot/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -60,7 +63,7 @@ $(obj)/xipImage: vmlinux FORCE @echo ' Kernel: $@ is ready' endif -.PHONY: initrd +PHONY += initrd initrd: @test "$(INITRD_PHYS)" != "" || \ (echo This machine does not support INITRD; exit -1) diff --git a/arch/arm26/kernel/traps.c b/arch/arm26/kernel/traps.c index 5847ea5d774..a79de041b50 100644 --- a/arch/arm26/kernel/traps.c +++ b/arch/arm26/kernel/traps.c @@ -34,7 +34,7 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <asm/unistd.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #include "ptrace.h" @@ -207,19 +207,19 @@ void die_if_kernel(const char *str, struct pt_regs *regs, int err) die(str, regs, err); } -static DECLARE_MUTEX(undef_sem); +static DEFINE_MUTEX(undef_mutex); static int (*undef_hook)(struct pt_regs *); int request_undef_hook(int (*fn)(struct pt_regs *)) { int ret = -EBUSY; - down(&undef_sem); + mutex_lock(&undef_mutex); if (undef_hook == NULL) { undef_hook = fn; ret = 0; } - up(&undef_sem); + mutex_unlock(&undef_mutex); return ret; } @@ -228,12 +228,12 @@ int release_undef_hook(int (*fn)(struct pt_regs *)) { int ret = -EINVAL; - down(&undef_sem); + mutex_lock(&undef_mutex); if (undef_hook == fn) { undef_hook = NULL; ret = 0; } - up(&undef_sem); + mutex_unlock(&undef_mutex); return ret; } diff --git a/arch/arm26/mm/init.c b/arch/arm26/mm/init.c index e3ecaa45374..7da8a520567 100644 --- a/arch/arm26/mm/init.c +++ b/arch/arm26/mm/init.c @@ -23,6 +23,7 @@ #include <linux/initrd.h> #include <linux/bootmem.h> #include <linux/blkdev.h> +#include <linux/pfn.h> #include <asm/segment.h> #include <asm/mach-types.h> @@ -101,12 +102,6 @@ struct node_info { int bootmap_pages; }; -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT) -#define PFN_SIZE(x) ((x) >> PAGE_SHIFT) -#define PFN_RANGE(s,e) PFN_SIZE(PAGE_ALIGN((unsigned long)(e)) - \ - (((unsigned long)(s)) & PAGE_MASK)) - /* * FIXME: We really want to avoid allocating the bootmap bitmap * over the top of the initrd. Hopefully, this is located towards diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index b8326194973..856b665020e 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -16,6 +16,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c index 1ba57efff60..619a6eefd89 100644 --- a/arch/cris/kernel/setup.c +++ b/arch/cris/kernel/setup.c @@ -18,6 +18,7 @@ #include <linux/seq_file.h> #include <linux/tty.h> #include <linux/utsname.h> +#include <linux/pfn.h> #include <asm/setup.h> @@ -88,10 +89,6 @@ setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - /* min_low_pfn points to the start of DRAM, start_pfn points * to the first DRAM pages after the kernel, and max_low_pfn * to the end of DRAM. diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index e0838371237..95a3892b8d1 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -17,6 +17,10 @@ config GENERIC_FIND_NEXT_BIT bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default n diff --git a/arch/frv/mm/mmu-context.c b/arch/frv/mm/mmu-context.c index f2c6866fc88..1530a4111e6 100644 --- a/arch/frv/mm/mmu-context.c +++ b/arch/frv/mm/mmu-context.c @@ -54,9 +54,9 @@ static unsigned get_cxn(mm_context_t *ctx) /* find the first unallocated context number * - 0 is reserved for the kernel */ - cxn = find_next_zero_bit(&cxn_bitmap, NR_CXN, 1); + cxn = find_next_zero_bit(cxn_bitmap, NR_CXN, 1); if (cxn < NR_CXN) { - set_bit(cxn, &cxn_bitmap); + set_bit(cxn, cxn_bitmap); } else { /* none remaining - need to steal someone else's cxn */ @@ -138,7 +138,7 @@ void destroy_context(struct mm_struct *mm) cxn_pinned = -1; list_del_init(&ctx->id_link); - clear_bit(ctx->id, &cxn_bitmap); + clear_bit(ctx->id, cxn_bitmap); __flush_tlb_mm(ctx->id); ctx->id = 0; } diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 98308b018a3..cabf0bfffc5 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -29,6 +29,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default n +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index bfea1bedcbf..f17bd1d2707 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -37,6 +37,10 @@ config GENERIC_IOMAP bool default y +config GENERIC_HWEIGHT + bool + default y + config ARCH_MAY_HAVE_PC_FDC bool default y @@ -227,6 +231,15 @@ config SCHED_SMT cost of slightly increased overhead in some places. If unsure say N here. +config SCHED_MC + bool "Multi-core scheduler support" + depends on SMP + default y + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + source "kernel/Kconfig.preempt" config X86_UP_APIC @@ -737,7 +750,7 @@ config PHYSICAL_START config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER + depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC ---help--- Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index 00108ba9a78..6e97df6979e 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -44,8 +44,8 @@ comment "Page alloc debug is incompatible with Software Suspend on i386" depends on DEBUG_KERNEL && SOFTWARE_SUSPEND config DEBUG_PAGEALLOC - bool "Page alloc debugging" - depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND + bool "Debug page memory allocations" + depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND && !HUGETLBFS help Unmap pages from the kernel linear mapping after free_pages(). This results in a large slowdown, but helps to find certain types diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 36bef6543ac..3e4adb1e224 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -39,6 +39,9 @@ include $(srctree)/arch/i386/Makefile.cpu cflags-$(CONFIG_REGPARM) += -mregparm=3 +# temporary until string.h is fixed +cflags-y += -ffreestanding + # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use # a lot more stack due to the lack of sharing of stacklots: CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) @@ -99,8 +102,8 @@ AFLAGS += $(mflags-y) boot := arch/i386/boot -.PHONY: zImage bzImage compressed zlilo bzlilo \ - zdisk bzdisk fdimage fdimage144 fdimage288 install +PHONY += zImage bzImage compressed zlilo bzlilo \ + zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install all: bzImage @@ -119,7 +122,7 @@ zlilo bzlilo: vmlinux zdisk bzdisk: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk -fdimage fdimage144 fdimage288: vmlinux +fdimage fdimage144 fdimage288 isoimage: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ install: @@ -136,6 +139,9 @@ define archhelp echo ' install to $$(INSTALL_PATH) and run lilo' echo ' bzdisk - Create a boot floppy in /dev/fd0' echo ' fdimage - Create a boot floppy image' + echo ' isoimage - Create a boot CD-ROM image' endef -CLEAN_FILES += arch/$(ARCH)/boot/fdimage arch/$(ARCH)/boot/mtools.conf +CLEAN_FILES += arch/$(ARCH)/boot/fdimage \ + arch/$(ARCH)/boot/image.iso \ + arch/$(ARCH)/boot/mtools.conf diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu index dcd936ef45d..a11befba26d 100644 --- a/arch/i386/Makefile.cpu +++ b/arch/i386/Makefile.cpu @@ -39,3 +39,7 @@ cflags-$(CONFIG_X86_ELAN) += -march=i486 # Geode GX1 support cflags-$(CONFIG_MGEODEGX1) += -march=pentium-mmx +# add at the end to overwrite eventual tuning options from earlier +# cpu entries +cflags-$(CONFIG_X86_GENERIC) += $(call tune,generic) + diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile index f136752563b..33e55476381 100644 --- a/arch/i386/boot/Makefile +++ b/arch/i386/boot/Makefile @@ -62,8 +62,12 @@ $(obj)/setup $(obj)/bootsect: %: %.o FORCE $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ -# Set this if you want to pass append arguments to the zdisk/fdimage kernel +# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel FDARGS = +# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel +FDINITRD = + +image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) $(obj)/mtools.conf: $(src)/mtools.conf.in sed -e 's|@OBJ@|$(obj)|g' < $< > $@ @@ -72,8 +76,11 @@ $(obj)/mtools.conf: $(src)/mtools.conf.in zdisk: $(BOOTIMAGE) $(obj)/mtools.conf MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync syslinux /dev/fd0 ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync # These require being root or having syslinux 2.02 or higher installed @@ -81,18 +88,39 @@ fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync syslinux $(obj)/fdimage ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync syslinux $(obj)/fdimage ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync +isoimage: $(BOOTIMAGE) + -rm -rf $(obj)/isoimage + mkdir $(obj)/isoimage + cp `echo /usr/lib*/syslinux/isolinux.bin | awk '{ print $1; }'` \ + $(obj)/isoimage + cp $(BOOTIMAGE) $(obj)/isoimage/linux + echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ + fi + mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \ + -no-emul-boot -boot-load-size 4 -boot-info-table \ + $(obj)/isoimage + rm -rf $(obj)/isoimage + zlilo: $(BOOTIMAGE) if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi diff --git a/arch/i386/boot/edd.S b/arch/i386/boot/edd.S index d8d69f2b911..4b84ea216f2 100644 --- a/arch/i386/boot/edd.S +++ b/arch/i386/boot/edd.S @@ -76,6 +76,8 @@ edd_mbr_sig_read: popw %es popw %bx jc edd_mbr_sig_done # on failure, we're done. + cmpb $0, %ah # some BIOSes do not set CF + jne edd_mbr_sig_done # on failure, we're done. movl (EDDBUF+EDD_MBR_SIG_OFFSET), %eax # read sig out of the MBR movl %eax, (%bx) # store success incb (EDD_MBR_SIG_NR_BUF) # note that we stored something diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S index 2ac40c8244c..0000a267453 100644 --- a/arch/i386/boot/video.S +++ b/arch/i386/boot/video.S @@ -1924,6 +1924,7 @@ skip10: movb %ah, %al ret store_edid: +#ifdef CONFIG_FB_FIRMWARE_EDID pushw %es # just save all registers pushw %ax pushw %bx @@ -1954,6 +1955,7 @@ store_edid: popw %bx popw %ax popw %es +#endif ret # VIDEO_SELECT-only variables diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index f1a21945963..033066176b3 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -668,10 +668,10 @@ unsigned long __init acpi_find_rsdp(void) unsigned long rsdp_phys = 0; if (efi_enabled) { - if (efi.acpi20) - return __pa(efi.acpi20); - else if (efi.acpi) - return __pa(efi.acpi); + if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) + return efi.acpi20; + else if (efi.acpi != EFI_INVALID_TABLE_ADDR) + return efi.acpi; } /* * Scan memory looking for the RSDP signature. First search EBDA (low diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 7e3d6b6a4e9..a06a49075f1 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -266,7 +266,7 @@ static void __init early_cpu_detect(void) void __cpuinit generic_identify(struct cpuinfo_x86 * c) { u32 tfms, xlvl; - int junk; + int ebx; if (have_cpuid_p()) { /* Get vendor name */ @@ -282,7 +282,7 @@ void __cpuinit generic_identify(struct cpuinfo_x86 * c) /* Intel-defined flags: level 0x00000001 */ if ( c->cpuid_level >= 0x00000001 ) { u32 capability, excap; - cpuid(0x00000001, &tfms, &junk, &excap, &capability); + cpuid(0x00000001, &tfms, &ebx, &excap, &capability); c->x86_capability[0] = capability; c->x86_capability[4] = excap; c->x86 = (tfms >> 8) & 15; @@ -292,6 +292,11 @@ void __cpuinit generic_identify(struct cpuinfo_x86 * c) if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xF) << 4; c->x86_mask = tfms & 15; +#ifdef CONFIG_SMP + c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); +#else + c->apicid = (ebx >> 24) & 0xFF; +#endif } else { /* Have CPUID level 0 only - unheard of */ c->x86 = 4; @@ -474,7 +479,6 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) cpuid(1, &eax, &ebx, &ecx, &edx); - c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index 26892d2099b..e44a4c6a4fe 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -96,7 +96,6 @@ config X86_POWERNOW_K8_ACPI config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on PCI help This add the CPUFreq driver for NatSemi Geode processors which support suspend modulation. @@ -115,9 +114,9 @@ config X86_SPEEDSTEP_CENTRINO you also need to say Y to "Use ACPI tables to decode..." below [which might imply enabling ACPI] if you want to use this driver on non-Banias CPUs. - + For details, take a look at <file:Documentation/cpu-freq/>. - + If in doubt, say N. config X86_SPEEDSTEP_CENTRINO_ACPI @@ -148,7 +147,7 @@ config X86_SPEEDSTEP_ICH help This adds the CPUFreq driver for certain mobile Intel Pentium III (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all - mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, + mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, ICH3 or ICH4 southbridge. For details, take a look at <file:Documentation/cpu-freq/>. @@ -161,7 +160,7 @@ config X86_SPEEDSTEP_SMI depends on EXPERIMENTAL help This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) + (Coppermine), all mobile Intel Pentium III-M (Tualatin) on systems which have an Intel 440BX/ZX/MX southbridge. For details, take a look at <file:Documentation/cpu-freq/>. @@ -203,9 +202,10 @@ config X86_LONGRUN config X86_LONGHAUL tristate "VIA Cyrix III Longhaul" select CPU_FREQ_TABLE + depends on BROKEN help - This adds the CPUFreq driver for VIA Samuel/CyrixIII, - VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T + This adds the CPUFreq driver for VIA Samuel/CyrixIII, + VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T processors. For details, take a look at <file:Documentation/cpu-freq/>. @@ -215,11 +215,11 @@ config X86_LONGHAUL comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" + bool "/proc/acpi/processor/../performance interface (deprecated)" depends on PROC_FS depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI help - This enables the deprecated /proc/acpi/processor/../performance + This enables the deprecated /proc/acpi/processor/../performance interface. While it is helpful for debugging, the generic, cross-architecture cpufreq interfaces should be used. @@ -233,9 +233,9 @@ config X86_SPEEDSTEP_RELAXED_CAP_CHECK bool "Relaxed speedstep capability checks" depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) help - Don't perform all checks for a speedstep capable system which would - normally be done. Some ancient or strange systems, though speedstep - capable, don't always indicate that they are speedstep capable. This + Don't perform all checks for a speedstep capable system which would + normally be done. Some ancient or strange systems, though speedstep + capable, don't always indicate that they are speedstep capable. This option lets the probing code bypass some of those checks if the parameter "relaxed_check=1" is passed to the module. diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c index 2b62dee35c6..f275e0d4aee 100644 --- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -39,7 +39,7 @@ static struct pci_dev *nforce2_chipset_dev; static int fid = 0; /* min_fsb, max_fsb: - * minimum and maximum FSB (= FSB at boot time) + * minimum and maximum FSB (= FSB at boot time) */ static int min_fsb = 0; static int max_fsb = 0; @@ -57,10 +57,10 @@ MODULE_PARM_DESC(min_fsb, #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) -/* +/** * nforce2_calc_fsb - calculate FSB * @pll: PLL value - * + * * Calculates FSB from PLL value */ static int nforce2_calc_fsb(int pll) @@ -76,10 +76,10 @@ static int nforce2_calc_fsb(int pll) return 0; } -/* +/** * nforce2_calc_pll - calculate PLL value * @fsb: FSB - * + * * Calculate PLL value for given FSB */ static int nforce2_calc_pll(unsigned int fsb) @@ -106,10 +106,10 @@ static int nforce2_calc_pll(unsigned int fsb) return NFORCE2_PLL(mul, div); } -/* +/** * nforce2_write_pll - write PLL value to chipset * @pll: PLL value - * + * * Writes new FSB PLL value to chipset */ static void nforce2_write_pll(int pll) @@ -121,15 +121,13 @@ static void nforce2_write_pll(int pll) pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp); /* Now write the value in all 64 registers */ - for (temp = 0; temp <= 0x3f; temp++) { - pci_write_config_dword(nforce2_chipset_dev, - NFORCE2_PLLREG, pll); - } + for (temp = 0; temp <= 0x3f; temp++) + pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll); return; } -/* +/** * nforce2_fsb_read - Read FSB * * Read FSB from chipset @@ -140,39 +138,32 @@ static unsigned int nforce2_fsb_read(int bootfsb) struct pci_dev *nforce2_sub5; u32 fsb, temp = 0; - /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); - + 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); if (!nforce2_sub5) return 0; pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); fsb /= 1000000; - + /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev, - NFORCE2_PLLENABLE, (u8 *)&temp); - + pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + if(bootfsb || !temp) return fsb; /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev, - NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; } -/* +/** * nforce2_set_fsb - set new FSB * @fsb: New FSB - * + * * Sets new FSB */ static int nforce2_set_fsb(unsigned int fsb) @@ -186,7 +177,7 @@ static int nforce2_set_fsb(unsigned int fsb) printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); return -EINVAL; } - + tfsb = nforce2_fsb_read(0); if (!tfsb) { printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); @@ -194,8 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb) } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev, - NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -223,7 +213,7 @@ static int nforce2_set_fsb(unsigned int fsb) /* Calculate the PLL reg. value */ if ((pll = nforce2_calc_pll(tfsb)) == -1) return -EINVAL; - + nforce2_write_pll(pll); #ifdef NFORCE2_DELAY mdelay(NFORCE2_DELAY); @@ -239,7 +229,7 @@ static int nforce2_set_fsb(unsigned int fsb) /** * nforce2_get - get the CPU frequency * @cpu: CPU number - * + * * Returns the CPU frequency */ static unsigned int nforce2_get(unsigned int cpu) @@ -354,10 +344,10 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, fid / 10, fid % 10); - + /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); - + if(!max_fsb) return -EIO; @@ -398,17 +388,15 @@ static struct cpufreq_driver nforce2_driver = { * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic * * Detects nForce2 A2 and C1 stepping - * + * */ static unsigned int nforce2_detect_chipset(void) { u8 revision; nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_NFORCE2, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); + PCI_DEVICE_ID_NVIDIA_NFORCE2, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (nforce2_chipset_dev == NULL) return -ENODEV; diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/i386/kernel/cpu/cpufreq/elanfreq.c index 3f7caa4ae6d..f317276afa7 100644 --- a/arch/i386/kernel/cpu/cpufreq/elanfreq.c +++ b/arch/i386/kernel/cpu/cpufreq/elanfreq.c @@ -1,16 +1,16 @@ /* - * elanfreq: cpufreq driver for the AMD ELAN family + * elanfreq: cpufreq driver for the AMD ELAN family * * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> * - * Parts of this code are (c) Sven Geggus <sven@geggus.net> + * Parts of this code are (c) Sven Geggus <sven@geggus.net> * - * All Rights Reserved. + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * 2 of the License, or (at your option) any later version. * * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel * @@ -28,7 +28,7 @@ #include <asm/timex.h> #include <asm/io.h> -#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ +#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ /* Module parameter */ @@ -41,7 +41,7 @@ struct s_elan_multiplier { }; /* - * It is important that the frequencies + * It is important that the frequencies * are listed in ascending order here! */ struct s_elan_multiplier elan_multiplier[] = { @@ -72,78 +72,79 @@ static struct cpufreq_frequency_table elanfreq_table[] = { * elanfreq_get_cpu_frequency: determine current cpu speed * * Finds out at which frequency the CPU of the Elan SOC runs - * at the moment. Frequencies from 1 to 33 MHz are generated + * at the moment. Frequencies from 1 to 33 MHz are generated * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" - * and have the rest of the chip running with 33 MHz. + * and have the rest of the chip running with 33 MHz. */ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) { - u8 clockspeed_reg; /* Clock Speed Register */ - + u8 clockspeed_reg; /* Clock Speed Register */ + local_irq_disable(); - outb_p(0x80,REG_CSCIR); - clockspeed_reg = inb_p(REG_CSCDR); + outb_p(0x80,REG_CSCIR); + clockspeed_reg = inb_p(REG_CSCDR); local_irq_enable(); - if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; } + if ((clockspeed_reg & 0xE0) == 0xE0) + return 0; - /* Are we in CPU clock multiplied mode (66/99 MHz)? */ - if ((clockspeed_reg & 0xE0) == 0xC0) { - if ((clockspeed_reg & 0x01) == 0) { + /* Are we in CPU clock multiplied mode (66/99 MHz)? */ + if ((clockspeed_reg & 0xE0) == 0xC0) { + if ((clockspeed_reg & 0x01) == 0) return 66000; - } else { - return 99000; - } - } + else + return 99000; + } /* 33 MHz is not 32 MHz... */ if ((clockspeed_reg & 0xE0)==0xA0) return 33000; - return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); + return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); } /** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number + * elanfreq_set_cpu_frequency: Change the CPU core frequency + * @cpu: cpu number * @freq: frequency in kHz * - * This function takes a frequency value and changes the CPU frequency + * This function takes a frequency value and changes the CPU frequency * according to this. Note that the frequency has to be checked by * elanfreq_validatespeed() for correctness! - * - * There is no return value. + * + * There is no return value. */ -static void elanfreq_set_cpu_state (unsigned int state) { - +static void elanfreq_set_cpu_state (unsigned int state) +{ struct cpufreq_freqs freqs; freqs.old = elanfreq_get_cpu_frequency(0); freqs.new = elan_multiplier[state].clock; freqs.cpu = 0; /* elanfreq.c is UP only driver */ - + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock); + printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n", + elan_multiplier[state].clock); - /* - * Access to the Elan's internal registers is indexed via - * 0x22: Chip Setup & Control Register Index Register (CSCI) - * 0x23: Chip Setup & Control Register Data Register (CSCD) + /* + * Access to the Elan's internal registers is indexed via + * 0x22: Chip Setup & Control Register Index Register (CSCI) + * 0x23: Chip Setup & Control Register Data Register (CSCD) * */ - /* - * 0x40 is the Power Management Unit's Force Mode Register. + /* + * 0x40 is the Power Management Unit's Force Mode Register. * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) */ local_irq_disable(); - outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ outb_p(0x00,REG_CSCDR); local_irq_enable(); /* wait till internal pipelines and */ udelay(1000); /* buffers have cleaned up */ @@ -166,10 +167,10 @@ static void elanfreq_set_cpu_state (unsigned int state) { /** * elanfreq_validatespeed: test if frequency range is valid - * @policy: the policy to validate + * @policy: the policy to validate * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. */ static int elanfreq_verify (struct cpufreq_policy *policy) @@ -177,11 +178,11 @@ static int elanfreq_verify (struct cpufreq_policy *policy) return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); } -static int elanfreq_target (struct cpufreq_policy *policy, - unsigned int target_freq, +static int elanfreq_target (struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0; if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate)) return -EINVAL; @@ -212,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) max_freq = elanfreq_get_cpu_frequency(0); /* table init */ - for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { if (elanfreq_table[i].frequency > max_freq) elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; } @@ -226,8 +227,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) if (result) return (result); - cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); - + cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); return 0; } @@ -268,9 +268,9 @@ static struct freq_attr* elanfreq_attr[] = { static struct cpufreq_driver elanfreq_driver = { - .get = elanfreq_get_cpu_frequency, - .verify = elanfreq_verify, - .target = elanfreq_target, + .get = elanfreq_get_cpu_frequency, + .verify = elanfreq_verify, + .target = elanfreq_target, .init = elanfreq_cpu_init, .exit = elanfreq_cpu_exit, .name = "elanfreq", @@ -279,23 +279,21 @@ static struct cpufreq_driver elanfreq_driver = { }; -static int __init elanfreq_init(void) -{ +static int __init elanfreq_init(void) +{ struct cpuinfo_x86 *c = cpu_data; /* Test if we have the right hardware */ if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) - { + (c->x86 != 4) || (c->x86_model!=10)) { printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); return -ENODEV; } - return cpufreq_register_driver(&elanfreq_driver); } -static void __exit elanfreq_exit(void) +static void __exit elanfreq_exit(void) { cpufreq_unregister_driver(&elanfreq_driver); } @@ -309,4 +307,3 @@ MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); module_init(elanfreq_init); module_exit(elanfreq_exit); - diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c index e86ea486c31..92afa3bc84f 100644 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c @@ -6,12 +6,12 @@ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation + * version 2 as published by the Free Software Foundation * * The author(s) of this software shall not be held liable for damages * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. - * + * * Theoritical note: * * (see Geode(tm) CS5530 manual (rev.4.1) page.56) @@ -21,18 +21,18 @@ * * Suspend Modulation works by asserting and de-asserting the SUSP# pin * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# - * the CPU enters an idle state. GX1 stops its core clock when SUSP# is + * the CPU enters an idle state. GX1 stops its core clock when SUSP# is * asserted then power consumption is reduced. * - * Suspend Modulation's OFF/ON duration are configurable + * Suspend Modulation's OFF/ON duration are configurable * with 'Suspend Modulation OFF Count Register' * and 'Suspend Modulation ON Count Register'. - * These registers are 8bit counters that represent the number of + * These registers are 8bit counters that represent the number of * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) * to the processor. * - * These counters define a ratio which is the effective frequency - * of operation of the system. + * These counters define a ratio which is the effective frequency + * of operation of the system. * * OFF Count * F_eff = Fgx * ---------------------- @@ -40,24 +40,24 @@ * * 0 <= On Count, Off Count <= 255 * - * From these limits, we can get register values + * From these limits, we can get register values * * off_duration + on_duration <= MAX_DURATION * on_duration = off_duration * (stock_freq - freq) / freq * - * off_duration = (freq * DURATION) / stock_freq - * on_duration = DURATION - off_duration + * off_duration = (freq * DURATION) / stock_freq + * on_duration = DURATION - off_duration * * *--------------------------------------------------------------------------- * * ChangeLog: - * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> - * - fix on/off register mistake - * - fix cpu_khz calc when it stops cpu modulation. + * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> + * - fix on/off register mistake + * - fix cpu_khz calc when it stops cpu modulation. * - * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> - * - rewrite for Cyrix MediaGX Cx5510/5520 and + * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> + * - rewrite for Cyrix MediaGX Cx5510/5520 and * NatSemi Geode Cs5530(A). * * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> @@ -74,40 +74,40 @@ ************************************************************************/ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/smp.h> #include <linux/cpufreq.h> #include <linux/pci.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/errno.h> /* PCI config registers, all at F0 */ -#define PCI_PMER1 0x80 /* power management enable register 1 */ -#define PCI_PMER2 0x81 /* power management enable register 2 */ -#define PCI_PMER3 0x82 /* power management enable register 3 */ -#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ -#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ -#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ -#define PCI_MODON 0x95 /* suspend modulation ON counter register */ -#define PCI_SUSCFG 0x96 /* suspend configuration register */ +#define PCI_PMER1 0x80 /* power management enable register 1 */ +#define PCI_PMER2 0x81 /* power management enable register 2 */ +#define PCI_PMER3 0x82 /* power management enable register 3 */ +#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ +#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ +#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ +#define PCI_MODON 0x95 /* suspend modulation ON counter register */ +#define PCI_SUSCFG 0x96 /* suspend configuration register */ /* PMER1 bits */ -#define GPM (1<<0) /* global power management */ -#define GIT (1<<1) /* globally enable PM device idle timers */ -#define GTR (1<<2) /* globally enable IO traps */ -#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ -#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ +#define GPM (1<<0) /* global power management */ +#define GIT (1<<1) /* globally enable PM device idle timers */ +#define GTR (1<<2) /* globally enable IO traps */ +#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ +#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ /* SUSCFG bits */ -#define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ -#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ - /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ -#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the belows support only with cs5530A */ -#define PWRSVE_ISA (1<<3) /* stop ISA clock */ -#define PWRSVE (1<<4) /* active idle */ +#define SUSMOD (1<<0) /* enable/disable suspend modulation */ +/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ +#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ + /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ +#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ +/* the belows support only with cs5530A */ +#define PWRSVE_ISA (1<<3) /* stop ISA clock */ +#define PWRSVE (1<<4) /* active idle */ struct gxfreq_params { u8 on_duration; @@ -128,7 +128,7 @@ module_param (pci_busclk, int, 0444); /* maximum duration for which the cpu may be suspended * (32us * MAX_DURATION). If no parameter is given, this defaults - * to 255. + * to 255. * Note that this leads to a maximum of 8 ms(!) where the CPU clock * is suspended -- processing power is just 0.39% of what it used to be, * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ @@ -144,17 +144,17 @@ module_param (max_duration, int, 0444); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) /** - * we can detect a core multipiler from dir0_lsb - * from GX1 datasheet p.56, - * MULT[3:0]: - * 0000 = SYSCLK multiplied by 4 (test only) - * 0001 = SYSCLK multiplied by 10 - * 0010 = SYSCLK multiplied by 4 - * 0011 = SYSCLK multiplied by 6 - * 0100 = SYSCLK multiplied by 9 - * 0101 = SYSCLK multiplied by 5 - * 0110 = SYSCLK multiplied by 7 - * 0111 = SYSCLK multiplied by 8 + * we can detect a core multipiler from dir0_lsb + * from GX1 datasheet p.56, + * MULT[3:0]: + * 0000 = SYSCLK multiplied by 4 (test only) + * 0001 = SYSCLK multiplied by 10 + * 0010 = SYSCLK multiplied by 4 + * 0011 = SYSCLK multiplied by 6 + * 0100 = SYSCLK multiplied by 9 + * 0101 = SYSCLK multiplied by 5 + * 0110 = SYSCLK multiplied by 7 + * 0111 = SYSCLK multiplied by 8 * of 33.3MHz **/ static int gx_freq_mult[16] = { @@ -164,17 +164,17 @@ static int gx_freq_mult[16] = { /**************************************************************** - * Low Level chipset interface * + * Low Level chipset interface * ****************************************************************/ static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, - { 0, }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, + { 0, }, }; /** - * gx_detect_chipset: + * gx_detect_chipset: * **/ static __init struct pci_dev *gx_detect_chipset(void) @@ -182,17 +182,16 @@ static __init struct pci_dev *gx_detect_chipset(void) struct pci_dev *gx_pci = NULL; /* check if CPU is a MediaGX or a Geode. */ - if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && + if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { dprintk("error: no MediaGX/Geode processor found!\n"); - return NULL; + return NULL; } /* detect which companion chip is used */ while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) { - if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) return gx_pci; - } } dprintk("error: no supported chipset found!\n"); @@ -200,24 +199,24 @@ static __init struct pci_dev *gx_detect_chipset(void) } /** - * gx_get_cpuspeed: + * gx_get_cpuspeed: * * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. */ static unsigned int gx_get_cpuspeed(unsigned int cpu) { - if ((gx_params->pci_suscfg & SUSMOD) == 0) + if ((gx_params->pci_suscfg & SUSMOD) == 0) return stock_freq; - return (stock_freq * gx_params->off_duration) + return (stock_freq * gx_params->off_duration) / (gx_params->on_duration + gx_params->off_duration); } /** * gx_validate_speed: * determine current cpu speed - * -**/ + * + **/ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) { @@ -230,7 +229,7 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off *on_duration=0; for (i=max_duration; i>0; i--) { - tmp_off = ((khz * i) / stock_freq) & 0xff; + tmp_off = ((khz * i) / stock_freq) & 0xff; tmp_on = i - tmp_off; tmp_freq = (stock_freq * tmp_off) / i; /* if this relation is closer to khz, use this. If it's equal, @@ -247,18 +246,17 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off /** - * gx_set_cpuspeed: - * set cpu speed in khz. + * gx_set_cpuspeed: + * set cpu speed in khz. **/ static void gx_set_cpuspeed(unsigned int khz) { - u8 suscfg, pmer1; + u8 suscfg, pmer1; unsigned int new_khz; unsigned long flags; struct cpufreq_freqs freqs; - freqs.cpu = 0; freqs.old = gx_get_cpuspeed(0); @@ -303,18 +301,18 @@ static void gx_set_cpuspeed(unsigned int khz) pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); - pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); + pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); + pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); - local_irq_restore(flags); + local_irq_restore(flags); gx_params->pci_suscfg = suscfg; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", - gx_params->on_duration * 32, gx_params->off_duration * 32); - dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); + dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", + gx_params->on_duration * 32, gx_params->off_duration * 32); + dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); } /**************************************************************** @@ -322,10 +320,10 @@ static void gx_set_cpuspeed(unsigned int khz) ****************************************************************/ /* - * cpufreq_gx_verify: test if frequency range is valid + * cpufreq_gx_verify: test if frequency range is valid * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. */ static int cpufreq_gx_verify(struct cpufreq_policy *policy) @@ -333,8 +331,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) unsigned int tmp_freq = 0; u8 tmp1, tmp2; - if (!stock_freq || !policy) - return -EINVAL; + if (!stock_freq || !policy) + return -EINVAL; policy->cpu = 0; cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); @@ -342,14 +340,14 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) /* it needs to be assured that at least one supported frequency is * within policy->min and policy->max. If it is not, policy->max * needs to be increased until one freuqency is supported. - * policy->min may not be decreased, though. This way we guarantee a + * policy->min may not be decreased, though. This way we guarantee a * specific processing capacity. */ tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); - if (tmp_freq < policy->min) + if (tmp_freq < policy->min) tmp_freq += stock_freq / max_duration; policy->min = tmp_freq; - if (policy->min > policy->max) + if (policy->min > policy->max) policy->max = tmp_freq; tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); if (tmp_freq > policy->max) @@ -358,12 +356,12 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) if (policy->max < policy->min) policy->max = policy->min; cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); - + return 0; } /* - * cpufreq_gx_target: + * cpufreq_gx_target: * */ static int cpufreq_gx_target(struct cpufreq_policy *policy, @@ -373,8 +371,8 @@ static int cpufreq_gx_target(struct cpufreq_policy *policy, u8 tmp1, tmp2; unsigned int tmp_freq; - if (!stock_freq || !policy) - return -EINVAL; + if (!stock_freq || !policy) + return -EINVAL; policy->cpu = 0; @@ -431,7 +429,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) return 0; } -/* +/* * cpufreq_gx_init: * MediaGX/Geode GX initialize cpufreq driver */ @@ -452,7 +450,7 @@ static int __init cpufreq_gx_init(void) u32 class_rev; /* Test if we have the right hardware */ - if ((gx_pci = gx_detect_chipset()) == NULL) + if ((gx_pci = gx_detect_chipset()) == NULL) return -ENODEV; /* check whether module parameters are sane */ @@ -461,10 +459,9 @@ static int __init cpufreq_gx_init(void) dprintk("geode suspend modulation available.\n"); - params = kmalloc(sizeof(struct gxfreq_params), GFP_KERNEL); + params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL); if (params == NULL) return -ENOMEM; - memset(params, 0, sizeof(struct gxfreq_params)); params->cs55x0 = gx_pci; gx_params = params; @@ -478,7 +475,7 @@ static int __init cpufreq_gx_init(void) pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev); params->pci_rev = class_rev && 0xff; - if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { + if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { kfree(params); return ret; /* register error! */ } diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index 2a495c162ec..d3a95d77ee8 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -234,7 +234,7 @@ static int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ - + static int __initdata nehemiah_a_clock_ratio[32] = { 100, /* 0000 -> 10.0x */ 160, /* 0001 -> 16.0x */ @@ -446,7 +446,7 @@ static int __initdata nehemiah_c_eblcr[32] = { /* end of table */ }; -/* +/* * Voltage scales. Div/Mod by 1000 to get actual voltage. * Which scale to use depends on the VRM type in use. */ diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c index cc73a7ae34b..ab6504efd80 100644 --- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c @@ -14,7 +14,7 @@ * The author(s) of this software shall not be held liable for damages * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. - * + * * Date Errata Description * 20020525 N44, O17 12.5% or 25% DC causes lockup * @@ -22,7 +22,7 @@ #include <linux/config.h> #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/smp.h> #include <linux/cpufreq.h> @@ -30,7 +30,7 @@ #include <linux/cpumask.h> #include <linux/sched.h> /* current / set_cpus_allowed() */ -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/msr.h> #include <asm/timex.h> @@ -79,7 +79,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) } else { dprintk("CPU#%d setting duty cycle to %d%%\n", cpu, ((125 * newstate) / 10)); - /* bits 63 - 5 : reserved + /* bits 63 - 5 : reserved * bit 4 : enable/disable * bits 3-1 : duty cycle * bit 0 : reserved @@ -132,7 +132,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, } /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software - * Developer's Manual, Volume 3 + * Developer's Manual, Volume 3 */ cpus_allowed = current->cpus_allowed; @@ -206,7 +206,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D); } - + static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) { @@ -234,7 +234,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) dprintk("has errata -- disabling frequencies lower than 2ghz\n"); break; } - + /* get max frequency */ stock_freq = cpufreq_p4_get_frequency(c); if (!stock_freq) @@ -244,13 +244,13 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { if ((i<2) && (has_N44_O17_errata[policy->cpu])) p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; - else if (has_N60_errata[policy->cpu] && p4clockmod_table[i].frequency < 2000000) + else if (has_N60_errata[policy->cpu] && ((stock_freq * i)/8) < 2000000) p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; else p4clockmod_table[i].frequency = (stock_freq * i)/8; } cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); - + /* cpuinfo and default policy values */ policy->governor = CPUFREQ_DEFAULT_GOVERNOR; policy->cpuinfo.transition_latency = 1000000; /* assumed */ @@ -262,7 +262,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) { - cpufreq_frequency_table_put_attr(policy->cpu); + cpufreq_frequency_table_put_attr(policy->cpu); return 0; } @@ -298,7 +298,7 @@ static struct freq_attr* p4clockmod_attr[] = { }; static struct cpufreq_driver p4clockmod_driver = { - .verify = cpufreq_p4_verify, + .verify = cpufreq_p4_verify, .target = cpufreq_p4_target, .init = cpufreq_p4_cpu_init, .exit = cpufreq_p4_cpu_exit, @@ -310,12 +310,12 @@ static struct cpufreq_driver p4clockmod_driver = { static int __init cpufreq_p4_init(void) -{ +{ struct cpuinfo_x86 *c = cpu_data; int ret; /* - * THERM_CONTROL is architectural for IA32 now, so + * THERM_CONTROL is architectural for IA32 now, so * we can rely on the capability checks */ if (c->x86_vendor != X86_VENDOR_INTEL) diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c index 222f8cfe3c5..f89524051e4 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c @@ -8,7 +8,7 @@ */ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/ioport.h> @@ -50,7 +50,7 @@ static int powernow_k6_get_cpu_multiplier(void) { u64 invalue = 0; u32 msrval; - + msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ invalue=inl(POWERNOW_IOPORT + 0x8); @@ -81,7 +81,7 @@ static void powernow_k6_set_state (unsigned int best_i) freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); freqs.new = busfreq * clock_ratio[best_i].index; freqs.cpu = 0; /* powernow-k6.c is UP only driver */ - + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* we now need to transform best_i to the BVC format, see AMD#23446 */ @@ -152,7 +152,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) busfreq = cpu_khz / max_multiplier; /* table init */ - for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { if (clock_ratio[i].index > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else @@ -182,7 +182,7 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) powernow_k6_set_state(i); } cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return 0; } static unsigned int powernow_k6_get(unsigned int cpu) @@ -196,8 +196,8 @@ static struct freq_attr* powernow_k6_attr[] = { }; static struct cpufreq_driver powernow_k6_driver = { - .verify = powernow_k6_verify, - .target = powernow_k6_target, + .verify = powernow_k6_verify, + .target = powernow_k6_target, .init = powernow_k6_cpu_init, .exit = powernow_k6_cpu_exit, .get = powernow_k6_get, @@ -215,7 +215,7 @@ static struct cpufreq_driver powernow_k6_driver = { * on success. */ static int __init powernow_k6_init(void) -{ +{ struct cpuinfo_x86 *c = cpu_data; if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) || diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index edcd626001d..2bf4237cb94 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -199,8 +199,8 @@ static int get_ranges (unsigned char *pst) powernow_table[j].index |= (vid << 8); /* upper 8 bits */ dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, mobile_vid_table[vid]%1000); } @@ -368,8 +368,8 @@ static int powernow_acpi_init(void) } dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, mobile_vid_table[vid]%1000); @@ -460,7 +460,7 @@ static int powernow_decode_bios (int maxfid, int startvid) (maxfid==pst->maxfid) && (startvid==pst->startvid)) { dprintk ("PST:%d (@%p)\n", i, pst); - dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); ret = get_ranges ((char *) pst + sizeof (struct pst_s)); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 798da7c2b5d..712a26bd445 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -40,21 +40,22 @@ #ifdef CONFIG_X86_POWERNOW_K8_ACPI #include <linux/acpi.h> +#include <linux/mutex.h> #include <acpi/processor.h> #endif #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 1.60.0" +#define VERSION "version 1.60.1" #include "powernow-k8.h" /* serialize freq changes */ -static DECLARE_MUTEX(fidvid_sem); +static DEFINE_MUTEX(fidvid_mutex); static struct powernow_k8_data *powernow_data[NR_CPUS]; #ifndef CONFIG_SMP -static cpumask_t cpu_core_map[1]; +static cpumask_t cpu_core_map[1] = { CPU_MASK_ALL }; #endif /* Return a frequency in MHz, given an input fid */ @@ -83,11 +84,10 @@ static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid) */ static u32 convert_fid_to_vco_fid(u32 fid) { - if (fid < HI_FID_TABLE_BOTTOM) { + if (fid < HI_FID_TABLE_BOTTOM) return 8 + (2 * fid); - } else { + else return fid; - } } /* @@ -177,7 +177,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) if (i++ > 100) { printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n"); return 1; - } + } } while (query_current_values_with_pending_wait(data)); count_off_irt(data); @@ -474,8 +474,10 @@ static int check_supported_cpu(unsigned int cpu) goto out; eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + if ((eax & CPUID_XFAM) != CPUID_XFAM_K8) + goto out; + if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || - ((eax & CPUID_XFAM) != CPUID_XFAM_K8) || ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) { printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); goto out; @@ -780,9 +782,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) /* verify only 1 entry from the lo frequency table */ if (fid < HI_FID_TABLE_BOTTOM) { if (cntlofreq) { - /* if both entries are the same, ignore this - * one... - */ + /* if both entries are the same, ignore this one ... */ if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || (powernow_table[i].index != powernow_table[cntlofreq].index)) { printk(KERN_ERR PFX "Too many lo freq table entries\n"); @@ -854,7 +854,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in find_psb_table, vid are + * the cpufreq frequency table in find_psb_table, vid are * the upper 8 bits. */ @@ -909,7 +909,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi u32 checkvid = data->currvid; unsigned int newstate; int ret = -EIO; - int i; /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; @@ -945,23 +944,17 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) goto err_out; - down(&fidvid_sem); + mutex_lock(&fidvid_mutex); powernow_k8_acpi_pst_values(data, newstate); if (transition_frequency(data, newstate)) { printk(KERN_ERR PFX "transition frequency failed\n"); ret = 1; - up(&fidvid_sem); + mutex_unlock(&fidvid_mutex); goto err_out; } - - /* Update all the fid/vids of our siblings */ - for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { - powernow_data[i]->currvid = data->currvid; - powernow_data[i]->currfid = data->currfid; - } - up(&fidvid_sem); + mutex_unlock(&fidvid_mutex); pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -1048,7 +1041,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) pol->governor = CPUFREQ_DEFAULT_GOVERNOR; pol->cpus = cpu_core_map[pol->cpu]; - /* Take a crude guess here. + /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US) + (3 * (1 << data->irt) * 10)) * 1000; @@ -1070,9 +1063,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) printk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); - for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) powernow_data[i] = data; - } return 0; @@ -1103,10 +1095,15 @@ static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) static unsigned int powernowk8_get (unsigned int cpu) { - struct powernow_k8_data *data = powernow_data[cpu]; + struct powernow_k8_data *data; cpumask_t oldmask = current->cpus_allowed; unsigned int khz = 0; + data = powernow_data[first_cpu(cpu_core_map[cpu])]; + + if (!data) + return -EINVAL; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); if (smp_processor_id() != cpu) { printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index d0de37d58e9..79a7c5c87ed 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -63,7 +63,7 @@ struct powernow_k8_data { #define MSR_C_LO_VID_SHIFT 8 /* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff +#define MSR_C_HI_STP_GNT_TO 0x000fffff /* Field definitions within the FID VID Low Status MSR : */ #define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ @@ -123,7 +123,7 @@ struct powernow_k8_data { * Most values of interest are enocoded in a single field of the _PSS * entries: the "control" value. */ - + #define IRT_SHIFT 30 #define RVO_SHIFT 28 #define EXT_TYPE_SHIFT 27 @@ -182,10 +182,6 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); -#ifndef for_each_cpu_mask -#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++) -#endif - #ifdef CONFIG_SMP static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) { diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index c173c0fa117..b0ff9075708 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -479,15 +479,13 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) unsigned l, h; int ret; int i; - struct cpuinfo_x86 *c = &cpu_data[policy->cpu]; /* Only Intel makes Enhanced Speedstep-capable CPUs */ if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; - if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { + if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) centrino_driver.flags |= CPUFREQ_CONST_LOOPS; - } if (centrino_cpu_init_acpi(policy)) { if (policy->cpu != 0) diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c index 7c47005a180..4f46cac155c 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c @@ -9,7 +9,7 @@ */ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/cpufreq.h> @@ -36,8 +36,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor) /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ struct { unsigned int ratio; /* Frequency Multiplier (x10) */ - u8 bitmap; /* power on configuration bits - [27, 25:22] (in MSR 0x2a) */ + u8 bitmap; /* power on configuration bits + [27, 25:22] (in MSR 0x2a) */ } msr_decode_mult [] = { { 30, 0x01 }, { 35, 0x05 }, @@ -58,9 +58,9 @@ static unsigned int pentium3_get_frequency (unsigned int processor) /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ struct { - unsigned int value; /* Front Side Bus speed in MHz */ - u8 bitmap; /* power on configuration bits [18: 19] - (in MSR 0x2a) */ + unsigned int value; /* Front Side Bus speed in MHz */ + u8 bitmap; /* power on configuration bits [18: 19] + (in MSR 0x2a) */ } msr_decode_fsb [] = { { 66, 0x0 }, { 100, 0x2 }, @@ -68,8 +68,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor) { 0, 0xff} }; - u32 msr_lo, msr_tmp; - int i = 0, j = 0; + u32 msr_lo, msr_tmp; + int i = 0, j = 0; /* read MSR 0x2a - we only need the low 32 bits */ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); @@ -106,7 +106,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) static unsigned int pentiumM_get_frequency(void) { - u32 msr_lo, msr_tmp; + u32 msr_lo, msr_tmp; rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); @@ -134,7 +134,7 @@ static unsigned int pentium4_get_frequency(void) dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); - /* decode the FSB: see IA-32 Intel (C) Architecture Software + /* decode the FSB: see IA-32 Intel (C) Architecture Software * Developer's Manual, Volume 3: System Prgramming Guide, * revision #12 in Table B-1: MSRs in the Pentium 4 and * Intel Xeon Processors, on page B-4 and B-5. @@ -170,7 +170,7 @@ static unsigned int pentium4_get_frequency(void) return (fsb * mult); } - + unsigned int speedstep_get_processor_frequency(unsigned int processor) { switch (processor) { @@ -198,11 +198,11 @@ EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency); unsigned int speedstep_detect_processor (void) { struct cpuinfo_x86 *c = cpu_data; - u32 ebx, msr_lo, msr_hi; + u32 ebx, msr_lo, msr_hi; dprintk("x86: %x, model: %x\n", c->x86, c->x86_model); - if ((c->x86_vendor != X86_VENDOR_INTEL) || + if ((c->x86_vendor != X86_VENDOR_INTEL) || ((c->x86 != 6) && (c->x86 != 0xF))) return 0; @@ -218,15 +218,15 @@ unsigned int speedstep_detect_processor (void) dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); switch (c->x86_mask) { - case 4: + case 4: /* - * B-stepping [M-P4-M] + * B-stepping [M-P4-M] * sample has ebx = 0x0f, production has 0x0e. */ if ((ebx == 0x0e) || (ebx == 0x0f)) return SPEEDSTEP_PROCESSOR_P4M; break; - case 7: + case 7: /* * C-stepping [M-P4-M] * needs to have ebx=0x0e, else it's a celeron: @@ -253,7 +253,7 @@ unsigned int speedstep_detect_processor (void) * also, M-P4M HTs have ebx=0x8, too * For now, they are distinguished by the model_id string */ - if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) + if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) return SPEEDSTEP_PROCESSOR_P4M; break; default: @@ -264,8 +264,7 @@ unsigned int speedstep_detect_processor (void) switch (c->x86_model) { case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, - 0x06 for mobile PIII-M */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */ ebx = cpuid_ebx(0x00000001); dprintk("ebx is %x\n", ebx); @@ -275,9 +274,8 @@ unsigned int speedstep_detect_processor (void) return 0; /* So far all PIII-M processors support SpeedStep. See - * Intel's 24540640.pdf of June 2003 + * Intel's 24540640.pdf of June 2003 */ - return SPEEDSTEP_PROCESSOR_PIII_T; case 0x08: /* Intel PIII [Coppermine] */ @@ -399,7 +397,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, } } - out: +out: local_irq_restore(flags); return (ret); } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h index 6a727fd3a77..b735429c50b 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h @@ -14,7 +14,7 @@ #define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */ #define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ +#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ #define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */ /* the following processors are not speedstep-capable and are not auto-detected @@ -25,8 +25,8 @@ /* speedstep states -- only two of them */ -#define SPEEDSTEP_HIGH 0x00000000 -#define SPEEDSTEP_LOW 0x00000001 +#define SPEEDSTEP_HIGH 0x00000000 +#define SPEEDSTEP_LOW 0x00000001 /* detect a speedstep-capable processor */ @@ -36,13 +36,13 @@ extern unsigned int speedstep_detect_processor (void); extern unsigned int speedstep_get_processor_frequency(unsigned int processor); -/* detect the low and high speeds of the processor. The callback - * set_state"'s first argument is either SPEEDSTEP_HIGH or - * SPEEDSTEP_LOW; the second argument is zero so that no +/* detect the low and high speeds of the processor. The callback + * set_state"'s first argument is either SPEEDSTEP_HIGH or + * SPEEDSTEP_LOW; the second argument is zero so that no * cpufreq_notify_transition calls are initiated. */ extern unsigned int speedstep_get_freqs(unsigned int processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)); + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)); diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index 28cc5d524af..c28333d5364 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -13,8 +13,8 @@ *********************************************************************/ #include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> +#include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/pci.h> @@ -28,21 +28,21 @@ * * These parameters are got from IST-SMI BIOS call. * If user gives it, these are used. - * + * */ -static int smi_port = 0; -static int smi_cmd = 0; -static unsigned int smi_sig = 0; +static int smi_port = 0; +static int smi_cmd = 0; +static unsigned int smi_sig = 0; /* info about the processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor = 0; -/* - * There are only two frequency states for each processor. Values +/* + * There are only two frequency states for each processor. Values * are in kHz for the time being. */ static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, + {SPEEDSTEP_HIGH, 0}, {SPEEDSTEP_LOW, 0}, {0, CPUFREQ_TABLE_END}, }; @@ -75,7 +75,9 @@ static int speedstep_smi_ownership (void) __asm__ __volatile__( "out %%al, (%%dx)\n" : "=D" (result) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic) + : "a" (command), "b" (function), "c" (0), "d" (smi_port), + "D" (0), "S" (magic) + : "memory" ); dprintk("result is %x\n", result); @@ -123,7 +125,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) *low = low_mhz * 1000; return result; -} +} /** * speedstep_get_state - set the SpeedStep state @@ -204,7 +206,7 @@ static void speedstep_set_state (unsigned int state) * speedstep_target - set a new CPUFreq policy * @policy: new policy * @target_freq: new freq - * @relation: + * @relation: * * Sets a new CPUFreq policy/freq. */ @@ -283,7 +285,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) state = speedstep_get_state(); speed = speedstep_freqs[state].frequency; - dprintk("currently at %s speed setting - %i MHz\n", + dprintk("currently at %s speed setting - %i MHz\n", (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", (speed / 1000)); @@ -296,7 +298,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) if (result) return (result); - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); return 0; } @@ -332,8 +334,8 @@ static struct freq_attr* speedstep_attr[] = { static struct cpufreq_driver speedstep_driver = { .name = "speedstep-smi", - .verify = speedstep_verify, - .target = speedstep_target, + .verify = speedstep_verify, + .target = speedstep_target, .init = speedstep_cpu_init, .exit = speedstep_cpu_exit, .get = speedstep_get, @@ -370,13 +372,12 @@ static int __init speedstep_init(void) return -ENODEV; } - dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", + dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); - - /* Error if no IST-SMI BIOS or no PARM + /* Error if no IST-SMI BIOS or no PARM sig= 'ISGE' aka 'Intel Speedstep Gate E' */ - if ((ist_info.signature != 0x47534943) && ( + if ((ist_info.signature != 0x47534943) && ( (smi_port == 0) || (smi_cmd == 0))) return -ENODEV; @@ -386,17 +387,15 @@ static int __init speedstep_init(void) smi_sig = ist_info.signature; /* setup smi_port from MODLULE_PARM or BIOS */ - if ((smi_port > 0xff) || (smi_port < 0)) { + if ((smi_port > 0xff) || (smi_port < 0)) return -EINVAL; - } else if (smi_port == 0) { + else if (smi_port == 0) smi_port = ist_info.command & 0xff; - } - if ((smi_cmd > 0xff) || (smi_cmd < 0)) { + if ((smi_cmd > 0xff) || (smi_cmd < 0)) return -EINVAL; - } else if (smi_cmd == 0) { + else if (smi_cmd == 0) smi_cmd = (ist_info.command >> 16) & 0xff; - } return cpufreq_register_driver(&speedstep_driver); } diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index ce61921369e..9df87b03612 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -173,6 +173,10 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */ unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */ unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */ + unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb; +#ifdef CONFIG_SMP + unsigned int cpu = (c == &boot_cpu_data) ? 0 : (c - cpu_data); +#endif if (c->cpuid_level > 3) { static int is_initialized; @@ -205,9 +209,15 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) break; case 2: new_l2 = this_leaf.size/1024; + num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing; + index_msb = get_count_order(num_threads_sharing); + l2_id = c->apicid >> index_msb; break; case 3: new_l3 = this_leaf.size/1024; + num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing; + index_msb = get_count_order(num_threads_sharing); + l3_id = c->apicid >> index_msb; break; default: break; @@ -215,11 +225,19 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) } } } - if (c->cpuid_level > 1) { + /* + * Don't use cpuid2 if cpuid4 is supported. For P4, we use cpuid2 for + * trace cache + */ + if ((num_cache_leaves == 0 || c->x86 == 15) && c->cpuid_level > 1) { /* supports eax=2 call */ int i, j, n; int regs[4]; unsigned char *dp = (unsigned char *)regs; + int only_trace = 0; + + if (num_cache_leaves != 0 && c->x86 == 15) + only_trace = 1; /* Number of times to iterate */ n = cpuid_eax(2) & 0xFF; @@ -241,6 +259,8 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) while (cache_table[k].descriptor != 0) { if (cache_table[k].descriptor == des) { + if (only_trace && cache_table[k].cache_type != LVL_TRACE) + break; switch (cache_table[k].cache_type) { case LVL_1_INST: l1i += cache_table[k].size; @@ -266,34 +286,45 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) } } } + } - if (new_l1d) - l1d = new_l1d; + if (new_l1d) + l1d = new_l1d; - if (new_l1i) - l1i = new_l1i; + if (new_l1i) + l1i = new_l1i; - if (new_l2) - l2 = new_l2; + if (new_l2) { + l2 = new_l2; +#ifdef CONFIG_SMP + cpu_llc_id[cpu] = l2_id; +#endif + } - if (new_l3) - l3 = new_l3; + if (new_l3) { + l3 = new_l3; +#ifdef CONFIG_SMP + cpu_llc_id[cpu] = l3_id; +#endif + } - if ( trace ) - printk (KERN_INFO "CPU: Trace cache: %dK uops", trace); - else if ( l1i ) - printk (KERN_INFO "CPU: L1 I cache: %dK", l1i); - if ( l1d ) - printk(", L1 D cache: %dK\n", l1d); - else - printk("\n"); - if ( l2 ) - printk(KERN_INFO "CPU: L2 cache: %dK\n", l2); - if ( l3 ) - printk(KERN_INFO "CPU: L3 cache: %dK\n", l3); + if (trace) + printk (KERN_INFO "CPU: Trace cache: %dK uops", trace); + else if ( l1i ) + printk (KERN_INFO "CPU: L1 I cache: %dK", l1i); - c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d)); - } + if (l1d) + printk(", L1 D cache: %dK\n", l1d); + else + printk("\n"); + + if (l2) + printk(KERN_INFO "CPU: L2 cache: %dK\n", l2); + + if (l3) + printk(KERN_INFO "CPU: L3 cache: %dK\n", l3); + + c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d)); return l2; } diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index 3b4618bed70..fff90bda473 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -36,6 +36,7 @@ #include <linux/pci.h> #include <linux/smp.h> #include <linux/cpu.h> +#include <linux/mutex.h> #include <asm/mtrr.h> @@ -47,7 +48,7 @@ u32 num_var_ranges = 0; unsigned int *usage_table; -static DECLARE_MUTEX(mtrr_sem); +static DEFINE_MUTEX(mtrr_mutex); u32 size_or_mask, size_and_mask; @@ -333,7 +334,7 @@ int mtrr_add_page(unsigned long base, unsigned long size, /* No CPU hotplug when we change MTRR entries */ lock_cpu_hotplug(); /* Search for existing MTRR */ - down(&mtrr_sem); + mutex_lock(&mtrr_mutex); for (i = 0; i < num_var_ranges; ++i) { mtrr_if->get(i, &lbase, &lsize, <ype); if (base >= lbase + lsize) @@ -371,7 +372,7 @@ int mtrr_add_page(unsigned long base, unsigned long size, printk(KERN_INFO "mtrr: no more MTRRs available\n"); error = i; out: - up(&mtrr_sem); + mutex_unlock(&mtrr_mutex); unlock_cpu_hotplug(); return error; } @@ -464,7 +465,7 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) max = num_var_ranges; /* No CPU hotplug when we change MTRR entries */ lock_cpu_hotplug(); - down(&mtrr_sem); + mutex_lock(&mtrr_mutex); if (reg < 0) { /* Search for existing MTRR */ for (i = 0; i < max; ++i) { @@ -503,7 +504,7 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) set_mtrr(reg, 0, 0, 0); error = reg; out: - up(&mtrr_sem); + mutex_unlock(&mtrr_mutex); unlock_cpu_hotplug(); return error; } @@ -685,7 +686,7 @@ void mtrr_ap_init(void) if (!mtrr_if || !use_intel()) return; /* - * Ideally we should hold mtrr_sem here to avoid mtrr entries changed, + * Ideally we should hold mtrr_mutex here to avoid mtrr entries changed, * but this routine will be called in cpu boot time, holding the lock * breaks it. This routine is called in two cases: 1.very earily time * of software resume, when there absolutely isn't mtrr entry changes; diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 5cfbd801169..f94cdb7aca5 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -45,7 +45,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ - "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est", + "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index 6a93d75db43..5efceebc48d 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -3,8 +3,10 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/dmi.h> +#include <linux/efi.h> #include <linux/bootmem.h> #include <linux/slab.h> +#include <asm/dmi.h> static char * __init dmi_string(struct dmi_header *dm, u8 s) { @@ -106,7 +108,7 @@ static void __init dmi_save_devices(struct dmi_header *dm) struct dmi_device *dev; for (i = 0; i < count; i++) { - char *d = ((char *) dm) + (i * 2); + char *d = (char *)(dm + 1) + (i * 2); /* Skip disabled device */ if ((*d & 0x80) == 0) @@ -184,47 +186,72 @@ static void __init dmi_decode(struct dmi_header *dm) } } -void __init dmi_scan_machine(void) +static int __init dmi_present(char __iomem *p) { u8 buf[15]; - char __iomem *p, *q; + memcpy_fromio(buf, p, 15); + if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { + u16 num = (buf[13] << 8) | buf[12]; + u16 len = (buf[7] << 8) | buf[6]; + u32 base = (buf[11] << 24) | (buf[10] << 16) | + (buf[9] << 8) | buf[8]; - /* - * no iounmap() for that ioremap(); it would be a no-op, but it's - * so early in setup that sucker gets confused into doing what - * it shouldn't if we actually call it. - */ - p = ioremap(0xF0000, 0x10000); - if (p == NULL) - goto out; - - for (q = p; q < p + 0x10000; q += 16) { - memcpy_fromio(buf, q, 15); - if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { - u16 num = (buf[13] << 8) | buf[12]; - u16 len = (buf[7] << 8) | buf[6]; - u32 base = (buf[11] << 24) | (buf[10] << 16) | - (buf[9] << 8) | buf[8]; - - /* - * DMI version 0.0 means that the real version is taken from - * the SMBIOS version, which we don't know at this point. - */ - if (buf[14] != 0) - printk(KERN_INFO "DMI %d.%d present.\n", - buf[14] >> 4, buf[14] & 0xF); - else - printk(KERN_INFO "DMI present.\n"); + /* + * DMI version 0.0 means that the real version is taken from + * the SMBIOS version, which we don't know at this point. + */ + if (buf[14] != 0) + printk(KERN_INFO "DMI %d.%d present.\n", + buf[14] >> 4, buf[14] & 0xF); + else + printk(KERN_INFO "DMI present.\n"); + if (dmi_table(base,len, num, dmi_decode) == 0) + return 0; + } + return 1; +} + +void __init dmi_scan_machine(void) +{ + char __iomem *p, *q; + int rc; + + if (efi_enabled) { + if (efi.smbios == EFI_INVALID_TABLE_ADDR) + goto out; + + /* This is called as a core_initcall() because it isn't + * needed during early boot. This also means we can + * iounmap the space when we're done with it. + */ + p = dmi_ioremap(efi.smbios, 32); + if (p == NULL) + goto out; + + rc = dmi_present(p + 0x10); /* offset of _DMI_ string */ + dmi_iounmap(p, 32); + if (!rc) + return; + } + else { + /* + * no iounmap() for that ioremap(); it would be a no-op, but + * it's so early in setup that sucker gets confused into doing + * what it shouldn't if we actually call it. + */ + p = dmi_ioremap(0xF0000, 0x10000); + if (p == NULL) + goto out; - if (dmi_table(base,len, num, dmi_decode) == 0) + for (q = p; q < p + 0x10000; q += 16) { + rc = dmi_present(q); + if (!rc) return; } } - -out: printk(KERN_INFO "DMI not present or invalid.\n"); + out: printk(KERN_INFO "DMI not present or invalid.\n"); } - /** * dmi_check_system - check system DMI data * @list: array of dmi_system_id structures to match against @@ -299,3 +326,33 @@ struct dmi_device * dmi_find_device(int type, const char *name, return NULL; } EXPORT_SYMBOL(dmi_find_device); + +/** + * dmi_get_year - Return year of a DMI date + * @field: data index (like dmi_get_system_info) + * + * Returns -1 when the field doesn't exist. 0 when it is broken. + */ +int dmi_get_year(int field) +{ + int year; + char *s = dmi_get_system_info(field); + + if (!s) + return -1; + if (*s == '\0') + return 0; + s = strrchr(s, '/'); + if (!s) + return 0; + + s += 1; + year = simple_strtoul(s, NULL, 0); + if (year && year < 100) { /* 2-digit year */ + year += 1900; + if (year < 1996) /* no dates < spec 1.0 */ + year += 100; + } + + return year; +} diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index 7ec6cfa01fb..9202b67c4b2 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -361,7 +361,7 @@ void __init efi_init(void) */ c16 = (efi_char16_t *) boot_ioremap(efi.systab->fw_vendor, 2); if (c16) { - for (i = 0; i < sizeof(vendor) && *c16; ++i) + for (i = 0; i < (sizeof(vendor) - 1) && *c16; ++i) vendor[i] = *c16++; vendor[i] = '\0'; } else @@ -381,29 +381,38 @@ void __init efi_init(void) if (config_tables == NULL) printk(KERN_ERR PFX "Could not map EFI Configuration Table!\n"); + efi.mps = EFI_INVALID_TABLE_ADDR; + efi.acpi = EFI_INVALID_TABLE_ADDR; + efi.acpi20 = EFI_INVALID_TABLE_ADDR; + efi.smbios = EFI_INVALID_TABLE_ADDR; + efi.sal_systab = EFI_INVALID_TABLE_ADDR; + efi.boot_info = EFI_INVALID_TABLE_ADDR; + efi.hcdp = EFI_INVALID_TABLE_ADDR; + efi.uga = EFI_INVALID_TABLE_ADDR; + for (i = 0; i < num_config_tables; i++) { if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) { - efi.mps = (void *)config_tables[i].table; + efi.mps = config_tables[i].table; printk(KERN_INFO " MPS=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) { - efi.acpi20 = __va(config_tables[i].table); + efi.acpi20 = config_tables[i].table; printk(KERN_INFO " ACPI 2.0=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) { - efi.acpi = __va(config_tables[i].table); + efi.acpi = config_tables[i].table; printk(KERN_INFO " ACPI=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) { - efi.smbios = (void *) config_tables[i].table; + efi.smbios = config_tables[i].table; printk(KERN_INFO " SMBIOS=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) { - efi.hcdp = (void *)config_tables[i].table; + efi.hcdp = config_tables[i].table; printk(KERN_INFO " HCDP=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, UGA_IO_PROTOCOL_GUID) == 0) { - efi.uga = (void *)config_tables[i].table; + efi.uga = config_tables[i].table; printk(KERN_INFO " UGA=0x%lx ", config_tables[i].table); } } diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 311b4e7266f..3b329af4afc 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -381,7 +381,7 @@ static void do_irq_balance(void) unsigned long imbalance = 0; cpumask_t allowed_mask, target_cpu_mask, tmp; - for_each_cpu(i) { + for_each_possible_cpu(i) { int package_index; CPU_IRQ(i) = 0; if (!cpu_online(i)) @@ -632,7 +632,7 @@ static int __init balanced_irq_init(void) else printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); failed: - for_each_cpu(i) { + for_each_possible_cpu(i) { kfree(irq_cpu_data[i].irq_delta); irq_cpu_data[i].irq_delta = NULL; kfree(irq_cpu_data[i].last_irq); diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 7a59050242a..f19768789e8 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -35,12 +35,56 @@ #include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/desc.h> +#include <asm/uaccess.h> void jprobe_return_end(void); DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); +/* insert a jmp code */ +static inline void set_jmp_op(void *from, void *to) +{ + struct __arch_jmp_op { + char op; + long raddr; + } __attribute__((packed)) *jop; + jop = (struct __arch_jmp_op *)from; + jop->raddr = (long)(to) - ((long)(from) + 5); + jop->op = RELATIVEJUMP_INSTRUCTION; +} + +/* + * returns non-zero if opcodes can be boosted. + */ +static inline int can_boost(kprobe_opcode_t opcode) +{ + switch (opcode & 0xf0 ) { + case 0x70: + return 0; /* can't boost conditional jump */ + case 0x90: + /* can't boost call and pushf */ + return opcode != 0x9a && opcode != 0x9c; + case 0xc0: + /* can't boost undefined opcodes and soft-interruptions */ + return (0xc1 < opcode && opcode < 0xc6) || + (0xc7 < opcode && opcode < 0xcc) || opcode == 0xcf; + case 0xd0: + /* can boost AA* and XLAT */ + return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7); + case 0xe0: + /* can boost in/out and (may be) jmps */ + return (0xe3 < opcode && opcode != 0xe8); + case 0xf0: + /* clear and set flags can be boost */ + return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe)); + default: + /* currently, can't boost 2 bytes opcodes */ + return opcode != 0x0f; + } +} + + /* * returns non-zero if opcode modifies the interrupt flag. */ @@ -65,6 +109,11 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; + if (can_boost(p->opcode)) { + p->ainsn.boostable = 0; + } else { + p->ainsn.boostable = -1; + } return 0; } @@ -155,9 +204,13 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; - kprobe_opcode_t *addr = NULL; - unsigned long *lp; + kprobe_opcode_t *addr; struct kprobe_ctlblk *kcb; +#ifdef CONFIG_PREEMPT + unsigned pre_preempt_count = preempt_count(); +#endif /* CONFIG_PREEMPT */ + + addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t)); /* * We don't want to be preempted for the entire @@ -166,17 +219,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) preempt_disable(); kcb = get_kprobe_ctlblk(); - /* Check if the application is using LDT entry for its code segment and - * calculate the address by reading the base address from the LDT entry. - */ - if ((regs->xcs & 4) && (current->mm)) { - lp = (unsigned long *) ((unsigned long)((regs->xcs >> 3) * 8) - + (char *) current->mm->context.ldt); - addr = (kprobe_opcode_t *) (get_desc_base(lp) + regs->eip - - sizeof(kprobe_opcode_t)); - } else { - addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t)); - } /* Check we're not actually recursing */ if (kprobe_running()) { p = get_kprobe(addr); @@ -252,6 +294,21 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) /* handler has already set things up, so skip ss setup */ return 1; + if (p->ainsn.boostable == 1 && +#ifdef CONFIG_PREEMPT + !(pre_preempt_count) && /* + * This enables booster when the direct + * execution path aren't preempted. + */ +#endif /* CONFIG_PREEMPT */ + !p->post_handler && !p->break_handler ) { + /* Boost up -- we can execute copied instructions directly */ + reset_current_kprobe(); + regs->eip = (unsigned long)p->ainsn.insn; + preempt_enable_no_resched(); + return 1; + } + ss_probe: prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_HIT_SS; @@ -267,17 +324,44 @@ no_kprobe: * here. When a retprobed function returns, this probe is hit and * trampoline_probe_handler() runs, calling the kretprobe's handler. */ - void kretprobe_trampoline_holder(void) + void __kprobes kretprobe_trampoline_holder(void) { - asm volatile ( ".global kretprobe_trampoline\n" + asm volatile ( ".global kretprobe_trampoline\n" "kretprobe_trampoline: \n" - "nop\n"); - } + " pushf\n" + /* skip cs, eip, orig_eax, es, ds */ + " subl $20, %esp\n" + " pushl %eax\n" + " pushl %ebp\n" + " pushl %edi\n" + " pushl %esi\n" + " pushl %edx\n" + " pushl %ecx\n" + " pushl %ebx\n" + " movl %esp, %eax\n" + " call trampoline_handler\n" + /* move eflags to cs */ + " movl 48(%esp), %edx\n" + " movl %edx, 44(%esp)\n" + /* save true return address on eflags */ + " movl %eax, 48(%esp)\n" + " popl %ebx\n" + " popl %ecx\n" + " popl %edx\n" + " popl %esi\n" + " popl %edi\n" + " popl %ebp\n" + " popl %eax\n" + /* skip eip, orig_eax, es, ds */ + " addl $16, %esp\n" + " popf\n" + " ret\n"); +} /* - * Called when we hit the probe point at kretprobe_trampoline + * Called from kretprobe_trampoline */ -int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -306,8 +390,11 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* another task is sharing our hash bucket */ continue; - if (ri->rp && ri->rp->handler) + if (ri->rp && ri->rp->handler){ + __get_cpu_var(current_kprobe) = &ri->rp->kp; ri->rp->handler(ri, regs); + __get_cpu_var(current_kprobe) = NULL; + } orig_ret_address = (unsigned long)ri->ret_addr; recycle_rp_inst(ri); @@ -322,18 +409,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) } BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); - regs->eip = orig_ret_address; - reset_current_kprobe(); spin_unlock_irqrestore(&kretprobe_lock, flags); - preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we don't want the post_handler - * to run (and have re-enabled preemption) - */ - return 1; + return (void*)orig_ret_address; } /* @@ -357,15 +436,17 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * 2) If the single-stepped instruction was a call, the return address * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. + * + * This function also checks instruction size for preparing direct execution. */ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)®s->esp; - unsigned long next_eip = 0; unsigned long copy_eip = (unsigned long)p->ainsn.insn; unsigned long orig_eip = (unsigned long)p->addr; + regs->eflags &= ~TF_MASK; switch (p->ainsn.insn[0]) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); @@ -375,37 +456,51 @@ static void __kprobes resume_execution(struct kprobe *p, case 0xcb: case 0xc2: case 0xca: - regs->eflags &= ~TF_MASK; - /* eip is already adjusted, no more changes required*/ - return; + case 0xea: /* jmp absolute -- eip is correct */ + /* eip is already adjusted, no more changes required */ + p->ainsn.boostable = 1; + goto no_change; case 0xe8: /* call relative - Fix return addr */ *tos = orig_eip + (*tos - copy_eip); break; case 0xff: if ((p->ainsn.insn[1] & 0x30) == 0x10) { /* call absolute, indirect */ - /* Fix return addr; eip is correct. */ - next_eip = regs->eip; + /* + * Fix return addr; eip is correct. + * But this is not boostable + */ *tos = orig_eip + (*tos - copy_eip); + goto no_change; } else if (((p->ainsn.insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ ((p->ainsn.insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ - /* eip is correct. */ - next_eip = regs->eip; + /* eip is correct. And this is boostable */ + p->ainsn.boostable = 1; + goto no_change; } - break; - case 0xea: /* jmp absolute -- eip is correct */ - next_eip = regs->eip; - break; default: break; } - regs->eflags &= ~TF_MASK; - if (next_eip) { - regs->eip = next_eip; - } else { - regs->eip = orig_eip + (regs->eip - copy_eip); + if (p->ainsn.boostable == 0) { + if ((regs->eip > copy_eip) && + (regs->eip - copy_eip) + 5 < MAX_INSN_SIZE) { + /* + * These instructions can be executed directly if it + * jumps back to correct address. + */ + set_jmp_op((void *)regs->eip, + (void *)orig_eip + (regs->eip - copy_eip)); + p->ainsn.boostable = 1; + } else { + p->ainsn.boostable = -1; + } } + + regs->eip = orig_eip + (regs->eip - copy_eip); + +no_change: + return; } /* @@ -453,15 +548,57 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs, kcb); + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the eip points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->eip = (unsigned long)cur->addr; regs->eflags |= kcb->kprobe_old_eflags; - - reset_current_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + if (fixup_exception(regs)) + return 1; + + /* + * fixup_exception() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; } return 0; } @@ -475,6 +612,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) @@ -564,12 +704,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) return 0; } -static struct kprobe trampoline_p = { - .addr = (kprobe_opcode_t *) &kretprobe_trampoline, - .pre_handler = trampoline_probe_handler -}; - int __init arch_init_kprobes(void) { - return register_kprobe(&trampoline_p); + return 0; } diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index 5390b521aca..e7c138f66c5 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -81,6 +81,7 @@ #include <linux/miscdevice.h> #include <linux/spinlock.h> #include <linux/mm.h> +#include <linux/mutex.h> #include <asm/msr.h> #include <asm/uaccess.h> @@ -114,7 +115,7 @@ MODULE_LICENSE("GPL"); static DEFINE_SPINLOCK(microcode_update_lock); /* no concurrent ->write()s are allowed on /dev/cpu/microcode */ -static DECLARE_MUTEX(microcode_sem); +static DEFINE_MUTEX(microcode_mutex); static void __user *user_buffer; /* user area microcode data buffer */ static unsigned int user_buffer_size; /* it's size */ @@ -202,8 +203,6 @@ static inline void mark_microcode_update (int cpu_num, microcode_header_t *mc_he } else if (mc_header->rev == uci->rev) { /* notify the caller of success on this cpu */ uci->err = MC_SUCCESS; - printk(KERN_ERR "microcode: CPU%d already at revision" - " 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev); goto out; } @@ -369,7 +368,6 @@ static void do_update_one (void * unused) struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (uci->mc == NULL) { - printk(KERN_INFO "microcode: No new microcode data for CPU%d\n", cpu_num); return; } @@ -447,7 +445,7 @@ static ssize_t microcode_write (struct file *file, const char __user *buf, size_ return -EINVAL; } - down(µcode_sem); + mutex_lock(µcode_mutex); user_buffer = (void __user *) buf; user_buffer_size = (int) len; @@ -456,31 +454,14 @@ static ssize_t microcode_write (struct file *file, const char __user *buf, size_ if (!ret) ret = (ssize_t)len; - up(µcode_sem); + mutex_unlock(µcode_mutex); return ret; } -static int microcode_ioctl (struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - switch (cmd) { - /* - * XXX: will be removed after microcode_ctl - * is updated to ignore failure of this ioctl() - */ - case MICROCODE_IOCFREE: - return 0; - default: - return -EINVAL; - } - return -EINVAL; -} - static struct file_operations microcode_fops = { .owner = THIS_MODULE, .write = microcode_write, - .ioctl = microcode_ioctl, .open = microcode_open, }; @@ -511,7 +492,6 @@ static int __init microcode_init (void) static void __exit microcode_exit (void) { misc_deregister(µcode_dev); - printk(KERN_INFO "IA-32 Microcode Update Driver v" MICROCODE_VERSION " unregistered\n"); } module_init(microcode_init) diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 9074818b947..d43b498ec74 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -138,12 +138,12 @@ static int __init check_nmi_watchdog(void) if (nmi_watchdog == NMI_LOCAL_APIC) smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); - for_each_cpu(cpu) + for_each_possible_cpu(cpu) prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count; local_irq_enable(); mdelay((10*1000)/nmi_hz); // wait 10 ticks - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { #ifdef CONFIG_SMP /* Check cpu_callin_map here because that is set after the timer is started. */ @@ -510,7 +510,7 @@ void touch_nmi_watchdog (void) * Just reset the alert counters, (other CPUs might be * spinning on locks we hold): */ - for_each_cpu(i) + for_each_possible_cpu(i) alert_counter[i] = 0; /* @@ -529,7 +529,8 @@ void nmi_watchdog_tick (struct pt_regs * regs) * always switch the stack NMI-atomically, it's safe to use * smp_processor_id(). */ - int sum, cpu = smp_processor_id(); + unsigned int sum; + int cpu = smp_processor_id(); sum = per_cpu(irq_stat, cpu).apic_timer_irqs; diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 299e6167408..24b3e745478 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -38,7 +38,6 @@ #include <linux/kallsyms.h> #include <linux/ptrace.h> #include <linux/random.h> -#include <linux/kprobes.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -364,13 +363,6 @@ void exit_thread(void) struct task_struct *tsk = current; struct thread_struct *t = &tsk->thread; - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(tsk); - /* The process may have allocated an io port bitmap... nuke it. */ if (unlikely(NULL != t->io_bitmap_ptr)) { int cpu = get_cpu(); diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index d313a11acaf..8c08660b4e5 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -46,6 +46,7 @@ #include <linux/kexec.h> #include <linux/crash_dump.h> #include <linux/dmi.h> +#include <linux/pfn.h> #include <video/edid.h> @@ -1058,10 +1059,10 @@ static int __init free_available_memory(unsigned long start, unsigned long end, void *arg) { /* check max_low_pfn */ - if (start >= ((max_low_pfn + 1) << PAGE_SHIFT)) + if (start >= (max_low_pfn << PAGE_SHIFT)) return 0; - if (end >= ((max_low_pfn + 1) << PAGE_SHIFT)) - end = (max_low_pfn + 1) << PAGE_SHIFT; + if (end >= (max_low_pfn << PAGE_SHIFT)) + end = max_low_pfn << PAGE_SHIFT; if (start < end) free_bootmem(start, end - start); @@ -1286,8 +1287,6 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat probe_roms(); for (i = 0; i < e820.nr_map; i++) { struct resource *res; - if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) - continue; res = kzalloc(sizeof(struct resource), GFP_ATOMIC); switch (e820.map[i].type) { case E820_RAM: res->name = "System RAM"; break; diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 4c470e99a74..a6969903f2d 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -72,6 +72,9 @@ int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; /* Core ID of each logical CPU */ int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; +/* Last level cache ID of each logical CPU */ +int cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID}; + /* representing HT siblings of each logical CPU */ cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_sibling_map); @@ -440,6 +443,18 @@ static void __devinit smp_callin(void) static int cpucount; +/* maps the cpu to the sched domain representing multi-core */ +cpumask_t cpu_coregroup_map(int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + /* + * For perf, we return last level cache shared map. + * TBD: when power saving sched policy is added, we will return + * cpu_core_map when power saving policy is enabled + */ + return c->llc_shared_map; +} + /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; @@ -459,12 +474,16 @@ set_cpu_sibling_map(int cpu) cpu_set(cpu, cpu_sibling_map[i]); cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); } } } else { cpu_set(cpu, cpu_sibling_map[cpu]); } + cpu_set(cpu, c[cpu].llc_shared_map); + if (current_cpu_data.x86_max_cores == 1) { cpu_core_map[cpu] = cpu_sibling_map[cpu]; c[cpu].booted_cores = 1; @@ -472,6 +491,11 @@ set_cpu_sibling_map(int cpu) } for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (cpu_llc_id[cpu] != BAD_APICID && + cpu_llc_id[cpu] == cpu_llc_id[i]) { + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); + } if (phys_proc_id[cpu] == phys_proc_id[i]) { cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); @@ -1003,7 +1027,6 @@ void cpu_exit_clear(void) cpu_clear(cpu, cpu_callout_map); cpu_clear(cpu, cpu_callin_map); - cpu_clear(cpu, cpu_present_map); cpu_clear(cpu, smp_commenced_mask); unmap_cpu_to_logical_apicid(cpu); @@ -1015,31 +1038,20 @@ struct warm_boot_cpu_info { int cpu; }; -static void __devinit do_warm_boot_cpu(void *p) +static void __cpuinit do_warm_boot_cpu(void *p) { struct warm_boot_cpu_info *info = p; do_boot_cpu(info->apicid, info->cpu); complete(info->complete); } -int __devinit smp_prepare_cpu(int cpu) +static int __cpuinit __smp_prepare_cpu(int cpu) { DECLARE_COMPLETION(done); struct warm_boot_cpu_info info; struct work_struct task; int apicid, ret; - lock_cpu_hotplug(); - - /* - * On x86, CPU0 is never offlined. Trying to bring up an - * already-booted CPU will hang. So check for that case. - */ - if (cpu_online(cpu)) { - ret = -EINVAL; - goto exit; - } - apicid = x86_cpu_to_apicid[cpu]; if (apicid == BAD_APICID) { ret = -ENODEV; @@ -1064,7 +1076,6 @@ int __devinit smp_prepare_cpu(int cpu) zap_low_mappings(); ret = 0; exit: - unlock_cpu_hotplug(); return ret; } #endif @@ -1392,6 +1403,22 @@ void __cpu_die(unsigned int cpu) int __devinit __cpu_up(unsigned int cpu) { +#ifdef CONFIG_HOTPLUG_CPU + int ret=0; + + /* + * We do warm boot only on cpus that had booted earlier + * Otherwise cold boot is all handled from smp_boot_cpus(). + * cpu_callin_map is set during AP kickstart process. Its reset + * when a cpu is taken offline from cpu_exit_clear(). + */ + if (!cpu_isset(cpu, cpu_callin_map)) + ret = __smp_prepare_cpu(cpu); + + if (ret) + return -EIO; +#endif + /* In case one didn't come up */ if (!cpu_isset(cpu, cpu_callin_map)) { printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu); diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S index ac687d00a1c..326595f3fa4 100644 --- a/arch/i386/kernel/syscall_table.S +++ b/arch/i386/kernel/syscall_table.S @@ -310,3 +310,5 @@ ENTRY(sys_call_table) .long sys_pselect6 .long sys_ppoll .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c index 264edaaac31..144e94a0493 100644 --- a/arch/i386/kernel/timers/timer_pm.c +++ b/arch/i386/kernel/timers/timer_pm.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/init.h> +#include <linux/pci.h> #include <asm/types.h> #include <asm/timer.h> #include <asm/smp.h> @@ -45,24 +46,31 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; #define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ +static int pmtmr_need_workaround __read_mostly = 1; + /*helper function to safely read acpi pm timesource*/ static inline u32 read_pmtmr(void) { - u32 v1=0,v2=0,v3=0; - /* It has been reported that because of various broken - * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time - * source is not latched, so you must read it multiple - * times to insure a safe value is read. - */ - do { - v1 = inl(pmtmr_ioport); - v2 = inl(pmtmr_ioport); - v3 = inl(pmtmr_ioport); - } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) - || (v3 > v1 && v3 < v2)); - - /* mask the output to 24 bits */ - return v2 & ACPI_PM_MASK; + if (pmtmr_need_workaround) { + u32 v1, v2, v3; + + /* It has been reported that because of various broken + * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time + * source is not latched, so you must read it multiple + * times to insure a safe value is read. + */ + do { + v1 = inl(pmtmr_ioport); + v2 = inl(pmtmr_ioport); + v3 = inl(pmtmr_ioport); + } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) + || (v3 > v1 && v3 < v2)); + + /* mask the output to 24 bits */ + return v2 & ACPI_PM_MASK; + } + + return inl(pmtmr_ioport) & ACPI_PM_MASK; } @@ -263,6 +271,72 @@ struct init_timer_opts __initdata timer_pmtmr_init = { .opts = &timer_pmtmr, }; +#ifdef CONFIG_PCI +/* + * PIIX4 Errata: + * + * The power management timer may return improper results when read. + * Although the timer value settles properly after incrementing, + * while incrementing there is a 3 ns window every 69.8 ns where the + * timer value is indeterminate (a 4.2% chance that the data will be + * incorrect when read). As a result, the ACPI free running count up + * timer specification is violated due to erroneous reads. + */ +static int __init pmtmr_bug_check(void) +{ + static struct pci_device_id gray_list[] __initdata = { + /* these chipsets may have bug. */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801DB_0) }, + { }, + }; + struct pci_dev *dev; + int pmtmr_has_bug = 0; + u8 rev; + + if (cur_timer != &timer_pmtmr || !pmtmr_need_workaround) + return 0; + + dev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_3, NULL); + if (dev) { + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + /* the bug has been fixed in PIIX4M */ + if (rev < 3) { + printk(KERN_WARNING "* Found PM-Timer Bug on this " + "chipset. Due to workarounds for a bug,\n" + "* this time source is slow. Consider trying " + "other time sources (clock=)\n"); + pmtmr_has_bug = 1; + } + pci_dev_put(dev); + } + + if (pci_dev_present(gray_list)) { + printk(KERN_WARNING "* This chipset may have PM-Timer Bug. Due" + " to workarounds for a bug,\n" + "* this time source is slow. If you are sure your timer" + " does not have\n" + "* this bug, please use \"pmtmr_good\" to disable the " + "workaround\n"); + pmtmr_has_bug = 1; + } + + if (!pmtmr_has_bug) + pmtmr_need_workaround = 0; + + return 0; +} +device_initcall(pmtmr_bug_check); +#endif + +static int __init pmtr_good_setup(char *__str) +{ + pmtmr_need_workaround = 0; + return 1; +} +__setup("pmtmr_good", pmtr_good_setup); + MODULE_LICENSE("GPL"); MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); MODULE_DESCRIPTION("Power Management Timer (PMTMR) as primary timing source for x86"); diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index de5386b01d3..6b63a5aa1e4 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -92,22 +92,21 @@ asmlinkage void spurious_interrupt_bug(void); asmlinkage void machine_check(void); static int kstack_depth_to_print = 24; -struct notifier_block *i386die_chain; -static DEFINE_SPINLOCK(die_notifier_lock); +ATOMIC_NOTIFIER_HEAD(i386die_chain); int register_die_notifier(struct notifier_block *nb) { - int err = 0; - unsigned long flags; - vmalloc_sync_all(); - spin_lock_irqsave(&die_notifier_lock, flags); - err = notifier_chain_register(&i386die_chain, nb); - spin_unlock_irqrestore(&die_notifier_lock, flags); - return err; + return atomic_notifier_chain_register(&i386die_chain, nb); } EXPORT_SYMBOL(register_die_notifier); +int unregister_die_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&i386die_chain, nb); +} +EXPORT_SYMBOL(unregister_die_notifier); + static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) { return p > (void *)tinfo && @@ -386,8 +385,12 @@ void die(const char * str, struct pt_regs * regs, long err) #endif if (nl) printk("\n"); - notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV); - show_registers(regs); + if (notify_die(DIE_OOPS, str, regs, err, + current->thread.trap_no, SIGSEGV) != + NOTIFY_STOP) + show_registers(regs); + else + regs = NULL; } else printk(KERN_EMERG "Recursive die() failure, output suppressed\n"); @@ -395,6 +398,9 @@ void die(const char * str, struct pt_regs * regs, long err) die.lock_owner = -1; spin_unlock_irqrestore(&die.lock, flags); + if (!regs) + return; + if (kexec_should_crash(current)) crash_kexec(regs); @@ -623,7 +629,7 @@ static DEFINE_SPINLOCK(nmi_print_lock); void die_nmi (struct pt_regs *regs, const char *msg) { - if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 0, SIGINT) == + if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP) return; @@ -662,7 +668,7 @@ static void default_do_nmi(struct pt_regs * regs) reason = get_nmi_reason(); if (!(reason & 0xc0)) { - if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 0, SIGINT) + if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; #ifdef CONFIG_X86_LOCAL_APIC @@ -678,7 +684,7 @@ static void default_do_nmi(struct pt_regs * regs) unknown_nmi_error(reason, regs); return; } - if (notify_die(DIE_NMI, "nmi", regs, reason, 0, SIGINT) == NOTIFY_STOP) + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; if (reason & 0x80) mem_parity_error(reason, regs); diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c index f51c894a7da..aee14fafd13 100644 --- a/arch/i386/kernel/vm86.c +++ b/arch/i386/kernel/vm86.c @@ -43,6 +43,7 @@ #include <linux/smp_lock.h> #include <linux/highmem.h> #include <linux/ptrace.h> +#include <linux/audit.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -252,6 +253,7 @@ out: static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk) { struct tss_struct *tss; + long eax; /* * make sure the vm86() system call doesn't try to do anything silly */ @@ -305,13 +307,19 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk tsk->thread.screen_bitmap = info->screen_bitmap; if (info->flags & VM86_SCREEN_BITMAP) mark_screen_rdonly(tsk->mm); + __asm__ __volatile__("xorl %eax,%eax; movl %eax,%fs; movl %eax,%gs\n\t"); + __asm__ __volatile__("movl %%eax, %0\n" :"=r"(eax)); + + /*call audit_syscall_exit since we do not exit via the normal paths */ + if (unlikely(current->audit_context)) + audit_syscall_exit(current, AUDITSC_RESULT(eax), eax); + __asm__ __volatile__( - "xorl %%eax,%%eax; movl %%eax,%%fs; movl %%eax,%%gs\n\t" "movl %0,%%esp\n\t" "movl %1,%%ebp\n\t" "jmp resume_userspace" : /* no outputs */ - :"r" (&info->regs), "r" (task_thread_info(tsk)) : "ax"); + :"r" (&info->regs), "r" (task_thread_info(tsk))); /* we never return here */ } diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 3f21c6f6466..8831303a473 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -7,6 +7,7 @@ #include <asm-generic/vmlinux.lds.h> #include <asm/thread_info.h> #include <asm/page.h> +#include <asm/cache.h> OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") OUTPUT_ARCH(i386) @@ -135,7 +136,7 @@ SECTIONS __initramfs_start = .; .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } __initramfs_end = .; - . = ALIGN(32); + . = ALIGN(L1_CACHE_BYTES); __per_cpu_start = .; .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) } __per_cpu_end = .; diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 8165626a5c3..70e560a1b79 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -1700,7 +1700,7 @@ after_handle_vic_irq(unsigned int irq) printk("VOYAGER SMP: CPU%d lost interrupt %d\n", cpu, irq); - for_each_cpu(real_cpu, mask) { + for_each_possible_cpu(real_cpu, mask) { outb(VIC_CPU_MASQUERADE_ENABLE | real_cpu, VIC_PROCESSOR_ID); diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index c4af9638dbf..fe6eb901326 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -31,6 +31,7 @@ #include <linux/nodemask.h> #include <linux/module.h> #include <linux/kexec.h> +#include <linux/pfn.h> #include <asm/e820.h> #include <asm/setup.h> @@ -352,17 +353,6 @@ void __init zone_sizes_init(void) { int nid; - /* - * Insert nodes into pgdat_list backward so they appear in order. - * Clobber node 0's links and NULL out pgdat_list before starting. - */ - pgdat_list = NULL; - for (nid = MAX_NUMNODES - 1; nid >= 0; nid--) { - if (!node_online(nid)) - continue; - NODE_DATA(nid)->pgdat_next = pgdat_list; - pgdat_list = NODE_DATA(nid); - } for_each_online_node(nid) { unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index 9db3242103b..2889567e21a 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -36,7 +36,7 @@ void show_mem(void) printk(KERN_INFO "Mem-info:\n"); show_free_areas(); printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; ++i) { page = pgdat_page_nr(pgdat, i); diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 1accce50c2c..1a2076ce6f6 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -122,7 +122,7 @@ static void nmi_save_registers(void * dummy) static void free_msrs(void) { int i; - for_each_cpu(i) { + for_each_possible_cpu(i) { kfree(cpu_msrs[i].counters); cpu_msrs[i].counters = NULL; kfree(cpu_msrs[i].controls); diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index ff7ae6b664e..edffe25a477 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -34,6 +34,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -42,6 +46,10 @@ config TIME_INTERPOLATION bool default y +config DMI + bool + default y + config EFI bool default y @@ -252,6 +260,15 @@ config NR_CPUS than 64 will cause the use of a CPU mask array, causing a small performance hit. +config IA64_NR_NODES + int "Maximum number of NODEs (256-1024)" if (IA64_SGI_SN2 || IA64_GENERIC) + range 256 1024 + depends on IA64_SGI_SN2 || IA64_GENERIC + default "256" + help + This option specifies the maximum number of nodes in your SSI system. + If in doubt, use the default. + config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && EXPERIMENTAL diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index f722e1a2594..80ea7506fa1 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -1,6 +1,9 @@ # # ia64/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -62,7 +65,7 @@ drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/ boot := arch/ia64/hp/sim/boot -.PHONY: boot compressed check +PHONY += boot compressed check all: compressed unwcheck diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 744fd2f79f6..0d29aa2066b 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -116,6 +116,7 @@ CONFIG_IOSAPIC=y CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 +CONFIG_IA64_NR_NODES=256 CONFIG_HOTPLUG_CPU=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 8206752161b..a718034d68d 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -116,6 +116,7 @@ CONFIG_IA64_SGI_SN_XP=m CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=1024 +CONFIG_IA64_NR_NODES=256 # CONFIG_HOTPLUG_CPU is not set CONFIG_SCHED_SMT=y CONFIG_PREEMPT=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 3e767288a74..6cba55da572 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -116,6 +116,7 @@ CONFIG_IOSAPIC=y CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 +CONFIG_IA64_NR_NODES=256 CONFIG_HOTPLUG_CPU=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set diff --git a/arch/ia64/dig/setup.c b/arch/ia64/dig/setup.c index c9104bfff66..38aa9c10885 100644 --- a/arch/ia64/dig/setup.c +++ b/arch/ia64/dig/setup.c @@ -69,8 +69,3 @@ dig_setup (char **cmdline_p) screen_info.orig_video_isVGA = 1; /* XXX fake */ screen_info.orig_video_ega_bx = 3; /* XXX fake */ } - -void __init -dig_irq_init (void) -{ -} diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h index 68ceb4e690c..ccb98ed48e5 100644 --- a/arch/ia64/ia32/ia32priv.h +++ b/arch/ia64/ia32/ia32priv.h @@ -29,9 +29,9 @@ struct partial_page { struct partial_page *next; /* linked list, sorted by address */ struct rb_node pp_rb; - /* 64K is the largest "normal" page supported by ia64 ABI. So 4K*32 + /* 64K is the largest "normal" page supported by ia64 ABI. So 4K*64 * should suffice.*/ - unsigned int bitmap; + unsigned long bitmap; unsigned int base; }; diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 70dba1f0e2e..5366b3b23d0 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -25,7 +25,6 @@ #include <linux/resource.h> #include <linux/times.h> #include <linux/utsname.h> -#include <linux/timex.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/sem.h> @@ -1166,19 +1165,7 @@ put_tv32 (struct compat_timeval __user *o, struct timeval *i) asmlinkage unsigned long sys32_alarm (unsigned int seconds) { - struct itimerval it_new, it_old; - unsigned int oldalarm; - - it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0; - it_new.it_value.tv_sec = seconds; - it_new.it_value.tv_usec = 0; - do_setitimer(ITIMER_REAL, &it_new, &it_old); - oldalarm = it_old.it_value.tv_sec; - /* ehhh.. We can't return 0 if we have an alarm pending.. */ - /* And we'd better return too much than too little anyway */ - if (it_old.it_value.tv_usec) - oldalarm++; - return oldalarm; + return alarm_setitimer(seconds); } /* Translations due to time_t size differences. Which affects all @@ -2603,78 +2590,4 @@ sys32_setresgid(compat_gid_t rgid, compat_gid_t egid, ssgid = (sgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)sgid); return sys_setresgid(srgid, segid, ssgid); } - -/* Handle adjtimex compatibility. */ - -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - -extern int do_adjtimex(struct timex *); - -asmlinkage long -sys32_adjtimex(struct timex32 *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if(get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if(put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} #endif /* NOTYET */ diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 09a0dbc17fb..59e871dae74 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \ irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o \ salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \ - unwind.o mca.o mca_asm.o topology.o + unwind.o mca.o mca_asm.o topology.o dmi_scan.o obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o @@ -30,6 +30,7 @@ obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o mca_recovery-y += mca_drv.o mca_drv_asm.o +dmi_scan-y += ../../i386/kernel/dmi_scan.o # The gate DSO image is built using a special linker script. targets += gate.so gate-syms.o diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 4722ec51c70..58c93a30348 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -420,6 +420,26 @@ int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS]; int __initdata nid_to_pxm_map[MAX_NUMNODES]; static struct acpi_table_slit __initdata *slit_table; +static int get_processor_proximity_domain(struct acpi_table_processor_affinity *pa) +{ + int pxm; + + pxm = pa->proximity_domain; + if (ia64_platform_is("sn2")) + pxm += pa->reserved[0] << 8; + return pxm; +} + +static int get_memory_proximity_domain(struct acpi_table_memory_affinity *ma) +{ + int pxm; + + pxm = ma->proximity_domain; + if (ia64_platform_is("sn2")) + pxm += ma->reserved1[0] << 8; + return pxm; +} + /* * ACPI 2.0 SLIT (System Locality Information Table) * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf @@ -443,13 +463,20 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) void __init acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) { + int pxm; + + if (!pa->flags.enabled) + return; + + pxm = get_processor_proximity_domain(pa); + /* record this node in proximity bitmap */ - pxm_bit_set(pa->proximity_domain); + pxm_bit_set(pxm); node_cpuid[srat_num_cpus].phys_id = (pa->apic_id << 8) | (pa->lsapic_eid); /* nid should be overridden as logical node id later */ - node_cpuid[srat_num_cpus].nid = pa->proximity_domain; + node_cpuid[srat_num_cpus].nid = pxm; srat_num_cpus++; } @@ -457,10 +484,10 @@ void __init acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) { unsigned long paddr, size; - u8 pxm; + int pxm; struct node_memblk_s *p, *q, *pend; - pxm = ma->proximity_domain; + pxm = get_memory_proximity_domain(ma); /* fill node memory chunk structure */ paddr = ma->base_addr_hi; @@ -624,9 +651,9 @@ unsigned long __init acpi_find_rsdp(void) { unsigned long rsdp_phys = 0; - if (efi.acpi20) - rsdp_phys = __pa(efi.acpi20); - else if (efi.acpi) + if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) + rsdp_phys = efi.acpi20; + else if (efi.acpi != EFI_INVALID_TABLE_ADDR) printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n"); return rsdp_phys; diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 9990320b6f9..12cfedce73b 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -458,24 +458,33 @@ efi_init (void) printk(KERN_INFO "EFI v%u.%.02u by %s:", efi.systab->hdr.revision >> 16, efi.systab->hdr.revision & 0xffff, vendor); + efi.mps = EFI_INVALID_TABLE_ADDR; + efi.acpi = EFI_INVALID_TABLE_ADDR; + efi.acpi20 = EFI_INVALID_TABLE_ADDR; + efi.smbios = EFI_INVALID_TABLE_ADDR; + efi.sal_systab = EFI_INVALID_TABLE_ADDR; + efi.boot_info = EFI_INVALID_TABLE_ADDR; + efi.hcdp = EFI_INVALID_TABLE_ADDR; + efi.uga = EFI_INVALID_TABLE_ADDR; + for (i = 0; i < (int) efi.systab->nr_tables; i++) { if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) { - efi.mps = __va(config_tables[i].table); + efi.mps = config_tables[i].table; printk(" MPS=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) { - efi.acpi20 = __va(config_tables[i].table); + efi.acpi20 = config_tables[i].table; printk(" ACPI 2.0=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) { - efi.acpi = __va(config_tables[i].table); + efi.acpi = config_tables[i].table; printk(" ACPI=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) { - efi.smbios = __va(config_tables[i].table); + efi.smbios = config_tables[i].table; printk(" SMBIOS=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) == 0) { - efi.sal_systab = __va(config_tables[i].table); + efi.sal_systab = config_tables[i].table; printk(" SALsystab=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) { - efi.hcdp = __va(config_tables[i].table); + efi.hcdp = config_tables[i].table; printk(" HCDP=0x%lx", config_tables[i].table); } } @@ -677,27 +686,34 @@ EXPORT_SYMBOL(efi_mem_attributes); /* * Determines whether the memory at phys_addr supports the desired * attribute (WB, UC, etc). If this returns 1, the caller can safely - * access *size bytes at phys_addr with the specified attribute. + * access size bytes at phys_addr with the specified attribute. */ -static int -efi_mem_attribute_range (unsigned long phys_addr, unsigned long *size, u64 attr) +int +efi_mem_attribute_range (unsigned long phys_addr, unsigned long size, u64 attr) { + unsigned long end = phys_addr + size; efi_memory_desc_t *md = efi_memory_descriptor(phys_addr); - unsigned long md_end; - if (!md || (md->attribute & attr) != attr) + /* + * Some firmware doesn't report MMIO regions in the EFI memory + * map. The Intel BigSur (a.k.a. HP i2000) has this problem. + * On those platforms, we have to assume UC is valid everywhere. + */ + if (!md || (md->attribute & attr) != attr) { + if (attr == EFI_MEMORY_UC && !efi_memmap_has_mmio()) + return 1; return 0; + } do { - md_end = efi_md_end(md); - if (phys_addr + *size <= md_end) + unsigned long md_end = efi_md_end(md); + + if (end <= md_end) return 1; md = efi_memory_descriptor(md_end); - if (!md || (md->attribute & attr) != attr) { - *size = md_end - phys_addr; - return 1; - } + if (!md || (md->attribute & attr) != attr) + return 0; } while (md); return 0; } @@ -708,7 +724,7 @@ efi_mem_attribute_range (unsigned long phys_addr, unsigned long *size, u64 attr) * control access size. */ int -valid_phys_addr_range (unsigned long phys_addr, unsigned long *size) +valid_phys_addr_range (unsigned long phys_addr, unsigned long size) { return efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_WB); } @@ -723,7 +739,7 @@ valid_phys_addr_range (unsigned long phys_addr, unsigned long *size) * because that doesn't appear in the boot-time EFI memory map. */ int -valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long *size) +valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long size) { if (efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_WB)) return 1; @@ -731,14 +747,6 @@ valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long *size) if (efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_UC)) return 1; - /* - * Some firmware doesn't report MMIO regions in the EFI memory map. - * The Intel BigSur (a.k.a. HP i2000) has this problem. In this - * case, we can't use the EFI memory map to validate mmap requests. - */ - if (!efi_memmap_has_mmio()) - return 1; - return 0; } diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index dcd906fe574..829a43cab79 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -865,6 +865,7 @@ ENTRY(interrupt) ;; SAVE_REST ;; + MCA_RECOVER_RANGE(interrupt) alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group mov out0=cr.ivr // pass cr.ivr as first arg add out1=16,sp // pass pointer to pt_regs as second arg diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 50ae8c7d453..789881ca83d 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -34,6 +34,7 @@ #include <asm/pgtable.h> #include <asm/kdebug.h> #include <asm/sections.h> +#include <asm/uaccess.h> extern void jprobe_inst_return(void); @@ -722,13 +723,50 @@ static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs); - reset_current_kprobe(); + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the instruction pointer points back to + * the probe address and allow the page fault handler + * to continue as a normal page fault. + */ + regs->cr_iip = ((unsigned long)cur->addr) & ~0xFULL; + ia64_psr(regs)->ri = ((unsigned long)cur->addr) & 0xf; + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * Let ia64_do_page_fault() fix it. + */ + break; + default: + break; } return 0; @@ -740,6 +778,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch(val) { case DIE_BREAK: /* err is break number from ia64_bad_break() */ diff --git a/arch/ia64/kernel/machvec.c b/arch/ia64/kernel/machvec.c index c3a04ee7f4f..4b0b71d5aef 100644 --- a/arch/ia64/kernel/machvec.c +++ b/arch/ia64/kernel/machvec.c @@ -14,7 +14,15 @@ struct ia64_machine_vector ia64_mv; EXPORT_SYMBOL(ia64_mv); -static struct ia64_machine_vector * +static __initdata const char *mvec_name; +static __init int setup_mvec(char *s) +{ + mvec_name = s; + return 0; +} +early_param("machvec", setup_mvec); + +static struct ia64_machine_vector * __init lookup_machvec (const char *name) { extern struct ia64_machine_vector machvec_start[]; @@ -33,10 +41,13 @@ machvec_init (const char *name) { struct ia64_machine_vector *mv; + if (!name) + name = mvec_name ? mvec_name : acpi_get_sysname(); mv = lookup_machvec(name); - if (!mv) { - panic("generic kernel failed to find machine vector for platform %s!", name); - } + if (!mv) + panic("generic kernel failed to find machine vector for" + " platform %s!", name); + ia64_mv = *mv; printk(KERN_INFO "booting generic kernel on platform %s\n", name); } diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index b57e723f194..8963171788d 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -69,6 +69,7 @@ #include <linux/kernel.h> #include <linux/smp.h> #include <linux/workqueue.h> +#include <linux/cpumask.h> #include <asm/delay.h> #include <asm/kdebug.h> @@ -83,6 +84,7 @@ #include <asm/irq.h> #include <asm/hw_irq.h> +#include "mca_drv.h" #include "entry.h" #if defined(IA64_MCA_DEBUG_INFO) @@ -133,7 +135,7 @@ static int cpe_poll_enabled = 1; extern void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe); -static int mca_init; +static int mca_init __initdata; static void inline @@ -184,7 +186,7 @@ static ia64_state_log_t ia64_state_log[IA64_MAX_LOG_TYPES]; * Inputs : info_type (SAL_INFO_TYPE_{MCA,INIT,CMC,CPE}) * Outputs : None */ -static void +static void __init ia64_log_init(int sal_info_type) { u64 max_size = 0; @@ -281,6 +283,50 @@ ia64_mca_log_sal_error_record(int sal_info_type) ia64_sal_clear_state_info(sal_info_type); } +/* + * search_mca_table + * See if the MCA surfaced in an instruction range + * that has been tagged as recoverable. + * + * Inputs + * first First address range to check + * last Last address range to check + * ip Instruction pointer, address we are looking for + * + * Return value: + * 1 on Success (in the table)/ 0 on Failure (not in the table) + */ +int +search_mca_table (const struct mca_table_entry *first, + const struct mca_table_entry *last, + unsigned long ip) +{ + const struct mca_table_entry *curr; + u64 curr_start, curr_end; + + curr = first; + while (curr <= last) { + curr_start = (u64) &curr->start_addr + curr->start_addr; + curr_end = (u64) &curr->end_addr + curr->end_addr; + + if ((ip >= curr_start) && (ip <= curr_end)) { + return 1; + } + curr++; + } + return 0; +} + +/* Given an address, look for it in the mca tables. */ +int mca_recover_range(unsigned long addr) +{ + extern struct mca_table_entry __start___mca_table[]; + extern struct mca_table_entry __stop___mca_table[]; + + return search_mca_table(__start___mca_table, __stop___mca_table-1, addr); +} +EXPORT_SYMBOL_GPL(mca_recover_range); + #ifdef CONFIG_ACPI int cpe_vector = -1; @@ -355,7 +401,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) * Outputs * None */ -static void +static void __init ia64_mca_register_cpev (int cpev) { /* Register the CPE interrupt vector with SAL */ @@ -386,7 +432,7 @@ ia64_mca_register_cpev (int cpev) * Outputs * None */ -void +void __cpuinit ia64_mca_cmc_vector_setup (void) { cmcv_reg_t cmcv; @@ -747,31 +793,34 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, ia64_mca_modify_comm(previous_current); goto no_mod; } - if (r13 != sos->prev_IA64_KR_CURRENT) { - msg = "inconsistent previous current and r13"; - goto no_mod; - } - if ((r12 - r13) >= KERNEL_STACK_SIZE) { - msg = "inconsistent r12 and r13"; - goto no_mod; - } - if ((ar_bspstore - r13) >= KERNEL_STACK_SIZE) { - msg = "inconsistent ar.bspstore and r13"; - goto no_mod; - } - va.p = old_bspstore; - if (va.f.reg < 5) { - msg = "old_bspstore is in the wrong region"; - goto no_mod; - } - if ((ar_bsp - r13) >= KERNEL_STACK_SIZE) { - msg = "inconsistent ar.bsp and r13"; - goto no_mod; - } - size += (ia64_rse_skip_regs(old_bspstore, slots) - old_bspstore) * 8; - if (ar_bspstore + size > r12) { - msg = "no room for blocked state"; - goto no_mod; + + if (!mca_recover_range(ms->pmsa_iip)) { + if (r13 != sos->prev_IA64_KR_CURRENT) { + msg = "inconsistent previous current and r13"; + goto no_mod; + } + if ((r12 - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent r12 and r13"; + goto no_mod; + } + if ((ar_bspstore - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent ar.bspstore and r13"; + goto no_mod; + } + va.p = old_bspstore; + if (va.f.reg < 5) { + msg = "old_bspstore is in the wrong region"; + goto no_mod; + } + if ((ar_bsp - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent ar.bsp and r13"; + goto no_mod; + } + size += (ia64_rse_skip_regs(old_bspstore, slots) - old_bspstore) * 8; + if (ar_bspstore + size > r12) { + msg = "no room for blocked state"; + goto no_mod; + } } ia64_mca_modify_comm(previous_current); @@ -1443,7 +1492,7 @@ static struct irqaction mca_cpep_irqaction = { * format most of the fields. */ -static void +static void __cpuinit format_mca_init_stack(void *mca_data, unsigned long offset, const char *type, int cpu) { @@ -1457,7 +1506,7 @@ format_mca_init_stack(void *mca_data, unsigned long offset, ti->cpu = cpu; p->thread_info = ti; p->state = TASK_UNINTERRUPTIBLE; - __set_bit(cpu, &p->cpus_allowed); + cpu_set(cpu, p->cpus_allowed); INIT_LIST_HEAD(&p->tasks); p->parent = p->real_parent = p->group_leader = p; INIT_LIST_HEAD(&p->children); @@ -1467,7 +1516,7 @@ format_mca_init_stack(void *mca_data, unsigned long offset, /* Do per-CPU MCA-related initialization. */ -void __devinit +void __cpuinit ia64_mca_cpu_init(void *cpu_data) { void *pal_vaddr; diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index e883d85906d..37c88eb5587 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -6,6 +6,7 @@ * Copyright (C) Hidetoshi Seto (seto.hidetoshi@jp.fujitsu.com) * Copyright (C) 2005 Silicon Graphics, Inc * Copyright (C) 2005 Keith Owens <kaos@sgi.com> + * Copyright (C) 2006 Russ Anderson <rja@sgi.com> */ #include <linux/config.h> #include <linux/types.h> @@ -121,11 +122,12 @@ mca_page_isolate(unsigned long paddr) */ void -mca_handler_bh(unsigned long paddr) +mca_handler_bh(unsigned long paddr, void *iip, unsigned long ipsr) { - printk(KERN_ERR - "OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n", - current->pid, current->comm, paddr); + printk(KERN_ERR "OS_MCA: process [cpu %d, pid: %d, uid: %d, " + "iip: %p, psr: 0x%lx,paddr: 0x%lx](%s) encounters MCA.\n", + raw_smp_processor_id(), current->pid, current->uid, + iip, ipsr, paddr, current->comm); spin_lock(&mca_bh_lock); switch (mca_page_isolate(paddr)) { @@ -442,21 +444,26 @@ recover_from_read_error(slidx_table_t *slidx, if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate)) return 0; psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr); + psr2 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_xpsr); /* * Check the privilege level of interrupted context. * If it is user-mode, then terminate affected process. */ - if (psr1->cpl != 0) { + + pmsa = sos->pal_min_state; + if (psr1->cpl != 0 || + ((psr2->cpl != 0) && mca_recover_range(pmsa->pmsa_iip))) { smei = peidx_bus_check(peidx, 0); if (smei->valid.target_identifier) { /* * setup for resume to bottom half of MCA, * "mca_handler_bhhook" */ - pmsa = sos->pal_min_state; - /* pass to bhhook as 1st argument (gr8) */ + /* pass to bhhook as argument (gr8, ...) */ pmsa->pmsa_gr[8-1] = smei->target_identifier; + pmsa->pmsa_gr[9-1] = pmsa->pmsa_iip; + pmsa->pmsa_gr[10-1] = pmsa->pmsa_ipsr; /* set interrupted return address (but no use) */ pmsa->pmsa_br0 = pmsa->pmsa_iip; /* change resume address to bottom half */ @@ -466,6 +473,7 @@ recover_from_read_error(slidx_table_t *slidx, psr2 = (struct ia64_psr *)&pmsa->pmsa_ipsr; psr2->cpl = 0; psr2->ri = 0; + psr2->bn = 1; psr2->i = 0; return 1; diff --git a/arch/ia64/kernel/mca_drv.h b/arch/ia64/kernel/mca_drv.h index e2f6fa1e0ef..31a2e52bb16 100644 --- a/arch/ia64/kernel/mca_drv.h +++ b/arch/ia64/kernel/mca_drv.h @@ -111,3 +111,10 @@ typedef struct slidx_table { slidx_foreach_entry(__pos, &((slidx)->sec)) { __count++; }\ __count; }) +struct mca_table_entry { + int start_addr; /* location-relative starting address of MCA recoverable range */ + int end_addr; /* location-relative ending address of MCA recoverable range */ +}; + +extern const struct mca_table_entry *search_mca_tables (unsigned long addr); +extern int mca_recover_range(unsigned long); diff --git a/arch/ia64/kernel/mca_drv_asm.S b/arch/ia64/kernel/mca_drv_asm.S index 3f298ee4d00..e6a580d354b 100644 --- a/arch/ia64/kernel/mca_drv_asm.S +++ b/arch/ia64/kernel/mca_drv_asm.S @@ -14,15 +14,12 @@ GLOBAL_ENTRY(mca_handler_bhhook) invala // clear RSE ? - ;; cover ;; clrrrb ;; - alloc r16=ar.pfs,0,2,1,0 // make a new frame - ;; + alloc r16=ar.pfs,0,2,3,0 // make a new frame mov ar.rsc=0 - ;; mov r13=IA64_KR(CURRENT) // current task pointer ;; mov r2=r13 @@ -30,7 +27,6 @@ GLOBAL_ENTRY(mca_handler_bhhook) addl r22=IA64_RBS_OFFSET,r2 ;; mov ar.bspstore=r22 - ;; addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 ;; adds r2=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 @@ -40,12 +36,12 @@ GLOBAL_ENTRY(mca_handler_bhhook) movl loc1=mca_handler_bh // recovery C function ;; mov out0=r8 // poisoned address + mov out1=r9 // iip + mov out2=r10 // psr mov b6=loc1 ;; mov loc1=rp - ;; - ssm psr.i - ;; + ssm psr.i | psr.ic br.call.sptk.many rp=b6 // does not return ... ;; mov ar.pfs=loc0 @@ -53,5 +49,4 @@ GLOBAL_ENTRY(mca_handler_bhhook) ;; mov r8=r0 br.ret.sptk.many rp - ;; END(mca_handler_bhhook) diff --git a/arch/ia64/kernel/numa.c b/arch/ia64/kernel/numa.c index a68ce667809..0766493d4d0 100644 --- a/arch/ia64/kernel/numa.c +++ b/arch/ia64/kernel/numa.c @@ -25,7 +25,7 @@ #include <asm/processor.h> #include <asm/smp.h> -u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned; +u16 cpu_to_node_map[NR_CPUS] __cacheline_aligned; EXPORT_SYMBOL(cpu_to_node_map); cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned; diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c index 6a4ac7d70b3..bc11bb096f5 100644 --- a/arch/ia64/kernel/patch.c +++ b/arch/ia64/kernel/patch.c @@ -115,7 +115,7 @@ ia64_patch_vtop (unsigned long start, unsigned long end) ia64_srlz_i(); } -void +void __init ia64_patch_mckinley_e9 (unsigned long start, unsigned long end) { static int first_time = 1; @@ -149,7 +149,7 @@ ia64_patch_mckinley_e9 (unsigned long start, unsigned long end) ia64_srlz_i(); } -static void +static void __init patch_fsyscall_table (unsigned long start, unsigned long end) { extern unsigned long fsyscall_table[NR_syscalls]; @@ -166,7 +166,7 @@ patch_fsyscall_table (unsigned long start, unsigned long end) ia64_srlz_i(); } -static void +static void __init patch_brl_fsys_bubble_down (unsigned long start, unsigned long end) { extern char fsys_bubble_down[]; @@ -184,7 +184,7 @@ patch_brl_fsys_bubble_down (unsigned long start, unsigned long end) ia64_srlz_i(); } -void +void __init ia64_patch_gate (void) { # define START(name) ((unsigned long) __start_gate_##name##_patchlist) diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 309d59658e5..355d57970ba 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -30,7 +30,6 @@ #include <linux/efi.h> #include <linux/interrupt.h> #include <linux/delay.h> -#include <linux/kprobes.h> #include <asm/cpu.h> #include <asm/delay.h> @@ -738,13 +737,6 @@ void exit_thread (void) { - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(current); - ia64_drop_fpu(current); #ifdef CONFIG_PERFMON /* if needed, stop monitoring and flush state to perfmon context */ diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index eaed14aac6a..9887c8787e7 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -1656,8 +1656,14 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6, long arg7, struct pt_regs regs) { - if (unlikely(current->audit_context)) - audit_syscall_exit(current, AUDITSC_RESULT(regs.r10), regs.r8); + if (unlikely(current->audit_context)) { + int success = AUDITSC_RESULT(regs.r10); + long result = regs.r8; + + if (success != AUDITSC_SUCCESS) + result = -result; + audit_syscall_exit(current, success, result); + } if (test_thread_flag(TIF_SYSCALL_TRACE) && (current->ptrace & PT_PTRACED)) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 958c1508036..e4dfda1eb7d 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -37,6 +37,7 @@ #include <linux/string.h> #include <linux/threads.h> #include <linux/tty.h> +#include <linux/dmi.h> #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/efi.h> @@ -130,8 +131,8 @@ EXPORT_SYMBOL(ia64_max_iommu_merge_mask); /* * We use a special marker for the end of memory and it uses the extra (+1) slot */ -struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1]; -int num_rsvd_regions; +struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1] __initdata; +int num_rsvd_regions __initdata; /* @@ -140,7 +141,7 @@ int num_rsvd_regions; * caller-specified function is called with the memory ranges that remain after filtering. * This routine does not assume the incoming segments are sorted. */ -int +int __init filter_rsvd_memory (unsigned long start, unsigned long end, void *arg) { unsigned long range_start, range_end, prev_start; @@ -176,7 +177,7 @@ filter_rsvd_memory (unsigned long start, unsigned long end, void *arg) return 0; } -static void +static void __init sort_regions (struct rsvd_region *rsvd_region, int max) { int j; @@ -217,7 +218,7 @@ __initcall(register_memory); * initrd, etc. There are currently %IA64_MAX_RSVD_REGIONS defined, * see include/asm-ia64/meminit.h if you need to define more. */ -void +void __init reserve_memory (void) { int n = 0; @@ -269,7 +270,7 @@ reserve_memory (void) * Grab the initrd start and end from the boot parameter struct given us by * the boot loader. */ -void +void __init find_initrd (void) { #ifdef CONFIG_BLK_DEV_INITRD @@ -361,7 +362,7 @@ mark_bsp_online (void) } #ifdef CONFIG_SMP -static void +static void __init check_for_logical_procs (void) { pal_logical_to_physical_t info; @@ -388,6 +389,14 @@ check_for_logical_procs (void) } #endif +static __initdata int nomca; +static __init int setup_nomca(char *s) +{ + nomca = 1; + return 0; +} +early_param("nomca", setup_nomca); + void __init setup_arch (char **cmdline_p) { @@ -401,35 +410,15 @@ setup_arch (char **cmdline_p) efi_init(); io_port_init(); + parse_early_param(); + #ifdef CONFIG_IA64_GENERIC - { - const char *mvec_name = strstr (*cmdline_p, "machvec="); - char str[64]; - - if (mvec_name) { - const char *end; - size_t len; - - mvec_name += 8; - end = strchr (mvec_name, ' '); - if (end) - len = end - mvec_name; - else - len = strlen (mvec_name); - len = min(len, sizeof (str) - 1); - strncpy (str, mvec_name, len); - str[len] = '\0'; - mvec_name = str; - } else - mvec_name = acpi_get_sysname(); - machvec_init(mvec_name); - } + machvec_init(NULL); #endif if (early_console_setup(*cmdline_p) == 0) mark_bsp_online(); - parse_early_param(); #ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); @@ -445,7 +434,7 @@ setup_arch (char **cmdline_p) find_memory(); /* process SAL system table: */ - ia64_sal_init(efi.sal_systab); + ia64_sal_init(__va(efi.sal_systab)); ia64_setup_printk_clock(); @@ -492,7 +481,7 @@ setup_arch (char **cmdline_p) #endif /* enable IA-64 Machine Check Abort Handling unless disabled */ - if (!strstr(saved_command_line, "nomca")) + if (!nomca) ia64_mca_init(); platform_setup(cmdline_p); @@ -622,7 +611,7 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo }; -void +static void __cpuinit identify_cpu (struct cpuinfo_ia64 *c) { union { @@ -699,7 +688,7 @@ setup_per_cpu_areas (void) * In addition, the minimum of the i-cache stride sizes is calculated for * "flush_icache_range()". */ -static void +static void __cpuinit get_max_cacheline_size (void) { unsigned long line_size, max = 1; @@ -762,10 +751,10 @@ get_max_cacheline_size (void) * cpu_init() initializes state that is per-CPU. This function acts * as a 'CPU state barrier', nothing should get across. */ -void +void __cpuinit cpu_init (void) { - extern void __devinit ia64_mmu_init (void *); + extern void __cpuinit ia64_mmu_init (void *); unsigned long num_phys_stacked; pal_vm_info_2_u_t vmi; unsigned int max_ctx; @@ -893,9 +882,16 @@ void sched_cacheflush(void) ia64_sal_cache_flush(3); } -void +void __init check_bugs (void) { ia64_patch_mckinley_e9((unsigned long) __start___mckinley_e9_bundles, (unsigned long) __end___mckinley_e9_bundles); } + +static int __init run_dmi_scan(void) +{ + dmi_scan_machine(); + return 0; +} +core_initcall(run_dmi_scan); diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index c4b633b36da..44e9547878a 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -624,32 +624,8 @@ void __devinit smp_prepare_boot_cpu(void) per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; } -/* - * mt_info[] is a temporary store for all info returned by - * PAL_LOGICAL_TO_PHYSICAL, to be copied into cpuinfo_ia64 when the - * specific cpu comes. - */ -static struct { - __u32 socket_id; - __u16 core_id; - __u16 thread_id; - __u16 proc_fixed_addr; - __u8 valid; -} mt_info[NR_CPUS] __devinitdata; - #ifdef CONFIG_HOTPLUG_CPU static inline void -remove_from_mtinfo(int cpu) -{ - int i; - - for_each_cpu(i) - if (mt_info[i].valid && mt_info[i].socket_id == - cpu_data(cpu)->socket_id) - mt_info[i].valid = 0; -} - -static inline void clear_cpu_sibling_map(int cpu) { int i; @@ -678,12 +654,6 @@ remove_siblinginfo(int cpu) /* remove it from all sibling map's */ clear_cpu_sibling_map(cpu); - - /* if this cpu is the last in the core group, remove all its info - * from mt_info structure - */ - if (last) - remove_from_mtinfo(cpu); } extern void fixup_irqs(void); @@ -878,40 +848,6 @@ init_smp_config(void) ia64_sal_strerror(sal_ret)); } -static inline int __devinit -check_for_mtinfo_index(void) -{ - int i; - - for_each_cpu(i) - if (!mt_info[i].valid) - return i; - - return -1; -} - -/* - * Search the mt_info to find out if this socket's cid/tid information is - * cached or not. If the socket exists, fill in the core_id and thread_id - * in cpuinfo - */ -static int __devinit -check_for_new_socket(__u16 logical_address, struct cpuinfo_ia64 *c) -{ - int i; - __u32 sid = c->socket_id; - - for_each_cpu(i) { - if (mt_info[i].valid && mt_info[i].proc_fixed_addr == logical_address - && mt_info[i].socket_id == sid) { - c->core_id = mt_info[i].core_id; - c->thread_id = mt_info[i].thread_id; - return 1; /* not a new socket */ - } - } - return 0; -} - /* * identify_siblings(cpu) gets called from identify_cpu. This populates the * information related to logical execution units in per_cpu_data structure. @@ -921,14 +857,12 @@ identify_siblings(struct cpuinfo_ia64 *c) { s64 status; u16 pltid; - u64 proc_fixed_addr; - int count, i; pal_logical_to_physical_t info; if (smp_num_cpucores == 1 && smp_num_siblings == 1) return; - if ((status = ia64_pal_logical_to_phys(0, &info)) != PAL_STATUS_SUCCESS) { + if ((status = ia64_pal_logical_to_phys(-1, &info)) != PAL_STATUS_SUCCESS) { printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n", status); return; @@ -937,47 +871,12 @@ identify_siblings(struct cpuinfo_ia64 *c) printk(KERN_ERR "ia64_sal_pltid failed with %ld\n", status); return; } - if ((status = ia64_pal_fixed_addr(&proc_fixed_addr)) != PAL_STATUS_SUCCESS) { - printk(KERN_ERR "ia64_pal_fixed_addr failed with %ld\n", status); - return; - } c->socket_id = (pltid << 8) | info.overview_ppid; c->cores_per_socket = info.overview_cpp; c->threads_per_core = info.overview_tpc; - count = c->num_log = info.overview_num_log; + c->num_log = info.overview_num_log; - /* If the thread and core id information is already cached, then - * we will simply update cpu_info and return. Otherwise, we will - * do the PAL calls and cache core and thread id's of all the siblings. - */ - if (check_for_new_socket(proc_fixed_addr, c)) - return; - - for (i = 0; i < count; i++) { - int index; - - if (i && (status = ia64_pal_logical_to_phys(i, &info)) - != PAL_STATUS_SUCCESS) { - printk(KERN_ERR "ia64_pal_logical_to_phys failed" - " with %ld\n", status); - return; - } - if (info.log2_la == proc_fixed_addr) { - c->core_id = info.log1_cid; - c->thread_id = info.log1_tid; - } - - index = check_for_mtinfo_index(); - /* We will not do the mt_info caching optimization in this case. - */ - if (index < 0) - continue; - - mt_info[index].valid = 1; - mt_info[index].socket_id = c->socket_id; - mt_info[index].core_id = info.log1_cid; - mt_info[index].thread_id = info.log1_tid; - mt_info[index].proc_fixed_addr = info.log2_la; - } + c->core_id = info.log1_cid; + c->thread_id = info.log1_tid; } diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index dabd6c32641..7c1ddc8ac44 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -30,19 +30,19 @@ extern spinlock_t timerlist_lock; fpswa_interface_t *fpswa_interface; EXPORT_SYMBOL(fpswa_interface); -struct notifier_block *ia64die_chain; +ATOMIC_NOTIFIER_HEAD(ia64die_chain); int register_die_notifier(struct notifier_block *nb) { - return notifier_chain_register(&ia64die_chain, nb); + return atomic_notifier_chain_register(&ia64die_chain, nb); } EXPORT_SYMBOL_GPL(register_die_notifier); int unregister_die_notifier(struct notifier_block *nb) { - return notifier_chain_unregister(&ia64die_chain, nb); + return atomic_notifier_chain_unregister(&ia64die_chain, nb); } EXPORT_SYMBOL_GPL(unregister_die_notifier); diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 73af6267d2e..0b9e56dd7f0 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -70,34 +70,9 @@ SECTIONS __stop___ex_table = .; } - .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET) - { - __start___vtop_patchlist = .; - *(.data.patch.vtop) - __end___vtop_patchlist = .; - } - - .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET) - { - __start___mckinley_e9_bundles = .; - *(.data.patch.mckinley_e9) - __end___mckinley_e9_bundles = .; - } - /* Global data */ _data = .; -#if defined(CONFIG_IA64_GENERIC) - /* Machine Vector */ - . = ALIGN(16); - .machvec : AT(ADDR(.machvec) - LOAD_OFFSET) - { - machvec_start = .; - *(.machvec) - machvec_end = .; - } -#endif - /* Unwind info & table: */ . = ALIGN(8); .IA_64.unwind_info : AT(ADDR(.IA_64.unwind_info) - LOAD_OFFSET) @@ -154,6 +129,41 @@ SECTIONS *(.initcall7.init) __initcall_end = .; } + + /* MCA table */ + . = ALIGN(16); + __mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET) + { + __start___mca_table = .; + *(__mca_table) + __stop___mca_table = .; + } + + .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET) + { + __start___vtop_patchlist = .; + *(.data.patch.vtop) + __end___vtop_patchlist = .; + } + + .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET) + { + __start___mckinley_e9_bundles = .; + *(.data.patch.mckinley_e9) + __end___mckinley_e9_bundles = .; + } + +#if defined(CONFIG_IA64_GENERIC) + /* Machine Vector */ + . = ALIGN(16); + .machvec : AT(ADDR(.machvec) - LOAD_OFFSET) + { + machvec_start = .; + *(.machvec) + machvec_end = .; + } +#endif + __con_initcall_start = .; .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { *(.con_initcall.init) } diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile index ac64664a180..d8536a2c22a 100644 --- a/arch/ia64/lib/Makefile +++ b/arch/ia64/lib/Makefile @@ -6,7 +6,7 @@ obj-y := io.o lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \ __divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \ - bitop.o checksum.o clear_page.o csum_partial_copy.o \ + checksum.o clear_page.o csum_partial_copy.o \ clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o \ flush.o ip_fast_csum.o do_csum.o \ memset.o strlen.o diff --git a/arch/ia64/lib/bitop.c b/arch/ia64/lib/bitop.c deleted file mode 100644 index 82e299c8464..00000000000 --- a/arch/ia64/lib/bitop.c +++ /dev/null @@ -1,88 +0,0 @@ -#include <linux/compiler.h> -#include <linux/types.h> -#include <asm/intrinsics.h> -#include <linux/module.h> -#include <linux/bitops.h> - -/* - * Find next zero bit in a bitmap reasonably efficiently.. - */ - -int __find_next_zero_bit (const void *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = ((unsigned long *) addr) + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if (offset) { - tmp = *(p++); - tmp |= ~0UL >> (64-offset); - if (size < 64) - goto found_first; - if (~tmp) - goto found_middle; - size -= 64; - result += 64; - } - while (size & ~63UL) { - if (~(tmp = *(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if (!size) - return result; - tmp = *p; -found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* any bits zero? */ - return result + size; /* nope */ -found_middle: - return result + ffz(tmp); -} -EXPORT_SYMBOL(__find_next_zero_bit); - -/* - * Find next bit in a bitmap reasonably efficiently.. - */ -int __find_next_bit(const void *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = ((unsigned long *) addr) + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if (offset) { - tmp = *(p++); - tmp &= ~0UL << offset; - if (size < 64) - goto found_first; - if (tmp) - goto found_middle; - size -= 64; - result += 64; - } - while (size & ~63UL) { - if ((tmp = *(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if (!size) - return result; - tmp = *p; - found_first: - tmp &= ~0UL >> (64-size); - if (tmp == 0UL) /* Are any bits set? */ - return result + size; /* Nope. */ - found_middle: - return result + __ffs(tmp); -} -EXPORT_SYMBOL(__find_next_bit); diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile index d78d20f0a0f..bb0a01a8187 100644 --- a/arch/ia64/mm/Makefile +++ b/arch/ia64/mm/Makefile @@ -2,7 +2,7 @@ # Makefile for the ia64-specific parts of the memory manager. # -obj-y := init.o fault.o tlb.o extable.o +obj-y := init.o fault.o tlb.o extable.o ioremap.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_NUMA) += numa.o diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 9855ba31809..84fd1c14c8a 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -97,7 +97,7 @@ find_max_pfn (unsigned long start, unsigned long end, void *arg) * Find a place to put the bootmap and return its starting address in * bootmap_start. This address must be page-aligned. */ -int +static int __init find_bootmap_location (unsigned long start, unsigned long end, void *arg) { unsigned long needed = *(unsigned long *)arg; @@ -141,7 +141,7 @@ find_bootmap_location (unsigned long start, unsigned long end, void *arg) * Walk the EFI memory map and find usable memory for the system, taking * into account reserved areas. */ -void +void __init find_memory (void) { unsigned long bootmap_size; @@ -176,7 +176,7 @@ find_memory (void) * * Allocate and setup per-cpu data areas. */ -void * +void * __cpuinit per_cpu_init (void) { void *cpu_data; @@ -228,7 +228,7 @@ count_dma_pages (u64 start, u64 end, void *arg) * Set up the page tables. */ -void +void __init paging_init (void) { unsigned long max_dma; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 573d5cc63e2..ec9eeb89975 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -379,31 +379,6 @@ static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize) } /** - * pgdat_insert - insert the pgdat into global pgdat_list - * @pgdat: the pgdat for a node. - */ -static void __init pgdat_insert(pg_data_t *pgdat) -{ - pg_data_t *prev = NULL, *next; - - for_each_pgdat(next) - if (pgdat->node_id < next->node_id) - break; - else - prev = next; - - if (prev) { - prev->pgdat_next = pgdat; - pgdat->pgdat_next = next; - } else { - pgdat->pgdat_next = pgdat_list; - pgdat_list = pgdat; - } - - return; -} - -/** * memory_less_nodes - allocate and initialize CPU only nodes pernode * information. */ @@ -525,7 +500,7 @@ void __init find_memory(void) * find_pernode_space() does most of this already, we just need to set * local_per_cpu_offset */ -void *per_cpu_init(void) +void __cpuinit *per_cpu_init(void) { int cpu; static int first_time = 1; @@ -560,7 +535,7 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { unsigned long present; unsigned long flags; int shared = 0, cached = 0, reserved = 0; @@ -745,11 +720,5 @@ void __init paging_init(void) pfn_offset, zholes_size); } - /* - * Make memory less nodes become a member of the known nodes. - */ - for_each_node_mask(node, memory_less_mask) - pgdat_insert(mem_data[node].pgdat); - zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page)); } diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index 9dbc7dadd16..8d506710fdb 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -113,8 +113,7 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb, unsigned long floor, unsigned long ceiling) { /* - * This is called only when is_hugepage_only_range(addr,), - * and it follows that is_hugepage_only_range(end,) also. + * This is called to free hugetlb page tables. * * The offset of these addresses from the base of the hugetlb * region must be scaled down by HPAGE_SIZE/PAGE_SIZE so that @@ -126,9 +125,9 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb, addr = htlbpage_to_page(addr); end = htlbpage_to_page(end); - if (is_hugepage_only_range(tlb->mm, floor, HPAGE_SIZE)) + if (REGION_NUMBER(floor) == RGN_HPAGE) floor = htlbpage_to_page(floor); - if (is_hugepage_only_range(tlb->mm, ceiling, HPAGE_SIZE)) + if (REGION_NUMBER(ceiling) == RGN_HPAGE) ceiling = htlbpage_to_page(ceiling); free_pgd_range(tlb, addr, end, floor, ceiling); diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 08d94e6bfa1..2ef1151cde9 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -206,7 +206,7 @@ free_initmem (void) (__init_end - __init_begin) >> 10); } -void +void __init free_initrd_mem (unsigned long start, unsigned long end) { struct page *page; @@ -261,7 +261,7 @@ free_initrd_mem (unsigned long start, unsigned long end) /* * This installs a clean page in the kernel's page table. */ -struct page * +static struct page * __init put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot) { pgd_t *pgd; @@ -294,7 +294,7 @@ put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot) return page; } -static void +static void __init setup_gate (void) { struct page *page; @@ -411,7 +411,7 @@ ia64_mmu_init (void *my_cpu_data) #ifdef CONFIG_VIRTUAL_MEM_MAP -int +int __init create_mem_map_page_table (u64 start, u64 end, void *arg) { unsigned long address, start_page, end_page; @@ -519,7 +519,7 @@ ia64_pfn_valid (unsigned long pfn) } EXPORT_SYMBOL(ia64_pfn_valid); -int +int __init find_largest_hole (u64 start, u64 end, void *arg) { u64 *max_gap = arg; @@ -535,7 +535,7 @@ find_largest_hole (u64 start, u64 end, void *arg) } #endif /* CONFIG_VIRTUAL_MEM_MAP */ -static int +static int __init count_reserved_pages (u64 start, u64 end, void *arg) { unsigned long num_reserved = 0; @@ -556,7 +556,7 @@ count_reserved_pages (u64 start, u64 end, void *arg) * purposes. */ -static int nolwsys; +static int nolwsys __initdata; static int __init nolwsys_setup (char *s) @@ -567,7 +567,7 @@ nolwsys_setup (char *s) __setup("nolwsys", nolwsys_setup); -void +void __init mem_init (void) { long reserved_pages, codesize, datasize, initsize; @@ -600,7 +600,7 @@ mem_init (void) kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START); kclist_add(&kcore_kernel, _stext, _end - _stext); - for_each_pgdat(pgdat) + for_each_online_pgdat(pgdat) if (pgdat->bdata->node_bootmem_map) totalram_pages += free_all_bootmem_node(pgdat); diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c new file mode 100644 index 00000000000..62328621f99 --- /dev/null +++ b/arch/ia64/mm/ioremap.c @@ -0,0 +1,43 @@ +/* + * (c) Copyright 2006 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas <bjorn.helgaas@hp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/compiler.h> +#include <linux/module.h> +#include <linux/efi.h> +#include <asm/io.h> + +static inline void __iomem * +__ioremap (unsigned long offset, unsigned long size) +{ + return (void __iomem *) (__IA64_UNCACHED_OFFSET | offset); +} + +void __iomem * +ioremap (unsigned long offset, unsigned long size) +{ + if (efi_mem_attribute_range(offset, size, EFI_MEMORY_UC)) + return __ioremap(offset, size); + + if (efi_mem_attribute_range(offset, size, EFI_MEMORY_WB)) + return phys_to_virt(offset); + + /* + * Someday this should check ACPI resources so we + * can do the right thing for hot-plugged regions. + */ + return __ioremap(offset, size); +} +EXPORT_SYMBOL(ioremap); + +void __iomem * +ioremap_nocache (unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size); +} +EXPORT_SYMBOL(ioremap_nocache); diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index dfb3f290237..5101ac46264 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -13,6 +13,8 @@ #include <asm/sn/sn_feature_sets.h> #include <asm/sn/geo.h> #include <asm/sn/io.h> +#include <asm/sn/l1.h> +#include <asm/sn/module.h> #include <asm/sn/pcibr_provider.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> @@ -710,9 +712,36 @@ cnodeid_get_geoid(cnodeid_t cnode) return hubdev->hdi_geoid; } +void sn_generate_path(struct pci_bus *pci_bus, char *address) +{ + nasid_t nasid; + cnodeid_t cnode; + geoid_t geoid; + moduleid_t moduleid; + u16 bricktype; + + nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); + cnode = nasid_to_cnodeid(nasid); + geoid = cnodeid_get_geoid(cnode); + moduleid = geo_module(geoid); + + sprintf(address, "module_%c%c%c%c%.2d", + '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)), + '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)), + '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)), + MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid)); + + /* Tollhouse requires slot id to be displayed */ + bricktype = MODULE_GET_BTYPE(moduleid); + if ((bricktype == L1_BRICKTYPE_191010) || + (bricktype == L1_BRICKTYPE_1932)) + sprintf(address, "%s^%d", address, geo_slot(geoid)); +} + subsys_initcall(sn_pci_init); EXPORT_SYMBOL(sn_pci_fixup_slot); EXPORT_SYMBOL(sn_pci_unfixup_slot); EXPORT_SYMBOL(sn_pci_controller_fixup); EXPORT_SYMBOL(sn_bus_store_sysdata); EXPORT_SYMBOL(sn_bus_free_sysdata); +EXPORT_SYMBOL(sn_generate_path); diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index c373113d073..c265e02f503 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -350,9 +350,6 @@ static void force_interrupt(int irq) static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) { u64 regval; - int irr_reg_num; - int irr_bit; - u64 irr_reg; struct pcidev_info *pcidev_info; struct pcibus_info *pcibus_info; @@ -373,23 +370,7 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) pdi_pcibus_info; regval = pcireg_intr_status_get(pcibus_info); - irr_reg_num = irq_to_vector(irq) / 64; - irr_bit = irq_to_vector(irq) % 64; - switch (irr_reg_num) { - case 0: - irr_reg = ia64_getreg(_IA64_REG_CR_IRR0); - break; - case 1: - irr_reg = ia64_getreg(_IA64_REG_CR_IRR1); - break; - case 2: - irr_reg = ia64_getreg(_IA64_REG_CR_IRR2); - break; - case 3: - irr_reg = ia64_getreg(_IA64_REG_CR_IRR3); - break; - } - if (!test_bit(irr_bit, &irr_reg)) { + if (!ia64_get_irr(irq_to_vector(irq))) { if (!test_bit(irq, pda->sn_in_service_ivecs)) { regval &= 0xff; if (sn_irq_info->irq_int_bit & regval & diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 8b6d5c84470..30988dfbddf 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -327,10 +327,11 @@ sn_scan_pcdp(void) struct pcdp_interface_pci if_pci; extern struct efi efi; - pcdp = efi.hcdp; - if (! pcdp) + if (efi.hcdp == EFI_INVALID_TABLE_ADDR) return; /* no hcdp/pcdp table */ + pcdp = __va(efi.hcdp); + if (pcdp->rev < 3) return; /* only support PCDP (rev >= 3) */ diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c index c686d9c12f7..5100261310f 100644 --- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c +++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c @@ -93,19 +93,22 @@ static int coherence_id_open(struct inode *inode, struct file *file) static struct proc_dir_entry *sn_procfs_create_entry(const char *name, struct proc_dir_entry *parent, int (*openfunc)(struct inode *, struct file *), - int (*releasefunc)(struct inode *, struct file *)) + int (*releasefunc)(struct inode *, struct file *), + ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *)) { struct proc_dir_entry *e = create_proc_entry(name, 0444, parent); if (e) { - e->proc_fops = (struct file_operations *)kmalloc( - sizeof(struct file_operations), GFP_KERNEL); - if (e->proc_fops) { - memset(e->proc_fops, 0, sizeof(struct file_operations)); - e->proc_fops->open = openfunc; - e->proc_fops->read = seq_read; - e->proc_fops->llseek = seq_lseek; - e->proc_fops->release = releasefunc; + struct file_operations *f; + + f = kzalloc(sizeof(*f), GFP_KERNEL); + if (f) { + f->open = openfunc; + f->read = seq_read; + f->llseek = seq_lseek; + f->release = releasefunc; + f->write = write; + e->proc_fops = f; } } @@ -119,31 +122,29 @@ extern int sn_topology_release(struct inode *, struct file *); void register_sn_procfs(void) { static struct proc_dir_entry *sgi_proc_dir = NULL; - struct proc_dir_entry *e; BUG_ON(sgi_proc_dir != NULL); if (!(sgi_proc_dir = proc_mkdir("sgi_sn", NULL))) return; sn_procfs_create_entry("partition_id", sgi_proc_dir, - partition_id_open, single_release); + partition_id_open, single_release, NULL); sn_procfs_create_entry("system_serial_number", sgi_proc_dir, - system_serial_number_open, single_release); + system_serial_number_open, single_release, NULL); sn_procfs_create_entry("licenseID", sgi_proc_dir, - licenseID_open, single_release); + licenseID_open, single_release, NULL); - e = sn_procfs_create_entry("sn_force_interrupt", sgi_proc_dir, - sn_force_interrupt_open, single_release); - if (e) - e->proc_fops->write = sn_force_interrupt_write_proc; + sn_procfs_create_entry("sn_force_interrupt", sgi_proc_dir, + sn_force_interrupt_open, single_release, + sn_force_interrupt_write_proc); sn_procfs_create_entry("coherence_id", sgi_proc_dir, - coherence_id_open, single_release); + coherence_id_open, single_release, NULL); sn_procfs_create_entry("sn_topology", sgi_proc_dir, - sn_topology_open, sn_topology_release); + sn_topology_open, sn_topology_release, NULL); } #endif /* CONFIG_PROC_FS */ diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 99cb28e7429..feaf1a6e810 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -369,9 +369,15 @@ static void tio_corelet_reset(nasid_t nasid, int corelet) static int is_fpga_tio(int nasid, int *bt) { - int ioboard_type; + u16 ioboard_type; + s64 rc; - ioboard_type = ia64_sn_sysctl_ioboard_get(nasid); + rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard_type); + if (rc) { + printk(KERN_WARNING "ia64_sn_sysctl_ioboard_get failed: %ld\n", + rc); + return 0; + } switch (ioboard_type) { case L1_BRICKTYPE_SA: diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 98f716bd92f..ab1211ef017 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -74,6 +74,22 @@ static int sal_pcibr_error_interrupt(struct pcibus_info *soft) return (int)ret_stuff.v0; } +u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus) +{ + s64 rc; + u16 ioboard; + nasid_t nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); + + rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard); + if (rc) { + printk(KERN_WARNING "ia64_sn_sysctl_ioboard_get failed: %ld\n", + rc); + return 0; + } + + return ioboard; +} + /* * PCI Bridge Error interrupt handler. Gets invoked whenever a PCI * bridge sends an error interrupt. @@ -255,3 +271,4 @@ pcibr_init_provider(void) EXPORT_SYMBOL_GPL(sal_pcibr_slot_enable); EXPORT_SYMBOL_GPL(sal_pcibr_slot_disable); +EXPORT_SYMBOL_GPL(sn_ioboard_to_pci_bus); diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index a3dcc3fab4b..05c864c6c2d 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -214,6 +214,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default n +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/m32r/Kconfig.debug b/arch/m32r/Kconfig.debug index bbf711bab69..2e1019ddbb2 100644 --- a/arch/m32r/Kconfig.debug +++ b/arch/m32r/Kconfig.debug @@ -19,7 +19,7 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. config DEBUG_PAGEALLOC - bool "Page alloc debugging" + bool "Debug page memory allocations" depends on DEBUG_KERNEL && BROKEN help Unmap pages from the kernel linear mapping after free_pages(). diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile index 4b3c90ba926..f219c47d334 100644 --- a/arch/m32r/Makefile +++ b/arch/m32r/Makefile @@ -1,6 +1,9 @@ # # m32r/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# LDFLAGS := OBJCOPYFLAGS := -O binary -R .note -R .comment -S @@ -39,7 +42,7 @@ drivers-$(CONFIG_OPROFILE) += arch/m32r/oprofile/ boot := arch/m32r/boot -.PHONY: zImage +PHONY += zImage all: zImage diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c index d742037a7cc..0d78942b4c7 100644 --- a/arch/m32r/kernel/setup.c +++ b/arch/m32r/kernel/setup.c @@ -24,6 +24,7 @@ #include <linux/tty.h> #include <linux/cpu.h> #include <linux/nodemask.h> +#include <linux/pfn.h> #include <asm/processor.h> #include <asm/pgtable.h> diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c index 08e72795555..cf610a7c5ff 100644 --- a/arch/m32r/mm/discontig.c +++ b/arch/m32r/mm/discontig.c @@ -13,6 +13,7 @@ #include <linux/initrd.h> #include <linux/nodemask.h> #include <linux/module.h> +#include <linux/pfn.h> #include <asm/setup.h> @@ -137,12 +138,6 @@ unsigned long __init zone_sizes_init(void) int nid, i; mem_prof_t *mp; - pgdat_list = NULL; - for (nid = num_online_nodes() - 1 ; nid >= 0 ; nid--) { - NODE_DATA(nid)->pgdat_next = pgdat_list; - pgdat_list = NODE_DATA(nid); - } - for_each_online_node(nid) { mp = &mem_prof[nid]; for (i = 0 ; i < MAX_NR_ZONES ; i++) { diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c index c9e7dad860b..b71348fec1f 100644 --- a/arch/m32r/mm/init.c +++ b/arch/m32r/mm/init.c @@ -18,6 +18,7 @@ #include <linux/highmem.h> #include <linux/bitops.h> #include <linux/nodemask.h> +#include <linux/pfn.h> #include <asm/types.h> #include <asm/processor.h> #include <asm/page.h> @@ -47,7 +48,7 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { unsigned long flags; pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; ++i) { diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 8849439e88d..805b81fedf8 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -17,6 +17,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c index 3ffc84f9c29..c90cb5fcc8e 100644 --- a/arch/m68k/bvme6000/config.c +++ b/arch/m68k/bvme6000/config.c @@ -142,7 +142,7 @@ void __init config_bvme6000(void) /* Now do the PIT configuration */ pit->pgcr = 0x00; /* Unidirectional 8 bit, no handshake for now */ - pit->psrr = 0x18; /* PIACK and PIRQ fucntions enabled */ + pit->psrr = 0x18; /* PIACK and PIRQ functions enabled */ pit->pacr = 0x00; /* Sub Mode 00, H2 i/p, no DMA */ pit->padr = 0x00; /* Just to be tidy! */ pit->paddr = 0x00; /* All inputs for now (safest) */ diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c index a69fe3048ed..b0e4c084df8 100644 --- a/arch/m68k/mvme16x/rtc.c +++ b/arch/m68k/mvme16x/rtc.c @@ -17,6 +17,7 @@ #include <linux/poll.h> #include <linux/mc146818rtc.h> /* For struct rtc_time and ioctls, etc */ #include <linux/smp_lock.h> +#include <linux/bcd.h> #include <asm/mvme16xhw.h> #include <asm/io.h> @@ -31,9 +32,6 @@ * ioctls. */ -#define BCD2BIN(val) (((val)&15) + ((val)>>4)*10) -#define BIN2BCD(val) ((((val)/10)<<4) + (val)%10) - static const unsigned char days_in_mo[] = {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index e50858dbc23..3cde6822ead 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -25,6 +25,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default n +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ac2012f033d..5080ea1799a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -801,6 +801,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 1080558c810..307e98c29dd 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -94,7 +94,7 @@ void __init plat_setup(void) argptr = prom_getcmdline(); -#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) +#ifdef CONFIG_SERIAL_8250_CONSOLE if ((argptr = strstr(argptr, "console=")) == NULL) { argptr = prom_getcmdline(); strcat(argptr, " console=ttyS0,115200"); diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c index 995896ac0e3..5dc34daa715 100644 --- a/arch/mips/ddb5xxx/common/rtc_ds1386.c +++ b/arch/mips/ddb5xxx/common/rtc_ds1386.c @@ -165,6 +165,6 @@ rtc_ds1386_init(unsigned long base) WRITE_RTC(0xB, byte); /* set the function pointers */ - rtc_get_time = rtc_ds1386_get_time; - rtc_set_time = rtc_ds1386_set_time; + rtc_mips_get_time = rtc_ds1386_get_time; + rtc_mips_set_time = rtc_ds1386_set_time; } diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 17482234413..74cb055d4bf 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -36,41 +36,13 @@ #include <asm/dec/ioasic_addrs.h> #include <asm/dec/machtype.h> - -/* - * Returns true if a clock update is in progress - */ -static inline unsigned char dec_rtc_is_updating(void) -{ - unsigned char uip; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP); - spin_unlock_irqrestore(&rtc_lock, flags); - return uip; -} - static unsigned long dec_rtc_get_time(void) { unsigned int year, mon, day, hour, min, sec, real_year; - int i; unsigned long flags; - /* The Linux interpretation of the DS1287 clock register contents: - * When the Update-In-Progress (UIP) flag goes from 1 to 0, the - * RTC registers show the second which has precisely just started. - * Let's hope other operating systems interpret the RTC the same way. - */ - /* read RTC exactly on falling edge of update flag */ - for (i = 0; i < 1000000; i++) /* may take up to 1 second... */ - if (dec_rtc_is_updating()) - break; - for (i = 0; i < 1000000; i++) /* must try at least 2.228 ms */ - if (!dec_rtc_is_updating()) - break; spin_lock_irqsave(&rtc_lock, flags); - /* Isn't this overkill? UIP above should guarantee consistency */ + do { sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES); @@ -78,7 +50,16 @@ static unsigned long dec_rtc_get_time(void) day = CMOS_READ(RTC_DAY_OF_MONTH); mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); + /* + * The PROM will reset the year to either '72 or '73. + * Therefore we store the real year separately, in one + * of unused BBU RAM locations. + */ + real_year = CMOS_READ(RTC_DEC_YEAR); } while (sec != CMOS_READ(RTC_SECONDS)); + + spin_unlock_irqrestore(&rtc_lock, flags); + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { sec = BCD2BIN(sec); min = BCD2BIN(min); @@ -87,13 +68,7 @@ static unsigned long dec_rtc_get_time(void) mon = BCD2BIN(mon); year = BCD2BIN(year); } - /* - * The PROM will reset the year to either '72 or '73. - * Therefore we store the real year separately, in one - * of unused BBU RAM locations. - */ - real_year = CMOS_READ(RTC_DEC_YEAR); - spin_unlock_irqrestore(&rtc_lock, flags); + year += real_year - 72 + 2000; return mktime(year, mon, day, hour, min, sec); @@ -193,8 +168,8 @@ static void dec_ioasic_hpt_init(unsigned int count) void __init dec_time_init(void) { - rtc_get_time = dec_rtc_get_time; - rtc_set_mmss = dec_rtc_set_mmss; + rtc_mips_get_time = dec_rtc_get_time; + rtc_mips_set_mmss = dec_rtc_set_mmss; mips_timer_state = dec_timer_state; mips_timer_ack = dec_timer_ack; diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c index f5d67ee21ac..b79817bb6cc 100644 --- a/arch/mips/ite-boards/generic/time.c +++ b/arch/mips/ite-boards/generic/time.c @@ -227,8 +227,8 @@ void __init it8172_time_init(void) local_irq_restore(flags); - rtc_get_time = it8172_rtc_get_time; - rtc_set_time = it8172_rtc_set_time; + rtc_mips_get_time = it8172_rtc_get_time; + rtc_mips_set_time = it8172_rtc_set_time; } #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) diff --git a/arch/mips/ite-boards/ivr/init.c b/arch/mips/ite-boards/ivr/init.c index ea4e1935fec..b774db035b3 100644 --- a/arch/mips/ite-boards/ivr/init.c +++ b/arch/mips/ite-boards/ivr/init.c @@ -45,9 +45,6 @@ extern void __init prom_init_cmdline(void); extern unsigned long __init prom_get_memsize(void); extern void __init it8172_init_ram_resource(unsigned long memsize); -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - const char *get_system_type(void) { return "Globespan IVR"; diff --git a/arch/mips/ite-boards/qed-4n-s01b/init.c b/arch/mips/ite-boards/qed-4n-s01b/init.c index 56dca7e0c21..e8ec8be66a8 100644 --- a/arch/mips/ite-boards/qed-4n-s01b/init.c +++ b/arch/mips/ite-boards/qed-4n-s01b/init.c @@ -45,9 +45,6 @@ extern void __init prom_init_cmdline(void); extern unsigned long __init prom_get_memsize(void); extern void __init it8172_init_ram_resource(unsigned long memsize); -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - const char *get_system_type(void) { return "ITE QED-4N-S01B"; diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index 9a8bff153d8..a6bd3f4d304 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -159,8 +159,8 @@ rtc_ds1742_init(unsigned long base) db_assert((rtc_base & 0xe0000000) == KSEG1); /* set the function pointers */ - rtc_get_time = rtc_ds1742_get_time; - rtc_set_time = rtc_ds1742_set_time; + rtc_mips_get_time = rtc_ds1742_get_time; + rtc_mips_set_time = rtc_ds1742_set_time; /* clear oscillator stop bit */ CMOS_WRITE(RTC_READ, RTC_CONTROL); diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 08273a2a501..8150f071f80 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -603,7 +603,7 @@ repeat: /* move to end of parent's list to avoid starvation */ write_lock_irq(&tasklist_lock); remove_parent(p); - add_parent(p, p->parent); + add_parent(p); write_unlock_irq(&tasklist_lock); retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0; if (retval) @@ -643,7 +643,7 @@ repeat: write_lock_irq(&tasklist_lock); remove_parent(p); p->parent = p->real_parent; - add_parent(p, p->parent); + add_parent(p); do_notify_parent(p, SIGCHLD); write_unlock_irq(&tasklist_lock); } else diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 013bc93688e..3f40c37a9ee 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -30,7 +30,6 @@ #include <linux/utime.h> #include <linux/utsname.h> #include <linux/personality.h> -#include <linux/timex.h> #include <linux/dnotify.h> #include <linux/module.h> #include <linux/binfmts.h> @@ -1157,79 +1156,6 @@ out: return err; } -/* Handle adjtimex compatibility. */ - -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - -extern int do_adjtimex(struct timex *); - -asmlinkage int sys32_adjtimex(struct timex32 __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if (get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if (put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) { diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 02c8267e45e..05a2c0567da 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -273,7 +273,7 @@ EXPORT(sysn32_call_table) PTR sys_pivot_root PTR sys32_sysctl PTR sys_prctl - PTR sys32_adjtimex + PTR compat_sys_adjtimex PTR compat_sys_setrlimit /* 6155 */ PTR sys_chroot PTR sys_sync diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 797e0d87488..19c4ca481b0 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -328,7 +328,7 @@ sys_call_table: PTR sys_setdomainname PTR sys32_newuname PTR sys_ni_syscall /* sys_modify_ldt */ - PTR sys32_adjtimex + PTR compat_sys_adjtimex PTR sys_mprotect /* 4125 */ PTR compat_sys_sigprocmask PTR sys_ni_syscall /* was creat_module */ diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 0cb3b6097e0..dcbfd27071f 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -34,6 +34,7 @@ #include <linux/highmem.h> #include <linux/console.h> #include <linux/mmzone.h> +#include <linux/pfn.h> #include <asm/addrspace.h> #include <asm/bootinfo.h> @@ -257,10 +258,6 @@ static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_en return 0; } -#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - #define MAXMEM HIGHMEM_START #define MAXMEM_PFN PFN_DOWN(MAXMEM) @@ -493,10 +490,6 @@ static inline void resource_init(void) } } -#undef PFN_UP -#undef PFN_DOWN -#undef PFN_PHYS - #undef MAXMEM #undef MAXMEM_PFN diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index 0fc3730a294..5407b784cd0 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -645,27 +645,7 @@ static inline void getitimer_real(struct itimerval *value) asmlinkage unsigned int irix_alarm(unsigned int seconds) { - struct itimerval it_new, it_old; - unsigned int oldalarm; - - if (!seconds) { - getitimer_real(&it_old); - del_timer(¤t->real_timer); - } else { - it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0; - it_new.it_value.tv_sec = seconds; - it_new.it_value.tv_usec = 0; - do_setitimer(ITIMER_REAL, &it_new, &it_old); - } - oldalarm = it_old.it_value.tv_sec; - /* - * ehhh.. We can't return 0 if we have an alarm pending ... - * And we'd better return too much than too little anyway - */ - if (it_old.it_value.tv_usec) - oldalarm++; - - return oldalarm; + return alarm_setitimer(seconds); } asmlinkage int irix_pause(void) diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 51273b7297a..5e51a2d8f3f 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -65,9 +65,9 @@ static int null_rtc_set_time(unsigned long sec) return 0; } -unsigned long (*rtc_get_time)(void) = null_rtc_get_time; -int (*rtc_set_time)(unsigned long) = null_rtc_set_time; -int (*rtc_set_mmss)(unsigned long); +unsigned long (*rtc_mips_get_time)(void) = null_rtc_get_time; +int (*rtc_mips_set_time)(unsigned long) = null_rtc_set_time; +int (*rtc_mips_set_mmss)(unsigned long); /* usecs per counter cycle, shifted to left by 32 bits */ @@ -440,14 +440,14 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* * If we have an externally synchronized Linux clock, then update - * CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be + * CMOS clock accordingly every ~11 minutes. rtc_mips_set_time() has to be * called as close as possible to 500 ms before the new second starts. */ if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { - if (rtc_set_mmss(xtime.tv_sec) == 0) { + if (rtc_mips_set_mmss(xtime.tv_sec) == 0) { last_rtc_update = xtime.tv_sec; } else { /* do it again in 60 s */ @@ -565,7 +565,7 @@ asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs) * b) (optional) calibrate and set the mips_hpt_frequency * (only needed if you intended to use fixed_rate_gettimeoffset * or use cpu counter as timer interrupt source) - * 2) setup xtime based on rtc_get_time(). + * 2) setup xtime based on rtc_mips_get_time(). * 3) choose a appropriate gettimeoffset routine. * 4) calculate a couple of cached variables for later usage * 5) board_timer_setup() - @@ -633,10 +633,10 @@ void __init time_init(void) if (board_time_init) board_time_init(); - if (!rtc_set_mmss) - rtc_set_mmss = rtc_set_time; + if (!rtc_mips_set_mmss) + rtc_mips_set_mmss = rtc_mips_set_time; - xtime.tv_sec = rtc_get_time(); + xtime.tv_sec = rtc_mips_get_time(); xtime.tv_nsec = 0; set_normalized_timespec(&wall_to_monotonic, @@ -772,8 +772,8 @@ void to_tm(unsigned long tim, struct rtc_time *tm) EXPORT_SYMBOL(rtc_lock); EXPORT_SYMBOL(to_tm); -EXPORT_SYMBOL(rtc_set_time); -EXPORT_SYMBOL(rtc_get_time); +EXPORT_SYMBOL(rtc_mips_set_time); +EXPORT_SYMBOL(rtc_mips_get_time); unsigned long long sched_clock(void) { diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index 83eb08b7a07..bb70a8240e6 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -165,7 +165,8 @@ void __init plat_setup(void) /* Set up panic notifier */ for (i = 0; i < sizeof(lasat_panic_block) / sizeof(struct notifier_block); i++) - notifier_chain_register(&panic_notifier_list, &lasat_panic_block[i]); + atomic_notifier_chain_register(&panic_notifier_list, + &lasat_panic_block[i]); lasat_reboot_setup(); @@ -174,8 +175,8 @@ void __init plat_setup(void) #ifdef CONFIG_DS1603 ds1603 = &ds_defs[mips_machtype]; - rtc_get_time = ds1603_read; - rtc_set_time = ds1603_set; + rtc_mips_get_time = ds1603_read; + rtc_mips_set_time = ds1603_set; #endif #ifdef DYNAMIC_SERIAL_INIT diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 8ff43a1c1e9..e3d5aaa90f0 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -30,12 +30,13 @@ #include <linux/string.h> #include <linux/net.h> #include <linux/inet.h> +#include <linux/mutex.h> #include <asm/uaccess.h> #include "sysctl.h" #include "ds1603.h" -static DECLARE_MUTEX(lasat_info_sem); +static DEFINE_MUTEX(lasat_info_mutex); /* Strategy function to write EEPROM after changing string entry */ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, @@ -43,17 +44,17 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, void *newval, size_t newlen, void **context) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = sysctl_string(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } if (newval && newlen) { lasat_write_eeprom_info(); } - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 1; } @@ -63,14 +64,14 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = proc_dostring(table, write, filp, buffer, lenp, ppos); if ( (!write) || r) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } lasat_write_eeprom_info(); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } @@ -79,14 +80,14 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); if ( (!write) || r) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } lasat_write_eeprom_info(); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } @@ -98,7 +99,7 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); if (!write) { rtctmp = ds1603_read(); /* check for time < 0 and set to 0 */ @@ -107,11 +108,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, } r = proc_dointvec(table, write, filp, buffer, lenp, ppos); if ( (!write) || r) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } ds1603_set(rtctmp); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } #endif @@ -122,16 +123,16 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen, void *newval, size_t newlen, void **context) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } if (newval && newlen) { lasat_write_eeprom_info(); } - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 1; } @@ -142,19 +143,19 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen, void *newval, size_t newlen, void **context) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); rtctmp = ds1603_read(); if (rtctmp < 0) rtctmp = 0; r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } if (newval && newlen) { ds1603_set(rtctmp); } - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 1; } #endif @@ -192,13 +193,13 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, return 0; } - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); if (write) { len = 0; p = buffer; while (len < *lenp) { if(get_user(c, p++)) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return -EFAULT; } if (c == 0 || c == '\n') @@ -209,7 +210,7 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, len = sizeof(proc_lasat_ipbuf) - 1; if (copy_from_user(proc_lasat_ipbuf, buffer, len)) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return -EFAULT; } proc_lasat_ipbuf[len] = 0; @@ -230,12 +231,12 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, len = *lenp; if (len) if(copy_to_user(buffer, proc_lasat_ipbuf, len)) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return -EFAULT; } if (len < *lenp) { if(put_user('\n', ((char *) buffer) + len)) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return -EFAULT; } len++; @@ -244,7 +245,7 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, *ppos += len; } update_bcastaddr(); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } #endif /* defined(CONFIG_INET) */ @@ -256,10 +257,10 @@ static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } @@ -271,7 +272,7 @@ static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, lasat_write_eeprom_info(); lasat_init_board_info(); } - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } @@ -280,10 +281,10 @@ int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); if ( (!write) || r) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } if (filp && filp->f_dentry) @@ -294,7 +295,7 @@ int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, lasat_board_info.li_eeprom_info.debugaccess = lasat_board_info.li_debugaccess; } lasat_write_eeprom_info(); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c index 873cf3141a3..c20d401ecf8 100644 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ b/arch/mips/mips-boards/atlas/atlas_setup.c @@ -65,7 +65,7 @@ void __init plat_setup(void) board_time_init = mips_time_init; board_timer_setup = mips_timer_setup; - rtc_get_time = mips_rtc_get_time; + rtc_mips_get_time = mips_rtc_get_time; } static void __init serial_init(void) diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index ee5e70c95cf..32c9210373a 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -49,9 +49,6 @@ static char *mtypes[3] = { /* References to section boundaries */ extern char _end; -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - - struct prom_pmemblock * __init prom_getmdesc(void) { char *memsize_str; @@ -109,10 +106,10 @@ struct prom_pmemblock * __init prom_getmdesc(void) mdesc[3].type = yamon_dontuse; mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[3].base; + mdesc[3].size = CPHYSADDR(PAGE_ALIGN(&_end)) - mdesc[3].base; mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); + mdesc[4].base = CPHYSADDR(PAGE_ALIGN(&_end)); mdesc[4].size = memsize - mdesc[4].base; return &mdesc[0]; diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index 2209e8a9de3..b8488aab6df 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -225,5 +225,5 @@ void __init plat_setup(void) board_time_init = mips_time_init; board_timer_setup = mips_timer_setup; - rtc_get_time = mips_rtc_get_time; + rtc_mips_get_time = mips_rtc_get_time; } diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c index 1ec4e75656b..e57f737bab1 100644 --- a/arch/mips/mips-boards/sim/sim_mem.c +++ b/arch/mips/mips-boards/sim/sim_mem.c @@ -42,9 +42,6 @@ static char *mtypes[3] = { /* References to section boundaries */ extern char _end; -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - - struct prom_pmemblock * __init prom_getmdesc(void) { unsigned int memsize; @@ -64,10 +61,10 @@ struct prom_pmemblock * __init prom_getmdesc(void) mdesc[2].type = simmem_reserved; mdesc[2].base = 0x00100000; - mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base; + mdesc[2].size = CPHYSADDR(PAGE_ALIGN(&_end)) - mdesc[2].base; mdesc[3].type = simmem_free; - mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end)); + mdesc[3].base = CPHYSADDR(PAGE_ALIGN(&_end)); mdesc[3].size = memsize - mdesc[3].base; return &mdesc[0]; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 52f7d59fe61..ad89c442f29 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -25,6 +25,7 @@ #include <linux/highmem.h> #include <linux/swap.h> #include <linux/proc_fs.h> +#include <linux/pfn.h> #include <asm/bootinfo.h> #include <asm/cachectl.h> @@ -177,9 +178,6 @@ void __init paging_init(void) free_area_init(zones_size); } -#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) - static inline int page_is_ram(unsigned long pagenr) { int i; diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 3784c898db1..91d9637143d 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -229,8 +229,8 @@ void momenco_time_init(void) mips_hpt_frequency = cpu_clock / 2; board_timer_setup = momenco_timer_setup; - rtc_get_time = m48t37y_get_time; - rtc_set_time = m48t37y_set_time; + rtc_mips_get_time = m48t37y_get_time; + rtc_mips_set_time = m48t37y_set_time; } static struct resource mv_pci_io_mem0_resource = { diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index f95677f4f06..370e75d0e75 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -58,6 +58,7 @@ #include <linux/bootmem.h> #include <linux/mv643xx.h> #include <linux/pm.h> +#include <linux/bcd.h> #include <asm/time.h> #include <asm/page.h> @@ -131,9 +132,6 @@ void setup_wired_tlb_entries(void) add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), (signed)0xfc000000, PM_16M); } -#define CONV_BCD_TO_BIN(val) (((val) & 0xf) + (((val) >> 4) * 10)) -#define CONV_BIN_TO_BCD(val) (((val) % 10) + (((val) / 10) << 4)) - unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; @@ -143,16 +141,16 @@ unsigned long m48t37y_get_time(void) /* stop the update */ rtc_base[0x7ff8] = 0x40; - year = CONV_BCD_TO_BIN(rtc_base[0x7fff]); - year += CONV_BCD_TO_BIN(rtc_base[0x7ff1]) * 100; + year = BCD2BIN(rtc_base[0x7fff]); + year += BCD2BIN(rtc_base[0x7ff1]) * 100; - month = CONV_BCD_TO_BIN(rtc_base[0x7ffe]); + month = BCD2BIN(rtc_base[0x7ffe]); - day = CONV_BCD_TO_BIN(rtc_base[0x7ffd]); + day = BCD2BIN(rtc_base[0x7ffd]); - hour = CONV_BCD_TO_BIN(rtc_base[0x7ffb]); - min = CONV_BCD_TO_BIN(rtc_base[0x7ffa]); - sec = CONV_BCD_TO_BIN(rtc_base[0x7ff9]); + hour = BCD2BIN(rtc_base[0x7ffb]); + min = BCD2BIN(rtc_base[0x7ffa]); + sec = BCD2BIN(rtc_base[0x7ff9]); /* start the update */ rtc_base[0x7ff8] = 0x00; @@ -175,22 +173,22 @@ int m48t37y_set_time(unsigned long sec) rtc_base[0x7ff8] = 0x80; /* year */ - rtc_base[0x7fff] = CONV_BIN_TO_BCD(tm.tm_year % 100); - rtc_base[0x7ff1] = CONV_BIN_TO_BCD(tm.tm_year / 100); + rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100); + rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100); /* month */ - rtc_base[0x7ffe] = CONV_BIN_TO_BCD(tm.tm_mon); + rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon); /* day */ - rtc_base[0x7ffd] = CONV_BIN_TO_BCD(tm.tm_mday); + rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday); /* hour/min/sec */ - rtc_base[0x7ffb] = CONV_BIN_TO_BCD(tm.tm_hour); - rtc_base[0x7ffa] = CONV_BIN_TO_BCD(tm.tm_min); - rtc_base[0x7ff9] = CONV_BIN_TO_BCD(tm.tm_sec); + rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour); + rtc_base[0x7ffa] = BIN2BCD(tm.tm_min); + rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec); /* day of week -- not really used, but let's keep it up-to-date */ - rtc_base[0x7ffc] = CONV_BIN_TO_BCD(tm.tm_wday + 1); + rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1); /* disable writing */ rtc_base[0x7ff8] = 0x00; @@ -215,8 +213,8 @@ void momenco_time_init(void) mips_hpt_frequency = cpu_clock / 2; board_timer_setup = momenco_timer_setup; - rtc_get_time = m48t37y_get_time; - rtc_set_time = m48t37y_set_time; + rtc_mips_get_time = m48t37y_get_time; + rtc_mips_set_time = m48t37y_set_time; } /* diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index bd02e60d037..a3e6f557559 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -227,8 +227,8 @@ void momenco_time_init(void) printk("momenco_time_init cpu_clock=%d\n", cpu_clock); board_timer_setup = momenco_timer_setup; - rtc_get_time = m48t37y_get_time; - rtc_set_time = m48t37y_set_time; + rtc_mips_get_time = m48t37y_get_time; + rtc_mips_set_time = m48t37y_set_time; } void __init plat_setup(void) diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index 8bce711575d..3f724d661bd 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -198,8 +198,8 @@ static void __init py_rtc_setup(void) if (!m48t37_base) printk(KERN_ERR "Mapping the RTC failed\n"); - rtc_get_time = m48t37y_get_time; - rtc_set_time = m48t37y_set_time; + rtc_mips_get_time = m48t37y_get_time; + rtc_mips_set_time = m48t37y_set_time; write_seqlock(&xtime_lock); xtime.tv_sec = m48t37y_get_time(); diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index 92a3b3c15ed..a9c58e067b5 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -238,7 +238,7 @@ static int __init reboot_setup(void) request_irq(SGI_PANEL_IRQ, panel_int, 0, "Front Panel", NULL); init_timer(&blink_timer); blink_timer.function = blink_timeout; - notifier_chain_register(&panic_notifier_list, &panic_block); + atomic_notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index b7300cc5c5a..cca688ad64a 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -212,8 +212,8 @@ static void indy_timer_setup(struct irqaction *irq) void __init ip22_time_init(void) { /* setup hookup functions */ - rtc_get_time = indy_rtc_get_time; - rtc_set_time = indy_rtc_set_time; + rtc_mips_get_time = indy_rtc_get_time; + rtc_mips_set_time = indy_rtc_set_time; board_time_init = indy_time_init; board_timer_setup = indy_timer_setup; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index e0d095daa5e..6c00dce9f73 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -19,6 +19,7 @@ #include <linux/nodemask.h> #include <linux/swap.h> #include <linux/bootmem.h> +#include <linux/pfn.h> #include <asm/page.h> #include <asm/sections.h> @@ -28,8 +29,6 @@ #include <asm/sn/sn_private.h> -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) - #define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) #define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index 0c948008b02..ab9d9cef089 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -193,7 +193,7 @@ static __init int ip32_reboot_setup(void) init_timer(&blink_timer); blink_timer.function = blink_timeout; - notifier_chain_register(&panic_notifier_list, &panic_block); + atomic_notifier_chain_register(&panic_notifier_list, &panic_block); request_irq(MACEISA_RTC_IRQ, ip32_rtc_int, 0, "rtc", NULL); diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index 2f50c79b788..a2dd8ae1ea8 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -91,8 +91,8 @@ void __init plat_setup(void) { board_be_init = ip32_be_init; - rtc_get_time = mc146818_get_cmos_time; - rtc_set_mmss = mc146818_set_rtc_mmss; + rtc_mips_get_time = mc146818_get_cmos_time; + rtc_mips_set_mmss = mc146818_set_rtc_mmss; board_time_init = ip32_time_init; board_timer_setup = ip32_timer_setup; diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index b661d2425a3..4b5f74ff3ed 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -121,14 +121,14 @@ void __init plat_setup(void) if (xicor_probe()) { printk("swarm setup: Xicor 1241 RTC detected.\n"); - rtc_get_time = xicor_get_time; - rtc_set_time = xicor_set_time; + rtc_mips_get_time = xicor_get_time; + rtc_mips_set_time = xicor_set_time; } if (m41t81_probe()) { printk("swarm setup: M41T81 RTC detected.\n"); - rtc_get_time = m41t81_get_time; - rtc_set_time = m41t81_set_time; + rtc_mips_get_time = m41t81_get_time; + rtc_mips_set_time = m41t81_set_time; } printk("This kernel optimized for " diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 1141fcd13a5..01ba6c581e3 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -164,8 +164,8 @@ static struct pci_controller sni_controller = { static inline void sni_pcimt_time_init(void) { - rtc_get_time = mc146818_get_cmos_time; - rtc_set_time = mc146818_set_rtc_mmss; + rtc_mips_get_time = mc146818_get_cmos_time; + rtc_mips_set_time = mc146818_set_rtc_mmss; } void __init plat_setup(void) diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index 2ad6401d2af..6dcf077f61a 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -1036,8 +1036,8 @@ toshiba_rbtx4927_time_init(void) #ifdef CONFIG_RTC_DS1742 - rtc_get_time = rtc_ds1742_get_time; - rtc_set_time = rtc_ds1742_set_time; + rtc_mips_get_time = rtc_ds1742_get_time; + rtc_mips_set_time = rtc_ds1742_set_time; TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, ":rtc_ds1742_init()-\n"); diff --git a/arch/mips/tx4938/common/rtc_rx5c348.c b/arch/mips/tx4938/common/rtc_rx5c348.c index d249edbb6af..07f782fc072 100644 --- a/arch/mips/tx4938/common/rtc_rx5c348.c +++ b/arch/mips/tx4938/common/rtc_rx5c348.c @@ -14,6 +14,7 @@ #include <linux/string.h> #include <linux/rtc.h> #include <linux/time.h> +#include <linux/bcd.h> #include <asm/time.h> #include <asm/tx4938/spi.h> @@ -77,17 +78,6 @@ spi_rtc_io(unsigned char *inbuf, unsigned char *outbuf, unsigned int count) inbufs, incounts, outbufs, outcounts, 0); } -/* - * Conversion between binary and BCD. - */ -#ifndef BCD_TO_BIN -#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) -#endif - -#ifndef BIN_TO_BCD -#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) -#endif - /* RTC-dependent code for time.c */ static int @@ -197,6 +187,6 @@ rtc_rx5c348_init(int chipid) srtc_24h = 1; /* set the function pointers */ - rtc_get_time = rtc_rx5c348_get_time; - rtc_set_time = rtc_rx5c348_set_time; + rtc_mips_get_time = rtc_rx5c348_get_time; + rtc_mips_set_time = rtc_rx5c348_set_time; } diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index eca33cfa8a4..6b3c50964ca 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -25,6 +25,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/parisc/kernel/pdc_chassis.c b/arch/parisc/kernel/pdc_chassis.c index 2a01fe1bdc9..0cea6958f42 100644 --- a/arch/parisc/kernel/pdc_chassis.c +++ b/arch/parisc/kernel/pdc_chassis.c @@ -150,7 +150,8 @@ void __init parisc_pdc_chassis_init(void) if (handle) { /* initialize panic notifier chain */ - notifier_chain_register(&panic_notifier_list, &pdc_chassis_panic_block); + atomic_notifier_chain_register(&panic_notifier_list, + &pdc_chassis_panic_block); /* initialize reboot notifier chain */ register_reboot_notifier(&pdc_chassis_reboot_block); diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index 61356901841..d286f68a3d3 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -21,7 +21,6 @@ #include <linux/times.h> #include <linux/utsname.h> #include <linux/time.h> -#include <linux/timex.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/sem.h> @@ -567,63 +566,6 @@ asmlinkage int sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *off } -struct timex32 { - unsigned int modes; /* mode selector */ - int offset; /* time offset (usec) */ - int freq; /* frequency offset (scaled ppm) */ - int maxerror; /* maximum error (usec) */ - int esterror; /* estimated error (usec) */ - int status; /* clock command/status */ - int constant; /* pll time constant */ - int precision; /* clock precision (usec) (read only) */ - int tolerance; /* clock frequency tolerance (ppm) - * (read only) - */ - struct compat_timeval time; /* (read only) */ - int tick; /* (modified) usecs between clock ticks */ - - int ppsfreq; /* pps frequency (scaled ppm) (ro) */ - int jitter; /* pps jitter (us) (ro) */ - int shift; /* interval duration (s) (shift) (ro) */ - int stabil; /* pps stability (scaled ppm) (ro) */ - int jitcnt; /* jitter limit exceeded (ro) */ - int calcnt; /* calibration intervals (ro) */ - int errcnt; /* calibration errors (ro) */ - int stbcnt; /* stability limit exceeded (ro) */ - - int :32; int :32; int :32; int :32; - int :32; int :32; int :32; int :32; - int :32; int :32; int :32; int :32; -}; - -asmlinkage long sys32_adjtimex(struct timex32 __user *txc_p32) -{ - struct timex txc; - struct timex32 t32; - int ret; - extern int do_adjtimex(struct timex *txc); - - if(copy_from_user(&t32, txc_p32, sizeof(struct timex32))) - return -EFAULT; -#undef CP -#define CP(x) txc.x = t32.x - CP(modes); CP(offset); CP(freq); CP(maxerror); CP(esterror); - CP(status); CP(constant); CP(precision); CP(tolerance); - CP(time.tv_sec); CP(time.tv_usec); CP(tick); CP(ppsfreq); CP(jitter); - CP(shift); CP(stabil); CP(jitcnt); CP(calcnt); CP(errcnt); - CP(stbcnt); - ret = do_adjtimex(&txc); -#undef CP -#define CP(x) t32.x = txc.x - CP(modes); CP(offset); CP(freq); CP(maxerror); CP(esterror); - CP(status); CP(constant); CP(precision); CP(tolerance); - CP(time.tv_sec); CP(time.tv_usec); CP(tick); CP(ppsfreq); CP(jitter); - CP(shift); CP(stabil); CP(jitcnt); CP(calcnt); CP(errcnt); - CP(stbcnt); - return copy_to_user(txc_p32, &t32, sizeof(struct timex32)) ? -EFAULT : ret; -} - - struct sysinfo32 { s32 uptime; u32 loads[3]; diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 71011eadb87..89b6c56ea0a 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -207,7 +207,7 @@ /* struct sockaddr... */ ENTRY_SAME(recvfrom) /* struct timex contains longs */ - ENTRY_DIFF(adjtimex) + ENTRY_COMP(adjtimex) ENTRY_SAME(mprotect) /* 125 */ /* old_sigset_t forced to 32 bits. Beware glibc sigset_t */ ENTRY_COMP(sigprocmask) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index fae42da7468..2cdc35ce804 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -37,6 +37,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -487,7 +491,7 @@ config PPC601_SYNC_FIX If in doubt, say Y here. config TAU - bool "Thermal Management Support" + bool "On-chip CPU temperature sensor support" depends on 6xx help G3 and G4 processors have an on-chip temperature sensor called the @@ -496,7 +500,7 @@ config TAU on-die temperature in /proc/cpuinfo if the cpu supports it. Unfortunately, on some chip revisions, this sensor is very inaccurate - and in some cases, does not work at all, so don't assume the cpu + and in many cases, does not work at all, so don't assume the cpu temp is actually what /proc/cpuinfo says it is. config TAU_INT diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 9254806f703..8d48e9e7162 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -110,11 +110,6 @@ config SERIAL_TEXT_DEBUG depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \ PPC_GEN550 || PPC_MPC52xx -config PPC_OCP - bool - depends on IBM_OCP || XILINX_OCP - default y - choice prompt "Early debugging (dangerous)" bool diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index a3fc7a23158..6ec84d37a33 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -129,13 +129,8 @@ core-y += arch/powerpc/kernel/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ -core-$(CONFIG_PPC32) += arch/ppc/kernel/ -core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ +core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ -core-$(CONFIG_APUS) += arch/ppc/amiga/ -drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/ -drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/ -drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ @@ -150,7 +145,7 @@ CPPFLAGS_vmlinux.lds := -Upowerpc BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage vmlinux.bin -.PHONY: $(BOOT_TARGETS) +PHONY += $(BOOT_TARGETS) boot := arch/$(ARCH)/boot diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 3c2acab6373..fe22e54ab2b 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc6 -# Wed Mar 15 16:19:48 2006 +# Linux kernel version: 2.6.16 +# Thu Mar 23 20:48:09 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -30,6 +30,7 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=4 @@ -51,7 +52,8 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -85,7 +87,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # @@ -130,7 +132,8 @@ CONFIG_CELL_IIC=y # # Cell Broadband Engine options # -CONFIG_SPU_FS=y +CONFIG_SPU_FS=m +CONFIG_SPUFS_MMAP=y # # Kernel options @@ -144,7 +147,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set CONFIG_KEXEC=y @@ -155,13 +158,16 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -232,6 +238,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m @@ -244,25 +251,7 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -278,51 +267,13 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # # CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set # # DCCP Configuration (EXPERIMENTAL) @@ -355,7 +306,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -408,7 +358,7 @@ CONFIG_FW_LOADER=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -484,7 +434,23 @@ CONFIG_IDEDMA_AUTO=y # # Multi-device support (RAID and LVM) # -# CONFIG_MD is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set # # Fusion MPT device support @@ -548,7 +514,7 @@ CONFIG_MII=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set +CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -560,7 +526,7 @@ CONFIG_SKGE=m # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_SPIDER_NET=y +CONFIG_SPIDER_NET=m # CONFIG_MV643XX_ETH is not set # @@ -678,6 +644,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set +CONFIG_HVC_DRIVER=y +CONFIG_HVC_RTAS=y # # IPMI @@ -694,14 +662,13 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -# CONFIG_WATCHDOG_RTAS is not set +CONFIG_WATCHDOG_RTAS=y # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -# CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -833,6 +800,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -852,7 +820,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # InfiniBand support # -# CONFIG_INFINIBAND is not set +CONFIG_INFINIBAND=y +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_MTHCA_DEBUG=y +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_DEBUG=y +CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -1037,10 +1012,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1058,7 +1029,7 @@ CONFIG_LOG_BUF_SHIFT=15 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/mpc8540_ads_defconfig index 2a8290ee15c..7f0780f1aa3 100644 --- a/arch/powerpc/configs/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: -# Sat Jan 14 15:57:54 2006 +# Linux kernel version: 2.6.16 +# Mon Mar 27 23:37:36 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -18,6 +19,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set +CONFIG_DEFAULT_UIMAGE=y # # Processor support @@ -42,7 +44,6 @@ CONFIG_SPE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -58,6 +59,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -72,10 +74,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -90,6 +88,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -183,6 +183,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -220,6 +221,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -229,11 +235,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -487,6 +488,12 @@ CONFIG_GEN_RTC=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -496,6 +503,7 @@ CONFIG_GEN_RTC=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -503,10 +511,6 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -531,6 +535,7 @@ CONFIG_HWMON=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -551,7 +556,7 @@ CONFIG_HWMON=y # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -603,7 +608,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -658,6 +662,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -695,6 +700,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 80e9fe2632b..0cc0995b81b 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,12 +12,12 @@ endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ - init_task.o process.o systbl.o + init_task.o process.o systbl.o idle.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o cpu_setup_power4.o \ - firmware.o sysfs.o idle_64.o + firmware.o sysfs.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -34,6 +34,11 @@ obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o +obj-$(CONFIG_TAU) += tau_6xx.o +obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o +obj32-$(CONFIG_MODULES) += module_32.o +obj-$(CONFIG_E500) += perfmon_fsl_booke.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -51,7 +56,6 @@ obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o -obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o @@ -77,6 +81,7 @@ smpobj-$(CONFIG_SMP) += smp.o endif +obj-$(CONFIG_PPC32) += $(obj32-y) obj-$(CONFIG_PPC64) += $(obj64-y) extra-$(CONFIG_PPC_FPU) += fpu.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 882889b1592..54b48f33005 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -105,8 +105,6 @@ int main(void) DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); - /* paca */ DEFINE(PACA_SIZE, sizeof(struct paca_struct)); DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index)); diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 55ed7716636..55ed7716636 100644 --- a/arch/ppc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 4827ca1ec89..b3a97946722 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -135,10 +135,10 @@ transfer_to_handler: mfspr r11,SPRN_HID0 mtcr r11 BEGIN_FTR_SECTION - bt- 8,power_save_6xx_restore /* Check DOZE */ + bt- 8,4f /* Check DOZE */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) BEGIN_FTR_SECTION - bt- 9,power_save_6xx_restore /* Check NAP */ + bt- 9,4f /* Check NAP */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont @@ -157,6 +157,10 @@ transfer_to_handler_cont: SYNC RFI /* jump to handler, enable MMU */ +#ifdef CONFIG_6xx +4: b power_save_6xx_restore +#endif + /* * On kernel stack overflow, load up an initial stack pointer * and call StackOverflow(regs), which should not return. diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 1060155d84c..19ad5c6b181 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -617,6 +617,12 @@ _GLOBAL(enter_rtas) mfsrr1 r10 std r10,_SRR1(r1) + /* Temporary workaround to clear CR until RTAS can be modified to + * ignore all bits. + */ + li r0,0 + mtcr r0 + /* There is no way it is acceptable to get here with interrupts enabled, * check it with the asm equivalent of WARN_ON */ diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c index 4d37a3cb80f..0bfe9061720 100644 --- a/arch/powerpc/kernel/firmware.c +++ b/arch/powerpc/kernel/firmware.c @@ -14,7 +14,9 @@ */ #include <linux/config.h> +#include <linux/module.h> #include <asm/firmware.h> -unsigned long ppc64_firmware_features; +unsigned long powerpc_firmware_features; +EXPORT_SYMBOL_GPL(powerpc_firmware_features); diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 35084f3a841..a5ae04a57c7 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1544,7 +1544,11 @@ _STATIC(__boot_from_prom) mr r28,r6 mr r27,r7 - /* Align the stack to 16-byte boundary for broken yaboot */ + /* + * Align the stack to 16-byte boundary + * Depending on the size and layout of the ELF sections in the initial + * boot binary, the stack pointer will be unalignet on PowerMac + */ rldicr r1,r1,0,59 /* Make sure we are running in 64 bits mode */ @@ -1847,21 +1851,6 @@ _STATIC(start_here_multiplatform) bl .__save_cpu_setup sync - /* Setup a valid physical PACA pointer in SPRG3 for early_setup - * note that boot_cpuid can always be 0 nowadays since there is - * nowhere it can be initialized differently before we reach this - * code - */ - LOAD_REG_IMMEDIATE(r27, boot_cpuid) - add r27,r27,r26 - lwz r27,0(r27) - - LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - add r13,r13,r26 /* convert to physical addr */ - mtspr SPRN_SPRG3,r13 - /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */ @@ -1930,6 +1919,17 @@ _STATIC(start_here_common) /* Not reached */ BUG_OPCODE +/* Put the paca pointer into r13 and SPRG3 */ +_GLOBAL(setup_boot_paca) + LOAD_REG_IMMEDIATE(r3, boot_cpuid) + lwz r3,0(r3) + LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */ + mulli r3,r3,PACA_SIZE /* Calculate vaddr of right paca */ + add r13,r3,r4 /* for this processor. */ + mtspr SPRN_SPRG3,r13 + + blr + /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/powerpc/kernel/idle_64.c b/arch/powerpc/kernel/idle.c index b879d3057ef..e9f321d74d8 100644 --- a/arch/powerpc/kernel/idle_64.c +++ b/arch/powerpc/kernel/idle.c @@ -2,13 +2,17 @@ * Idle daemon for PowerPC. Idle daemon will handle any action * that needs to be taken when the system becomes idle. * - * Originally Written by Cort Dougan (cort@cs.nmt.edu) + * Originally written by Cort Dougan (cort@cs.nmt.edu). + * Subsequent 32-bit hacking by Tom Rini, Armin Kuster, + * Paul Mackerras and others. * * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com> * * Additional shared processor, SMT, and firmware support * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com> * + * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -29,18 +33,43 @@ #include <asm/machdep.h> #include <asm/smp.h> -extern void power4_idle(void); +#ifdef CONFIG_HOTPLUG_CPU +#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \ + system_state == SYSTEM_RUNNING) +#else +#define cpu_should_die() 0 +#endif -void default_idle(void) +/* + * The body of the idle task. + */ +void cpu_idle(void) { - unsigned int cpu = smp_processor_id(); - set_thread_flag(TIF_POLLING_NRFLAG); + if (ppc_md.idle_loop) + ppc_md.idle_loop(); /* doesn't return */ + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - if (!need_resched()) { - while (!need_resched() && !cpu_is_offline(cpu)) { - ppc64_runlatch_off(); + ppc64_runlatch_off(); + while (!need_resched() && !cpu_should_die()) { + if (ppc_md.power_save) { + clear_thread_flag(TIF_POLLING_NRFLAG); + /* + * smp_mb is so clearing of TIF_POLLING_NRFLAG + * is ordered w.r.t. need_resched() test. + */ + smp_mb(); + local_irq_disable(); + + /* check again after disabling irqs */ + if (!need_resched() && !cpu_should_die()) + ppc_md.power_save(); + + local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); + + } else { /* * Go into low thread priority and possibly * low power mode. @@ -48,46 +77,18 @@ void default_idle(void) HMT_low(); HMT_very_low(); } - - HMT_medium(); } + HMT_medium(); ppc64_runlatch_on(); + if (cpu_should_die()) + cpu_die(); preempt_enable_no_resched(); schedule(); preempt_disable(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); } } -void native_idle(void) -{ - while (1) { - ppc64_runlatch_off(); - - if (!need_resched()) - power4_idle(); - - if (need_resched()) { - ppc64_runlatch_on(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } - - if (cpu_is_offline(smp_processor_id()) && - system_state == SYSTEM_RUNNING) - cpu_die(); - } -} - -void cpu_idle(void) -{ - BUG_ON(NULL == ppc_md.idle_loop); - ppc_md.idle_loop(); -} - int powersave_nap; #ifdef CONFIG_SYSCTL diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S index 444fdcc769f..12a4efbaa08 100644 --- a/arch/powerpc/kernel/idle_6xx.S +++ b/arch/powerpc/kernel/idle_6xx.S @@ -87,19 +87,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) cmpwi 0,r3,0 beqlr - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: /* Some pre-nap cleanups needed on some CPUs */ andis. r0,r3,HID0_NAP@h beq 2f @@ -157,7 +144,8 @@ BEGIN_FTR_SECTION DSSALL sync END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ + mfmsr r7 + ori r7,r7,MSR_EE oris r7,r7,MSR_POW@h sync isync @@ -220,8 +208,6 @@ _GLOBAL(nap_save_msscr0) _GLOBAL(nap_save_hid1) .space 4*NR_CPUS -_GLOBAL(powersave_nap) - .long 0 _GLOBAL(powersave_lowspeed) .long 0 diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S index c16b4afab58..6dad1c02496 100644 --- a/arch/powerpc/kernel/idle_power4.S +++ b/arch/powerpc/kernel/idle_power4.S @@ -1,11 +1,5 @@ /* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) + * This file contains the power_save function for 970-family CPUs. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -26,49 +20,23 @@ .text -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ _GLOBAL(power4_idle) BEGIN_FTR_SECTION blr END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - LOAD_REG_ADDRBASE(r3,cur_cpu_spec) - ld r4,ADDROFF(cur_cpu_spec)(r3) - ld r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beqlr /* Now check if user or arch enabled NAP mode */ LOAD_REG_ADDRBASE(r3,powersave_nap) lwz r4,ADDROFF(powersave_nap)(r3) cmpwi 0,r4,0 beqlr - /* Clear MSR:EE */ - mfmsr r7 - li r4,0 - ori r4,r4,MSR_EE - andc r0,r7,r4 - mtmsrd r0 - - /* Check current_thread_info()->flags */ - clrrdi r4,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsrd r7 /* out of line this ? */ - blr -1: /* Go to NAP now */ BEGIN_FTR_SECTION DSSALL sync END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + mfmsr r7 + ori r7,r7,MSR_EE oris r7,r7,MSR_POW@h sync isync diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 771a59cbd21..bb5c9501234 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -379,7 +379,7 @@ void irq_ctx_init(void) struct thread_info *tp; int i; - for_each_cpu(i) { + for_each_possible_cpu(i) { memset((void *)softirq_ctx[i], 0, THREAD_SIZE); tp = softirq_ctx[i]; tp->cpu = i; diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index cb1fe5878e8..ad7a9021220 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -30,9 +30,11 @@ #include <linux/kprobes.h> #include <linux/ptrace.h> #include <linux/preempt.h> +#include <linux/module.h> #include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/sstep.h> +#include <asm/uaccess.h> DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); @@ -372,17 +374,62 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs); + const struct exception_table_entry *entry; + + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the nip points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->nip = (unsigned long)cur->addr; regs->msr &= ~MSR_SE; regs->msr |= kcb->kprobe_saved_msr; - - reset_current_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + if ((entry = search_exception_tables(regs->nip)) != NULL) { + regs->nip = entry->fixup; + return 1; + } + + /* + * fixup_exception() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; } return 0; } @@ -396,6 +443,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch (val) { case DIE_BPT: if (kprobe_handler(args->regs)) diff --git a/arch/ppc/kernel/l2cr.S b/arch/powerpc/kernel/l2cr_6xx.S index d7f4e982b53..d7f4e982b53 100644 --- a/arch/ppc/kernel/l2cr.S +++ b/arch/powerpc/kernel/l2cr_6xx.S diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index c7a799a0951..6e67b5b49ba 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -37,7 +37,7 @@ static int legacy_serial_console = -1; static int __init add_legacy_port(struct device_node *np, int want_index, int iotype, phys_addr_t base, phys_addr_t taddr, unsigned long irq, - unsigned int flags) + upf_t flags) { u32 *clk, *spd, clock = BASE_BAUD * 16; int index; @@ -113,7 +113,7 @@ static int __init add_legacy_soc_port(struct device_node *np, { phys_addr_t addr; u32 *addrp; - unsigned int flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; /* We only support ports that have a clock frequency properly * encoded in the device-tree. @@ -236,6 +236,23 @@ static int __init add_legacy_pci_port(struct device_node *np, } #endif +static void __init setup_legacy_serial_console(int console) +{ + struct legacy_serial_info *info = + &legacy_serial_infos[console]; + void __iomem *addr; + + if (info->taddr == 0) + return; + addr = ioremap(info->taddr, 0x1000); + if (addr == NULL) + return; + if (info->speed == 0) + info->speed = udbg_probe_uart_speed(addr, info->clock); + DBG("default console speed = %d\n", info->speed); + udbg_init_uart(addr, info->speed, info->clock); +} + /* * This is called very early, as part of setup_system() or eventually * setup_arch(), basically before anything else in this file. This function @@ -318,25 +335,8 @@ void __init find_legacy_serial_ports(void) #endif DBG("legacy_serial_console = %d\n", legacy_serial_console); - - /* udbg is 64 bits only for now, that will change soon though ... */ - while (legacy_serial_console >= 0) { - struct legacy_serial_info *info = - &legacy_serial_infos[legacy_serial_console]; - void __iomem *addr; - - if (info->taddr == 0) - break; - addr = ioremap(info->taddr, 0x1000); - if (addr == NULL) - break; - if (info->speed == 0) - info->speed = udbg_probe_uart_speed(addr, info->clock); - DBG("default console speed = %d\n", info->speed); - udbg_init_uart(addr, info->speed, info->clock); - break; - } - + if (legacy_serial_console >= 0) + setup_legacy_serial_console(legacy_serial_console); DBG(" <- find_legacy_serial_port()\n"); } diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index e789fef4eb8..1b73508ecb2 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -56,7 +56,7 @@ static unsigned long get_purr(void) unsigned long sum_purr = 0; int cpu; - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { sum_purr += lppaca[cpu].emulated_time_base; #ifdef PURR_DEBUG @@ -222,7 +222,7 @@ static unsigned long get_purr(void) int cpu; struct cpu_usage *cu; - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { cu = &per_cpu(cpu_usage_array, cpu); sum_purr += cu->current_tb; } diff --git a/arch/ppc/kernel/module.c b/arch/powerpc/kernel/module_32.c index 92f4e5f64f0..92f4e5f64f0 100644 --- a/arch/ppc/kernel/module.c +++ b/arch/powerpc/kernel/module_32.c diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index fd7db8d542d..ada50aa5b60 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -160,7 +160,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, case IOC_NVRAM_GET_OFFSET: { int part, offset; - if (_machine != PLATFORM_POWERMAC) + if (!machine_is(powermac)) return -EINVAL; if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0) return -EFAULT; @@ -174,8 +174,9 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, return 0; } #endif /* CONFIG_PPC_PMAC */ + default: + return -EINVAL; } - return -EINVAL; } struct file_operations nvram_fops = { @@ -443,7 +444,7 @@ static int nvram_setup_partition(void) * in our nvram, as Apple defined partitions use pretty much * all of the space */ - if (_machine == PLATFORM_POWERMAC) + if (machine_is(powermac)) return -ENOSPC; /* see if we have an OS partition that meets our needs. diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 5d1b708086b..f505a8827e3 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -56,14 +56,11 @@ struct lppaca lppaca[] = { * processors. The processor VPD array needs one entry per physical * processor (not thread). */ -#define PACA_INIT_COMMON(number, start, asrr, asrv) \ +#define PACA_INIT_COMMON(number) \ .lppaca_ptr = &lppaca[number], \ .lock_token = 0x8000, \ .paca_index = (number), /* Paca Index */ \ .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ - .stab_real = (asrr), /* Real pointer to segment table */ \ - .stab_addr = (asrv), /* Virt pointer to segment table */ \ - .cpu_start = (start), /* Processor start */ \ .hw_cpu_id = 0xffff, #ifdef CONFIG_PPC_ISERIES @@ -72,30 +69,20 @@ struct lppaca lppaca[] = { #define PACA_INIT(number) \ { \ - PACA_INIT_COMMON(number, 0, 0, 0) \ - PACA_INIT_ISERIES(number) \ -} - -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \ + PACA_INIT_COMMON(number) \ PACA_INIT_ISERIES(number) \ } #else #define PACA_INIT(number) \ { \ - PACA_INIT_COMMON(number, 0, 0, 0) \ + PACA_INIT_COMMON(number) \ } -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \ -} #endif struct paca_struct paca[] = { - BOOTCPU_PACA_INIT(0), + PACA_INIT(0), #if NR_CPUS > 1 PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3), #if NR_CPUS > 4 diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 704c846b2b0..b129d2e4b75 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -787,7 +787,7 @@ pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) * fix has to be done by making the remapping per-host and always * filling the pci_to_OF map. --BenH */ - if (_machine == _MACH_Pmac && busnr >= 0xf0) + if (machine_is(powermac) && busnr >= 0xf0) busnr -= 0xf0; else #endif @@ -1728,7 +1728,7 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) * (bus 0 is HT root), we return the AGP one instead. */ #ifdef CONFIG_PPC_PMAC - if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4")) + if (machine_is(powermac) && machine_is_compatible("MacRISC4")) if (bus == 0) bus = 0xf0; #endif /* CONFIG_PPC_PMAC */ diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index ba92bab7cc2..4c4449be81c 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -78,6 +78,7 @@ int global_phb_number; /* Global phb counter */ /* Cached ISA bridge dev. */ struct pci_dev *ppc64_isabridge_dev = NULL; +EXPORT_SYMBOL_GPL(ppc64_isabridge_dev); static void fixup_broken_pcnet32(struct pci_dev* dev) { diff --git a/arch/ppc/kernel/perfmon_fsl_booke.c b/arch/powerpc/kernel/perfmon_fsl_booke.c index 32455dfcc36..32455dfcc36 100644 --- a/arch/ppc/kernel/perfmon_fsl_booke.c +++ b/arch/powerpc/kernel/perfmon_fsl_booke.c diff --git a/arch/powerpc/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c index 7ba42a405f4..3c2cf661f6d 100644 --- a/arch/powerpc/kernel/proc_ppc64.c +++ b/arch/powerpc/kernel/proc_ppc64.c @@ -23,6 +23,7 @@ #include <linux/slab.h> #include <linux/kernel.h> +#include <asm/machdep.h> #include <asm/vdso_datapage.h> #include <asm/rtas.h> #include <asm/uaccess.h> @@ -51,7 +52,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(platform_is_pseries() || _machine == PLATFORM_CELL)) + if (!machine_is(pseries) && !machine_is(cell)) return 0; if (!proc_mkdir("rtas", root)) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 1770a066c21..706090c99f4 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -35,7 +35,6 @@ #include <linux/mqueue.h> #include <linux/hardirq.h> #include <linux/utsname.h> -#include <linux/kprobes.h> #include <asm/pgtable.h> #include <asm/uaccess.h> @@ -46,6 +45,7 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/time.h> +#include <asm/syscalls.h> #ifdef CONFIG_PPC64 #include <asm/firmware.h> #endif @@ -363,7 +363,11 @@ static void show_instructions(struct pt_regs *regs) if (!(i % 8)) printk("\n"); - if (BAD_PC(pc) || __get_user(instr, (unsigned int *)pc)) { + /* We use __get_user here *only* to avoid an OOPS on a + * bad address because the pc *should* only be a + * kernel address. + */ + if (BAD_PC(pc) || __get_user(instr, (unsigned int __user *)pc)) { printk("XXXXXXXX "); } else { if (regs->nip == pc) @@ -460,7 +464,6 @@ void show_regs(struct pt_regs * regs) void exit_thread(void) { - kprobe_flush_task(current); discard_lazy_cpu_state(); } @@ -767,7 +770,7 @@ out: return error; } -static int validate_sp(unsigned long sp, struct task_struct *p, +int validate_sp(unsigned long sp, struct task_struct *p, unsigned long nbytes) { unsigned long stack_page = (unsigned long)task_stack_page(p); @@ -805,6 +808,8 @@ static int validate_sp(unsigned long sp, struct task_struct *p, #define FRAME_MARKER 2 #endif +EXPORT_SYMBOL(validate_sp); + unsigned long get_wchan(struct task_struct *p) { unsigned long ip, sp; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index d63cd562d9d..4336390bcf3 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -383,14 +383,14 @@ static int __devinit finish_node_interrupts(struct device_node *np, /* Apple uses bits in there in a different way, let's * only keep the real sense bit on macs */ - if (_machine == PLATFORM_POWERMAC) + if (machine_is(powermac)) sense &= 0x1; np->intrs[intrcount].sense = map_mpic_senses[sense]; } #ifdef CONFIG_PPC64 /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { + if (machine_is(powermac) && ic && ic->parent) { char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; @@ -570,6 +570,18 @@ int __init of_scan_flat_dt(int (*it)(unsigned long node, return rc; } +unsigned long __init of_get_flat_dt_root(void) +{ + unsigned long p = ((unsigned long)initial_boot_params) + + initial_boot_params->off_dt_struct; + + while(*((u32 *)p) == OF_DT_NOP) + p += 4; + BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE); + p += 4; + return _ALIGN(p + strlen((char *)p) + 1, 4); +} + /** * This function can be used within scan_flattened_dt callback to get * access to properties @@ -612,6 +624,25 @@ void* __init of_get_flat_dt_prop(unsigned long node, const char *name, } while(1); } +int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) +{ + const char* cp; + unsigned long cplen, l; + + cp = of_get_flat_dt_prop(node, "compatible", &cplen); + if (cp == NULL) + return 0; + while (cplen > 0) { + if (strncasecmp(cp, compat, strlen(compat)) == 0) + return 1; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + + return 0; +} + static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, unsigned long align) { @@ -686,7 +717,7 @@ static unsigned long __init unflatten_dt_node(unsigned long mem, #ifdef DEBUG if ((strlen(p) + l + 1) != allocl) { DBG("%s: p: %d, l: %d, a: %d\n", - pathp, strlen(p), l, allocl); + pathp, (int)strlen(p), l, allocl); } #endif p += strlen(p); @@ -854,35 +885,73 @@ void __init unflatten_device_tree(void) DBG(" <- unflatten_device_tree()\n"); } - static int __init early_init_dt_scan_cpus(unsigned long node, - const char *uname, int depth, void *data) + const char *uname, int depth, + void *data) { + static int logical_cpuid = 0; + char *type = of_get_flat_dt_prop(node, "device_type", NULL); +#ifdef CONFIG_ALTIVEC u32 *prop; - unsigned long size; - char *type = of_get_flat_dt_prop(node, "device_type", &size); +#endif + u32 *intserv; + int i, nthreads; + unsigned long len; + int found = 0; /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) return 0; - boot_cpuid = 0; - boot_cpuid_phys = 0; - if (initial_boot_params && initial_boot_params->version >= 2) { - /* version 2 of the kexec param format adds the phys cpuid - * of booted proc. - */ - boot_cpuid_phys = initial_boot_params->boot_cpuid_phys; + /* Get physical cpuid */ + intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len); + if (intserv) { + nthreads = len / sizeof(int); } else { - /* Check if it's the boot-cpu, set it's hw index now */ - if (of_get_flat_dt_prop(node, + intserv = of_get_flat_dt_prop(node, "reg", NULL); + nthreads = 1; + } + + /* + * Now see if any of these threads match our boot cpu. + * NOTE: This must match the parsing done in smp_setup_cpu_maps. + */ + for (i = 0; i < nthreads; i++) { + /* + * version 2 of the kexec param format adds the phys cpuid of + * booted proc. + */ + if (initial_boot_params && initial_boot_params->version >= 2) { + if (intserv[i] == + initial_boot_params->boot_cpuid_phys) { + found = 1; + break; + } + } else { + /* + * Check if it's the boot-cpu, set it's hw index now, + * unfortunately this format did not support booting + * off secondary threads. + */ + if (of_get_flat_dt_prop(node, "linux,boot-cpu", NULL) != NULL) { - prop = of_get_flat_dt_prop(node, "reg", NULL); - if (prop != NULL) - boot_cpuid_phys = *prop; + found = 1; + break; + } } + +#ifdef CONFIG_SMP + /* logical cpu id is always 0 on UP kernels */ + logical_cpuid++; +#endif + } + + if (found) { + DBG("boot cpu: logical %d physical %d\n", logical_cpuid, + intserv[i]); + boot_cpuid = logical_cpuid; + set_hard_smp_processor_id(boot_cpuid, intserv[i]); } - set_hard_smp_processor_id(0, boot_cpuid_phys); #ifdef CONFIG_ALTIVEC /* Check if we have a VMX and eventually update CPU features */ @@ -901,16 +970,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node, #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_PPC_PSERIES - /* - * Check for an SMT capable CPU and set the CPU feature. We do - * this by looking at the size of the ibm,ppc-interrupt-server#s - * property - */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", - &size); - cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; - if (prop && ((size / sizeof(u32)) > 1)) + if (nthreads > 1) cur_cpu_spec->cpu_features |= CPU_FTR_SMT; + else + cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; #endif return 0; @@ -919,7 +982,6 @@ static int __init early_init_dt_scan_cpus(unsigned long node, static int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, int depth, void *data) { - u32 *prop; unsigned long *lprop; unsigned long l; char *p; @@ -930,14 +992,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node, (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) return 0; - /* get platform type */ - prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); - if (prop == NULL) - return 0; -#ifdef CONFIG_PPC_MULTIPLATFORM - _machine = *prop; -#endif - #ifdef CONFIG_PPC64 /* check if iommu is forced on or off */ if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) @@ -964,15 +1018,15 @@ static int __init early_init_dt_scan_chosen(unsigned long node, * set of RTAS infos now if available */ { - u64 *basep, *entryp; + u64 *basep, *entryp, *sizep; basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL); entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL); - prop = of_get_flat_dt_prop(node, "linux,rtas-size", NULL); - if (basep && entryp && prop) { + sizep = of_get_flat_dt_prop(node, "linux,rtas-size", NULL); + if (basep && entryp && sizep) { rtas.base = *basep; rtas.entry = *entryp; - rtas.size = *prop; + rtas.size = *sizep; } } #endif /* CONFIG_PPC_RTAS */ @@ -1001,25 +1055,13 @@ static int __init early_init_dt_scan_chosen(unsigned long node, if (strstr(cmd_line, "mem=")) { char *p, *q; - unsigned long maxmem = 0; for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) { q = p + 4; if (p > cmd_line && p[-1] != ' ') continue; - maxmem = simple_strtoul(q, &q, 0); - if (*q == 'k' || *q == 'K') { - maxmem <<= 10; - ++q; - } else if (*q == 'm' || *q == 'M') { - maxmem <<= 20; - ++q; - } else if (*q == 'g' || *q == 'G') { - maxmem <<= 30; - ++q; - } + memory_limit = memparse(q, &q); } - memory_limit = maxmem; } /* break now */ @@ -1755,7 +1797,7 @@ static int of_finish_dynamic_node(struct device_node *node) /* We don't support that function on PowerMac, at least * not yet */ - if (_machine == PLATFORM_POWERMAC) + if (machine_is(powermac)) return -ENODEV; /* fix up new node's linux_phandle field */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 813c2cd194c..d66c5e77fcf 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -180,6 +180,16 @@ static unsigned long __initdata prom_tce_alloc_start; static unsigned long __initdata prom_tce_alloc_end; #endif +/* Platforms codes are now obsolete in the kernel. Now only used within this + * file and ultimately gone too. Feel free to change them if you need, they + * are not shared with anything outside of this file anymore + */ +#define PLATFORM_PSERIES 0x0100 +#define PLATFORM_PSERIES_LPAR 0x0101 +#define PLATFORM_LPAR 0x0001 +#define PLATFORM_POWERMAC 0x0400 +#define PLATFORM_GENERIC 0x0500 + static int __initdata of_platform; static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; @@ -397,6 +407,11 @@ static void __init __attribute__((noreturn)) prom_panic(const char *reason) reason = PTRRELOC(reason); #endif prom_print(reason); + /* Do not call exit because it clears the screen on pmac + * it also causes some sort of double-fault on early pmacs */ + if (RELOC(of_platform) == PLATFORM_POWERMAC) + asm("trap\n"); + /* ToDo: should put up an SRC here on p/iSeries */ call_prom("exit", 0, 0); @@ -1487,7 +1502,10 @@ static int __init prom_find_machine_type(void) int len, i = 0; #ifdef CONFIG_PPC64 phandle rtas; + int x; #endif + + /* Look for a PowerMac */ len = prom_getprop(_prom->root, "compatible", compat, sizeof(compat)-1); if (len > 0) { @@ -1500,28 +1518,36 @@ static int __init prom_find_machine_type(void) if (strstr(p, RELOC("Power Macintosh")) || strstr(p, RELOC("MacRISC"))) return PLATFORM_POWERMAC; -#ifdef CONFIG_PPC64 - if (strstr(p, RELOC("Momentum,Maple"))) - return PLATFORM_MAPLE; - if (strstr(p, RELOC("IBM,CPB"))) - return PLATFORM_CELL; -#endif i += sl + 1; } } #ifdef CONFIG_PPC64 + /* If not a mac, try to figure out if it's an IBM pSeries or any other + * PAPR compliant platform. We assume it is if : + * - /device_type is "chrp" (please, do NOT use that for future + * non-IBM designs ! + * - it has /rtas + */ + len = prom_getprop(_prom->root, "model", + compat, sizeof(compat)-1); + if (len <= 0) + return PLATFORM_GENERIC; + compat[len] = 0; + if (strcmp(compat, "chrp")) + return PLATFORM_GENERIC; + /* Default to pSeries. We need to know if we are running LPAR */ rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (PHANDLE_VALID(rtas)) { - int x = prom_getproplen(rtas, "ibm,hypertas-functions"); - if (x != PROM_ERROR) { - prom_printf("Hypertas detected, assuming LPAR !\n"); - return PLATFORM_PSERIES_LPAR; - } + if (!PHANDLE_VALID(rtas)) + return PLATFORM_GENERIC; + x = prom_getproplen(rtas, "ibm,hypertas-functions"); + if (x != PROM_ERROR) { + prom_printf("Hypertas detected, assuming LPAR !\n"); + return PLATFORM_PSERIES_LPAR; } return PLATFORM_PSERIES; #else - return PLATFORM_CHRP; + return PLATFORM_GENERIC; #endif } @@ -2029,7 +2055,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, { struct prom_t *_prom; unsigned long hdr; - u32 getprop_rval; unsigned long offset = reloc_offset(); #ifdef CONFIG_PPC32 @@ -2060,6 +2085,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_init_stdout(); + /* + * Get default machine type. At this point, we do not differentiate + * between pSeries SMP and pSeries LPAR + */ + RELOC(of_platform) = prom_find_machine_type(); + /* Bail if this is a kdump kernel. */ if (PHYSICAL_START > 0) prom_panic("Error: You can't boot a kdump kernel from OF!\n"); @@ -2069,15 +2100,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_check_initrd(r3, r4); - /* - * Get default machine type. At this point, we do not differentiate - * between pSeries SMP and pSeries LPAR - */ - RELOC(of_platform) = prom_find_machine_type(); - getprop_rval = RELOC(of_platform); - prom_setprop(_prom->chosen, "/chosen", "linux,platform", - &getprop_rval, sizeof(getprop_rval)); - #ifdef CONFIG_PPC_PSERIES /* * On pSeries, inform the firmware about our capabilities diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 1f03fb28cc0..456286cf1d1 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -257,7 +257,7 @@ static int __init proc_rtas_init(void) { struct proc_dir_entry *entry; - if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR) + if (!machine_is(pseries)) return 1; rtas_node = of_find_node_by_name(NULL, "rtas"); diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index b5b2add7ad1..06636c927a7 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -25,6 +25,7 @@ #include <asm/hvcall.h> #include <asm/semaphore.h> #include <asm/machdep.h> +#include <asm/firmware.h> #include <asm/page.h> #include <asm/param.h> #include <asm/system.h> @@ -32,6 +33,7 @@ #include <asm/uaccess.h> #include <asm/lmb.h> #include <asm/udbg.h> +#include <asm/syscalls.h> struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED @@ -591,7 +593,7 @@ static void rtas_percpu_suspend_me(void *info) data->waiting = 0; data->args->args[data->args->nargs] = rtas_call(ibm_suspend_me_token, 0, 1, NULL); - for_each_cpu(i) + for_each_possible_cpu(i) plpar_hcall_norets(H_PROD,i); } else { data->waiting = -EBUSY; @@ -624,7 +626,7 @@ static int rtas_ibm_suspend_me(struct rtas_args *args) /* Prod each CPU. This won't hurt, and will wake * anyone we successfully put to sleep with H_Join */ - for_each_cpu(i) + for_each_possible_cpu(i) plpar_hcall_norets(H_PROD, i); return data.waiting; @@ -767,7 +769,7 @@ void __init rtas_initialize(void) * the stop-self token if any */ #ifdef CONFIG_PPC64 - if (_machine == PLATFORM_PSERIES_LPAR) { + if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) { rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); ibm_suspend_me_token = rtas_token("ibm,suspend-me"); } diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index c1d62bf11f2..c607f3b9ca1 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -9,6 +9,9 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ + +#undef DEBUG + #include <linux/config.h> #include <linux/module.h> #include <linux/string.h> @@ -41,6 +44,7 @@ #include <asm/time.h> #include <asm/cputable.h> #include <asm/sections.h> +#include <asm/firmware.h> #include <asm/btext.h> #include <asm/nvram.h> #include <asm/setup.h> @@ -56,8 +60,6 @@ #include "setup.h" -#undef DEBUG - #ifdef DEBUG #include <asm/udbg.h> #define DBG(fmt...) udbg_printf(fmt) @@ -65,10 +67,12 @@ #define DBG(fmt...) #endif -#ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; -EXPORT_SYMBOL(_machine); -#endif +/* The main machine-dep calls structure + */ +struct machdep_calls ppc_md; +EXPORT_SYMBOL(ppc_md); +struct machdep_calls *machine_id; +EXPORT_SYMBOL(machine_id); unsigned long klimit = (unsigned long) _end; @@ -168,7 +172,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) bogosum/(500000/HZ), bogosum/(5000/HZ) % 100); #endif /* CONFIG_SMP && CONFIG_PPC32 */ seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq); - + if (ppc_md.name) + seq_printf(m, "platform\t: %s\n", ppc_md.name); if (ppc_md.show_cpuinfo != NULL) ppc_md.show_cpuinfo(m); @@ -352,12 +357,13 @@ void __init check_for_initrd(void) * must be called before using this. * * While we're here, we may as well set the "physical" cpu ids in the paca. + * + * NOTE: This must match the parsing done in early_init_dt_scan_cpus. */ void __init smp_setup_cpu_maps(void) { struct device_node *dn = NULL; int cpu = 0; - int swap_cpuid = 0; while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { int *intserv; @@ -376,30 +382,17 @@ void __init smp_setup_cpu_maps(void) for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { cpu_set(cpu, cpu_present_map); set_hard_smp_processor_id(cpu, intserv[j]); - - if (intserv[j] == boot_cpuid_phys) - swap_cpuid = cpu; cpu_set(cpu, cpu_possible_map); cpu++; } } - /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that - * boot cpu is logical 0. - */ - if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { - u32 tmp; - tmp = get_hard_smp_processor_id(0); - set_hard_smp_processor_id(0, boot_cpuid_phys); - set_hard_smp_processor_id(swap_cpuid, tmp); - } - #ifdef CONFIG_PPC64 /* * On pSeries LPAR, we need to know how many cpus * could possibly be added to this partition. */ - if (_machine == PLATFORM_PSERIES_LPAR && + if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) && (dn = of_find_node_by_path("/rtas"))) { int num_addr_cell, num_size_cell, maxcpus; unsigned int *ireg; @@ -438,7 +431,7 @@ void __init smp_setup_cpu_maps(void) /* * Do the sibling map; assume only two threads per processor. */ - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { cpu_set(cpu, cpu_sibling_map[cpu]); if (cpu_has_feature(CPU_FTR_SMT)) cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); @@ -468,3 +461,34 @@ static int __init early_xmon(char *p) } early_param("xmon", early_xmon); #endif + +void probe_machine(void) +{ + extern struct machdep_calls __machine_desc_start; + extern struct machdep_calls __machine_desc_end; + + /* + * Iterate all ppc_md structures until we find the proper + * one for the current machine type + */ + DBG("Probing machine type ...\n"); + + for (machine_id = &__machine_desc_start; + machine_id < &__machine_desc_end; + machine_id++) { + DBG(" %s ...", machine_id->name); + memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls)); + if (ppc_md.probe()) { + DBG(" match !\n"); + break; + } + DBG("\n"); + } + /* What can we do if we didn't find ? */ + if (machine_id >= &__machine_desc_end) { + DBG("No suitable machine found !\n"); + for (;;); + } + + printk(KERN_INFO "Using %s machine description\n", ppc_md.name); +} diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index dc2770df25b..a72bf5dceee 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -53,9 +53,6 @@ extern void platform_init(void); extern void bootx_init(unsigned long r4, unsigned long phys); -extern void ppc6xx_idle(void); -extern void power4_idle(void); - boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; @@ -70,10 +67,6 @@ unsigned int DMA_MODE_WRITE; int have_of = 1; #ifdef CONFIG_PPC_MULTIPLATFORM -extern void prep_init(void); -extern void pmac_init(void); -extern void chrp_init(void); - dev_t boot_dev; #endif /* CONFIG_PPC_MULTIPLATFORM */ @@ -85,9 +78,6 @@ unsigned long SYSRQ_KEY = 0x54; unsigned long vgacon_remap_base; #endif -struct machdep_calls ppc_md; -EXPORT_SYMBOL(ppc_md); - /* * These are used in binfmt_elf.c to put aux entries on the stack * for each elf executable being started. @@ -111,7 +101,7 @@ unsigned long __init early_init(unsigned long dt_ptr) /* First zero the BSS -- use memset_io, some platforms don't have * caches on yet */ - memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start); + memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start); /* * Identify the CPU type and fix up code sections @@ -123,48 +113,6 @@ unsigned long __init early_init(unsigned long dt_ptr) return KERNELBASE + offset; } -#ifdef CONFIG_PPC_MULTIPLATFORM -/* - * The PPC_MULTIPLATFORM version of platform_init... - */ -void __init platform_init(void) -{ - /* if we didn't get any bootinfo telling us what we are... */ - if (_machine == 0) { - /* prep boot loader tells us if we're prep or not */ - if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) ) - _machine = _MACH_prep; - } - -#ifdef CONFIG_PPC_PREP - /* not much more to do here, if prep */ - if (_machine == _MACH_prep) { - prep_init(); - return; - } -#endif - -#ifdef CONFIG_ADB - if (strstr(cmd_line, "adb_sync")) { - extern int __adb_probe_sync; - __adb_probe_sync = 1; - } -#endif /* CONFIG_ADB */ - - switch (_machine) { -#ifdef CONFIG_PPC_PMAC - case _MACH_Pmac: - pmac_init(); - break; -#endif -#ifdef CONFIG_PPC_CHRP - case _MACH_chrp: - chrp_init(); - break; -#endif - } -} -#endif /* * Find out what kind of machine we're on and save any data we need @@ -190,11 +138,17 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys) strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); #endif /* CONFIG_CMDLINE */ - /* Base init based on machine type */ +#ifdef CONFIG_PPC_MULTIPLATFORM + probe_machine(); +#else + /* Base init based on machine type. Obsoloete, please kill ! */ platform_init(); +#endif #ifdef CONFIG_6xx - ppc_md.power_save = ppc6xx_idle; + if (cpu_has_feature(CPU_FTR_CAN_DOZE) || + cpu_has_feature(CPU_FTR_CAN_NAP)) + ppc_md.power_save = ppc6xx_idle; #endif if (ppc_md.progress) @@ -272,7 +226,7 @@ int __init ppc_init(void) if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff); /* register CPU devices */ - for_each_cpu(i) + for_each_possible_cpu(i) register_cpu(&cpu_devices[i], i, NULL); /* call platform init */ @@ -352,12 +306,6 @@ void __init setup_arch(char **cmdline_p) do_init_bootmem(); if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab); -#ifdef CONFIG_PPC_OCP - /* Initialize OCP device list */ - ocp_early_init(); - if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab); -#endif - #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif @@ -366,7 +314,4 @@ void __init setup_arch(char **cmdline_p) if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); paging_init(); - - /* this is for modules since _machine can be a define -- Cort */ - ppc_md.ppc_machine = _machine; } diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 2f3fdad3559..59aa92cd6fa 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -73,7 +73,6 @@ int have_of = 1; int boot_cpuid = 0; -int boot_cpuid_phys = 0; dev_t boot_dev; u64 ppc64_pft_size; @@ -96,11 +95,6 @@ int dcache_bsize; int icache_bsize; int ucache_bsize; -/* The main machine-dep calls structure - */ -struct machdep_calls ppc_md; -EXPORT_SYMBOL(ppc_md); - #ifdef CONFIG_MAGIC_SYSRQ unsigned long SYSRQ_KEY; #endif /* CONFIG_MAGIC_SYSRQ */ @@ -161,32 +155,6 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ -extern struct machdep_calls pSeries_md; -extern struct machdep_calls pmac_md; -extern struct machdep_calls maple_md; -extern struct machdep_calls cell_md; -extern struct machdep_calls iseries_md; - -/* Ultimately, stuff them in an elf section like initcalls... */ -static struct machdep_calls __initdata *machines[] = { -#ifdef CONFIG_PPC_PSERIES - &pSeries_md, -#endif /* CONFIG_PPC_PSERIES */ -#ifdef CONFIG_PPC_PMAC - &pmac_md, -#endif /* CONFIG_PPC_PMAC */ -#ifdef CONFIG_PPC_MAPLE - &maple_md, -#endif /* CONFIG_PPC_MAPLE */ -#ifdef CONFIG_PPC_CELL - &cell_md, -#endif -#ifdef CONFIG_PPC_ISERIES - &iseries_md, -#endif - NULL -}; - /* * Early initialization entry point. This is called by head.S * with MMU translation disabled. We rely on the "feature" of @@ -208,13 +176,10 @@ static struct machdep_calls __initdata *machines[] = { void __init early_setup(unsigned long dt_ptr) { - struct paca_struct *lpaca = get_paca(); - static struct machdep_calls **mach; - /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); - DBG(" -> early_setup()\n"); + DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr); /* * Do early initializations using the flattened device @@ -223,22 +188,16 @@ void __init early_setup(unsigned long dt_ptr) */ early_init_devtree(__va(dt_ptr)); - /* - * Iterate all ppc_md structures until we find the proper - * one for the current machine type - */ - DBG("Probing machine type for platform %x...\n", _machine); + /* Now we know the logical id of our boot cpu, setup the paca. */ + setup_boot_paca(); - for (mach = machines; *mach; mach++) { - if ((*mach)->probe(_machine)) - break; - } - /* What can we do if we didn't find ? */ - if (*mach == NULL) { - DBG("No suitable machine found !\n"); - for (;;); - } - ppc_md = **mach; + /* Fix up paca fields required for the boot cpu */ + get_paca()->cpu_start = 1; + get_paca()->stab_real = __pa((u64)&initial_stab); + get_paca()->stab_addr = (u64)&initial_stab; + + /* Probe the machine type */ + probe_machine(); #ifdef CONFIG_CRASH_DUMP kdump_setup(); @@ -260,7 +219,7 @@ void __init early_setup(unsigned long dt_ptr) if (cpu_has_feature(CPU_FTR_SLB)) slb_initialize(); else - stab_initialize(lpaca->stab_real); + stab_initialize(get_paca()->stab_real); } DBG(" <- early_setup()\n"); @@ -340,7 +299,7 @@ static void __init initialize_cache_info(void) const char *dc, *ic; /* Then read cache informations */ - if (_machine == PLATFORM_POWERMAC) { + if (machine_is(powermac)) { dc = "d-cache-block-size"; ic = "i-cache-block-size"; } else { @@ -484,7 +443,6 @@ void __init setup_system(void) printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller); - printk("platform = 0x%x\n", _machine); printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size()); printk("ppc64_caches.dcache_line_size = 0x%x\n", ppc64_caches.dline_size); @@ -516,7 +474,7 @@ static void __init irqstack_early_init(void) * interrupt stacks must be under 256MB, we cannot afford to take * SLB misses on them. */ - for_each_cpu(i) { + for_each_possible_cpu(i) { softirq_ctx[i] = (struct thread_info *) __va(lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, 0x10000000)); @@ -549,7 +507,7 @@ static void __init emergency_stack_init(void) */ limit = min(0x10000000UL, lmb.rmo_size); - for_each_cpu(i) + for_each_possible_cpu(i) paca[i].emergency_sp = __va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE; } @@ -579,7 +537,8 @@ void __init setup_arch(char **cmdline_p) panic_timeout = 180; if (ppc_md.panic) - notifier_chain_register(&panic_notifier_list, &ppc64_panic_block); + atomic_notifier_chain_register(&panic_notifier_list, + &ppc64_panic_block); init_mm.start_code = PAGE_OFFSET; init_mm.end_code = (unsigned long) _etext; @@ -601,12 +560,6 @@ void __init setup_arch(char **cmdline_p) ppc_md.setup_arch(); - /* Use the default idle loop if the platform hasn't provided one. */ - if (NULL == ppc_md.idle_loop) { - ppc_md.idle_loop = default_idle; - printk(KERN_INFO "Using default idle loop\n"); - } - paging_init(); ppc64_boot_msg(0x15, "Setup Done"); } @@ -671,7 +624,7 @@ void __init setup_per_cpu_areas(void) size = PERCPU_ENOUGH_ROOM; #endif - for_each_cpu(i) { + for_each_possible_cpu(i) { ptr = alloc_bootmem_node(NODE_DATA(cpu_to_node(i)), size); if (!ptr) panic("Cannot allocate cpu data for CPU %d\n", i); diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index d7a4e814974..01e3c08cb55 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -42,6 +42,7 @@ #include <asm/uaccess.h> #include <asm/cacheflush.h> +#include <asm/syscalls.h> #include <asm/sigcontext.h> #include <asm/vdso.h> #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 47f910380a6..27f65b95184 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -33,6 +33,7 @@ #include <asm/pgtable.h> #include <asm/unistd.h> #include <asm/cacheflush.h> +#include <asm/syscalls.h> #include <asm/vdso.h> #define DEBUG_SIG 0 @@ -211,7 +212,7 @@ static inline void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs /* Default to using normal stack */ newsp = regs->gpr[1]; - if (ka->sa.sa_flags & SA_ONSTACK) { + if ((ka->sa.sa_flags & SA_ONSTACK) && current->sas_ss_size) { if (! on_sig_stack(regs->gpr[1])) newsp = (current->sas_ss_sp + current->sas_ss_size); } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 805eaedbc30..530f7dba0bd 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -362,7 +362,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_space_timers(max_cpus); - for_each_cpu(cpu) + for_each_possible_cpu(cpu) if (cpu != boot_cpuid) smp_create_idle(cpu); } diff --git a/arch/ppc/kernel/swsusp.S b/arch/powerpc/kernel/swsusp_32.S index 69773cc1a85..69773cc1a85 100644 --- a/arch/ppc/kernel/swsusp.S +++ b/arch/powerpc/kernel/swsusp_32.S diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index cd75ab2908f..ec274e68881 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -24,7 +24,6 @@ #include <linux/resource.h> #include <linux/times.h> #include <linux/utsname.h> -#include <linux/timex.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/sem.h> @@ -161,78 +160,6 @@ asmlinkage long compat_sys_sysfs(u32 option, u32 arg1, u32 arg2) return sys_sysfs((int)option, arg1, arg2); } -/* Handle adjtimex compatibility. */ -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - -extern int do_adjtimex(struct timex *); - -asmlinkage long compat_sys_adjtimex(struct timex32 __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if(get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if(put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - asmlinkage long compat_sys_pause(void) { current->state = TASK_INTERRUPTIBLE; diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index ad895c99813..9b69d99a910 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -40,6 +40,7 @@ #include <asm/uaccess.h> #include <asm/ipc.h> #include <asm/semaphore.h> +#include <asm/syscalls.h> #include <asm/time.h> #include <asm/unistd.h> diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 0f0c3a9ae2e..73560ef6f80 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -65,20 +65,20 @@ static int __init smt_setup(void) unsigned int cpu; if (!cpu_has_feature(CPU_FTR_SMT)) - return 1; + return -ENODEV; options = find_path_device("/options"); if (!options) - return 1; + return -ENODEV; val = (unsigned int *)get_property(options, "ibm,smt-snooze-delay", NULL); if (!smt_snooze_cmdline && val) { - for_each_cpu(cpu) + for_each_possible_cpu(cpu) per_cpu(smt_snooze_delay, cpu) = *val; } - return 1; + return 0; } __initcall(smt_setup); @@ -93,7 +93,7 @@ static int __init setup_smt_snooze_delay(char *str) smt_snooze_cmdline = 1; if (get_option(&str, &snooze)) { - for_each_cpu(cpu) + for_each_possible_cpu(cpu) per_cpu(smt_snooze_delay, cpu) = snooze; } @@ -347,7 +347,7 @@ static int __init topology_init(void) register_cpu_notifier(&sysfs_cpu_nb); - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); #ifdef CONFIG_NUMA diff --git a/arch/ppc/kernel/temp.c b/arch/powerpc/kernel/tau_6xx.c index 26bd8ea35a4..26bd8ea35a4 100644 --- a/arch/ppc/kernel/temp.c +++ b/arch/powerpc/kernel/tau_6xx.c diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 4a27218a086..24e3ad756de 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -261,7 +261,7 @@ void snapshot_timebases(void) if (!cpu_has_feature(CPU_FTR_PURR)) return; - for_each_cpu(cpu) + for_each_possible_cpu(cpu) spin_lock_init(&per_cpu(cpu_purr_data, cpu).lock); on_each_cpu(snapshot_tb_and_purr, NULL, 0, 1); } @@ -751,7 +751,7 @@ void __init smp_space_timers(unsigned int max_cpus) * systems works better if the two threads' timebase interrupts * are staggered by half a jiffy with respect to each other. */ - for_each_cpu(i) { + for_each_possible_cpu(i) { if (i == boot_cpuid) continue; if (i == (boot_cpuid ^ 1)) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 98660aedeeb..4cbde211eb6 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -74,19 +74,19 @@ EXPORT_SYMBOL(__debugger_dabr_match); EXPORT_SYMBOL(__debugger_fault_handler); #endif -struct notifier_block *powerpc_die_chain; -static DEFINE_SPINLOCK(die_notifier_lock); +ATOMIC_NOTIFIER_HEAD(powerpc_die_chain); int register_die_notifier(struct notifier_block *nb) { - int err = 0; - unsigned long flags; + return atomic_notifier_chain_register(&powerpc_die_chain, nb); +} +EXPORT_SYMBOL(register_die_notifier); - spin_lock_irqsave(&die_notifier_lock, flags); - err = notifier_chain_register(&powerpc_die_chain, nb); - spin_unlock_irqrestore(&die_notifier_lock, flags); - return err; +int unregister_die_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&powerpc_die_chain, nb); } +EXPORT_SYMBOL(unregister_die_notifier); /* * Trap & Exception support @@ -97,7 +97,6 @@ static DEFINE_SPINLOCK(die_lock); int die(const char *str, struct pt_regs *regs, long err) { static int die_counter, crash_dump_start = 0; - int nl = 0; if (debugger(regs)) return 1; @@ -106,7 +105,7 @@ int die(const char *str, struct pt_regs *regs, long err) spin_lock_irq(&die_lock); bust_spinlocks(1); #ifdef CONFIG_PMAC_BACKLIGHT - if (_machine == _MACH_Pmac) { + if (machine_is(powermac)) { set_backlight_enable(1); set_backlight_level(BACKLIGHT_MAX); } @@ -114,46 +113,18 @@ int die(const char *str, struct pt_regs *regs, long err) printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); #ifdef CONFIG_PREEMPT printk("PREEMPT "); - nl = 1; #endif #ifdef CONFIG_SMP printk("SMP NR_CPUS=%d ", NR_CPUS); - nl = 1; #endif #ifdef CONFIG_DEBUG_PAGEALLOC printk("DEBUG_PAGEALLOC "); - nl = 1; #endif #ifdef CONFIG_NUMA printk("NUMA "); - nl = 1; #endif -#ifdef CONFIG_PPC64 - switch (_machine) { - case PLATFORM_PSERIES: - printk("PSERIES "); - nl = 1; - break; - case PLATFORM_PSERIES_LPAR: - printk("PSERIES LPAR "); - nl = 1; - break; - case PLATFORM_ISERIES_LPAR: - printk("ISERIES LPAR "); - nl = 1; - break; - case PLATFORM_POWERMAC: - printk("POWERMAC "); - nl = 1; - break; - case PLATFORM_CELL: - printk("CELL "); - nl = 1; - break; - } -#endif - if (nl) - printk("\n"); + printk("%s\n", ppc_md.name ? "" : ppc_md.name); + print_modules(); show_regs(regs); bust_spinlocks(0); diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index ec837036842..573afb68d69 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -33,6 +33,7 @@ #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/sections.h> +#include <asm/firmware.h> #include <asm/vdso.h> #include <asm/vdso_datapage.h> @@ -667,7 +668,13 @@ void __init vdso_init(void) vdso_data->version.major = SYSTEMCFG_MAJOR; vdso_data->version.minor = SYSTEMCFG_MINOR; vdso_data->processor = mfspr(SPRN_PVR); - vdso_data->platform = _machine; + /* + * Fake the old platform number for pSeries and iSeries and add + * in LPAR bit if necessary + */ + vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100; + if (firmware_has_feature(FW_FEATURE_LPAR)) + vdso_data->platform |= 1; vdso_data->physicalMemorySize = lmb_phys_mem_size(); vdso_data->dcache_size = ppc64_caches.dsize; vdso_data->dcache_line_size = ppc64_caches.dline_size; diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 7fa7b15fd8e..fe79c2584cb 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -1,9 +1,11 @@ #include <linux/config.h> #ifdef CONFIG_PPC64 #include <asm/page.h> +#define PROVIDE32(x) PROVIDE(__unused__##x) #else #define PAGE_SIZE 4096 #define KERNELBASE CONFIG_KERNEL_START +#define PROVIDE32(x) PROVIDE(x) #endif #include <asm-generic/vmlinux.lds.h> @@ -18,43 +20,42 @@ jiffies = jiffies_64 + 4; #endif SECTIONS { - /* Sections to be discarded. */ - /DISCARD/ : { - *(.exitcall.exit) - *(.exit.data) - } - - . = KERNELBASE; - - /* Read-only sections, merged into text segment: */ - .text : { - *(.text .text.*) - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.fixup) -#ifdef CONFIG_PPC32 - *(.got1) - __got2_start = .; - *(.got2) - __got2_end = .; -#else - . = ALIGN(PAGE_SIZE); - _etext = .; -#endif - } -#ifdef CONFIG_PPC32 - _etext = .; - PROVIDE (etext = .); + /* Sections to be discarded. */ + /DISCARD/ : { + *(.exitcall.exit) + *(.exit.data) + } - RODATA - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } + . = KERNELBASE; - .fixup : { *(.fixup) } -#endif +/* + * Text, read only data and other permanent read-only sections + */ + + /* Text and gots */ + .text : { + *(.text .text.*) + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.fixup) +#ifdef CONFIG_PPC32 + *(.got1) + __got2_start = .; + *(.got2) + __got2_end = .; +#endif /* CONFIG_PPC32 */ + + . = ALIGN(PAGE_SIZE); + _etext = .; + PROVIDE32 (etext = .); + } + + /* Read-only data */ + RODATA + + /* Exception & bug tables */ __ex_table : { __start___ex_table = .; *(__ex_table) @@ -67,192 +68,172 @@ SECTIONS __stop___bug_table = .; } -#ifdef CONFIG_PPC64 +/* + * Init sections discarded at runtime + */ + . = ALIGN(PAGE_SIZE); + __init_begin = .; + + .init.text : { + _sinittext = .; + *(.init.text) + _einittext = .; + } + + /* .exit.text is discarded at runtime, not link time, + * to deal with references from __bug_table + */ + .exit.text : { *(.exit.text) } + + .init.data : { + *(.init.data); + __vtop_table_begin = .; + *(.vtop_fixup); + __vtop_table_end = .; + __ptov_table_begin = .; + *(.ptov_fixup); + __ptov_table_end = .; + } + + . = ALIGN(16); + .init.setup : { + __setup_start = .; + *(.init.setup) + __setup_end = .; + } + + .initcall.init : { + __initcall_start = .; + *(.initcall1.init) + *(.initcall2.init) + *(.initcall3.init) + *(.initcall4.init) + *(.initcall5.init) + *(.initcall6.init) + *(.initcall7.init) + __initcall_end = .; + } + + .con_initcall.init : { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + + SECURITY_INIT + + . = ALIGN(8); __ftr_fixup : { __start___ftr_fixup = .; *(__ftr_fixup) __stop___ftr_fixup = .; } - RODATA -#endif + . = ALIGN(PAGE_SIZE); + .init.ramfs : { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } #ifdef CONFIG_PPC32 - /* Read-write section, merged into data segment: */ - . = ALIGN(PAGE_SIZE); - _sdata = .; - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.got.plt) *(.got) - *(.dynamic) - CONSTRUCTORS - } - - . = ALIGN(PAGE_SIZE); - __nosave_begin = .; - .data_nosave : { *(.data.nosave) } - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - - . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } - - _edata = .; - PROVIDE (edata = .); - - . = ALIGN(8192); - .data.init_task : { *(.data.init_task) } + . = ALIGN(32); +#else + . = ALIGN(128); #endif + .data.percpu : { + __per_cpu_start = .; + *(.data.percpu) + __per_cpu_end = .; + } - /* will be freed after init */ - . = ALIGN(PAGE_SIZE); - __init_begin = .; - .init.text : { - _sinittext = .; - *(.init.text) - _einittext = .; - } -#ifdef CONFIG_PPC32 - /* .exit.text is discarded at runtime, not link time, - to deal with references from __bug_table */ - .exit.text : { *(.exit.text) } -#endif - .init.data : { - *(.init.data); - __vtop_table_begin = .; - *(.vtop_fixup); - __vtop_table_end = .; - __ptov_table_begin = .; - *(.ptov_fixup); - __ptov_table_end = .; - } - - . = ALIGN(16); - .init.setup : { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - - .initcall.init : { - __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) - __initcall_end = .; - } - - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - - SECURITY_INIT + . = ALIGN(8); + .machine.desc : { + __machine_desc_start = . ; + *(.machine.desc) + __machine_desc_end = . ; + } + + /* freed after init ends here */ + . = ALIGN(PAGE_SIZE); + __init_end = .; + +/* + * And now the various read/write data + */ + + . = ALIGN(PAGE_SIZE); + _sdata = .; #ifdef CONFIG_PPC32 - __start___ftr_fixup = .; - __ftr_fixup : { *(__ftr_fixup) } - __stop___ftr_fixup = .; + .data : + { + *(.data) + *(.sdata) + *(.got.plt) *(.got) + } #else - . = ALIGN(PAGE_SIZE); - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif + .data : { + *(.data .data.rel* .toc1) + *(.branch_lt) + } -#ifdef CONFIG_PPC32 - . = ALIGN(32); + .opd : { + *(.opd) + } + + .got : { + __toc_start = .; + *(.got) + *(.toc) + } #endif - .data.percpu : { - __per_cpu_start = .; - *(.data.percpu) - __per_cpu_end = .; - } - . = ALIGN(PAGE_SIZE); -#ifdef CONFIG_PPC64 - . = ALIGN(16384); - __init_end = .; - /* freed after init ends here */ - - /* Read/write sections */ - . = ALIGN(PAGE_SIZE); - . = ALIGN(16384); - _sdata = .; - /* The initial task and kernel stack */ - .data.init_task : { - *(.data.init_task) - } - - . = ALIGN(PAGE_SIZE); - .data.page_aligned : { - *(.data.page_aligned) - } - - .data.cacheline_aligned : { - *(.data.cacheline_aligned) - } - - .data : { - *(.data .data.rel* .toc1) - *(.branch_lt) - } - - .opd : { - *(.opd) - } - - .got : { - __toc_start = .; - *(.got) - *(.toc) - . = ALIGN(PAGE_SIZE); - _edata = .; - } - - . = ALIGN(PAGE_SIZE); + . = ALIGN(PAGE_SIZE); + _edata = .; + PROVIDE32 (edata = .); + + /* The initial task and kernel stack */ +#ifdef CONFIG_PPC32 + . = ALIGN(8192); #else - __initramfs_start = .; - .init.ramfs : { - *(.init.ramfs) - } - __initramfs_end = .; + . = ALIGN(16384); +#endif + .data.init_task : { + *(.data.init_task) + } - . = ALIGN(4096); - __init_end = .; + . = ALIGN(PAGE_SIZE); + .data.page_aligned : { + *(.data.page_aligned) + } - . = ALIGN(4096); - _sextratext = .; - _eextratext = .; + .data.cacheline_aligned : { + *(.data.cacheline_aligned) + } - __bss_start = .; -#endif + . = ALIGN(PAGE_SIZE); + __data_nosave : { + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(PAGE_SIZE); + __nosave_end = .; + } - .bss : { - __bss_start = .; - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - __bss_stop = .; - } +/* + * And finally the bss + */ + + .bss : { + __bss_start = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + __bss_stop = .; + } -#ifdef CONFIG_PPC64 - . = ALIGN(PAGE_SIZE); -#endif - _end = . ; -#ifdef CONFIG_PPC32 - PROVIDE (end = .); -#endif + . = ALIGN(PAGE_SIZE); + _end = . ; + PROVIDE32 (end = .); } diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index 666c2aa5501..c251d993661 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -18,7 +18,7 @@ extern char system_call_common[]; #ifdef CONFIG_PPC64 /* Bits in SRR1 that are copied from MSR */ -#define MSR_MASK 0xffffffff87c0ffff +#define MSR_MASK 0xffffffff87c0ffffUL #else #define MSR_MASK 0x87c0ffff #endif diff --git a/arch/powerpc/lib/strcase.c b/arch/powerpc/lib/strcase.c index 36b521091bb..f8ec1eba3fd 100644 --- a/arch/powerpc/lib/strcase.c +++ b/arch/powerpc/lib/strcase.c @@ -1,4 +1,6 @@ +#include <linux/types.h> #include <linux/ctype.h> +#include <linux/string.h> int strcasecmp(const char *s1, const char *s2) { @@ -11,7 +13,7 @@ int strcasecmp(const char *s1, const char *s2) return c1 - c2; } -int strncasecmp(const char *s1, const char *s2, int n) +int strncasecmp(const char *s1, const char *s2, size_t n) { int c1, c2; diff --git a/arch/ppc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile index 754143e8936..754143e8936 100644 --- a/arch/ppc/math-emu/Makefile +++ b/arch/powerpc/math-emu/Makefile diff --git a/arch/ppc/math-emu/double.h b/arch/powerpc/math-emu/double.h index ffba8b67f05..ffba8b67f05 100644 --- a/arch/ppc/math-emu/double.h +++ b/arch/powerpc/math-emu/double.h diff --git a/arch/ppc/math-emu/fabs.c b/arch/powerpc/math-emu/fabs.c index 41f0617f3d3..41f0617f3d3 100644 --- a/arch/ppc/math-emu/fabs.c +++ b/arch/powerpc/math-emu/fabs.c diff --git a/arch/ppc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c index fc8836488b6..fc8836488b6 100644 --- a/arch/ppc/math-emu/fadd.c +++ b/arch/powerpc/math-emu/fadd.c diff --git a/arch/ppc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c index 93025b6c8f3..93025b6c8f3 100644 --- a/arch/ppc/math-emu/fadds.c +++ b/arch/powerpc/math-emu/fadds.c diff --git a/arch/ppc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c index 4efac394b4c..4efac394b4c 100644 --- a/arch/ppc/math-emu/fcmpo.c +++ b/arch/powerpc/math-emu/fcmpo.c diff --git a/arch/ppc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c index b7e33176e61..b7e33176e61 100644 --- a/arch/ppc/math-emu/fcmpu.c +++ b/arch/powerpc/math-emu/fcmpu.c diff --git a/arch/ppc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c index 3b3c98b840c..3b3c98b840c 100644 --- a/arch/ppc/math-emu/fctiw.c +++ b/arch/powerpc/math-emu/fctiw.c diff --git a/arch/ppc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c index 7717eb6fcfb..7717eb6fcfb 100644 --- a/arch/ppc/math-emu/fctiwz.c +++ b/arch/powerpc/math-emu/fctiwz.c diff --git a/arch/ppc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c index f2fba825b2d..f2fba825b2d 100644 --- a/arch/ppc/math-emu/fdiv.c +++ b/arch/powerpc/math-emu/fdiv.c diff --git a/arch/ppc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c index b971196e317..b971196e317 100644 --- a/arch/ppc/math-emu/fdivs.c +++ b/arch/powerpc/math-emu/fdivs.c diff --git a/arch/ppc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c index 0a1dbce793e..0a1dbce793e 100644 --- a/arch/ppc/math-emu/fmadd.c +++ b/arch/powerpc/math-emu/fmadd.c diff --git a/arch/ppc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c index 0f70bba9445..0f70bba9445 100644 --- a/arch/ppc/math-emu/fmadds.c +++ b/arch/powerpc/math-emu/fmadds.c diff --git a/arch/ppc/math-emu/fmr.c b/arch/powerpc/math-emu/fmr.c index 28df700c0c7..28df700c0c7 100644 --- a/arch/ppc/math-emu/fmr.c +++ b/arch/powerpc/math-emu/fmr.c diff --git a/arch/ppc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c index 203fd48a6fe..203fd48a6fe 100644 --- a/arch/ppc/math-emu/fmsub.c +++ b/arch/powerpc/math-emu/fmsub.c diff --git a/arch/ppc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c index 8ce68624c18..8ce68624c18 100644 --- a/arch/ppc/math-emu/fmsubs.c +++ b/arch/powerpc/math-emu/fmsubs.c diff --git a/arch/ppc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c index 66c7e79aae2..66c7e79aae2 100644 --- a/arch/ppc/math-emu/fmul.c +++ b/arch/powerpc/math-emu/fmul.c diff --git a/arch/ppc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c index 26bc4278271..26bc4278271 100644 --- a/arch/ppc/math-emu/fmuls.c +++ b/arch/powerpc/math-emu/fmuls.c diff --git a/arch/ppc/math-emu/fnabs.c b/arch/powerpc/math-emu/fnabs.c index c6b913d179e..c6b913d179e 100644 --- a/arch/ppc/math-emu/fnabs.c +++ b/arch/powerpc/math-emu/fnabs.c diff --git a/arch/ppc/math-emu/fneg.c b/arch/powerpc/math-emu/fneg.c index fe9a98deff6..fe9a98deff6 100644 --- a/arch/ppc/math-emu/fneg.c +++ b/arch/powerpc/math-emu/fneg.c diff --git a/arch/ppc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c index 7f312276d92..7f312276d92 100644 --- a/arch/ppc/math-emu/fnmadd.c +++ b/arch/powerpc/math-emu/fnmadd.c diff --git a/arch/ppc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c index 65454c9c70b..65454c9c70b 100644 --- a/arch/ppc/math-emu/fnmadds.c +++ b/arch/powerpc/math-emu/fnmadds.c diff --git a/arch/ppc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c index f1ca7482b5f..f1ca7482b5f 100644 --- a/arch/ppc/math-emu/fnmsub.c +++ b/arch/powerpc/math-emu/fnmsub.c diff --git a/arch/ppc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c index 5c9a09a87dc..5c9a09a87dc 100644 --- a/arch/ppc/math-emu/fnmsubs.c +++ b/arch/powerpc/math-emu/fnmsubs.c diff --git a/arch/ppc/math-emu/fres.c b/arch/powerpc/math-emu/fres.c index ec11e46d20a..ec11e46d20a 100644 --- a/arch/ppc/math-emu/fres.c +++ b/arch/powerpc/math-emu/fres.c diff --git a/arch/ppc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c index d879b2a3d0c..d879b2a3d0c 100644 --- a/arch/ppc/math-emu/frsp.c +++ b/arch/powerpc/math-emu/frsp.c diff --git a/arch/ppc/math-emu/frsqrte.c b/arch/powerpc/math-emu/frsqrte.c index a11ae182985..a11ae182985 100644 --- a/arch/ppc/math-emu/frsqrte.c +++ b/arch/powerpc/math-emu/frsqrte.c diff --git a/arch/ppc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c index e36e6e72819..e36e6e72819 100644 --- a/arch/ppc/math-emu/fsel.c +++ b/arch/powerpc/math-emu/fsel.c diff --git a/arch/ppc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c index 6f8319f64a8..6f8319f64a8 100644 --- a/arch/ppc/math-emu/fsqrt.c +++ b/arch/powerpc/math-emu/fsqrt.c diff --git a/arch/ppc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c index 3b2b1cf55c1..3b2b1cf55c1 100644 --- a/arch/ppc/math-emu/fsqrts.c +++ b/arch/powerpc/math-emu/fsqrts.c diff --git a/arch/ppc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c index 956679042bb..956679042bb 100644 --- a/arch/ppc/math-emu/fsub.c +++ b/arch/powerpc/math-emu/fsub.c diff --git a/arch/ppc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c index 3428117dfe8..3428117dfe8 100644 --- a/arch/ppc/math-emu/fsubs.c +++ b/arch/powerpc/math-emu/fsubs.c diff --git a/arch/ppc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c index 7d38101c329..7d38101c329 100644 --- a/arch/ppc/math-emu/lfd.c +++ b/arch/powerpc/math-emu/lfd.c diff --git a/arch/ppc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c index c86dee3d765..c86dee3d765 100644 --- a/arch/ppc/math-emu/lfs.c +++ b/arch/powerpc/math-emu/lfs.c diff --git a/arch/ppc/math-emu/math.c b/arch/powerpc/math-emu/math.c index 58915347276..58915347276 100644 --- a/arch/ppc/math-emu/math.c +++ b/arch/powerpc/math-emu/math.c diff --git a/arch/ppc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c index 106dd912914..106dd912914 100644 --- a/arch/ppc/math-emu/mcrfs.c +++ b/arch/powerpc/math-emu/mcrfs.c diff --git a/arch/ppc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c index f477c9170e7..f477c9170e7 100644 --- a/arch/ppc/math-emu/mffs.c +++ b/arch/powerpc/math-emu/mffs.c diff --git a/arch/ppc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c index 99bfd80f4af..99bfd80f4af 100644 --- a/arch/ppc/math-emu/mtfsb0.c +++ b/arch/powerpc/math-emu/mtfsb0.c diff --git a/arch/ppc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c index 3d9e7ed92d2..3d9e7ed92d2 100644 --- a/arch/ppc/math-emu/mtfsb1.c +++ b/arch/powerpc/math-emu/mtfsb1.c diff --git a/arch/ppc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c index d70cf714994..d70cf714994 100644 --- a/arch/ppc/math-emu/mtfsf.c +++ b/arch/powerpc/math-emu/mtfsf.c diff --git a/arch/ppc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c index 71df854baa7..71df854baa7 100644 --- a/arch/ppc/math-emu/mtfsfi.c +++ b/arch/powerpc/math-emu/mtfsfi.c diff --git a/arch/ppc/math-emu/op-1.h b/arch/powerpc/math-emu/op-1.h index c92fa95f562..c92fa95f562 100644 --- a/arch/ppc/math-emu/op-1.h +++ b/arch/powerpc/math-emu/op-1.h diff --git a/arch/ppc/math-emu/op-2.h b/arch/powerpc/math-emu/op-2.h index b9b06b4c6ea..b9b06b4c6ea 100644 --- a/arch/ppc/math-emu/op-2.h +++ b/arch/powerpc/math-emu/op-2.h diff --git a/arch/ppc/math-emu/op-4.h b/arch/powerpc/math-emu/op-4.h index fcdd6d064c5..fcdd6d064c5 100644 --- a/arch/ppc/math-emu/op-4.h +++ b/arch/powerpc/math-emu/op-4.h diff --git a/arch/ppc/math-emu/op-common.h b/arch/powerpc/math-emu/op-common.h index afb82b6498c..afb82b6498c 100644 --- a/arch/ppc/math-emu/op-common.h +++ b/arch/powerpc/math-emu/op-common.h diff --git a/arch/ppc/math-emu/sfp-machine.h b/arch/powerpc/math-emu/sfp-machine.h index 4b17d83cfcd..4b17d83cfcd 100644 --- a/arch/ppc/math-emu/sfp-machine.h +++ b/arch/powerpc/math-emu/sfp-machine.h diff --git a/arch/ppc/math-emu/single.h b/arch/powerpc/math-emu/single.h index f19d9945181..f19d9945181 100644 --- a/arch/ppc/math-emu/single.h +++ b/arch/powerpc/math-emu/single.h diff --git a/arch/ppc/math-emu/soft-fp.h b/arch/powerpc/math-emu/soft-fp.h index cca39598f87..cca39598f87 100644 --- a/arch/ppc/math-emu/soft-fp.h +++ b/arch/powerpc/math-emu/soft-fp.h diff --git a/arch/ppc/math-emu/stfd.c b/arch/powerpc/math-emu/stfd.c index 3f8c2558a9e..3f8c2558a9e 100644 --- a/arch/ppc/math-emu/stfd.c +++ b/arch/powerpc/math-emu/stfd.c diff --git a/arch/ppc/math-emu/stfiwx.c b/arch/powerpc/math-emu/stfiwx.c index 95caaeec6a0..95caaeec6a0 100644 --- a/arch/ppc/math-emu/stfiwx.c +++ b/arch/powerpc/math-emu/stfiwx.c diff --git a/arch/ppc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c index e87ca23c6dc..e87ca23c6dc 100644 --- a/arch/ppc/math-emu/stfs.c +++ b/arch/powerpc/math-emu/stfs.c diff --git a/arch/ppc/math-emu/types.c b/arch/powerpc/math-emu/types.c index e1ed15d829d..e1ed15d829d 100644 --- a/arch/ppc/math-emu/types.c +++ b/arch/powerpc/math-emu/types.c diff --git a/arch/ppc/math-emu/udivmodti4.c b/arch/powerpc/math-emu/udivmodti4.c index 7e112dc1e2f..7e112dc1e2f 100644 --- a/arch/ppc/math-emu/udivmodti4.c +++ b/arch/powerpc/math-emu/udivmodti4.c diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index ec4adcb4bc2..5aea0909a5e 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -267,25 +267,29 @@ good_area: #endif #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) pte_t *ptep; + pmd_t *pmdp; /* Since 4xx/Book-E supports per-page execute permission, * we lazily flush dcache to icache. */ ptep = NULL; - if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) { - struct page *page = pte_page(*ptep); - - if (! test_bit(PG_arch_1, &page->flags)) { - flush_dcache_icache_page(page); - set_bit(PG_arch_1, &page->flags); + if (get_pteptr(mm, address, &ptep, &pmdp)) { + spinlock_t *ptl = pte_lockptr(mm, pmdp); + spin_lock(ptl); + if (pte_present(*ptep)) { + struct page *page = pte_page(*ptep); + + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } + pte_update(ptep, 0, _PAGE_HWEXEC); + _tlbie(address); + pte_unmap_unlock(ptep, ptl); + up_read(&mm->mmap_sem); + return 0; } - pte_update(ptep, 0, _PAGE_HWEXEC); - _tlbie(address); - pte_unmap(ptep); - up_read(&mm->mmap_sem); - return 0; + pte_unmap_unlock(ptep, ptl); } - if (ptep != NULL) - pte_unmap(ptep); #endif /* a write */ } else if (is_write) { diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 89b35c18131..c006d903963 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -167,7 +167,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, * normal insert callback here. */ #ifdef CONFIG_PPC_ISERIES - if (_machine == PLATFORM_ISERIES_LPAR) + if (machine_is(iseries)) ret = iSeries_hpte_insert(hpteg, va, paddr, tmp_mode, @@ -176,7 +176,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, else #endif #ifdef CONFIG_PPC_PSERIES - if (_machine & PLATFORM_LPAR) + if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) ret = pSeries_lpar_hpte_insert(hpteg, va, paddr, tmp_mode, @@ -295,8 +295,7 @@ static void __init htab_init_page_sizes(void) * Not in the device-tree, let's fallback on known size * list for 16M capable GP & GR */ - if ((_machine != PLATFORM_ISERIES_LPAR) && - cpu_has_feature(CPU_FTR_16M_PAGE)) + if (cpu_has_feature(CPU_FTR_16M_PAGE) && !machine_is(iseries)) memcpy(mmu_psize_defs, mmu_psize_defaults_gp, sizeof(mmu_psize_defaults_gp)); found: diff --git a/arch/powerpc/mm/imalloc.c b/arch/powerpc/mm/imalloc.c index 8b0c132bc16..add8c1a9af6 100644 --- a/arch/powerpc/mm/imalloc.c +++ b/arch/powerpc/mm/imalloc.c @@ -13,12 +13,12 @@ #include <asm/uaccess.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #include <asm/cacheflush.h> #include "mmu_decl.h" -static DECLARE_MUTEX(imlist_sem); +static DEFINE_MUTEX(imlist_mutex); struct vm_struct * imlist = NULL; static int get_free_im_addr(unsigned long size, unsigned long *im_addr) @@ -257,7 +257,7 @@ struct vm_struct * im_get_free_area(unsigned long size) struct vm_struct *area; unsigned long addr; - down(&imlist_sem); + mutex_lock(&imlist_mutex); if (get_free_im_addr(size, &addr)) { printk(KERN_ERR "%s() cannot obtain addr for size 0x%lx\n", __FUNCTION__, size); @@ -272,7 +272,7 @@ struct vm_struct * im_get_free_area(unsigned long size) __FUNCTION__, addr, size); } next_im_done: - up(&imlist_sem); + mutex_unlock(&imlist_mutex); return area; } @@ -281,9 +281,9 @@ struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size, { struct vm_struct *area; - down(&imlist_sem); + mutex_lock(&imlist_mutex); area = __im_get_area(v_addr, size, criteria); - up(&imlist_sem); + mutex_unlock(&imlist_mutex); return area; } @@ -297,17 +297,17 @@ void im_free(void * addr) printk(KERN_ERR "Trying to %s bad address (%p)\n", __FUNCTION__, addr); return; } - down(&imlist_sem); + mutex_lock(&imlist_mutex); for (p = &imlist ; (tmp = *p) ; p = &tmp->next) { if (tmp->addr == addr) { *p = tmp->next; unmap_vm_area(tmp); kfree(tmp); - up(&imlist_sem); + mutex_unlock(&imlist_mutex); return; } } - up(&imlist_sem); + mutex_unlock(&imlist_mutex); printk(KERN_ERR "Trying to %s nonexistent area (%p)\n", __FUNCTION__, addr); } diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index badac10d700..741dd8802d4 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -195,7 +195,7 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { unsigned long flags; pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; i++) { @@ -342,7 +342,7 @@ void __init mem_init(void) #ifdef CONFIG_NEED_MULTIPLE_NODES for_each_online_node(nid) { if (NODE_DATA(nid)->node_spanned_pages != 0) { - printk("freeing bootmem node %x\n", nid); + printk("freeing bootmem node %d\n", nid); totalram_pages += free_all_bootmem_node(NODE_DATA(nid)); } @@ -351,7 +351,7 @@ void __init mem_init(void) max_mapnr = max_pfn; totalram_pages += free_all_bootmem(); #endif - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { if (!pfn_valid(pgdat->node_start_pfn + i)) continue; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index e89b22aa539..0a335f34974 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -756,6 +756,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr) struct device_node *memory = NULL; nodemask_t nodes; int default_nid = any_online_node(NODE_MASK_ALL); + int nid; if (!numa_enabled || (min_common_depth < 0)) return default_nid; @@ -790,6 +791,7 @@ ha_new_range: goto ha_new_range; } BUG(); /* section address should be found above */ + return 0; /* Temporary code to ensure that returned node is not empty */ got_nid: diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index d296eb6b454..90628601fac 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -372,7 +372,7 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys, * the PTE pointer is unmodified if PTE is not found. */ int -get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep) +get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp) { pgd_t *pgd; pmd_t *pmd; @@ -387,6 +387,8 @@ get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep) if (pte) { retval = 1; *ptep = pte; + if (pmdp) + *pmdp = pmd; /* XXX caller needs to do pte_unmap, yuck */ } } @@ -424,7 +426,7 @@ unsigned long iopa(unsigned long addr) mm = &init_mm; pa = 0; - if (get_pteptr(mm, addr, &pte)) { + if (get_pteptr(mm, addr, &pte, NULL)) { pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK); pte_unmap(pte); } diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 91d25fb27f8..4a9291d9fef 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -239,7 +239,7 @@ void stabs_alloc(void) if (cpu_has_feature(CPU_FTR_SLB)) return; - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { unsigned long newstab; if (cpu == 0) diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 554cd7c7532..f5f9859a833 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -6,7 +6,7 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) common.o +oprofile-y := $(DRIVER_OBJS) common.o backtrace.o oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o oprofile-$(CONFIG_PPC32) += op_model_7450.o diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c new file mode 100644 index 00000000000..75f57bc96b4 --- /dev/null +++ b/arch/powerpc/oprofile/backtrace.c @@ -0,0 +1,126 @@ +/** + * Copyright (C) 2005 Brian Rogan <bcr6@cornell.edu>, IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. +**/ + +#include <linux/oprofile.h> +#include <linux/sched.h> +#include <asm/processor.h> +#include <asm/uaccess.h> + +#define STACK_SP(STACK) *(STACK) + +#define STACK_LR64(STACK) *((unsigned long *)(STACK) + 2) +#define STACK_LR32(STACK) *((unsigned int *)(STACK) + 1) + +#ifdef CONFIG_PPC64 +#define STACK_LR(STACK) STACK_LR64(STACK) +#else +#define STACK_LR(STACK) STACK_LR32(STACK) +#endif + +static unsigned int user_getsp32(unsigned int sp, int is_first) +{ + unsigned int stack_frame[2]; + + if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame))) + return 0; + + /* + * The most likely reason for this is that we returned -EFAULT, + * which means that we've done all that we can do from + * interrupt context. + */ + if (__copy_from_user_inatomic(stack_frame, (void *)(long)sp, + sizeof(stack_frame))) + return 0; + + if (!is_first) + oprofile_add_trace(STACK_LR32(stack_frame)); + + /* + * We do not enforce increasing stack addresses here because + * we may transition to a different stack, eg a signal handler. + */ + return STACK_SP(stack_frame); +} + +#ifdef CONFIG_PPC64 +static unsigned long user_getsp64(unsigned long sp, int is_first) +{ + unsigned long stack_frame[3]; + + if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame))) + return 0; + + if (__copy_from_user_inatomic(stack_frame, (void *)sp, + sizeof(stack_frame))) + return 0; + + if (!is_first) + oprofile_add_trace(STACK_LR64(stack_frame)); + + return STACK_SP(stack_frame); +} +#endif + +static unsigned long kernel_getsp(unsigned long sp, int is_first) +{ + unsigned long *stack_frame = (unsigned long *)sp; + + if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD)) + return 0; + + if (!is_first) + oprofile_add_trace(STACK_LR(stack_frame)); + + /* + * We do not enforce increasing stack addresses here because + * we might be transitioning from an interrupt stack to a kernel + * stack. validate_sp() is designed to understand this, so just + * use it. + */ + return STACK_SP(stack_frame); +} + +void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth) +{ + unsigned long sp = regs->gpr[1]; + int first_frame = 1; + + /* We ditch the top stackframe so need to loop through an extra time */ + depth += 1; + + if (!user_mode(regs)) { + while (depth--) { + sp = kernel_getsp(sp, first_frame); + if (!sp) + break; + first_frame = 0; + } + } else { +#ifdef CONFIG_PPC64 + if (!test_thread_flag(TIF_32BIT)) { + while (depth--) { + sp = user_getsp64(sp, first_frame); + if (!sp) + break; + first_frame = 0; + } + + return; + } +#endif + + while (depth--) { + sp = user_getsp32(sp, first_frame); + if (!sp) + break; + first_frame = 0; + } + } +} diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index cc2535be3a7..5b1de7e8041 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -117,18 +117,10 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel); oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user); -#ifdef CONFIG_PPC64 - oprofilefs_create_ulong(sb, root, "backtrace_spinlocks", - &sys.backtrace_spinlocks); -#endif /* Default to tracing both kernel and user */ sys.enable_kernel = 1; sys.enable_user = 1; -#ifdef CONFIG_PPC64 - /* Turn on backtracing through spinlocks by default */ - sys.backtrace_spinlocks = 1; -#endif return 0; } @@ -168,6 +160,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ops->shutdown = op_powerpc_shutdown; ops->start = op_powerpc_start; ops->stop = op_powerpc_stop; + ops->backtrace = op_powerpc_backtrace; printk(KERN_INFO "oprofile: using %s performance monitoring.\n", ops->cpu_type); diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c index 32abfdbb0eb..e0491c3c71f 100644 --- a/arch/powerpc/oprofile/op_model_7450.c +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -176,13 +176,13 @@ static void fsl7450_handle_interrupt(struct pt_regs *regs, mtmsr(mfmsr() | MSR_PMM); pc = mfspr(SPRN_SIAR); - is_kernel = (pc >= KERNELBASE); + is_kernel = is_kernel_addr(pc); for (i = 0; i < NUM_CTRS; ++i) { val = ctr_read(i); if (val < 0) { if (oprofile_running && ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_ext_sample(pc, regs, i, is_kernel); ctr_write(i, reset_value[i]); } else { ctr_write(i, 0); diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c index 26539cda602..93d63e62662 100644 --- a/arch/powerpc/oprofile/op_model_fsl_booke.c +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -154,13 +154,13 @@ static void fsl_booke_handle_interrupt(struct pt_regs *regs, mtmsr(mfmsr() | MSR_PMM); pc = regs->nip; - is_kernel = (pc >= KERNELBASE); + is_kernel = is_kernel_addr(pc); for (i = 0; i < num_counters; ++i) { val = ctr_read(i); if (val < 0) { if (oprofile_running && ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_ext_sample(pc, regs, i, is_kernel); ctr_write(i, reset_value[i]); } else { ctr_write(i, 0); diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 4b06e53eb9b..4c2beab1fdc 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -25,18 +25,14 @@ static unsigned long reset_value[OP_MAX_COUNTER]; static int oprofile_running; static int mmcra_has_sihv; +/* Unfortunately these bits vary between CPUs */ +static unsigned long mmcra_sihv = MMCRA_SIHV; +static unsigned long mmcra_sipr = MMCRA_SIPR; /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */ static u32 mmcr0_val; static u64 mmcr1_val; -static u32 mmcra_val; - -/* - * Since we do not have an NMI, backtracing through spinlocks is - * only a best guess. In light of this, allow it to be disabled at - * runtime. - */ -static int backtrace_spinlocks; +static u64 mmcra_val; static void power4_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, @@ -63,8 +59,6 @@ static void power4_reg_setup(struct op_counter_config *ctr, mmcr1_val = sys->mmcr1; mmcra_val = sys->mmcra; - backtrace_spinlocks = sys->backtrace_spinlocks; - for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) reset_value[i] = 0x80000000UL - ctr[i].count; @@ -197,25 +191,6 @@ static void __attribute_used__ kernel_unknown_bucket(void) { } -static unsigned long check_spinlock_pc(struct pt_regs *regs, - unsigned long profile_pc) -{ - unsigned long pc = instruction_pointer(regs); - - /* - * If both the SIAR (sampled instruction) and the perfmon exception - * occurred in a spinlock region then we account the sample to the - * calling function. This isnt 100% correct, we really need soft - * IRQ disable so we always get the perfmon exception at the - * point at which the SIAR is set. - */ - if (backtrace_spinlocks && in_lock_functions(pc) && - in_lock_functions(profile_pc)) - return regs->link; - else - return profile_pc; -} - /* * On GQ and newer the MMCRA stores the HV and PR bits at the time * the SIAR was sampled. We use that to work out if the SIAR was sampled in @@ -228,17 +203,17 @@ static unsigned long get_pc(struct pt_regs *regs) /* Cant do much about it */ if (!mmcra_has_sihv) - return check_spinlock_pc(regs, pc); + return pc; mmcra = mfspr(SPRN_MMCRA); /* Were we in the hypervisor? */ - if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & MMCRA_SIHV)) + if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & mmcra_sihv)) /* function descriptor madness */ return *((unsigned long *)hypervisor_bucket); /* We were in userspace, nothing to do */ - if (mmcra & MMCRA_SIPR) + if (mmcra & mmcra_sipr) return pc; #ifdef CONFIG_PPC_RTAS @@ -257,7 +232,7 @@ static unsigned long get_pc(struct pt_regs *regs) /* function descriptor madness */ return *((unsigned long *)kernel_unknown_bucket); - return check_spinlock_pc(regs, pc); + return pc; } static int get_kernel(unsigned long pc) @@ -268,7 +243,7 @@ static int get_kernel(unsigned long pc) is_kernel = is_kernel_addr(pc); } else { unsigned long mmcra = mfspr(SPRN_MMCRA); - is_kernel = ((mmcra & MMCRA_SIPR) == 0); + is_kernel = ((mmcra & mmcra_sipr) == 0); } return is_kernel; @@ -293,7 +268,7 @@ static void power4_handle_interrupt(struct pt_regs *regs, val = ctr_read(i); if (val < 0) { if (oprofile_running && ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_ext_sample(pc, regs, i, is_kernel); ctr_write(i, reset_value[i]); } else { ctr_write(i, 0); diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c index 5c909ee609f..042f8f4867a 100644 --- a/arch/powerpc/oprofile/op_model_rs64.c +++ b/arch/powerpc/oprofile/op_model_rs64.c @@ -175,10 +175,13 @@ static void rs64_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) { unsigned int mmcr0; + int is_kernel; int val; int i; unsigned long pc = mfspr(SPRN_SIAR); + is_kernel = is_kernel_addr(pc); + /* set the PMM bit (see comment below) */ mtmsrd(mfmsr() | MSR_PMM); @@ -186,7 +189,7 @@ static void rs64_handle_interrupt(struct pt_regs *regs, val = ctr_read(i); if (val < 0) { if (ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel_addr(pc), i); + oprofile_add_ext_sample(pc, regs, i, is_kernel); ctr_write(i, reset_value[i]); } else { ctr_write(i, 0); diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index d3d0ff745e8..06e371282f5 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -7,6 +7,7 @@ choice config MPC8540_ADS bool "Freescale MPC8540 ADS" + select DEFAULT_UIMAGE help This option enables support for the MPC 8540 ADS board diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 3157071e241..c2a3db8edb0 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -10,4 +10,9 @@ config SPU_FS Units on machines implementing the Broadband Processor Architecture. +config SPUFS_MMAP + bool + depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES + default y + endmenu diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 3b998a393e3..e570bad0639 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -6,5 +6,11 @@ obj-$(CONFIG_SPU_FS) += spu-base.o spufs/ spu-base-y += spu_base.o spu_priv1.o -builtin-spufs-$(CONFIG_SPU_FS) += spu_syscalls.o -obj-y += $(builtin-spufs-m) +# needed only when building loadable spufs.ko +spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o +obj-y += $(spufs-modular-m) + +# always needed in kernel +spufs-builtin-$(CONFIG_SPU_FS) += spu_callbacks.o +obj-y += $(spufs-builtin-y) $(spufs-builtin-m) + diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 63aa52acf44..978be1c30c1 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -63,7 +63,24 @@ static DEFINE_PER_CPU(struct iic, iic); void iic_local_enable(void) { - out_be64(&__get_cpu_var(iic).regs->prio, 0xff); + struct iic *iic = &__get_cpu_var(iic); + u64 tmp; + + /* + * There seems to be a bug that is present in DD2.x CPUs + * and still only partially fixed in DD3.1. + * This bug causes a value written to the priority register + * not to make it there, resulting in a system hang unless we + * write it again. + * Masking with 0xf0 is done because the Cell BE does not + * implement the lower four bits of the interrupt priority, + * they always read back as zeroes, although future CPUs + * might implement different bits. + */ + do { + out_be64(&iic->regs->prio, 0xff); + tmp = in_be64(&iic->regs->prio); + } while ((tmp & 0xf0) != 0xf0); } void iic_local_disable(void) @@ -123,7 +140,7 @@ static int iic_external_get_irq(struct iic_pending_bits pending) pending.class != 2) break; irq = IIC_EXT_OFFSET - + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE) + + spider_get_irq(node) + node * IIC_NODE_STRIDE; break; case 0x01 ... 0x04: @@ -174,38 +191,98 @@ int iic_get_irq(struct pt_regs *regs) return irq; } -static int setup_iic(int cpu, struct iic *iic) +/* hardcoded part to be compatible with older firmware */ + +static int setup_iic_hardcoded(void) { struct device_node *np; - int nodeid = cpu / 2; + int nodeid, cpu; unsigned long regs; + struct iic *iic; - for (np = of_find_node_by_type(NULL, "cpu"); - np; - np = of_find_node_by_type(np, "cpu")) { - if (nodeid == *(int *)get_property(np, "node-id", NULL)) - break; + for_each_cpu(cpu) { + iic = &per_cpu(iic, cpu); + nodeid = cpu/2; + + for (np = of_find_node_by_type(NULL, "cpu"); + np; + np = of_find_node_by_type(np, "cpu")) { + if (nodeid == *(int *)get_property(np, "node-id", NULL)) + break; + } + + if (!np) { + printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); + iic->regs = NULL; + iic->target_id = 0xff; + return -ENODEV; + } + + regs = *(long *)get_property(np, "iic", NULL); + + /* hack until we have decided on the devtree info */ + regs += 0x400; + if (cpu & 1) + regs += 0x20; + + printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs); + iic->regs = ioremap(regs, sizeof(struct iic_regs)); + iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); } - if (!np) { - printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); - iic->regs = NULL; - iic->target_id = 0xff; - return -ENODEV; - } + return 0; +} - regs = *(long *)get_property(np, "iic", NULL); +static int setup_iic(void) +{ + struct device_node *dn; + unsigned long *regs; + char *compatible; + unsigned *np, found = 0; + struct iic *iic = NULL; + + for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { + compatible = (char *)get_property(dn, "compatible", NULL); + + if (!compatible) { + printk(KERN_WARNING "no compatible property found !\n"); + continue; + } - /* hack until we have decided on the devtree info */ - regs += 0x400; - if (cpu & 1) - regs += 0x20; + if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller")) + regs = (unsigned long *)get_property(dn,"reg", NULL); + else + continue; - printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs); - iic->regs = __ioremap(regs, sizeof(struct iic_regs), - _PAGE_NO_CACHE); - iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); - return 0; + if (!regs) + printk(KERN_WARNING "IIC: no reg property\n"); + + np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL); + + if (!np) { + printk(KERN_WARNING "IIC: CPU association not found\n"); + iic->regs = NULL; + iic->target_id = 0xff; + return -ENODEV; + } + + iic = &per_cpu(iic, np[0]); + iic->regs = ioremap(regs[0], sizeof(struct iic_regs)); + iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe); + printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs); + + iic = &per_cpu(iic, np[1]); + iic->regs = ioremap(regs[2], sizeof(struct iic_regs)); + iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe); + printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs); + + found++; + } + + if (found) + return 0; + else + return -ENODEV; } #ifdef CONFIG_SMP @@ -283,10 +360,12 @@ void iic_init_IRQ(void) int cpu, irq_offset; struct iic *iic; + if (setup_iic() < 0) + setup_iic_hardcoded(); + irq_offset = 0; - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { iic = &per_cpu(iic, cpu); - setup_iic(cpu, iic); if (iic->regs) out_be64(&iic->regs->prio, 0xff); } diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index a14bd38791c..799f77d98f9 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -57,7 +57,7 @@ extern void iic_local_disable(void); extern u8 iic_get_target_id(int cpu); extern void spider_init_IRQ(void); -extern int spider_get_irq(unsigned long int_pending); +extern int spider_get_irq(int node); #endif #endif /* ASM_CELL_PIC_H */ diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 46e7cb9c3e6..a49ceb799a8 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -289,7 +289,7 @@ static void cell_do_map_iommu(struct cell_iommu *iommu, ioc_base = iommu->mapped_base; ioc_mmio_base = iommu->mapped_mmio_base; - for (real_address = 0, io_address = 0; + for (real_address = 0, io_address = map_start; io_address <= map_start + map_size; real_address += io_page_size, io_address += io_page_size) { ioste = get_iost_entry(fake_iopt, io_address, io_page_size); @@ -302,7 +302,7 @@ static void cell_do_map_iommu(struct cell_iommu *iommu, set_iopt_cache(ioc_mmio_base, get_ioc_hash_1way(ioste, io_address), get_ioc_tag(ioste, io_address), - get_iopt_entry(real_address-map_start, ioid, IOPT_PROT_RW)); + get_iopt_entry(real_address, ioid, IOPT_PROT_RW)); } } @@ -344,8 +344,8 @@ static int cell_map_iommu_hardcoded(int num_nodes) /* node 0 */ iommu = &cell_iommus[0]; - iommu->mapped_base = __ioremap(0x20000511000, 0x1000, _PAGE_NO_CACHE); - iommu->mapped_mmio_base = __ioremap(0x20000510000, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_base = ioremap(0x20000511000, 0x1000); + iommu->mapped_mmio_base = ioremap(0x20000510000, 0x1000); enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); @@ -357,8 +357,8 @@ static int cell_map_iommu_hardcoded(int num_nodes) /* node 1 */ iommu = &cell_iommus[1]; - iommu->mapped_base = __ioremap(0x30000511000, 0x1000, _PAGE_NO_CACHE); - iommu->mapped_mmio_base = __ioremap(0x30000510000, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_base = ioremap(0x30000511000, 0x1000); + iommu->mapped_mmio_base = ioremap(0x30000510000, 0x1000); enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); @@ -407,8 +407,8 @@ static int cell_map_iommu(void) iommu->base = *base; iommu->mmio_base = *mmio_base; - iommu->mapped_base = __ioremap(*base, 0x1000, _PAGE_NO_CACHE); - iommu->mapped_mmio_base = __ioremap(*mmio_base, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_base = ioremap(*base, 0x1000); + iommu->mapped_mmio_base = ioremap(*mmio_base, 0x1000); enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index e0e051c675d..7eed8c62451 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -203,7 +203,7 @@ found: pr_debug("pervasive area for CPU %d at %lx, size %x\n", cpu, real_address, size); - p->regs = __ioremap(real_address, size, _PAGE_NO_CACHE); + p->regs = ioremap(real_address, size); p->thread = thread; return 0; } @@ -217,7 +217,7 @@ void __init cell_pervasive_init(void) if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO)) return; - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { p = &cbe_pervasive[cpu]; ret = cbe_find_pmd_mmio(cpu, p); if (ret) diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index fec8e65b36e..dac5d0365fd 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -195,9 +195,13 @@ static void __init cell_init_early(void) } -static int __init cell_probe(int platform) +static int __init cell_probe(void) { - if (platform != PLATFORM_CELL) + /* XXX This is temporary, the Cell maintainer will come up with + * more appropriate detection logic + */ + unsigned long root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(root, "IBM,CPBW-1.0")) return 0; return 1; @@ -212,7 +216,8 @@ static int cell_check_legacy_ioport(unsigned int baseport) return -ENODEV; } -struct machdep_calls __initdata cell_md = { +define_machine(cell) { + .name = "Cell", .probe = cell_probe, .setup_arch = cell_setup_arch, .init_early = cell_init_early, diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index e74132188bd..55cbdd77a62 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -84,10 +84,11 @@ static void __iomem *spider_get_irq_config(int irq) static void spider_enable_irq(unsigned int irq) { + int nodeid = (irq / IIC_NODE_STRIDE) * 0x10; void __iomem *cfg = spider_get_irq_config(irq); irq = spider_get_nr(irq); - out_be32(cfg, in_be32(cfg) | 0x3107000eu); + out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid); out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); } @@ -131,61 +132,108 @@ static struct hw_interrupt_type spider_pic = { .end = spider_end_irq, }; - -int spider_get_irq(unsigned long int_pending) +int spider_get_irq(int node) { - void __iomem *regs = spider_get_pic(int_pending); unsigned long cs; - int irq; - - cs = in_be32(regs + TIR_CS); + void __iomem *regs = spider_pics[node]; - irq = cs >> 24; - if (irq != 63) - return irq; + cs = in_be32(regs + TIR_CS) >> 24; - return -1; + if (cs == 63) + return -1; + else + return cs; } - -void spider_init_IRQ(void) + +/* hardcoded part to be compatible with older firmware */ + +void spider_init_IRQ_hardcoded(void) { int node; - struct device_node *dn; - unsigned int *property; long spiderpic; + long pics[] = { 0x24000008000, 0x34000008000 }; int n; -/* FIXME: detect multiple PICs as soon as the device tree has them */ - for (node = 0; node < 1; node++) { - dn = of_find_node_by_path("/"); - n = prom_n_addr_cells(dn); - property = (unsigned int *) get_property(dn, - "platform-spider-pic", NULL); + pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__); - if (!property) - continue; - for (spiderpic = 0; n > 0; --n) - spiderpic = (spiderpic << 32) + *property++; + for (node = 0; node < num_present_cpus()/2; node++) { + spiderpic = pics[node]; printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic); - spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE); + spider_pics[node] = ioremap(spiderpic, 0x800); for (n = 0; n < IIC_NUM_EXT; n++) { int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; get_irq_desc(irq)->handler = &spider_pic; + } /* do not mask any interrupts because of level */ out_be32(spider_pics[node] + TIR_MSK, 0x0); - + /* disable edge detection clear */ /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ - + /* enable interrupt packets to be output */ out_be32(spider_pics[node] + TIR_PIEN, in_be32(spider_pics[node] + TIR_PIEN) | 0x1); - + /* Enable the interrupt detection enable bit. Do this last! */ out_be32(spider_pics[node] + TIR_DEN, - in_be32(spider_pics[node] +TIR_DEN) | 0x1); + in_be32(spider_pics[node] + TIR_DEN) | 0x1); + } +} + +void spider_init_IRQ(void) +{ + long spider_reg; + struct device_node *dn; + char *compatible; + int n, node = 0; + + for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { + compatible = (char *)get_property(dn, "compatible", NULL); + if (!compatible) + continue; + + if (strstr(compatible, "CBEA,platform-spider-pic")) + spider_reg = *(long *)get_property(dn,"reg", NULL); + else if (strstr(compatible, "sti,platform-spider-pic")) { + spider_init_IRQ_hardcoded(); + return; + } else + continue; + + if (!spider_reg) + printk("interrupt controller does not have reg property !\n"); + + n = prom_n_addr_cells(dn); + + if ( n != 2) + printk("reg property with invalid number of elements \n"); + + spider_pics[node] = ioremap(spider_reg, 0x800); + + printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n", + spider_reg, n, spider_pics[node]); + + for (n = 0; n < IIC_NUM_EXT; n++) { + int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; + get_irq_desc(irq)->handler = &spider_pic; } + + /* do not mask any interrupts because of level */ + out_be32(spider_pics[node] + TIR_MSK, 0x0); + + /* disable edge detection clear */ + /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ + + /* enable interrupt packets to be output */ + out_be32(spider_pics[node] + TIR_PIEN, + in_be32(spider_pics[node] + TIR_PIEN) | 0x1); + + /* Enable the interrupt detection enable bit. Do this last! */ + out_be32(spider_pics[node] + TIR_DEN, + in_be32(spider_pics[node] + TIR_DEN) | 0x1); + + node++; } } diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index d75ae03df68..269dda4fd0b 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -32,7 +32,7 @@ #include <asm/io.h> #include <asm/prom.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #include <asm/spu.h> #include <asm/mmu_context.h> @@ -111,7 +111,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) { - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea); /* Handle kernel space hash faults immediately. User hash faults need to be deferred to process context. */ @@ -168,7 +168,7 @@ static int __spu_trap_halt(struct spu *spu) static int __spu_trap_tag_group(struct spu *spu) { pr_debug("%s\n", __FUNCTION__); - /* wake_up(&spu->dma_wq); */ + spu->mfc_callback(spu); return 0; } @@ -242,6 +242,8 @@ spu_irq_class_1(int irq, void *data, struct pt_regs *regs) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); spin_unlock(&spu->register_lock); + pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, + dar, dsisr); if (stat & 1) /* segment fault */ __spu_trap_data_seg(spu, dar); @@ -342,7 +344,7 @@ spu_free_irqs(struct spu *spu) } static LIST_HEAD(spu_list); -static DECLARE_MUTEX(spu_mutex); +static DEFINE_MUTEX(spu_mutex); static void spu_init_channels(struct spu *spu) { @@ -382,7 +384,7 @@ struct spu *spu_alloc(void) { struct spu *spu; - down(&spu_mutex); + mutex_lock(&spu_mutex); if (!list_empty(&spu_list)) { spu = list_entry(spu_list.next, struct spu, list); list_del_init(&spu->list); @@ -391,7 +393,7 @@ struct spu *spu_alloc(void) pr_debug("No SPU left\n"); spu = NULL; } - up(&spu_mutex); + mutex_unlock(&spu_mutex); if (spu) spu_init_channels(spu); @@ -402,9 +404,9 @@ EXPORT_SYMBOL_GPL(spu_alloc); void spu_free(struct spu *spu) { - down(&spu_mutex); + mutex_lock(&spu_mutex); list_add_tail(&spu->list, &spu_list); - up(&spu_mutex); + mutex_unlock(&spu_mutex); } EXPORT_SYMBOL_GPL(spu_free); @@ -484,14 +486,13 @@ int spu_irq_class_1_bottom(struct spu *spu) ea = spu->dar; dsisr = spu->dsisr; - if (dsisr & MFC_DSISR_PTE_NOT_FOUND) { + if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) { access = (_PAGE_PRESENT | _PAGE_USER); access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL; if (hash_page(ea, access, 0x300) != 0) error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; } - if ((error & CLASS1_ENABLE_STORAGE_FAULT_INTR) || - (dsisr & MFC_DSISR_ACCESS_DENIED)) { + if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) { if ((ret = spu_handle_mm_fault(spu)) != 0) error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; else @@ -568,6 +569,11 @@ static int __init spu_map_device(struct spu *spu, struct device_node *spe) if (!spu->local_store) goto out; + prop = get_property(spe, "problem", NULL); + if (!prop) + goto out_unmap; + spu->problem_phys = *(unsigned long *)prop; + spu->problem= map_spe_prop(spe, "problem"); if (!spu->problem) goto out_unmap; @@ -632,15 +638,16 @@ static int __init create_spu(struct device_node *spe) spu->ibox_callback = NULL; spu->wbox_callback = NULL; spu->stop_callback = NULL; + spu->mfc_callback = NULL; - down(&spu_mutex); + mutex_lock(&spu_mutex); spu->number = number++; ret = spu_request_irqs(spu); if (ret) goto out_unmap; list_add(&spu->list, &spu_list); - up(&spu_mutex); + mutex_unlock(&spu_mutex); pr_debug(KERN_DEBUG "Using SPE %s %02x %p %p %p %p %d\n", spu->name, spu->isrc, spu->local_store, @@ -648,7 +655,7 @@ static int __init create_spu(struct device_node *spe) goto out; out_unmap: - up(&spu_mutex); + mutex_unlock(&spu_mutex); spu_unmap(spu); out_free: kfree(spu); @@ -668,10 +675,10 @@ static void destroy_spu(struct spu *spu) static void cleanup_spu_base(void) { struct spu *spu, *tmp; - down(&spu_mutex); + mutex_lock(&spu_mutex); list_for_each_entry_safe(spu, tmp, &spu_list, list) destroy_spu(spu); - up(&spu_mutex); + mutex_unlock(&spu_mutex); } module_exit(cleanup_spu_base); diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c new file mode 100644 index 00000000000..3a4245c926a --- /dev/null +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -0,0 +1,345 @@ +/* + * System call callback functions for SPUs + */ + +#define DEBUG + +#include <linux/kallsyms.h> +#include <linux/module.h> +#include <linux/syscalls.h> + +#include <asm/spu.h> +#include <asm/syscalls.h> +#include <asm/unistd.h> + +/* + * This table defines the system calls that an SPU can call. + * It is currently a subset of the 64 bit powerpc system calls, + * with the exact semantics. + * + * The reasons for disabling some of the system calls are: + * 1. They interact with the way SPU syscalls are handled + * and we can't let them execute ever: + * restart_syscall, exit, for, execve, ptrace, ... + * 2. They are deprecated and replaced by other means: + * uselib, pciconfig_*, sysfs, ... + * 3. They are somewhat interacting with the system in a way + * we don't want an SPU to: + * reboot, init_module, mount, kexec_load + * 4. They are optional and we can't rely on them being + * linked into the kernel. Unfortunately, the cond_syscall + * helper does not work here as it does not add the necessary + * opd symbols: + * mbind, mq_open, ipc, ... + */ + +void *spu_syscall_table[] = { + [__NR_restart_syscall] sys_ni_syscall, /* sys_restart_syscall */ + [__NR_exit] sys_ni_syscall, /* sys_exit */ + [__NR_fork] sys_ni_syscall, /* ppc_fork */ + [__NR_read] sys_read, + [__NR_write] sys_write, + [__NR_open] sys_open, + [__NR_close] sys_close, + [__NR_waitpid] sys_waitpid, + [__NR_creat] sys_creat, + [__NR_link] sys_link, + [__NR_unlink] sys_unlink, + [__NR_execve] sys_ni_syscall, /* sys_execve */ + [__NR_chdir] sys_chdir, + [__NR_time] sys_time, + [__NR_mknod] sys_mknod, + [__NR_chmod] sys_chmod, + [__NR_lchown] sys_lchown, + [__NR_break] sys_ni_syscall, + [__NR_oldstat] sys_ni_syscall, + [__NR_lseek] sys_lseek, + [__NR_getpid] sys_getpid, + [__NR_mount] sys_ni_syscall, /* sys_mount */ + [__NR_umount] sys_ni_syscall, + [__NR_setuid] sys_setuid, + [__NR_getuid] sys_getuid, + [__NR_stime] sys_stime, + [__NR_ptrace] sys_ni_syscall, /* sys_ptrace */ + [__NR_alarm] sys_alarm, + [__NR_oldfstat] sys_ni_syscall, + [__NR_pause] sys_ni_syscall, /* sys_pause */ + [__NR_utime] sys_ni_syscall, /* sys_utime */ + [__NR_stty] sys_ni_syscall, + [__NR_gtty] sys_ni_syscall, + [__NR_access] sys_access, + [__NR_nice] sys_nice, + [__NR_ftime] sys_ni_syscall, + [__NR_sync] sys_sync, + [__NR_kill] sys_kill, + [__NR_rename] sys_rename, + [__NR_mkdir] sys_mkdir, + [__NR_rmdir] sys_rmdir, + [__NR_dup] sys_dup, + [__NR_pipe] sys_pipe, + [__NR_times] sys_times, + [__NR_prof] sys_ni_syscall, + [__NR_brk] sys_brk, + [__NR_setgid] sys_setgid, + [__NR_getgid] sys_getgid, + [__NR_signal] sys_ni_syscall, /* sys_signal */ + [__NR_geteuid] sys_geteuid, + [__NR_getegid] sys_getegid, + [__NR_acct] sys_ni_syscall, /* sys_acct */ + [__NR_umount2] sys_ni_syscall, /* sys_umount */ + [__NR_lock] sys_ni_syscall, + [__NR_ioctl] sys_ioctl, + [__NR_fcntl] sys_fcntl, + [__NR_mpx] sys_ni_syscall, + [__NR_setpgid] sys_setpgid, + [__NR_ulimit] sys_ni_syscall, + [__NR_oldolduname] sys_ni_syscall, + [__NR_umask] sys_umask, + [__NR_chroot] sys_chroot, + [__NR_ustat] sys_ni_syscall, /* sys_ustat */ + [__NR_dup2] sys_dup2, + [__NR_getppid] sys_getppid, + [__NR_getpgrp] sys_getpgrp, + [__NR_setsid] sys_setsid, + [__NR_sigaction] sys_ni_syscall, + [__NR_sgetmask] sys_sgetmask, + [__NR_ssetmask] sys_ssetmask, + [__NR_setreuid] sys_setreuid, + [__NR_setregid] sys_setregid, + [__NR_sigsuspend] sys_ni_syscall, + [__NR_sigpending] sys_ni_syscall, + [__NR_sethostname] sys_sethostname, + [__NR_setrlimit] sys_setrlimit, + [__NR_getrlimit] sys_ni_syscall, + [__NR_getrusage] sys_getrusage, + [__NR_gettimeofday] sys_gettimeofday, + [__NR_settimeofday] sys_settimeofday, + [__NR_getgroups] sys_getgroups, + [__NR_setgroups] sys_setgroups, + [__NR_select] sys_ni_syscall, + [__NR_symlink] sys_symlink, + [__NR_oldlstat] sys_ni_syscall, + [__NR_readlink] sys_readlink, + [__NR_uselib] sys_ni_syscall, /* sys_uselib */ + [__NR_swapon] sys_ni_syscall, /* sys_swapon */ + [__NR_reboot] sys_ni_syscall, /* sys_reboot */ + [__NR_readdir] sys_ni_syscall, + [__NR_mmap] sys_mmap, + [__NR_munmap] sys_munmap, + [__NR_truncate] sys_truncate, + [__NR_ftruncate] sys_ftruncate, + [__NR_fchmod] sys_fchmod, + [__NR_fchown] sys_fchown, + [__NR_getpriority] sys_getpriority, + [__NR_setpriority] sys_setpriority, + [__NR_profil] sys_ni_syscall, + [__NR_statfs] sys_ni_syscall, /* sys_statfs */ + [__NR_fstatfs] sys_ni_syscall, /* sys_fstatfs */ + [__NR_ioperm] sys_ni_syscall, + [__NR_socketcall] sys_socketcall, + [__NR_syslog] sys_syslog, + [__NR_setitimer] sys_setitimer, + [__NR_getitimer] sys_getitimer, + [__NR_stat] sys_newstat, + [__NR_lstat] sys_newlstat, + [__NR_fstat] sys_newfstat, + [__NR_olduname] sys_ni_syscall, + [__NR_iopl] sys_ni_syscall, + [__NR_vhangup] sys_vhangup, + [__NR_idle] sys_ni_syscall, + [__NR_vm86] sys_ni_syscall, + [__NR_wait4] sys_wait4, + [__NR_swapoff] sys_ni_syscall, /* sys_swapoff */ + [__NR_sysinfo] sys_sysinfo, + [__NR_ipc] sys_ni_syscall, /* sys_ipc */ + [__NR_fsync] sys_fsync, + [__NR_sigreturn] sys_ni_syscall, + [__NR_clone] sys_ni_syscall, /* ppc_clone */ + [__NR_setdomainname] sys_setdomainname, + [__NR_uname] ppc_newuname, + [__NR_modify_ldt] sys_ni_syscall, + [__NR_adjtimex] sys_adjtimex, + [__NR_mprotect] sys_mprotect, + [__NR_sigprocmask] sys_ni_syscall, + [__NR_create_module] sys_ni_syscall, + [__NR_init_module] sys_ni_syscall, /* sys_init_module */ + [__NR_delete_module] sys_ni_syscall, /* sys_delete_module */ + [__NR_get_kernel_syms] sys_ni_syscall, + [__NR_quotactl] sys_ni_syscall, /* sys_quotactl */ + [__NR_getpgid] sys_getpgid, + [__NR_fchdir] sys_fchdir, + [__NR_bdflush] sys_bdflush, + [__NR_sysfs] sys_ni_syscall, /* sys_sysfs */ + [__NR_personality] ppc64_personality, + [__NR_afs_syscall] sys_ni_syscall, + [__NR_setfsuid] sys_setfsuid, + [__NR_setfsgid] sys_setfsgid, + [__NR__llseek] sys_llseek, + [__NR_getdents] sys_getdents, + [__NR__newselect] sys_select, + [__NR_flock] sys_flock, + [__NR_msync] sys_msync, + [__NR_readv] sys_readv, + [__NR_writev] sys_writev, + [__NR_getsid] sys_getsid, + [__NR_fdatasync] sys_fdatasync, + [__NR__sysctl] sys_ni_syscall, /* sys_sysctl */ + [__NR_mlock] sys_mlock, + [__NR_munlock] sys_munlock, + [__NR_mlockall] sys_mlockall, + [__NR_munlockall] sys_munlockall, + [__NR_sched_setparam] sys_sched_setparam, + [__NR_sched_getparam] sys_sched_getparam, + [__NR_sched_setscheduler] sys_sched_setscheduler, + [__NR_sched_getscheduler] sys_sched_getscheduler, + [__NR_sched_yield] sys_sched_yield, + [__NR_sched_get_priority_max] sys_sched_get_priority_max, + [__NR_sched_get_priority_min] sys_sched_get_priority_min, + [__NR_sched_rr_get_interval] sys_sched_rr_get_interval, + [__NR_nanosleep] sys_nanosleep, + [__NR_mremap] sys_mremap, + [__NR_setresuid] sys_setresuid, + [__NR_getresuid] sys_getresuid, + [__NR_query_module] sys_ni_syscall, + [__NR_poll] sys_poll, + [__NR_nfsservctl] sys_ni_syscall, /* sys_nfsservctl */ + [__NR_setresgid] sys_setresgid, + [__NR_getresgid] sys_getresgid, + [__NR_prctl] sys_prctl, + [__NR_rt_sigreturn] sys_ni_syscall, /* ppc64_rt_sigreturn */ + [__NR_rt_sigaction] sys_ni_syscall, /* sys_rt_sigaction */ + [__NR_rt_sigprocmask] sys_ni_syscall, /* sys_rt_sigprocmask */ + [__NR_rt_sigpending] sys_ni_syscall, /* sys_rt_sigpending */ + [__NR_rt_sigtimedwait] sys_ni_syscall, /* sys_rt_sigtimedwait */ + [__NR_rt_sigqueueinfo] sys_ni_syscall, /* sys_rt_sigqueueinfo */ + [__NR_rt_sigsuspend] sys_ni_syscall, /* sys_rt_sigsuspend */ + [__NR_pread64] sys_pread64, + [__NR_pwrite64] sys_pwrite64, + [__NR_chown] sys_chown, + [__NR_getcwd] sys_getcwd, + [__NR_capget] sys_capget, + [__NR_capset] sys_capset, + [__NR_sigaltstack] sys_ni_syscall, /* sys_sigaltstack */ + [__NR_sendfile] sys_sendfile64, + [__NR_getpmsg] sys_ni_syscall, + [__NR_putpmsg] sys_ni_syscall, + [__NR_vfork] sys_ni_syscall, /* ppc_vfork */ + [__NR_ugetrlimit] sys_getrlimit, + [__NR_readahead] sys_readahead, + [192] sys_ni_syscall, + [193] sys_ni_syscall, + [194] sys_ni_syscall, + [195] sys_ni_syscall, + [196] sys_ni_syscall, + [197] sys_ni_syscall, + [__NR_pciconfig_read] sys_ni_syscall, /* sys_pciconfig_read */ + [__NR_pciconfig_write] sys_ni_syscall, /* sys_pciconfig_write */ + [__NR_pciconfig_iobase] sys_ni_syscall, /* sys_pciconfig_iobase */ + [__NR_multiplexer] sys_ni_syscall, + [__NR_getdents64] sys_getdents64, + [__NR_pivot_root] sys_pivot_root, + [204] sys_ni_syscall, + [__NR_madvise] sys_madvise, + [__NR_mincore] sys_mincore, + [__NR_gettid] sys_gettid, + [__NR_tkill] sys_tkill, + [__NR_setxattr] sys_setxattr, + [__NR_lsetxattr] sys_lsetxattr, + [__NR_fsetxattr] sys_fsetxattr, + [__NR_getxattr] sys_getxattr, + [__NR_lgetxattr] sys_lgetxattr, + [__NR_fgetxattr] sys_fgetxattr, + [__NR_listxattr] sys_listxattr, + [__NR_llistxattr] sys_llistxattr, + [__NR_flistxattr] sys_flistxattr, + [__NR_removexattr] sys_removexattr, + [__NR_lremovexattr] sys_lremovexattr, + [__NR_fremovexattr] sys_fremovexattr, + [__NR_futex] sys_futex, + [__NR_sched_setaffinity] sys_sched_setaffinity, + [__NR_sched_getaffinity] sys_sched_getaffinity, + [__NR_tuxcall] sys_ni_syscall, + [226] sys_ni_syscall, + [__NR_io_setup] sys_io_setup, + [__NR_io_destroy] sys_io_destroy, + [__NR_io_getevents] sys_io_getevents, + [__NR_io_submit] sys_io_submit, + [__NR_io_cancel] sys_io_cancel, + [__NR_set_tid_address] sys_ni_syscall, /* sys_set_tid_address */ + [__NR_fadvise64] sys_fadvise64, + [__NR_exit_group] sys_ni_syscall, /* sys_exit_group */ + [__NR_lookup_dcookie] sys_ni_syscall, /* sys_lookup_dcookie */ + [__NR_epoll_create] sys_epoll_create, + [__NR_epoll_ctl] sys_epoll_ctl, + [__NR_epoll_wait] sys_epoll_wait, + [__NR_remap_file_pages] sys_remap_file_pages, + [__NR_timer_create] sys_timer_create, + [__NR_timer_settime] sys_timer_settime, + [__NR_timer_gettime] sys_timer_gettime, + [__NR_timer_getoverrun] sys_timer_getoverrun, + [__NR_timer_delete] sys_timer_delete, + [__NR_clock_settime] sys_clock_settime, + [__NR_clock_gettime] sys_clock_gettime, + [__NR_clock_getres] sys_clock_getres, + [__NR_clock_nanosleep] sys_clock_nanosleep, + [__NR_swapcontext] sys_ni_syscall, /* ppc64_swapcontext */ + [__NR_tgkill] sys_tgkill, + [__NR_utimes] sys_utimes, + [__NR_statfs64] sys_statfs64, + [__NR_fstatfs64] sys_fstatfs64, + [254] sys_ni_syscall, + [__NR_rtas] ppc_rtas, + [256] sys_ni_syscall, + [257] sys_ni_syscall, + [258] sys_ni_syscall, + [__NR_mbind] sys_ni_syscall, /* sys_mbind */ + [__NR_get_mempolicy] sys_ni_syscall, /* sys_get_mempolicy */ + [__NR_set_mempolicy] sys_ni_syscall, /* sys_set_mempolicy */ + [__NR_mq_open] sys_ni_syscall, /* sys_mq_open */ + [__NR_mq_unlink] sys_ni_syscall, /* sys_mq_unlink */ + [__NR_mq_timedsend] sys_ni_syscall, /* sys_mq_timedsend */ + [__NR_mq_timedreceive] sys_ni_syscall, /* sys_mq_timedreceive */ + [__NR_mq_notify] sys_ni_syscall, /* sys_mq_notify */ + [__NR_mq_getsetattr] sys_ni_syscall, /* sys_mq_getsetattr */ + [__NR_kexec_load] sys_ni_syscall, /* sys_kexec_load */ + [__NR_add_key] sys_ni_syscall, /* sys_add_key */ + [__NR_request_key] sys_ni_syscall, /* sys_request_key */ + [__NR_keyctl] sys_ni_syscall, /* sys_keyctl */ + [__NR_waitid] sys_ni_syscall, /* sys_waitid */ + [__NR_ioprio_set] sys_ni_syscall, /* sys_ioprio_set */ + [__NR_ioprio_get] sys_ni_syscall, /* sys_ioprio_get */ + [__NR_inotify_init] sys_ni_syscall, /* sys_inotify_init */ + [__NR_inotify_add_watch] sys_ni_syscall, /* sys_inotify_add_watch */ + [__NR_inotify_rm_watch] sys_ni_syscall, /* sys_inotify_rm_watch */ + [__NR_spu_run] sys_ni_syscall, /* sys_spu_run */ + [__NR_spu_create] sys_ni_syscall, /* sys_spu_create */ + [__NR_pselect6] sys_ni_syscall, /* sys_pselect */ + [__NR_ppoll] sys_ni_syscall, /* sys_ppoll */ + [__NR_unshare] sys_unshare, +}; + +long spu_sys_callback(struct spu_syscall_block *s) +{ + long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6); + + BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls); + + syscall = spu_syscall_table[s->nr_ret]; + + if (s->nr_ret >= __NR_syscalls) { + pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret); + return -ENOSYS; + } + +#ifdef DEBUG + print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall); + printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n", + s->nr_ret, + s->parm[0], s->parm[1], s->parm[2], + s->parm[3], s->parm[4], s->parm[5]); +#endif + + return syscall(s->parm[0], s->parm[1], s->parm[2], + s->parm[3], s->parm[4], s->parm[5]); +} +EXPORT_SYMBOL_GPL(spu_sys_callback); diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c index a5c489a53c6..f1d35ddc9df 100644 --- a/arch/powerpc/platforms/cell/spufs/backing_ops.c +++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c @@ -285,6 +285,49 @@ static void spu_backing_runcntl_stop(struct spu_context *ctx) spu_backing_runcntl_write(ctx, SPU_RUNCNTL_STOP); } +static int spu_backing_set_mfc_query(struct spu_context * ctx, u32 mask, + u32 mode) +{ + struct spu_problem_collapsed *prob = &ctx->csa.prob; + int ret; + + spin_lock(&ctx->csa.register_lock); + ret = -EAGAIN; + if (prob->dma_querytype_RW) + goto out; + ret = 0; + /* FIXME: what are the side-effects of this? */ + prob->dma_querymask_RW = mask; + prob->dma_querytype_RW = mode; +out: + spin_unlock(&ctx->csa.register_lock); + + return ret; +} + +static u32 spu_backing_read_mfc_tagstatus(struct spu_context * ctx) +{ + return ctx->csa.prob.dma_tagstatus_R; +} + +static u32 spu_backing_get_mfc_free_elements(struct spu_context *ctx) +{ + return ctx->csa.prob.dma_qstatus_R; +} + +static int spu_backing_send_mfc_command(struct spu_context *ctx, + struct mfc_dma_command *cmd) +{ + int ret; + + spin_lock(&ctx->csa.register_lock); + ret = -EAGAIN; + /* FIXME: set up priv2->puq */ + spin_unlock(&ctx->csa.register_lock); + + return ret; +} + struct spu_context_ops spu_backing_ops = { .mbox_read = spu_backing_mbox_read, .mbox_stat_read = spu_backing_mbox_stat_read, @@ -305,4 +348,8 @@ struct spu_context_ops spu_backing_ops = { .get_ls = spu_backing_get_ls, .runcntl_write = spu_backing_runcntl_write, .runcntl_stop = spu_backing_runcntl_stop, + .set_mfc_query = spu_backing_set_mfc_query, + .read_mfc_tagstatus = spu_backing_read_mfc_tagstatus, + .get_mfc_free_elements = spu_backing_get_mfc_free_elements, + .send_mfc_command = spu_backing_send_mfc_command, }; diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 336f238102f..8bb33abfad1 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -27,7 +27,7 @@ #include <asm/spu_csa.h> #include "spufs.h" -struct spu_context *alloc_spu_context(struct address_space *local_store) +struct spu_context *alloc_spu_context(void) { struct spu_context *ctx; ctx = kmalloc(sizeof *ctx, GFP_KERNEL); @@ -47,10 +47,17 @@ struct spu_context *alloc_spu_context(struct address_space *local_store) init_waitqueue_head(&ctx->ibox_wq); init_waitqueue_head(&ctx->wbox_wq); init_waitqueue_head(&ctx->stop_wq); + init_waitqueue_head(&ctx->mfc_wq); ctx->ibox_fasync = NULL; ctx->wbox_fasync = NULL; + ctx->mfc_fasync = NULL; + ctx->mfc = NULL; + ctx->tagwait = 0; ctx->state = SPU_STATE_SAVED; - ctx->local_store = local_store; + ctx->local_store = NULL; + ctx->cntl = NULL; + ctx->signal1 = NULL; + ctx->signal2 = NULL; ctx->spu = NULL; ctx->ops = &spu_backing_ops; ctx->owner = get_task_mm(current); @@ -68,8 +75,6 @@ void destroy_spu_context(struct kref *kref) ctx = container_of(kref, struct spu_context, kref); down_write(&ctx->state_sema); spu_deactivate(ctx); - ctx->ibox_fasync = NULL; - ctx->wbox_fasync = NULL; up_write(&ctx->state_sema); spu_fini_csa(&ctx->csa); kfree(ctx); @@ -109,7 +114,16 @@ void spu_release(struct spu_context *ctx) void spu_unmap_mappings(struct spu_context *ctx) { - unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); + if (ctx->local_store) + unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); + if (ctx->mfc) + unmap_mapping_range(ctx->mfc, 0, 0x4000, 1); + if (ctx->cntl) + unmap_mapping_range(ctx->cntl, 0, 0x4000, 1); + if (ctx->signal1) + unmap_mapping_range(ctx->signal1, 0, 0x4000, 1); + if (ctx->signal2) + unmap_mapping_range(ctx->signal2, 0, 0x4000, 1); } int spu_acquire_runnable(struct spu_context *ctx) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index dfa649c9b95..366185e9266 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -20,6 +20,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#undef DEBUG + #include <linux/fs.h> #include <linux/ioctl.h> #include <linux/module.h> @@ -39,8 +41,10 @@ static int spufs_mem_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); - file->private_data = i->i_ctx; - file->f_mapping = i->i_ctx->local_store; + struct spu_context *ctx = i->i_ctx; + file->private_data = ctx; + file->f_mapping = inode->i_mapping; + ctx->local_store = inode->i_mapping; return 0; } @@ -84,7 +88,7 @@ spufs_mem_write(struct file *file, const char __user *buffer, return ret; } -#ifdef CONFIG_SPARSEMEM +#ifdef CONFIG_SPUFS_MMAP static struct page * spufs_mem_mmap_nopage(struct vm_area_struct *vma, unsigned long address, int *type) @@ -136,11 +140,113 @@ static struct file_operations spufs_mem_fops = { .read = spufs_mem_read, .write = spufs_mem_write, .llseek = generic_file_llseek, -#ifdef CONFIG_SPARSEMEM +#ifdef CONFIG_SPUFS_MMAP .mmap = spufs_mem_mmap, #endif }; +#ifdef CONFIG_SPUFS_MMAP +static struct page *spufs_ps_nopage(struct vm_area_struct *vma, + unsigned long address, + int *type, unsigned long ps_offs) +{ + struct page *page = NOPAGE_SIGBUS; + int fault_type = VM_FAULT_SIGBUS; + struct spu_context *ctx = vma->vm_file->private_data; + unsigned long offset = address - vma->vm_start; + unsigned long area; + int ret; + + offset += vma->vm_pgoff << PAGE_SHIFT; + if (offset >= 0x4000) + goto out; + + ret = spu_acquire_runnable(ctx); + if (ret) + goto out; + + area = ctx->spu->problem_phys + ps_offs; + page = pfn_to_page((area + offset) >> PAGE_SHIFT); + fault_type = VM_FAULT_MINOR; + page_cache_get(page); + + spu_release(ctx); + + out: + if (type) + *type = fault_type; + + return page; +} + +static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + return spufs_ps_nopage(vma, address, type, 0x4000); +} + +static struct vm_operations_struct spufs_cntl_mmap_vmops = { + .nopage = spufs_cntl_mmap_nopage, +}; + +/* + * mmap support for problem state control area [0x4000 - 0x4fff]. + * Mapping this area requires that the application have CAP_SYS_RAWIO, + * as these registers require special care when read/writing. + */ +static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + vma->vm_flags |= VM_RESERVED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_cntl_mmap_vmops; + return 0; +} +#endif + +static int spufs_cntl_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + file->private_data = ctx; + file->f_mapping = inode->i_mapping; + ctx->cntl = inode->i_mapping; + return 0; +} + +static ssize_t +spufs_cntl_read(struct file *file, char __user *buffer, + size_t size, loff_t *pos) +{ + /* FIXME: read from spu status */ + return -EINVAL; +} + +static ssize_t +spufs_cntl_write(struct file *file, const char __user *buffer, + size_t size, loff_t *pos) +{ + /* FIXME: write to runctl bit */ + return -EINVAL; +} + +static struct file_operations spufs_cntl_fops = { + .open = spufs_cntl_open, + .read = spufs_cntl_read, + .write = spufs_cntl_write, +#ifdef CONFIG_SPUFS_MMAP + .mmap = spufs_cntl_mmap, +#endif +}; + static int spufs_regs_open(struct inode *inode, struct file *file) { @@ -501,6 +607,16 @@ static struct file_operations spufs_wbox_stat_fops = { .read = spufs_wbox_stat_read, }; +static int spufs_signal1_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + file->private_data = ctx; + file->f_mapping = inode->i_mapping; + ctx->signal1 = inode->i_mapping; + return nonseekable_open(inode, file); +} + static ssize_t spufs_signal1_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { @@ -541,12 +657,50 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, return 4; } +#ifdef CONFIG_SPUFS_MMAP +static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + return spufs_ps_nopage(vma, address, type, 0x14000); +} + +static struct vm_operations_struct spufs_signal1_mmap_vmops = { + .nopage = spufs_signal1_mmap_nopage, +}; + +static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + vma->vm_flags |= VM_RESERVED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_signal1_mmap_vmops; + return 0; +} +#endif + static struct file_operations spufs_signal1_fops = { - .open = spufs_pipe_open, + .open = spufs_signal1_open, .read = spufs_signal1_read, .write = spufs_signal1_write, +#ifdef CONFIG_SPUFS_MMAP + .mmap = spufs_signal1_mmap, +#endif }; +static int spufs_signal2_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + file->private_data = ctx; + file->f_mapping = inode->i_mapping; + ctx->signal2 = inode->i_mapping; + return nonseekable_open(inode, file); +} + static ssize_t spufs_signal2_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { @@ -589,10 +743,39 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, return 4; } +#ifdef CONFIG_SPUFS_MMAP +static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + return spufs_ps_nopage(vma, address, type, 0x1c000); +} + +static struct vm_operations_struct spufs_signal2_mmap_vmops = { + .nopage = spufs_signal2_mmap_nopage, +}; + +static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + /* FIXME: */ + vma->vm_flags |= VM_RESERVED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_signal2_mmap_vmops; + return 0; +} +#endif + static struct file_operations spufs_signal2_fops = { - .open = spufs_pipe_open, + .open = spufs_signal2_open, .read = spufs_signal2_read, .write = spufs_signal2_write, +#ifdef CONFIG_SPUFS_MMAP + .mmap = spufs_signal2_mmap, +#endif }; static void spufs_signal1_type_set(void *data, u64 val) @@ -641,6 +824,332 @@ static u64 spufs_signal2_type_get(void *data) DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, spufs_signal2_type_set, "%llu"); +#ifdef CONFIG_SPUFS_MMAP +static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + return spufs_ps_nopage(vma, address, type, 0x3000); +} + +static struct vm_operations_struct spufs_mfc_mmap_vmops = { + .nopage = spufs_mfc_mmap_nopage, +}; + +/* + * mmap support for problem state MFC DMA area [0x0000 - 0x0fff]. + * Mapping this area requires that the application have CAP_SYS_RAWIO, + * as these registers require special care when read/writing. + */ +static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + vma->vm_flags |= VM_RESERVED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_mfc_mmap_vmops; + return 0; +} +#endif + +static int spufs_mfc_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + /* we don't want to deal with DMA into other processes */ + if (ctx->owner != current->mm) + return -EINVAL; + + if (atomic_read(&inode->i_count) != 1) + return -EBUSY; + + file->private_data = ctx; + return nonseekable_open(inode, file); +} + +/* interrupt-level mfc callback function. */ +void spufs_mfc_callback(struct spu *spu) +{ + struct spu_context *ctx = spu->ctx; + + wake_up_all(&ctx->mfc_wq); + + pr_debug("%s %s\n", __FUNCTION__, spu->name); + if (ctx->mfc_fasync) { + u32 free_elements, tagstatus; + unsigned int mask; + + /* no need for spu_acquire in interrupt context */ + free_elements = ctx->ops->get_mfc_free_elements(ctx); + tagstatus = ctx->ops->read_mfc_tagstatus(ctx); + + mask = 0; + if (free_elements & 0xffff) + mask |= POLLOUT; + if (tagstatus & ctx->tagwait) + mask |= POLLIN; + + kill_fasync(&ctx->mfc_fasync, SIGIO, mask); + } +} + +static int spufs_read_mfc_tagstatus(struct spu_context *ctx, u32 *status) +{ + /* See if there is one tag group is complete */ + /* FIXME we need locking around tagwait */ + *status = ctx->ops->read_mfc_tagstatus(ctx) & ctx->tagwait; + ctx->tagwait &= ~*status; + if (*status) + return 1; + + /* enable interrupt waiting for any tag group, + may silently fail if interrupts are already enabled */ + ctx->ops->set_mfc_query(ctx, ctx->tagwait, 1); + return 0; +} + +static ssize_t spufs_mfc_read(struct file *file, char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + int ret = -EINVAL; + u32 status; + + if (size != 4) + goto out; + + spu_acquire(ctx); + if (file->f_flags & O_NONBLOCK) { + status = ctx->ops->read_mfc_tagstatus(ctx); + if (!(status & ctx->tagwait)) + ret = -EAGAIN; + else + ctx->tagwait &= ~status; + } else { + ret = spufs_wait(ctx->mfc_wq, + spufs_read_mfc_tagstatus(ctx, &status)); + } + spu_release(ctx); + + if (ret) + goto out; + + ret = 4; + if (copy_to_user(buffer, &status, 4)) + ret = -EFAULT; + +out: + return ret; +} + +static int spufs_check_valid_dma(struct mfc_dma_command *cmd) +{ + pr_debug("queueing DMA %x %lx %x %x %x\n", cmd->lsa, + cmd->ea, cmd->size, cmd->tag, cmd->cmd); + + switch (cmd->cmd) { + case MFC_PUT_CMD: + case MFC_PUTF_CMD: + case MFC_PUTB_CMD: + case MFC_GET_CMD: + case MFC_GETF_CMD: + case MFC_GETB_CMD: + break; + default: + pr_debug("invalid DMA opcode %x\n", cmd->cmd); + return -EIO; + } + + if ((cmd->lsa & 0xf) != (cmd->ea &0xf)) { + pr_debug("invalid DMA alignment, ea %lx lsa %x\n", + cmd->ea, cmd->lsa); + return -EIO; + } + + switch (cmd->size & 0xf) { + case 1: + break; + case 2: + if (cmd->lsa & 1) + goto error; + break; + case 4: + if (cmd->lsa & 3) + goto error; + break; + case 8: + if (cmd->lsa & 7) + goto error; + break; + case 0: + if (cmd->lsa & 15) + goto error; + break; + error: + default: + pr_debug("invalid DMA alignment %x for size %x\n", + cmd->lsa & 0xf, cmd->size); + return -EIO; + } + + if (cmd->size > 16 * 1024) { + pr_debug("invalid DMA size %x\n", cmd->size); + return -EIO; + } + + if (cmd->tag & 0xfff0) { + /* we reserve the higher tag numbers for kernel use */ + pr_debug("invalid DMA tag\n"); + return -EIO; + } + + if (cmd->class) { + /* not supported in this version */ + pr_debug("invalid DMA class\n"); + return -EIO; + } + + return 0; +} + +static int spu_send_mfc_command(struct spu_context *ctx, + struct mfc_dma_command cmd, + int *error) +{ + *error = ctx->ops->send_mfc_command(ctx, &cmd); + if (*error == -EAGAIN) { + /* wait for any tag group to complete + so we have space for the new command */ + ctx->ops->set_mfc_query(ctx, ctx->tagwait, 1); + /* try again, because the queue might be + empty again */ + *error = ctx->ops->send_mfc_command(ctx, &cmd); + if (*error == -EAGAIN) + return 0; + } + return 1; +} + +static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + struct mfc_dma_command cmd; + int ret = -EINVAL; + + if (size != sizeof cmd) + goto out; + + ret = -EFAULT; + if (copy_from_user(&cmd, buffer, sizeof cmd)) + goto out; + + ret = spufs_check_valid_dma(&cmd); + if (ret) + goto out; + + spu_acquire_runnable(ctx); + if (file->f_flags & O_NONBLOCK) { + ret = ctx->ops->send_mfc_command(ctx, &cmd); + } else { + int status; + ret = spufs_wait(ctx->mfc_wq, + spu_send_mfc_command(ctx, cmd, &status)); + if (status) + ret = status; + } + spu_release(ctx); + + if (ret) + goto out; + + ctx->tagwait |= 1 << cmd.tag; + +out: + return ret; +} + +static unsigned int spufs_mfc_poll(struct file *file,poll_table *wait) +{ + struct spu_context *ctx = file->private_data; + u32 free_elements, tagstatus; + unsigned int mask; + + spu_acquire(ctx); + ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2); + free_elements = ctx->ops->get_mfc_free_elements(ctx); + tagstatus = ctx->ops->read_mfc_tagstatus(ctx); + spu_release(ctx); + + poll_wait(file, &ctx->mfc_wq, wait); + + mask = 0; + if (free_elements & 0xffff) + mask |= POLLOUT | POLLWRNORM; + if (tagstatus & ctx->tagwait) + mask |= POLLIN | POLLRDNORM; + + pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__, + free_elements, tagstatus, ctx->tagwait); + + return mask; +} + +static int spufs_mfc_flush(struct file *file) +{ + struct spu_context *ctx = file->private_data; + int ret; + + spu_acquire(ctx); +#if 0 +/* this currently hangs */ + ret = spufs_wait(ctx->mfc_wq, + ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2)); + if (ret) + goto out; + ret = spufs_wait(ctx->mfc_wq, + ctx->ops->read_mfc_tagstatus(ctx) == ctx->tagwait); +out: +#else + ret = 0; +#endif + spu_release(ctx); + + return ret; +} + +static int spufs_mfc_fsync(struct file *file, struct dentry *dentry, + int datasync) +{ + return spufs_mfc_flush(file); +} + +static int spufs_mfc_fasync(int fd, struct file *file, int on) +{ + struct spu_context *ctx = file->private_data; + + return fasync_helper(fd, file, on, &ctx->mfc_fasync); +} + +static struct file_operations spufs_mfc_fops = { + .open = spufs_mfc_open, + .read = spufs_mfc_read, + .write = spufs_mfc_write, + .poll = spufs_mfc_poll, + .flush = spufs_mfc_flush, + .fsync = spufs_mfc_fsync, + .fasync = spufs_mfc_fasync, +#ifdef CONFIG_SPUFS_MMAP + .mmap = spufs_mfc_mmap, +#endif +}; + static void spufs_npc_set(void *data, u64 val) { struct spu_context *ctx = data; @@ -783,6 +1292,8 @@ struct tree_descr spufs_dir_contents[] = { { "signal2", &spufs_signal2_fops, 0666, }, { "signal1_type", &spufs_signal1_type, 0666, }, { "signal2_type", &spufs_signal2_type, 0666, }, + { "mfc", &spufs_mfc_fops, 0666, }, + { "cntl", &spufs_cntl_fops, 0666, }, { "npc", &spufs_npc_ops, 0666, }, { "fpcr", &spufs_fpcr_fops, 0666, }, { "decr", &spufs_decr_ops, 0666, }, diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index 5445719bff7..a13a8b5a014 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -232,6 +232,59 @@ static void spu_hw_runcntl_stop(struct spu_context *ctx) spin_unlock_irq(&ctx->spu->register_lock); } +static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode) +{ + struct spu_problem *prob = ctx->spu->problem; + int ret; + + spin_lock_irq(&ctx->spu->register_lock); + ret = -EAGAIN; + if (in_be32(&prob->dma_querytype_RW)) + goto out; + ret = 0; + out_be32(&prob->dma_querymask_RW, mask); + out_be32(&prob->dma_querytype_RW, mode); +out: + spin_unlock_irq(&ctx->spu->register_lock); + return ret; +} + +static u32 spu_hw_read_mfc_tagstatus(struct spu_context * ctx) +{ + return in_be32(&ctx->spu->problem->dma_tagstatus_R); +} + +static u32 spu_hw_get_mfc_free_elements(struct spu_context *ctx) +{ + return in_be32(&ctx->spu->problem->dma_qstatus_R); +} + +static int spu_hw_send_mfc_command(struct spu_context *ctx, + struct mfc_dma_command *cmd) +{ + u32 status; + struct spu_problem *prob = ctx->spu->problem; + + spin_lock_irq(&ctx->spu->register_lock); + out_be32(&prob->mfc_lsa_W, cmd->lsa); + out_be64(&prob->mfc_ea_W, cmd->ea); + out_be32(&prob->mfc_union_W.by32.mfc_size_tag32, + cmd->size << 16 | cmd->tag); + out_be32(&prob->mfc_union_W.by32.mfc_class_cmd32, + cmd->class << 16 | cmd->cmd); + status = in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32); + spin_unlock_irq(&ctx->spu->register_lock); + + switch (status & 0xffff) { + case 0: + return 0; + case 2: + return -EAGAIN; + default: + return -EINVAL; + } +} + struct spu_context_ops spu_hw_ops = { .mbox_read = spu_hw_mbox_read, .mbox_stat_read = spu_hw_mbox_stat_read, @@ -252,4 +305,8 @@ struct spu_context_ops spu_hw_ops = { .get_ls = spu_hw_get_ls, .runcntl_write = spu_hw_runcntl_write, .runcntl_stop = spu_hw_runcntl_stop, + .set_mfc_query = spu_hw_set_mfc_query, + .read_mfc_tagstatus = spu_hw_read_mfc_tagstatus, + .get_mfc_free_elements = spu_hw_get_mfc_free_elements, + .send_mfc_command = spu_hw_send_mfc_command, }; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index b3962c3a034..d9554199afa 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -103,7 +103,7 @@ spufs_setattr(struct dentry *dentry, struct iattr *attr) static int spufs_new_file(struct super_block *sb, struct dentry *dentry, - struct file_operations *fops, int mode, + const struct file_operations *fops, int mode, struct spu_context *ctx) { static struct inode_operations spufs_file_iops = { @@ -241,7 +241,7 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, int mode) inode->i_gid = dir->i_gid; inode->i_mode &= S_ISGID; } - ctx = alloc_spu_context(inode->i_mapping); + ctx = alloc_spu_context(); SPUFS_I(inode)->i_ctx = ctx; if (!ctx) goto out_iput; @@ -442,7 +442,7 @@ static struct file_system_type spufs_type = { .kill_sb = kill_litter_super, }; -static int spufs_init(void) +static int __init spufs_init(void) { int ret; ret = -ENOMEM; @@ -472,7 +472,7 @@ out: } module_init(spufs_init); -static void spufs_exit(void) +static void __exit spufs_exit(void) { spu_sched_exit(); unregister_spu_syscalls(&spufs_calls); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 18ea8866c61..c04e078c0fe 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -76,6 +76,90 @@ static inline int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc, return 0; } +/* + * SPU syscall restarting is tricky because we violate the basic + * assumption that the signal handler is running on the interrupted + * thread. Here instead, the handler runs on PowerPC user space code, + * while the syscall was called from the SPU. + * This means we can only do a very rough approximation of POSIX + * signal semantics. + */ +int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret, + unsigned int *npc) +{ + int ret; + + switch (*spu_ret) { + case -ERESTARTSYS: + case -ERESTARTNOINTR: + /* + * Enter the regular syscall restarting for + * sys_spu_run, then restart the SPU syscall + * callback. + */ + *npc -= 8; + ret = -ERESTARTSYS; + break; + case -ERESTARTNOHAND: + case -ERESTART_RESTARTBLOCK: + /* + * Restart block is too hard for now, just return -EINTR + * to the SPU. + * ERESTARTNOHAND comes from sys_pause, we also return + * -EINTR from there. + * Assume that we need to be restarted ourselves though. + */ + *spu_ret = -EINTR; + ret = -ERESTARTSYS; + break; + default: + printk(KERN_WARNING "%s: unexpected return code %ld\n", + __FUNCTION__, *spu_ret); + ret = 0; + } + return ret; +} + +int spu_process_callback(struct spu_context *ctx) +{ + struct spu_syscall_block s; + u32 ls_pointer, npc; + char *ls; + long spu_ret; + int ret; + + /* get syscall block from local store */ + npc = ctx->ops->npc_read(ctx); + ls = ctx->ops->get_ls(ctx); + ls_pointer = *(u32*)(ls + npc); + if (ls_pointer > (LS_SIZE - sizeof(s))) + return -EFAULT; + memcpy(&s, ls + ls_pointer, sizeof (s)); + + /* do actual syscall without pinning the spu */ + ret = 0; + spu_ret = -ENOSYS; + npc += 4; + + if (s.nr_ret < __NR_syscalls) { + spu_release(ctx); + /* do actual system call from here */ + spu_ret = spu_sys_callback(&s); + if (spu_ret <= -ERESTARTSYS) { + ret = spu_handle_restartsys(ctx, &spu_ret, &npc); + } + spu_acquire(ctx); + if (ret == -ERESTARTSYS) + return ret; + } + + /* write result, jump over indirect pointer */ + memcpy(ls + ls_pointer, &spu_ret, sizeof (spu_ret)); + ctx->ops->npc_write(ctx, npc); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); + return ret; +} + static inline int spu_process_events(struct spu_context *ctx) { struct spu *spu = ctx->spu; @@ -107,6 +191,13 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, status)); if (unlikely(ret)) break; + if ((*status & SPU_STATUS_STOPPED_BY_STOP) && + (*status >> SPU_STOP_STATUS_SHIFT == 0x2104)) { + ret = spu_process_callback(ctx); + if (ret) + break; + *status &= ~SPU_STATUS_STOPPED_BY_STOP; + } if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, status); if (ret) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 963182fbd1a..bf652cd7700 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -180,6 +180,7 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->ibox_callback = spufs_ibox_callback; spu->wbox_callback = spufs_wbox_callback; spu->stop_callback = spufs_stop_callback; + spu->mfc_callback = spufs_mfc_callback; mb(); spu_unmap_mappings(ctx); spu_restore(&ctx->csa, spu); @@ -197,6 +198,7 @@ static inline void unbind_context(struct spu *spu, struct spu_context *ctx) spu->ibox_callback = NULL; spu->wbox_callback = NULL; spu->stop_callback = NULL; + spu->mfc_callback = NULL; spu->mm = NULL; spu->pid = 0; spu->prio = MAX_PRIO; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index db2601f0abd..4485738e210 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -43,7 +43,11 @@ struct spu_context { struct spu *spu; /* pointer to a physical SPU */ struct spu_state csa; /* SPU context save area. */ spinlock_t mmio_lock; /* protects mmio access */ - struct address_space *local_store;/* local store backing store */ + struct address_space *local_store; /* local store mapping. */ + struct address_space *mfc; /* 'mfc' area mappings. */ + struct address_space *cntl; /* 'control' area mappings. */ + struct address_space *signal1; /* 'signal1' area mappings. */ + struct address_space *signal2; /* 'signal2' area mappings. */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; struct rw_semaphore state_sema; @@ -55,13 +59,27 @@ struct spu_context { wait_queue_head_t ibox_wq; wait_queue_head_t wbox_wq; wait_queue_head_t stop_wq; + wait_queue_head_t mfc_wq; struct fasync_struct *ibox_fasync; struct fasync_struct *wbox_fasync; + struct fasync_struct *mfc_fasync; + u32 tagwait; struct spu_context_ops *ops; struct work_struct reap_work; u64 flags; }; +struct mfc_dma_command { + int32_t pad; /* reserved */ + uint32_t lsa; /* local storage address */ + uint64_t ea; /* effective address */ + uint16_t size; /* transfer size */ + uint16_t tag; /* command tag */ + uint16_t class; /* class ID */ + uint16_t cmd; /* command opcode */ +}; + + /* SPU context query/set operations. */ struct spu_context_ops { int (*mbox_read) (struct spu_context * ctx, u32 * data); @@ -84,6 +102,11 @@ struct spu_context_ops { char*(*get_ls) (struct spu_context * ctx); void (*runcntl_write) (struct spu_context * ctx, u32 data); void (*runcntl_stop) (struct spu_context * ctx); + int (*set_mfc_query)(struct spu_context * ctx, u32 mask, u32 mode); + u32 (*read_mfc_tagstatus)(struct spu_context * ctx); + u32 (*get_mfc_free_elements)(struct spu_context *ctx); + int (*send_mfc_command)(struct spu_context *ctx, + struct mfc_dma_command *cmd); }; extern struct spu_context_ops spu_hw_ops; @@ -106,7 +129,7 @@ long spufs_create_thread(struct nameidata *nd, extern struct file_operations spufs_context_fops; /* context management */ -struct spu_context * alloc_spu_context(struct address_space *local_store); +struct spu_context * alloc_spu_context(void); void destroy_spu_context(struct kref *kref); struct spu_context * get_spu_context(struct spu_context *ctx); int put_spu_context(struct spu_context *ctx); @@ -159,5 +182,6 @@ size_t spu_ibox_read(struct spu_context *ctx, u32 *data); void spufs_ibox_callback(struct spu *spu); void spufs_wbox_callback(struct spu *spu); void spufs_stop_callback(struct spu *spu); +void spufs_mfc_callback(struct spu *spu); #endif diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 212db28531f..97898d5d34e 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -2145,7 +2145,8 @@ static void init_priv1(struct spu_state *csa) csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR | CLASS1_ENABLE_STORAGE_FAULT_INTR; csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR | - CLASS2_ENABLE_SPU_HALT_INTR; + CLASS2_ENABLE_SPU_HALT_INTR | + CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR; } static void init_priv2(struct spu_state *csa) diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h index 814f54742e0..63f0aee4c15 100644 --- a/arch/powerpc/platforms/chrp/chrp.h +++ b/arch/powerpc/platforms/chrp/chrp.h @@ -8,4 +8,4 @@ extern int chrp_set_rtc_time(struct rtc_time *); extern long chrp_time_init(void); extern void chrp_find_bridges(void); -extern void chrp_event_scan(void); +extern void chrp_event_scan(unsigned long); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 8bf4307e323..23a20171870 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -35,6 +35,7 @@ #include <linux/root_dev.h> #include <linux/initrd.h> #include <linux/module.h> +#include <linux/timer.h> #include <asm/io.h> #include <asm/pgtable.h> @@ -61,6 +62,10 @@ EXPORT_SYMBOL(_chrp_type); struct mpic *chrp_mpic; +/* Used for doing CHRP event-scans */ +DEFINE_PER_CPU(struct timer_list, heartbeat_timer); +unsigned long event_scan_interval; + /* * XXX this should be in xmon.h, but putting it there means xmon.h * has to include <linux/interrupt.h> (to get irqreturn_t), which @@ -229,8 +234,6 @@ void __init chrp_setup_arch(void) { struct device_node *root = find_path_device ("/"); char *machine = NULL; - struct device_node *device; - unsigned int *p = NULL; /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000/HZ; @@ -287,23 +290,12 @@ void __init chrp_setup_arch(void) */ sio_init(); - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - device = find_devices("rtas"); - if (device) - p = (unsigned int *) get_property - (device, "rtas-event-scan-rate", NULL); - if (p && *p) { - ppc_md.heartbeat = chrp_event_scan; - ppc_md.heartbeat_reset = HZ / (*p * 30) - 1; - ppc_md.heartbeat_count = 1; - printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", - *p, ppc_md.heartbeat_reset); - } - pci_create_OF_bus_map(); +#ifdef CONFIG_SMP + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ + /* * Print the banner, then scroll down so boot progress * can be printed. -- Cort @@ -312,7 +304,7 @@ void __init chrp_setup_arch(void) } void -chrp_event_scan(void) +chrp_event_scan(unsigned long unused) { unsigned char log[1024]; int ret = 0; @@ -320,7 +312,8 @@ chrp_event_scan(void) /* XXX: we should loop until the hardware says no more error logs -- Cort */ rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, __pa(log), 1024); - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; + mod_timer(&__get_cpu_var(heartbeat_timer), + jiffies + event_scan_interval); } /* @@ -465,6 +458,9 @@ void __init chrp_init_IRQ(void) void __init chrp_init2(void) { + struct device_node *device; + unsigned int *p = NULL; + #ifdef CONFIG_NVRAM chrp_nvram_init(); #endif @@ -476,12 +472,53 @@ chrp_init2(void) request_region(0x80,0x10,"dma page reg"); request_region(0xc0,0x20,"dma2"); + /* Get the event scan rate for the rtas so we know how + * often it expects a heartbeat. -- Cort + */ + device = find_devices("rtas"); + if (device) + p = (unsigned int *) get_property + (device, "rtas-event-scan-rate", NULL); + if (p && *p) { + /* + * Arrange to call chrp_event_scan at least *p times + * per minute. We use 59 rather than 60 here so that + * the rate will be slightly higher than the minimum. + * This all assumes we don't do hotplug CPU on any + * machine that needs the event scans done. + */ + unsigned long interval, offset; + int cpu, ncpus; + struct timer_list *timer; + + interval = HZ * 59 / *p; + offset = HZ; + ncpus = num_online_cpus(); + event_scan_interval = ncpus * interval; + for (cpu = 0; cpu < ncpus; ++cpu) { + timer = &per_cpu(heartbeat_timer, cpu); + setup_timer(timer, chrp_event_scan, 0); + timer->expires = jiffies + offset; + add_timer_on(timer, cpu); + offset += interval; + } + printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", + *p, interval); + } + if (ppc_md.progress) ppc_md.progress(" Have fun! ", 0x7777); } -void __init chrp_init(void) +static int __init chrp_probe(void) { + char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), + "device_type", NULL); + if (dtype == NULL) + return 0; + if (strcmp(dtype, "chrp")) + return 0; + ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 12c6f689b1a..7d788902693 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -120,33 +120,15 @@ int chrp_set_rtc_time(struct rtc_time *tmarg) void chrp_get_rtc_time(struct rtc_time *tm) { unsigned int year, mon, day, hour, min, sec; - int uip, i; - /* The Linux interpretation of the CMOS clock register contents: - * When the Update-In-Progress (UIP) flag goes from 1 to 0, the - * RTC registers show the second which has precisely just started. - * Let's hope other operating systems interpret the RTC the same way. - */ - - /* Since the UIP flag is set for about 2.2 ms and the clock - * is typically written with a precision of 1 jiffy, trying - * to obtain a precision better than a few milliseconds is - * an illusion. Only consistency is interesting, this also - * allows to use the routine for /dev/rtc without a potential - * 1 second kernel busy loop triggered by any reader of /dev/rtc. - */ - - for ( i = 0; i<1000000; i++) { - uip = chrp_cmos_clock_read(RTC_FREQ_SELECT); + do { sec = chrp_cmos_clock_read(RTC_SECONDS); min = chrp_cmos_clock_read(RTC_MINUTES); hour = chrp_cmos_clock_read(RTC_HOURS); day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH); mon = chrp_cmos_clock_read(RTC_MONTH); year = chrp_cmos_clock_read(RTC_YEAR); - uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT); - if ((uip & RTC_UIP)==0) break; - } + } while (sec != chrp_cmos_clock_read(RTC_SECONDS)); if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BCD_TO_BIN(sec); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index fa4550611c1..6ce8a404ba6 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -675,18 +675,20 @@ static void iseries_dedicated_idle(void) void __init iSeries_init_IRQ(void) { } #endif -static int __init iseries_probe(int platform) +static int __init iseries_probe(void) { - if (PLATFORM_ISERIES_LPAR != platform) + unsigned long root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(root, "IBM,iSeries")) return 0; - ppc64_firmware_features |= FW_FEATURE_ISERIES; - ppc64_firmware_features |= FW_FEATURE_LPAR; + powerpc_firmware_features |= FW_FEATURE_ISERIES; + powerpc_firmware_features |= FW_FEATURE_LPAR; return 1; } -struct machdep_calls __initdata iseries_md = { +define_machine(iseries) { + .name = "iSeries", .setup_arch = iSeries_setup_arch, .show_cpuinfo = iSeries_show_cpuinfo, .init_IRQ = iSeries_init_IRQ, @@ -930,7 +932,6 @@ void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) /* /chosen */ dt_start_node(dt, "chosen"); - dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR); dt_prop_str(dt, "bootargs", cmd_line); if (cmd_mem_limit) dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit); diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index ec5c1e10c40..24c0aef4ea3 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -259,9 +259,10 @@ static void __init maple_progress(char *s, unsigned short hex) /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init maple_probe(int platform) +static int __init maple_probe(void) { - if (platform != PLATFORM_MAPLE) + unsigned long root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(root, "Momentum,Maple")) return 0; /* * On U3, the DART (iommu) must be allocated now since it @@ -274,7 +275,8 @@ static int __init maple_probe(int platform) return 1; } -struct machdep_calls __initdata maple_md = { +define_machine(maple_md) { + .name = "Maple", .probe = maple_probe, .setup_arch = maple_setup_arch, .init_early = maple_init_early, @@ -290,7 +292,7 @@ struct machdep_calls __initdata maple_md = { .get_rtc_time = maple_get_rtc_time, .calibrate_decr = generic_calibrate_decr, .progress = maple_progress, - .idle_loop = native_idle, + .power_save = power4_idle, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 5e6981d1737..b9a2b3d4bf3 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -60,34 +60,14 @@ static void maple_clock_write(unsigned long val, int addr) void maple_get_rtc_time(struct rtc_time *tm) { - int uip, i; - - /* The Linux interpretation of the CMOS clock register contents: - * When the Update-In-Progress (UIP) flag goes from 1 to 0, the - * RTC registers show the second which has precisely just started. - * Let's hope other operating systems interpret the RTC the same way. - */ - - /* Since the UIP flag is set for about 2.2 ms and the clock - * is typically written with a precision of 1 jiffy, trying - * to obtain a precision better than a few milliseconds is - * an illusion. Only consistency is interesting, this also - * allows to use the routine for /dev/rtc without a potential - * 1 second kernel busy loop triggered by any reader of /dev/rtc. - */ - - for (i = 0; i<1000000; i++) { - uip = maple_clock_read(RTC_FREQ_SELECT); + do { tm->tm_sec = maple_clock_read(RTC_SECONDS); tm->tm_min = maple_clock_read(RTC_MINUTES); tm->tm_hour = maple_clock_read(RTC_HOURS); tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH); tm->tm_mon = maple_clock_read(RTC_MONTH); tm->tm_year = maple_clock_read(RTC_YEAR); - uip |= maple_clock_read(RTC_FREQ_SELECT); - if ((uip & RTC_UIP)==0) - break; - } + } while (tm->tm_sec != maple_clock_read(RTC_SECONDS)); if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index fa8b4d7b5de..eacbfd9beab 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -161,9 +161,7 @@ static void __init bootx_dt_add_prop(char *name, void *data, int size, static void __init bootx_add_chosen_props(unsigned long base, unsigned long *mem_end) { - u32 val = _MACH_Pmac; - - bootx_dt_add_prop("linux,platform", &val, 4, mem_end); + u32 val; if (bootx_info->kernelParamsOffset) { char *args = (char *)((unsigned long)bootx_info) + @@ -493,7 +491,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) && (strcmp(model, "iMac,1") == 0 || strcmp(model, "PowerMac1,1") == 0)) { bootx_printf("iMac,1 detected, shutting down USB \n"); - out_le32((unsigned *)0x80880008, 1); /* XXX */ + out_le32((unsigned __iomem *)0x80880008, 1); /* XXX */ } } diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index a415e8d2f7a..b57e465a1b7 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -21,6 +21,7 @@ #include <linux/cpufreq.h> #include <linux/init.h> #include <linux/completion.h> +#include <linux/mutex.h> #include <asm/prom.h> #include <asm/machdep.h> #include <asm/irq.h> @@ -90,7 +91,7 @@ static void (*g5_switch_volt)(int speed_mode); static int (*g5_switch_freq)(int speed_mode); static int (*g5_query_freq)(void); -static DECLARE_MUTEX(g5_switch_mutex); +static DEFINE_MUTEX(g5_switch_mutex); static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ @@ -327,7 +328,7 @@ static int g5_cpufreq_target(struct cpufreq_policy *policy, if (g5_pmode_cur == newstate) return 0; - down(&g5_switch_mutex); + mutex_lock(&g5_switch_mutex); freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; freqs.new = g5_cpu_freqs[newstate].frequency; @@ -337,7 +338,7 @@ static int g5_cpufreq_target(struct cpufreq_policy *policy, rc = g5_switch_freq(newstate); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - up(&g5_switch_mutex); + mutex_unlock(&g5_switch_mutex); return rc; } diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index e49eddd5042..a5063cd675c 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2951,7 +2951,7 @@ static void *pmac_early_vresume_data; void pmac_set_early_video_resume(void (*proc)(void *data), void *data) { - if (_machine != _MACH_Pmac) + if (!machine_is(powermac)) return; preempt_disable(); pmac_early_vresume_proc = proc; diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 87eb6bb7f0e..e14f9ac55cf 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -1457,6 +1457,9 @@ int __init pmac_i2c_init(void) return 0; i2c_inited = 1; + if (!machine_is(powermac)) + return 0; + /* Probe keywest-i2c busses */ kw_i2c_probe(); diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index 5fd28995c74..262f967b880 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -74,7 +74,7 @@ struct core99_header { * Read and write the non-volatile RAM on PowerMacs and CHRP machines. */ static int nvram_naddrs; -static volatile unsigned char *nvram_data; +static volatile unsigned char __iomem *nvram_data; static int is_core_99; static int core99_bank = 0; static int nvram_partitions[3]; @@ -148,7 +148,7 @@ static ssize_t core99_nvram_size(void) } #ifdef CONFIG_PPC32 -static volatile unsigned char *nvram_addr; +static volatile unsigned char __iomem *nvram_addr; static int nvram_mult; static unsigned char direct_nvram_read_byte(int addr) @@ -285,7 +285,7 @@ static int sm_erase_bank(int bank) int stat, i; unsigned long timeout; - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank); @@ -317,7 +317,7 @@ static int sm_write_bank(int bank, u8* datas) int i, stat = 0; unsigned long timeout; - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; DBG("nvram: Sharp/Micron Writing bank %d...\n", bank); @@ -352,7 +352,7 @@ static int amd_erase_bank(int bank) int i, stat = 0; unsigned long timeout; - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; DBG("nvram: AMD Erasing bank %d...\n", bank); @@ -399,7 +399,7 @@ static int amd_write_bank(int bank, u8* datas) int i, stat = 0; unsigned long timeout; - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; DBG("nvram: AMD Writing bank %d...\n", bank); @@ -597,7 +597,7 @@ int __init pmac_nvram_init(void) } #ifdef CONFIG_PPC32 - if (_machine == _MACH_chrp && nvram_naddrs == 1) { + if (machine_is(chrp) && nvram_naddrs == 1) { nvram_data = ioremap(r1.start, s1); nvram_mult = 1; ppc_md.nvram_read_val = direct_nvram_read_byte; diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index de3f30e6b33..f5d8d15d74f 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1201,7 +1201,7 @@ void __init pmac_pcibios_after_init(void) #ifdef CONFIG_PPC32 void pmac_pci_fixup_cardbus(struct pci_dev* dev) { - if (_machine != _MACH_Pmac) + if (!machine_is(powermac)) return; /* * Fix the interrupt routing on the various cardbus bridges @@ -1244,8 +1244,9 @@ void pmac_pci_fixup_pciata(struct pci_dev* dev) * On PowerMacs, we try to switch any PCI ATA controller to * fully native mode */ - if (_machine != _MACH_Pmac) + if (!machine_is(powermac)) return; + /* Some controllers don't have the class IDE */ if (dev->vendor == PCI_VENDOR_ID_PROMISE) switch(dev->device) { diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c index 9b7150f1041..a3bd3e728fa 100644 --- a/arch/powerpc/platforms/powermac/pfunc_base.c +++ b/arch/powerpc/platforms/powermac/pfunc_base.c @@ -336,6 +336,8 @@ int __init pmac_pfunc_base_install(void) return 0; pfbase_inited = 1; + if (!machine_is(powermac)) + return 0; DBG("Installing base platform functions...\n"); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 385aab90c4d..4d15e396655 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -350,6 +350,13 @@ static void __init pmac_setup_arch(void) smp_ops = &psurge_smp_ops; #endif #endif /* CONFIG_SMP */ + +#ifdef CONFIG_ADB + if (strstr(cmd_line, "adb_sync")) { + extern int __adb_probe_sync; + __adb_probe_sync = 1; + } +#endif /* CONFIG_ADB */ } char *bootpath; @@ -576,30 +583,6 @@ pmac_halt(void) pmac_power_off(); } -#ifdef CONFIG_PPC32 -void __init pmac_init(void) -{ - /* isa_io_base gets set in pmac_pci_init */ - isa_mem_base = PMAC_ISA_MEM_BASE; - pci_dram_offset = PMAC_PCI_DRAM_OFFSET; - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 1; - DMA_MODE_WRITE = 2; - - ppc_md = pmac_md; - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; - ppc_ide_md.default_io_base = pmac_ide_get_base; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ - - if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0); - -} -#endif - /* * Early initialization. */ @@ -646,6 +629,12 @@ static int __init pmac_declare_of_platform_devices(void) { struct device_node *np; + if (machine_is(chrp)) + return -1; + + if (!machine_is(powermac)) + return 0; + np = of_find_node_by_name(NULL, "valkyrie"); if (np) of_platform_device_create(np, "valkyrie", NULL); @@ -666,12 +655,15 @@ device_initcall(pmac_declare_of_platform_devices); /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init pmac_probe(int platform) +static int __init pmac_probe(void) { -#ifdef CONFIG_PPC64 - if (platform != PLATFORM_POWERMAC) + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "Power Macintosh") && + !of_flat_dt_is_compatible(root, "MacRISC")) return 0; +#ifdef CONFIG_PPC64 /* * On U3, the DART (iommu) must be allocated now since it * has an impact on htab_initialize (due to the large page it @@ -681,6 +673,23 @@ static int __init pmac_probe(int platform) alloc_dart_table(); #endif +#ifdef CONFIG_PPC32 + /* isa_io_base gets set in pmac_pci_init */ + isa_mem_base = PMAC_ISA_MEM_BASE; + pci_dram_offset = PMAC_PCI_DRAM_OFFSET; + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 1; + DMA_MODE_WRITE = 2; + +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) +#ifdef CONFIG_BLK_DEV_IDE_PMAC + ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; + ppc_ide_md.default_io_base = pmac_ide_get_base; +#endif /* CONFIG_BLK_DEV_IDE_PMAC */ +#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ + +#endif /* CONFIG_PPC32 */ + #ifdef CONFIG_PMAC_SMU /* * SMU based G5s need some memory below 2Gb, at least the current @@ -709,10 +718,8 @@ static int pmac_pci_probe_mode(struct pci_bus *bus) } #endif -struct machdep_calls __initdata pmac_md = { -#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64) - .cpu_die = generic_mach_cpu_die, -#endif +define_machine(powermac) { + .name = "PowerMac", .probe = pmac_probe, .setup_arch = pmac_setup_arch, .init_early = pmac_init_early, @@ -733,7 +740,7 @@ struct machdep_calls __initdata pmac_md = { .progress = udbg_progress, #ifdef CONFIG_PPC64 .pci_probe_mode = pmac_pci_probe_mode, - .idle_loop = native_idle, + .power_save = power4_idle, .enable_pmcs = power4_enable_pmcs, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, @@ -746,4 +753,7 @@ struct machdep_calls __initdata pmac_md = { .pcibios_after_init = pmac_pcibios_after_init, .phys_mem_access_prot = pci_phys_mem_access_prot, #endif +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64) + .cpu_die = generic_mach_cpu_die, +#endif }; diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 5d9afa1fa02..890758aa966 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -336,10 +336,10 @@ static struct pmu_sleep_notifier time_sleep_notifier = { */ void __init pmac_calibrate_decr(void) { -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_ADB_PMU) /* XXX why here? */ pmu_register_sleep_notifier(&time_sleep_notifier); -#endif /* CONFIG_PM */ +#endif generic_calibrate_decr(); diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index c4352a8db64..b4fa9f03b46 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -116,7 +116,7 @@ void udbg_scc_init(int force_scc) /* Setup for 57600 8N1 */ if (ch == ch_a) addr += 0x20; - sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ; + sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ; sccc += addr & ~PAGE_MASK; sccd = sccc + 0x10; diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 2ab9dcdfb41..9b2b1cb117b 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1018,7 +1018,7 @@ static int __init eeh_init_proc(void) { struct proc_dir_entry *e; - if (platform_is_pseries()) { + if (machine_is(pseries)) { e = create_proc_entry("ppc64/eeh", 0, NULL); if (e) e->proc_fops = &proc_eeh_operations; diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index b811d5ff92f..cc2495a0cdd 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -257,6 +257,7 @@ void handle_eeh_events (struct eeh_event *event) struct pci_bus *frozen_bus; int rc = 0; enum pci_ers_result result = PCI_ERS_RESULT_NONE; + const char *pci_str, *drv_str; frozen_dn = find_device_pe(event->dn); frozen_bus = pcibios_find_pci_bus(frozen_dn); @@ -291,6 +292,13 @@ void handle_eeh_events (struct eeh_event *event) frozen_pdn = PCI_DN(frozen_dn); frozen_pdn->eeh_freeze_count++; + + pci_str = pci_name (frozen_pdn->pcidev); + drv_str = pcid_name (frozen_pdn->pcidev); + if (!pci_str) { + pci_str = pci_name (event->dev); + drv_str = pcid_name (event->dev); + } if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES) goto hard_fail; @@ -306,9 +314,7 @@ void handle_eeh_events (struct eeh_event *event) eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */); printk(KERN_WARNING "EEH: This PCI device has failed %d times since last reboot: %s - %s\n", - frozen_pdn->eeh_freeze_count, - pci_name (frozen_pdn->pcidev), - pcid_name(frozen_pdn->pcidev)); + frozen_pdn->eeh_freeze_count, drv_str, pci_str); /* Walk the various device drivers attached to this slot through * a reset sequence, giving each an opportunity to do what it needs @@ -360,9 +366,7 @@ hard_fail: "EEH: PCI device %s - %s has failed %d times \n" "and has been permanently disabled. Please try reseating\n" "this device or replacing it.\n", - pci_name (frozen_pdn->pcidev), - pcid_name(frozen_pdn->pcidev), - frozen_pdn->eeh_freeze_count); + drv_str, pci_str, frozen_pdn->eeh_freeze_count); eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */); diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 989f4bc136c..c01d8f0cbe6 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -91,7 +91,7 @@ void __init fw_feature_init(void) continue; /* we have a match */ - ppc64_firmware_features |= + powerpc_firmware_features |= firmware_features_table[i].val; break; } diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c index 138e128a388..ba6befd9663 100644 --- a/arch/powerpc/platforms/pseries/hvconsole.c +++ b/arch/powerpc/platforms/pseries/hvconsole.c @@ -62,6 +62,11 @@ int hvc_put_chars(uint32_t vtermno, const char *buf, int count) unsigned long *lbuf = (unsigned long *) buf; long ret; + + /* hcall will ret H_PARAMETER if 'count' exceeds firmware max.*/ + if (count > MAX_VIO_PUT_CHARS) + count = MAX_VIO_PUT_CHARS; + ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0], lbuf[1]); if (ret == H_Success) diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 946ad59e335..e97e67f5e07 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -120,7 +120,7 @@ static void fixup_winbond_82c105(struct pci_dev* dev) int i; unsigned int reg; - if (!platform_is_pseries()) + if (!machine_is(pseries)) return; printk("Using INTC for W82c105 IDE controller.\n"); diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 44abdeb9ca0..6bfacc21708 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -28,6 +28,7 @@ #include <linux/pci.h> #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> +#include <asm/firmware.h> static struct pci_bus * find_bus_among_children(struct pci_bus *bus, @@ -152,20 +153,24 @@ pcibios_pci_config_bridge(struct pci_dev *dev) void pcibios_add_pci_devices(struct pci_bus * bus) { - int slotno, num; + int slotno, num, mode; struct pci_dev *dev; struct device_node *dn = pci_bus_to_OF_node(bus); eeh_add_device_tree_early(dn); - if (_machine == PLATFORM_PSERIES_LPAR) { + mode = PCI_PROBE_NORMAL; + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + + if (mode == PCI_PROBE_DEVTREE) { /* use ofdt-based probe */ of_scan_bus(dn, bus); if (!list_empty(&bus->devices)) { pcibios_fixup_new_pci_devices(bus, 0); pci_bus_add_devices(bus); } - } else { + } else if (mode == PCI_PROBE_NORMAL) { /* use legacy probe */ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index b046bcf7443..9639c66b453 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -132,7 +132,7 @@ static int __init init_ras_IRQ(void) of_node_put(np); } - return 1; + return 0; } __initcall(init_ras_IRQ); diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 86cfa6ecdcf..1773103354b 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -17,8 +17,9 @@ #include <linux/proc_fs.h> #include <asm/prom.h> -#include <asm/pSeries_reconfig.h> +#include <asm/machdep.h> #include <asm/uaccess.h> +#include <asm/pSeries_reconfig.h> @@ -94,16 +95,16 @@ static struct device_node *derive_parent(const char *path) return parent; } -static struct notifier_block *pSeries_reconfig_chain; +static BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain); int pSeries_reconfig_notifier_register(struct notifier_block *nb) { - return notifier_chain_register(&pSeries_reconfig_chain, nb); + return blocking_notifier_chain_register(&pSeries_reconfig_chain, nb); } void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { - notifier_chain_unregister(&pSeries_reconfig_chain, nb); + blocking_notifier_chain_unregister(&pSeries_reconfig_chain, nb); } static int pSeries_reconfig_add_node(const char *path, struct property *proplist) @@ -131,7 +132,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist goto out_err; } - err = notifier_call_chain(&pSeries_reconfig_chain, + err = blocking_notifier_call_chain(&pSeries_reconfig_chain, PSERIES_RECONFIG_ADD, np); if (err == NOTIFY_BAD) { printk(KERN_ERR "Failed to add device node %s\n", path); @@ -171,7 +172,7 @@ static int pSeries_reconfig_remove_node(struct device_node *np) remove_node_proc_entries(np); - notifier_call_chain(&pSeries_reconfig_chain, + blocking_notifier_call_chain(&pSeries_reconfig_chain, PSERIES_RECONFIG_REMOVE, np); of_detach_node(np); @@ -508,7 +509,7 @@ static int proc_ppc64_create_ofdt(void) { struct proc_dir_entry *ent; - if (!platform_is_pseries()) + if (!machine_is(pseries)) return 0; ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL); diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index a6f628d4c9d..fcc4d561a23 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -27,6 +27,7 @@ #include <asm/prom.h> #include <asm/nvram.h> #include <asm/atomic.h> +#include <asm/machdep.h> #if 0 #define DEBUG(A...) printk(KERN_ERR A) @@ -481,7 +482,7 @@ static int __init rtas_init(void) { struct proc_dir_entry *entry; - if (!platform_is_pseries()) + if (!machine_is(pseries)) return 0; /* No RTAS */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 44d5c7fdcd9..b2fbf8ba8fb 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -81,8 +81,8 @@ extern void find_udbg_vterm(void); int fwnmi_active; /* TRUE if an FWNMI handler is present */ -static void pseries_shared_idle(void); -static void pseries_dedicated_idle(void); +static void pseries_shared_idle_sleep(void); +static void pseries_dedicated_idle_sleep(void); struct mpic *pSeries_mpic; @@ -236,14 +236,13 @@ static void __init pSeries_setup_arch(void) vpa_init(boot_cpuid); if (get_lppaca()->shared_proc) { printk(KERN_INFO "Using shared processor idle loop\n"); - ppc_md.idle_loop = pseries_shared_idle; + ppc_md.power_save = pseries_shared_idle_sleep; } else { printk(KERN_INFO "Using dedicated idle loop\n"); - ppc_md.idle_loop = pseries_dedicated_idle; + ppc_md.power_save = pseries_dedicated_idle_sleep; } } else { printk(KERN_INFO "Using default idle loop\n"); - ppc_md.idle_loop = default_idle; } if (firmware_has_feature(FW_FEATURE_LPAR)) @@ -373,156 +372,123 @@ static int pSeries_check_legacy_ioport(unsigned int baseport) /* * Called very early, MMU is off, device-tree isn't unflattened */ -extern struct machdep_calls pSeries_md; -static int __init pSeries_probe(int platform) +static int __init pSeries_probe_hypertas(unsigned long node, + const char *uname, int depth, + void *data) { - if (platform != PLATFORM_PSERIES && - platform != PLATFORM_PSERIES_LPAR) - return 0; - - /* if we have some ppc_md fixups for LPAR to do, do - * it here ... - */ + if (depth != 1 || + (strcmp(uname, "rtas") != 0 && strcmp(uname, "rtas@0") != 0)) + return 0; - if (platform == PLATFORM_PSERIES_LPAR) - ppc64_firmware_features |= FW_FEATURE_LPAR; + if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL) + powerpc_firmware_features |= FW_FEATURE_LPAR; - return 1; + return 1; } -DECLARE_PER_CPU(unsigned long, smt_snooze_delay); - -static inline void dedicated_idle_sleep(unsigned int cpu) +static int __init pSeries_probe(void) { - struct lppaca *plppaca = &lppaca[cpu ^ 1]; + char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), + "device_type", NULL); + if (dtype == NULL) + return 0; + if (strcmp(dtype, "chrp")) + return 0; - /* Only sleep if the other thread is not idle */ - if (!(plppaca->idle)) { - local_irq_disable(); + DBG("pSeries detected, looking for LPAR capability...\n"); - /* - * We are about to sleep the thread and so wont be polling any - * more. - */ - clear_thread_flag(TIF_POLLING_NRFLAG); - smp_mb__after_clear_bit(); - - /* - * SMT dynamic mode. Cede will result in this thread going - * dormant, if the partner thread is still doing work. Thread - * wakes up if partner goes idle, an interrupt is presented, or - * a prod occurs. Returning from the cede enables external - * interrupts. - */ - if (!need_resched()) - cede_processor(); - else - local_irq_enable(); - set_thread_flag(TIF_POLLING_NRFLAG); - } else { - /* - * Give the HV an opportunity at the processor, since we are - * not doing any work. - */ - poll_pending(); - } + /* Now try to figure out if we are running on LPAR */ + of_scan_flat_dt(pSeries_probe_hypertas, NULL); + + DBG("Machine is%s LPAR !\n", + (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not"); + + return 1; } -static void pseries_dedicated_idle(void) + +DECLARE_PER_CPU(unsigned long, smt_snooze_delay); + +static void pseries_dedicated_idle_sleep(void) { unsigned int cpu = smp_processor_id(); unsigned long start_snooze; unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); - set_thread_flag(TIF_POLLING_NRFLAG); - - while (1) { - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - get_lppaca()->idle = 1; - - if (!need_resched()) { - start_snooze = get_tb() + - *smt_snooze_delay * tb_ticks_per_usec; - - while (!need_resched() && !cpu_is_offline(cpu)) { - ppc64_runlatch_off(); - - /* - * Go into low thread priority and possibly - * low power mode. - */ - HMT_low(); - HMT_very_low(); - - if (*smt_snooze_delay != 0 && - get_tb() > start_snooze) { - HMT_medium(); - dedicated_idle_sleep(cpu); - } - - } - - HMT_medium(); - } - - get_lppaca()->idle = 0; - ppc64_runlatch_on(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + get_lppaca()->idle = 1; - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - } -} + /* + * We come in with interrupts disabled, and need_resched() + * has been checked recently. If we should poll for a little + * while, do so. + */ + if (*smt_snooze_delay) { + start_snooze = get_tb() + + *smt_snooze_delay * tb_ticks_per_usec; + local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); -static void pseries_shared_idle(void) -{ - unsigned int cpu = smp_processor_id(); + while (get_tb() < start_snooze) { + if (need_resched() || cpu_is_offline(cpu)) + goto out; + ppc64_runlatch_off(); + HMT_low(); + HMT_very_low(); + } - while (1) { - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - get_lppaca()->idle = 1; + HMT_medium(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb(); + local_irq_disable(); + if (need_resched() || cpu_is_offline(cpu)) + goto out; + } - while (!need_resched() && !cpu_is_offline(cpu)) { - local_irq_disable(); - ppc64_runlatch_off(); + /* + * Cede if the other thread is not idle, so that it can + * go single-threaded. If the other thread is idle, + * we ask the hypervisor if it has pending work it + * wants to do and cede if it does. Otherwise we keep + * polling in order to reduce interrupt latency. + * + * Doing the cede when the other thread is active will + * result in this thread going dormant, meaning the other + * thread gets to run in single-threaded (ST) mode, which + * is slightly faster than SMT mode with this thread at + * very low priority. The cede enables interrupts, which + * doesn't matter here. + */ + if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending) + cede_processor(); - /* - * Yield the processor to the hypervisor. We return if - * an external interrupt occurs (which are driven prior - * to returning here) or if a prod occurs from another - * processor. When returning here, external interrupts - * are enabled. - * - * Check need_resched() again with interrupts disabled - * to avoid a race. - */ - if (!need_resched()) - cede_processor(); - else - local_irq_enable(); - - HMT_medium(); - } +out: + HMT_medium(); + get_lppaca()->idle = 0; +} - get_lppaca()->idle = 0; - ppc64_runlatch_on(); +static void pseries_shared_idle_sleep(void) +{ + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + get_lppaca()->idle = 1; - preempt_enable_no_resched(); - schedule(); - preempt_disable(); + /* + * Yield the processor to the hypervisor. We return if + * an external interrupt occurs (which are driven prior + * to returning here) or if a prod occurs from another + * processor. When returning here, external interrupts + * are enabled. + */ + cede_processor(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - } + get_lppaca()->idle = 0; } static int pSeries_pci_probe_mode(struct pci_bus *bus) @@ -553,7 +519,8 @@ static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) } #endif -struct machdep_calls __initdata pSeries_md = { +define_machine(pseries) { + .name = "pSeries", .probe = pSeries_probe, .setup_arch = pSeries_setup_arch, .init_early = pSeries_init_early, diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index eb86cdb9b80..4864cb32be2 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -500,7 +500,7 @@ nextnode: np; np = of_find_node_by_type(np, "cpu")) { ireg = (uint *)get_property(np, "reg", &ilen); - if (ireg && ireg[0] == boot_cpuid_phys) { + if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) { ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen); i = ilen / sizeof(int); @@ -541,7 +541,7 @@ nextnode: ops = &pSeriesLP_ops; else { #ifdef CONFIG_SMP - for_each_cpu(i) { + for_each_possible_cpu(i) { int hard_id; /* FIXME: Do this dynamically! --RR */ diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 49eb2a7e65c..a892356d5c3 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -126,11 +126,11 @@ static int numReadBufs = 4, readbufSize = 32; */ static volatile cbd_t *rx_base, *rx_cur, *tx_base, *tx_cur; -MODULE_PARM(catchRadius, "i"); -MODULE_PARM(numBufs, "i"); -MODULE_PARM(bufSize, "i"); -MODULE_PARM(numreadBufs, "i"); -MODULE_PARM(readbufSize, "i"); +module_param(catchRadius, int, 0); +module_param(numBufs, int, 0); +module_param(bufSize, int, 0); +module_param(numreadBufs, int, 0); +module_param(readbufSize, int, 0); #define arraysize(x) (sizeof(x)/sizeof(*(x))) #define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff)) diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 54a0a9bb12d..e9a8f5d1dfc 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -19,6 +19,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -57,15 +61,15 @@ config 6xx select PPC_FPU help There are four types of PowerPC chips supported. The more common - types (601, 603, 604, 740, 750, 7400), the Motorola embedded - versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM - embedded versions (403 and 405) and the POWER3 processor. - (For support for more recent 64-bit processors, set ARCH=powerpc.) + types (601, 603, 604, 740, 750, 7400), the older Freescale + (formerly Motorola) embedded versions (821, 823, 850, 855, 860, + 52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and + the Book E embedded processors from IBM (44x) and Freescale (85xx). + For support for 64-bit processors, set ARCH=powerpc. Unless you are building a kernel for one of the embedded processor - systems or a POWER3-based IBM RS/6000, choose 6xx. - Note that the kernel runs in 32-bit mode even on 64-bit chips. - Also note that because the 52xx, 82xx, & 83xx family has a 603e core, - specific support for that chipset is asked later on. + systems, choose 6xx. + Also note that because the 52xx, 82xx, & 83xx family have a 603e + core, specific support for that chipset is asked later on. config 40x bool "40x" @@ -73,10 +77,6 @@ config 40x config 44x bool "44x" -config POWER3 - select PPC_FPU - bool "POWER3" - config 8xx bool "8xx" @@ -248,14 +248,9 @@ config PPC601_SYNC_FIX source arch/ppc/platforms/4xx/Kconfig source arch/ppc/platforms/85xx/Kconfig -config PPC64BRIDGE - bool - depends on POWER3 - default y - config PPC_STD_MMU bool - depends on 6xx || POWER3 + depends on 6xx default y config NOT_COHERENT_CACHE @@ -530,8 +525,8 @@ endmenu choice prompt "Machine Type" - depends on 6xx || POWER3 - default PPC_MULTIPLATFORM + depends on 6xx + default PPC_PREP ---help--- Linux currently supports several different kinds of PowerPC-based machines: Apple Power Macintoshes and clones (such as the Motorola @@ -541,15 +536,14 @@ choice Platform) machines (including all of the recent IBM RS/6000 and pSeries machines), and several embedded PowerPC systems containing 4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the - default option is to build a kernel which works on PReP and CHRP. + default option is to build a kernel which works on PReP. - Note that support for Apple machines is now only available with - ARCH=powerpc, and has been removed from this menu. If you wish - to build a kernel for an Apple machine, exit this configuration - process and re-run it with ARCH=powerpc. + Note that support for Apple and CHRP machines is now only available + with ARCH=powerpc, and has been removed from this menu. If you + wish to build a kernel for an Apple or CHRP machine, exit this + configuration process and re-run it with ARCH=powerpc. - Select CHRP/PReP if configuring for an IBM RS/6000 or - pSeries machine, or a PReP machine. + Select PReP if configuring for a PReP machine. Select Gemini if configuring for a Synergy Microsystems' Gemini series Single Board Computer. More information is available at: @@ -558,8 +552,8 @@ choice Select APUS if configuring for a PowerUP Amiga. More information is available at: <http://linux-apus.sourceforge.net/>. -config PPC_MULTIPLATFORM - bool "CHRP/PReP" +config PPC_PREP + bool "PReP" config APUS bool "Amiga-APUS" @@ -711,6 +705,13 @@ config LITE5200 much but it's only been tested on this board version. I think this board is also known as IceCube. +config LITE5200B + bool "Freescale LITE5200B" + depends LITE5200 + help + Support for the LITE5200B dev board for the MPC5200 from Freescale. + This is the new board with 2 PCI slots. + config MPC834x_SYS bool "Freescale MPC834x SYS" help @@ -796,25 +797,6 @@ config CPM2 you wish to build a kernel for a machine with a CPM2 coprocessor on it (826x, 827x, 8560). -config PPC_CHRP - bool "Support for CHRP (Common Hardware Reference Platform) machines" - depends on PPC_MULTIPLATFORM - select PPC_I8259 - select PPC_INDIRECT_PCI - default y - -config PPC_PREP - bool "Support for PReP (PowerPC Reference Platform) machines" - depends on PPC_MULTIPLATFORM - select PPC_I8259 - select PPC_INDIRECT_PCI - default y - -config PPC_OF - bool - depends on PPC_CHRP - default y - config PPC_GEN550 bool depends on SANDPOINT || SPRUCE || PPLUS || \ @@ -973,14 +955,6 @@ source "mm/Kconfig" source "fs/Kconfig.binfmt" -config PROC_DEVICETREE - bool "Support for Open Firmware device tree in /proc" - depends on PPC_OF && PROC_FS - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware. If unsure, say Y here. - config PREP_RESIDUAL bool "Support for PReP Residual Data" depends on PPC_PREP @@ -1173,8 +1147,7 @@ menu "Bus options" config ISA bool "Support for ISA-bus hardware" - depends on PPC_PREP || PPC_CHRP - select PPC_I8259 + depends on PPC_PREP help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff @@ -1184,18 +1157,18 @@ config ISA config GENERIC_ISA_DMA bool - depends on POWER3 || 6xx && !CPM2 + depends on 6xx && !CPM2 default y config PPC_I8259 bool - default y if 85xx + default y if 85xx || PPC_PREP default n config PPC_INDIRECT_PCI bool depends on PCI - default y if 40x || 44x || 85xx || 83xx + default y if 40x || 44x || 85xx || 83xx || PPC_PREP default n config EISA @@ -1386,7 +1359,7 @@ config CONSISTENT_SIZE config BOOT_LOAD_BOOL bool "Set the boot link/load address" - depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM + depends on ADVANCED_OPTIONS && !PPC_PREP help This option allows you to set the initial load address of the zImage or zImage.initrd file. This can be useful if you are on a board diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug index 8cc75abf3d8..f94b8774097 100644 --- a/arch/ppc/Kconfig.debug +++ b/arch/ppc/Kconfig.debug @@ -53,13 +53,6 @@ config BDI_SWITCH Unless you are intending to debug the kernel with one of these machines, say N here. -config BOOTX_TEXT - bool "Support for early boot text console (BootX or OpenFirmware only)" - depends PPC_OF - help - Say Y here to see progress messages from the boot firmware in text - mode. Requires either BootX or Open Firmware. - config SERIAL_TEXT_DEBUG bool "Support for early boot texts over serial port" depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \ diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 98e940beeb3..0db66dcf072 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -40,10 +40,8 @@ ifndef CONFIG_FSL_BOOKE CFLAGS += -mstring endif -cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec -cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec cpu-as-$(CONFIG_E500) += -Wa,-me500 cpu-as-$(CONFIG_E200) += -Wa,-me200 @@ -59,8 +57,6 @@ head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o -head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o -head-$(CONFIG_POWER4) += arch/ppc/kernel/idle_power4.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ @@ -71,7 +67,7 @@ core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/ core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/ core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ -core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ +core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/ppc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/ @@ -82,7 +78,7 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm -.PHONY: $(BOOT_TARGETS) +PHONY += $(BOOT_TARGETS) all: uImage zImage diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile index f565699a9fe..b739e25d472 100644 --- a/arch/ppc/boot/Makefile +++ b/arch/ppc/boot/Makefile @@ -1,3 +1,9 @@ +# +# arch/ppc/boot/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -13,16 +19,15 @@ HOSTCFLAGS += -Iarch/$(ARCH)/boot/include BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd bootdir-y := simple -bootdir-$(CONFIG_PPC_OF) += openfirmware subdir-y := lib common images -subdir-$(CONFIG_PPC_MULTIPLATFORM) += of1275 +subdir-$(CONFIG_PPC_PREP) += of1275 # for cleaning -subdir- += simple openfirmware +subdir- += simple -hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree) +hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree) -.PHONY: $(BOOT_TARGETS) $(bootdir-y) +PHONY += $(BOOT_TARGETS) $(bootdir-y) $(BOOT_TARGETS): $(bootdir-y) diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile deleted file mode 100644 index 2a411ec2e65..00000000000 --- a/arch/ppc/boot/openfirmware/Makefile +++ /dev/null @@ -1,106 +0,0 @@ -# Makefile for making bootable images on various OpenFirmware machines. -# -# Paul Mackerras January 1997 -# XCOFF bootable images for PowerMacs -# Geert Uytterhoeven September 1997 -# ELF bootable iamges for CHRP machines. -# Tom Rini January 2001 -# Cleaned up, moved into arch/ppc/boot/pmac -# Tom Rini July/August 2002 -# Merged 'chrp' and 'pmac' into 'openfirmware', and cleaned up the -# rules. - -zImage.initrd znetboot.initrd: del-ramdisk-sec := -R .ramdisk -zImage.initrd znetboot.initrd: initrd := .initrd - - -boot := arch/ppc/boot -common := $(boot)/common -utils := $(boot)/utils -bootlib := $(boot)/lib -of1275 := $(boot)/of1275 -images := $(boot)/images - -CHRP_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00800000 - -COMMONOBJS := start.o misc.o common.o -CHRPOBJS := crt0.o $(COMMONOBJS) chrpmain.o - -targets := $(CHRPOBJS) dummy.o -CHRPOBJS := $(addprefix $(obj)/, $(CHRPOBJS)) - -LIBS := lib/lib.a $(bootlib)/lib.a $(of1275)/lib.a $(common)/lib.a - -ifdef CONFIG_SMP -END := .smp -endif -ifdef CONFIG_PPC64BRIDGE -END += .64 -endif - - -$(images)/ramdisk.image.gz: - @echo ' MISSING $@' - @echo ' RAM disk image must be provided separately' - @/bin/false - -quiet_cmd_genimage = GEN $@ - cmd_genimage = $(OBJCOPY) -R .comment \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data $< $@ - -targets += image.o -$(obj)/image.o: $(obj)/dummy.o $(images)/vmlinux.gz FORCE - $(call if_changed,genimage) - -# Place the ramdisk in the initrd image. -quiet_cmd_genimage-initrd = GEN $@ - cmd_genimage-initrd = $(OBJCOPY) $< $@ \ - --add-section=.ramdisk=$(images)/ramdisk.image.gz \ - --set-section-flags=.ramdisk=contents,alloc,load,readonly,data -targets += image.initrd.o -$(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE - $(call if_changed,genimage-initrd) - - -targets += crt0.o -$(obj)/crt0.o: $(common)/crt0.S FORCE - $(call if_changed_dep,as_o_S) - -quiet_cmd_gen-chrp = CHRP $@ - cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \ - $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec) - -$(images)/zImage.chrp: $(obj)/image.o $(CHRPOBJS) $(LIBS) \ - $(srctree)/$(boot)/ld.script - $(call cmd,gen-chrp) -$(images)/zImage.initrd.chrp: $(obj)/image.initrd.o $(CHRPOBJS) $(LIBS) \ - $(srctree)/$(boot)/ld.script - $(call cmd,gen-chrp) - -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = cat $< > $@ && $(utils)/addnote $@ -$(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \ - %-rs6k: % - $(call cmd,addnote) - -# The targets used on the make command-line - -.PHONY: zImage zImage.initrd -zImage: $(images)/zImage.chrp \ - $(images)/zImage.chrp-rs6k - @echo ' kernel: $@ is ready ($<)' -zImage.initrd: $(images)/zImage.initrd.chrp \ - $(images)/zImage.initrd.chrp-rs6k - @echo ' kernel: $@ is ready ($<)' - -TFTPIMAGE := /tftpboot/zImage - -.PHONY: znetboot znetboot.initrd -znetboot: $(images)/zImage.chrp - cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END) - @echo ' kernel: $@ is ready ($<)' -znetboot.initrd:$(images)/zImage.initrd.chrp - cp $(images)/zImage.initrd.chrp $(TFTPIMAGE).chrp$(END) - @echo ' kernel: $@ is ready ($<)' - diff --git a/arch/ppc/boot/openfirmware/chrpmain.c b/arch/ppc/boot/openfirmware/chrpmain.c deleted file mode 100644 index 245dbd9fc12..00000000000 --- a/arch/ppc/boot/openfirmware/chrpmain.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/string.h> -#include "nonstdio.h" -#include "of1275.h" -#include <asm/processor.h> -#include <asm/page.h> - -/* Passed from the linker */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin, __ramdisk_end; -extern char _start, _end; - -extern unsigned int heap_max; -extern void flush_cache(void *, unsigned long); -extern void gunzip(void *, int, unsigned char *, int *); -extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach, - unsigned int progend); - -char *avail_ram; -char *begin_avail, *end_avail; -char *avail_high; - -#define RAM_START 0x00000000 -#define RAM_END (64<<20) - -#define BOOT_START ((unsigned long)_start) -#define BOOT_END ((unsigned long)(_end + 0xFFF) & ~0xFFF) - -#define RAM_FREE ((unsigned long)(_end+0x1000)&~0xFFF) -#define PROG_START 0x00010000 -#define PROG_SIZE 0x007f0000 /* 8MB */ - -#define SCRATCH_SIZE (128 << 10) - -static char scratch[SCRATCH_SIZE]; /* 128k of scratch space for gunzip */ - -typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int); - -void -boot(int a1, int a2, void *prom) -{ - unsigned sa, len; - void *dst; - unsigned char *im; - unsigned int initrd_size, initrd_start; - - printf("chrpboot starting: loaded at 0x%p\n\r", &_start); - - initrd_size = &__ramdisk_end - &__ramdisk_begin; - if (initrd_size) { - initrd_start = (RAM_END - initrd_size) & ~0xFFF; - a1 = initrd_start; - a2 = initrd_size; - claim(initrd_start, RAM_END - initrd_start, 0); - printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r", - initrd_start, &__ramdisk_begin, initrd_size); - memcpy((char *)initrd_start, &__ramdisk_begin, initrd_size); - } else { - initrd_start = 0; - initrd_size = 0; - a2 = 0xdeadbeef; - } - - im = &__image_begin; - len = &__image_end - &__image_begin; - /* claim 4MB starting at PROG_START */ - claim(PROG_START, PROG_SIZE - PROG_START, 0); - dst = (void *) PROG_START; - if (im[0] == 0x1f && im[1] == 0x8b) { - avail_ram = scratch; - begin_avail = avail_high = avail_ram; - end_avail = scratch + sizeof(scratch); - printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len); - gunzip(dst, PROG_SIZE - PROG_START, im, &len); - printf("done %u bytes\n\r", len); - printf("%u bytes of heap consumed, max in use %u\n\r", - avail_high - begin_avail, heap_max); - } else { - memmove(dst, im, len); - } - - flush_cache(dst, len); - make_bi_recs(((unsigned long) dst + len), "chrpboot", _MACH_chrp, - (PROG_START + PROG_SIZE)); - - sa = PROG_START; - printf("start address = 0x%x\n\r", sa); - - (*(kernel_start_t)sa)(a1, a2, prom, initrd_start, initrd_size); - - printf("returned?\n\r"); - - pause(); -} diff --git a/arch/ppc/boot/openfirmware/common.c b/arch/ppc/boot/openfirmware/common.c deleted file mode 100644 index 0f46756a903..00000000000 --- a/arch/ppc/boot/openfirmware/common.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "nonstdio.h" -#include "of1275.h" -#include <linux/string.h> -#include <linux/zlib.h> -#include <asm/bootinfo.h> -#include <asm/page.h> - -/* Information from the linker */ - -extern int strcmp(const char *s1, const char *s2); -extern char *avail_ram, *avail_high; -extern char *end_avail; - -unsigned int heap_use, heap_max; - -struct memchunk { - unsigned int size; - struct memchunk *next; -}; - -static struct memchunk *freechunks; - -static void *zalloc(unsigned size) -{ - void *p; - struct memchunk **mpp, *mp; - - size = (size + 7) & -8; - heap_use += size; - if (heap_use > heap_max) - heap_max = heap_use; - for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) { - if (mp->size == size) { - *mpp = mp->next; - return mp; - } - } - p = avail_ram; - avail_ram += size; - if (avail_ram > avail_high) - avail_high = avail_ram; - if (avail_ram > end_avail) { - printf("oops... out of memory\n\r"); - pause(); - } - return p; -} - -#define HEAD_CRC 2 -#define EXTRA_FIELD 4 -#define ORIG_NAME 8 -#define COMMENT 0x10 -#define RESERVED 0xe0 - -void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) -{ - z_stream s; - int r, i, flags; - - /* skip header */ - i = 10; - flags = src[3]; - if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { - printf("bad gzipped data\n\r"); - exit(); - } - if ((flags & EXTRA_FIELD) != 0) - i = 12 + src[10] + (src[11] << 8); - if ((flags & ORIG_NAME) != 0) - while (src[i++] != 0) - ; - if ((flags & COMMENT) != 0) - while (src[i++] != 0) - ; - if ((flags & HEAD_CRC) != 0) - i += 2; - if (i >= *lenp) { - printf("gunzip: ran out of data in header\n\r"); - exit(); - } - - /* Initialize ourself. */ - s.workspace = zalloc(zlib_inflate_workspacesize()); - r = zlib_inflateInit2(&s, -MAX_WBITS); - if (r != Z_OK) { - printf("zlib_inflateInit2 returned %d\n\r", r); - exit(); - } - s.next_in = src + i; - s.avail_in = *lenp - i; - s.next_out = dst; - s.avail_out = dstlen; - r = zlib_inflate(&s, Z_FINISH); - if (r != Z_OK && r != Z_STREAM_END) { - printf("inflate returned %d msg: %s\n\r", r, s.msg); - exit(); - } - *lenp = s.next_out - (unsigned char *) dst; - zlib_inflateEnd(&s); -} - -/* Make a bi_rec in OF. We need to be passed a name for BI_BOOTLOADER_ID, - * a machine type for BI_MACHTYPE, and the location where the end of the - * bootloader is (PROG_START + PROG_SIZE) - */ -void make_bi_recs(unsigned long addr, char *name, unsigned int mach, - unsigned long progend) -{ - struct bi_record *rec; - - - /* leave a 1MB gap then align to the next 1MB boundary */ - addr = _ALIGN(addr+ (1<<20) - 1, (1<<20)); - /* oldworld machine seem very unhappy about this. -- Tom */ - if (addr >= progend) - claim(addr, 0x1000, 0); - - rec = (struct bi_record *)addr; - rec->tag = BI_FIRST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_BOOTLOADER_ID; - sprintf( (char *)rec->data, name); - rec->size = sizeof(struct bi_record) + strlen(name) + 1; - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_MACHTYPE; - rec->data[0] = mach; - rec->data[1] = 1; - rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_LAST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); -} diff --git a/arch/ppc/boot/openfirmware/dummy.c b/arch/ppc/boot/openfirmware/dummy.c deleted file mode 100644 index 31dbf45bf99..00000000000 --- a/arch/ppc/boot/openfirmware/dummy.c +++ /dev/null @@ -1,4 +0,0 @@ -int main(void) -{ - return 0; -} diff --git a/arch/ppc/boot/openfirmware/misc.S b/arch/ppc/boot/openfirmware/misc.S deleted file mode 100644 index ab9e897cadd..00000000000 --- a/arch/ppc/boot/openfirmware/misc.S +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - .text - -/* - * Use the BAT2 & 3 registers to map the 1st 16MB of RAM to - * the address given as the 1st argument. - */ - .globl setup_bats -setup_bats: - mfpvr 5 - rlwinm 5,5,16,16,31 /* r3 = 1 for 601, 4 for 604 */ - cmpwi 0,5,1 - li 0,0 - bne 4f - mtibatl 3,0 /* invalidate BAT first */ - ori 3,3,4 /* set up BAT registers for 601 */ - li 4,0x7f - mtibatu 2,3 - mtibatl 2,4 - oris 3,3,0x80 - oris 4,4,0x80 - mtibatu 3,3 - mtibatl 3,4 - b 5f -4: mtdbatu 3,0 /* invalidate BATs first */ - mtibatu 3,0 - ori 3,3,0xff /* set up BAT registers for 604 */ - li 4,2 - mtdbatl 2,4 - mtdbatu 2,3 - mtibatl 2,4 - mtibatu 2,3 - oris 3,3,0x80 - oris 4,4,0x80 - mtdbatl 3,4 - mtdbatu 3,3 - mtibatl 3,4 - mtibatu 3,3 -5: sync - isync - blr - -/* - * Flush the dcache and invalidate the icache for a range of addresses. - * - * flush_cache(addr, len) - */ - .global flush_cache -flush_cache: - addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */ - rlwinm. 4,4,27,5,31 - mtctr 4 - beqlr -1: dcbf 0,3 - icbi 0,3 - addi 3,3,0x20 - bdnz 1b - sync - isync - blr diff --git a/arch/ppc/boot/openfirmware/start.c b/arch/ppc/boot/openfirmware/start.c deleted file mode 100644 index 1617a26956b..00000000000 --- a/arch/ppc/boot/openfirmware/start.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdarg.h> -#include "of1275.h" - -extern int strlen(const char *s); -extern void boot(int a1, int a2, void *prom); - -phandle stdin; -phandle stdout; -phandle stderr; - -void printk(char *fmt, ...); - -void -start(int a1, int a2, void *promptr) -{ - ofinit(promptr); - if (ofstdio(&stdin, &stdout, &stderr)) - exit(); - - boot(a1, a2, promptr); - for (;;) - exit(); -} - -int writestring(void *f, char *ptr, int nb) -{ - int w = 0, i; - char *ret = "\r"; - - for (i = 0; i < nb; ++i) { - if (ptr[i] == '\n') { - if (i > w) { - write(f, ptr + w, i - w); - w = i; - } - write(f, ret, 1); - } - } - if (w < nb) - write(f, ptr + w, nb - w); - return nb; -} - -int -putc(int c, void *f) -{ - char ch = c; - - return writestring(f, &ch, 1) == 1? c: -1; -} - -int -putchar(int c) -{ - return putc(c, stdout); -} - -int -fputs(char *str, void *f) -{ - int n = strlen(str); - - return writestring(f, str, n) == n? 0: -1; -} - -int -readchar(void) -{ - char ch; - - for (;;) { - switch (read(stdin, &ch, 1)) { - case 1: - return ch; - case -1: - printk("read(stdin) returned -1\n"); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - putchar('\a'); - else { - putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -extern int vsprintf(char *buf, const char *fmt, va_list args); -static char sprint_buf[1024]; - -void -printk(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - writestring(stdout, sprint_buf, n); -} - -int -printf(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - writestring(stdout, sprint_buf, n); - return n; -} diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c index c24290823f7..8da8f576031 100644 --- a/arch/ppc/boot/simple/mpc10x_memory.c +++ b/arch/ppc/boot/simple/mpc10x_memory.c @@ -50,10 +50,10 @@ MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0) * the system. This assumes that the firmware has correctly set up the memory * controller registers. On CONFIG_PPC_PREP, we know we are being called * under a PReP memory map. On all other machines, we assume we are under - * a CHRP memory map. Further, on CONFIG_PPC_MULTIPLATFORM we must rename + * a CHRP memory map. Further, on CONFIG_PPC_PREP we must rename * this function. */ -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP #define get_mem_size mpc10x_get_mem_size #endif unsigned long diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S index 7efddc50756..2533113c1cc 100644 --- a/arch/ppc/boot/simple/relocate.S +++ b/arch/ppc/boot/simple/relocate.S @@ -194,7 +194,7 @@ start_ldr: /* * Start at the begining. */ -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP li r9,0xc mtlr r9 /* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD, diff --git a/arch/ppc/boot/utils/addnote.c b/arch/ppc/boot/utils/addnote.c deleted file mode 100644 index 6c52b18f2d0..00000000000 --- a/arch/ppc/boot/utils/addnote.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * Program to hack in a PT_NOTE program header entry in an ELF file. - * This is needed for OF on RS/6000s to load an image correctly. - * Note that OF needs a program header entry for the note, not an - * ELF section. - * - * Copyright 2000 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Usage: addnote zImage - */ -#include <stdio.h> -#include <stdlib.h> -#include <fcntl.h> -#include <unistd.h> -#include <string.h> - -char arch[] = "PowerPC"; - -#define N_DESCR 6 -unsigned int descr[N_DESCR] = { -#if 1 - /* values for IBM RS/6000 machines */ - 0xffffffff, /* real-mode = true */ - 0x00c00000, /* real-base, i.e. where we expect OF to be */ - 0xffffffff, /* real-size */ - 0xffffffff, /* virt-base */ - 0xffffffff, /* virt-size */ - 0x4000, /* load-base */ -#else - /* values for longtrail CHRP */ - 0, /* real-mode = false */ - 0xffffffff, /* real-base */ - 0xffffffff, /* real-size */ - 0xffffffff, /* virt-base */ - 0xffffffff, /* virt-size */ - 0x00600000, /* load-base */ -#endif -}; - -unsigned char buf[512]; - -#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) -#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) - -#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ - buf[(off) + 1] = (v) & 0xff) -#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ - PUT_16BE((off) + 2, (v))) - -/* Structure of an ELF file */ -#define E_IDENT 0 /* ELF header */ -#define E_PHOFF 28 -#define E_PHENTSIZE 42 -#define E_PHNUM 44 -#define E_HSIZE 52 /* size of ELF header */ - -#define EI_MAGIC 0 /* offsets in E_IDENT area */ -#define EI_CLASS 4 -#define EI_DATA 5 - -#define PH_TYPE 0 /* ELF program header */ -#define PH_OFFSET 4 -#define PH_FILESZ 16 -#define PH_HSIZE 32 /* size of program header */ - -#define PT_NOTE 4 /* Program header type = note */ - -#define ELFCLASS32 1 -#define ELFDATA2MSB 2 - -unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; - -int main(int ac, char **av) -{ - int fd, n, i; - int ph, ps, np; - int nnote, ns; - - if (ac != 2) { - fprintf(stderr, "Usage: %s elf-file\n", av[0]); - exit(1); - } - fd = open(av[1], O_RDWR); - if (fd < 0) { - perror(av[1]); - exit(1); - } - - nnote = strlen(arch) + 1 + (N_DESCR + 3) * 4; - - n = read(fd, buf, sizeof(buf)); - if (n < 0) { - perror("read"); - exit(1); - } - - if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0) - goto notelf; - - if (buf[E_IDENT+EI_CLASS] != ELFCLASS32 - || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) { - fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", - av[1]); - exit(1); - } - - ph = GET_32BE(E_PHOFF); - ps = GET_16BE(E_PHENTSIZE); - np = GET_16BE(E_PHNUM); - if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) - goto notelf; - if (ph + (np + 1) * ps + nnote > n) - goto nospace; - - for (i = 0; i < np; ++i) { - if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { - fprintf(stderr, "%s already has a note entry\n", - av[1]); - exit(0); - } - ph += ps; - } - - /* XXX check that the area we want to use is all zeroes */ - for (i = 0; i < ps + nnote; ++i) - if (buf[ph + i] != 0) - goto nospace; - - /* fill in the program header entry */ - ns = ph + ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote); - - /* fill in the note area we point to */ - /* XXX we should probably make this a proper section */ - PUT_32BE(ns, strlen(arch) + 1); - PUT_32BE(ns + 4, N_DESCR * 4); - PUT_32BE(ns + 8, 0x1275); - strcpy(&buf[ns + 12], arch); - ns += 12 + strlen(arch) + 1; - for (i = 0; i < N_DESCR; ++i) - PUT_32BE(ns + i * 4, descr[i]); - - /* Update the number of program headers */ - PUT_16BE(E_PHNUM, np + 1); - - /* write back */ - lseek(fd, (long) 0, SEEK_SET); - i = write(fd, buf, n); - if (i < 0) { - perror("write"); - exit(1); - } - if (i < n) { - fprintf(stderr, "%s: write truncated\n", av[1]); - exit(1); - } - - exit(0); - - notelf: - fprintf(stderr, "%s does not appear to be an ELF file\n", av[0]); - exit(1); - - nospace: - fprintf(stderr, "sorry, I can't find space in %s to put the note\n", - av[0]); - exit(1); -} diff --git a/arch/ppc/boot/utils/hack-coff.c b/arch/ppc/boot/utils/hack-coff.c deleted file mode 100644 index 5e5a6573a1e..00000000000 --- a/arch/ppc/boot/utils/hack-coff.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * hack-coff.c - hack the header of an xcoff file to fill in - * a few fields needed by the Open Firmware xcoff loader on - * Power Macs but not initialized by objcopy. - * - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <fcntl.h> -#include <string.h> -#include "rs6000.h" - -#define AOUT_MAGIC 0x010b - -#define get_16be(x) ((((unsigned char *)(x))[0] << 8) \ - + ((unsigned char *)(x))[1]) -#define put_16be(x, v) (((unsigned char *)(x))[0] = (v) >> 8, \ - ((unsigned char *)(x))[1] = (v) & 0xff) -#define get_32be(x) ((((unsigned char *)(x))[0] << 24) \ - + (((unsigned char *)(x))[1] << 16) \ - + (((unsigned char *)(x))[2] << 8) \ - + ((unsigned char *)(x))[3]) - -int -main(int ac, char **av) -{ - int fd; - int i, nsect; - int aoutsz; - struct external_filehdr fhdr; - AOUTHDR aout; - struct external_scnhdr shdr; - - if (ac != 2) { - fprintf(stderr, "Usage: hack-coff coff-file\n"); - exit(1); - } - if ((fd = open(av[1], 2)) == -1) { - perror(av[2]); - exit(1); - } - if (read(fd, &fhdr, sizeof(fhdr)) != sizeof(fhdr)) - goto readerr; - i = get_16be(fhdr.f_magic); - if (i != U802TOCMAGIC && i != U802WRMAGIC && i != U802ROMAGIC) { - fprintf(stderr, "%s: not an xcoff file\n", av[1]); - exit(1); - } - aoutsz = get_16be(fhdr.f_opthdr); - if (read(fd, &aout, aoutsz) != aoutsz) - goto readerr; - nsect = get_16be(fhdr.f_nscns); - for (i = 0; i < nsect; ++i) { - if (read(fd, &shdr, sizeof(shdr)) != sizeof(shdr)) - goto readerr; - if (strcmp(shdr.s_name, ".text") == 0) { - put_16be(aout.o_snentry, i+1); - put_16be(aout.o_sntext, i+1); - } else if (strcmp(shdr.s_name, ".data") == 0) { - put_16be(aout.o_sndata, i+1); - } else if (strcmp(shdr.s_name, ".bss") == 0) { - put_16be(aout.o_snbss, i+1); - } - } - put_16be(aout.magic, AOUT_MAGIC); - if (lseek(fd, (long) sizeof(struct external_filehdr), 0) == -1 - || write(fd, &aout, aoutsz) != aoutsz) { - fprintf(stderr, "%s: write error\n", av[1]); - exit(1); - } - close(fd); - exit(0); - -readerr: - fprintf(stderr, "%s: read error or file too short\n", av[1]); - exit(1); -} diff --git a/arch/ppc/boot/utils/mknote.c b/arch/ppc/boot/utils/mknote.c deleted file mode 100644 index b9fbb2cbfc8..00000000000 --- a/arch/ppc/boot/utils/mknote.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) Cort Dougan 1999. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Generate a note section as per the CHRP specification. - * - */ - -#include <stdio.h> -#include <string.h> - -#define PL(x) printf("%c%c%c%c", ((x)>>24)&0xff, ((x)>>16)&0xff, ((x)>>8)&0xff, (x)&0xff ); - -int main(void) -{ -/* header */ - /* namesz */ - PL(strlen("PowerPC")+1); - /* descrsz */ - PL(6*4); - /* type */ - PL(0x1275); - /* name */ - printf("PowerPC"); printf("%c", 0); - -/* descriptor */ - /* real-mode */ - PL(0xffffffff); - /* real-base */ - PL(0x00c00000); - /* real-size */ - PL(0xffffffff); - /* virt-base */ - PL(0xffffffff); - /* virt-size */ - PL(0xffffffff); - /* load-base */ - PL(0x4000); - return 0; -} diff --git a/arch/ppc/configs/ibmchrp_defconfig b/arch/ppc/configs/ibmchrp_defconfig deleted file mode 100644 index 27f3e69c1f9..00000000000 --- a/arch/ppc/configs/ibmchrp_defconfig +++ /dev/null @@ -1,875 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -# CONFIG_STANDALONE is not set -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PROC_DEVICETREE=y -CONFIG_PPC_RTAS=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -CONFIG_ISA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_LBD=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_ADB is not set -# CONFIG_ADB_CUDA is not set -# CONFIG_ADB_PMU is not set -# CONFIG_MAC_FLOPPY is not set -# CONFIG_MAC_SERIAL is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_RAW=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -# CONFIG_SERIAL_PMACZILOG is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S3TRIO is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -# CONFIG_FB_MATROX_G450 is not set -CONFIG_FB_MATROX_G100A=y -CONFIG_FB_MATROX_G100=y -# CONFIG_FB_MATROX_MULTIHEAD is not set -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=y -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_EXPORTFS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Library routines -# -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_BOOTX_TEXT is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/pmac_defconfig b/arch/ppc/configs/pmac_defconfig deleted file mode 100644 index a2db8b541c9..00000000000 --- a/arch/ppc/configs/pmac_defconfig +++ /dev/null @@ -1,1591 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc3 -# Wed Jul 13 14:13:13 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -CONFIG_PPC_FPU=y -CONFIG_ALTIVEC=y -CONFIG_TAU=y -# CONFIG_TAU_INT is not set -# CONFIG_TAU_AVERAGE is not set -# CONFIG_KEXEC is not set -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PMAC=y -CONFIG_PPC601_SYNC_FIX=y -CONFIG_PM=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_KATANA is not set -# CONFIG_WILLOW is not set -# CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_CHESTNUT is not set -# CONFIG_SPRUCE is not set -# CONFIG_HDPU is not set -# CONFIG_EV64260 is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBC82xx is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX8260 is not set -# CONFIG_TQM8260 is not set -# CONFIG_ADS8272 is not set -# CONFIG_PQ2FADS is not set -# CONFIG_LITE5200 is not set -# CONFIG_MPC834x_SYS is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -# CONFIG_SMP is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PROC_DEVICETREE=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM_DEBUG is not set -CONFIG_SOFTWARE_SUSPEND=y -CONFIG_PM_STD_PARTITION="" -# CONFIG_SECCOMP is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_ISA is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -# CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_PCMCIA_IOCTL is not set -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -# CONFIG_PD6729 is not set -# CONFIG_I82092 is not set -# CONFIG_TCIC is not set -CONFIG_PCCARD_NONSTATIC=m - -# -# Advanced setup -# -CONFIG_ADVANCED_OPTIONS=y -CONFIG_HIGHMEM_START=0xfe000000 -# CONFIG_LOWMEM_SIZE_BOOL is not set -CONFIG_LOWMEM_SIZE=0x30000000 -# CONFIG_KERNEL_START_BOOL is not set -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE_BOOL=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -# CONFIG_NSC_FIR is not set -# CONFIG_WINBOND_FIR is not set -# CONFIG_TOSHIBA_FIR is not set -# CONFIG_SMC_IRCC_FIR is not set -# CONFIG_ALI_FIR is not set -# CONFIG_VLSI_FIR is not set -# CONFIG_VIA_FIR is not set -# CONFIG_BT is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -CONFIG_MAC_FLOPPY=m -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_LBD=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=y -CONFIG_BLK_DEV_IDESCSI=y -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_BLINK=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -CONFIG_SCSI_MESH=y -CONFIG_SCSI_MESH_SYNC_RATE=5 -CONFIG_SCSI_MESH_RESET_DELAY_MS=1000 -CONFIG_SCSI_MAC53C94=y - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=m - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# -# CONFIG_IEEE1394_PCILYNX is not set -CONFIG_IEEE1394_OHCI1394=m - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_PMAC_APM_EMU=y -CONFIG_PMAC_MEDIABAY=y -CONFIG_PMAC_BACKLIGHT=y -CONFIG_ADB_MACIO=y -CONFIG_INPUT_ADBHID=y -CONFIG_MAC_EMUMOUSEBTN=y -CONFIG_THERM_WINDTUNNEL=m -CONFIG_THERM_ADT746X=m -# CONFIG_ANSLCD is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACE=y -# CONFIG_MACE_AAUI_PORT is not set -CONFIG_BMAC=y -# CONFIG_HAPPYMEAL is not set -CONFIG_SUNGEM=y -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -CONFIG_APPLE_AIRPORT=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_AGP_UNINORTH=m -CONFIG_DRM=m -# CONFIG_DRM_TDFX is not set -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_DRM_VIA is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_HYDRA is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_KEYWEST=m -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -CONFIG_FB_CONTROL=y -CONFIG_FB_PLATINUM=y -CONFIG_FB_VALKYRIE=y -CONFIG_FB_CT65550=y -# CONFIG_FB_ASILIANT is not set -CONFIG_FB_IMSTT=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -# CONFIG_FB_MATROX_MULTIHEAD is not set -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=y -CONFIG_FB_ATY=y -CONFIG_FB_ATY_CT=y -CONFIG_FB_ATY_GENERIC_LCD=y -# CONFIG_FB_ATY_XL_INIT is not set -CONFIG_FB_ATY_GX=y -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=y -CONFIG_FB_3DFX_ACCEL=y -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_DEVICE=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_DMASOUND_PMAC=m -CONFIG_DMASOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_DUMMY=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCI devices -# -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set - -# -# ALSA PowerMac devices -# -CONFIG_SND_POWERMAC=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_USX2Y=m - -# -# PCMCIA devices -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -CONFIG_USB_SERIAL_VISOR=m -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y -CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_XMON is not set -# CONFIG_BDI_SWITCH is not set -CONFIG_BOOTX_TEXT=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/power3_defconfig b/arch/ppc/configs/power3_defconfig deleted file mode 100644 index a1ef929bca5..00000000000 --- a/arch/ppc/configs/power3_defconfig +++ /dev/null @@ -1,1035 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -# CONFIG_STANDALONE is not set - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_HOTPLUG is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -CONFIG_POWER3=y -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_CPU_FREQ is not set -CONFIG_PPC64BRIDGE=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -CONFIG_SMP=y -# CONFIG_IRQ_ALL_CPUS is not set -CONFIG_NR_CPUS=32 -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PROC_DEVICETREE=y -CONFIG_PPC_RTAS=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -CONFIG_ISA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y - -# -# Advanced setup -# -CONFIG_ADVANCED_OPTIONS=y -# CONFIG_HIGHMEM_START_BOOL is not set -CONFIG_HIGHMEM_START=0xfe000000 -# CONFIG_LOWMEM_SIZE_BOOL is not set -CONFIG_LOWMEM_SIZE=0x30000000 -# CONFIG_KERNEL_START_BOOL is not set -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE_BOOL=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_LBD=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C406A is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=y -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_ADB is not set -# CONFIG_ADB_CUDA is not set -# CONFIG_ADB_PMU is not set -# CONFIG_MAC_FLOPPY is not set -# CONFIG_MAC_SERIAL is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_E100_NAPI is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -CONFIG_GAMEPORT=m -CONFIG_SOUND_GAMEPORT=m -# CONFIG_GAMEPORT_NS558 is not set -# CONFIG_GAMEPORT_L4 is not set -# CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set -# CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461x is not set -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=y - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_HYDRA is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_KEYWEST is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S3TRIO is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -# CONFIG_FB_MATROX_G450 is not set -CONFIG_FB_MATROX_G100A=y -CONFIG_FB_MATROX_G100=y -CONFIG_FB_MATROX_I2C=y -# CONFIG_FB_MATROX_MAVEN is not set -CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=y -# CONFIG_DMASOUND_PMAC is not set - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_DUMMY=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ISA devices -# -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_CS4231 is not set -CONFIG_SND_CS4232=m -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_WAVEFRONT is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_SGALAXY is not set -# CONFIG_SND_SSCAPE is not set - -# -# PCI devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -CONFIG_SND_CS46XX=m -# CONFIG_SND_CS46XX_NEW_DSP is not set -CONFIG_SND_CS4281=m -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VX222 is not set - -# -# ALSA PowerMac devices -# -# CONFIG_SND_POWERMAC is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Library routines -# -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -CONFIG_BOOTX_TEXT=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_SERPENT is not set -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set diff --git a/arch/ppc/configs/common_defconfig b/arch/ppc/configs/prep_defconfig index 4d33bee23a8..4d33bee23a8 100644 --- a/arch/ppc/configs/common_defconfig +++ b/arch/ppc/configs/prep_defconfig diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index e399bbb969a..466437f4bcb 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -1,48 +1,24 @@ # # Makefile for the linux kernel. # -ifneq ($(CONFIG_PPC_MERGE),y) - extra-$(CONFIG_PPC_STD_MMU) := head.o extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o -extra-$(CONFIG_6xx) += idle_6xx.o extra-y += vmlinux.lds -obj-y := entry.o traps.o idle.o time.o misc.o \ +obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o -obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o -obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o -obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o +obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o -obj-$(CONFIG_TAU) += temp.o -ifndef CONFIG_E200 -obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o -endif obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o ifndef CONFIG_MATH_EMULATION obj-$(CONFIG_8xx) += softemu8xx.o endif - -# These are here while we do the architecture merge - -else -obj-y := idle.o -obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o -obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o -obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o -obj-$(CONFIG_KGDB) += ppc-stub.o -obj-$(CONFIG_TAU) += temp.o -ifndef CONFIG_E200 -obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o -endif -endif diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 3a281597848..5891ecbdc70 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -135,10 +135,10 @@ transfer_to_handler: mfspr r11,SPRN_HID0 mtcr r11 BEGIN_FTR_SECTION - bt- 8,power_save_6xx_restore /* Check DOZE */ + bt- 8,4f /* Check DOZE */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) BEGIN_FTR_SECTION - bt- 9,power_save_6xx_restore /* Check NAP */ + bt- 9,4f /* Check NAP */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont @@ -157,6 +157,10 @@ transfer_to_handler_cont: SYNC RFI /* jump to handler, enable MMU */ +#ifdef CONFIG_6xx +4: b power_save_6xx_restore +#endif + /* * On kernel stack overflow, load up an initial stack pointer * and call StackOverflow(regs), which should not return. @@ -926,55 +930,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) b 4b .comm ee_restarts,4 - -/* - * PROM code for specific machines follows. Put it - * here so it's easy to add arch-specific sections later. - * -- Cort - */ -#ifdef CONFIG_PPC_OF -/* - * On CHRP, the Run-Time Abstraction Services (RTAS) have to be - * called with the MMU off. - */ -_GLOBAL(enter_rtas) - stwu r1,-INT_FRAME_SIZE(r1) - mflr r0 - stw r0,INT_FRAME_SIZE+4(r1) - lis r4,rtas_data@ha - lwz r4,rtas_data@l(r4) - lis r6,1f@ha /* physical return address for rtas */ - addi r6,r6,1f@l - tophys(r6,r6) - tophys(r7,r1) - lis r8,rtas_entry@ha - lwz r8,rtas_entry@l(r8) - mfmsr r9 - stw r9,8(r1) - LOAD_MSR_KERNEL(r0,MSR_KERNEL) - SYNC /* disable interrupts so SRR0/1 */ - MTMSRD(r0) /* don't get trashed */ - li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR) - mtlr r6 - CLR_TOP32(r7) - mtspr SPRN_SPRG2,r7 - mtspr SPRN_SRR0,r8 - mtspr SPRN_SRR1,r9 - RFI -1: tophys(r9,r1) - lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */ - lwz r9,8(r9) /* original msr value */ - FIX_SRR1(r9,r0) - addi r1,r1,INT_FRAME_SIZE - li r0,0 - mtspr SPRN_SPRG2,r0 - mtspr SPRN_SRR0,r8 - mtspr SPRN_SRR1,r9 - RFI /* return to caller */ - - .globl machine_check_in_rtas -machine_check_in_rtas: - twi 31,0,0 - /* XXX load up BATs and panic */ - -#endif /* CONFIG_PPC_OF */ diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index 53ea845fb91..01303efedda 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -37,19 +37,6 @@ #include <asm/amigappc.h> #endif -#ifdef CONFIG_PPC64BRIDGE -#define LOAD_BAT(n, reg, RA, RB) \ - ld RA,(n*32)+0(reg); \ - ld RB,(n*32)+8(reg); \ - mtspr SPRN_IBAT##n##U,RA; \ - mtspr SPRN_IBAT##n##L,RB; \ - ld RA,(n*32)+16(reg); \ - ld RB,(n*32)+24(reg); \ - mtspr SPRN_DBAT##n##U,RA; \ - mtspr SPRN_DBAT##n##L,RB; \ - -#else /* CONFIG_PPC64BRIDGE */ - /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ /* see the comment for clear_bats() -- Cort */ \ @@ -66,7 +53,6 @@ mtspr SPRN_DBAT##n##U,RA; \ mtspr SPRN_DBAT##n##L,RB; \ 1: -#endif /* CONFIG_PPC64BRIDGE */ .text .stabs "arch/ppc/kernel/",N_SO,0,0,0f @@ -129,11 +115,6 @@ _start: .globl __start __start: -/* - * We have to do any OF calls before we map ourselves to KERNELBASE, - * because OF may have I/O devices mapped into that area - * (particularly on CHRP). - */ mr r31,r3 /* save parameters */ mr r30,r4 mr r29,r5 @@ -148,14 +129,6 @@ __start: */ bl early_init -/* - * On POWER4, we first need to tweak some CPU configuration registers - * like real mode cache inhibit or exception base - */ -#ifdef CONFIG_POWER4 - bl __970_cpu_preinit -#endif /* CONFIG_POWER4 */ - #ifdef CONFIG_APUS /* On APUS the __va/__pa constants need to be set to the correct * values before continuing. @@ -169,7 +142,6 @@ __start: */ bl mmu_off __after_mmu_off: -#ifndef CONFIG_POWER4 bl clear_bats bl flush_tlbs @@ -177,10 +149,6 @@ __after_mmu_off: #if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) bl setup_disp_bat #endif -#else /* CONFIG_POWER4 */ - bl reloc_offset - bl initial_mm_power4 -#endif /* CONFIG_POWER4 */ /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -192,18 +160,11 @@ __after_mmu_off: bl reloc_offset bl init_idle_6xx #endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 - bl reloc_offset - bl init_idle_power4 -#endif /* CONFIG_POWER4 */ #ifndef CONFIG_APUS /* * We need to run with _start at physical address 0. - * On CHRP, we are loaded at 0x10000 since OF on CHRP uses - * the exception vectors at 0 (and therefore this copy - * overwrites OF's exception vectors with our own). * If the MMU is already turned on, we copy stuff to KERNELBASE, * otherwise we copy it to 0. */ @@ -358,51 +319,19 @@ i##n: \ #endif /* Machine check */ -/* - * On CHRP, this is complicated by the fact that we could get a - * machine check inside RTAS, and we have no guarantee that certain - * critical registers will have the values we expect. The set of - * registers that might have bad values includes all the GPRs - * and all the BATs. We indicate that we are in RTAS by putting - * a non-zero value, the address of the exception frame to use, - * in SPRG2. The machine check handler checks SPRG2 and uses its - * value if it is non-zero. If we ever needed to free up SPRG2, - * we could use a field in the thread_info or thread_struct instead. - * (Other exception handlers assume that r1 is a valid kernel stack - * pointer when we take an exception from supervisor mode.) - * -- paulus. - */ . = 0x200 mtspr SPRN_SPRG0,r10 mtspr SPRN_SPRG1,r11 mfcr r10 -#ifdef CONFIG_PPC_CHRP - mfspr r11,SPRN_SPRG2 - cmpwi 0,r11,0 - bne 7f -#endif /* CONFIG_PPC_CHRP */ EXCEPTION_PROLOG_1 7: EXCEPTION_PROLOG_2 addi r3,r1,STACK_FRAME_OVERHEAD -#ifdef CONFIG_PPC_CHRP - mfspr r4,SPRN_SPRG2 - cmpwi cr1,r4,0 - bne cr1,1f -#endif EXC_XFER_STD(0x200, machine_check_exception) -#ifdef CONFIG_PPC_CHRP -1: b machine_check_in_rtas -#endif /* Data access exception. */ . = 0x300 -#ifdef CONFIG_PPC64BRIDGE - b DataAccess -DataAccessCont: -#else DataAccess: EXCEPTION_PROLOG -#endif /* CONFIG_PPC64BRIDGE */ mfspr r10,SPRN_DSISR andis. r0,r10,0xa470 /* weird error? */ bne 1f /* if not, try to put a PTE */ @@ -414,21 +343,10 @@ DataAccess: mfspr r4,SPRN_DAR EXC_XFER_EE_LITE(0x300, handle_page_fault) -#ifdef CONFIG_PPC64BRIDGE -/* SLB fault on data access. */ - . = 0x380 - b DataSegment -#endif /* CONFIG_PPC64BRIDGE */ - /* Instruction access exception. */ . = 0x400 -#ifdef CONFIG_PPC64BRIDGE - b InstructionAccess -InstructionAccessCont: -#else InstructionAccess: EXCEPTION_PROLOG -#endif /* CONFIG_PPC64BRIDGE */ andis. r0,r9,0x4000 /* no pte found? */ beq 1f /* if so, try to put a PTE */ li r3,0 /* into the hash table */ @@ -438,12 +356,6 @@ InstructionAccess: mr r5,r9 EXC_XFER_EE_LITE(0x400, handle_page_fault) -#ifdef CONFIG_PPC64BRIDGE -/* SLB fault on instruction access. */ - . = 0x480 - b InstructionSegment -#endif /* CONFIG_PPC64BRIDGE */ - /* External interrupt */ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) @@ -708,15 +620,9 @@ DataStoreTLBMiss: EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE) EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE) EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) -#ifdef CONFIG_POWER4 - EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1700, Trap_17, altivec_assist_exception, EXC_XFER_EE) - EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD) -#else /* !CONFIG_POWER4 */ EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE) EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD) EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) -#endif /* CONFIG_POWER4 */ EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE) @@ -754,28 +660,6 @@ AltiVecUnavailable: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) -#ifdef CONFIG_PPC64BRIDGE -DataAccess: - EXCEPTION_PROLOG - b DataAccessCont - -InstructionAccess: - EXCEPTION_PROLOG - b InstructionAccessCont - -DataSegment: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - mfspr r4,SPRN_DAR - stw r4,_DAR(r11) - EXC_XFER_STD(0x380, unknown_exception) - -InstructionSegment: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_STD(0x480, unknown_exception) -#endif /* CONFIG_PPC64BRIDGE */ - #ifdef CONFIG_ALTIVEC /* Note that the AltiVec support is closely modeled after the FP * support. Changes to one are likely to be applicable to the @@ -1048,13 +932,6 @@ __secondary_start_pmac_0: .globl __secondary_start __secondary_start: -#ifdef CONFIG_PPC64BRIDGE - mfmsr r0 - clrldi r0,r0,1 /* make sure it's in 32-bit mode */ - SYNC - MTMSRD(r0) - isync -#endif /* Copy some CPU settings from CPU 0 */ bl __restore_cpu_setup @@ -1065,10 +942,6 @@ __secondary_start: lis r3,-KERNELBASE@h bl init_idle_6xx #endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 - lis r3,-KERNELBASE@h - bl init_idle_power4 -#endif /* CONFIG_POWER4 */ /* get current_thread_info and current */ lis r1,secondary_ti@ha @@ -1109,12 +982,12 @@ __secondary_start: * Those generic dummy functions are kept for CPUs not * included in CONFIG_6xx */ -#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) +#if !defined(CONFIG_6xx) _GLOBAL(__save_cpu_setup) blr _GLOBAL(__restore_cpu_setup) blr -#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */ +#endif /* !defined(CONFIG_6xx) */ /* @@ -1132,11 +1005,6 @@ load_up_mmu: tophys(r6,r6) lwz r6,_SDR1@l(r6) mtspr SPRN_SDR1,r6 -#ifdef CONFIG_PPC64BRIDGE - /* clear the ASR so we only use the pseudo-segment registers. */ - li r6,0 - mtasr r6 -#endif /* CONFIG_PPC64BRIDGE */ li r0,16 /* load up segment register values */ mtctr r0 /* for context 0 */ lis r3,0x2000 /* Ku = 1, VSID = 0 */ @@ -1145,7 +1013,7 @@ load_up_mmu: addi r3,r3,0x111 /* increment VSID */ addis r4,r4,0x1000 /* address of next segment */ bdnz 3b -#ifndef CONFIG_POWER4 + /* Load the BAT registers with the values set up by MMU_init. MMU_init takes care of whether we're on a 601 or not. */ mfpvr r3 @@ -1158,7 +1026,7 @@ load_up_mmu: LOAD_BAT(1,r3,r4,r5) LOAD_BAT(2,r3,r4,r5) LOAD_BAT(3,r3,r4,r5) -#endif /* CONFIG_POWER4 */ + blr /* @@ -1269,9 +1137,6 @@ _GLOBAL(set_context) li r4,0 isync 3: -#ifdef CONFIG_PPC64BRIDGE - slbie r4 -#endif /* CONFIG_PPC64BRIDGE */ mtsrin r3,r4 addi r3,r3,0x111 /* next VSID */ rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */ @@ -1358,7 +1223,6 @@ mmu_off: sync RFI -#ifndef CONFIG_POWER4 /* * Use the first pair of BAT registers to map the 1st 16MB * of RAM to KERNELBASE. From this point on we can't safely @@ -1366,7 +1230,6 @@ mmu_off: */ initial_bats: lis r11,KERNELBASE@h -#ifndef CONFIG_PPC64BRIDGE mfspr r9,SPRN_PVR rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ cmpwi 0,r9,1 @@ -1381,7 +1244,6 @@ initial_bats: mtspr SPRN_IBAT1L,r10 isync blr -#endif /* CONFIG_PPC64BRIDGE */ 4: tophys(r8,r11) #ifdef CONFIG_SMP @@ -1395,11 +1257,6 @@ initial_bats: ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */ #endif /* CONFIG_APUS */ -#ifdef CONFIG_PPC64BRIDGE - /* clear out the high 32 bits in the BAT */ - clrldi r11,r11,32 - clrldi r8,r8,32 -#endif /* CONFIG_PPC64BRIDGE */ mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */ mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */ mtspr SPRN_IBAT0L,r8 @@ -1432,38 +1289,6 @@ setup_disp_bat: #endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */ -#else /* CONFIG_POWER4 */ -/* - * Load up the SDR1 and segment register values now - * since we don't have the BATs. - * Also make sure we are running in 32-bit mode. - */ - -initial_mm_power4: - addis r14,r3,_SDR1@ha /* get the value from _SDR1 */ - lwz r14,_SDR1@l(r14) /* assume hash table below 4GB */ - mtspr SPRN_SDR1,r14 - slbia - lis r4,0x2000 /* set pseudo-segment reg 12 */ - ori r5,r4,0x0ccc - mtsr 12,r5 -#if 0 - ori r5,r4,0x0888 /* set pseudo-segment reg 8 */ - mtsr 8,r5 /* (for access to serial port) */ -#endif -#ifdef CONFIG_BOOTX_TEXT - ori r5,r4,0x0999 /* set pseudo-segment reg 9 */ - mtsr 9,r5 /* (for access to screen) */ -#endif - mfmsr r0 - clrldi r0,r0,1 - sync - mtmsr r0 - isync - blr - -#endif /* CONFIG_POWER4 */ - #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c deleted file mode 100644 index 1be3ca5bae4..00000000000 --- a/arch/ppc/kernel/idle.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Idle daemon for PowerPC. Idle daemon will handle any action - * that needs to be taken when the system becomes idle. - * - * Written by Cort Dougan (cort@cs.nmt.edu). Subsequently hacked - * on by Tom Rini, Armin Kuster, Paul Mackerras and others. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/sysctl.h> -#include <linux/cpu.h> - -#include <asm/pgtable.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/cputable.h> -#include <asm/machdep.h> -#include <asm/smp.h> - -void default_idle(void) -{ - void (*powersave)(void); - - powersave = ppc_md.power_save; - - if (!need_resched()) { - if (powersave != NULL) - powersave(); -#ifdef CONFIG_SMP - else { - set_thread_flag(TIF_POLLING_NRFLAG); - while (!need_resched() && - !cpu_is_offline(smp_processor_id())) - barrier(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } -#endif - } -} - -/* - * The body of the idle task. - */ -void cpu_idle(void) -{ - int cpu = smp_processor_id(); - - for (;;) { - while (!need_resched()) { - if (ppc_md.idle != NULL) - ppc_md.idle(); - else - default_idle(); - } - - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx) -/* - * Register the sysctl to set/clear powersave_nap. - */ -extern int powersave_nap; - -static ctl_table powersave_nap_ctl_table[]={ - { - .ctl_name = KERN_PPC_POWERSAVE_NAP, - .procname = "powersave-nap", - .data = &powersave_nap, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, - { 0, }, -}; -static ctl_table powersave_nap_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, - { 0,}, -}; - -static int __init -register_powersave_nap_sysctl(void) -{ - register_sysctl_table(powersave_nap_sysctl_root, 0); - - return 0; -} - -__initcall(register_powersave_nap_sysctl); -#endif diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S deleted file mode 100644 index 1a2194cf682..00000000000 --- a/arch/ppc/kernel/idle_6xx.S +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * Make sure no rest of NAP mode remains in HID0, save default - * values for some CPU specific registers. Called with r24 - * containing CPU number and r3 reloc offset - */ -_GLOBAL(init_idle_6xx) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID0 - rlwinm r4,r4,0,10,8 /* Clear NAP */ - mtspr SPRN_HID0, r4 - b 1f -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - blr -1: - slwi r5,r24,2 - add r5,r5,r3 -BEGIN_FTR_SECTION - mfspr r4,SPRN_MSSCR0 - addis r6,r5, nap_save_msscr0@ha - stw r4,nap_save_msscr0@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID1 - addis r6,r5,nap_save_hid1@ha - stw r4,nap_save_hid1@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ -_GLOBAL(ppc6xx_idle) - /* Check if we can nap or doze, put HID0 mask in r3 - */ - lis r3, 0 -BEGIN_FTR_SECTION - lis r3,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) -BEGIN_FTR_SECTION - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beq 1f - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beq 1f - lis r3,HID0_NAP@h -1: -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - cmpwi 0,r3,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Some pre-nap cleanups needed on some CPUs */ - andis. r0,r3,HID0_NAP@h - beq 2f -BEGIN_FTR_SECTION - /* Disable L2 prefetch on some 745x and try to ensure - * L2 prefetch engines are idle. As explained by errata - * text, we can't be sure they are, we just hope very hard - * that well be enough (sic !). At least I noticed Apple - * doesn't even bother doing the dcbf's here... - */ - mfspr r4,SPRN_MSSCR0 - rlwinm r4,r4,0,0,29 - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lis r4,KERNELBASE@h - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -#ifdef DEBUG - lis r6,nap_enter_count@ha - lwz r4,nap_enter_count@l(r6) - addi r4,r4,1 - stw r4,nap_enter_count@l(r6) -#endif -2: -BEGIN_FTR_SECTION - /* Go to low speed mode on some 750FX */ - lis r4,powersave_lowspeed@ha - lwz r4,powersave_lowspeed@l(r4) - cmpwi 0,r4,0 - beq 1f - mfspr r4,SPRN_HID1 - oris r4,r4,0x0001 - mtspr SPRN_HID1,r4 -1: -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - - /* Go to NAP or DOZE now */ - mfspr r4,SPRN_HID0 - lis r5,(HID0_NAP|HID0_SLEEP)@h -BEGIN_FTR_SECTION - oris r5,r5,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - andc r4,r4,r5 - or r4,r4,r3 -BEGIN_FTR_SECTION - oris r4,r4,HID0_DPM@h /* that should be done once for all */ -END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM) - mtspr SPRN_HID0,r4 -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - -/* - * Return from NAP/DOZE mode, restore some CPU specific registers, - * we are called with DR/IR still off and r2 containing physical - * address of current. - */ -_GLOBAL(power_save_6xx_restore) - mfspr r11,SPRN_HID0 - rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */ - cror 4*cr1+eq,4*cr0+eq,4*cr0+eq -BEGIN_FTR_SECTION - rlwinm r11,r11,0,9,7 /* Clear DOZE */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - mtspr SPRN_HID0, r11 - -#ifdef DEBUG - beq cr1,1f - lis r11,(nap_return_count-KERNELBASE)@ha - lwz r9,nap_return_count@l(r11) - addi r9,r9,1 - stw r9,nap_return_count@l(r11) -1: -#endif - - rlwinm r9,r1,0,0,18 - tophys(r9,r9) - lwz r11,TI_CPU(r9) - slwi r11,r11,2 - /* Todo make sure all these are in the same page - * and load r22 (@ha part + CPU offset) only once - */ -BEGIN_FTR_SECTION - beq cr1,1f - addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha - lwz r9,nap_save_msscr0@l(r9) - mtspr SPRN_MSSCR0, r9 - sync - isync -1: -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - addis r9,r11,(nap_save_hid1-KERNELBASE)@ha - lwz r9,nap_save_hid1@l(r9) - mtspr SPRN_HID1, r9 -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - b transfer_to_handler_cont - - .data - -_GLOBAL(nap_save_msscr0) - .space 4*NR_CPUS - -_GLOBAL(nap_save_hid1) - .space 4*NR_CPUS - -_GLOBAL(powersave_nap) - .long 0 -_GLOBAL(powersave_lowspeed) - .long 0 - -#ifdef DEBUG -_GLOBAL(nap_enter_count) - .space 4 -_GLOBAL(nap_return_count) - .space 4 -#endif diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S deleted file mode 100644 index cc0d535365c..00000000000 --- a/arch/ppc/kernel/idle_power4.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * So nothing for now. Called with r24 containing CPU number and r3 - * reloc offset - */ - .globl init_idle_power4 -init_idle_power4: - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ - .globl power4_idle -power4_idle: -BEGIN_FTR_SECTION - blr -END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beqlr - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Go to NAP now */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - - .globl powersave_nap -powersave_nap: - .long 0 diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 04d04c5bfdd..809673a36f7 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -46,9 +46,6 @@ static void pcibios_fixup_resources(struct pci_dev* dev); static void fixup_broken_pcnet32(struct pci_dev* dev); static int reparent_resources(struct resource *parent, struct resource *res); static void fixup_cpc710_pci64(struct pci_dev* dev); -#ifdef CONFIG_PPC_OF -static u8* pci_to_OF_bus_map; -#endif /* By default, we don't re-assign bus numbers. */ @@ -625,406 +622,13 @@ pcibios_alloc_controller(void) return hose; } -#ifdef CONFIG_PPC_OF -/* - * Functions below are used on OpenFirmware machines. - */ -static void -make_one_node_map(struct device_node* node, u8 pci_bus) -{ - int *bus_range; - int len; - - if (pci_bus >= pci_bus_count) - return; - bus_range = (int *) get_property(node, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, " - "assuming it starts at 0\n", node->full_name); - pci_to_OF_bus_map[pci_bus] = 0; - } else - pci_to_OF_bus_map[pci_bus] = bus_range[0]; - - for (node=node->child; node != 0;node = node->sibling) { - struct pci_dev* dev; - unsigned int *class_code, *reg; - - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) - continue; - reg = (unsigned int *)get_property(node, "reg", NULL); - if (!reg) - continue; - dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff)); - if (!dev || !dev->subordinate) - continue; - make_one_node_map(node, dev->subordinate->number); - } -} - -void -pcibios_make_OF_bus_map(void) -{ - int i; - struct pci_controller* hose; - u8* of_prop_map; - - pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL); - if (!pci_to_OF_bus_map) { - printk(KERN_ERR "Can't allocate OF bus map !\n"); - return; - } - - /* We fill the bus map with invalid values, that helps - * debugging. - */ - for (i=0; i<pci_bus_count; i++) - pci_to_OF_bus_map[i] = 0xff; - - /* For each hose, we begin searching bridges */ - for(hose=hose_head; hose; hose=hose->next) { - struct device_node* node; - node = (struct device_node *)hose->arch_data; - if (!node) - continue; - make_one_node_map(node, hose->first_busno); - } - of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL); - if (of_prop_map) - memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count); -#ifdef DEBUG - printk("PCI->OF bus map:\n"); - for (i=0; i<pci_bus_count; i++) { - if (pci_to_OF_bus_map[i] == 0xff) - continue; - printk("%d -> %d\n", i, pci_to_OF_bus_map[i]); - } -#endif -} - -typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data); - -static struct device_node* -scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data) -{ - struct device_node* sub_node; - - for (; node != 0;node = node->sibling) { - unsigned int *class_code; - - if (filter(node, data)) - return node; - - /* For PCI<->PCI bridges or CardBus bridges, we go down - * Note: some OFs create a parent node "multifunc-device" as - * a fake root for all functions of a multi-function device, - * we go down them as well. - */ - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) && - strcmp(node->name, "multifunc-device")) - continue; - sub_node = scan_OF_pci_childs(node->child, filter, data); - if (sub_node) - return sub_node; - } - return NULL; -} - -static int -scan_OF_pci_childs_iterator(struct device_node* node, void* data) -{ - unsigned int *reg; - u8* fdata = (u8*)data; - - reg = (unsigned int *) get_property(node, "reg", NULL); - if (reg && ((reg[0] >> 8) & 0xff) == fdata[1] - && ((reg[0] >> 16) & 0xff) == fdata[0]) - return 1; - return 0; -} - -static struct device_node* -scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn) -{ - u8 filter_data[2] = {bus, dev_fn}; - - return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data); -} - -/* - * Scans the OF tree for a device node matching a PCI device - */ -struct device_node * -pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) -{ - struct pci_controller *hose; - struct device_node *node; - int busnr; - - if (!have_of) - return NULL; - - /* Lookup the hose */ - busnr = bus->number; - hose = pci_bus_to_hose(busnr); - if (!hose) - return NULL; - - /* Check it has an OF node associated */ - node = (struct device_node *) hose->arch_data; - if (!node) - return NULL; - - /* Fixup bus number according to what OF think it is. */ - if (pci_to_OF_bus_map) - busnr = pci_to_OF_bus_map[busnr]; - if (busnr == 0xff) - return NULL; - - /* Now, lookup childs of the hose */ - return scan_OF_childs_for_device(node->child, busnr, devfn); -} -EXPORT_SYMBOL(pci_busdev_to_OF_node); - -struct device_node* -pci_device_to_OF_node(struct pci_dev *dev) -{ - return pci_busdev_to_OF_node(dev->bus, dev->devfn); -} -EXPORT_SYMBOL(pci_device_to_OF_node); - -/* This routine is meant to be used early during boot, when the - * PCI bus numbers have not yet been assigned, and you need to - * issue PCI config cycles to an OF device. - * It could also be used to "fix" RTAS config cycles if you want - * to set pci_assign_all_buses to 1 and still use RTAS for PCI - * config cycles. - */ -struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) -{ - if (!have_of) - return NULL; - while(node) { - struct pci_controller* hose; - for (hose=hose_head;hose;hose=hose->next) - if (hose->arch_data == node) - return hose; - node=node->parent; - } - return NULL; -} - -static int -find_OF_pci_device_filter(struct device_node* node, void* data) -{ - return ((void *)node == data); -} - -/* - * Returns the PCI device matching a given OF node - */ -int -pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn) -{ - unsigned int *reg; - struct pci_controller* hose; - struct pci_dev* dev = NULL; - - if (!have_of) - return -ENODEV; - /* Make sure it's really a PCI device */ - hose = pci_find_hose_for_OF_device(node); - if (!hose || !hose->arch_data) - return -ENODEV; - if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child, - find_OF_pci_device_filter, (void *)node)) - return -ENODEV; - reg = (unsigned int *) get_property(node, "reg", NULL); - if (!reg) - return -ENODEV; - *bus = (reg[0] >> 16) & 0xff; - *devfn = ((reg[0] >> 8) & 0xff); - - /* Ok, here we need some tweak. If we have already renumbered - * all busses, we can't rely on the OF bus number any more. - * the pci_to_OF_bus_map is not enough as several PCI busses - * may match the same OF bus number. - */ - if (!pci_to_OF_bus_map) - return 0; - - for_each_pci_dev(dev) - if (pci_to_OF_bus_map[dev->bus->number] == *bus && - dev->devfn == *devfn) { - *bus = dev->bus->number; - pci_dev_put(dev); - return 0; - } - - return -ENODEV; -} -EXPORT_SYMBOL(pci_device_from_OF_node); - -void __init -pci_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int primary) -{ - static unsigned int static_lc_ranges[256] __initdata; - unsigned int *dt_ranges, *lc_ranges, *ranges, *prev; - unsigned int size; - int rlen = 0, orig_rlen; - int memno = 0; - struct resource *res; - int np, na = prom_n_addr_cells(dev); - np = na + 5; - - /* First we try to merge ranges to fix a problem with some pmacs - * that can have more than 3 ranges, fortunately using contiguous - * addresses -- BenH - */ - dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen); - if (!dt_ranges) - return; - /* Sanity check, though hopefully that never happens */ - if (rlen > sizeof(static_lc_ranges)) { - printk(KERN_WARNING "OF ranges property too large !\n"); - rlen = sizeof(static_lc_ranges); - } - lc_ranges = static_lc_ranges; - memcpy(lc_ranges, dt_ranges, rlen); - orig_rlen = rlen; - - /* Let's work on a copy of the "ranges" property instead of damaging - * the device-tree image in memory - */ - ranges = lc_ranges; - prev = NULL; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if (prev) { - if (prev[0] == ranges[0] && prev[1] == ranges[1] && - (prev[2] + prev[na+4]) == ranges[2] && - (prev[na+2] + prev[na+4]) == ranges[na+2]) { - prev[na+4] += ranges[na+4]; - ranges[0] = 0; - ranges += np; - continue; - } - } - prev = ranges; - ranges += np; - } - - /* - * The ranges property is laid out as an array of elements, - * each of which comprises: - * cells 0 - 2: a PCI address - * cells 3 or 3+4: a CPU physical address - * (size depending on dev->n_addr_cells) - * cells 4+5 or 5+6: the size of the range - */ - ranges = lc_ranges; - rlen = orig_rlen; - while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { - res = NULL; - size = ranges[na+4]; - switch ((ranges[0] >> 24) & 0x3) { - case 1: /* I/O space */ - if (ranges[2] != 0) - break; - hose->io_base_phys = ranges[na+2]; - /* limit I/O space to 16MB */ - if (size > 0x01000000) - size = 0x01000000; - hose->io_base_virt = ioremap(ranges[na+2], size); - if (primary) - isa_io_base = (unsigned long) hose->io_base_virt; - res = &hose->io_resource; - res->flags = IORESOURCE_IO; - res->start = ranges[2]; - DBG("PCI: IO 0x%lx -> 0x%lx\n", - res->start, res->start + size - 1); - break; - case 2: /* memory space */ - memno = 0; - if (ranges[1] == 0 && ranges[2] == 0 - && ranges[na+4] <= (16 << 20)) { - /* 1st 16MB, i.e. ISA memory area */ - if (primary) - isa_mem_base = ranges[na+2]; - memno = 1; - } - while (memno < 3 && hose->mem_resources[memno].flags) - ++memno; - if (memno == 0) - hose->pci_mem_offset = ranges[na+2] - ranges[2]; - if (memno < 3) { - res = &hose->mem_resources[memno]; - res->flags = IORESOURCE_MEM; - if(ranges[0] & 0x40000000) - res->flags |= IORESOURCE_PREFETCH; - res->start = ranges[na+2]; - DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno, - res->start, res->start + size - 1); - } - break; - } - if (res != NULL) { - res->name = dev->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; - } - ranges += np; - } -} - -/* We create the "pci-OF-bus-map" property now so it appears in the - * /proc device tree - */ -void __init -pci_create_OF_bus_map(void) -{ - struct property* of_prop; - - of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256); - if (of_prop && find_path_device("/")) { - memset(of_prop, -1, sizeof(struct property) + 256); - of_prop->name = "pci-OF-bus-map"; - of_prop->length = 256; - of_prop->value = (unsigned char *)&of_prop[1]; - prom_add_property(find_path_device("/"), of_prop); - } -} - -static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev; - struct device_node *np; - - pdev = to_pci_dev (dev); - np = pci_device_to_OF_node(pdev); - if (np == NULL || np->full_name == NULL) - return 0; - return sprintf(buf, "%s", np->full_name); -} -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); - -#else /* CONFIG_PPC_OF */ void pcibios_make_OF_bus_map(void) { } -#endif /* CONFIG_PPC_OF */ /* Add sysfs properties */ void pcibios_add_platform_entries(struct pci_dev *pdev) { -#ifdef CONFIG_PPC_OF - device_create_file(&pdev->dev, &dev_attr_devspec); -#endif /* CONFIG_PPC_OF */ } diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c index 2f5c7650274..75c64504374 100644 --- a/arch/ppc/kernel/ppc_htab.c +++ b/arch/ppc/kernel/ppc_htab.c @@ -52,7 +52,7 @@ static int ppc_htab_open(struct inode *inode, struct file *file) return single_open(file, ppc_htab_show, NULL); } -struct file_operations ppc_htab_operations = { +const struct file_operations ppc_htab_operations = { .open = ppc_htab_open, .read = seq_read, .llseek = seq_lseek, @@ -104,7 +104,7 @@ static char *pmc2_lookup(unsigned long mmcr0) static int ppc_htab_show(struct seq_file *m, void *v) { unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0; -#if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE) +#if defined(CONFIG_PPC_STD_MMU) unsigned int kptes = 0, uptes = 0; PTE *ptr; #endif /* CONFIG_PPC_STD_MMU */ @@ -133,7 +133,6 @@ static int ppc_htab_show(struct seq_file *m, void *v) return 0; } -#ifndef CONFIG_PPC64BRIDGE for (ptr = Hash; ptr < Hash_end; ptr++) { unsigned int mctx, vsid; @@ -147,7 +146,6 @@ static int ppc_htab_show(struct seq_file *m, void *v) else uptes++; } -#endif seq_printf(m, "PTE Hash Table Information\n" @@ -155,20 +153,16 @@ static int ppc_htab_show(struct seq_file *m, void *v) "Buckets\t\t: %lu\n" "Address\t\t: %08lx\n" "Entries\t\t: %lu\n" -#ifndef CONFIG_PPC64BRIDGE "User ptes\t: %u\n" "Kernel ptes\t: %u\n" "Percent full\t: %lu%%\n" -#endif , (unsigned long)(Hash_size>>10), (Hash_size/(sizeof(PTE)*8)), (unsigned long)Hash, Hash_size/sizeof(PTE) -#ifndef CONFIG_PPC64BRIDGE , uptes, kptes, ((kptes+uptes)*100) / (Hash_size/sizeof(PTE)) -#endif ); seq_printf(m, diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 82adb460134..865ba74991a 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -18,7 +18,6 @@ #include <linux/bitops.h> #include <asm/page.h> -#include <asm/semaphore.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -30,7 +29,6 @@ #include <linux/adb.h> #include <linux/cuda.h> #include <linux/pmu.h> -#include <asm/prom.h> #include <asm/system.h> #include <asm/pci-bridge.h> #include <asm/irq.h> @@ -208,27 +206,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_OF -EXPORT_SYMBOL(find_devices); -EXPORT_SYMBOL(find_type_devices); -EXPORT_SYMBOL(find_compatible_devices); -EXPORT_SYMBOL(find_path_device); -EXPORT_SYMBOL(device_is_compatible); -EXPORT_SYMBOL(machine_is_compatible); -EXPORT_SYMBOL(find_all_nodes); -EXPORT_SYMBOL(get_property); -EXPORT_SYMBOL(request_OF_resource); -EXPORT_SYMBOL(release_OF_resource); -EXPORT_SYMBOL(of_find_node_by_name); -EXPORT_SYMBOL(of_find_node_by_type); -EXPORT_SYMBOL(of_find_compatible_node); -EXPORT_SYMBOL(of_find_node_by_path); -EXPORT_SYMBOL(of_find_all_nodes); -EXPORT_SYMBOL(of_get_parent); -EXPORT_SYMBOL(of_get_next_child); -EXPORT_SYMBOL(of_node_get); -EXPORT_SYMBOL(of_node_put); -#endif /* CONFIG_PPC_OF */ #if defined(CONFIG_BOOTX_TEXT) EXPORT_SYMBOL(btext_update_display); #endif @@ -262,9 +239,6 @@ EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(xmon); EXPORT_SYMBOL(xmon_printf); #endif -EXPORT_SYMBOL(__up); -EXPORT_SYMBOL(__down); -EXPORT_SYMBOL(__down_interruptible); #if defined(CONFIG_KGDB) || defined(CONFIG_XMON) extern void (*debugger)(struct pt_regs *regs); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 53e9deacee8..1f79e84ab46 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -1,5 +1,5 @@ /* - * Common prep/chrp boot and setup code. + * Common prep boot and setup code. */ #include <linux/config.h> @@ -72,17 +72,12 @@ unsigned long ISA_DMA_THRESHOLD; unsigned int DMA_MODE_READ; unsigned int DMA_MODE_WRITE; -#ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; -EXPORT_SYMBOL(_machine); - +#ifdef CONFIG_PPC_PREP extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void chrp_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); dev_t boot_dev; -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_PPC_PREP */ int have_of; EXPORT_SYMBOL(have_of); @@ -319,72 +314,12 @@ early_init(int r3, int r4, int r5) identify_cpu(offset, 0); do_cpu_ftr_fixups(offset); -#if defined(CONFIG_PPC_OF) - reloc_got2(offset); - - /* - * don't do anything on prep - * for now, don't use bootinfo because it breaks yaboot 0.5 - * and assume that if we didn't find a magic number, we have OF - */ - if (*(unsigned long *)(0) != 0xdeadc0de) - phys = prom_init(r3, r4, (prom_entry)r5); - - reloc_got2(-offset); -#endif - return phys; } -#ifdef CONFIG_PPC_OF -/* - * Assume here that all clock rates are the same in a - * smp system. -- Cort - */ -int -of_show_percpuinfo(struct seq_file *m, int i) -{ - struct device_node *cpu_node; - u32 *fp; - int s; - - cpu_node = find_type_devices("cpu"); - if (!cpu_node) - return 0; - for (s = 0; s < i && cpu_node->next; s++) - cpu_node = cpu_node->next; - fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL); - if (fp) - seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000); - return 0; -} - -void __init -intuit_machine_type(void) -{ - char *model; - struct device_node *root; - - /* ask the OF info if we're a chrp or pmac */ - root = find_path_device("/"); - if (root != 0) { - /* assume pmac unless proven to be chrp -- Cort */ - _machine = _MACH_Pmac; - model = get_property(root, "device_type", NULL); - if (model && !strncmp("chrp", model, 4)) - _machine = _MACH_chrp; - else { - model = get_property(root, "model", NULL); - if (model && !strncmp(model, "IBM", 3)) - _machine = _MACH_chrp; - } - } -} -#endif - -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP /* - * The PPC_MULTIPLATFORM version of platform_init... + * The PPC_PREP version of platform_init... */ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, @@ -399,161 +334,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, parse_bootinfo(find_bootinfo()); - /* if we didn't get any bootinfo telling us what we are... */ - if (_machine == 0) { - /* prep boot loader tells us if we're prep or not */ - if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) ) - _machine = _MACH_prep; - } - -#ifdef CONFIG_PPC_PREP - /* not much more to do here, if prep */ - if (_machine == _MACH_prep) { - prep_init(r3, r4, r5, r6, r7); - return; - } -#endif - -#ifdef CONFIG_PPC_OF - have_of = 1; - - /* prom_init has already been called from __start */ - if (boot_infos) - relocate_nodes(); - - /* If we aren't PReP, we can find out if we're Pmac - * or CHRP with this. */ - if (_machine == 0) - intuit_machine_type(); - - /* finish_device_tree may need _machine defined. */ - finish_device_tree(); - - /* - * If we were booted via quik, r3 points to the physical - * address of the command-line parameters. - * If we were booted from an xcoff image (i.e. netbooted or - * booted from floppy), we get the command line from the - * bootargs property of the /chosen node. - * If an initial ramdisk is present, r3 and r4 - * are used for initrd_start and initrd_size, - * otherwise they contain 0xdeadbeef. - */ - if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) { - strlcpy(cmd_line, (char *)r3 + KERNELBASE, - sizeof(cmd_line)); - } else if (boot_infos != 0) { - /* booted by BootX - check for ramdisk */ - if (boot_infos->kernelParamsOffset != 0) - strlcpy(cmd_line, (char *) boot_infos - + boot_infos->kernelParamsOffset, - sizeof(cmd_line)); -#ifdef CONFIG_BLK_DEV_INITRD - if (boot_infos->ramDisk) { - initrd_start = (unsigned long) boot_infos - + boot_infos->ramDisk; - initrd_end = initrd_start + boot_infos->ramDiskSize; - initrd_below_start_ok = 1; - } -#endif - } else { - struct device_node *chosen; - char *p; - -#ifdef CONFIG_BLK_DEV_INITRD - if (r3 && r4 && r4 != 0xdeadbeef) { - if (r3 < KERNELBASE) - r3 += KERNELBASE; - initrd_start = r3; - initrd_end = r3 + r4; - ROOT_DEV = Root_RAM0; - initrd_below_start_ok = 1; - } -#endif - chosen = find_devices("chosen"); - if (chosen != NULL) { - p = get_property(chosen, "bootargs", NULL); - if (p && *p) { - strlcpy(cmd_line, p, sizeof(cmd_line)); - } - } - } -#ifdef CONFIG_ADB - if (strstr(cmd_line, "adb_sync")) { - extern int __adb_probe_sync; - __adb_probe_sync = 1; - } -#endif /* CONFIG_ADB */ - - switch (_machine) { -#ifdef CONFIG_PPC_CHRP - case _MACH_chrp: - chrp_init(r3, r4, r5, r6, r7); - break; -#endif - } -#endif /* CONFIG_PPC_OF */ + prep_init(r3, r4, r5, r6, r7); } -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -#ifdef CONFIG_PPC_OF -#ifdef CONFIG_SERIAL_CORE_CONSOLE -extern char *of_stdout_device; - -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout; - char *name; - int offset = 0; - - if (of_stdout_device == NULL) - return -ENODEV; - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) - return -EBUSY; - - prom_stdout = find_path_device(of_stdout_device); - if (!prom_stdout) - return -ENODEV; - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) - return -ENODEV; - - if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - return -ENODEV; - } - } - } else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; - else - return -ENODEV; - return add_preferred_console("ttyS", offset, NULL); -} -console_initcall(set_preferred_console); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_OF */ +#endif /* CONFIG_PPC_PREP */ struct bi_record *find_bootinfo(void) { @@ -589,23 +372,6 @@ void parse_bootinfo(struct bi_record *rec) initrd_end = data[0] + data[1] + KERNELBASE; break; #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_MULTIPLATFORM - case BI_MACHTYPE: - /* Machine types changed with the merge. Since the - * bootinfo are now deprecated, we can just hard code - * the appropriate conversion here for when we are - * called with yaboot which passes us a machine type - * this way. - */ - switch(data[0]) { - case 1: _machine = _MACH_prep; break; - case 2: _machine = _MACH_Pmac; break; - case 4: _machine = _MACH_chrp; break; - default: - _machine = data[0]; - } - break; -#endif case BI_MEMSIZE: boot_mem_size = data[0]; break; @@ -631,9 +397,6 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_6xx ppc_md.power_save = ppc6xx_idle; #endif -#ifdef CONFIG_POWER4 - ppc_md.power_save = power4_idle; -#endif platform_init(r3, r4, r5, r6, r7); @@ -711,7 +474,7 @@ int __init ppc_init(void) if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff); /* register CPU devices */ - for_each_cpu(i) + for_each_possible_cpu(i) register_cpu(&cpu_devices[i], i, NULL); /* call platform init */ @@ -799,7 +562,4 @@ void __init setup_arch(char **cmdline_p) if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); paging_init(); - - /* this is for modules since _machine can be a define -- Cort */ - ppc_md.ppc_machine = _machine; } diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index e55cdda6149..f77795a64da 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -311,7 +311,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* Backup CPU 0 state */ __save_cpu_setup(); - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { if (cpu == smp_processor_id()) continue; /* create a process for the processor */ diff --git a/arch/ppc/lib/strcase.c b/arch/ppc/lib/strcase.c index 36b521091bb..3b0094cc2b5 100644 --- a/arch/ppc/lib/strcase.c +++ b/arch/ppc/lib/strcase.c @@ -1,4 +1,5 @@ #include <linux/ctype.h> +#include <linux/types.h> int strcasecmp(const char *s1, const char *s2) { @@ -11,7 +12,7 @@ int strcasecmp(const char *s1, const char *s2) return c1 - c2; } -int strncasecmp(const char *s1, const char *s2, int n) +int strncasecmp(const char *s1, const char *s2, size_t n) { int c1, c2; diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c index 0217188ef46..8e08ca32531 100644 --- a/arch/ppc/mm/fault.c +++ b/arch/ppc/mm/fault.c @@ -202,6 +202,7 @@ good_area: /* an exec - 4xx/Book-E allows for per-page execute permission */ } else if (TRAP(regs) == 0x400) { pte_t *ptep; + pmd_t *pmdp; #if 0 /* It would be nice to actually enforce the VM execute @@ -215,21 +216,24 @@ good_area: /* Since 4xx/Book-E supports per-page execute permission, * we lazily flush dcache to icache. */ ptep = NULL; - if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) { - struct page *page = pte_page(*ptep); - - if (! test_bit(PG_arch_1, &page->flags)) { - flush_dcache_icache_page(page); - set_bit(PG_arch_1, &page->flags); + if (get_pteptr(mm, address, &ptep, &pmdp)) { + spinlock_t *ptl = pte_lockptr(mm, pmdp); + spin_lock(ptl); + if (pte_present(*ptep)) { + struct page *page = pte_page(*ptep); + + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } + pte_update(ptep, 0, _PAGE_HWEXEC); + _tlbie(address); + pte_unmap_unlock(ptep, ptl); + up_read(&mm->mmap_sem); + return 0; } - pte_update(ptep, 0, _PAGE_HWEXEC); - _tlbie(address); - pte_unmap(ptep); - up_read(&mm->mmap_sem); - return 0; + pte_unmap_unlock(ptep, ptl); } - if (ptep != NULL) - pte_unmap(ptep); #endif /* a read */ } else { diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S index f09fa88db35..31d0a924317 100644 --- a/arch/ppc/mm/hashtable.S +++ b/arch/ppc/mm/hashtable.S @@ -74,12 +74,6 @@ _GLOBAL(hash_page_sync) */ .text _GLOBAL(hash_page) -#ifdef CONFIG_PPC64BRIDGE - mfmsr r0 - clrldi r0,r0,1 /* make sure it's in 32-bit mode */ - MTMSRD(r0) - isync -#endif tophys(r7,0) /* gets -KERNELBASE into r7 */ #ifdef CONFIG_SMP addis r8,r7,mmu_hash_lock@h @@ -303,7 +297,6 @@ Hash_base = 0xc0180000 Hash_bits = 12 /* e.g. 256kB hash table */ Hash_msk = (((1 << Hash_bits) - 1) * 64) -#ifndef CONFIG_PPC64BRIDGE /* defines for the PTE format for 32-bit PPCs */ #define PTE_SIZE 8 #define PTEG_SIZE 64 @@ -317,21 +310,6 @@ Hash_msk = (((1 << Hash_bits) - 1) * 64) #define SET_V(r) oris r,r,PTE_V@h #define CLR_V(r,t) rlwinm r,r,0,1,31 -#else -/* defines for the PTE format for 64-bit PPCs */ -#define PTE_SIZE 16 -#define PTEG_SIZE 128 -#define LG_PTEG_SIZE 7 -#define LDPTEu ldu -#define STPTE std -#define CMPPTE cmpd -#define PTE_H 2 -#define PTE_V 1 -#define TST_V(r) andi. r,r,PTE_V -#define SET_V(r) ori r,r,PTE_V -#define CLR_V(r,t) li t,PTE_V; andc r,r,t -#endif /* CONFIG_PPC64BRIDGE */ - #define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1) #define HASH_RIGHT 31-LG_PTEG_SIZE @@ -349,14 +327,8 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT) /* Construct the high word of the PPC-style PTE (r5) */ -#ifndef CONFIG_PPC64BRIDGE rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ rlwimi r5,r4,10,26,31 /* put in API (abbrev page index) */ -#else /* CONFIG_PPC64BRIDGE */ - clrlwi r3,r3,8 /* reduce vsid to 24 bits */ - sldi r5,r3,12 /* shift vsid into position */ - rlwimi r5,r4,16,20,24 /* put in API (abbrev page index) */ -#endif /* CONFIG_PPC64BRIDGE */ SET_V(r5) /* set V (valid) bit */ /* Get the address of the primary PTE group in the hash table (r3) */ @@ -540,14 +512,8 @@ _GLOBAL(flush_hash_pages) add r3,r3,r0 /* note code below trims to 24 bits */ /* Construct the high word of the PPC-style PTE (r11) */ -#ifndef CONFIG_PPC64BRIDGE rlwinm r11,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ rlwimi r11,r4,10,26,31 /* put in API (abbrev page index) */ -#else /* CONFIG_PPC64BRIDGE */ - clrlwi r3,r3,8 /* reduce vsid to 24 bits */ - sldi r11,r3,12 /* shift vsid into position */ - rlwimi r11,r4,16,20,24 /* put in API (abbrev page index) */ -#endif /* CONFIG_PPC64BRIDGE */ SET_V(r11) /* set V (valid) bit */ #ifdef CONFIG_SMP diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index cb1c294fb93..386e000bcb7 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -412,14 +412,6 @@ void __init mem_init(void) } #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_OF - /* mark the RTAS pages as reserved */ - if ( rtas_data ) - for (addr = (ulong)__va(rtas_data); - addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ; - addr += PAGE_SIZE) - SetPageReserved(virt_to_page(addr)); -#endif for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory; addr += PAGE_SIZE) { if (!PageReserved(virt_to_page(addr))) @@ -494,11 +486,6 @@ set_phys_avail(unsigned long total_memory) initrd_end - initrd_start, 1); } #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_OF - /* remove the RTAS pages from the available memory */ - if (rtas_data) - mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1); -#endif } /* Mark some memory as reserved by removing it from phys_avail. */ diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c index a8816e0f6a8..b4a4b3f02a1 100644 --- a/arch/ppc/mm/mmu_context.c +++ b/arch/ppc/mm/mmu_context.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and POWER3 implementations but excludes the 8xx and 4xx. + * 8260, and 83xx implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 6ea9185fd12..706bca8eb14 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -39,7 +39,7 @@ unsigned long ioremap_base; unsigned long ioremap_bot; int io_bat_index; -#if defined(CONFIG_6xx) || defined(CONFIG_POWER3) +#if defined(CONFIG_6xx) #define HAVE_BATS 1 #endif @@ -368,7 +368,7 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys, * the PTE pointer is unmodified if PTE is not found. */ int -get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep) +get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp) { pgd_t *pgd; pmd_t *pmd; @@ -383,6 +383,8 @@ get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep) if (pte) { retval = 1; *ptep = pte; + if (pmdp) + *pmdp = pmd; /* XXX caller needs to do pte_unmap, yuck */ } } @@ -420,7 +422,7 @@ unsigned long iopa(unsigned long addr) mm = &init_mm; pa = 0; - if (get_pteptr(mm, addr, &pte)) { + if (get_pteptr(mm, addr, &pte, NULL)) { pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK); pte_unmap(pte); } diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c index 9a381ed5eb2..25bb6f3347c 100644 --- a/arch/ppc/mm/ppc_mmu.c +++ b/arch/ppc/mm/ppc_mmu.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and POWER3 implementations but excludes the 8xx and 4xx. + * 8260, and 83xx implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: @@ -42,11 +42,7 @@ unsigned long _SDR1; union ubat { /* BAT register values to be loaded */ BAT bat; -#ifdef CONFIG_PPC64BRIDGE - u64 word[2]; -#else u32 word[2]; -#endif } BATS[4][2]; /* 4 pairs of IBAT, DBAT */ struct batrange { /* stores address ranges mapped by BATs */ @@ -83,9 +79,6 @@ unsigned long p_mapped_by_bats(unsigned long pa) unsigned long __init mmu_mapin_ram(void) { -#ifdef CONFIG_POWER4 - return 0; -#else unsigned long tot, bl, done; unsigned long max_size = (256<<20); unsigned long align; @@ -122,7 +115,6 @@ unsigned long __init mmu_mapin_ram(void) } return done; -#endif } /* @@ -205,27 +197,10 @@ void __init MMU_init_hw(void) if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105); -#ifdef CONFIG_PPC64BRIDGE -#define LG_HPTEG_SIZE 7 /* 128 bytes per HPTEG */ -#define SDR1_LOW_BITS (lg_n_hpteg - 11) -#define MIN_N_HPTEG 2048 /* min 256kB hash table */ -#else #define LG_HPTEG_SIZE 6 /* 64 bytes per HPTEG */ #define SDR1_LOW_BITS ((n_hpteg - 1) >> 10) #define MIN_N_HPTEG 1024 /* min 64kB hash table */ -#endif - -#ifdef CONFIG_POWER4 - /* The hash table has already been allocated and initialized - in prom.c */ - n_hpteg = Hash_size >> LG_HPTEG_SIZE; - lg_n_hpteg = __ilog2(n_hpteg); - - /* Remove the hash table from the available memory */ - if (Hash) - reserve_phys_mem(__pa(Hash), Hash_size); -#else /* CONFIG_POWER4 */ /* * Allow 1 HPTE (1/8 HPTEG) for each page of memory. * This is less than the recommended amount, but then @@ -248,7 +223,6 @@ void __init MMU_init_hw(void) Hash = mem_pieces_find(Hash_size, Hash_size); cacheable_memzero(Hash, Hash_size); _SDR1 = __pa(Hash) | SDR1_LOW_BITS; -#endif /* CONFIG_POWER4 */ Hash_end = (PTE *) ((unsigned long)Hash + Hash_size); diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index e8b91a33ce9..90c62229442 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -2,18 +2,10 @@ # Makefile for the linux kernel. # -# Extra CFLAGS so we don't have to do relative includes -CFLAGS_chrp_setup.o += -Iarch/$(ARCH)/mm - obj-$(CONFIG_APUS) += apus_setup.o ifeq ($(CONFIG_APUS),y) obj-$(CONFIG_PCI) += apus_pci.o endif -obj-$(CONFIG_PPC_CHRP) += chrp_setup.o chrp_time.o chrp_pci.o \ - chrp_pegasos_eth.o -ifeq ($(CONFIG_PPC_CHRP),y) -obj-$(CONFIG_NVRAM) += chrp_nvram.o -endif obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PQ2ADS) += pq2ads.o @@ -40,7 +32,3 @@ obj-$(CONFIG_EV64360) += ev64360.o obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o - -ifeq ($(CONFIG_SMP),y) -obj-$(CONFIG_PPC_CHRP) += chrp_smp.o -endif diff --git a/arch/ppc/platforms/chrp_nvram.c b/arch/ppc/platforms/chrp_nvram.c deleted file mode 100644 index 465ba9b090e..00000000000 --- a/arch/ppc/platforms/chrp_nvram.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * /dev/nvram driver for PPC - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <asm/uaccess.h> -#include <asm/prom.h> -#include <asm/machdep.h> - -static unsigned int nvram_size; -static unsigned char nvram_buf[4]; -static DEFINE_SPINLOCK(nvram_lock); - -static unsigned char chrp_nvram_read(int addr) -{ - unsigned long done, flags; - unsigned char ret; - - if (addr >= nvram_size) { - printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n", - current->comm, addr, nvram_size); - return 0xff; - } - spin_lock_irqsave(&nvram_lock, flags); - if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) - ret = 0xff; - else - ret = nvram_buf[0]; - spin_unlock_irqrestore(&nvram_lock, flags); - - return ret; -} - -static void chrp_nvram_write(int addr, unsigned char val) -{ - unsigned long done, flags; - - if (addr >= nvram_size) { - printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", - current->comm, addr, nvram_size); - return; - } - spin_lock_irqsave(&nvram_lock, flags); - nvram_buf[0] = val; - if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) - printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); - spin_unlock_irqrestore(&nvram_lock, flags); -} - -void __init chrp_nvram_init(void) -{ - struct device_node *nvram; - unsigned int *nbytes_p, proplen; - - nvram = of_find_node_by_type(NULL, "nvram"); - if (nvram == NULL) - return; - - nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen); - if (nbytes_p == NULL || proplen != sizeof(unsigned int)) - return; - - nvram_size = *nbytes_p; - - printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size); - of_node_put(nvram); - - ppc_md.nvram_read_val = chrp_nvram_read; - ppc_md.nvram_write_val = chrp_nvram_write; - - return; -} diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c deleted file mode 100644 index c7fe6182bb7..00000000000 --- a/arch/ppc/platforms/chrp_pci.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * CHRP pci routines. - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/hydra.h> -#include <asm/prom.h> -#include <asm/gg2.h> -#include <asm/machdep.h> -#include <asm/sections.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> - -/* LongTrail */ -void __iomem *gg2_pci_config_base; - -/* - * The VLSI Golden Gate II has only 512K of PCI configuration space, so we - * limit the bus number to 3 bits - */ - -int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off, - int len, u32 *val) -{ - volatile void __iomem *cfg_data; - struct pci_controller *hose = bus->sysdata; - - if (bus->number > 7) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that off is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); - switch (len) { - case 1: - *val = in_8(cfg_data); - break; - case 2: - *val = in_le16(cfg_data); - break; - default: - *val = in_le32(cfg_data); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, - int len, u32 val) -{ - volatile void __iomem *cfg_data; - struct pci_controller *hose = bus->sysdata; - - if (bus->number > 7) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that off is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); - switch (len) { - case 1: - out_8(cfg_data, val); - break; - case 2: - out_le16(cfg_data, val); - break; - default: - out_le32(cfg_data, val); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops gg2_pci_ops = -{ - gg2_read_config, - gg2_write_config -}; - -/* - * Access functions for PCI config space using RTAS calls. - */ -int -rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - unsigned long ret = ~0UL; - int rval; - - rval = call_rtas("read-pci-config", 2, 2, &ret, addr, len); - *val = ret; - return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; -} - -int -rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = call_rtas("write-pci-config", 3, 1, NULL, addr, len, val); - return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = -{ - rtas_read_config, - rtas_write_config -}; - -volatile struct Hydra __iomem *Hydra = NULL; - -int __init -hydra_init(void) -{ - struct device_node *np; - - np = find_devices("mac-io"); - if (np == NULL || np->n_addrs == 0) - return 0; - Hydra = ioremap(np->addrs[0].address, np->addrs[0].size); - printk("Hydra Mac I/O at %x\n", np->addrs[0].address); - printk("Hydra Feature_Control was %x", - in_le32(&Hydra->Feature_Control)); - out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | - HYDRA_FC_SCSI_CELL_EN | - HYDRA_FC_SCCA_ENABLE | - HYDRA_FC_SCCB_ENABLE | - HYDRA_FC_ARB_BYPASS | - HYDRA_FC_MPIC_ENABLE | - HYDRA_FC_SLOW_SCC_PCLK | - HYDRA_FC_MPIC_IS_MASTER)); - printk(", now %x\n", in_le32(&Hydra->Feature_Control)); - return 1; -} - -void __init -chrp_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - struct device_node *np; - - /* PCI interrupts are controlled by the OpenPIC */ - for_each_pci_dev(dev) { - np = pci_device_to_OF_node(dev); - if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0)) - dev->irq = np->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} - -#define PRG_CL_RESET_VALID 0x00010000 - -static void __init -setup_python(struct pci_controller *hose, struct device_node *dev) -{ - u32 __iomem *reg; - u32 val; - unsigned long addr = dev->addrs[0].address; - - setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010); - - /* Clear the magic go-slow bit */ - reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40); - val = in_be32(®[12]); - if (val & PRG_CL_RESET_VALID) { - out_be32(®[12], val & ~PRG_CL_RESET_VALID); - in_be32(®[12]); - } - iounmap(reg); -} - -/* Marvell Discovery II based Pegasos 2 */ -static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) -{ - struct device_node *root = find_path_device("/"); - struct device_node *rtas; - - rtas = of_find_node_by_name (root, "rtas"); - if (rtas) { - hose->ops = &rtas_pci_ops; - } else { - printk ("RTAS supporting Pegasos OF not found, please upgrade" - " your firmware\n"); - } - pci_assign_all_buses = 1; -} - -void __init -chrp_find_bridges(void) -{ - struct device_node *dev; - int *bus_range; - int len, index = -1; - struct pci_controller *hose; - unsigned int *dma; - char *model, *machine; - int is_longtrail = 0, is_mot = 0, is_pegasos = 0; - struct device_node *root = find_path_device("/"); - - /* - * The PCI host bridge nodes on some machines don't have - * properties to adequately identify them, so we have to - * look at what sort of machine this is as well. - */ - machine = get_property(root, "model", NULL); - if (machine != NULL) { - is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; - is_mot = strncmp(machine, "MOT", 3) == 0; - if (strncmp(machine, "Pegasos2", 8) == 0) - is_pegasos = 2; - else if (strncmp(machine, "Pegasos", 7) == 0) - is_pegasos = 1; - } - for (dev = root->child; dev != NULL; dev = dev->sibling) { - if (dev->type == NULL || strcmp(dev->type, "pci") != 0) - continue; - ++index; - /* The GG2 bridge on the LongTrail doesn't have an address */ - if (dev->n_addrs < 1 && !is_longtrail) { - printk(KERN_WARNING "Can't use %s: no address\n", - dev->full_name); - continue; - } - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - dev->full_name); - continue; - } - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO "PCI bus %d", bus_range[0]); - else - printk(KERN_INFO "PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s", dev->type); - if (dev->n_addrs > 0) - printk(" at %x", dev->addrs[0].address); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk("Can't allocate PCI controller structure for %s\n", - dev->full_name); - continue; - } - hose->arch_data = dev; - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - - model = get_property(dev, "model", NULL); - if (model == NULL) - model = "<none>"; - if (device_is_compatible(dev, "IBM,python")) { - setup_python(hose, dev); - } else if (is_mot - || strncmp(model, "Motorola, Grackle", 17) == 0) { - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); - } else if (is_longtrail) { - void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); - hose->ops = &gg2_pci_ops; - hose->cfg_data = p; - gg2_pci_config_base = p; - } else if (is_pegasos == 1) { - setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc); - } else if (is_pegasos == 2) { - setup_peg2(hose, dev); - } else { - printk("No methods for %s (model %s), using RTAS\n", - dev->full_name, model); - hose->ops = &rtas_pci_ops; - } - - pci_process_bridge_OF_ranges(hose, dev, index == 0); - - /* check the first bridge for a property that we can - use to set pci_dram_offset */ - dma = (unsigned int *) - get_property(dev, "ibm,dma-ranges", &len); - if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { - pci_dram_offset = dma[2] - dma[3]; - printk("pci_dram_offset = %lx\n", pci_dram_offset); - } - } - - /* Do not fixup interrupts from OF tree on pegasos */ - if (is_pegasos == 0) - ppc_md.pcibios_fixup = chrp_pcibios_fixup; -} diff --git a/arch/ppc/platforms/chrp_pegasos_eth.c b/arch/ppc/platforms/chrp_pegasos_eth.c deleted file mode 100644 index 9305c8aa137..00000000000 --- a/arch/ppc/platforms/chrp_pegasos_eth.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de> - * Thanks to : - * Dale Farnsworth <dale@farnsworth.org> - * Mark A. Greer <mgreer@mvista.com> - * Nicolas DET <nd@bplan-gmbh.de> - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - * And anyone else who helped me on this. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/mv643xx.h> -#include <linux/pci.h> - -#define PEGASOS2_MARVELL_REGBASE (0xf1000000) -#define PEGASOS2_MARVELL_REGSIZE (0x00004000) -#define PEGASOS2_SRAM_BASE (0xf2000000) -#define PEGASOS2_SRAM_SIZE (256*1024) - -#define PEGASOS2_SRAM_BASE_ETH0 (PEGASOS2_SRAM_BASE) -#define PEGASOS2_SRAM_BASE_ETH1 (PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) ) - - -#define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4) -#define PEGASOS2_SRAM_TXRING_SIZE (PEGASOS2_SRAM_SIZE/4) - -#undef BE_VERBOSE - -static struct resource mv643xx_eth_shared_resources[] = { - [0] = { - .name = "ethernet shared base", - .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, - .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + - MV643XX_ETH_SHARED_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv643xx_eth_shared_device = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), - .resource = mv643xx_eth_shared_resources, -}; - -static struct resource mv643xx_eth0_resources[] = { - [0] = { - .name = "eth0 irq", - .start = 9, - .end = 9, - .flags = IORESOURCE_IRQ, - }, -}; - - -static struct mv643xx_eth_platform_data eth0_pd = { - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0, - .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, - .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE, - .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, - .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, -}; - -static struct platform_device eth0_device = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth0_resources), - .resource = mv643xx_eth0_resources, - .dev = { - .platform_data = ð0_pd, - }, -}; - -static struct resource mv643xx_eth1_resources[] = { - [0] = { - .name = "eth1 irq", - .start = 9, - .end = 9, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth1_pd = { - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1, - .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, - .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE, - .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, - .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, -}; - -static struct platform_device eth1_device = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(mv643xx_eth1_resources), - .resource = mv643xx_eth1_resources, - .dev = { - .platform_data = ð1_pd, - }, -}; - -static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { - &mv643xx_eth_shared_device, - ð0_device, - ð1_device, -}; - -/***********/ -/***********/ -#define MV_READ(offset,val) { val = readl(mv643xx_reg_base + offset); } -#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset) - -static void __iomem *mv643xx_reg_base; - -static int Enable_SRAM(void) -{ - u32 ALong; - - if (mv643xx_reg_base == NULL) - mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE, - PEGASOS2_MARVELL_REGSIZE); - - if (mv643xx_reg_base == NULL) - return -ENOMEM; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n", - (void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base); -#endif - - MV_WRITE(MV64340_SRAM_CONFIG, 0); - - MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16); - - MV_READ(MV64340_BASE_ADDR_ENABLE, ALong); - ALong &= ~(1 << 19); - MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong); - - ALong = 0x02; - ALong |= PEGASOS2_SRAM_BASE & 0xffff0000; - MV_WRITE(MV643XX_ETH_BAR_4, ALong); - - MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000); - - MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); - ALong &= ~(1 << 4); - MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: register unmapped\n"); - printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE); -#endif - - iounmap(mv643xx_reg_base); - mv643xx_reg_base = NULL; - - return 1; -} - - -/***********/ -/***********/ -int mv643xx_eth_add_pds(void) -{ - int ret = 0; - static struct pci_device_id pci_marvell_mv64360[] = { - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) }, - { } - }; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: init\n"); -#endif - - if (pci_dev_present(pci_marvell_mv64360)) { - ret = platform_add_devices(mv643xx_eth_pd_devs, - ARRAY_SIZE(mv643xx_eth_pd_devs)); - - if ( Enable_SRAM() < 0) - { - eth0_pd.tx_sram_addr = 0; - eth0_pd.tx_sram_size = 0; - eth0_pd.rx_sram_addr = 0; - eth0_pd.rx_sram_size = 0; - - eth1_pd.tx_sram_addr = 0; - eth1_pd.tx_sram_size = 0; - eth1_pd.rx_sram_addr = 0; - eth1_pd.rx_sram_size = 0; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: Can't enable the " - "SRAM\n"); -#endif - } - } - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: init is over\n"); -#endif - - return ret; -} - -device_initcall(mv643xx_eth_add_pds); diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c deleted file mode 100644 index f9fd3f4f8e2..00000000000 --- a/arch/ppc/platforms/chrp_setup.c +++ /dev/null @@ -1,669 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - */ - -/* - * bootup setup stuff.. - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/tty.h> -#include <linux/major.h> -#include <linux/interrupt.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/version.h> -#include <linux/adb.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/console.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/initrd.h> -#include <linux/module.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/prom.h> -#include <asm/gg2.h> -#include <asm/pci-bridge.h> -#include <asm/dma.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/hydra.h> -#include <asm/sections.h> -#include <asm/time.h> -#include <asm/btext.h> -#include <asm/i8259.h> -#include <asm/open_pic.h> -#include <asm/xmon.h> -#include "mem_pieces.h" - -unsigned long chrp_get_rtc_time(void); -int chrp_set_rtc_time(unsigned long nowtime); -void chrp_calibrate_decr(void); -long chrp_time_init(void); - -void chrp_find_bridges(void); -void chrp_event_scan(void); -void rtas_display_progress(char *, unsigned short); -void rtas_indicator_progress(char *, unsigned short); -void btext_progress(char *, unsigned short); - -extern int of_show_percpuinfo(struct seq_file *, int); - -int _chrp_type; -EXPORT_SYMBOL(_chrp_type); - -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include <linux/interrupt.h> (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); - -extern dev_t boot_dev; - -extern PTE *Hash, *Hash_end; -extern unsigned long Hash_size, Hash_mask; -extern int probingmem; -extern unsigned long loops_per_jiffy; -static int max_width; - -#ifdef CONFIG_SMP -extern struct smp_ops_t chrp_smp_ops; -#endif - -static const char *gg2_memtypes[4] = { - "FPM", "SDRAM", "EDO", "BEDO" -}; -static const char *gg2_cachesizes[4] = { - "256 KB", "512 KB", "1 MB", "Reserved" -}; -static const char *gg2_cachetypes[4] = { - "Asynchronous", "Reserved", "Flow-Through Synchronous", - "Pipelined Synchronous" -}; -static const char *gg2_cachemodes[4] = { - "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" -}; - -int -chrp_show_cpuinfo(struct seq_file *m) -{ - int i, sdramen; - unsigned int t; - struct device_node *root; - const char *model = ""; - - root = find_path_device("/"); - if (root) - model = get_property(root, "model", NULL); - seq_printf(m, "machine\t\t: CHRP %s\n", model); - - /* longtrail (goldengate) stuff */ - if (!strncmp(model, "IBM,LongTrail", 13)) { - /* VLSI VAS96011/12 `Golden Gate 2' */ - /* Memory banks */ - sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) - >>31) & 1; - for (i = 0; i < (sdramen ? 4 : 6); i++) { - t = in_le32(gg2_pci_config_base+ - GG2_PCI_DRAM_BANK0+ - i*4); - if (!(t & 1)) - continue; - switch ((t>>8) & 0x1f) { - case 0x1f: - model = "4 MB"; - break; - case 0x1e: - model = "8 MB"; - break; - case 0x1c: - model = "16 MB"; - break; - case 0x18: - model = "32 MB"; - break; - case 0x10: - model = "64 MB"; - break; - case 0x00: - model = "128 MB"; - break; - default: - model = "Reserved"; - break; - } - seq_printf(m, "memory bank %d\t: %s %s\n", i, model, - gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); - } - /* L2 cache */ - t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); - seq_printf(m, "board l2\t: %s %s (%s)\n", - gg2_cachesizes[(t>>7) & 3], - gg2_cachetypes[(t>>2) & 3], - gg2_cachemodes[t & 3]); - } - return 0; -} - -/* - * Fixes for the National Semiconductor PC78308VUL SuperI/O - * - * Some versions of Open Firmware incorrectly initialize the IRQ settings - * for keyboard and mouse - */ -static inline void __init sio_write(u8 val, u8 index) -{ - outb(index, 0x15c); - outb(val, 0x15d); -} - -static inline u8 __init sio_read(u8 index) -{ - outb(index, 0x15c); - return inb(0x15d); -} - -static void __init sio_fixup_irq(const char *name, u8 device, u8 level, - u8 type) -{ - u8 level0, type0, active; - - /* select logical device */ - sio_write(device, 0x07); - active = sio_read(0x30); - level0 = sio_read(0x70); - type0 = sio_read(0x71); - if (level0 != level || type0 != type || !active) { - printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " - "remapping to level %d, type %d, active\n", - name, level0, type0, !active ? "in" : "", level, type); - sio_write(0x01, 0x30); - sio_write(level, 0x70); - sio_write(type, 0x71); - } -} - -static void __init sio_init(void) -{ - struct device_node *root; - - if ((root = find_path_device("/")) && - !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) { - /* logical device 0 (KBC/Keyboard) */ - sio_fixup_irq("keyboard", 0, 1, 2); - /* select logical device 1 (KBC/Mouse) */ - sio_fixup_irq("mouse", 1, 12, 2); - } -} - - -static void __init pegasos_set_l2cr(void) -{ - struct device_node *np; - - /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ - if (_chrp_type != _CHRP_Pegasos) - return; - - /* Enable L2 cache if needed */ - np = find_type_devices("cpu"); - if (np != NULL) { - unsigned int *l2cr = (unsigned int *) - get_property (np, "l2cr", NULL); - if (l2cr == NULL) { - printk ("Pegasos l2cr : no cpu l2cr property found\n"); - return; - } - if (!((*l2cr) & 0x80000000)) { - printk ("Pegasos l2cr : L2 cache was not active, " - "activating\n"); - _set_L2CR(0); - _set_L2CR((*l2cr) | 0x80000000); - } - } -} - -void __init chrp_setup_arch(void) -{ - struct device_node *device; - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000/HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - /* this is fine for chrp */ - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - /* On pegasos, enable the L2 cache if not already done by OF */ - pegasos_set_l2cr(); - - /* Lookup PCI host bridges */ - chrp_find_bridges(); - -#ifndef CONFIG_PPC64BRIDGE - /* - * Temporary fixes for PCI devices. - * -- Geert - */ - hydra_init(); /* Mac I/O */ - -#endif /* CONFIG_PPC64BRIDGE */ - - /* - * Fix the Super I/O configuration - */ - sio_init(); - - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - if ( rtas_data ) { - struct property *p; - device = find_devices("rtas"); - for ( p = device->properties; - p && strncmp(p->name, "rtas-event-scan-rate", 20); - p = p->next ) - /* nothing */ ; - if ( p && *(unsigned long *)p->value ) { - ppc_md.heartbeat = chrp_event_scan; - ppc_md.heartbeat_reset = (HZ/(*(unsigned long *)p->value)*30)-1; - ppc_md.heartbeat_count = 1; - printk("RTAS Event Scan Rate: %lu (%lu jiffies)\n", - *(unsigned long *)p->value, ppc_md.heartbeat_reset ); - } - } - - pci_create_OF_bus_map(); -} - -void -chrp_event_scan(void) -{ - unsigned char log[1024]; - unsigned long ret = 0; - /* XXX: we should loop until the hardware says no more error logs -- Cort */ - call_rtas( "event-scan", 4, 1, &ret, 0xffffffff, 0, - __pa(log), 1024 ); - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; -} - -void -chrp_restart(char *cmd) -{ - printk("RTAS system-reboot returned %d\n", - call_rtas("system-reboot", 0, 1, NULL)); - for (;;); -} - -void -chrp_power_off(void) -{ - /* allow power on only with power button press */ - printk("RTAS power-off returned %d\n", - call_rtas("power-off", 2, 1, NULL,0xffffffff,0xffffffff)); - for (;;); -} - -void -chrp_halt(void) -{ - chrp_power_off(); -} - -/* - * Finds the open-pic node and sets OpenPIC_Addr based on its reg property. - * Then checks if it has an interrupt-ranges property. If it does then - * we have a distributed open-pic, so call openpic_set_sources to tell - * the openpic code where to find the interrupt source registers. - */ -static void __init chrp_find_openpic(void) -{ - struct device_node *np; - int len, i; - unsigned int *iranges; - void __iomem *isu; - - np = find_type_devices("open-pic"); - if (np == NULL || np->n_addrs == 0) - return; - printk(KERN_INFO "OpenPIC at %x (size %x)\n", - np->addrs[0].address, np->addrs[0].size); - OpenPIC_Addr = ioremap(np->addrs[0].address, 0x40000); - if (OpenPIC_Addr == NULL) { - printk(KERN_ERR "Failed to map OpenPIC!\n"); - return; - } - - iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); - if (iranges == NULL || len < 2 * sizeof(unsigned int)) - return; /* not distributed */ - - /* - * The first pair of cells in interrupt-ranges refers to the - * IDU; subsequent pairs refer to the ISUs. - */ - len /= 2 * sizeof(unsigned int); - if (np->n_addrs < len) { - printk(KERN_ERR "Insufficient addresses for distributed" - " OpenPIC (%d < %d)\n", np->n_addrs, len); - return; - } - if (iranges[1] != 0) { - printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", - iranges[0], iranges[0] + iranges[1] - 1); - openpic_set_sources(iranges[0], iranges[1], NULL); - } - for (i = 1; i < len; ++i) { - iranges += 2; - printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x (%x)\n", - iranges[0], iranges[0] + iranges[1] - 1, - np->addrs[i].address, np->addrs[i].size); - isu = ioremap(np->addrs[i].address, np->addrs[i].size); - if (isu != NULL) - openpic_set_sources(iranges[0], iranges[1], isu); - else - printk(KERN_ERR "Failed to map OpenPIC ISU at %x!\n", - np->addrs[i].address); - } -} - -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) -static struct irqaction xmon_irqaction = { - .handler = xmon_irq, - .mask = CPU_MASK_NONE, - .name = "XMON break", -}; -#endif - -void __init chrp_init_IRQ(void) -{ - struct device_node *np; - unsigned long chrp_int_ack = 0; - unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - struct device_node *kbd; -#endif - - for (np = find_devices("pci"); np != NULL; np = np->next) { - unsigned int *addrp = (unsigned int *) - get_property(np, "8259-interrupt-acknowledge", NULL); - - if (addrp == NULL) - continue; - chrp_int_ack = addrp[prom_n_addr_cells(np)-1]; - break; - } - if (np == NULL) - printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); - - chrp_find_openpic(); - - if (OpenPIC_Addr) { - prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS); - OpenPIC_InitSenses = init_senses; - OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS; - - openpic_init(NUM_8259_INTERRUPTS); - /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */ - openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", - i8259_irq); - - } - i8259_init(chrp_int_ack, 0); - -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - /* see if there is a keyboard in the device tree - with a parent of type "adb" */ - for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next) - if (kbd->parent && kbd->parent->type - && strcmp(kbd->parent->type, "adb") == 0) - break; - if (kbd) - setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); -#endif -} - -void __init -chrp_init2(void) -{ -#ifdef CONFIG_NVRAM - chrp_nvram_init(); -#endif - - request_region(0x20,0x20,"pic1"); - request_region(0xa0,0x20,"pic2"); - request_region(0x00,0x20,"dma1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xc0,0x20,"dma2"); - - if (ppc_md.progress) - ppc_md.progress(" Have fun! ", 0x7777); -} - -static struct device_node *memory_node; - -static int __init get_mem_prop(char *name, struct mem_pieces *mp) -{ - struct reg_property *rp; - int i, s; - unsigned int *ip; - int nac = prom_n_addr_cells(memory_node); - int nsc = prom_n_size_cells(memory_node); - - ip = (unsigned int *) get_property(memory_node, name, &s); - if (ip == NULL) { - printk(KERN_ERR "error: couldn't get %s property on /memory\n", - name); - return 0; - } - s /= (nsc + nac) * 4; - rp = mp->regions; - for (i = 0; i < s; ++i, ip += nac+nsc) { - if (nac >= 2 && ip[nac-2] != 0) - continue; - rp->address = ip[nac-1]; - if (nsc >= 2 && ip[nac+nsc-2] != 0) - rp->size = ~0U; - else - rp->size = ip[nac+nsc-1]; - ++rp; - } - mp->n_regions = rp - mp->regions; - - /* Make sure the pieces are sorted. */ - mem_pieces_sort(mp); - mem_pieces_coalesce(mp); - return 1; -} - -static unsigned long __init chrp_find_end_of_memory(void) -{ - unsigned long a, total; - struct mem_pieces phys_mem; - - /* - * Find out where physical memory is, and check that it - * starts at 0 and is contiguous. It seems that RAM is - * always physically contiguous on Power Macintoshes. - * - * Supporting discontiguous physical memory isn't hard, - * it just makes the virtual <-> physical mapping functions - * more complicated (or else you end up wasting space - * in mem_map). - */ - memory_node = find_devices("memory"); - if (memory_node == NULL || !get_mem_prop("reg", &phys_mem) - || phys_mem.n_regions == 0) - panic("No RAM??"); - a = phys_mem.regions[0].address; - if (a != 0) - panic("RAM doesn't start at physical address 0"); - total = phys_mem.regions[0].size; - - if (phys_mem.n_regions > 1) { - printk("RAM starting at 0x%x is not contiguous\n", - phys_mem.regions[1].address); - printk("Using RAM from 0 to 0x%lx\n", total-1); - } - - return total; -} - -void __init -chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - struct device_node *root = find_path_device ("/"); - char *machine = NULL; - -#ifdef CONFIG_BLK_DEV_INITRD - /* take care of initrd if we have one */ - if ( r6 ) - { - initrd_start = r6 + KERNELBASE; - initrd_end = r6 + r7 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - isa_io_base = CHRP_ISA_IO_BASE; /* default value */ - ppc_do_canonicalize_irqs = 1; - - if (root) - machine = get_property(root, "model", NULL); - if (machine && strncmp(machine, "Pegasos", 7) == 0) { - _chrp_type = _CHRP_Pegasos; - } else if (machine && strncmp(machine, "IBM", 3) == 0) { - _chrp_type = _CHRP_IBM; - } else if (machine && strncmp(machine, "MOT", 3) == 0) { - _chrp_type = _CHRP_Motorola; - } else { - /* Let's assume it is an IBM chrp if all else fails */ - _chrp_type = _CHRP_IBM; - } - - ppc_md.setup_arch = chrp_setup_arch; - ppc_md.show_percpuinfo = of_show_percpuinfo; - ppc_md.show_cpuinfo = chrp_show_cpuinfo; - - ppc_md.init_IRQ = chrp_init_IRQ; - if (_chrp_type == _CHRP_Pegasos) - ppc_md.get_irq = i8259_irq; - else - ppc_md.get_irq = openpic_get_irq; - - ppc_md.init = chrp_init2; - - ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; - - ppc_md.restart = chrp_restart; - ppc_md.power_off = chrp_power_off; - ppc_md.halt = chrp_halt; - - ppc_md.time_init = chrp_time_init; - ppc_md.set_rtc_time = chrp_set_rtc_time; - ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; - - ppc_md.find_end_of_memory = chrp_find_end_of_memory; - - if (rtas_data) { - struct device_node *rtas; - unsigned int *p; - - rtas = find_devices("rtas"); - if (rtas != NULL) { - if (get_property(rtas, "display-character", NULL)) { - ppc_md.progress = rtas_display_progress; - p = (unsigned int *) get_property - (rtas, "ibm,display-line-length", NULL); - if (p) - max_width = *p; - } else if (get_property(rtas, "set-indicator", NULL)) - ppc_md.progress = rtas_indicator_progress; - } - } -#ifdef CONFIG_BOOTX_TEXT - if (ppc_md.progress == NULL && boot_text_mapped) - ppc_md.progress = btext_progress; -#endif - -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ - - /* - * Print the banner, then scroll down so boot progress - * can be printed. -- Cort - */ - if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); -} - -void -rtas_display_progress(char *s, unsigned short hex) -{ - int width; - char *os = s; - - if ( call_rtas( "display-character", 1, 1, NULL, '\r' ) ) - return; - - width = max_width; - while ( *os ) - { - if ( (*os == '\n') || (*os == '\r') ) - width = max_width; - else - width--; - call_rtas( "display-character", 1, 1, NULL, *os++ ); - /* if we overwrite the screen length */ - if ( width == 0 ) - while ( (*os != 0) && (*os != '\n') && (*os != '\r') ) - os++; - } - - /*while ( width-- > 0 )*/ - call_rtas( "display-character", 1, 1, NULL, ' ' ); -} - -void -rtas_indicator_progress(char *s, unsigned short hex) -{ - call_rtas("set-indicator", 3, 1, NULL, 6, 0, hex); -} - -#ifdef CONFIG_BOOTX_TEXT -void -btext_progress(char *s, unsigned short hex) -{ - prom_print(s); - prom_print("\n"); -} -#endif /* CONFIG_BOOTX_TEXT */ diff --git a/arch/ppc/platforms/chrp_smp.c b/arch/ppc/platforms/chrp_smp.c deleted file mode 100644 index 97e539557ec..00000000000 --- a/arch/ppc/platforms/chrp_smp.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Smp support for CHRP machines. - * - * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great - * deal of code from the sparc and intel versions. - * - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/spinlock.h> - -#include <asm/ptrace.h> -#include <asm/atomic.h> -#include <asm/irq.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/smp.h> -#include <asm/residual.h> -#include <asm/time.h> -#include <asm/open_pic.h> -#include <asm/machdep.h> - -extern unsigned long smp_chrp_cpu_nr; - -static int __init -smp_chrp_probe(void) -{ - if (smp_chrp_cpu_nr > 1) - openpic_request_IPIs(); - - return smp_chrp_cpu_nr; -} - -static void __devinit -smp_chrp_kick_cpu(int nr) -{ - *(unsigned long *)KERNELBASE = nr; - asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory"); -} - -static void __devinit -smp_chrp_setup_cpu(int cpu_nr) -{ - if (OpenPIC_Addr) - do_openpic_setup_cpu(); -} - -static DEFINE_SPINLOCK(timebase_lock); -static unsigned int timebase_upper = 0, timebase_lower = 0; - -void __devinit -smp_chrp_give_timebase(void) -{ - spin_lock(&timebase_lock); - call_rtas("freeze-time-base", 0, 1, NULL); - timebase_upper = get_tbu(); - timebase_lower = get_tbl(); - spin_unlock(&timebase_lock); - - while (timebase_upper || timebase_lower) - barrier(); - call_rtas("thaw-time-base", 0, 1, NULL); -} - -void __devinit -smp_chrp_take_timebase(void) -{ - while (!(timebase_upper || timebase_lower)) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase_upper, timebase_lower); - timebase_upper = 0; - timebase_lower = 0; - spin_unlock(&timebase_lock); - printk("CPU %i taken timebase\n", smp_processor_id()); -} - -/* CHRP with openpic */ -struct smp_ops_t chrp_smp_ops = { - .message_pass = smp_openpic_message_pass, - .probe = smp_chrp_probe, - .kick_cpu = smp_chrp_kick_cpu, - .setup_cpu = smp_chrp_setup_cpu, - .give_timebase = smp_chrp_give_timebase, - .take_timebase = smp_chrp_take_timebase, -}; diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c deleted file mode 100644 index c8627770af1..00000000000 --- a/arch/ppc/platforms/chrp_time.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * Copyright (C) 1991, 1992, 1995 Linus Torvalds - * - * Adapted for PowerPC (PReP) by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu). - * Copied and modified from arch/i386/kernel/time.c - * - */ -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/kernel_stat.h> -#include <linux/mc146818rtc.h> -#include <linux/init.h> -#include <linux/bcd.h> - -#include <asm/io.h> -#include <asm/nvram.h> -#include <asm/prom.h> -#include <asm/sections.h> -#include <asm/time.h> - -extern spinlock_t rtc_lock; - -static int nvram_as1 = NVRAM_AS1; -static int nvram_as0 = NVRAM_AS0; -static int nvram_data = NVRAM_DATA; - -long __init chrp_time_init(void) -{ - struct device_node *rtcs; - int base; - - rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); - if (rtcs == NULL) - rtcs = find_compatible_devices("rtc", "ds1385-rtc"); - if (rtcs == NULL || rtcs->addrs == NULL) - return 0; - base = rtcs->addrs[0].address; - nvram_as1 = 0; - nvram_as0 = base; - nvram_data = base + 1; - - return 0; -} - -int chrp_cmos_clock_read(int addr) -{ - if (nvram_as1 != 0) - outb(addr>>8, nvram_as1); - outb(addr, nvram_as0); - return (inb(nvram_data)); -} - -void chrp_cmos_clock_write(unsigned long val, int addr) -{ - if (nvram_as1 != 0) - outb(addr>>8, nvram_as1); - outb(addr, nvram_as0); - outb(val, nvram_data); - return; -} - -/* - * Set the hardware clock. -- Cort - */ -int chrp_set_rtc_time(unsigned long nowtime) -{ - unsigned char save_control, save_freq_select; - struct rtc_time tm; - - spin_lock(&rtc_lock); - to_tm(nowtime, &tm); - - save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */ - - chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ - - chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - tm.tm_year -= 1900; - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(tm.tm_sec); - BIN_TO_BCD(tm.tm_min); - BIN_TO_BCD(tm.tm_hour); - BIN_TO_BCD(tm.tm_mon); - BIN_TO_BCD(tm.tm_mday); - BIN_TO_BCD(tm.tm_year); - } - chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS); - chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES); - chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS); - chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH); - chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH); - chrp_cmos_clock_write(tm.tm_year,RTC_YEAR); - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - chrp_cmos_clock_write(save_control, RTC_CONTROL); - chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT); - - spin_unlock(&rtc_lock); - return 0; -} - -unsigned long chrp_get_rtc_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - int uip, i; - - /* The Linux interpretation of the CMOS clock register contents: - * When the Update-In-Progress (UIP) flag goes from 1 to 0, the - * RTC registers show the second which has precisely just started. - * Let's hope other operating systems interpret the RTC the same way. - */ - - /* Since the UIP flag is set for about 2.2 ms and the clock - * is typically written with a precision of 1 jiffy, trying - * to obtain a precision better than a few milliseconds is - * an illusion. Only consistency is interesting, this also - * allows to use the routine for /dev/rtc without a potential - * 1 second kernel busy loop triggered by any reader of /dev/rtc. - */ - - for ( i = 0; i<1000000; i++) { - uip = chrp_cmos_clock_read(RTC_FREQ_SELECT); - sec = chrp_cmos_clock_read(RTC_SECONDS); - min = chrp_cmos_clock_read(RTC_MINUTES); - hour = chrp_cmos_clock_read(RTC_HOURS); - day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH); - mon = chrp_cmos_clock_read(RTC_MONTH); - year = chrp_cmos_clock_read(RTC_YEAR); - uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT); - if ((uip & RTC_UIP)==0) break; - } - - if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - if ((year += 1900) < 1970) - year += 100; - return mktime(year, mon, day, hour, min, sec); -} - -/* - * Calibrate the decrementer frequency with the VIA timer 1. - */ -#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ - -/* VIA registers */ -#define RS 0x200 /* skip between registers */ -#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ -#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ -#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ -#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ -#define ACR (11*RS) /* Auxiliary control register */ -#define IFR (13*RS) /* Interrupt flag register */ - -/* Bits in ACR */ -#define T1MODE 0xc0 /* Timer 1 mode */ -#define T1MODE_CONT 0x40 /* continuous interrupts */ - -/* Bits in IFR and IER */ -#define T1_INT 0x40 /* Timer 1 interrupt */ - -static int __init chrp_via_calibrate_decr(void) -{ - struct device_node *vias; - volatile unsigned char __iomem *via; - int count = VIA_TIMER_FREQ_6 / 100; - unsigned int dstart, dend; - - vias = find_devices("via-cuda"); - if (vias == 0) - vias = find_devices("via"); - if (vias == 0 || vias->n_addrs == 0) - return 0; - via = ioremap(vias->addrs[0].address, vias->addrs[0].size); - - /* set timer 1 for continuous interrupts */ - out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); - /* set the counter to a small value */ - out_8(&via[T1CH], 2); - /* set the latch to `count' */ - out_8(&via[T1LL], count); - out_8(&via[T1LH], count >> 8); - /* wait until it hits 0 */ - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dstart = get_dec(); - /* clear the interrupt & wait until it hits 0 again */ - in_8(&via[T1CL]); - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dend = get_dec(); - - tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); - tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); - - printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", - tb_ticks_per_jiffy, dstart - dend); - - iounmap(via); - - return 1; -} - -void __init chrp_calibrate_decr(void) -{ - struct device_node *cpu; - unsigned int freq, *fp; - - if (chrp_via_calibrate_decr()) - return; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - freq = 16666000; /* hardcoded default */ - cpu = find_type_devices("cpu"); - if (cpu != 0) { - fp = (unsigned int *) - get_property(cpu, "timebase-frequency", NULL); - if (fp != 0) - freq = *fp; - } - printk("time_init: decrementer frequency = %u.%.6u MHz\n", - freq/1000000, freq%1000000); - tb_ticks_per_jiffy = freq / HZ; - tb_to_us = mulhwu_scale_factor(freq, 1000000); -} diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c index 5171b53bccb..fecbe9adc9e 100644 --- a/arch/ppc/platforms/lite5200.c +++ b/arch/ppc/platforms/lite5200.c @@ -34,8 +34,7 @@ #include <asm/mpc52xx.h> #include <asm/ppc_sys.h> #include <asm/machdep.h> - -#include <syslib/mpc52xx_pci.h> +#include <asm/pci-bridge.h> extern int powersave_nap; @@ -68,44 +67,53 @@ lite5200_show_cpuinfo(struct seq_file *m) } #ifdef CONFIG_PCI +#ifdef CONFIG_LITE5200B +static int +lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, + unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3}, + {MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0}, + }; + + const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} +#else /* Original Lite */ static int lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1; } #endif +#endif static void __init lite5200_setup_cpu(void) { - struct mpc52xx_cdm __iomem *cdm; struct mpc52xx_gpio __iomem *gpio; struct mpc52xx_intr __iomem *intr; - struct mpc52xx_xlb __iomem *xlb; u32 port_config; u32 intr_ctrl; /* Map zones */ - cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE); gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE); - xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE); intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE); - if (!cdm || !gpio || !xlb || !intr) { - printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during" - "lite5200_setup_cpu\n"); + if (!gpio || !intr) { + printk(KERN_ERR __FILE__ ": " + "Error while mapping GPIO/INTR during " + "lite5200_setup_cpu\n"); goto unmap_regs; } - /* Use internal 48 Mhz */ - out_8(&cdm->ext_48mhz_en, 0x00); - out_8(&cdm->fd_enable, 0x01); - if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ - out_be16(&cdm->fd_counters, 0x0001); - else - out_be16(&cdm->fd_counters, 0x5555); - /* Get port mux config */ port_config = in_be32(&gpio->port_config); @@ -116,29 +124,29 @@ lite5200_setup_cpu(void) port_config &= ~0x00007000; /* Differential mode - USB1 only */ port_config |= 0x00001000; + /* ATA CS is on csb_4/5 */ + port_config &= ~0x03000000; + port_config |= 0x01000000; + /* Commit port config */ out_be32(&gpio->port_config, port_config); - /* Configure the XLB Arbiter */ - out_be32(&xlb->master_pri_enable, 0xff); - out_be32(&xlb->master_priority, 0x11111111); - - /* Enable ram snooping for 1GB window */ - out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP); - out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); - - /* IRQ[0-3] setup : IRQ0 - Level Active Low */ - /* IRQ[1-3] - Level Active High */ + /* IRQ[0-3] setup */ intr_ctrl = in_be32(&intr->ctrl); intr_ctrl &= ~0x00ff0000; - intr_ctrl |= 0x00c00000; +#ifdef CONFIG_LITE5200B + /* IRQ[0-3] Level Active Low */ + intr_ctrl |= 0x00ff0000; +#else + /* IRQ0 Level Active Low + * IRQ[1-3] Level Active High */ + intr_ctrl |= 0x00c00000; +#endif out_be32(&intr->ctrl, intr_ctrl); /* Unmap reg zone */ unmap_regs: - if (cdm) iounmap(cdm); if (gpio) iounmap(gpio); - if (xlb) iounmap(xlb); if (intr) iounmap(intr); } @@ -146,7 +154,8 @@ static void __init lite5200_setup_arch(void) { /* CPU & Port mux setup */ - lite5200_setup_cpu(); + mpc52xx_setup_cpu(); /* Generic */ + lite5200_setup_cpu(); /* Platform specific */ #ifdef CONFIG_PCI /* PCI Bridge setup */ diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index a0fc628ffb1..e86f6156d58 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -736,7 +736,7 @@ ibm_statusled_progress(char *s, unsigned short hex) hex = 0xfff; if (!notifier_installed) { ++notifier_installed; - notifier_chain_register(&panic_notifier_list, + atomic_notifier_chain_register(&panic_notifier_list, &ibm_statusled_block); } } @@ -1067,15 +1067,13 @@ prep_map_io(void) static int __init prep_request_io(void) { - if (_machine == _MACH_prep) { #ifdef CONFIG_NVRAM - request_region(PREP_NVRAM_AS0, 0x8, "nvram"); + request_region(PREP_NVRAM_AS0, 0x8, "nvram"); #endif - request_region(0x00,0x20,"dma1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xc0,0x20,"dma2"); - } + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); return 0; } diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 5cb62c6a51c..490749ca88f 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -38,8 +38,6 @@ endif obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \ ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o obj-$(CONFIG_PCI_QSPAN) += qspan_pci.o -obj-$(CONFIG_PPC_OF) += prom_init.o prom.o -obj-$(CONFIG_PPC_CHRP) += open_pic.o obj-$(CONFIG_PPC_PREP) += open_pic.o todc_time.o obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c index 9ec525f9fe9..5a5a7a9cd24 100644 --- a/arch/ppc/syslib/mpc52xx_pci.c +++ b/arch/ppc/syslib/mpc52xx_pci.c @@ -225,7 +225,8 @@ mpc52xx_pci_fixup_resources(struct pci_dev *dev) /* The PCI Host bridge of MPC52xx has a prefetch memory resource fixed to 1Gb. Doesn't fit in the resource system so we remove it */ if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) && - (dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200) ) { + ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200 + || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) { struct resource *res = &dev->resource[1]; res->start = res->end = res->flags = 0; } diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c index 2ee48ce0a51..ee6379bb415 100644 --- a/arch/ppc/syslib/mpc52xx_setup.c +++ b/arch/ppc/syslib/mpc52xx_setup.c @@ -24,6 +24,8 @@ #include <asm/pgtable.h> #include <asm/ppcboot.h> +#include <syslib/mpc52xx_pci.h> + extern bd_t __res; static int core_mult[] = { /* CPU Frequency multiplier, taken */ @@ -216,6 +218,52 @@ mpc52xx_calibrate_decr(void) tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000); } + +void __init +mpc52xx_setup_cpu(void) +{ + struct mpc52xx_cdm __iomem *cdm; + struct mpc52xx_xlb __iomem *xlb; + + /* Map zones */ + cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE); + xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE); + + if (!cdm || !xlb) { + printk(KERN_ERR __FILE__ ": " + "Error while mapping CDM/XLB during " + "mpc52xx_setup_cpu\n"); + goto unmap_regs; + } + + /* Use internal 48 Mhz */ + out_8(&cdm->ext_48mhz_en, 0x00); + out_8(&cdm->fd_enable, 0x01); + if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ + out_be16(&cdm->fd_counters, 0x0001); + else + out_be16(&cdm->fd_counters, 0x5555); + + /* Configure the XLB Arbiter priorities */ + out_be32(&xlb->master_pri_enable, 0xff); + out_be32(&xlb->master_priority, 0x11111111); + + /* Enable ram snooping for 1GB window */ + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP); + out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); + + /* Disable XLB pipelining */ + /* (cfr errate 292. We could do this only just before ATA PIO + transaction and re-enable it after ...) */ + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); + + /* Unmap reg zone */ +unmap_regs: + if (cdm) iounmap(cdm); + if (xlb) iounmap(xlb); +} + + int mpc52xx_match_psc_function(int psc_idx, const char *func) { struct mpc52xx_psc_func *cf = mpc52xx_psc_functions; diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 38e5b93fbe4..70456c8f998 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -216,7 +216,7 @@ static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask, u_int openpic_read_IPI(volatile u_int __iomem * addr) { u_int val = 0; -#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3) +#if defined(OPENPIC_BIG_ENDIAN) val = in_be32(addr); #else val = in_le32(addr); diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c deleted file mode 100644 index 482f837fd37..00000000000 --- a/arch/ppc/syslib/prom.c +++ /dev/null @@ -1,1429 +0,0 @@ -/* - * Procedures for interfacing to the Open Firmware PROM on - * Power Macintosh computers. - * - * In particular, we are interested in the device tree - * and in using some of its services (exit, write to stdout). - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - */ -#include <stdarg.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/bitops.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/bootinfo.h> -#include <asm/btext.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> - - -struct pci_address { - unsigned a_hi; - unsigned a_mid; - unsigned a_lo; -}; - -struct pci_reg_property { - struct pci_address addr; - unsigned size_hi; - unsigned size_lo; -}; - -struct isa_reg_property { - unsigned space; - unsigned address; - unsigned size; -}; - -typedef unsigned long interpret_func(struct device_node *, unsigned long, - int, int); -static interpret_func interpret_pci_props; -static interpret_func interpret_dbdma_props; -static interpret_func interpret_isa_props; -static interpret_func interpret_macio_props; -static interpret_func interpret_root_props; - -extern char *klimit; - -/* Set for a newworld or CHRP machine */ -int use_of_interrupt_tree; -struct device_node *dflt_interrupt_controller; -int num_interrupt_controllers; - -extern unsigned int rtas_entry; /* physical pointer */ - -extern struct device_node *allnodes; - -static unsigned long finish_node(struct device_node *, unsigned long, - interpret_func *, int, int); -static unsigned long finish_node_interrupts(struct device_node *, unsigned long); -static struct device_node *find_phandle(phandle); - -extern void enter_rtas(void *); -void phys_call_rtas(int, int, int, ...); - -extern char cmd_line[512]; /* XXX */ -extern boot_infos_t *boot_infos; -unsigned long dev_tree_size; - -void -phys_call_rtas(int service, int nargs, int nret, ...) -{ - va_list list; - union { - unsigned long words[16]; - double align; - } u; - void (*rtas)(void *, unsigned long); - int i; - - u.words[0] = service; - u.words[1] = nargs; - u.words[2] = nret; - va_start(list, nret); - for (i = 0; i < nargs; ++i) - u.words[i+3] = va_arg(list, unsigned long); - va_end(list); - - rtas = (void (*)(void *, unsigned long)) rtas_entry; - rtas(&u, rtas_data); -} - -/* - * finish_device_tree is called once things are running normally - * (i.e. with text and data mapped to the address they were linked at). - * It traverses the device tree and fills in the name, type, - * {n_}addrs and {n_}intrs fields of each node. - */ -void __init -finish_device_tree(void) -{ - unsigned long mem = (unsigned long) klimit; - struct device_node *np; - - /* All CHRPs now use the interrupt tree */ - for (np = allnodes; np != NULL; np = np->allnext) { - if (get_property(np, "interrupt-parent", NULL)) { - use_of_interrupt_tree = 1; - break; - } - } - - if (use_of_interrupt_tree) { - /* - * We want to find out here how many interrupt-controller - * nodes there are, and if we are booted from BootX, - * we need a pointer to the first (and hopefully only) - * such node. But we can't use find_devices here since - * np->name has not been set yet. -- paulus - */ - int n = 0; - char *name, *ic; - int iclen; - - for (np = allnodes; np != NULL; np = np->allnext) { - ic = get_property(np, "interrupt-controller", &iclen); - name = get_property(np, "name", NULL); - /* checking iclen makes sure we don't get a false - match on /chosen.interrupt_controller */ - if ((name != NULL - && strcmp(name, "interrupt-controller") == 0) - || (ic != NULL && iclen == 0 && strcmp(name, "AppleKiwi"))) { - if (n == 0) - dflt_interrupt_controller = np; - ++n; - } - } - num_interrupt_controllers = n; - } - - mem = finish_node(allnodes, mem, NULL, 1, 1); - dev_tree_size = mem - (unsigned long) allnodes; - klimit = (char *) mem; -} - -static unsigned long __init -finish_node(struct device_node *np, unsigned long mem_start, - interpret_func *ifunc, int naddrc, int nsizec) -{ - struct device_node *child; - int *ip; - - np->name = get_property(np, "name", NULL); - np->type = get_property(np, "device_type", NULL); - - if (!np->name) - np->name = "<NULL>"; - if (!np->type) - np->type = "<NULL>"; - - /* get the device addresses and interrupts */ - if (ifunc != NULL) - mem_start = ifunc(np, mem_start, naddrc, nsizec); - - if (use_of_interrupt_tree) - mem_start = finish_node_interrupts(np, mem_start); - - /* Look for #address-cells and #size-cells properties. */ - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - naddrc = *ip; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - nsizec = *ip; - - if (np->parent == NULL) - ifunc = interpret_root_props; - else if (np->type == 0) - ifunc = NULL; - else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci")) - ifunc = interpret_pci_props; - else if (!strcmp(np->type, "dbdma")) - ifunc = interpret_dbdma_props; - else if (!strcmp(np->type, "mac-io") - || ifunc == interpret_macio_props) - ifunc = interpret_macio_props; - else if (!strcmp(np->type, "isa")) - ifunc = interpret_isa_props; - else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3")) - ifunc = interpret_root_props; - else if (!((ifunc == interpret_dbdma_props - || ifunc == interpret_macio_props) - && (!strcmp(np->type, "escc") - || !strcmp(np->type, "media-bay")))) - ifunc = NULL; - - /* if we were booted from BootX, convert the full name */ - if (boot_infos - && strncmp(np->full_name, "Devices:device-tree", 19) == 0) { - if (np->full_name[19] == 0) { - strcpy(np->full_name, "/"); - } else if (np->full_name[19] == ':') { - char *p = np->full_name + 19; - np->full_name = p; - for (; *p; ++p) - if (*p == ':') - *p = '/'; - } - } - - for (child = np->child; child != NULL; child = child->sibling) - mem_start = finish_node(child, mem_start, ifunc, - naddrc, nsizec); - - return mem_start; -} - -/* - * Find the interrupt parent of a node. - */ -static struct device_node * __init -intr_parent(struct device_node *p) -{ - phandle *parp; - - parp = (phandle *) get_property(p, "interrupt-parent", NULL); - if (parp == NULL) - return p->parent; - p = find_phandle(*parp); - if (p != NULL) - return p; - /* - * On a powermac booted with BootX, we don't get to know the - * phandles for any nodes, so find_phandle will return NULL. - * Fortunately these machines only have one interrupt controller - * so there isn't in fact any ambiguity. -- paulus - */ - if (num_interrupt_controllers == 1) - p = dflt_interrupt_controller; - return p; -} - -/* - * Find out the size of each entry of the interrupts property - * for a node. - */ -static int __init -prom_n_intr_cells(struct device_node *np) -{ - struct device_node *p; - unsigned int *icp; - - for (p = np; (p = intr_parent(p)) != NULL; ) { - icp = (unsigned int *) - get_property(p, "#interrupt-cells", NULL); - if (icp != NULL) - return *icp; - if (get_property(p, "interrupt-controller", NULL) != NULL - || get_property(p, "interrupt-map", NULL) != NULL) { - printk("oops, node %s doesn't have #interrupt-cells\n", - p->full_name); - return 1; - } - } - printk("prom_n_intr_cells failed for %s\n", np->full_name); - return 1; -} - -/* - * Map an interrupt from a device up to the platform interrupt - * descriptor. - */ -static int __init -map_interrupt(unsigned int **irq, struct device_node **ictrler, - struct device_node *np, unsigned int *ints, int nintrc) -{ - struct device_node *p, *ipar; - unsigned int *imap, *imask, *ip; - int i, imaplen, match; - int newintrc = 1, newaddrc = 1; - unsigned int *reg; - int naddrc; - - reg = (unsigned int *) get_property(np, "reg", NULL); - naddrc = prom_n_addr_cells(np); - p = intr_parent(np); - while (p != NULL) { - if (get_property(p, "interrupt-controller", NULL) != NULL) - /* this node is an interrupt controller, stop here */ - break; - imap = (unsigned int *) - get_property(p, "interrupt-map", &imaplen); - if (imap == NULL) { - p = intr_parent(p); - continue; - } - imask = (unsigned int *) - get_property(p, "interrupt-map-mask", NULL); - if (imask == NULL) { - printk("oops, %s has interrupt-map but no mask\n", - p->full_name); - return 0; - } - imaplen /= sizeof(unsigned int); - match = 0; - ipar = NULL; - while (imaplen > 0 && !match) { - /* check the child-interrupt field */ - match = 1; - for (i = 0; i < naddrc && match; ++i) - match = ((reg[i] ^ imap[i]) & imask[i]) == 0; - for (; i < naddrc + nintrc && match; ++i) - match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0; - imap += naddrc + nintrc; - imaplen -= naddrc + nintrc; - /* grab the interrupt parent */ - ipar = find_phandle((phandle) *imap++); - --imaplen; - if (ipar == NULL && num_interrupt_controllers == 1) - /* cope with BootX not giving us phandles */ - ipar = dflt_interrupt_controller; - if (ipar == NULL) { - printk("oops, no int parent %x in map of %s\n", - imap[-1], p->full_name); - return 0; - } - /* find the parent's # addr and intr cells */ - ip = (unsigned int *) - get_property(ipar, "#interrupt-cells", NULL); - if (ip == NULL) { - printk("oops, no #interrupt-cells on %s\n", - ipar->full_name); - return 0; - } - newintrc = *ip; - ip = (unsigned int *) - get_property(ipar, "#address-cells", NULL); - newaddrc = (ip == NULL)? 0: *ip; - imap += newaddrc + newintrc; - imaplen -= newaddrc + newintrc; - } - if (imaplen < 0) { - printk("oops, error decoding int-map on %s, len=%d\n", - p->full_name, imaplen); - return 0; - } - if (!match) { - printk("oops, no match in %s int-map for %s\n", - p->full_name, np->full_name); - return 0; - } - p = ipar; - naddrc = newaddrc; - nintrc = newintrc; - ints = imap - nintrc; - reg = ints - naddrc; - } - if (p == NULL) - printk("hmmm, int tree for %s doesn't have ctrler\n", - np->full_name); - *irq = ints; - *ictrler = p; - return nintrc; -} - -/* - * New version of finish_node_interrupts. - */ -static unsigned long __init -finish_node_interrupts(struct device_node *np, unsigned long mem_start) -{ - unsigned int *ints; - int intlen, intrcells; - int i, j, n, offset; - unsigned int *irq; - struct device_node *ic; - - ints = (unsigned int *) get_property(np, "interrupts", &intlen); - if (ints == NULL) - return mem_start; - intrcells = prom_n_intr_cells(np); - intlen /= intrcells * sizeof(unsigned int); - np->n_intrs = intlen; - np->intrs = (struct interrupt_info *) mem_start; - mem_start += intlen * sizeof(struct interrupt_info); - - for (i = 0; i < intlen; ++i) { - np->intrs[i].line = 0; - np->intrs[i].sense = 1; - n = map_interrupt(&irq, &ic, np, ints, intrcells); - if (n <= 0) - continue; - offset = 0; - /* - * On a CHRP we have an 8259 which is subordinate to - * the openpic in the interrupt tree, but we want the - * openpic's interrupt numbers offsetted, not the 8259's. - * So we apply the offset if the controller is at the - * root of the interrupt tree, i.e. has no interrupt-parent. - * This doesn't cope with the general case of multiple - * cascaded interrupt controllers, but then neither will - * irq.c at the moment either. -- paulus - * The G5 triggers that code, I add a machine test. On - * those machines, we want to offset interrupts from the - * second openpic by 128 -- BenH - */ - if (num_interrupt_controllers > 1 - && ic != NULL - && get_property(ic, "interrupt-parent", NULL) == NULL) - offset = 16; - - np->intrs[i].line = irq[0] + offset; - if (n > 1) - np->intrs[i].sense = irq[1]; - if (n > 2) { - printk("hmmm, got %d intr cells for %s:", n, - np->full_name); - for (j = 0; j < n; ++j) - printk(" %d", irq[j]); - printk("\n"); - } - ints += intrcells; - } - - return mem_start; -} - -/* - * When BootX makes a copy of the device tree from the MacOS - * Name Registry, it is in the format we use but all of the pointers - * are offsets from the start of the tree. - * This procedure updates the pointers. - */ -void __init -relocate_nodes(void) -{ - unsigned long base; - struct device_node *np; - struct property *pp; - -#define ADDBASE(x) (x = (typeof (x))((x)? ((unsigned long)(x) + base): 0)) - - base = (unsigned long) boot_infos + boot_infos->deviceTreeOffset; - allnodes = (struct device_node *)(base + 4); - for (np = allnodes; np != 0; np = np->allnext) { - ADDBASE(np->full_name); - ADDBASE(np->properties); - ADDBASE(np->parent); - ADDBASE(np->child); - ADDBASE(np->sibling); - ADDBASE(np->allnext); - for (pp = np->properties; pp != 0; pp = pp->next) { - ADDBASE(pp->name); - ADDBASE(pp->value); - ADDBASE(pp->next); - } - } -} - -int -prom_n_addr_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #address-cells property for the root node, default to 1 */ - return 1; -} - -int -prom_n_size_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #size-cells property for the root node, default to 1 */ - return 1; -} - -static unsigned long __init -map_addr(struct device_node *np, unsigned long space, unsigned long addr) -{ - int na; - unsigned int *ranges; - int rlen = 0; - unsigned int type; - - type = (space >> 24) & 3; - if (type == 0) - return addr; - - while ((np = np->parent) != NULL) { - if (strcmp(np->type, "pci") != 0) - continue; - /* PCI bridge: map the address through the ranges property */ - na = prom_n_addr_cells(np); - ranges = (unsigned int *) get_property(np, "ranges", &rlen); - while ((rlen -= (na + 5) * sizeof(unsigned int)) >= 0) { - if (((ranges[0] >> 24) & 3) == type - && ranges[2] <= addr - && addr - ranges[2] < ranges[na+4]) { - /* ok, this matches, translate it */ - addr += ranges[na+2] - ranges[2]; - break; - } - ranges += na + 5; - } - } - return addr; -} - -static unsigned long __init -interpret_pci_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct address_range *adr; - struct pci_reg_property *pci_addrs; - int i, l, *ip; - - pci_addrs = (struct pci_reg_property *) - get_property(np, "assigned-addresses", &l); - if (pci_addrs != 0 && l >= sizeof(struct pci_reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct pci_reg_property)) >= 0) { - adr[i].space = pci_addrs[i].addr.a_hi; - adr[i].address = map_addr(np, pci_addrs[i].addr.a_hi, - pci_addrs[i].addr.a_lo); - adr[i].size = pci_addrs[i].size_lo; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0 && np->parent) - ip = (int *) get_property(np->parent, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_dbdma_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct reg_property *rp; - struct address_range *adr; - unsigned long base_address; - int i, l, *ip; - struct device_node *db; - - base_address = 0; - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - - rp = (struct reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_macio_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct reg_property *rp; - struct address_range *adr; - unsigned long base_address; - int i, l, *ip; - struct device_node *db; - - base_address = 0; - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - - rp = (struct reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - mem_start += np->n_intrs * sizeof(struct interrupt_info); - } - - return mem_start; -} - -static unsigned long __init -interpret_isa_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct isa_reg_property *rp; - struct address_range *adr; - int i, l, *ip; - - rp = (struct isa_reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct isa_reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = rp[i].space; - adr[i].address = rp[i].address - + (adr[i].space? 0: _ISA_MEM_BASE); - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / (2 * sizeof(int)); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = *ip++; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_root_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct address_range *adr; - int i, l, *ip; - unsigned int *rp; - int rpsize = (naddrc + nsizec) * sizeof(unsigned int); - - rp = (unsigned int *) get_property(np, "reg", &l); - if (rp != 0 && l >= rpsize) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= rpsize) >= 0) { - adr[i].space = (naddrc >= 2? rp[naddrc-2]: 2); - adr[i].address = rp[naddrc - 1]; - adr[i].size = rp[naddrc + nsizec - 1]; - ++i; - rp += naddrc + nsizec; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -/* - * Work out the sense (active-low level / active-high edge) - * of each interrupt from the device tree. - */ -void __init -prom_get_irq_senses(unsigned char *senses, int off, int max) -{ - struct device_node *np; - int i, j; - - /* default to level-triggered */ - memset(senses, 1, max - off); - if (!use_of_interrupt_tree) - return; - - for (np = allnodes; np != 0; np = np->allnext) { - for (j = 0; j < np->n_intrs; j++) { - i = np->intrs[j].line; - if (i >= off && i < max) { - if (np->intrs[j].sense == 1) - senses[i-off] = (IRQ_SENSE_LEVEL - | IRQ_POLARITY_NEGATIVE); - else - senses[i-off] = (IRQ_SENSE_EDGE - | IRQ_POLARITY_POSITIVE); - } - } - } -} - -/* - * Construct and return a list of the device_nodes with a given name. - */ -struct device_node * -find_devices(const char *name) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->name != 0 && strcasecmp(np->name, name) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Construct and return a list of the device_nodes with a given type. - */ -struct device_node * -find_type_devices(const char *type) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->type != 0 && strcasecmp(np->type, type) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Returns all nodes linked together - */ -struct device_node * -find_all_nodes(void) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - *prevp = np; - prevp = &np->next; - } - *prevp = NULL; - return head; -} - -/* Checks if the given "compat" string matches one of the strings in - * the device's "compatible" property - */ -int -device_is_compatible(struct device_node *device, const char *compat) -{ - const char* cp; - int cplen, l; - - cp = (char *) get_property(device, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} - - -/* - * Indicates whether the root node has a given value in its - * compatible property. - */ -int -machine_is_compatible(const char *compat) -{ - struct device_node *root; - - root = find_path_device("/"); - if (root == 0) - return 0; - return device_is_compatible(root, compat); -} - -/* - * Construct and return a list of the device_nodes with a given type - * and compatible property. - */ -struct device_node * -find_compatible_devices(const char *type, const char *compat) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compat)) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Find the device_node with a given full_name. - */ -struct device_node * -find_path_device(const char *path) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - return np; - return NULL; -} - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. Currently, still lacks - * locking as old implementation, this is beeing done for ppc64. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet - * - *******/ - -/** - * of_find_node_by_name - Find a node by it's "name" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The name string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_name(struct device_node *from, - const char *name) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) - if (np->name != 0 && strcasecmp(np->name, name) == 0) - break; - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_node_by_type - Find a node by it's "device_type" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The type string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_type(struct device_node *from, - const char *type) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) - if (np->type != 0 && strcasecmp(np->type, type) == 0) - break; - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_compatible_node - Find a node based on type and one of the - * tokens in it's "compatible" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @type: The type string to match "device_type" or NULL to ignore - * @compatible: The string to match to one of the tokens in the device - * "compatible" list. - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compatible) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compatible)) - break; - } - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_node_by_path - Find a node matching a full OF path - * @path: The full path to match - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_path(const char *path) -{ - struct device_node *np = allnodes; - - for (; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - break; - return of_node_get(np); -} - -/** - * of_find_all_nodes - Get next node in global list - * @prev: Previous node or NULL to start iteration - * of_node_put() will be called on it - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_all_nodes(struct device_node *prev) -{ - return of_node_get(prev ? prev->allnext : allnodes); -} - -/** - * of_get_parent - Get a node's parent if any - * @node: Node to get parent - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_parent(const struct device_node *node) -{ - return node ? of_node_get(node->parent) : NULL; -} - -/** - * of_get_next_child - Iterate a node childs - * @node: parent node - * @prev: previous child of the parent node, or NULL to get first - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev) -{ - struct device_node *next = prev ? prev->sibling : node->child; - - for (; next != 0; next = next->sibling) - if (of_node_get(next)) - break; - if (prev) - of_node_put(prev); - return next; -} - -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns the node itself or NULL if gone. Current implementation - * does nothing as we don't yet do dynamic node allocation on ppc32 - */ -struct device_node *of_node_get(struct device_node *node) -{ - return node; -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - * Current implementation does nothing as we don't yet do dynamic node - * allocation on ppc32 - */ -void of_node_put(struct device_node *node) -{ -} - -/* - * Find the device_node with a given phandle. - */ -static struct device_node * __init -find_phandle(phandle ph) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->node == ph) - return np; - return NULL; -} - -/* - * Find a property with a given name for a given node - * and return the value. - */ -unsigned char * -get_property(struct device_node *np, const char *name, int *lenp) -{ - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) - if (pp->name != NULL && strcmp(pp->name, name) == 0) { - if (lenp != 0) - *lenp = pp->length; - return pp->value; - } - return NULL; -} - -/* - * Add a property to a node - */ -int -prom_add_property(struct device_node* np, struct property* prop) -{ - struct property **next = &np->properties; - - prop->next = NULL; - while (*next) - next = &(*next)->next; - *next = prop; - - return 0; -} - -/* I quickly hacked that one, check against spec ! */ -static inline unsigned long -bus_space_to_resource_flags(unsigned int bus_space) -{ - u8 space = (bus_space >> 24) & 0xf; - if (space == 0) - space = 0x02; - if (space == 0x02) - return IORESOURCE_MEM; - else if (space == 0x01) - return IORESOURCE_IO; - else { - printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n", - bus_space); - return 0; - } -} - -static struct resource* -find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range) -{ - unsigned long mask; - int i; - - /* Check this one */ - mask = bus_space_to_resource_flags(range->space); - for (i=0; i<DEVICE_COUNT_RESOURCE; i++) { - if ((pdev->resource[i].flags & mask) == mask && - pdev->resource[i].start <= range->address && - pdev->resource[i].end > range->address) { - if ((range->address + range->size - 1) > pdev->resource[i].end) { - /* Add better message */ - printk(KERN_WARNING "PCI/OF resource overlap !\n"); - return NULL; - } - break; - } - } - if (i == DEVICE_COUNT_RESOURCE) - return NULL; - return &pdev->resource[i]; -} - -/* - * Request an OF device resource. Currently handles child of PCI devices, - * or other nodes attached to the root node. Ultimately, put some - * link to resources in the OF node. - */ -struct resource* -request_OF_resource(struct device_node* node, int index, const char* name_postfix) -{ - struct pci_dev* pcidev; - u8 pci_bus, pci_devfn; - unsigned long iomask; - struct device_node* nd; - struct resource* parent; - struct resource *res = NULL; - int nlen, plen; - - if (index >= node->n_addrs) - goto fail; - - /* Sanity check on bus space */ - iomask = bus_space_to_resource_flags(node->addrs[index].space); - if (iomask & IORESOURCE_MEM) - parent = &iomem_resource; - else if (iomask & IORESOURCE_IO) - parent = &ioport_resource; - else - goto fail; - - /* Find a PCI parent if any */ - nd = node; - pcidev = NULL; - while(nd) { - if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn)) - pcidev = pci_find_slot(pci_bus, pci_devfn); - if (pcidev) break; - nd = nd->parent; - } - if (pcidev) - parent = find_parent_pci_resource(pcidev, &node->addrs[index]); - if (!parent) { - printk(KERN_WARNING "request_OF_resource(%s), parent not found\n", - node->name); - goto fail; - } - - res = __request_region(parent, node->addrs[index].address, node->addrs[index].size, NULL); - if (!res) - goto fail; - nlen = strlen(node->name); - plen = name_postfix ? strlen(name_postfix) : 0; - res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL); - if (res->name) { - strcpy((char *)res->name, node->name); - if (plen) - strcpy((char *)res->name+nlen, name_postfix); - } - return res; -fail: - return NULL; -} - -int -release_OF_resource(struct device_node* node, int index) -{ - struct pci_dev* pcidev; - u8 pci_bus, pci_devfn; - unsigned long iomask, start, end; - struct device_node* nd; - struct resource* parent; - struct resource *res = NULL; - - if (index >= node->n_addrs) - return -EINVAL; - - /* Sanity check on bus space */ - iomask = bus_space_to_resource_flags(node->addrs[index].space); - if (iomask & IORESOURCE_MEM) - parent = &iomem_resource; - else if (iomask & IORESOURCE_IO) - parent = &ioport_resource; - else - return -EINVAL; - - /* Find a PCI parent if any */ - nd = node; - pcidev = NULL; - while(nd) { - if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn)) - pcidev = pci_find_slot(pci_bus, pci_devfn); - if (pcidev) break; - nd = nd->parent; - } - if (pcidev) - parent = find_parent_pci_resource(pcidev, &node->addrs[index]); - if (!parent) { - printk(KERN_WARNING "release_OF_resource(%s), parent not found\n", - node->name); - return -ENODEV; - } - - /* Find us in the parent and its childs */ - res = parent->child; - start = node->addrs[index].address; - end = start + node->addrs[index].size - 1; - while (res) { - if (res->start == start && res->end == end && - (res->flags & IORESOURCE_BUSY)) - break; - if (res->start <= start && res->end >= end) - res = res->child; - else - res = res->sibling; - } - if (!res) - return -ENODEV; - - kfree(res->name); - res->name = NULL; - release_resource(res); - kfree(res); - - return 0; -} - -#if 0 -void -print_properties(struct device_node *np) -{ - struct property *pp; - char *cp; - int i, n; - - for (pp = np->properties; pp != 0; pp = pp->next) { - printk(KERN_INFO "%s", pp->name); - for (i = strlen(pp->name); i < 16; ++i) - printk(" "); - cp = (char *) pp->value; - for (i = pp->length; i > 0; --i, ++cp) - if ((i > 1 && (*cp < 0x20 || *cp > 0x7e)) - || (i == 1 && *cp != 0)) - break; - if (i == 0 && pp->length > 1) { - /* looks like a string */ - printk(" %s\n", (char *) pp->value); - } else { - /* dump it in hex */ - n = pp->length; - if (n > 64) - n = 64; - if (pp->length % 4 == 0) { - unsigned int *p = (unsigned int *) pp->value; - - n /= 4; - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 4) == 0) - printk("\n "); - printk(" %08x", *p++); - } - } else { - unsigned char *bp = pp->value; - - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 16) == 0) - printk("\n "); - printk(" %02x", *bp++); - } - } - printk("\n"); - if (pp->length > 64) - printk(" ... (length = %d)\n", - pp->length); - } - } -} -#endif - -static DEFINE_SPINLOCK(rtas_lock); - -/* this can be called after setup -- Cort */ -int -call_rtas(const char *service, int nargs, int nret, - unsigned long *outputs, ...) -{ - va_list list; - int i; - unsigned long s; - struct device_node *rtas; - int *tokp; - union { - unsigned long words[16]; - double align; - } u; - - rtas = find_devices("rtas"); - if (rtas == NULL) - return -1; - tokp = (int *) get_property(rtas, service, NULL); - if (tokp == NULL) { - printk(KERN_ERR "No RTAS service called %s\n", service); - return -1; - } - u.words[0] = *tokp; - u.words[1] = nargs; - u.words[2] = nret; - va_start(list, outputs); - for (i = 0; i < nargs; ++i) - u.words[i+3] = va_arg(list, unsigned long); - va_end(list); - - /* - * RTAS doesn't use floating point. - * Or at least, according to the CHRP spec we enter RTAS - * with FP disabled, and it doesn't change the FP registers. - * -- paulus. - */ - spin_lock_irqsave(&rtas_lock, s); - enter_rtas((void *)__pa(&u)); - spin_unlock_irqrestore(&rtas_lock, s); - - if (nret > 1 && outputs != NULL) - for (i = 0; i < nret-1; ++i) - outputs[i] = u.words[i+nargs+4]; - return u.words[nargs+3]; -} diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c deleted file mode 100644 index df14422ae1c..00000000000 --- a/arch/ppc/syslib/prom_init.c +++ /dev/null @@ -1,1011 +0,0 @@ -/* - * Note that prom_init() and anything called from prom_init() - * may be running at an address that is different from the address - * that it was linked at. References to static data items are - * handled by compiling this file with -mrelocatable-lib. - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/bitops.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/page.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/bootinfo.h> -#include <asm/btext.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> -#include <asm/cacheflush.h> - -#ifdef CONFIG_LOGO_LINUX_CLUT224 -#include <linux/linux_logo.h> -extern const struct linux_logo logo_linux_clut224; -#endif - -/* - * Properties whose value is longer than this get excluded from our - * copy of the device tree. This way we don't waste space storing - * things like "driver,AAPL,MacOS,PowerPC" properties. But this value - * does need to be big enough to ensure that we don't lose things - * like the interrupt-map property on a PCI-PCI bridge. - */ -#define MAX_PROPERTY_LENGTH 4096 - -#ifndef FB_MAX /* avoid pulling in all of the fb stuff */ -#define FB_MAX 8 -#endif - -#define ALIGNUL(x) (((x) + sizeof(unsigned long)-1) & -sizeof(unsigned long)) - -typedef u32 prom_arg_t; - -struct prom_args { - const char *service; - int nargs; - int nret; - prom_arg_t args[10]; -}; - -struct pci_address { - unsigned a_hi; - unsigned a_mid; - unsigned a_lo; -}; - -struct pci_reg_property { - struct pci_address addr; - unsigned size_hi; - unsigned size_lo; -}; - -struct pci_range { - struct pci_address addr; - unsigned phys; - unsigned size_hi; - unsigned size_lo; -}; - -struct isa_reg_property { - unsigned space; - unsigned address; - unsigned size; -}; - -struct pci_intr_map { - struct pci_address addr; - unsigned dunno; - phandle int_ctrler; - unsigned intr; -}; - -static void prom_exit(void); -static int call_prom(const char *service, int nargs, int nret, ...); -static int call_prom_ret(const char *service, int nargs, int nret, - prom_arg_t *rets, ...); -static void prom_print_hex(unsigned int v); -static int prom_set_color(ihandle ih, int i, int r, int g, int b); -static int prom_next_node(phandle *nodep); -static unsigned long check_display(unsigned long mem); -static void setup_disp_fake_bi(ihandle dp); -static unsigned long copy_device_tree(unsigned long mem_start, - unsigned long mem_end); -static unsigned long inspect_node(phandle node, struct device_node *dad, - unsigned long mem_start, unsigned long mem_end, - struct device_node ***allnextpp); -static void prom_hold_cpus(unsigned long mem); -static void prom_instantiate_rtas(void); -static void * early_get_property(unsigned long base, unsigned long node, - char *prop); - -prom_entry prom __initdata; -ihandle prom_chosen __initdata; -ihandle prom_stdout __initdata; - -static char *prom_display_paths[FB_MAX] __initdata; -static phandle prom_display_nodes[FB_MAX] __initdata; -static unsigned int prom_num_displays __initdata; -static ihandle prom_disp_node __initdata; -char *of_stdout_device __initdata; - -unsigned int rtas_data; /* physical pointer */ -unsigned int rtas_entry; /* physical pointer */ -unsigned int rtas_size; -unsigned int old_rtas; - -boot_infos_t *boot_infos; -char *bootpath; -char *bootdevice; -struct device_node *allnodes; - -extern char *klimit; - -static void __init -prom_exit(void) -{ - struct prom_args args; - - args.service = "exit"; - args.nargs = 0; - args.nret = 0; - prom(&args); - for (;;) /* should never get here */ - ; -} - -static int __init -call_prom(const char *service, int nargs, int nret, ...) -{ - va_list list; - int i; - struct prom_args prom_args; - - prom_args.service = service; - prom_args.nargs = nargs; - prom_args.nret = nret; - va_start(list, nret); - for (i = 0; i < nargs; ++i) - prom_args.args[i] = va_arg(list, prom_arg_t); - va_end(list); - for (i = 0; i < nret; ++i) - prom_args.args[i + nargs] = 0; - prom(&prom_args); - return prom_args.args[nargs]; -} - -static int __init -call_prom_ret(const char *service, int nargs, int nret, prom_arg_t *rets, ...) -{ - va_list list; - int i; - struct prom_args prom_args; - - prom_args.service = service; - prom_args.nargs = nargs; - prom_args.nret = nret; - va_start(list, rets); - for (i = 0; i < nargs; ++i) - prom_args.args[i] = va_arg(list, int); - va_end(list); - for (i = 0; i < nret; ++i) - prom_args.args[i + nargs] = 0; - prom(&prom_args); - for (i = 1; i < nret; ++i) - rets[i-1] = prom_args.args[nargs + i]; - return prom_args.args[nargs]; -} - -void __init -prom_print(const char *msg) -{ - const char *p, *q; - - if (prom_stdout == 0) - return; - - for (p = msg; *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, prom_stdout, p, q - p); - if (*q != 0) { - ++q; - call_prom("write", 3, 1, prom_stdout, "\r\n", 2); - } - } -} - -static void __init -prom_print_hex(unsigned int v) -{ - char buf[16]; - int i, c; - - for (i = 0; i < 8; ++i) { - c = (v >> ((7-i)*4)) & 0xf; - c += (c >= 10)? ('a' - 10): '0'; - buf[i] = c; - } - buf[i] = ' '; - buf[i+1] = 0; - prom_print(buf); -} - -static int __init -prom_set_color(ihandle ih, int i, int r, int g, int b) -{ - return call_prom("call-method", 6, 1, "color!", ih, i, b, g, r); -} - -static int __init -prom_next_node(phandle *nodep) -{ - phandle node; - - if ((node = *nodep) != 0 - && (*nodep = call_prom("child", 1, 1, node)) != 0) - return 1; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - for (;;) { - if ((node = call_prom("parent", 1, 1, node)) == 0) - return 0; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - } -} - -#ifdef CONFIG_POWER4 -/* - * Set up a hash table with a set of entries in it to map the - * first 64MB of RAM. This is used on 64-bit machines since - * some of them don't have BATs. - */ - -static inline void make_pte(unsigned long htab, unsigned int hsize, - unsigned int va, unsigned int pa, int mode) -{ - unsigned int *pteg; - unsigned int hash, i, vsid; - - vsid = ((va >> 28) * 0x111) << 12; - hash = ((va ^ vsid) >> 5) & 0x7fff80; - pteg = (unsigned int *)(htab + (hash & (hsize - 1))); - for (i = 0; i < 8; ++i, pteg += 4) { - if ((pteg[1] & 1) == 0) { - pteg[1] = vsid | ((va >> 16) & 0xf80) | 1; - pteg[3] = pa | mode; - break; - } - } -} - -extern unsigned long _SDR1; -extern PTE *Hash; -extern unsigned long Hash_size; - -static void __init -prom_alloc_htab(void) -{ - unsigned int hsize; - unsigned long htab; - unsigned int addr; - - /* - * Because of OF bugs we can't use the "claim" client - * interface to allocate memory for the hash table. - * This code is only used on 64-bit PPCs, and the only - * 64-bit PPCs at the moment are RS/6000s, and their - * OF is based at 0xc00000 (the 12M point), so we just - * arbitrarily use the 0x800000 - 0xc00000 region for the - * hash table. - * -- paulus. - */ - hsize = 4 << 20; /* POWER4 has no BATs */ - htab = (8 << 20); - call_prom("claim", 3, 1, htab, hsize, 0); - Hash = (void *)(htab + KERNELBASE); - Hash_size = hsize; - _SDR1 = htab + __ilog2(hsize) - 18; - - /* - * Put in PTEs for the first 64MB of RAM - */ - memset((void *)htab, 0, hsize); - for (addr = 0; addr < 0x4000000; addr += 0x1000) - make_pte(htab, hsize, addr + KERNELBASE, addr, - _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX); -#if 0 /* DEBUG stuff mapping the SCC */ - make_pte(htab, hsize, 0x80013000, 0x80013000, - _PAGE_ACCESSED | _PAGE_NO_CACHE | _PAGE_GUARDED | PP_RWXX); -#endif -} -#endif /* CONFIG_POWER4 */ - - -/* - * If we have a display that we don't know how to drive, - * we will want to try to execute OF's open method for it - * later. However, OF will probably fall over if we do that - * we've taken over the MMU. - * So we check whether we will need to open the display, - * and if so, open it now. - */ -static unsigned long __init -check_display(unsigned long mem) -{ - phandle node; - ihandle ih; - int i, j; - char type[16], *path; - static unsigned char default_colors[] = { - 0x00, 0x00, 0x00, - 0x00, 0x00, 0xaa, - 0x00, 0xaa, 0x00, - 0x00, 0xaa, 0xaa, - 0xaa, 0x00, 0x00, - 0xaa, 0x00, 0xaa, - 0xaa, 0xaa, 0x00, - 0xaa, 0xaa, 0xaa, - 0x55, 0x55, 0x55, - 0x55, 0x55, 0xff, - 0x55, 0xff, 0x55, - 0x55, 0xff, 0xff, - 0xff, 0x55, 0x55, - 0xff, 0x55, 0xff, - 0xff, 0xff, 0x55, - 0xff, 0xff, 0xff - }; - const unsigned char *clut; - - prom_disp_node = 0; - - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - call_prom("getprop", 4, 1, node, "device_type", - type, sizeof(type)); - if (strcmp(type, "display") != 0) - continue; - /* It seems OF doesn't null-terminate the path :-( */ - path = (char *) mem; - memset(path, 0, 256); - if (call_prom("package-to-path", 3, 1, node, path, 255) < 0) - continue; - - /* - * If this display is the device that OF is using for stdout, - * move it to the front of the list. - */ - mem += strlen(path) + 1; - i = prom_num_displays++; - if (of_stdout_device != 0 && i > 0 - && strcmp(of_stdout_device, path) == 0) { - for (; i > 0; --i) { - prom_display_paths[i] - = prom_display_paths[i-1]; - prom_display_nodes[i] - = prom_display_nodes[i-1]; - } - } - prom_display_paths[i] = path; - prom_display_nodes[i] = node; - if (i == 0) - prom_disp_node = node; - if (prom_num_displays >= FB_MAX) - break; - } - - for (j=0; j<prom_num_displays; j++) { - path = prom_display_paths[j]; - node = prom_display_nodes[j]; - prom_print("opening display "); - prom_print(path); - ih = call_prom("open", 1, 1, path); - if (ih == 0 || ih == (ihandle) -1) { - prom_print("... failed\n"); - for (i=j+1; i<prom_num_displays; i++) { - prom_display_paths[i-1] = prom_display_paths[i]; - prom_display_nodes[i-1] = prom_display_nodes[i]; - } - if (--prom_num_displays > 0) { - prom_disp_node = prom_display_nodes[j]; - j--; - } else - prom_disp_node = 0; - continue; - } else { - prom_print("... ok\n"); - call_prom("setprop", 4, 1, node, "linux,opened", 0, 0); - - /* - * Setup a usable color table when the appropriate - * method is available. - * Should update this to use set-colors. - */ - clut = default_colors; - for (i = 0; i < 32; i++, clut += 3) - if (prom_set_color(ih, i, clut[0], clut[1], - clut[2]) != 0) - break; - -#ifdef CONFIG_LOGO_LINUX_CLUT224 - clut = PTRRELOC(logo_linux_clut224.clut); - for (i = 0; i < logo_linux_clut224.clutsize; - i++, clut += 3) - if (prom_set_color(ih, i + 32, clut[0], - clut[1], clut[2]) != 0) - break; -#endif /* CONFIG_LOGO_LINUX_CLUT224 */ - } - } - - if (prom_stdout) { - phandle p; - p = call_prom("instance-to-package", 1, 1, prom_stdout); - if (p && p != -1) { - type[0] = 0; - call_prom("getprop", 4, 1, p, "device_type", - type, sizeof(type)); - if (strcmp(type, "display") == 0) - call_prom("setprop", 4, 1, p, "linux,boot-display", - 0, 0); - } - } - - return ALIGNUL(mem); -} - -/* This function will enable the early boot text when doing OF booting. This - * way, xmon output should work too - */ -static void __init -setup_disp_fake_bi(ihandle dp) -{ -#ifdef CONFIG_BOOTX_TEXT - int width = 640, height = 480, depth = 8, pitch; - unsigned address; - struct pci_reg_property addrs[8]; - int i, naddrs; - char name[32]; - char *getprop = "getprop"; - - prom_print("Initializing fake screen: "); - - memset(name, 0, sizeof(name)); - call_prom(getprop, 4, 1, dp, "name", name, sizeof(name)); - name[sizeof(name)-1] = 0; - prom_print(name); - prom_print("\n"); - call_prom(getprop, 4, 1, dp, "width", &width, sizeof(width)); - call_prom(getprop, 4, 1, dp, "height", &height, sizeof(height)); - call_prom(getprop, 4, 1, dp, "depth", &depth, sizeof(depth)); - pitch = width * ((depth + 7) / 8); - call_prom(getprop, 4, 1, dp, "linebytes", - &pitch, sizeof(pitch)); - if (pitch == 1) - pitch = 0x1000; /* for strange IBM display */ - address = 0; - call_prom(getprop, 4, 1, dp, "address", - &address, sizeof(address)); - if (address == 0) { - /* look for an assigned address with a size of >= 1MB */ - naddrs = call_prom(getprop, 4, 1, dp, "assigned-addresses", - addrs, sizeof(addrs)); - naddrs /= sizeof(struct pci_reg_property); - for (i = 0; i < naddrs; ++i) { - if (addrs[i].size_lo >= (1 << 20)) { - address = addrs[i].addr.a_lo; - /* use the BE aperture if possible */ - if (addrs[i].size_lo >= (16 << 20)) - address += (8 << 20); - break; - } - } - if (address == 0) { - prom_print("Failed to get address\n"); - return; - } - } - /* kludge for valkyrie */ - if (strcmp(name, "valkyrie") == 0) - address += 0x1000; - -#ifdef CONFIG_POWER4 -#if CONFIG_TASK_SIZE > 0x80000000 -#error CONFIG_TASK_SIZE cannot be above 0x80000000 with BOOTX_TEXT on G5 -#endif - { - extern boot_infos_t disp_bi; - unsigned long va, pa, i, offset; - va = 0x90000000; - pa = address & 0xfffff000ul; - offset = address & 0x00000fff; - - for (i=0; i<0x4000; i++) { - make_pte((unsigned long)Hash - KERNELBASE, Hash_size, va, pa, - _PAGE_ACCESSED | _PAGE_NO_CACHE | - _PAGE_GUARDED | PP_RWXX); - va += 0x1000; - pa += 0x1000; - } - btext_setup_display(width, height, depth, pitch, 0x90000000 | offset); - disp_bi.dispDeviceBase = (u8 *)address; - } -#else /* CONFIG_POWER4 */ - btext_setup_display(width, height, depth, pitch, address); - btext_prepare_BAT(); -#endif /* CONFIG_POWER4 */ -#endif /* CONFIG_BOOTX_TEXT */ -} - -/* - * Make a copy of the device tree from the PROM. - */ -static unsigned long __init -copy_device_tree(unsigned long mem_start, unsigned long mem_end) -{ - phandle root; - unsigned long new_start; - struct device_node **allnextp; - - root = call_prom("peer", 1, 1, (phandle)0); - if (root == (phandle)0) { - prom_print("couldn't get device tree root\n"); - prom_exit(); - } - allnextp = &allnodes; - mem_start = ALIGNUL(mem_start); - new_start = inspect_node(root, NULL, mem_start, mem_end, &allnextp); - *allnextp = NULL; - return new_start; -} - -static unsigned long __init -inspect_node(phandle node, struct device_node *dad, - unsigned long mem_start, unsigned long mem_end, - struct device_node ***allnextpp) -{ - int l; - phandle child; - struct device_node *np; - struct property *pp, **prev_propp; - char *prev_name, *namep; - unsigned char *valp; - - np = (struct device_node *) mem_start; - mem_start += sizeof(struct device_node); - memset(np, 0, sizeof(*np)); - np->node = node; - **allnextpp = PTRUNRELOC(np); - *allnextpp = &np->allnext; - if (dad != 0) { - np->parent = PTRUNRELOC(dad); - /* we temporarily use the `next' field as `last_child'. */ - if (dad->next == 0) - dad->child = PTRUNRELOC(np); - else - dad->next->sibling = PTRUNRELOC(np); - dad->next = np; - } - - /* get and store all properties */ - prev_propp = &np->properties; - prev_name = ""; - for (;;) { - pp = (struct property *) mem_start; - namep = (char *) (pp + 1); - pp->name = PTRUNRELOC(namep); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) - break; - mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1); - prev_name = namep; - valp = (unsigned char *) mem_start; - pp->value = PTRUNRELOC(valp); - pp->length = call_prom("getprop", 4, 1, node, namep, - valp, mem_end - mem_start); - if (pp->length < 0) - continue; -#ifdef MAX_PROPERTY_LENGTH - if (pp->length > MAX_PROPERTY_LENGTH) - continue; /* ignore this property */ -#endif - mem_start = ALIGNUL(mem_start + pp->length); - *prev_propp = PTRUNRELOC(pp); - prev_propp = &pp->next; - } - if (np->node != 0) { - /* Add a "linux,phandle" property" */ - pp = (struct property *) mem_start; - *prev_propp = PTRUNRELOC(pp); - prev_propp = &pp->next; - namep = (char *) (pp + 1); - pp->name = PTRUNRELOC(namep); - strcpy(namep, "linux,phandle"); - mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1); - pp->value = (unsigned char *) PTRUNRELOC(&np->node); - pp->length = sizeof(np->node); - } - *prev_propp = NULL; - - /* get the node's full name */ - l = call_prom("package-to-path", 3, 1, node, - mem_start, mem_end - mem_start); - if (l >= 0) { - char *p, *ep; - - np->full_name = PTRUNRELOC((char *) mem_start); - *(char *)(mem_start + l) = 0; - /* Fixup an Apple bug where they have bogus \0 chars in the - * middle of the path in some properties - */ - for (p = (char *)mem_start, ep = p + l; p < ep; p++) - if ((*p) == '\0') { - memmove(p, p+1, ep - p); - ep--; - } - mem_start = ALIGNUL(mem_start + l + 1); - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - mem_start = inspect_node(child, np, mem_start, mem_end, - allnextpp); - child = call_prom("peer", 1, 1, child); - } - - return mem_start; -} - -unsigned long smp_chrp_cpu_nr __initdata = 0; - -/* - * With CHRP SMP we need to use the OF to start the other - * processors so we can't wait until smp_boot_cpus (the OF is - * trashed by then) so we have to put the processors into - * a holding pattern controlled by the kernel (not OF) before - * we destroy the OF. - * - * This uses a chunk of high memory, puts some holding pattern - * code there and sends the other processors off to there until - * smp_boot_cpus tells them to do something. We do that by using - * physical address 0x0. The holding pattern checks that address - * until its cpu # is there, when it is that cpu jumps to - * __secondary_start(). smp_boot_cpus() takes care of setting those - * values. - * - * We also use physical address 0x4 here to tell when a cpu - * is in its holding pattern code. - * - * -- Cort - * - * Note that we have to do this if we have more than one CPU, - * even if this is a UP kernel. Otherwise when we trash OF - * the other CPUs will start executing some random instructions - * and crash the system. -- paulus - */ -static void __init -prom_hold_cpus(unsigned long mem) -{ - extern void __secondary_hold(void); - unsigned long i; - int cpu; - phandle node; - char type[16], *path; - unsigned int reg; - - /* - * XXX: hack to make sure we're chrp, assume that if we're - * chrp we have a device_type property -- Cort - */ - node = call_prom("finddevice", 1, 1, "/"); - if (call_prom("getprop", 4, 1, node, - "device_type", type, sizeof(type)) <= 0) - return; - - /* copy the holding pattern code to someplace safe (0) */ - /* the holding pattern is now within the first 0x100 - bytes of the kernel image -- paulus */ - memcpy((void *)0, _stext, 0x100); - flush_icache_range(0, 0x100); - - /* look for cpus */ - *(unsigned long *)(0x0) = 0; - asm volatile("dcbf 0,%0": : "r" (0) : "memory"); - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - call_prom("getprop", 4, 1, node, "device_type", - type, sizeof(type)); - if (strcmp(type, "cpu") != 0) - continue; - path = (char *) mem; - memset(path, 0, 256); - if (call_prom("package-to-path", 3, 1, node, path, 255) < 0) - continue; - reg = -1; - call_prom("getprop", 4, 1, node, "reg", ®, sizeof(reg)); - cpu = smp_chrp_cpu_nr++; -#ifdef CONFIG_SMP - smp_hw_index[cpu] = reg; -#endif /* CONFIG_SMP */ - /* XXX: hack - don't start cpu 0, this cpu -- Cort */ - if (cpu == 0) - continue; - prom_print("starting cpu "); - prom_print(path); - *(ulong *)(0x4) = 0; - call_prom("start-cpu", 3, 0, node, - (char *)__secondary_hold - _stext, cpu); - prom_print("..."); - for ( i = 0 ; (i < 10000) && (*(ulong *)(0x4) == 0); i++ ) - ; - if (*(ulong *)(0x4) == cpu) - prom_print("ok\n"); - else { - prom_print("failed: "); - prom_print_hex(*(ulong *)0x4); - prom_print("\n"); - } - } -} - -static void __init -prom_instantiate_rtas(void) -{ - ihandle prom_rtas; - prom_arg_t result; - - prom_rtas = call_prom("finddevice", 1, 1, "/rtas"); - if (prom_rtas == -1) - return; - - rtas_size = 0; - call_prom("getprop", 4, 1, prom_rtas, - "rtas-size", &rtas_size, sizeof(rtas_size)); - prom_print("instantiating rtas"); - if (rtas_size == 0) { - rtas_data = 0; - } else { - /* - * Ask OF for some space for RTAS. - * Actually OF has bugs so we just arbitrarily - * use memory at the 6MB point. - */ - rtas_data = 6 << 20; - prom_print(" at "); - prom_print_hex(rtas_data); - } - - prom_rtas = call_prom("open", 1, 1, "/rtas"); - prom_print("..."); - rtas_entry = 0; - if (call_prom_ret("call-method", 3, 2, &result, - "instantiate-rtas", prom_rtas, rtas_data) == 0) - rtas_entry = result; - if ((rtas_entry == -1) || (rtas_entry == 0)) - prom_print(" failed\n"); - else - prom_print(" done\n"); -} - -/* - * We enter here early on, when the Open Firmware prom is still - * handling exceptions and the MMU hash table for us. - */ -unsigned long __init -prom_init(int r3, int r4, prom_entry pp) -{ - unsigned long mem; - ihandle prom_mmu; - unsigned long offset = reloc_offset(); - int i, l; - char *p, *d; - unsigned long phys; - prom_arg_t result[3]; - char model[32]; - phandle node; - int rc; - - /* Default */ - phys = (unsigned long) &_stext; - - /* First get a handle for the stdout device */ - prom = pp; - prom_chosen = call_prom("finddevice", 1, 1, "/chosen"); - if (prom_chosen == -1) - prom_exit(); - if (call_prom("getprop", 4, 1, prom_chosen, "stdout", - &prom_stdout, sizeof(prom_stdout)) <= 0) - prom_exit(); - - /* Get the full OF pathname of the stdout device */ - mem = (unsigned long) klimit + offset; - p = (char *) mem; - memset(p, 0, 256); - call_prom("instance-to-path", 3, 1, prom_stdout, p, 255); - of_stdout_device = p; - mem += strlen(p) + 1; - - /* Get the boot device and translate it to a full OF pathname. */ - p = (char *) mem; - l = call_prom("getprop", 4, 1, prom_chosen, "bootpath", p, 1<<20); - if (l > 0) { - p[l] = 0; /* should already be null-terminated */ - bootpath = PTRUNRELOC(p); - mem += l + 1; - d = (char *) mem; - *d = 0; - call_prom("canon", 3, 1, p, d, 1<<20); - bootdevice = PTRUNRELOC(d); - mem = ALIGNUL(mem + strlen(d) + 1); - } - - prom_instantiate_rtas(); - -#ifdef CONFIG_POWER4 - /* - * Find out how much memory we have and allocate a - * suitably-sized hash table. - */ - prom_alloc_htab(); -#endif - mem = check_display(mem); - - prom_print("copying OF device tree..."); - mem = copy_device_tree(mem, mem + (1<<20)); - prom_print("done\n"); - - prom_hold_cpus(mem); - - klimit = (char *) (mem - offset); - - node = call_prom("finddevice", 1, 1, "/"); - rc = call_prom("getprop", 4, 1, node, "model", model, sizeof(model)); - if (rc > 0 && !strncmp (model, "Pegasos", 7) - && strncmp (model, "Pegasos2", 8)) { - /* Pegasos 1 has a broken translate method in the OF, - * and furthermore the BATs are mapped 1:1 so the phys - * address calculated above is correct, so let's use - * it directly. - */ - } else if (offset == 0) { - /* If we are already running at 0xc0000000, we assume we were - * loaded by an OF bootloader which did set a BAT for us. - * This breaks OF translate so we force phys to be 0. - */ - prom_print("(already at 0xc0000000) phys=0\n"); - phys = 0; - } else if (call_prom("getprop", 4, 1, prom_chosen, "mmu", - &prom_mmu, sizeof(prom_mmu)) <= 0) { - prom_print(" no MMU found\n"); - } else if (call_prom_ret("call-method", 4, 4, result, "translate", - prom_mmu, &_stext, 1) != 0) { - prom_print(" (translate failed)\n"); - } else { - /* We assume the phys. address size is 3 cells */ - phys = result[2]; - } - - if (prom_disp_node != 0) - setup_disp_fake_bi(prom_disp_node); - - /* Use quiesce call to get OF to shut down any devices it's using */ - prom_print("Calling quiesce ...\n"); - call_prom("quiesce", 0, 0); - - /* Relocate various pointers which will be used once the - kernel is running at the address it was linked at. */ - for (i = 0; i < prom_num_displays; ++i) - prom_display_paths[i] = PTRUNRELOC(prom_display_paths[i]); - -#ifdef CONFIG_SERIAL_CORE_CONSOLE - /* Relocate the of stdout for console autodetection */ - of_stdout_device = PTRUNRELOC(of_stdout_device); -#endif - - prom_print("returning 0x"); - prom_print_hex(phys); - prom_print("from prom_init\n"); - prom_stdout = 0; - - return phys; -} - -/* - * early_get_property is used to access the device tree image prepared - * by BootX very early on, before the pointers in it have been relocated. - */ -static void * __init -early_get_property(unsigned long base, unsigned long node, char *prop) -{ - struct device_node *np = (struct device_node *)(base + node); - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) { - pp = (struct property *) (base + (unsigned long)pp); - if (strcmp((char *)((unsigned long)pp->name + base), - prop) == 0) { - return (void *)((unsigned long)pp->value + base); - } - } - return NULL; -} - -/* Is boot-info compatible ? */ -#define BOOT_INFO_IS_COMPATIBLE(bi) ((bi)->compatible_version <= BOOT_INFO_VERSION) -#define BOOT_INFO_IS_V2_COMPATIBLE(bi) ((bi)->version >= 2) -#define BOOT_INFO_IS_V4_COMPATIBLE(bi) ((bi)->version >= 4) - -void __init -bootx_init(unsigned long r4, unsigned long phys) -{ - boot_infos_t *bi = (boot_infos_t *) r4; - unsigned long space; - unsigned long ptr, x; - char *model; - - boot_infos = PTRUNRELOC(bi); - if (!BOOT_INFO_IS_V2_COMPATIBLE(bi)) - bi->logicalDisplayBase = NULL; - -#ifdef CONFIG_BOOTX_TEXT - btext_init(bi); - - /* - * Test if boot-info is compatible. Done only in config - * CONFIG_BOOTX_TEXT since there is nothing much we can do - * with an incompatible version, except display a message - * and eventually hang the processor... - * - * I'll try to keep enough of boot-info compatible in the - * future to always allow display of this message; - */ - if (!BOOT_INFO_IS_COMPATIBLE(bi)) { - btext_drawstring(" !!! WARNING - Incompatible version of BootX !!!\n\n\n"); - btext_flushscreen(); - } -#endif /* CONFIG_BOOTX_TEXT */ - - /* New BootX enters kernel with MMU off, i/os are not allowed - here. This hack will have been done by the boostrap anyway. - */ - if (bi->version < 4) { - /* - * XXX If this is an iMac, turn off the USB controller. - */ - model = (char *) early_get_property - (r4 + bi->deviceTreeOffset, 4, "model"); - if (model - && (strcmp(model, "iMac,1") == 0 - || strcmp(model, "PowerMac1,1") == 0)) { - out_le32((unsigned *)0x80880008, 1); /* XXX */ - } - } - - /* Move klimit to enclose device tree, args, ramdisk, etc... */ - if (bi->version < 5) { - space = bi->deviceTreeOffset + bi->deviceTreeSize; - if (bi->ramDisk) - space = bi->ramDisk + bi->ramDiskSize; - } else - space = bi->totalParamsSize; - klimit = PTRUNRELOC((char *) bi + space); - - /* New BootX will have flushed all TLBs and enters kernel with - MMU switched OFF, so this should not be useful anymore. - */ - if (bi->version < 4) { - /* - * Touch each page to make sure the PTEs for them - * are in the hash table - the aim is to try to avoid - * getting DSI exceptions while copying the kernel image. - */ - for (ptr = ((unsigned long) &_stext) & PAGE_MASK; - ptr < (unsigned long)bi + space; ptr += PAGE_SIZE) - x = *(volatile unsigned long *)ptr; - } - -#ifdef CONFIG_BOOTX_TEXT - /* - * Note that after we call btext_prepare_BAT, we can't do - * prom_draw*, flushscreen or clearscreen until we turn the MMU - * on, since btext_prepare_BAT sets disp_bi.logicalDisplayBase - * to a virtual address. - */ - btext_prepare_BAT(); -#endif -} diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index ff86b2d814c..cfc2d6ad464 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -58,7 +58,7 @@ static struct sysrq_key_op sysrq_xmon_op = void xmon_map_scc(void) { -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP volatile unsigned char *base; #elif defined(CONFIG_GEMINI) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2b7364ed23b..01c5c082f97 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -14,6 +14,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/s390/crypto/crypt_s390_query.c b/arch/s390/crypto/crypt_s390_query.c index def02bdc44a..54fb11d7fad 100644 --- a/arch/s390/crypto/crypt_s390_query.c +++ b/arch/s390/crypto/crypt_s390_query.c @@ -55,7 +55,7 @@ static void query_available_functions(void) printk(KERN_INFO "KMC_AES_256: %d\n", crypt_s390_func_available(KMC_AES_256_ENCRYPT)); - /* query available KIMD fucntions */ + /* query available KIMD functions */ printk(KERN_INFO "KIMD_QUERY: %d\n", crypt_s390_func_available(KIMD_QUERY)); printk(KERN_INFO "KIMD_SHA_1: %d\n", diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index cc058dc3bc8..5e14de37c17 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -26,7 +26,6 @@ #include <linux/resource.h> #include <linux/times.h> #include <linux/utsname.h> -#include <linux/timex.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/sem.h> @@ -705,79 +704,6 @@ asmlinkage long sys32_sendfile64(int out_fd, int in_fd, return ret; } -/* Handle adjtimex compatibility. */ - -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - -extern int do_adjtimex(struct timex *); - -asmlinkage long sys32_adjtimex(struct timex32 __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if(get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if(put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - #ifdef CONFIG_SYSCTL struct __sysctl_args32 { u32 name; diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 50e80138e7a..199da68bd7b 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -551,10 +551,10 @@ sys32_newuname_wrapper: llgtr %r2,%r2 # struct new_utsname * jg s390x_newuname # branch to system call - .globl sys32_adjtimex_wrapper -sys32_adjtimex_wrapper: - llgtr %r2,%r2 # struct timex_emu31 * - jg sys32_adjtimex # branch to system call + .globl compat_sys_adjtimex_wrapper +compat_sys_adjtimex_wrapper: + llgtr %r2,%r2 # struct compat_timex * + jg compat_sys_adjtimex # branch to system call .globl sys32_mprotect_wrapper sys32_mprotect_wrapper: diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 99182a415fe..4a0f5a1551e 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -76,17 +76,17 @@ unsigned long thread_saved_pc(struct task_struct *tsk) /* * Need to know about CPUs going idle? */ -static struct notifier_block *idle_chain; +static ATOMIC_NOTIFIER_HEAD(idle_chain); int register_idle_notifier(struct notifier_block *nb) { - return notifier_chain_register(&idle_chain, nb); + return atomic_notifier_chain_register(&idle_chain, nb); } EXPORT_SYMBOL(register_idle_notifier); int unregister_idle_notifier(struct notifier_block *nb) { - return notifier_chain_unregister(&idle_chain, nb); + return atomic_notifier_chain_unregister(&idle_chain, nb); } EXPORT_SYMBOL(unregister_idle_notifier); @@ -95,7 +95,7 @@ void do_monitor_call(struct pt_regs *regs, long interruption_code) /* disable monitor call class 0 */ __ctl_clear_bit(8, 15); - notifier_call_chain(&idle_chain, CPU_NOT_IDLE, + atomic_notifier_call_chain(&idle_chain, CPU_NOT_IDLE, (void *)(long) smp_processor_id()); } @@ -116,7 +116,8 @@ static void default_idle(void) return; } - rc = notifier_call_chain(&idle_chain, CPU_IDLE, (void *)(long) cpu); + rc = atomic_notifier_call_chain(&idle_chain, + CPU_IDLE, (void *)(long) cpu); if (rc != NOTIFY_OK && rc != NOTIFY_DONE) BUG(); if (rc != NOTIFY_OK) { diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 7c88d85c359..2f56654da82 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -132,7 +132,7 @@ SYSCALL(sys_clone_glue,sys_clone_glue,sys32_clone_glue) /* 120 */ SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper) SYSCALL(sys_newuname,s390x_newuname,sys32_newuname_wrapper) NI_SYSCALL /* modify_ldt for i386 */ -SYSCALL(sys_adjtimex,sys_adjtimex,sys32_adjtimex_wrapper) +SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper) SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper) /* 125 */ SYSCALL(sys_sigprocmask,sys_sigprocmask,compat_sys_sigprocmask_wrapper) NI_SYSCALL /* old "create module" */ diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index e9b275d9073..58583f45947 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -21,6 +21,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_HARDIRQS bool default y diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 08c9515c480..c72e17a96ee 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -172,7 +172,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/MARKER archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach -.PHONY: maketools FORCE +PHONY += maketools FORCE maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c index 4d100f04807..a76c655dcee 100644 --- a/arch/sh/boards/mpc1211/rtc.c +++ b/arch/sh/boards/mpc1211/rtc.c @@ -9,36 +9,16 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/time.h> +#include <linux/bcd.h> #include <linux/mc146818rtc.h> -#ifndef BCD_TO_BIN -#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) -#endif - -#ifndef BIN_TO_BCD -#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) -#endif - -/* arc/i386/kernel/time.c */ unsigned long get_cmos_time(void) { unsigned int year, mon, day, hour, min, sec; - int i; spin_lock(&rtc_lock); - /* The Linux interpretation of the CMOS clock register contents: - * When the Update-In-Progress (UIP) flag goes from 1 to 0, the - * RTC registers show the second which has precisely just started. - * Let's hope other operating systems interpret the RTC the same way. - */ - /* read RTC exactly on falling edge of update flag */ - for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ - if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) - break; - for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */ - if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) - break; - do { /* Isn't this overkill ? UIP above should guarantee consistency */ + + do { sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES); hour = CMOS_READ(RTC_HOURS); @@ -46,18 +26,22 @@ unsigned long get_cmos_time(void) mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); } while (sec != CMOS_READ(RTC_SECONDS)); - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } + + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + spin_unlock(&rtc_lock); - if ((year += 1900) < 1970) + + year += 1900; + if (year < 1970) year += 100; + return mktime(year, mon, day, hour, min, sec); } diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/sh03/rtc.c index cbeca7037ba..d609863cfe5 100644 --- a/arch/sh/boards/sh03/rtc.c +++ b/arch/sh/boards/sh03/rtc.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/time.h> +#include <linux/bcd.h> #include <asm/io.h> #include <linux/rtc.h> #include <linux/spinlock.h> @@ -33,14 +34,6 @@ #define RTC_BUSY 1 #define RTC_STOP 2 -#ifndef BCD_TO_BIN -#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) -#endif - -#ifndef BIN_TO_BCD -#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) -#endif - extern void (*rtc_get_time)(struct timespec *); extern int (*rtc_set_time)(const time_t); extern spinlock_t rtc_lock; @@ -48,13 +41,9 @@ extern spinlock_t rtc_lock; unsigned long get_cmos_time(void) { unsigned int year, mon, day, hour, min, sec; - int i; spin_lock(&rtc_lock); again: - for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ - if (!(ctrl_inb(RTC_CTL) & RTC_BUSY)) - break; do { sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10; min = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10; diff --git a/arch/sh/kernel/cpu/rtc.c b/arch/sh/kernel/cpu/rtc.c index f8361f5e788..4304cf75cfa 100644 --- a/arch/sh/kernel/cpu/rtc.c +++ b/arch/sh/kernel/cpu/rtc.c @@ -9,18 +9,10 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/time.h> - +#include <linux/bcd.h> #include <asm/io.h> #include <asm/rtc.h> -#ifndef BCD_TO_BIN -#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) -#endif - -#ifndef BIN_TO_BCD -#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) -#endif - void sh_rtc_gettimeofday(struct timespec *ts) { unsigned int sec128, sec, sec2, min, hr, wk, day, mon, yr, yr100, cf_bit; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index c0e79843f58..7ee4ca20361 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -20,6 +20,7 @@ #include <linux/root_dev.h> #include <linux/utsname.h> #include <linux/cpu.h> +#include <linux/pfn.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/sections.h> @@ -275,10 +276,6 @@ void __init setup_arch(char **cmdline_p) sh_mv_setup(cmdline_p); -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - /* * Find the highest page frame number we have available */ diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig index 07b172deb87..58c678e0666 100644 --- a/arch/sh64/Kconfig +++ b/arch/sh64/Kconfig @@ -21,6 +21,14 @@ config RWSEM_GENERIC_SPINLOCK bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/sh64/kernel/setup.c b/arch/sh64/kernel/setup.c index c7a7b816a30..d2711c9c9d1 100644 --- a/arch/sh64/kernel/setup.c +++ b/arch/sh64/kernel/setup.c @@ -48,6 +48,7 @@ #include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/initrd.h> +#include <linux/pfn.h> #include <asm/processor.h> #include <asm/page.h> #include <asm/pgtable.h> diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c index 0773c9f389f..6b8f4d22abc 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh64/kernel/time.c @@ -30,6 +30,7 @@ #include <linux/profile.h> #include <linux/smp.h> #include <linux/module.h> +#include <linux/bcd.h> #include <asm/registers.h> /* required by inline __asm__ stmt. */ @@ -105,14 +106,6 @@ #define RCR1 rtc_base+0x38 #define RCR2 rtc_base+0x3c -#ifndef BCD_TO_BIN -#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) -#endif - -#ifndef BIN_TO_BCD -#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) -#endif - #define TICK_SIZE (tick_nsec / 1000) extern unsigned long wall_jiffies; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index f944b58cdfe..9431e967aa4 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -23,7 +23,6 @@ menu "General machine setup" config SMP bool "Symmetric multi-processing support (does not work on sun4/sun4c)" - depends on BROKEN ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more @@ -151,6 +150,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c index 4c60a6ef54a..aac8af5aae5 100644 --- a/arch/sparc/kernel/irq.c +++ b/arch/sparc/kernel/irq.c @@ -154,9 +154,11 @@ void (*sparc_init_timers)(irqreturn_t (*)(int, void *,struct pt_regs *)) = struct irqaction static_irqaction[MAX_STATIC_ALLOC]; int static_irq_count; -struct irqaction *irq_action[NR_IRQS] = { - [0 ... (NR_IRQS-1)] = NULL -}; +struct { + struct irqaction *action; + int flags; +} sparc_irq[NR_IRQS]; +#define SPARC_IRQ_INPROGRESS 1 /* Used to protect the IRQ action lists */ DEFINE_SPINLOCK(irq_action_lock); @@ -177,7 +179,7 @@ int show_interrupts(struct seq_file *p, void *v) } spin_lock_irqsave(&irq_action_lock, flags); if (i < NR_IRQS) { - action = *(i + irq_action); + action = sparc_irq[i].action; if (!action) goto out_unlock; seq_printf(p, "%3d: ", i); @@ -186,7 +188,7 @@ int show_interrupts(struct seq_file *p, void *v) #else for_each_online_cpu(j) { seq_printf(p, "%10u ", - kstat_cpu(cpu_logical_map(j)).irqs[i]); + kstat_cpu(j).irqs[i]); } #endif seq_printf(p, " %c %s", @@ -207,7 +209,7 @@ out_unlock: void free_irq(unsigned int irq, void *dev_id) { struct irqaction * action; - struct irqaction * tmp = NULL; + struct irqaction **actionp; unsigned long flags; unsigned int cpu_irq; @@ -225,7 +227,8 @@ void free_irq(unsigned int irq, void *dev_id) spin_lock_irqsave(&irq_action_lock, flags); - action = *(cpu_irq + irq_action); + actionp = &sparc_irq[cpu_irq].action; + action = *actionp; if (!action->handler) { printk("Trying to free free IRQ%d\n",irq); @@ -235,7 +238,7 @@ void free_irq(unsigned int irq, void *dev_id) for (; action; action = action->next) { if (action->dev_id == dev_id) break; - tmp = action; + actionp = &action->next; } if (!action) { printk("Trying to free free shared IRQ%d\n",irq); @@ -254,11 +257,8 @@ void free_irq(unsigned int irq, void *dev_id) irq, action->name); goto out_unlock; } - - if (action && tmp) - tmp->next = action->next; - else - *(cpu_irq + irq_action) = action->next; + + *actionp = action->next; spin_unlock_irqrestore(&irq_action_lock, flags); @@ -268,7 +268,7 @@ void free_irq(unsigned int irq, void *dev_id) kfree(action); - if (!(*(cpu_irq + irq_action))) + if (!sparc_irq[cpu_irq].action) disable_irq(irq); out_unlock: @@ -287,8 +287,11 @@ EXPORT_SYMBOL(free_irq); #ifdef CONFIG_SMP void synchronize_irq(unsigned int irq) { - printk("synchronize_irq says: implement me!\n"); - BUG(); + unsigned int cpu_irq; + + cpu_irq = irq & (NR_IRQS - 1); + while (sparc_irq[cpu_irq].flags & SPARC_IRQ_INPROGRESS) + cpu_relax(); } #endif /* SMP */ @@ -299,7 +302,7 @@ void unexpected_irq(int irq, void *dev_id, struct pt_regs * regs) unsigned int cpu_irq; cpu_irq = irq & (NR_IRQS - 1); - action = *(cpu_irq + irq_action); + action = sparc_irq[cpu_irq].action; printk("IO device interrupt, irq = %d\n", irq); printk("PC = %08lx NPC = %08lx FP=%08lx\n", regs->pc, @@ -330,7 +333,8 @@ void handler_irq(int irq, struct pt_regs * regs) if(irq < 10) smp4m_irq_rotate(cpu); #endif - action = *(irq + irq_action); + action = sparc_irq[irq].action; + sparc_irq[irq].flags |= SPARC_IRQ_INPROGRESS; kstat_cpu(cpu).irqs[irq]++; do { if (!action || !action->handler) @@ -338,6 +342,7 @@ void handler_irq(int irq, struct pt_regs * regs) action->handler(irq, action->dev_id, regs); action = action->next; } while (action); + sparc_irq[irq].flags &= ~SPARC_IRQ_INPROGRESS; enable_pil_irq(irq); irq_exit(); } @@ -389,7 +394,7 @@ int request_fast_irq(unsigned int irq, spin_lock_irqsave(&irq_action_lock, flags); - action = *(cpu_irq + irq_action); + action = sparc_irq[cpu_irq].action; if(action) { if(action->flags & SA_SHIRQ) panic("Trying to register fast irq when already shared.\n"); @@ -452,7 +457,7 @@ int request_fast_irq(unsigned int irq, action->dev_id = NULL; action->next = NULL; - *(cpu_irq + irq_action) = action; + sparc_irq[cpu_irq].action = action; enable_irq(irq); @@ -467,7 +472,7 @@ int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long irqflags, const char * devname, void *dev_id) { - struct irqaction * action, *tmp = NULL; + struct irqaction * action, **actionp; unsigned long flags; unsigned int cpu_irq; int ret; @@ -490,20 +495,20 @@ int request_irq(unsigned int irq, spin_lock_irqsave(&irq_action_lock, flags); - action = *(cpu_irq + irq_action); + actionp = &sparc_irq[cpu_irq].action; + action = *actionp; if (action) { - if ((action->flags & SA_SHIRQ) && (irqflags & SA_SHIRQ)) { - for (tmp = action; tmp->next; tmp = tmp->next); - } else { + if (!(action->flags & SA_SHIRQ) || !(irqflags & SA_SHIRQ)) { ret = -EBUSY; goto out_unlock; } - if ((action->flags & SA_INTERRUPT) ^ (irqflags & SA_INTERRUPT)) { + if ((action->flags & SA_INTERRUPT) != (irqflags & SA_INTERRUPT)) { printk("Attempt to mix fast and slow interrupts on IRQ%d denied\n", irq); ret = -EBUSY; goto out_unlock; - } - action = NULL; /* Or else! */ + } + for ( ; action; action = *actionp) + actionp = &action->next; } /* If this is flagged as statically allocated then we use our @@ -532,10 +537,7 @@ int request_irq(unsigned int irq, action->next = NULL; action->dev_id = dev_id; - if (tmp) - tmp->next = action; - else - *(cpu_irq + irq_action) = action; + *actionp = action; enable_irq(irq); diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c index ea5682ce703..2be81211519 100644 --- a/arch/sparc/kernel/smp.c +++ b/arch/sparc/kernel/smp.c @@ -45,6 +45,7 @@ volatile int __cpu_logical_map[NR_CPUS]; cpumask_t cpu_online_map = CPU_MASK_NONE; cpumask_t phys_cpu_present_map = CPU_MASK_NONE; +cpumask_t smp_commenced_mask = CPU_MASK_NONE; /* The only guaranteed locking primitive available on all Sparc * processors is 'ldstub [%reg + immediate], %dest_reg' which atomically @@ -57,11 +58,6 @@ cpumask_t phys_cpu_present_map = CPU_MASK_NONE; /* Used to make bitops atomic */ unsigned char bitops_spinlock = 0; -volatile unsigned long ipi_count; - -volatile int smp_process_available=0; -volatile int smp_commenced = 0; - void __init smp_store_cpu_info(int id) { int cpu_node; @@ -79,6 +75,22 @@ void __init smp_store_cpu_info(int id) void __init smp_cpus_done(unsigned int max_cpus) { + extern void smp4m_smp_done(void); + unsigned long bogosum = 0; + int cpu, num; + + for (cpu = 0, num = 0; cpu < NR_CPUS; cpu++) + if (cpu_online(cpu)) { + num++; + bogosum += cpu_data(cpu).udelay_val; + } + + printk("Total of %d processors activated (%lu.%02lu BogoMIPS).\n", + num, bogosum/(500000/HZ), + (bogosum/(5000/HZ))%100); + + BUG_ON(sparc_cpu_model != sun4m); + smp4m_smp_done(); } void cpu_panic(void) @@ -89,17 +101,6 @@ void cpu_panic(void) struct linux_prom_registers smp_penguin_ctable __initdata = { 0 }; -void __init smp_boot_cpus(void) -{ - extern void smp4m_boot_cpus(void); - extern void smp4d_boot_cpus(void); - - if (sparc_cpu_model == sun4m) - smp4m_boot_cpus(); - else - smp4d_boot_cpus(); -} - void smp_send_reschedule(int cpu) { /* See sparc64 */ @@ -252,20 +253,61 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } -void __init smp_prepare_cpus(unsigned int maxcpus) +void __init smp_prepare_cpus(unsigned int max_cpus) { + extern void smp4m_boot_cpus(void); + int i, cpuid, ncpus, extra; + + BUG_ON(sparc_cpu_model != sun4m); + printk("Entering SMP Mode...\n"); + + ncpus = 1; + extra = 0; + for (i = 0; !cpu_find_by_instance(i, NULL, &cpuid); i++) { + if (cpuid == boot_cpu_id) + continue; + if (cpuid < NR_CPUS && ncpus++ < max_cpus) + cpu_set(cpuid, phys_cpu_present_map); + else + extra++; + } + if (max_cpus >= NR_CPUS && extra) + printk("Warning: NR_CPUS is too low to start all cpus\n"); + + smp_store_cpu_info(boot_cpu_id); + + smp4m_boot_cpus(); } void __devinit smp_prepare_boot_cpu(void) { - current_thread_info()->cpu = hard_smp_processor_id(); - cpu_set(smp_processor_id(), cpu_online_map); - cpu_set(smp_processor_id(), phys_cpu_present_map); + int cpuid = hard_smp_processor_id(); + + if (cpuid >= NR_CPUS) { + prom_printf("Serious problem, boot cpu id >= NR_CPUS\n"); + prom_halt(); + } + if (cpuid != 0) + printk("boot cpu id != 0, this could work but is untested\n"); + + current_thread_info()->cpu = cpuid; + cpu_set(cpuid, cpu_online_map); + cpu_set(cpuid, phys_cpu_present_map); } int __devinit __cpu_up(unsigned int cpu) { - panic("smp doesn't work\n"); + extern int smp4m_boot_one_cpu(int); + int ret; + + ret = smp4m_boot_one_cpu(cpu); + + if (!ret) { + cpu_set(cpu, smp_commenced_mask); + while (!cpu_online(cpu)) + mb(); + } + return ret; } void smp_bogo(struct seq_file *m) diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index 19b25399d7e..2c21d790763 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -136,10 +136,6 @@ EXPORT_PER_CPU_SYMBOL(__cpu_data); /* IRQ implementation. */ EXPORT_SYMBOL(synchronize_irq); -/* Misc SMP information */ -EXPORT_SYMBOL(__cpu_number_map); -EXPORT_SYMBOL(__cpu_logical_map); - /* CPU online map and active count. */ EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(phys_cpu_present_map); diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c index cea7fc6fc6e..ca656d9bd6f 100644 --- a/arch/sparc/kernel/sun4d_irq.c +++ b/arch/sparc/kernel/sun4d_irq.c @@ -54,7 +54,7 @@ unsigned char cpu_leds[32]; unsigned char sbus_tid[32]; #endif -extern struct irqaction *irq_action[]; +static struct irqaction *irq_action[NR_IRQS]; extern spinlock_t irq_action_lock; struct sbus_action { diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 41bb9596be4..b141b7ee671 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -46,14 +46,16 @@ extern volatile int smp_processors_ready; extern int smp_num_cpus; static int smp_highest_cpu; extern volatile unsigned long cpu_callin_map[NR_CPUS]; -extern struct cpuinfo_sparc cpu_data[NR_CPUS]; +extern cpuinfo_sparc cpu_data[NR_CPUS]; extern unsigned char boot_cpu_id; extern int smp_activated; extern volatile int __cpu_number_map[NR_CPUS]; extern volatile int __cpu_logical_map[NR_CPUS]; extern volatile unsigned long ipi_count; extern volatile int smp_process_available; -extern volatile int smp_commenced; + +extern cpumask_t smp_commenced_mask; + extern int __smp4d_processor_id(void); /* #define SMP_DEBUG */ @@ -136,7 +138,7 @@ void __init smp4d_callin(void) local_irq_enable(); /* We don't allow PIL 14 yet */ - while(!smp_commenced) + while (!cpu_isset(cpuid, smp_commenced_mask)) barrier(); spin_lock_irqsave(&sun4d_imsk_lock, flags); diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 1dde312eebd..70b375a4c2c 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -40,15 +40,11 @@ extern ctxd_t *srmmu_ctx_table_phys; extern void calibrate_delay(void); extern volatile int smp_processors_ready; -extern int smp_num_cpus; extern volatile unsigned long cpu_callin_map[NR_CPUS]; extern unsigned char boot_cpu_id; -extern int smp_activated; -extern volatile int __cpu_number_map[NR_CPUS]; -extern volatile int __cpu_logical_map[NR_CPUS]; -extern volatile unsigned long ipi_count; -extern volatile int smp_process_available; -extern volatile int smp_commenced; + +extern cpumask_t smp_commenced_mask; + extern int __smp4m_processor_id(void); /*#define SMP_DEBUG*/ @@ -77,8 +73,6 @@ void __init smp4m_callin(void) local_flush_cache_all(); local_flush_tlb_all(); - set_irq_udt(boot_cpu_id); - /* Get our local ticker going. */ smp_setup_percpu_timer(); @@ -95,8 +89,9 @@ void __init smp4m_callin(void) * to call the scheduler code. */ /* Allow master to continue. */ - swap((unsigned long *)&cpu_callin_map[cpuid], 1); + swap(&cpu_callin_map[cpuid], 1); + /* XXX: What's up with all the flushes? */ local_flush_cache_all(); local_flush_tlb_all(); @@ -111,13 +106,14 @@ void __init smp4m_callin(void) atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; - while(!smp_commenced) - barrier(); - - local_flush_cache_all(); - local_flush_tlb_all(); + while (!cpu_isset(cpuid, smp_commenced_mask)) + mb(); local_irq_enable(); + + cpu_set(cpuid, cpu_online_map); + /* last one in gets all the interrupts (for testing) */ + set_irq_udt(boot_cpu_id); } extern void init_IRQ(void); @@ -134,102 +130,76 @@ extern unsigned long trapbase_cpu3[]; void __init smp4m_boot_cpus(void) { - int cpucount = 0; - int i, mid; + smp_setup_percpu_timer(); + local_flush_cache_all(); +} - printk("Entering SMP Mode...\n"); +int smp4m_boot_one_cpu(int i) +{ + extern unsigned long sun4m_cpu_startup; + unsigned long *entry = &sun4m_cpu_startup; + struct task_struct *p; + int timeout; + int cpu_node; - local_irq_enable(); - cpus_clear(cpu_present_map); + cpu_find_by_mid(i, &cpu_node); + + /* Cook up an idler for this guy. */ + p = fork_idle(i); + current_set[i] = task_thread_info(p); + /* See trampoline.S for details... */ + entry += ((i-1) * 3); - for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++) - cpu_set(mid, cpu_present_map); + /* + * Initialize the contexts table + * Since the call to prom_startcpu() trashes the structure, + * we need to re-initialize it for each cpu + */ + smp_penguin_ctable.which_io = 0; + smp_penguin_ctable.phys_addr = (unsigned int) srmmu_ctx_table_phys; + smp_penguin_ctable.reg_size = 0; - for(i=0; i < NR_CPUS; i++) { - __cpu_number_map[i] = -1; - __cpu_logical_map[i] = -1; + /* whirrr, whirrr, whirrrrrrrrr... */ + printk("Starting CPU %d at %p\n", i, entry); + local_flush_cache_all(); + prom_startcpu(cpu_node, + &smp_penguin_ctable, 0, (char *)entry); + + /* wheee... it's going... */ + for(timeout = 0; timeout < 10000; timeout++) { + if(cpu_callin_map[i]) + break; + udelay(200); } - __cpu_number_map[boot_cpu_id] = 0; - __cpu_logical_map[0] = boot_cpu_id; - current_thread_info()->cpu = boot_cpu_id; + if (!(cpu_callin_map[i])) { + printk("Processor %d is stuck.\n", i); + return -ENODEV; + } - smp_store_cpu_info(boot_cpu_id); - set_irq_udt(boot_cpu_id); - smp_setup_percpu_timer(); local_flush_cache_all(); - if(cpu_find_by_instance(1, NULL, NULL)) - return; /* Not an MP box. */ - for(i = 0; i < NR_CPUS; i++) { - if(i == boot_cpu_id) - continue; - - if (cpu_isset(i, cpu_present_map)) { - extern unsigned long sun4m_cpu_startup; - unsigned long *entry = &sun4m_cpu_startup; - struct task_struct *p; - int timeout; - - /* Cook up an idler for this guy. */ - p = fork_idle(i); - cpucount++; - current_set[i] = task_thread_info(p); - /* See trampoline.S for details... */ - entry += ((i-1) * 3); - - /* - * Initialize the contexts table - * Since the call to prom_startcpu() trashes the structure, - * we need to re-initialize it for each cpu - */ - smp_penguin_ctable.which_io = 0; - smp_penguin_ctable.phys_addr = (unsigned int) srmmu_ctx_table_phys; - smp_penguin_ctable.reg_size = 0; - - /* whirrr, whirrr, whirrrrrrrrr... */ - printk("Starting CPU %d at %p\n", i, entry); - local_flush_cache_all(); - prom_startcpu(cpu_data(i).prom_node, - &smp_penguin_ctable, 0, (char *)entry); - - /* wheee... it's going... */ - for(timeout = 0; timeout < 10000; timeout++) { - if(cpu_callin_map[i]) - break; - udelay(200); - } - if(cpu_callin_map[i]) { - /* Another "Red Snapper". */ - __cpu_number_map[i] = i; - __cpu_logical_map[i] = i; - } else { - cpucount--; - printk("Processor %d is stuck.\n", i); - } - } - if(!(cpu_callin_map[i])) { - cpu_clear(i, cpu_present_map); - __cpu_number_map[i] = -1; + return 0; +} + +void __init smp4m_smp_done(void) +{ + int i, first; + int *prev; + + /* setup cpu list for irq rotation */ + first = 0; + prev = &first; + for (i = 0; i < NR_CPUS; i++) { + if (cpu_online(i)) { + *prev = i; + prev = &cpu_data(i).next; } } + *prev = first; local_flush_cache_all(); - if(cpucount == 0) { - printk("Error: only one Processor found.\n"); - cpu_present_map = cpumask_of_cpu(smp_processor_id()); - } else { - unsigned long bogosum = 0; - for_each_present_cpu(i) - bogosum += cpu_data(i).udelay_val; - printk("Total of %d Processors activated (%lu.%02lu BogoMIPS).\n", - cpucount + 1, - bogosum/(500000/HZ), - (bogosum/(5000/HZ))%100); - smp_activated = 1; - smp_num_cpus = cpucount + 1; - } /* Free unneeded trap tables */ - if (!cpu_isset(i, cpu_present_map)) { + if (!cpu_isset(1, cpu_present_map)) { ClearPageReserved(virt_to_page(trapbase_cpu1)); init_page_count(virt_to_page(trapbase_cpu1)); free_page((unsigned long)trapbase_cpu1); @@ -263,6 +233,9 @@ void __init smp4m_boot_cpus(void) */ void smp4m_irq_rotate(int cpu) { + int next = cpu_data(cpu).next; + if (next != cpu) + set_irq_udt(next); } /* Cross calls, in order to work efficiently and atomically do all @@ -289,7 +262,7 @@ void smp4m_message_pass(int target, int msg, unsigned long data, int wait) smp_cpu_in_msg[me]++; if(target == MSG_ALL_BUT_SELF || target == MSG_ALL) { - mask = cpu_present_map; + mask = cpu_online_map; if(target == MSG_ALL_BUT_SELF) cpu_clear(me, mask); for(i = 0; i < 4; i++) { @@ -314,8 +287,8 @@ static struct smp_funcall { unsigned long arg3; unsigned long arg4; unsigned long arg5; - unsigned long processors_in[NR_CPUS]; /* Set when ipi entered. */ - unsigned long processors_out[NR_CPUS]; /* Set when ipi exited. */ + unsigned long processors_in[SUN4M_NCPUS]; /* Set when ipi entered. */ + unsigned long processors_out[SUN4M_NCPUS]; /* Set when ipi exited. */ } ccall_info; static DEFINE_SPINLOCK(cross_call_lock); @@ -324,8 +297,7 @@ static DEFINE_SPINLOCK(cross_call_lock); void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5) { - if(smp_processors_ready) { - register int ncpus = smp_num_cpus; + register int ncpus = SUN4M_NCPUS; unsigned long flags; spin_lock_irqsave(&cross_call_lock, flags); @@ -340,7 +312,7 @@ void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, /* Init receive/complete mapping, plus fire the IPI's off. */ { - cpumask_t mask = cpu_present_map; + cpumask_t mask = cpu_online_map; register int i; cpu_clear(smp_processor_id(), mask); @@ -373,7 +345,6 @@ void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, } spin_unlock_irqrestore(&cross_call_lock, flags); - } } /* Running cross calls. */ diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index 27b0e0ba858..58c65cc8d0d 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -1302,7 +1302,12 @@ void __init srmmu_paging_init(void) flush_cache_all(); srmmu_set_ctable_ptr((unsigned long)srmmu_ctx_table_phys); +#ifdef CONFIG_SMP + /* Stop from hanging here... */ + local_flush_tlb_all(); +#else flush_tlb_all(); +#endif poke_srmmu(); #ifdef CONFIG_SUN_IO @@ -1419,6 +1424,7 @@ static void __init init_vac_layout(void) max_size = vac_cache_size; if(vac_line_size < min_line_size) min_line_size = vac_line_size; + //FIXME: cpus not contiguous!! cpu++; if (cpu >= NR_CPUS || !cpu_online(cpu)) break; diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 267afddf63c..d1e2fc56648 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -162,6 +162,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y if !ULTRA_HAS_POPULATION_COUNT + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index 3e31be494e5..afe0a7720a2 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -24,7 +24,7 @@ config DEBUG_BOOTMEM bool "Debug BOOTMEM initialization" config DEBUG_PAGEALLOC - bool "Page alloc debugging" + bool "Debug page memory allocations" depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND help Unmap pages from the kernel linear mapping after free_pages(). diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index f819a9663a8..900fb0b940d 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.16 -# Mon Mar 20 01:23:21 2006 +# Sun Mar 26 14:58:11 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -38,6 +38,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -53,10 +54,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -68,7 +65,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -76,6 +72,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLK_DEV_IO_TRACE=y # # IO Schedulers @@ -111,6 +108,8 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_US3_FREQ=m CONFIG_US2E_FREQ=m CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set @@ -128,7 +127,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_MEMORY_HOTPLUG=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y CONFIG_GENERIC_ISA_DMA=y CONFIG_SBUS=y CONFIG_SBUSCHAR=y @@ -136,7 +134,6 @@ CONFIG_SUN_AUXIO=y CONFIG_SUN_IO=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_DEBUG is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_COMPAT=y @@ -201,6 +198,8 @@ CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m @@ -213,10 +212,12 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m CONFIG_IP_DCCP_CCID3=m CONFIG_IP_DCCP_TFRC_LIB=m @@ -224,7 +225,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set -# CONFIG_IP_DCCP_UNLOAD_HACK is not set # # SCTP Configuration (EXPERIMENTAL) @@ -309,6 +309,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_UB=m # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y @@ -722,7 +723,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -808,10 +808,6 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -820,6 +816,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -901,10 +898,12 @@ CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_RTCTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -987,6 +986,7 @@ CONFIG_SND_SUN_CS4231=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1014,7 +1014,6 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -1058,15 +1057,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1194,7 +1184,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index b9a9ce70e55..ffc7309e9f2 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -6,9 +6,11 @@ #include <linux/config.h> #include <linux/kernel.h> #include <linux/kprobes.h> +#include <linux/module.h> #include <asm/kdebug.h> #include <asm/signal.h> #include <asm/cacheflush.h> +#include <asm/uaccess.h> /* We do not have hardware single-stepping on sparc64. * So we implement software single-stepping with breakpoint @@ -302,16 +304,68 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + const struct exception_table_entry *entry; + + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the tpc points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->tpc = (unsigned long)cur->addr; + regs->tnpc = kcb->kprobe_orig_tnpc; + regs->tstate = ((regs->tstate & ~TSTATE_PIL) | + kcb->kprobe_orig_tstate_pil); + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); + preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs, kcb); + entry = search_exception_tables(regs->tpc); + if (entry) { + regs->tpc = entry->fixup; + regs->tnpc = regs->tpc + 4; + return 1; + } - reset_current_kprobe(); - preempt_enable_no_resched(); + /* + * fixup_exception() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; } + return 0; } @@ -324,6 +378,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 1b6e2ade100..7dc28a48426 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1298,6 +1298,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) while (!cpu_find_by_instance(instance, NULL, &mid)) { if (mid != boot_cpu_id) { cpu_clear(mid, phys_cpu_present_map); + cpu_clear(mid, cpu_present_map); if (num_possible_cpus() <= max_cpus) break; } @@ -1332,8 +1333,10 @@ void __init smp_setup_cpu_possible_map(void) instance = 0; while (!cpu_find_by_instance(instance, NULL, &mid)) { - if (mid < NR_CPUS) + if (mid < NR_CPUS) { cpu_set(mid, phys_cpu_present_map); + cpu_set(mid, cpu_present_map); + } instance++; } } diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 9914a17651b..f5e8db1de76 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -175,11 +175,6 @@ EXPORT_SYMBOL(set_bit); EXPORT_SYMBOL(clear_bit); EXPORT_SYMBOL(change_bit); -/* Bit searching */ -EXPORT_SYMBOL(find_next_bit); -EXPORT_SYMBOL(find_next_zero_bit); -EXPORT_SYMBOL(find_next_zero_le_bit); - EXPORT_SYMBOL(ivector_table); EXPORT_SYMBOL(enable_irq); EXPORT_SYMBOL(disable_irq); @@ -279,18 +274,9 @@ EXPORT_SYMBOL(__prom_getsibling); /* sparc library symbols */ EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); EXPORT_SYMBOL(__strlen_user); EXPORT_SYMBOL(__strnlen_user); -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); EXPORT_SYMBOL(strpbrk); -EXPORT_SYMBOL(strstr); #ifdef CONFIG_SOLARIS_EMUL_MODULE EXPORT_SYMBOL(linux_sparc_syscall); @@ -324,7 +310,6 @@ EXPORT_SYMBOL(__memscan_zero); EXPORT_SYMBOL(__memscan_generic); EXPORT_SYMBOL(__memcmp); EXPORT_SYMBOL(__memset); -EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_nocheck); diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 0e41df02448..2e906bad56f 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -19,7 +19,6 @@ #include <linux/resource.h> #include <linux/times.h> #include <linux/utsname.h> -#include <linux/timex.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/sem.h> @@ -945,79 +944,6 @@ asmlinkage long compat_sys_sendfile64(int out_fd, int in_fd, return ret; } -/* Handle adjtimex compatibility. */ - -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - -extern int do_adjtimex(struct timex *); - -asmlinkage long sys32_adjtimex(struct timex32 __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if (get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if (put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - /* This is just a version for 32-bit applications which does * not force O_LARGEFILE on. */ diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index c3adb7ac167..3b250f2318f 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -63,7 +63,7 @@ sys_call_table32: /*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir .word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64 /*210*/ .word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, sys32_sysinfo - .word sys32_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, sys32_adjtimex + .word sys32_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex /*220*/ .word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid .word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16 /*230*/ .word sys32_select, compat_sys_time, sys_nis_syscall, compat_sys_stime, compat_sys_statfs64 diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 7d61f1bfd3d..e55b5c6ece0 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -641,23 +641,8 @@ static void __init set_system_time(void) mon = MSTK_REG_MONTH(mregs); year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) ); } else { - int i; - /* Dallas 12887 RTC chip. */ - /* Stolen from arch/i386/kernel/time.c, see there for - * credits and descriptive comments. - */ - for (i = 0; i < 1000000; i++) { - if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) - break; - udelay(10); - } - for (i = 0; i < 1000000; i++) { - if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) - break; - udelay(10); - } do { sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES); @@ -666,6 +651,7 @@ static void __init set_system_time(void) mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); } while (sec != CMOS_READ(RTC_SECONDS)); + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BCD_TO_BIN(sec); BCD_TO_BIN(min); diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index df612e4f75f..ff090bb9734 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -43,18 +43,19 @@ #include <linux/kmod.h> #endif -struct notifier_block *sparc64die_chain; -static DEFINE_SPINLOCK(die_notifier_lock); +ATOMIC_NOTIFIER_HEAD(sparc64die_chain); int register_die_notifier(struct notifier_block *nb) { - int err = 0; - unsigned long flags; - spin_lock_irqsave(&die_notifier_lock, flags); - err = notifier_chain_register(&sparc64die_chain, nb); - spin_unlock_irqrestore(&die_notifier_lock, flags); - return err; + return atomic_notifier_chain_register(&sparc64die_chain, nb); } +EXPORT_SYMBOL(register_die_notifier); + +int unregister_die_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&sparc64die_chain, nb); +} +EXPORT_SYMBOL(unregister_die_notifier); /* When an irrecoverable trap occurs at tl > 0, the trap entry * code logs the trap state registers at every level in the trap diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index 8812ded19f0..4a725d8985f 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -14,6 +14,6 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ NGmemcpy.o NGcopy_from_user.o NGcopy_to_user.o NGpatch.o \ NGpage.o NGbzero.o \ copy_in_user.o user_fixup.o memmove.o \ - mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o + mcount.o ipcsum.o rwsem.o xor.o delay.o obj-y += iomap.o diff --git a/arch/sparc64/lib/find_bit.c b/arch/sparc64/lib/find_bit.c deleted file mode 100644 index 6059557067b..00000000000 --- a/arch/sparc64/lib/find_bit.c +++ /dev/null @@ -1,127 +0,0 @@ -#include <linux/bitops.h> - -/** - * find_next_bit - find the next set bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -unsigned long find_next_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) -{ - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if (offset) { - tmp = *(p++); - tmp &= (~0UL << offset); - if (size < 64) - goto found_first; - if (tmp) - goto found_middle; - size -= 64; - result += 64; - } - while (size & ~63UL) { - if ((tmp = *(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if (!size) - return result; - tmp = *p; - -found_first: - tmp &= (~0UL >> (64 - size)); - if (tmp == 0UL) /* Are any bits set? */ - return result + size; /* Nope. */ -found_middle: - return result + __ffs(tmp); -} - -/* find_next_zero_bit() finds the first zero bit in a bit string of length - * 'size' bits, starting the search at bit 'offset'. This is largely based - * on Linus's ALPHA routines, which are pretty portable BTW. - */ - -unsigned long find_next_zero_bit(const unsigned long *addr, - unsigned long size, unsigned long offset) -{ - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if (offset) { - tmp = *(p++); - tmp |= ~0UL >> (64-offset); - if (size < 64) - goto found_first; - if (~tmp) - goto found_middle; - size -= 64; - result += 64; - } - while (size & ~63UL) { - if (~(tmp = *(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if (!size) - return result; - tmp = *p; - -found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* Are any bits zero? */ - return result + size; /* Nope. */ -found_middle: - return result + ffz(tmp); -} - -unsigned long find_next_zero_le_bit(unsigned long *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if(offset) { - tmp = __swab64p(p++); - tmp |= (~0UL >> (64-offset)); - if(size < 64) - goto found_first; - if(~tmp) - goto found_middle; - size -= 64; - result += 64; - } - while(size & ~63) { - if(~(tmp = __swab64p(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if(!size) - return result; - tmp = __swab64p(p); -found_first: - tmp |= (~0UL << size); - if (tmp == ~0UL) /* Are any bits zero? */ - return result + size; /* Nope. */ -found_middle: - return result + ffz(tmp); -} diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index d21ff3230c0..0db2f7d9fab 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -413,12 +413,12 @@ good_area: #ifdef CONFIG_HUGETLB_PAGE mm_rss -= (mm->context.huge_pte_count * (HPAGE_SIZE / PAGE_SIZE)); #endif - if (unlikely(mm_rss >= + if (unlikely(mm_rss > mm->context.tsb_block[MM_TSB_BASE].tsb_rss_limit)) tsb_grow(mm, MM_TSB_BASE, mm_rss); #ifdef CONFIG_HUGETLB_PAGE mm_rss = mm->context.huge_pte_count; - if (unlikely(mm_rss >= + if (unlikely(mm_rss > mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) tsb_grow(mm, MM_TSB_HUGE, mm_rss); #endif diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index ef79ed25aec..85e6a55b3b5 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -52,3 +52,8 @@ config ARCH_HAS_SC_SIGNALS config ARCH_REUSE_HOST_VSYSCALL_AREA bool default y + +config GENERIC_HWEIGHT + bool + default y + diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64 index aae19bc4b06..f60e9e50642 100644 --- a/arch/um/Kconfig.x86_64 +++ b/arch/um/Kconfig.x86_64 @@ -46,3 +46,8 @@ config ARCH_REUSE_HOST_VSYSCALL_AREA config SMP_BROKEN bool default y + +config GENERIC_HWEIGHT + bool + default y + diff --git a/arch/um/Makefile b/arch/um/Makefile index c58b657f009..8d14c7a831b 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -1,4 +1,7 @@ -# +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # Copyright (C) 2002 Jeff Dike (jdike@karaya.com) # Licensed under the GPL # @@ -88,7 +91,7 @@ CONFIG_KERNEL_HALF_GIGS ?= 0 SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000) -.PHONY: linux +PHONY += linux all: linux diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 54388d10bcf..1488816588e 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -762,7 +762,8 @@ static struct notifier_block panic_exit_notifier = { static int add_notifier(void) { - notifier_chain_register(&panic_notifier_list, &panic_exit_notifier); + atomic_notifier_chain_register(&panic_notifier_list, + &panic_exit_notifier); return(0); } diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index fa617e0719a..0336575d244 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -71,7 +71,7 @@ struct io_thread_req { int error; }; -extern int open_ubd_file(char *file, struct openflags *openflags, +extern int open_ubd_file(char *file, struct openflags *openflags, int shared, char **backing_file_out, int *bitmap_offset_out, unsigned long *bitmap_len_out, int *data_offset_out, int *create_cow_out); @@ -137,7 +137,7 @@ static int fake_major = MAJOR_NR; static struct gendisk *ubd_gendisk[MAX_DEV]; static struct gendisk *fake_gendisk[MAX_DEV]; - + #ifdef CONFIG_BLK_DEV_UBD_SYNC #define OPEN_FLAGS ((struct openflags) { .r = 1, .w = 1, .s = 1, .c = 0, \ .cl = 1 }) @@ -168,6 +168,7 @@ struct ubd { __u64 size; struct openflags boot_openflags; struct openflags openflags; + int shared; int no_cow; struct cow cow; struct platform_device pdev; @@ -189,6 +190,7 @@ struct ubd { .boot_openflags = OPEN_FLAGS, \ .openflags = OPEN_FLAGS, \ .no_cow = 0, \ + .shared = 0, \ .cow = DEFAULT_COW, \ } @@ -305,7 +307,7 @@ static int ubd_setup_common(char *str, int *index_out) } major = simple_strtoul(str, &end, 0); if((*end != '\0') || (end == str)){ - printk(KERN_ERR + printk(KERN_ERR "ubd_setup : didn't parse major number\n"); return(1); } @@ -316,7 +318,7 @@ static int ubd_setup_common(char *str, int *index_out) printk(KERN_ERR "Can't assign a fake major twice\n"); goto out1; } - + fake_major = major; printk(KERN_INFO "Setting extra ubd major number to %d\n", @@ -351,7 +353,7 @@ static int ubd_setup_common(char *str, int *index_out) if (index_out) *index_out = n; - for (i = 0; i < 4; i++) { + for (i = 0; i < sizeof("rscd="); i++) { switch (*str) { case 'r': flags.w = 0; @@ -362,11 +364,14 @@ static int ubd_setup_common(char *str, int *index_out) case 'd': dev->no_cow = 1; break; + case 'c': + dev->shared = 1; + break; case '=': str++; goto break_loop; default: - printk(KERN_ERR "ubd_setup : Expected '=' or flag letter (r,s or d)\n"); + printk(KERN_ERR "ubd_setup : Expected '=' or flag letter (r, s, c, or d)\n"); goto out; } str++; @@ -515,7 +520,7 @@ static void ubd_handler(void) spin_unlock(&ubd_io_lock); return; } - + ubd_finish(rq, req.error); reactivate_fd(thread_fd, UBD_IRQ); do_ubd_request(ubd_queue); @@ -532,7 +537,7 @@ static int io_pid = -1; void kill_io_thread(void) { - if(io_pid != -1) + if(io_pid != -1) os_kill_process(io_pid, 1); } @@ -567,14 +572,15 @@ static int ubd_open_dev(struct ubd *dev) create_cow = 0; create_ptr = (dev->cow.file != NULL) ? &create_cow : NULL; back_ptr = dev->no_cow ? NULL : &dev->cow.file; - dev->fd = open_ubd_file(dev->file, &dev->openflags, back_ptr, - &dev->cow.bitmap_offset, &dev->cow.bitmap_len, - &dev->cow.data_offset, create_ptr); + dev->fd = open_ubd_file(dev->file, &dev->openflags, dev->shared, + back_ptr, &dev->cow.bitmap_offset, + &dev->cow.bitmap_len, &dev->cow.data_offset, + create_ptr); if((dev->fd == -ENOENT) && create_cow){ - dev->fd = create_cow_file(dev->file, dev->cow.file, + dev->fd = create_cow_file(dev->file, dev->cow.file, dev->openflags, 1 << 9, PAGE_SIZE, - &dev->cow.bitmap_offset, + &dev->cow.bitmap_offset, &dev->cow.bitmap_len, &dev->cow.data_offset); if(dev->fd >= 0){ @@ -598,16 +604,16 @@ static int ubd_open_dev(struct ubd *dev) } flush_tlb_kernel_vm(); - err = read_cow_bitmap(dev->fd, dev->cow.bitmap, - dev->cow.bitmap_offset, + err = read_cow_bitmap(dev->fd, dev->cow.bitmap, + dev->cow.bitmap_offset, dev->cow.bitmap_len); if(err < 0) goto error; flags = dev->openflags; flags.w = 0; - err = open_ubd_file(dev->cow.file, &flags, NULL, NULL, NULL, - NULL, NULL); + err = open_ubd_file(dev->cow.file, &flags, dev->shared, NULL, + NULL, NULL, NULL, NULL); if(err < 0) goto error; dev->cow.fd = err; } @@ -685,11 +691,11 @@ static int ubd_add(int n) dev->size = ROUND_BLOCK(dev->size); err = ubd_new_disk(MAJOR_NR, dev->size, n, &ubd_gendisk[n]); - if(err) + if(err) goto out_close; - + if(fake_major != MAJOR_NR) - ubd_new_disk(fake_major, dev->size, n, + ubd_new_disk(fake_major, dev->size, n, &fake_gendisk[n]); /* perhaps this should also be under the "if (fake_major)" above */ @@ -854,7 +860,7 @@ int ubd_init(void) return -1; } platform_driver_register(&ubd_driver); - for (i = 0; i < MAX_DEV; i++) + for (i = 0; i < MAX_DEV; i++) ubd_add(i); return 0; } @@ -872,16 +878,16 @@ int ubd_driver_init(void){ * enough. So use anyway the io thread. */ } stack = alloc_stack(0, 0); - io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), + io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), &thread_fd); if(io_pid < 0){ - printk(KERN_ERR + printk(KERN_ERR "ubd : Failed to start I/O thread (errno = %d) - " "falling back to synchronous I/O\n", -io_pid); io_pid = -1; return(0); } - err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, + err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, SA_INTERRUPT, "ubd", ubd_dev); if(err != 0) printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err); @@ -978,7 +984,7 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, if(req->op == UBD_READ) { for(i = 0; i < req->length >> 9; i++){ if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) - ubd_set_bit(i, (unsigned char *) + ubd_set_bit(i, (unsigned char *) &req->sector_mask); } } @@ -999,7 +1005,7 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) /* This should be impossible now */ if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ - printk("Write attempted on readonly ubd device %s\n", + printk("Write attempted on readonly ubd device %s\n", disk->disk_name); end_request(req, 0); return(1); @@ -1182,7 +1188,7 @@ int read_cow_bitmap(int fd, void *buf, int offset, int len) return(0); } -int open_ubd_file(char *file, struct openflags *openflags, +int open_ubd_file(char *file, struct openflags *openflags, int shared, char **backing_file_out, int *bitmap_offset_out, unsigned long *bitmap_len_out, int *data_offset_out, int *create_cow_out) @@ -1206,10 +1212,14 @@ int open_ubd_file(char *file, struct openflags *openflags, return fd; } - err = os_lock_file(fd, openflags->w); - if(err < 0){ - printk("Failed to lock '%s', err = %d\n", file, -err); - goto out_close; + if(shared) + printk("Not locking \"%s\" on the host\n", file); + else { + err = os_lock_file(fd, openflags->w); + if(err < 0){ + printk("Failed to lock '%s', err = %d\n", file, -err); + goto out_close; + } } /* Succesful return case! */ @@ -1260,7 +1270,7 @@ int create_cow_file(char *cow_file, char *backing_file, struct openflags flags, int err, fd; flags.c = 1; - fd = open_ubd_file(cow_file, &flags, NULL, NULL, NULL, NULL, NULL); + fd = open_ubd_file(cow_file, &flags, 0, NULL, NULL, NULL, NULL, NULL); if(fd < 0){ err = fd; printk("Open of COW file '%s' failed, errno = %d\n", cow_file, diff --git a/arch/um/include/irq_user.h b/arch/um/include/irq_user.h index b61deb8b362..69a93c804f0 100644 --- a/arch/um/include/irq_user.h +++ b/arch/um/include/irq_user.h @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -6,6 +6,17 @@ #ifndef __IRQ_USER_H__ #define __IRQ_USER_H__ +struct irq_fd { + struct irq_fd *next; + void *id; + int fd; + int type; + int irq; + int pid; + int events; + int current_events; +}; + enum { IRQ_READ, IRQ_WRITE }; extern void sigio_handler(int sig, union uml_pt_regs *regs); @@ -16,8 +27,6 @@ extern void reactivate_fd(int fd, int irqnum); extern void deactivate_fd(int fd, int irqnum); extern int deactivate_all_fds(void); extern void forward_interrupts(int pid); -extern void init_irq_signals(int on_sigstack); -extern void forward_ipi(int fd, int pid); extern int activate_ipi(int fd, int pid); extern unsigned long irq_lock(void); extern void irq_unlock(unsigned long flags); diff --git a/arch/um/include/kern.h b/arch/um/include/kern.h index 7d223beccbc..4ce3fc650e5 100644 --- a/arch/um/include/kern.h +++ b/arch/um/include/kern.h @@ -29,7 +29,7 @@ extern int getuid(void); extern int getgid(void); extern int pause(void); extern int write(int, const void *, int); -extern int exit(int); +extern void exit(int); extern int close(int); extern int read(unsigned int, char *, int); extern int pipe(int *); diff --git a/arch/um/include/misc_constants.h b/arch/um/include/misc_constants.h new file mode 100644 index 00000000000..989bc08de36 --- /dev/null +++ b/arch/um/include/misc_constants.h @@ -0,0 +1,6 @@ +#ifndef __MISC_CONSTANT_H_ +#define __MISC_CONSTANT_H_ + +#include <user_constants.h> + +#endif diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 2a1c64d8d0b..d3d1bc6074e 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -12,6 +12,7 @@ #include "sysdep/ptrace.h" #include "kern_util.h" #include "skas/mm_id.h" +#include "irq_user.h" #define OS_TYPE_FILE 1 #define OS_TYPE_DIR 2 @@ -121,6 +122,7 @@ static inline struct openflags of_cloexec(struct openflags flags) return(flags); } +/* file.c */ extern int os_stat_file(const char *file_name, struct uml_stat *buf); extern int os_stat_fd(const int fd, struct uml_stat *buf); extern int os_access(const char *file, int mode); @@ -156,10 +158,20 @@ extern int os_connect_socket(char *name); extern int os_file_type(char *file); extern int os_file_mode(char *file, struct openflags *mode_out); extern int os_lock_file(int fd, int excl); +extern void os_flush_stdout(void); +extern int os_stat_filesystem(char *path, long *bsize_out, + long long *blocks_out, long long *bfree_out, + long long *bavail_out, long long *files_out, + long long *ffree_out, void *fsid_out, + int fsid_size, long *namelen_out, + long *spare_out); +extern int os_change_dir(char *dir); +extern int os_fchange_dir(int fd); /* start_up.c */ extern void os_early_checks(void); extern int can_do_skas(void); +extern void os_check_bugs(void); /* Make sure they are clear when running in TT mode. Required by * SEGV_MAYBE_FIXABLE */ @@ -198,6 +210,8 @@ extern void os_flush_stdout(void); /* tt.c * for tt mode only (will be deleted in future...) */ +extern void forward_ipi(int fd, int pid); +extern void kill_child_dead(int pid); extern void stop(void); extern int wait_for_stop(int pid, int sig, int cont_type, void *relay); extern int protect_memory(unsigned long addr, unsigned long len, @@ -294,4 +308,26 @@ extern void initial_thread_cb_skas(void (*proc)(void *), extern void halt_skas(void); extern void reboot_skas(void); +/* irq.c */ +extern int os_waiting_for_events(struct irq_fd *active_fds); +extern int os_isatty(int fd); +extern int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds); +extern void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg, + struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2); +extern void os_free_irq_later(struct irq_fd *active_fds, + int irq, void *dev_id); +extern int os_get_pollfd(int i); +extern void os_set_pollfd(int i, int fd); +extern void os_set_ioignore(void); +extern void init_irq_signals(int on_sigstack); + +/* sigio.c */ +extern void write_sigio_workaround(void); +extern int add_sigio_fd(int fd, int read); +extern int ignore_sigio_fd(int fd); + +/* skas/trap */ +extern void sig_handler_common_skas(int sig, void *sc_ptr); +extern void user_signal(int sig, union uml_pt_regs *regs, int pid); + #endif diff --git a/arch/um/include/sigio.h b/arch/um/include/sigio.h index 37d76e29a14..fe99ea163c2 100644 --- a/arch/um/include/sigio.h +++ b/arch/um/include/sigio.h @@ -8,9 +8,6 @@ extern int write_sigio_irq(int fd); extern int register_sigio_fd(int fd); -extern int read_sigio_fd(int fd); -extern int add_sigio_fd(int fd, int read); -extern int ignore_sigio_fd(int fd); extern void sigio_lock(void); extern void sigio_unlock(void); diff --git a/arch/um/include/skas/mode-skas.h b/arch/um/include/skas/mode-skas.h index 260065cfeef..8bc6916bbbb 100644 --- a/arch/um/include/skas/mode-skas.h +++ b/arch/um/include/skas/mode-skas.h @@ -13,7 +13,6 @@ extern unsigned long exec_fp_regs[]; extern unsigned long exec_fpx_regs[]; extern int have_fpx_regs; -extern void sig_handler_common_skas(int sig, void *sc_ptr); extern void kill_off_processes_skas(void); #endif diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h index 86357282d68..853b26f148c 100644 --- a/arch/um/include/skas/skas.h +++ b/arch/um/include/skas/skas.h @@ -17,7 +17,6 @@ extern int user_thread(unsigned long stack, int flags); extern void new_thread_proc(void *stack, void (*handler)(int sig)); extern void new_thread_handler(int sig); extern void handle_syscall(union uml_pt_regs *regs); -extern void user_signal(int sig, union uml_pt_regs *regs, int pid); extern int new_mm(unsigned long stack); extern void get_skas_faultinfo(int pid, struct faultinfo * fi); extern long execute_syscall_skas(void *r); diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h index a6f1f176cf8..992a7e1e0fc 100644 --- a/arch/um/include/user_util.h +++ b/arch/um/include/user_util.h @@ -58,7 +58,6 @@ extern int attach(int pid); extern void kill_child_dead(int pid); extern int cont(int pid); extern void check_sigio(void); -extern void write_sigio_workaround(void); extern void arch_check_bugs(void); extern int cpu_feature(char *what, char *buf, int len); extern int arch_handle_signal(int sig, union uml_pt_regs *regs); diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 693018ba80f..fe08971b64c 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,23 +7,20 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec_kern.o exitcode.o \ - init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \ - process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ + init_task.o irq.o ksyms.o mem.o physmem.o \ + process_kern.o ptrace.o reboot.o resource.o sigio_kern.o \ signal_kern.o smp.o syscall_kern.o sysrq.o \ time_kern.o tlb.o trap_kern.o uaccess.o um_arch.o umid.o obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o obj-$(CONFIG_GPROF) += gprof_syms.o obj-$(CONFIG_GCOV) += gmon_syms.o -obj-$(CONFIG_TTY_LOG) += tty_log.o obj-$(CONFIG_SYSCALL_DEBUG) += syscall.o obj-$(CONFIG_MODE_TT) += tt/ obj-$(CONFIG_MODE_SKAS) += skas/ -user-objs-$(CONFIG_TTY_LOG) += tty_log.o - -USER_OBJS := $(user-objs-y) config.o tty_log.o +USER_OBJS := config.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c index c264e1c05ab..1ca84319317 100644 --- a/arch/um/kernel/exec_kern.c +++ b/arch/um/kernel/exec_kern.c @@ -30,8 +30,6 @@ void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp) CHOOSE_MODE_PROC(start_thread_tt, start_thread_skas, regs, eip, esp); } -extern void log_exec(char **argv, void *tty); - static long execve1(char *file, char __user * __user *argv, char __user *__user *env) { diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index bbf94bf2921..c39ea3abeda 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -31,6 +31,8 @@ #include "irq_user.h" #include "irq_kern.h" #include "os.h" +#include "sigio.h" +#include "misc_constants.h" /* * Generic, controller-independent functions: @@ -77,6 +79,298 @@ skip: return 0; } +struct irq_fd *active_fds = NULL; +static struct irq_fd **last_irq_ptr = &active_fds; + +extern void free_irqs(void); + +void sigio_handler(int sig, union uml_pt_regs *regs) +{ + struct irq_fd *irq_fd; + int n; + + if(smp_sigio_handler()) return; + while(1){ + n = os_waiting_for_events(active_fds); + if (n <= 0) { + if(n == -EINTR) continue; + else break; + } + + for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ + if(irq_fd->current_events != 0){ + irq_fd->current_events = 0; + do_IRQ(irq_fd->irq, regs); + } + } + } + + free_irqs(); +} + +static void maybe_sigio_broken(int fd, int type) +{ + if(os_isatty(fd)){ + if((type == IRQ_WRITE) && !pty_output_sigio){ + write_sigio_workaround(); + add_sigio_fd(fd, 0); + } + else if((type == IRQ_READ) && !pty_close_sigio){ + write_sigio_workaround(); + add_sigio_fd(fd, 1); + } + } +} + + +int activate_fd(int irq, int fd, int type, void *dev_id) +{ + struct pollfd *tmp_pfd; + struct irq_fd *new_fd, *irq_fd; + unsigned long flags; + int pid, events, err, n; + + pid = os_getpid(); + err = os_set_fd_async(fd, pid); + if(err < 0) + goto out; + + new_fd = um_kmalloc(sizeof(*new_fd)); + err = -ENOMEM; + if(new_fd == NULL) + goto out; + + if(type == IRQ_READ) events = UM_POLLIN | UM_POLLPRI; + else events = UM_POLLOUT; + *new_fd = ((struct irq_fd) { .next = NULL, + .id = dev_id, + .fd = fd, + .type = type, + .irq = irq, + .pid = pid, + .events = events, + .current_events = 0 } ); + + /* Critical section - locked by a spinlock because this stuff can + * be changed from interrupt handlers. The stuff above is done + * outside the lock because it allocates memory. + */ + + /* Actually, it only looks like it can be called from interrupt + * context. The culprit is reactivate_fd, which calls + * maybe_sigio_broken, which calls write_sigio_workaround, + * which calls activate_fd. However, write_sigio_workaround should + * only be called once, at boot time. That would make it clear that + * this is called only from process context, and can be locked with + * a semaphore. + */ + flags = irq_lock(); + for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ + if((irq_fd->fd == fd) && (irq_fd->type == type)){ + printk("Registering fd %d twice\n", fd); + printk("Irqs : %d, %d\n", irq_fd->irq, irq); + printk("Ids : 0x%p, 0x%p\n", irq_fd->id, dev_id); + goto out_unlock; + } + } + + /*-------------*/ + if(type == IRQ_WRITE) + fd = -1; + + tmp_pfd = NULL; + n = 0; + + while(1){ + n = os_create_pollfd(fd, events, tmp_pfd, n); + if (n == 0) + break; + + /* n > 0 + * It means we couldn't put new pollfd to current pollfds + * and tmp_fds is NULL or too small for new pollfds array. + * Needed size is equal to n as minimum. + * + * Here we have to drop the lock in order to call + * kmalloc, which might sleep. + * If something else came in and changed the pollfds array + * so we will not be able to put new pollfd struct to pollfds + * then we free the buffer tmp_fds and try again. + */ + irq_unlock(flags); + if (tmp_pfd != NULL) { + kfree(tmp_pfd); + tmp_pfd = NULL; + } + + tmp_pfd = um_kmalloc(n); + if (tmp_pfd == NULL) + goto out_kfree; + + flags = irq_lock(); + } + /*-------------*/ + + *last_irq_ptr = new_fd; + last_irq_ptr = &new_fd->next; + + irq_unlock(flags); + + /* This calls activate_fd, so it has to be outside the critical + * section. + */ + maybe_sigio_broken(fd, type); + + return(0); + + out_unlock: + irq_unlock(flags); + out_kfree: + kfree(new_fd); + out: + return(err); +} + +static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg) +{ + unsigned long flags; + + flags = irq_lock(); + os_free_irq_by_cb(test, arg, active_fds, &last_irq_ptr); + irq_unlock(flags); +} + +struct irq_and_dev { + int irq; + void *dev; +}; + +static int same_irq_and_dev(struct irq_fd *irq, void *d) +{ + struct irq_and_dev *data = d; + + return((irq->irq == data->irq) && (irq->id == data->dev)); +} + +void free_irq_by_irq_and_dev(unsigned int irq, void *dev) +{ + struct irq_and_dev data = ((struct irq_and_dev) { .irq = irq, + .dev = dev }); + + free_irq_by_cb(same_irq_and_dev, &data); +} + +static int same_fd(struct irq_fd *irq, void *fd) +{ + return(irq->fd == *((int *) fd)); +} + +void free_irq_by_fd(int fd) +{ + free_irq_by_cb(same_fd, &fd); +} + +static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out) +{ + struct irq_fd *irq; + int i = 0; + int fdi; + + for(irq=active_fds; irq != NULL; irq = irq->next){ + if((irq->fd == fd) && (irq->irq == irqnum)) break; + i++; + } + if(irq == NULL){ + printk("find_irq_by_fd doesn't have descriptor %d\n", fd); + goto out; + } + fdi = os_get_pollfd(i); + if((fdi != -1) && (fdi != fd)){ + printk("find_irq_by_fd - mismatch between active_fds and " + "pollfds, fd %d vs %d, need %d\n", irq->fd, + fdi, fd); + irq = NULL; + goto out; + } + *index_out = i; + out: + return(irq); +} + +void reactivate_fd(int fd, int irqnum) +{ + struct irq_fd *irq; + unsigned long flags; + int i; + + flags = irq_lock(); + irq = find_irq_by_fd(fd, irqnum, &i); + if(irq == NULL){ + irq_unlock(flags); + return; + } + os_set_pollfd(i, irq->fd); + irq_unlock(flags); + + /* This calls activate_fd, so it has to be outside the critical + * section. + */ + maybe_sigio_broken(fd, irq->type); +} + +void deactivate_fd(int fd, int irqnum) +{ + struct irq_fd *irq; + unsigned long flags; + int i; + + flags = irq_lock(); + irq = find_irq_by_fd(fd, irqnum, &i); + if(irq == NULL) + goto out; + os_set_pollfd(i, -1); + out: + irq_unlock(flags); +} + +int deactivate_all_fds(void) +{ + struct irq_fd *irq; + int err; + + for(irq=active_fds;irq != NULL;irq = irq->next){ + err = os_clear_fd_async(irq->fd); + if(err) + return(err); + } + /* If there is a signal already queued, after unblocking ignore it */ + os_set_ioignore(); + + return(0); +} + +void forward_interrupts(int pid) +{ + struct irq_fd *irq; + unsigned long flags; + int err; + + flags = irq_lock(); + for(irq=active_fds;irq != NULL;irq = irq->next){ + err = os_set_owner(irq->fd, pid); + if(err < 0){ + /* XXX Just remove the irq rather than + * print out an infinite stream of these + */ + printk("Failed to forward %d to pid %d, err = %d\n", + irq->fd, pid, -err); + } + + irq->pid = pid; + } + irq_unlock(flags); +} + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific diff --git a/arch/um/kernel/irq_user.c b/arch/um/kernel/irq_user.c deleted file mode 100644 index 0e32f5f4a88..00000000000 --- a/arch/um/kernel/irq_user.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <stdlib.h> -#include <unistd.h> -#include <errno.h> -#include <signal.h> -#include <string.h> -#include <sys/poll.h> -#include <sys/types.h> -#include <sys/time.h> -#include "user_util.h" -#include "kern_util.h" -#include "user.h" -#include "process.h" -#include "sigio.h" -#include "irq_user.h" -#include "os.h" - -struct irq_fd { - struct irq_fd *next; - void *id; - int fd; - int type; - int irq; - int pid; - int events; - int current_events; -}; - -static struct irq_fd *active_fds = NULL; -static struct irq_fd **last_irq_ptr = &active_fds; - -static struct pollfd *pollfds = NULL; -static int pollfds_num = 0; -static int pollfds_size = 0; - -extern int io_count, intr_count; - -extern void free_irqs(void); - -void sigio_handler(int sig, union uml_pt_regs *regs) -{ - struct irq_fd *irq_fd; - int i, n; - - if(smp_sigio_handler()) return; - while(1){ - n = poll(pollfds, pollfds_num, 0); - if(n < 0){ - if(errno == EINTR) continue; - printk("sigio_handler : poll returned %d, " - "errno = %d\n", n, errno); - break; - } - if(n == 0) break; - - irq_fd = active_fds; - for(i = 0; i < pollfds_num; i++){ - if(pollfds[i].revents != 0){ - irq_fd->current_events = pollfds[i].revents; - pollfds[i].fd = -1; - } - irq_fd = irq_fd->next; - } - - for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ - if(irq_fd->current_events != 0){ - irq_fd->current_events = 0; - do_IRQ(irq_fd->irq, regs); - } - } - } - - free_irqs(); -} - -int activate_ipi(int fd, int pid) -{ - return(os_set_fd_async(fd, pid)); -} - -static void maybe_sigio_broken(int fd, int type) -{ - if(isatty(fd)){ - if((type == IRQ_WRITE) && !pty_output_sigio){ - write_sigio_workaround(); - add_sigio_fd(fd, 0); - } - else if((type == IRQ_READ) && !pty_close_sigio){ - write_sigio_workaround(); - add_sigio_fd(fd, 1); - } - } -} - -int activate_fd(int irq, int fd, int type, void *dev_id) -{ - struct pollfd *tmp_pfd; - struct irq_fd *new_fd, *irq_fd; - unsigned long flags; - int pid, events, err, n, size; - - pid = os_getpid(); - err = os_set_fd_async(fd, pid); - if(err < 0) - goto out; - - new_fd = um_kmalloc(sizeof(*new_fd)); - err = -ENOMEM; - if(new_fd == NULL) - goto out; - - if(type == IRQ_READ) events = POLLIN | POLLPRI; - else events = POLLOUT; - *new_fd = ((struct irq_fd) { .next = NULL, - .id = dev_id, - .fd = fd, - .type = type, - .irq = irq, - .pid = pid, - .events = events, - .current_events = 0 } ); - - /* Critical section - locked by a spinlock because this stuff can - * be changed from interrupt handlers. The stuff above is done - * outside the lock because it allocates memory. - */ - - /* Actually, it only looks like it can be called from interrupt - * context. The culprit is reactivate_fd, which calls - * maybe_sigio_broken, which calls write_sigio_workaround, - * which calls activate_fd. However, write_sigio_workaround should - * only be called once, at boot time. That would make it clear that - * this is called only from process context, and can be locked with - * a semaphore. - */ - flags = irq_lock(); - for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ - if((irq_fd->fd == fd) && (irq_fd->type == type)){ - printk("Registering fd %d twice\n", fd); - printk("Irqs : %d, %d\n", irq_fd->irq, irq); - printk("Ids : 0x%x, 0x%x\n", irq_fd->id, dev_id); - goto out_unlock; - } - } - - n = pollfds_num; - if(n == pollfds_size){ - while(1){ - /* Here we have to drop the lock in order to call - * kmalloc, which might sleep. If something else - * came in and changed the pollfds array, we free - * the buffer and try again. - */ - irq_unlock(flags); - size = (pollfds_num + 1) * sizeof(pollfds[0]); - tmp_pfd = um_kmalloc(size); - flags = irq_lock(); - if(tmp_pfd == NULL) - goto out_unlock; - if(n == pollfds_size) - break; - kfree(tmp_pfd); - } - if(pollfds != NULL){ - memcpy(tmp_pfd, pollfds, - sizeof(pollfds[0]) * pollfds_size); - kfree(pollfds); - } - pollfds = tmp_pfd; - pollfds_size++; - } - - if(type == IRQ_WRITE) - fd = -1; - - pollfds[pollfds_num] = ((struct pollfd) { .fd = fd, - .events = events, - .revents = 0 }); - pollfds_num++; - - *last_irq_ptr = new_fd; - last_irq_ptr = &new_fd->next; - - irq_unlock(flags); - - /* This calls activate_fd, so it has to be outside the critical - * section. - */ - maybe_sigio_broken(fd, type); - - return(0); - - out_unlock: - irq_unlock(flags); - kfree(new_fd); - out: - return(err); -} - -static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg) -{ - struct irq_fd **prev; - unsigned long flags; - int i = 0; - - flags = irq_lock(); - prev = &active_fds; - while(*prev != NULL){ - if((*test)(*prev, arg)){ - struct irq_fd *old_fd = *prev; - if((pollfds[i].fd != -1) && - (pollfds[i].fd != (*prev)->fd)){ - printk("free_irq_by_cb - mismatch between " - "active_fds and pollfds, fd %d vs %d\n", - (*prev)->fd, pollfds[i].fd); - goto out; - } - - pollfds_num--; - - /* This moves the *whole* array after pollfds[i] (though - * it doesn't spot as such)! */ - - memmove(&pollfds[i], &pollfds[i + 1], - (pollfds_num - i) * sizeof(pollfds[0])); - - if(last_irq_ptr == &old_fd->next) - last_irq_ptr = prev; - *prev = (*prev)->next; - if(old_fd->type == IRQ_WRITE) - ignore_sigio_fd(old_fd->fd); - kfree(old_fd); - continue; - } - prev = &(*prev)->next; - i++; - } - out: - irq_unlock(flags); -} - -struct irq_and_dev { - int irq; - void *dev; -}; - -static int same_irq_and_dev(struct irq_fd *irq, void *d) -{ - struct irq_and_dev *data = d; - - return((irq->irq == data->irq) && (irq->id == data->dev)); -} - -void free_irq_by_irq_and_dev(unsigned int irq, void *dev) -{ - struct irq_and_dev data = ((struct irq_and_dev) { .irq = irq, - .dev = dev }); - - free_irq_by_cb(same_irq_and_dev, &data); -} - -static int same_fd(struct irq_fd *irq, void *fd) -{ - return(irq->fd == *((int *) fd)); -} - -void free_irq_by_fd(int fd) -{ - free_irq_by_cb(same_fd, &fd); -} - -static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out) -{ - struct irq_fd *irq; - int i = 0; - - for(irq=active_fds; irq != NULL; irq = irq->next){ - if((irq->fd == fd) && (irq->irq == irqnum)) break; - i++; - } - if(irq == NULL){ - printk("find_irq_by_fd doesn't have descriptor %d\n", fd); - goto out; - } - if((pollfds[i].fd != -1) && (pollfds[i].fd != fd)){ - printk("find_irq_by_fd - mismatch between active_fds and " - "pollfds, fd %d vs %d, need %d\n", irq->fd, - pollfds[i].fd, fd); - irq = NULL; - goto out; - } - *index_out = i; - out: - return(irq); -} - -void reactivate_fd(int fd, int irqnum) -{ - struct irq_fd *irq; - unsigned long flags; - int i; - - flags = irq_lock(); - irq = find_irq_by_fd(fd, irqnum, &i); - if(irq == NULL){ - irq_unlock(flags); - return; - } - - pollfds[i].fd = irq->fd; - - irq_unlock(flags); - - /* This calls activate_fd, so it has to be outside the critical - * section. - */ - maybe_sigio_broken(fd, irq->type); -} - -void deactivate_fd(int fd, int irqnum) -{ - struct irq_fd *irq; - unsigned long flags; - int i; - - flags = irq_lock(); - irq = find_irq_by_fd(fd, irqnum, &i); - if(irq == NULL) - goto out; - pollfds[i].fd = -1; - out: - irq_unlock(flags); -} - -int deactivate_all_fds(void) -{ - struct irq_fd *irq; - int err; - - for(irq=active_fds;irq != NULL;irq = irq->next){ - err = os_clear_fd_async(irq->fd); - if(err) - return(err); - } - /* If there is a signal already queued, after unblocking ignore it */ - set_handler(SIGIO, SIG_IGN, 0, -1); - - return(0); -} - -void forward_ipi(int fd, int pid) -{ - int err; - - err = os_set_owner(fd, pid); - if(err < 0) - printk("forward_ipi: set_owner failed, fd = %d, me = %d, " - "target = %d, err = %d\n", fd, os_getpid(), pid, -err); -} - -void forward_interrupts(int pid) -{ - struct irq_fd *irq; - unsigned long flags; - int err; - - flags = irq_lock(); - for(irq=active_fds;irq != NULL;irq = irq->next){ - err = os_set_owner(irq->fd, pid); - if(err < 0){ - /* XXX Just remove the irq rather than - * print out an infinite stream of these - */ - printk("Failed to forward %d to pid %d, err = %d\n", - irq->fd, pid, -err); - } - - irq->pid = pid; - } - irq_unlock(flags); -} - -void init_irq_signals(int on_sigstack) -{ - __sighandler_t h; - int flags; - - flags = on_sigstack ? SA_ONSTACK : 0; - if(timer_irq_inited) h = (__sighandler_t) alarm_handler; - else h = boot_timer_handler; - - set_handler(SIGVTALRM, h, flags | SA_RESTART, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1); - set_handler(SIGIO, (__sighandler_t) sig_handler, flags | SA_RESTART, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); - signal(SIGWINCH, SIG_IGN); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index 0e65340eee3..0500800df1c 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -9,6 +9,7 @@ #include "linux/vmalloc.h" #include "linux/bootmem.h" #include "linux/module.h" +#include "linux/pfn.h" #include "asm/types.h" #include "asm/pgtable.h" #include "kern_util.h" @@ -316,8 +317,6 @@ void map_memory(unsigned long virt, unsigned long phys, unsigned long len, } } -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) - extern int __syscall_stub_start, __binary_start; void setup_physmem(unsigned long start, unsigned long reserve_end, diff --git a/arch/um/kernel/sigio_kern.c b/arch/um/kernel/sigio_kern.c index 229988463c4..1c1300fb1e9 100644 --- a/arch/um/kernel/sigio_kern.c +++ b/arch/um/kernel/sigio_kern.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com) * Licensed under the GPL */ @@ -12,13 +12,16 @@ #include "sigio.h" #include "irq_user.h" #include "irq_kern.h" +#include "os.h" /* Protected by sigio_lock() called from write_sigio_workaround */ static int sigio_irq_fd = -1; static irqreturn_t sigio_interrupt(int irq, void *data, struct pt_regs *unused) { - read_sigio_fd(sigio_irq_fd); + char c; + + os_read_file(sigio_irq_fd, &c, sizeof(c)); reactivate_fd(sigio_irq_fd, SIGIO_WRITE_IRQ); return(IRQ_HANDLED); } @@ -51,6 +54,9 @@ void sigio_unlock(void) spin_unlock(&sigio_spinlock); } +extern void sigio_cleanup(void); +__uml_exitcall(sigio_cleanup); + /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c index 72113b0a96e..511116aebaf 100644 --- a/arch/um/kernel/smp.c +++ b/arch/um/kernel/smp.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com) * Licensed under the GPL */ @@ -77,9 +77,9 @@ static int idle_proc(void *cpup) if(err < 0) panic("CPU#%d failed to create IPI pipe, err = %d", cpu, -err); - activate_ipi(cpu_data[cpu].ipi_pipe[0], + os_set_fd_async(cpu_data[cpu].ipi_pipe[0], current->thread.mode.tt.extern_pid); - + wmb(); if (cpu_test_and_set(cpu, cpu_callin_map)) { printk("huh, CPU#%d already present??\n", cpu); @@ -106,7 +106,7 @@ static struct task_struct *idle_thread(int cpu) panic("copy_process failed in idle_thread, error = %ld", PTR_ERR(new_task)); - cpu_tasks[cpu] = ((struct cpu_task) + cpu_tasks[cpu] = ((struct cpu_task) { .pid = new_task->thread.mode.tt.extern_pid, .task = new_task } ); idle_threads[cpu] = new_task; @@ -134,16 +134,15 @@ void smp_prepare_cpus(unsigned int maxcpus) if(err < 0) panic("CPU#0 failed to create IPI pipe, errno = %d", -err); - activate_ipi(cpu_data[me].ipi_pipe[0], + os_set_fd_async(cpu_data[me].ipi_pipe[0], current->thread.mode.tt.extern_pid); for(cpu = 1; cpu < ncpus; cpu++){ printk("Booting processor %d...\n", cpu); - + idle = idle_thread(cpu); init_idle(idle, cpu); - unhash_process(idle); waittime = 200000000; while (waittime-- && !cpu_isset(cpu, cpu_callin_map)) @@ -223,7 +222,7 @@ void smp_call_function_slave(int cpu) atomic_inc(&scf_finished); } -int smp_call_function(void (*_func)(void *info), void *_info, int nonatomic, +int smp_call_function(void (*_func)(void *info), void *_info, int nonatomic, int wait) { int cpus = num_online_cpus() - 1; diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 80c9c18aae9..7d51dd7201c 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -421,7 +421,7 @@ int linux_main(int argc, char **argv) #ifndef CONFIG_HIGHMEM highmem = 0; printf("CONFIG_HIGHMEM not enabled - physical memory shrunk " - "to %lu bytes\n", physmem_size); + "to %Lu bytes\n", physmem_size); #endif } @@ -433,8 +433,8 @@ int linux_main(int argc, char **argv) setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem); if(init_maps(physmem_size, iomem_size, highmem)){ - printf("Failed to allocate mem_map for %lu bytes of physical " - "memory and %lu bytes of highmem\n", physmem_size, + printf("Failed to allocate mem_map for %Lu bytes of physical " + "memory and %Lu bytes of highmem\n", physmem_size, highmem); exit(1); } @@ -477,7 +477,8 @@ static struct notifier_block panic_exit_notifier = { void __init setup_arch(char **cmdline_p) { - notifier_chain_register(&panic_notifier_list, &panic_exit_notifier); + atomic_notifier_chain_register(&panic_notifier_list, + &panic_exit_notifier); paging_init(); strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; @@ -487,8 +488,7 @@ void __init setup_arch(char **cmdline_p) void __init check_bugs(void) { arch_check_bugs(); - check_sigio(); - check_devanon(); + os_check_bugs(); } void apply_alternatives(struct alt_instr *start, struct alt_instr *end) diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index 08a4e628b24..1659386b42b 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,14 +3,17 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ - start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o user_syms.o \ - util.o drivers/ sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o sigio.o \ + signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o \ + user_syms.o util.o drivers/ sys-$(SUBARCH)/ obj-$(CONFIG_MODE_SKAS) += skas/ +obj-$(CONFIG_TTY_LOG) += tty_log.o +user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ - start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o util.o +USER_OBJS := $(user-objs-y) aio.o elf_aux.o file.o helper.o irq.o main.o mem.o \ + process.o sigio.o signal.o start_up.o time.o trap.o tt.o tty.o \ + uaccess.o umid.o util.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c new file mode 100644 index 00000000000..e599be423da --- /dev/null +++ b/arch/um/os-Linux/irq.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include <stdlib.h> +#include <unistd.h> +#include <errno.h> +#include <signal.h> +#include <string.h> +#include <sys/poll.h> +#include <sys/types.h> +#include <sys/time.h> +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "process.h" +#include "sigio.h" +#include "irq_user.h" +#include "os.h" + +static struct pollfd *pollfds = NULL; +static int pollfds_num = 0; +static int pollfds_size = 0; + +int os_waiting_for_events(struct irq_fd *active_fds) +{ + struct irq_fd *irq_fd; + int i, n, err; + + n = poll(pollfds, pollfds_num, 0); + if(n < 0){ + err = -errno; + if(errno != EINTR) + printk("sigio_handler: os_waiting_for_events:" + " poll returned %d, errno = %d\n", n, errno); + return err; + } + + if(n == 0) + return 0; + + irq_fd = active_fds; + + for(i = 0; i < pollfds_num; i++){ + if(pollfds[i].revents != 0){ + irq_fd->current_events = pollfds[i].revents; + pollfds[i].fd = -1; + } + irq_fd = irq_fd->next; + } + return n; +} + +int os_isatty(int fd) +{ + return(isatty(fd)); +} + +int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds) +{ + if (pollfds_num == pollfds_size) { + if (size_tmpfds <= pollfds_size * sizeof(pollfds[0])) { + /* return min size needed for new pollfds area */ + return((pollfds_size + 1) * sizeof(pollfds[0])); + } + + if(pollfds != NULL){ + memcpy(tmp_pfd, pollfds, + sizeof(pollfds[0]) * pollfds_size); + /* remove old pollfds */ + kfree(pollfds); + } + pollfds = tmp_pfd; + pollfds_size++; + } else { + /* remove not used tmp_pfd */ + if (tmp_pfd != NULL) + kfree(tmp_pfd); + } + + pollfds[pollfds_num] = ((struct pollfd) { .fd = fd, + .events = events, + .revents = 0 }); + pollfds_num++; + + return(0); +} + +void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg, + struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2) +{ + struct irq_fd **prev; + int i = 0; + + prev = &active_fds; + while(*prev != NULL){ + if((*test)(*prev, arg)){ + struct irq_fd *old_fd = *prev; + if((pollfds[i].fd != -1) && + (pollfds[i].fd != (*prev)->fd)){ + printk("os_free_irq_by_cb - mismatch between " + "active_fds and pollfds, fd %d vs %d\n", + (*prev)->fd, pollfds[i].fd); + goto out; + } + + pollfds_num--; + + /* This moves the *whole* array after pollfds[i] + * (though it doesn't spot as such)! + */ + + memmove(&pollfds[i], &pollfds[i + 1], + (pollfds_num - i) * sizeof(pollfds[0])); + if(*last_irq_ptr2 == &old_fd->next) + *last_irq_ptr2 = prev; + + *prev = (*prev)->next; + if(old_fd->type == IRQ_WRITE) + ignore_sigio_fd(old_fd->fd); + kfree(old_fd); + continue; + } + prev = &(*prev)->next; + i++; + } + out: + return; +} + + +int os_get_pollfd(int i) +{ + return(pollfds[i].fd); +} + +void os_set_pollfd(int i, int fd) +{ + pollfds[i].fd = fd; +} + +void os_set_ioignore(void) +{ + set_handler(SIGIO, SIG_IGN, 0, -1); +} + +void init_irq_signals(int on_sigstack) +{ + __sighandler_t h; + int flags; + + flags = on_sigstack ? SA_ONSTACK : 0; + if(timer_irq_inited) h = (__sighandler_t) alarm_handler; + else h = boot_timer_handler; + + set_handler(SIGVTALRM, h, flags | SA_RESTART, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1); + set_handler(SIGIO, (__sighandler_t) sig_handler, flags | SA_RESTART, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); + signal(SIGWINCH, SIG_IGN); +} diff --git a/arch/um/kernel/sigio_user.c b/arch/um/os-Linux/sigio.c index f7b18e157d3..9ba94294714 100644 --- a/arch/um/kernel/sigio_user.c +++ b/arch/um/os-Linux/sigio.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -20,128 +20,7 @@ #include "sigio.h" #include "os.h" -/* Changed during early boot */ -int pty_output_sigio = 0; -int pty_close_sigio = 0; - -/* Used as a flag during SIGIO testing early in boot */ -static volatile int got_sigio = 0; - -void __init handler(int sig) -{ - got_sigio = 1; -} - -struct openpty_arg { - int master; - int slave; - int err; -}; - -static void openpty_cb(void *arg) -{ - struct openpty_arg *info = arg; - - info->err = 0; - if(openpty(&info->master, &info->slave, NULL, NULL, NULL)) - info->err = -errno; -} - -void __init check_one_sigio(void (*proc)(int, int)) -{ - struct sigaction old, new; - struct openpty_arg pty = { .master = -1, .slave = -1 }; - int master, slave, err; - - initial_thread_cb(openpty_cb, &pty); - if(pty.err){ - printk("openpty failed, errno = %d\n", -pty.err); - return; - } - - master = pty.master; - slave = pty.slave; - - if((master == -1) || (slave == -1)){ - printk("openpty failed to allocate a pty\n"); - return; - } - - /* Not now, but complain so we now where we failed. */ - err = raw(master); - if (err < 0) - panic("check_sigio : __raw failed, errno = %d\n", -err); - - err = os_sigio_async(master, slave); - if(err < 0) - panic("tty_fds : sigio_async failed, err = %d\n", -err); - - if(sigaction(SIGIO, NULL, &old) < 0) - panic("check_sigio : sigaction 1 failed, errno = %d\n", errno); - new = old; - new.sa_handler = handler; - if(sigaction(SIGIO, &new, NULL) < 0) - panic("check_sigio : sigaction 2 failed, errno = %d\n", errno); - - got_sigio = 0; - (*proc)(master, slave); - - os_close_file(master); - os_close_file(slave); - - if(sigaction(SIGIO, &old, NULL) < 0) - panic("check_sigio : sigaction 3 failed, errno = %d\n", errno); -} - -static void tty_output(int master, int slave) -{ - int n; - char buf[512]; - - printk("Checking that host ptys support output SIGIO..."); - - memset(buf, 0, sizeof(buf)); - - while(os_write_file(master, buf, sizeof(buf)) > 0) ; - if(errno != EAGAIN) - panic("check_sigio : write failed, errno = %d\n", errno); - while(((n = os_read_file(slave, buf, sizeof(buf))) > 0) && !got_sigio) ; - - if (got_sigio) { - printk("Yes\n"); - pty_output_sigio = 1; - } else if (n == -EAGAIN) { - printk("No, enabling workaround\n"); - } else { - panic("check_sigio : read failed, err = %d\n", n); - } -} - -static void tty_close(int master, int slave) -{ - printk("Checking that host ptys support SIGIO on close..."); - - os_close_file(slave); - if(got_sigio){ - printk("Yes\n"); - pty_close_sigio = 1; - } - else printk("No, enabling workaround\n"); -} - -void __init check_sigio(void) -{ - if((os_access("/dev/ptmx", OS_ACC_R_OK) < 0) && - (os_access("/dev/ptyp0", OS_ACC_R_OK) < 0)){ - printk("No pseudo-terminals available - skipping pty SIGIO " - "check\n"); - return; - } - check_one_sigio(tty_output); - check_one_sigio(tty_close); -} - -/* Protected by sigio_lock(), also used by sigio_cleanup, which is an +/* Protected by sigio_lock(), also used by sigio_cleanup, which is an * exitcall. */ static int write_sigio_pid = -1; @@ -150,8 +29,10 @@ static int write_sigio_pid = -1; * the descriptors closed after it is killed. So, it can't see them change. * On the UML side, they are changed under the sigio_lock. */ -static int write_sigio_fds[2] = { -1, -1 }; -static int sigio_private[2] = { -1, -1 }; +#define SIGIO_FDS_INIT {-1, -1} + +static int write_sigio_fds[2] = SIGIO_FDS_INIT; +static int sigio_private[2] = SIGIO_FDS_INIT; struct pollfds { struct pollfd *poll; @@ -264,13 +145,13 @@ static void update_thread(void) return; fail: /* Critical section start */ - if(write_sigio_pid != -1) + if(write_sigio_pid != -1) os_kill_process(write_sigio_pid, 1); write_sigio_pid = -1; - os_close_file(sigio_private[0]); - os_close_file(sigio_private[1]); - os_close_file(write_sigio_fds[0]); - os_close_file(write_sigio_fds[1]); + close(sigio_private[0]); + close(sigio_private[1]); + close(write_sigio_fds[0]); + close(write_sigio_fds[1]); /* Critical section end */ set_signals(flags); } @@ -281,13 +162,13 @@ int add_sigio_fd(int fd, int read) sigio_lock(); for(i = 0; i < current_poll.used; i++){ - if(current_poll.poll[i].fd == fd) + if(current_poll.poll[i].fd == fd) goto out; } n = current_poll.used + 1; err = need_poll(n); - if(err) + if(err) goto out; for(i = 0; i < current_poll.used; i++) @@ -316,7 +197,7 @@ int ignore_sigio_fd(int fd) } if(i == current_poll.used) goto out; - + err = need_poll(current_poll.used - 1); if(err) goto out; @@ -337,7 +218,7 @@ int ignore_sigio_fd(int fd) return(err); } -static struct pollfd* setup_initial_poll(int fd) +static struct pollfd *setup_initial_poll(int fd) { struct pollfd *p; @@ -377,7 +258,7 @@ void write_sigio_workaround(void) } err = os_pipe(l_sigio_private, 1, 1); if(err < 0){ - printk("write_sigio_workaround - os_pipe 1 failed, " + printk("write_sigio_workaround - os_pipe 2 failed, " "err = %d\n", -err); goto out_close1; } @@ -391,76 +272,52 @@ void write_sigio_workaround(void) /* Did we race? Don't try to optimize this, please, it's not so likely * to happen, and no more than once at the boot. */ if(write_sigio_pid != -1) - goto out_unlock; + goto out_free; - write_sigio_pid = run_helper_thread(write_sigio_thread, NULL, - CLONE_FILES | CLONE_VM, &stack, 0); - - if (write_sigio_pid < 0) - goto out_clear; + current_poll = ((struct pollfds) { .poll = p, + .used = 1, + .size = 1 }); if (write_sigio_irq(l_write_sigio_fds[0])) - goto out_kill; + goto out_clear_poll; - /* Success, finally. */ memcpy(write_sigio_fds, l_write_sigio_fds, sizeof(l_write_sigio_fds)); memcpy(sigio_private, l_sigio_private, sizeof(l_sigio_private)); - current_poll = ((struct pollfds) { .poll = p, - .used = 1, - .size = 1 }); + write_sigio_pid = run_helper_thread(write_sigio_thread, NULL, + CLONE_FILES | CLONE_VM, &stack, 0); - sigio_unlock(); - return; + if (write_sigio_pid < 0) + goto out_clear; - out_kill: - l_write_sigio_pid = write_sigio_pid; - write_sigio_pid = -1; sigio_unlock(); - /* Going to call waitpid, avoid holding the lock. */ - os_kill_process(l_write_sigio_pid, 1); - goto out_free; + return; - out_clear: +out_clear: write_sigio_pid = -1; - out_unlock: - sigio_unlock(); - out_free: + write_sigio_fds[0] = -1; + write_sigio_fds[1] = -1; + sigio_private[0] = -1; + sigio_private[1] = -1; +out_clear_poll: + current_poll = ((struct pollfds) { .poll = NULL, + .size = 0, + .used = 0 }); +out_free: kfree(p); - out_close2: - os_close_file(l_sigio_private[0]); - os_close_file(l_sigio_private[1]); - out_close1: - os_close_file(l_write_sigio_fds[0]); - os_close_file(l_write_sigio_fds[1]); - return; -} - -int read_sigio_fd(int fd) -{ - int n; - char c; - - n = os_read_file(fd, &c, sizeof(c)); - if(n != sizeof(c)){ - if(n < 0) { - printk("read_sigio_fd - read failed, err = %d\n", -n); - return(n); - } - else { - printk("read_sigio_fd - short read, bytes = %d\n", n); - return(-EIO); - } - } - return(n); + sigio_unlock(); +out_close2: + close(l_sigio_private[0]); + close(l_sigio_private[1]); +out_close1: + close(l_write_sigio_fds[0]); + close(l_write_sigio_fds[1]); } -static void sigio_cleanup(void) +void sigio_cleanup(void) { - if (write_sigio_pid != -1) { + if(write_sigio_pid != -1){ os_kill_process(write_sigio_pid, 1); write_sigio_pid = -1; } } - -__uml_exitcall(sigio_cleanup); diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 829d6b0d8b0..32753131f8d 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -3,6 +3,7 @@ * Licensed under the GPL */ +#include <pty.h> #include <stdio.h> #include <stddef.h> #include <stdarg.h> @@ -539,3 +540,130 @@ int __init parse_iomem(char *str, int *add) return(1); } + +/* Changed during early boot */ +int pty_output_sigio = 0; +int pty_close_sigio = 0; + +/* Used as a flag during SIGIO testing early in boot */ +static volatile int got_sigio = 0; + +static void __init handler(int sig) +{ + got_sigio = 1; +} + +struct openpty_arg { + int master; + int slave; + int err; +}; + +static void openpty_cb(void *arg) +{ + struct openpty_arg *info = arg; + + info->err = 0; + if(openpty(&info->master, &info->slave, NULL, NULL, NULL)) + info->err = -errno; +} + +static void __init check_one_sigio(void (*proc)(int, int)) +{ + struct sigaction old, new; + struct openpty_arg pty = { .master = -1, .slave = -1 }; + int master, slave, err; + + initial_thread_cb(openpty_cb, &pty); + if(pty.err){ + printk("openpty failed, errno = %d\n", -pty.err); + return; + } + + master = pty.master; + slave = pty.slave; + + if((master == -1) || (slave == -1)){ + printk("openpty failed to allocate a pty\n"); + return; + } + + /* Not now, but complain so we now where we failed. */ + err = raw(master); + if (err < 0) + panic("check_sigio : __raw failed, errno = %d\n", -err); + + err = os_sigio_async(master, slave); + if(err < 0) + panic("tty_fds : sigio_async failed, err = %d\n", -err); + + if(sigaction(SIGIO, NULL, &old) < 0) + panic("check_sigio : sigaction 1 failed, errno = %d\n", errno); + new = old; + new.sa_handler = handler; + if(sigaction(SIGIO, &new, NULL) < 0) + panic("check_sigio : sigaction 2 failed, errno = %d\n", errno); + + got_sigio = 0; + (*proc)(master, slave); + + close(master); + close(slave); + + if(sigaction(SIGIO, &old, NULL) < 0) + panic("check_sigio : sigaction 3 failed, errno = %d\n", errno); +} + +static void tty_output(int master, int slave) +{ + int n; + char buf[512]; + + printk("Checking that host ptys support output SIGIO..."); + + memset(buf, 0, sizeof(buf)); + + while(os_write_file(master, buf, sizeof(buf)) > 0) ; + if(errno != EAGAIN) + panic("check_sigio : write failed, errno = %d\n", errno); + while(((n = os_read_file(slave, buf, sizeof(buf))) > 0) && !got_sigio) ; + + if(got_sigio){ + printk("Yes\n"); + pty_output_sigio = 1; + } + else if(n == -EAGAIN) printk("No, enabling workaround\n"); + else panic("check_sigio : read failed, err = %d\n", n); +} + +static void tty_close(int master, int slave) +{ + printk("Checking that host ptys support SIGIO on close..."); + + close(slave); + if(got_sigio){ + printk("Yes\n"); + pty_close_sigio = 1; + } + else printk("No, enabling workaround\n"); +} + +void __init check_sigio(void) +{ + if((os_access("/dev/ptmx", OS_ACC_R_OK) < 0) && + (os_access("/dev/ptyp0", OS_ACC_R_OK) < 0)){ + printk("No pseudo-terminals available - skipping pty SIGIO " + "check\n"); + return; + } + check_one_sigio(tty_output); + check_one_sigio(tty_close); +} + +void os_check_bugs(void) +{ + check_ptrace(); + check_sigio(); + check_devanon(); +} + diff --git a/arch/um/os-Linux/tt.c b/arch/um/os-Linux/tt.c index 919d19f1153..5461a065bbb 100644 --- a/arch/um/os-Linux/tt.c +++ b/arch/um/os-Linux/tt.c @@ -110,6 +110,16 @@ int wait_for_stop(int pid, int sig, int cont_type, void *relay) } } +void forward_ipi(int fd, int pid) +{ + int err; + + err = os_set_owner(fd, pid); + if(err < 0) + printk("forward_ipi: set_owner failed, fd = %d, me = %d, " + "target = %d, err = %d\n", fd, os_getpid(), pid, -err); +} + /* *------------------------- * only for tt mode (will be deleted in future...) diff --git a/arch/um/kernel/tty_log.c b/arch/um/os-Linux/tty_log.c index 9ada656f68c..c6ba56c1560 100644 --- a/arch/um/kernel/tty_log.c +++ b/arch/um/os-Linux/tty_log.c @@ -1,5 +1,5 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) and +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) and * geoffrey hing <ghing@net.ohio-state.edu> * Licensed under the GPL */ @@ -58,7 +58,7 @@ int open_tty_log(void *tty, void *current_tty) return(tty_log_fd); } - sprintf(buf, "%s/%0u-%0u", tty_log_dir, (unsigned int) tv.tv_sec, + sprintf(buf, "%s/%0u-%0u", tty_log_dir, (unsigned int) tv.tv_sec, (unsigned int) tv.tv_usec); fd = os_open_file(buf, of_append(of_create(of_rdwr(OPENFLAGS()))), @@ -216,15 +216,3 @@ __uml_setup("tty_log_fd=", set_tty_log_fd, " tty data will be written. Preconfigure the descriptor with something\n" " like '10>tty_log tty_log_fd=10'.\n\n" ); - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c index ecf107ae5ac..198e5916328 100644 --- a/arch/um/os-Linux/umid.c +++ b/arch/um/os-Linux/umid.c @@ -143,8 +143,10 @@ static int not_dead_yet(char *dir) goto out_close; } - if((kill(p, 0) == 0) || (errno != ESRCH)) + if((kill(p, 0) == 0) || (errno != ESRCH)){ + printk("umid \"%s\" is already in use by pid %d\n", umid, p); return 1; + } err = actually_do_remove(dir); if(err) @@ -234,33 +236,44 @@ int __init make_umid(void) err = mkdir(tmp, 0777); if(err < 0){ err = -errno; - if(errno != EEXIST) + if(err != -EEXIST) goto err; - if(not_dead_yet(tmp) < 0) + /* 1 -> this umid is already in use + * < 0 -> we couldn't remove the umid directory + * In either case, we can't use this umid, so return -EEXIST. + */ + if(not_dead_yet(tmp) != 0) goto err; err = mkdir(tmp, 0777); } - if(err < 0){ - printk("Failed to create '%s' - err = %d\n", umid, err); - goto err_rmdir; + if(err){ + err = -errno; + printk("Failed to create '%s' - err = %d\n", umid, -errno); + goto err; } umid_setup = 1; create_pid_file(); - return 0; - - err_rmdir: - rmdir(tmp); + err = 0; err: return err; } static int __init make_umid_init(void) { + if(!make_umid()) + return 0; + + /* If initializing with the given umid failed, then try again with + * a random one. + */ + printk("Failed to initialize umid \"%s\", trying with a random umid\n", + umid); + *umid = '\0'; make_umid(); return 0; diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c index e839ce65ad2..8032a105949 100644 --- a/arch/um/sys-i386/ptrace.c +++ b/arch/um/sys-i386/ptrace.c @@ -6,6 +6,7 @@ #include <linux/config.h> #include <linux/compiler.h> #include "linux/sched.h" +#include "linux/mm.h" #include "asm/elf.h" #include "asm/ptrace.h" #include "asm/uaccess.h" @@ -26,9 +27,17 @@ int is_syscall(unsigned long addr) n = copy_from_user(&instr, (void __user *) addr, sizeof(instr)); if(n){ - printk("is_syscall : failed to read instruction from 0x%lx\n", - addr); - return(0); + /* access_process_vm() grants access to vsyscall and stub, + * while copy_from_user doesn't. Maybe access_process_vm is + * slow, but that doesn't matter, since it will be called only + * in case of singlestepping, if copy_from_user failed. + */ + n = access_process_vm(current, addr, &instr, sizeof(instr), 0); + if(n != sizeof(instr)) { + printk("is_syscall : failed to read instruction from " + "0x%lx\n", addr); + return(1); + } } /* int 0x80 or sysenter */ return((instr == 0x80cd) || (instr == 0x340f)); diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c index 7cd1a82dc8c..33a40f5ef0d 100644 --- a/arch/um/sys-i386/signal.c +++ b/arch/um/sys-i386/signal.c @@ -58,7 +58,7 @@ static int copy_sc_from_user_skas(struct pt_regs *regs, } int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, - struct pt_regs *regs) + struct pt_regs *regs, unsigned long sp) { struct sigcontext sc; unsigned long fpregs[HOST_FP_SIZE]; @@ -72,7 +72,7 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, sc.edi = REGS_EDI(regs->regs.skas.regs); sc.esi = REGS_ESI(regs->regs.skas.regs); sc.ebp = REGS_EBP(regs->regs.skas.regs); - sc.esp = REGS_SP(regs->regs.skas.regs); + sc.esp = sp; sc.ebx = REGS_EBX(regs->regs.skas.regs); sc.edx = REGS_EDX(regs->regs.skas.regs); sc.ecx = REGS_ECX(regs->regs.skas.regs); @@ -132,7 +132,7 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, } int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, - struct sigcontext *from, int fpsize) + struct sigcontext *from, int fpsize, unsigned long sp) { struct _fpstate *to_fp, *from_fp; int err; @@ -140,11 +140,18 @@ int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, to_fp = (fp ? fp : (struct _fpstate *) (to + 1)); from_fp = from->fpstate; err = copy_to_user(to, from, sizeof(*to)); + + /* The SP in the sigcontext is the updated one for the signal + * delivery. The sp passed in is the original, and this needs + * to be restored, so we stick it in separately. + */ + err |= copy_to_user(&SC_SP(to), sp, sizeof(sp)); + if(from_fp != NULL){ err |= copy_to_user(&to->fpstate, &to_fp, sizeof(to->fpstate)); err |= copy_to_user(to_fp, from_fp, fpsize); } - return(err); + return err; } #endif @@ -159,11 +166,11 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from) } static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp, - struct pt_regs *from) + struct pt_regs *from, unsigned long sp) { return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs), - sizeof(*fp)), - copy_sc_to_user_skas(to, fp, from))); + sizeof(*fp), sp), + copy_sc_to_user_skas(to, fp, from, sp))); } static int copy_ucontext_to_user(struct ucontext *uc, struct _fpstate *fp, @@ -174,7 +181,7 @@ static int copy_ucontext_to_user(struct ucontext *uc, struct _fpstate *fp, err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp); err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags); err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size); - err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs); + err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs, sp); err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set)); return(err); } @@ -207,6 +214,7 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, { struct sigframe __user *frame; void *restorer; + unsigned long save_sp = PT_REGS_SP(regs); int err = 0; stack_top &= -8UL; @@ -218,9 +226,19 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, if(ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; + /* Update SP now because the page fault handler refuses to extend + * the stack if the faulting address is too far below the current + * SP, which frame now certainly is. If there's an error, the original + * value is restored on the way out. + * When writing the sigcontext to the stack, we have to write the + * original value, so that's passed to copy_sc_to_user, which does + * the right thing with it. + */ + PT_REGS_SP(regs) = (unsigned long) frame; + err |= __put_user(restorer, &frame->pretcode); err |= __put_user(sig, &frame->sig); - err |= copy_sc_to_user(&frame->sc, NULL, regs); + err |= copy_sc_to_user(&frame->sc, NULL, regs, save_sp); err |= __put_user(mask->sig[0], &frame->sc.oldmask); if (_NSIG_WORDS > 1) err |= __copy_to_user(&frame->extramask, &mask->sig[1], @@ -238,7 +256,7 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, err |= __put_user(0x80cd, (short __user *)(frame->retcode+6)); if(err) - return(err); + goto err; PT_REGS_SP(regs) = (unsigned long) frame; PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler; @@ -248,7 +266,11 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) ptrace_notify(SIGTRAP); - return(0); + return 0; + +err: + PT_REGS_SP(regs) = save_sp; + return err; } int setup_signal_stack_si(unsigned long stack_top, int sig, @@ -257,6 +279,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, { struct rt_sigframe __user *frame; void *restorer; + unsigned long save_sp = PT_REGS_SP(regs); int err = 0; stack_top &= -8UL; @@ -268,13 +291,16 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, if(ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; + /* See comment above about why this is here */ + PT_REGS_SP(regs) = (unsigned long) frame; + err |= __put_user(restorer, &frame->pretcode); err |= __put_user(sig, &frame->sig); err |= __put_user(&frame->info, &frame->pinfo); err |= __put_user(&frame->uc, &frame->puc); err |= copy_siginfo_to_user(&frame->info, info); err |= copy_ucontext_to_user(&frame->uc, &frame->fpstate, mask, - PT_REGS_SP(regs)); + save_sp); /* * This is movl $,%eax ; int $0x80 @@ -288,9 +314,8 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, err |= __put_user(0x80cd, (short __user *)(frame->retcode+5)); if(err) - return(err); + goto err; - PT_REGS_SP(regs) = (unsigned long) frame; PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler; PT_REGS_EAX(regs) = (unsigned long) sig; PT_REGS_EDX(regs) = (unsigned long) &frame->info; @@ -298,7 +323,11 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) ptrace_notify(SIGTRAP); - return(0); + return 0; + +err: + PT_REGS_SP(regs) = save_sp; + return err; } long sys_sigreturn(struct pt_regs regs) diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c index 26b68675053..6f4ef2b7fa4 100644 --- a/arch/um/sys-i386/user-offsets.c +++ b/arch/um/sys-i386/user-offsets.c @@ -3,12 +3,13 @@ #include <asm/ptrace.h> #include <asm/user.h> #include <linux/stddef.h> +#include <sys/poll.h> #define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) #define DEFINE_LONGS(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long))) + asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long))) #define OFFSET(sym, str, mem) \ DEFINE(sym, offsetof(struct str, mem)); @@ -67,4 +68,9 @@ void foo(void) DEFINE(HOST_ES, ES); DEFINE(HOST_GS, GS); DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct)); + + /* XXX Duplicated between i386 and x86_64 */ + DEFINE(UM_POLLIN, POLLIN); + DEFINE(UM_POLLPRI, POLLPRI); + DEFINE(UM_POLLOUT, POLLOUT); } diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index 74eee5c7c6d..147bbf05cbc 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -8,6 +8,7 @@ #include <asm/ptrace.h> #include <linux/sched.h> #include <linux/errno.h> +#include <linux/mm.h> #include <asm/uaccess.h> #include <asm/elf.h> @@ -136,9 +137,28 @@ void arch_switch(void) */ } +/* XXX Mostly copied from sys-i386 */ int is_syscall(unsigned long addr) { - panic("is_syscall"); + unsigned short instr; + int n; + + n = copy_from_user(&instr, (void __user *) addr, sizeof(instr)); + if(n){ + /* access_process_vm() grants access to vsyscall and stub, + * while copy_from_user doesn't. Maybe access_process_vm is + * slow, but that doesn't matter, since it will be called only + * in case of singlestepping, if copy_from_user failed. + */ + n = access_process_vm(current, addr, &instr, sizeof(instr), 0); + if(n != sizeof(instr)) { + printk("is_syscall : failed to read instruction from " + "0x%lx\n", addr); + return(1); + } + } + /* sysenter */ + return(instr == 0x050f); } int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu ) diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c index fe1d065332b..e75c4e1838b 100644 --- a/arch/um/sys-x86_64/signal.c +++ b/arch/um/sys-x86_64/signal.c @@ -55,7 +55,8 @@ static int copy_sc_from_user_skas(struct pt_regs *regs, } int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, - struct pt_regs *regs, unsigned long mask) + struct pt_regs *regs, unsigned long mask, + unsigned long sp) { struct faultinfo * fi = ¤t->thread.arch.faultinfo; int err = 0; @@ -70,7 +71,11 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, err |= PUTREG(regs, RDI, to, rdi); err |= PUTREG(regs, RSI, to, rsi); err |= PUTREG(regs, RBP, to, rbp); - err |= PUTREG(regs, RSP, to, rsp); + /* Must use orignal RSP, which is passed in, rather than what's in + * the pt_regs, because that's already been updated to point at the + * signal frame. + */ + err |= __put_user(sp, &to->rsp); err |= PUTREG(regs, RBX, to, rbx); err |= PUTREG(regs, RDX, to, rdx); err |= PUTREG(regs, RCX, to, rcx); @@ -102,7 +107,7 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, #ifdef CONFIG_MODE_TT int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, - int fpsize) + int fpsize) { struct _fpstate *to_fp, *from_fp; unsigned long sigs; @@ -120,7 +125,7 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, } int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, - struct sigcontext *from, int fpsize) + struct sigcontext *from, int fpsize, unsigned long sp) { struct _fpstate *to_fp, *from_fp; int err; @@ -128,11 +133,17 @@ int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, to_fp = (fp ? fp : (struct _fpstate *) (to + 1)); from_fp = from->fpstate; err = copy_to_user(to, from, sizeof(*to)); + /* The SP in the sigcontext is the updated one for the signal + * delivery. The sp passed in is the original, and this needs + * to be restored, so we stick it in separately. + */ + err |= copy_to_user(&SC_SP(to), sp, sizeof(sp)); + if(from_fp != NULL){ err |= copy_to_user(&to->fpstate, &to_fp, sizeof(to->fpstate)); err |= copy_to_user(to_fp, from_fp, fpsize); } - return(err); + return err; } #endif @@ -148,11 +159,12 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from) } static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp, - struct pt_regs *from, unsigned long mask) + struct pt_regs *from, unsigned long mask, + unsigned long sp) { return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs), - sizeof(*fp)), - copy_sc_to_user_skas(to, fp, from, mask))); + sizeof(*fp), sp), + copy_sc_to_user_skas(to, fp, from, mask, sp))); } struct rt_sigframe @@ -170,6 +182,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, { struct rt_sigframe __user *frame; struct _fpstate __user *fp = NULL; + unsigned long save_sp = PT_REGS_RSP(regs); int err = 0; struct task_struct *me = current; @@ -193,14 +206,25 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, goto out; } + /* Update SP now because the page fault handler refuses to extend + * the stack if the faulting address is too far below the current + * SP, which frame now certainly is. If there's an error, the original + * value is restored on the way out. + * When writing the sigcontext to the stack, we have to write the + * original value, so that's passed to copy_sc_to_user, which does + * the right thing with it. + */ + PT_REGS_RSP(regs) = (unsigned long) frame; + /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(PT_REGS_SP(regs)), + err |= __put_user(sas_ss_flags(save_sp), &frame->uc.uc_stack.ss_flags); err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= copy_sc_to_user(&frame->uc.uc_mcontext, fp, regs, set->sig[0]); + err |= copy_sc_to_user(&frame->uc.uc_mcontext, fp, regs, set->sig[0], + save_sp); err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate); if (sizeof(*set) == 16) { __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]); @@ -217,10 +241,10 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, err |= __put_user(ka->sa.sa_restorer, &frame->pretcode); else /* could use a vstub here */ - goto out; + goto restore_sp; if (err) - goto out; + goto restore_sp; /* Set up registers for signal handler */ { @@ -238,10 +262,12 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, PT_REGS_RSI(regs) = (unsigned long) &frame->info; PT_REGS_RDX(regs) = (unsigned long) &frame->uc; PT_REGS_RIP(regs) = (unsigned long) ka->sa.sa_handler; - - PT_REGS_RSP(regs) = (unsigned long) frame; out: - return(err); + return err; + +restore_sp: + PT_REGS_RSP(regs) = save_sp; + return err; } long sys_rt_sigreturn(struct pt_regs *regs) diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c index 7bd54a921cf..899cebb57c3 100644 --- a/arch/um/sys-x86_64/user-offsets.c +++ b/arch/um/sys-x86_64/user-offsets.c @@ -1,6 +1,7 @@ #include <stdio.h> #include <stddef.h> #include <signal.h> +#include <sys/poll.h> #define __FRAME_OFFSETS #include <asm/ptrace.h> #include <asm/types.h> @@ -88,4 +89,9 @@ void foo(void) DEFINE_LONGS(HOST_IP, RIP); DEFINE_LONGS(HOST_SP, RSP); DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct)); + + /* XXX Duplicated between i386 and x86_64 */ + DEFINE(UM_POLLIN, POLLIN); + DEFINE(UM_POLLPRI, POLLPRI); + DEFINE(UM_POLLOUT, POLLOUT); } diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index e7fc3e50034..37ec644603a 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -16,6 +16,12 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool default n +config GENERIC_FIND_NEXT_BIT + bool + default y +config GENERIC_HWEIGHT + bool + default y config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index e18eb79bf85..4310b4a311a 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -45,6 +45,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -246,6 +250,15 @@ config SCHED_SMT cost of slightly increased overhead in some places. If unsure say N here. +config SCHED_MC + bool "Multi-core scheduler support" + depends on SMP + default y + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + source "kernel/Kconfig.preempt" config NUMA @@ -321,9 +334,13 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NUMA +config OUT_OF_LINE_PFN_TO_PAGE + def_bool y + depends on DISCONTIGMEM + config NR_CPUS int "Maximum number of CPUs (2-256)" - range 2 256 + range 2 255 depends on SMP default "8" help @@ -364,13 +381,15 @@ config GART_IOMMU select SWIOTLB depends on PCI help - Support the IOMMU. Needed to run systems with more than 3GB of memory - properly with 32-bit PCI devices that do not support DAC (Double Address - Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter. - Normally the kernel will take the right choice by itself. - This option includes a driver for the AMD Opteron/Athlon64 northbridge IOMMU - and a software emulation used on other systems. - If unsure, say Y. + Support for hardware IOMMU in AMD's Opteron/Athlon64 Processors + and for the bounce buffering software IOMMU. + Needed to run systems with more than 3GB of memory properly with + 32-bit PCI devices that do not support DAC (Double Address Cycle). + The IOMMU can be turned off at runtime with the iommu=off parameter. + Normally the kernel will take the right choice by itself. + This option includes a driver for the AMD Opteron/Athlon64 IOMMU + northbridge and a software emulation used on other systems without + hardware IOMMU. If unsure, say Y. # need this always enabled with GART_IOMMU for the VIA workaround config SWIOTLB @@ -429,10 +448,10 @@ config CRASH_DUMP config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) default "0x1000000" if CRASH_DUMP - default "0x100000" + default "0x200000" help This gives the physical address where the kernel is loaded. Normally - for regular kernels this value is 0x100000 (1MB). But in the case + for regular kernels this value is 0x200000 (2MB). But in the case of kexec on panic the fail safe kernel needs to run at a different address than the panic-ed kernel. This option is used to set the load address for kernels used to capture crash dump on being kexec'ed @@ -464,6 +483,14 @@ config SECCOMP source kernel/Kconfig.hz +config REORDER + bool "Function reordering" + default n + help + This option enables the toolchain to reorder functions for a more + optimal TLB usage. If you have pretty much any version of binutils, + this can increase your kernel build time by roughly one minute. + endmenu # @@ -512,16 +539,6 @@ config PCI_MMCONFIG bool "Support mmconfig PCI config space access" depends on PCI && ACPI -config UNORDERED_IO - bool "Unordered IO mapping access" - depends on EXPERIMENTAL - help - Use unordered stores to access IO memory mappings in device drivers. - Still very experimental. When a driver works on IA64/ppc64/pa-risc it should - work with this option, but it makes the drivers behave differently - from i386. Requires that the driver writer used memory barriers - properly. - source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index d7fd46479c5..585fd4a559c 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -29,12 +29,14 @@ CHECKFLAGS += -D__x86_64__ -m64 cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8) cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona) +cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic) CFLAGS += $(cflags-y) CFLAGS += -m64 CFLAGS += -mno-red-zone CFLAGS += -mcmodel=kernel CFLAGS += -pipe +cflags-$(CONFIG_REORDER) += -ffunction-sections # this makes reading assembly source easier, but produces worse code # actually it makes the kernel smaller too. CFLAGS += -fno-reorder-blocks @@ -67,8 +69,8 @@ drivers-$(CONFIG_OPROFILE) += arch/x86_64/oprofile/ boot := arch/x86_64/boot -.PHONY: bzImage bzlilo install archmrproper \ - fdimage fdimage144 fdimage288 archclean +PHONY += bzImage bzlilo install archmrproper \ + fdimage fdimage144 fdimage288 isoimage archclean #Default target when executing "make" all: bzImage @@ -85,7 +87,7 @@ bzlilo: vmlinux bzdisk: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk -fdimage fdimage144 fdimage288: vmlinux +fdimage fdimage144 fdimage288 isoimage: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ install: @@ -97,11 +99,16 @@ archclean: define archhelp echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)' echo ' install - Install kernel using' - echo ' (your) ~/bin/installkernel or' - echo ' (distribution) /sbin/installkernel or' - echo ' install to $$(INSTALL_PATH) and run lilo' + echo ' (your) ~/bin/installkernel or' + echo ' (distribution) /sbin/installkernel or' + echo ' install to $$(INSTALL_PATH) and run lilo' + echo ' bzdisk - Create a boot floppy in /dev/fd0' + echo ' fdimage - Create a boot floppy image' + echo ' isoimage - Create a boot CD-ROM image' endef -CLEAN_FILES += arch/$(ARCH)/boot/fdimage arch/$(ARCH)/boot/mtools.conf +CLEAN_FILES += arch/$(ARCH)/boot/fdimage \ + arch/$(ARCH)/boot/image.iso \ + arch/$(ARCH)/boot/mtools.conf diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile index 29f8396ed15..43ee6c50c27 100644 --- a/arch/x86_64/boot/Makefile +++ b/arch/x86_64/boot/Makefile @@ -60,8 +60,12 @@ $(obj)/setup $(obj)/bootsect: %: %.o FORCE $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ -# Set this if you want to pass append arguments to the zdisk/fdimage kernel +# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel FDARGS = +# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel +FDINITRD = + +image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) $(obj)/mtools.conf: $(src)/mtools.conf.in sed -e 's|@OBJ@|$(obj)|g' < $< > $@ @@ -70,8 +74,11 @@ $(obj)/mtools.conf: $(src)/mtools.conf.in zdisk: $(BOOTIMAGE) $(obj)/mtools.conf MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync syslinux /dev/fd0 ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync # These require being root or having syslinux 2.02 or higher installed @@ -79,18 +86,39 @@ fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync syslinux $(obj)/fdimage ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync syslinux $(obj)/fdimage ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync +isoimage: $(BOOTIMAGE) + -rm -rf $(obj)/isoimage + mkdir $(obj)/isoimage + cp `echo /usr/lib*/syslinux/isolinux.bin | awk '{ print $1; }'` \ + $(obj)/isoimage + cp $(BOOTIMAGE) $(obj)/isoimage/linux + echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ + fi + mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \ + -no-emul-boot -boot-load-size 4 -boot-info-table \ + $(obj)/isoimage + rm -rf $(obj)/isoimage + zlilo: $(BOOTIMAGE) if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index ce4de61ed85..566ecc97ee5 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc3-git9 -# Sat Feb 18 00:27:03 2006 +# Linux kernel version: 2.6.16-git9 +# Sat Mar 25 15:18:40 2006 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -38,6 +38,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_VM86=y @@ -79,6 +80,7 @@ CONFIG_STOP_MACHINE=y # Block layer # CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -139,7 +141,6 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_NR_CPUS=32 CONFIG_HOTPLUG_CPU=y CONFIG_HPET_TIMER=y -CONFIG_X86_PM_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y @@ -148,12 +149,13 @@ CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x100000 +CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_REORDER is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y @@ -189,12 +191,14 @@ CONFIG_ACPI_NUMA=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set CONFIG_ACPI_TOSHIBA=y -CONFIG_ACPI_BLACKLIST_YEAR=2001 +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y +CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y +CONFIG_ACPI_HOTPLUG_MEMORY=y # # CPU Frequency scaling @@ -232,10 +236,8 @@ CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y -CONFIG_UNORDERED_IO=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y -# CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_DEBUG is not set # @@ -294,6 +296,7 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set @@ -701,6 +704,7 @@ CONFIG_S2IO=m # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set +# CONFIG_NET_WIRELESS_RTNETLINK is not set # # Wan interfaces @@ -861,6 +865,8 @@ CONFIG_RTC=y CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set CONFIG_RAW_DRIVER=y @@ -907,10 +913,6 @@ CONFIG_HWMON=y # CONFIG_IBM_ASM is not set # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -974,6 +976,7 @@ CONFIG_SOUND_ICH=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1002,7 +1005,6 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y @@ -1121,11 +1123,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices -# - -# -# EDAC - error detection and reporting (RAS) +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set @@ -1198,7 +1196,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -1321,6 +1318,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_RODATA is not set diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 572b3b28772..e776139afb2 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -58,7 +58,7 @@ struct elf_phdr; #define USE_ELF_CORE_DUMP 1 -/* Overwrite elfcore.h */ +/* Override elfcore.h */ #define _LINUX_ELFCORE_H 1 typedef unsigned int elf_greg_t; diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 00dee176c08..35b2faccdc6 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -501,7 +501,7 @@ ia32_sys_call_table: .quad sys_setdomainname .quad sys_uname .quad sys_modify_ldt - .quad sys32_adjtimex + .quad compat_sys_adjtimex .quad sys32_mprotect /* 125 */ .quad compat_sys_sigprocmask .quad quiet_ni_syscall /* create_module */ @@ -688,6 +688,8 @@ ia32_sys_call_table: .quad sys_ni_syscall /* pselect6 for now */ .quad sys_ni_syscall /* ppoll for now */ .quad sys_unshare /* 310 */ + .quad compat_sys_set_robust_list + .quad compat_sys_get_robust_list ia32_syscall_end: .rept IA32_NR_syscalls-(ia32_syscall_end-ia32_sys_call_table)/8 .quad ni_syscall diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index 2bc55af9541..f182b20858e 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -30,7 +30,6 @@ #include <linux/resource.h> #include <linux/times.h> #include <linux/utsname.h> -#include <linux/timex.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/sem.h> @@ -430,24 +429,12 @@ put_tv32(struct compat_timeval __user *o, struct timeval *i) return err; } -extern int do_setitimer(int which, struct itimerval *, struct itimerval *); +extern unsigned int alarm_setitimer(unsigned int seconds); asmlinkage long sys32_alarm(unsigned int seconds) { - struct itimerval it_new, it_old; - unsigned int oldalarm; - - it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0; - it_new.it_value.tv_sec = seconds; - it_new.it_value.tv_usec = 0; - do_setitimer(ITIMER_REAL, &it_new, &it_old); - oldalarm = it_old.it_value.tv_sec; - /* ehhh.. We can't return 0 if we have an alarm pending.. */ - /* And we'd better return too much than too little anyway */ - if (it_old.it_value.tv_usec) - oldalarm++; - return oldalarm; + return alarm_setitimer(seconds); } /* Translations due to time_t size differences. Which affects all @@ -779,82 +766,6 @@ sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) return ret; } -/* Handle adjtimex compatibility. */ - -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - -extern int do_adjtimex(struct timex *); - -asmlinkage long -sys32_adjtimex(struct timex32 __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if (!access_ok(VERIFY_READ, utp, sizeof(struct timex32)) || - __get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if (!access_ok(VERIFY_WRITE, utp, sizeof(struct timex32)) || - __put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index a0f955b9995..fffd6b0a2fa 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -60,7 +60,7 @@ static u32 __init allocate_aperture(void) printk("Cannot allocate aperture memory hole (%p,%uK)\n", p, aper_size>>10); if (p) - free_bootmem_node(nd0, (unsigned long)p, aper_size); + free_bootmem_node(nd0, __pa(p), aper_size); return 0; } printk("Mapping aperture over %d KB of RAM @ %lx\n", @@ -161,7 +161,7 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) int num, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { + for (num = 0; num < 256; num++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index e5b14c57eaa..d54620147e8 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -342,6 +342,7 @@ void __init init_bsp_APIC(void) void __cpuinit setup_local_APIC (void) { unsigned int value, maxlvt; + int i, j; value = apic_read(APIC_LVR); @@ -371,6 +372,25 @@ void __cpuinit setup_local_APIC (void) apic_write(APIC_TASKPRI, value); /* + * After a crash, we no longer service the interrupts and a pending + * interrupt from previous kernel might still have ISR bit set. + * + * Most probably by now CPU has serviced that pending interrupt and + * it might not have done the ack_APIC_irq() because it thought, + * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it + * does not clear the ISR bit and cpu thinks it has already serivced + * the interrupt. Hence a vector might get locked. It was noticed + * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. + */ + for (i = APIC_ISR_NR - 1; i >= 0; i--) { + value = apic_read(APIC_ISR + i*0x10); + for (j = 31; j >= 0; j--) { + if (value & (1<<j)) + ack_APIC_irq(); + } + } + + /* * Now that we are all set up, enable the APIC */ value = apic_read(APIC_SPIV); diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 7c10e9009d6..8538bfea30e 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -553,7 +553,7 @@ iret_label: /* force a signal here? this matches i386 behaviour */ /* running with kernel gs */ bad_iret: - movq $-9999,%rdi /* better code? */ + movq $11,%rdi /* SIGSEGV */ sti jmp do_exit .previous diff --git a/arch/x86_64/kernel/functionlist b/arch/x86_64/kernel/functionlist new file mode 100644 index 00000000000..2bcebdc3eed --- /dev/null +++ b/arch/x86_64/kernel/functionlist @@ -0,0 +1,1286 @@ +*(.text.flush_thread) +*(.text.check_poison_obj) +*(.text.copy_page) +*(.text.__set_personality) +*(.text.gart_map_sg) +*(.text.kmem_cache_free) +*(.text.find_get_page) +*(.text._raw_spin_lock) +*(.text.ide_outb) +*(.text.unmap_vmas) +*(.text.copy_page_range) +*(.text.kprobe_handler) +*(.text.__handle_mm_fault) +*(.text.__d_lookup) +*(.text.copy_user_generic) +*(.text.__link_path_walk) +*(.text.get_page_from_freelist) +*(.text.kmem_cache_alloc) +*(.text.drive_cmd_intr) +*(.text.ia32_setup_sigcontext) +*(.text.huge_pte_offset) +*(.text.do_page_fault) +*(.text.page_remove_rmap) +*(.text.release_pages) +*(.text.ide_end_request) +*(.text.__mutex_lock_slowpath) +*(.text.__find_get_block) +*(.text.kfree) +*(.text.vfs_read) +*(.text._raw_spin_unlock) +*(.text.free_hot_cold_page) +*(.text.fget_light) +*(.text.schedule) +*(.text.memcmp) +*(.text.touch_atime) +*(.text.__might_sleep) +*(.text.__down_read_trylock) +*(.text.arch_pick_mmap_layout) +*(.text.find_vma) +*(.text.__make_request) +*(.text.do_generic_mapping_read) +*(.text.mutex_lock_interruptible) +*(.text.__generic_file_aio_read) +*(.text._atomic_dec_and_lock) +*(.text.__wake_up_bit) +*(.text.add_to_page_cache) +*(.text.cache_alloc_debugcheck_after) +*(.text.vm_normal_page) +*(.text.mutex_debug_check_no_locks_freed) +*(.text.net_rx_action) +*(.text.__find_first_zero_bit) +*(.text.put_page) +*(.text._raw_read_lock) +*(.text.__delay) +*(.text.dnotify_parent) +*(.text.do_path_lookup) +*(.text.do_sync_read) +*(.text.do_lookup) +*(.text.bit_waitqueue) +*(.text.file_read_actor) +*(.text.strncpy_from_user) +*(.text.__pagevec_lru_add_active) +*(.text.fget) +*(.text.dput) +*(.text.__strnlen_user) +*(.text.inotify_inode_queue_event) +*(.text.rw_verify_area) +*(.text.ide_intr) +*(.text.inotify_dentry_parent_queue_event) +*(.text.permission) +*(.text.memscan) +*(.text.hpet_rtc_interrupt) +*(.text.do_mmap_pgoff) +*(.text.current_fs_time) +*(.text.vfs_getattr) +*(.text.kmem_flagcheck) +*(.text.mark_page_accessed) +*(.text.free_pages_and_swap_cache) +*(.text.generic_fillattr) +*(.text.__block_prepare_write) +*(.text.__set_page_dirty_nobuffers) +*(.text.link_path_walk) +*(.text.find_get_pages_tag) +*(.text.ide_do_request) +*(.text.__alloc_pages) +*(.text.generic_permission) +*(.text.mod_page_state_offset) +*(.text.free_pgd_range) +*(.text.generic_file_buffered_write) +*(.text.number) +*(.text.ide_do_rw_disk) +*(.text.__brelse) +*(.text.__mod_page_state_offset) +*(.text.rotate_reclaimable_page) +*(.text.find_vma_prepare) +*(.text.find_vma_prev) +*(.text.lru_cache_add_active) +*(.text.__kmalloc_track_caller) +*(.text.smp_invalidate_interrupt) +*(.text.handle_IRQ_event) +*(.text.__find_get_block_slow) +*(.text.do_wp_page) +*(.text.do_select) +*(.text.set_user_nice) +*(.text.sys_read) +*(.text.do_munmap) +*(.text.csum_partial) +*(.text.__do_softirq) +*(.text.may_open) +*(.text.getname) +*(.text.get_empty_filp) +*(.text.__fput) +*(.text.remove_mapping) +*(.text.filp_ctor) +*(.text.poison_obj) +*(.text.unmap_region) +*(.text.test_set_page_writeback) +*(.text.__do_page_cache_readahead) +*(.text.sock_def_readable) +*(.text.ide_outl) +*(.text.shrink_zone) +*(.text.rb_insert_color) +*(.text.get_request) +*(.text.sys_pread64) +*(.text.spin_bug) +*(.text.ide_outsl) +*(.text.mask_and_ack_8259A) +*(.text.filemap_nopage) +*(.text.page_add_file_rmap) +*(.text.find_lock_page) +*(.text.tcp_poll) +*(.text.__mark_inode_dirty) +*(.text.file_ra_state_init) +*(.text.generic_file_llseek) +*(.text.__pagevec_lru_add) +*(.text.page_cache_readahead) +*(.text.n_tty_receive_buf) +*(.text.zonelist_policy) +*(.text.vma_adjust) +*(.text.test_clear_page_dirty) +*(.text.sync_buffer) +*(.text.do_exit) +*(.text.__bitmap_weight) +*(.text.alloc_pages_current) +*(.text.get_unused_fd) +*(.text.zone_watermark_ok) +*(.text.cpuset_update_task_memory_state) +*(.text.__bitmap_empty) +*(.text.sys_munmap) +*(.text.__inode_dir_notify) +*(.text.__generic_file_aio_write_nolock) +*(.text.__pte_alloc) +*(.text.sys_select) +*(.text.vm_acct_memory) +*(.text.vfs_write) +*(.text.__lru_add_drain) +*(.text.prio_tree_insert) +*(.text.generic_file_aio_read) +*(.text.vma_merge) +*(.text.block_write_full_page) +*(.text.__page_set_anon_rmap) +*(.text.apic_timer_interrupt) +*(.text.release_console_sem) +*(.text.sys_write) +*(.text.sys_brk) +*(.text.dup_mm) +*(.text.read_current_timer) +*(.text.ll_rw_block) +*(.text.blk_rq_map_sg) +*(.text.dbg_userword) +*(.text.__block_commit_write) +*(.text.cache_grow) +*(.text.copy_strings) +*(.text.release_task) +*(.text.do_sync_write) +*(.text.unlock_page) +*(.text.load_elf_binary) +*(.text.__follow_mount) +*(.text.__getblk) +*(.text.do_sys_open) +*(.text.current_kernel_time) +*(.text.call_rcu) +*(.text.write_chan) +*(.text.vsnprintf) +*(.text.dummy_inode_setsecurity) +*(.text.submit_bh) +*(.text.poll_freewait) +*(.text.bio_alloc_bioset) +*(.text.skb_clone) +*(.text.page_waitqueue) +*(.text.__mutex_lock_interruptible_slowpath) +*(.text.get_index) +*(.text.csum_partial_copy_generic) +*(.text.bad_range) +*(.text.remove_vma) +*(.text.cp_new_stat) +*(.text.alloc_arraycache) +*(.text.test_clear_page_writeback) +*(.text.strsep) +*(.text.open_namei) +*(.text._raw_read_unlock) +*(.text.get_vma_policy) +*(.text.__down_write_trylock) +*(.text.find_get_pages) +*(.text.tcp_rcv_established) +*(.text.generic_make_request) +*(.text.__block_write_full_page) +*(.text.cfq_set_request) +*(.text.sys_inotify_init) +*(.text.split_vma) +*(.text.__mod_timer) +*(.text.get_options) +*(.text.vma_link) +*(.text.mpage_writepages) +*(.text.truncate_complete_page) +*(.text.tcp_recvmsg) +*(.text.sigprocmask) +*(.text.filemap_populate) +*(.text.sys_close) +*(.text.inotify_dev_queue_event) +*(.text.do_task_stat) +*(.text.__dentry_open) +*(.text.unlink_file_vma) +*(.text.__pollwait) +*(.text.packet_rcv_spkt) +*(.text.drop_buffers) +*(.text.free_pgtables) +*(.text.generic_file_direct_write) +*(.text.copy_process) +*(.text.netif_receive_skb) +*(.text.dnotify_flush) +*(.text.print_bad_pte) +*(.text.anon_vma_unlink) +*(.text.sys_mprotect) +*(.text.sync_sb_inodes) +*(.text.find_inode_fast) +*(.text.dummy_inode_readlink) +*(.text.putname) +*(.text.init_smp_flush) +*(.text.dbg_redzone2) +*(.text.sk_run_filter) +*(.text.may_expand_vm) +*(.text.generic_file_aio_write) +*(.text.find_next_zero_bit) +*(.text.file_kill) +*(.text.audit_getname) +*(.text.arch_unmap_area_topdown) +*(.text.alloc_page_vma) +*(.text.tcp_transmit_skb) +*(.text.rb_next) +*(.text.dbg_redzone1) +*(.text.generic_file_mmap) +*(.text.vfs_fstat) +*(.text.sys_time) +*(.text.page_lock_anon_vma) +*(.text.get_unmapped_area) +*(.text.remote_llseek) +*(.text.__up_read) +*(.text.fd_install) +*(.text.eventpoll_init_file) +*(.text.dma_alloc_coherent) +*(.text.create_empty_buffers) +*(.text.__mutex_unlock_slowpath) +*(.text.dup_fd) +*(.text.d_alloc) +*(.text.tty_ldisc_try) +*(.text.sys_stime) +*(.text.__rb_rotate_right) +*(.text.d_validate) +*(.text.rb_erase) +*(.text.path_release) +*(.text.memmove) +*(.text.invalidate_complete_page) +*(.text.clear_inode) +*(.text.cache_estimate) +*(.text.alloc_buffer_head) +*(.text.smp_call_function_interrupt) +*(.text.flush_tlb_others) +*(.text.file_move) +*(.text.balance_dirty_pages_ratelimited) +*(.text.vma_prio_tree_add) +*(.text.timespec_trunc) +*(.text.mempool_alloc) +*(.text.iget_locked) +*(.text.d_alloc_root) +*(.text.cpuset_populate_dir) +*(.text.anon_vma_prepare) +*(.text.sys_newstat) +*(.text.alloc_page_interleave) +*(.text.__path_lookup_intent_open) +*(.text.__pagevec_free) +*(.text.inode_init_once) +*(.text.free_vfsmnt) +*(.text.__user_walk_fd) +*(.text.cfq_idle_slice_timer) +*(.text.sys_mmap) +*(.text.sys_llseek) +*(.text.prio_tree_remove) +*(.text.filp_close) +*(.text.file_permission) +*(.text.vma_prio_tree_remove) +*(.text.tcp_ack) +*(.text.nameidata_to_filp) +*(.text.sys_lseek) +*(.text.percpu_counter_mod) +*(.text.igrab) +*(.text.__bread) +*(.text.alloc_inode) +*(.text.filldir) +*(.text.__rb_rotate_left) +*(.text.irq_affinity_write_proc) +*(.text.init_request_from_bio) +*(.text.find_or_create_page) +*(.text.tty_poll) +*(.text.tcp_sendmsg) +*(.text.ide_wait_stat) +*(.text.free_buffer_head) +*(.text.flush_signal_handlers) +*(.text.tcp_v4_rcv) +*(.text.nr_blockdev_pages) +*(.text.locks_remove_flock) +*(.text.__iowrite32_copy) +*(.text.do_filp_open) +*(.text.try_to_release_page) +*(.text.page_add_new_anon_rmap) +*(.text.kmem_cache_size) +*(.text.eth_type_trans) +*(.text.try_to_free_buffers) +*(.text.schedule_tail) +*(.text.proc_lookup) +*(.text.no_llseek) +*(.text.kfree_skbmem) +*(.text.do_wait) +*(.text.do_mpage_readpage) +*(.text.vfs_stat_fd) +*(.text.tty_write) +*(.text.705) +*(.text.sync_page) +*(.text.__remove_shared_vm_struct) +*(.text.__kfree_skb) +*(.text.sock_poll) +*(.text.get_request_wait) +*(.text.do_sigaction) +*(.text.do_brk) +*(.text.tcp_event_data_recv) +*(.text.read_chan) +*(.text.pipe_writev) +*(.text.__emul_lookup_dentry) +*(.text.rtc_get_rtc_time) +*(.text.print_objinfo) +*(.text.file_update_time) +*(.text.do_signal) +*(.text.disable_8259A_irq) +*(.text.blk_queue_bounce) +*(.text.__anon_vma_link) +*(.text.__vma_link) +*(.text.vfs_rename) +*(.text.sys_newlstat) +*(.text.sys_newfstat) +*(.text.sys_mknod) +*(.text.__show_regs) +*(.text.iput) +*(.text.get_signal_to_deliver) +*(.text.flush_tlb_page) +*(.text.debug_mutex_wake_waiter) +*(.text.copy_thread) +*(.text.clear_page_dirty_for_io) +*(.text.buffer_io_error) +*(.text.vfs_permission) +*(.text.truncate_inode_pages_range) +*(.text.sys_recvfrom) +*(.text.remove_suid) +*(.text.mark_buffer_dirty) +*(.text.local_bh_enable) +*(.text.get_zeroed_page) +*(.text.get_vmalloc_info) +*(.text.flush_old_exec) +*(.text.dummy_inode_permission) +*(.text.__bio_add_page) +*(.text.prio_tree_replace) +*(.text.notify_change) +*(.text.mntput_no_expire) +*(.text.fput) +*(.text.__end_that_request_first) +*(.text.wake_up_bit) +*(.text.unuse_mm) +*(.text.skb_release_data) +*(.text.shrink_icache_memory) +*(.text.sched_balance_self) +*(.text.__pmd_alloc) +*(.text.pipe_poll) +*(.text.normal_poll) +*(.text.__free_pages) +*(.text.follow_mount) +*(.text.cdrom_start_packet_command) +*(.text.blk_recount_segments) +*(.text.bio_put) +*(.text.__alloc_skb) +*(.text.__wake_up) +*(.text.vm_stat_account) +*(.text.sys_fcntl) +*(.text.sys_fadvise64) +*(.text._raw_write_unlock) +*(.text.__pud_alloc) +*(.text.alloc_page_buffers) +*(.text.vfs_llseek) +*(.text.sockfd_lookup) +*(.text._raw_write_lock) +*(.text.put_compound_page) +*(.text.prune_dcache) +*(.text.pipe_readv) +*(.text.mempool_free) +*(.text.make_ahead_window) +*(.text.lru_add_drain) +*(.text.constant_test_bit) +*(.text.__clear_user) +*(.text.arch_unmap_area) +*(.text.anon_vma_link) +*(.text.sys_chroot) +*(.text.setup_arg_pages) +*(.text.radix_tree_preload) +*(.text.init_rwsem) +*(.text.generic_osync_inode) +*(.text.generic_delete_inode) +*(.text.do_sys_poll) +*(.text.dev_queue_xmit) +*(.text.default_llseek) +*(.text.__writeback_single_inode) +*(.text.vfs_ioctl) +*(.text.__up_write) +*(.text.unix_poll) +*(.text.sys_rt_sigprocmask) +*(.text.sock_recvmsg) +*(.text.recalc_bh_state) +*(.text.__put_unused_fd) +*(.text.process_backlog) +*(.text.locks_remove_posix) +*(.text.lease_modify) +*(.text.expand_files) +*(.text.end_buffer_read_nobh) +*(.text.d_splice_alias) +*(.text.debug_mutex_init_waiter) +*(.text.copy_from_user) +*(.text.cap_vm_enough_memory) +*(.text.show_vfsmnt) +*(.text.release_sock) +*(.text.pfifo_fast_enqueue) +*(.text.half_md4_transform) +*(.text.fs_may_remount_ro) +*(.text.do_fork) +*(.text.copy_hugetlb_page_range) +*(.text.cache_free_debugcheck) +*(.text.__tcp_select_window) +*(.text.task_handoff_register) +*(.text.sys_open) +*(.text.strlcpy) +*(.text.skb_copy_datagram_iovec) +*(.text.set_up_list3s) +*(.text.release_open_intent) +*(.text.qdisc_restart) +*(.text.n_tty_chars_in_buffer) +*(.text.inode_change_ok) +*(.text.__downgrade_write) +*(.text.debug_mutex_unlock) +*(.text.add_timer_randomness) +*(.text.sock_common_recvmsg) +*(.text.set_bh_page) +*(.text.printk_lock) +*(.text.path_release_on_umount) +*(.text.ip_output) +*(.text.ide_build_dmatable) +*(.text.__get_user_8) +*(.text.end_buffer_read_sync) +*(.text.__d_path) +*(.text.d_move) +*(.text.del_timer) +*(.text.constant_test_bit) +*(.text.blockable_page_cache_readahead) +*(.text.tty_read) +*(.text.sys_readlink) +*(.text.sys_faccessat) +*(.text.read_swap_cache_async) +*(.text.pty_write_room) +*(.text.page_address_in_vma) +*(.text.kthread) +*(.text.cfq_exit_io_context) +*(.text.__tcp_push_pending_frames) +*(.text.sys_pipe) +*(.text.submit_bio) +*(.text.pid_revalidate) +*(.text.page_referenced_file) +*(.text.lock_sock) +*(.text.get_page_state_node) +*(.text.generic_block_bmap) +*(.text.do_setitimer) +*(.text.dev_queue_xmit_nit) +*(.text.copy_from_read_buf) +*(.text.__const_udelay) +*(.text.console_conditional_schedule) +*(.text.wake_up_new_task) +*(.text.wait_for_completion_interruptible) +*(.text.tcp_rcv_rtt_update) +*(.text.sys_mlockall) +*(.text.set_fs_altroot) +*(.text.schedule_timeout) +*(.text.nr_free_pagecache_pages) +*(.text.nf_iterate) +*(.text.mapping_tagged) +*(.text.ip_queue_xmit) +*(.text.ip_local_deliver) +*(.text.follow_page) +*(.text.elf_map) +*(.text.dummy_file_permission) +*(.text.dispose_list) +*(.text.dentry_open) +*(.text.dentry_iput) +*(.text.bio_alloc) +*(.text.alloc_skb_from_cache) +*(.text.wait_on_page_bit) +*(.text.vfs_readdir) +*(.text.vfs_lstat) +*(.text.seq_escape) +*(.text.__posix_lock_file) +*(.text.mm_release) +*(.text.kref_put) +*(.text.ip_rcv) +*(.text.__iget) +*(.text.free_pages) +*(.text.find_mergeable_anon_vma) +*(.text.find_extend_vma) +*(.text.dummy_inode_listsecurity) +*(.text.bio_add_page) +*(.text.__vm_enough_memory) +*(.text.vfs_stat) +*(.text.tty_paranoia_check) +*(.text.tcp_read_sock) +*(.text.tcp_data_queue) +*(.text.sys_uname) +*(.text.sys_renameat) +*(.text.__strncpy_from_user) +*(.text.__mutex_init) +*(.text.__lookup_hash) +*(.text.kref_get) +*(.text.ip_route_input) +*(.text.__insert_inode_hash) +*(.text.do_sock_write) +*(.text.blk_done_softirq) +*(.text.__wake_up_sync) +*(.text.__vma_link_rb) +*(.text.tty_ioctl) +*(.text.tracesys) +*(.text.sys_getdents) +*(.text.sys_dup) +*(.text.stub_execve) +*(.text.sha_transform) +*(.text.radix_tree_tag_clear) +*(.text.put_unused_fd) +*(.text.put_files_struct) +*(.text.mpage_readpages) +*(.text.may_delete) +*(.text.kmem_cache_create) +*(.text.ip_mc_output) +*(.text.interleave_nodes) +*(.text.groups_search) +*(.text.generic_drop_inode) +*(.text.generic_commit_write) +*(.text.fcntl_setlk) +*(.text.exit_mmap) +*(.text.end_page_writeback) +*(.text.__d_rehash) +*(.text.debug_mutex_free_waiter) +*(.text.csum_ipv6_magic) +*(.text.count) +*(.text.cleanup_rbuf) +*(.text.check_spinlock_acquired_node) +*(.text.can_vma_merge_after) +*(.text.bio_endio) +*(.text.alloc_pidmap) +*(.text.write_ldt) +*(.text.vmtruncate_range) +*(.text.vfs_create) +*(.text.__user_walk) +*(.text.update_send_head) +*(.text.unmap_underlying_metadata) +*(.text.tty_ldisc_deref) +*(.text.tcp_setsockopt) +*(.text.tcp_send_ack) +*(.text.sys_pause) +*(.text.sys_gettimeofday) +*(.text.sync_dirty_buffer) +*(.text.strncmp) +*(.text.release_posix_timer) +*(.text.proc_file_read) +*(.text.prepare_to_wait) +*(.text.locks_mandatory_locked) +*(.text.interruptible_sleep_on_timeout) +*(.text.inode_sub_bytes) +*(.text.in_group_p) +*(.text.hrtimer_try_to_cancel) +*(.text.filldir64) +*(.text.fasync_helper) +*(.text.dummy_sb_pivotroot) +*(.text.d_lookup) +*(.text.d_instantiate) +*(.text.__d_find_alias) +*(.text.cpu_idle_wait) +*(.text.cond_resched_lock) +*(.text.chown_common) +*(.text.blk_congestion_wait) +*(.text.activate_page) +*(.text.unlock_buffer) +*(.text.tty_wakeup) +*(.text.tcp_v4_do_rcv) +*(.text.tcp_current_mss) +*(.text.sys_openat) +*(.text.sys_fchdir) +*(.text.strnlen_user) +*(.text.strnlen) +*(.text.strchr) +*(.text.sock_common_getsockopt) +*(.text.skb_checksum) +*(.text.remove_wait_queue) +*(.text.rb_replace_node) +*(.text.radix_tree_node_ctor) +*(.text.pty_chars_in_buffer) +*(.text.profile_hit) +*(.text.prio_tree_left) +*(.text.pgd_clear_bad) +*(.text.pfifo_fast_dequeue) +*(.text.page_referenced) +*(.text.open_exec) +*(.text.mmput) +*(.text.mm_init) +*(.text.__ide_dma_off_quietly) +*(.text.ide_dma_intr) +*(.text.hrtimer_start) +*(.text.get_io_context) +*(.text.__get_free_pages) +*(.text.find_first_zero_bit) +*(.text.file_free_rcu) +*(.text.dummy_socket_sendmsg) +*(.text.do_unlinkat) +*(.text.do_arch_prctl) +*(.text.destroy_inode) +*(.text.can_vma_merge_before) +*(.text.block_sync_page) +*(.text.block_prepare_write) +*(.text.bio_init) +*(.text.arch_ptrace) +*(.text.wake_up_inode) +*(.text.wait_on_retry_sync_kiocb) +*(.text.vma_prio_tree_next) +*(.text.tcp_rcv_space_adjust) +*(.text.__tcp_ack_snd_check) +*(.text.sys_utime) +*(.text.sys_recvmsg) +*(.text.sys_mremap) +*(.text.sys_bdflush) +*(.text.sleep_on) +*(.text.set_page_dirty_lock) +*(.text.seq_path) +*(.text.schedule_timeout_interruptible) +*(.text.sched_fork) +*(.text.rt_run_flush) +*(.text.profile_munmap) +*(.text.prepare_binprm) +*(.text.__pagevec_release_nonlru) +*(.text.m_show) +*(.text.lookup_mnt) +*(.text.__lookup_mnt) +*(.text.lock_timer_base) +*(.text.is_subdir) +*(.text.invalidate_bh_lru) +*(.text.init_buffer_head) +*(.text.ifind_fast) +*(.text.ide_dma_start) +*(.text.__get_page_state) +*(.text.flock_to_posix_lock) +*(.text.__find_symbol) +*(.text.do_futex) +*(.text.do_execve) +*(.text.dirty_writeback_centisecs_handler) +*(.text.dev_watchdog) +*(.text.can_share_swap_page) +*(.text.blkdev_put) +*(.text.bio_get_nr_vecs) +*(.text.xfrm_compile_policy) +*(.text.vma_prio_tree_insert) +*(.text.vfs_lstat_fd) +*(.text.__user_path_lookup_open) +*(.text.thread_return) +*(.text.tcp_send_delayed_ack) +*(.text.sock_def_error_report) +*(.text.shrink_slab) +*(.text.serial_out) +*(.text.seq_read) +*(.text.secure_ip_id) +*(.text.search_binary_handler) +*(.text.proc_pid_unhash) +*(.text.pagevec_lookup) +*(.text.new_inode) +*(.text.memcpy_toiovec) +*(.text.locks_free_lock) +*(.text.__lock_page) +*(.text.__lock_buffer) +*(.text.load_module) +*(.text.is_bad_inode) +*(.text.invalidate_inode_buffers) +*(.text.insert_vm_struct) +*(.text.inode_setattr) +*(.text.inode_add_bytes) +*(.text.ide_read_24) +*(.text.ide_get_error_location) +*(.text.ide_do_drive_cmd) +*(.text.get_locked_pte) +*(.text.get_filesystem_list) +*(.text.generic_file_open) +*(.text.follow_down) +*(.text.find_next_bit) +*(.text.__find_first_bit) +*(.text.exit_mm) +*(.text.exec_keys) +*(.text.end_buffer_write_sync) +*(.text.end_bio_bh_io_sync) +*(.text.dummy_socket_shutdown) +*(.text.d_rehash) +*(.text.d_path) +*(.text.do_ioctl) +*(.text.dget_locked) +*(.text.copy_thread_group_keys) +*(.text.cdrom_end_request) +*(.text.cap_bprm_apply_creds) +*(.text.blk_rq_bio_prep) +*(.text.__bitmap_intersects) +*(.text.bio_phys_segments) +*(.text.bio_free) +*(.text.arch_get_unmapped_area_topdown) +*(.text.writeback_in_progress) +*(.text.vfs_follow_link) +*(.text.tcp_rcv_state_process) +*(.text.tcp_check_space) +*(.text.sys_stat) +*(.text.sys_rt_sigreturn) +*(.text.sys_rt_sigaction) +*(.text.sys_remap_file_pages) +*(.text.sys_pwrite64) +*(.text.sys_fchownat) +*(.text.sys_fchmodat) +*(.text.strncat) +*(.text.strlcat) +*(.text.strcmp) +*(.text.steal_locks) +*(.text.sock_create) +*(.text.sk_stream_rfree) +*(.text.sk_stream_mem_schedule) +*(.text.skip_atoi) +*(.text.sk_alloc) +*(.text.show_stat) +*(.text.set_fs_pwd) +*(.text.set_binfmt) +*(.text.pty_unthrottle) +*(.text.proc_symlink) +*(.text.pipe_release) +*(.text.pageout) +*(.text.n_tty_write_wakeup) +*(.text.n_tty_ioctl) +*(.text.nr_free_zone_pages) +*(.text.migration_thread) +*(.text.mempool_free_slab) +*(.text.meminfo_read_proc) +*(.text.max_sane_readahead) +*(.text.lru_cache_add) +*(.text.kill_fasync) +*(.text.kernel_read) +*(.text.invalidate_mapping_pages) +*(.text.inode_has_buffers) +*(.text.init_once) +*(.text.inet_sendmsg) +*(.text.idedisk_issue_flush) +*(.text.generic_file_write) +*(.text.free_more_memory) +*(.text.__free_fdtable) +*(.text.filp_dtor) +*(.text.exit_sem) +*(.text.exit_itimers) +*(.text.error_interrupt) +*(.text.end_buffer_async_write) +*(.text.eligible_child) +*(.text.elf_map) +*(.text.dump_task_regs) +*(.text.dummy_task_setscheduler) +*(.text.dummy_socket_accept) +*(.text.dummy_file_free_security) +*(.text.__down_read) +*(.text.do_sock_read) +*(.text.do_sigaltstack) +*(.text.do_mremap) +*(.text.current_io_context) +*(.text.cpu_swap_callback) +*(.text.copy_vma) +*(.text.cap_bprm_set_security) +*(.text.blk_insert_request) +*(.text.bio_map_kern_endio) +*(.text.bio_hw_segments) +*(.text.bictcp_cong_avoid) +*(.text.add_interrupt_randomness) +*(.text.wait_for_completion) +*(.text.version_read_proc) +*(.text.unix_write_space) +*(.text.tty_ldisc_ref_wait) +*(.text.tty_ldisc_put) +*(.text.try_to_wake_up) +*(.text.tcp_v4_tw_remember_stamp) +*(.text.tcp_try_undo_dsack) +*(.text.tcp_may_send_now) +*(.text.sys_waitid) +*(.text.sys_sched_getparam) +*(.text.sys_getppid) +*(.text.sys_getcwd) +*(.text.sys_dup2) +*(.text.sys_chmod) +*(.text.sys_chdir) +*(.text.sprintf) +*(.text.sock_wfree) +*(.text.sock_aio_write) +*(.text.skb_drop_fraglist) +*(.text.skb_dequeue) +*(.text.set_close_on_exec) +*(.text.set_brk) +*(.text.seq_puts) +*(.text.SELECT_DRIVE) +*(.text.sched_exec) +*(.text.return_EIO) +*(.text.remove_from_page_cache) +*(.text.rcu_start_batch) +*(.text.__put_task_struct) +*(.text.proc_pid_readdir) +*(.text.proc_get_inode) +*(.text.prepare_to_wait_exclusive) +*(.text.pipe_wait) +*(.text.pipe_new) +*(.text.pdflush_operation) +*(.text.__pagevec_release) +*(.text.pagevec_lookup_tag) +*(.text.packet_rcv) +*(.text.n_tty_set_room) +*(.text.nr_free_pages) +*(.text.__net_timestamp) +*(.text.mpage_end_io_read) +*(.text.mod_timer) +*(.text.__memcpy) +*(.text.mb_cache_shrink_fn) +*(.text.lock_rename) +*(.text.kstrdup) +*(.text.is_ignored) +*(.text.int_very_careful) +*(.text.inotify_inode_is_dead) +*(.text.inotify_get_cookie) +*(.text.inode_get_bytes) +*(.text.init_timer) +*(.text.init_dev) +*(.text.inet_getname) +*(.text.ide_map_sg) +*(.text.__ide_dma_end) +*(.text.hrtimer_get_remaining) +*(.text.get_task_mm) +*(.text.get_random_int) +*(.text.free_pipe_info) +*(.text.filemap_write_and_wait_range) +*(.text.exit_thread) +*(.text.enter_idle) +*(.text.end_that_request_first) +*(.text.end_8259A_irq) +*(.text.dummy_file_alloc_security) +*(.text.do_group_exit) +*(.text.debug_mutex_init) +*(.text.cpuset_exit) +*(.text.cpu_idle) +*(.text.copy_semundo) +*(.text.copy_files) +*(.text.chrdev_open) +*(.text.cdrom_transfer_packet_command) +*(.text.cdrom_mode_sense) +*(.text.blk_phys_contig_segment) +*(.text.blk_get_queue) +*(.text.bio_split) +*(.text.audit_alloc) +*(.text.anon_pipe_buf_release) +*(.text.add_wait_queue_exclusive) +*(.text.add_wait_queue) +*(.text.acct_process) +*(.text.account) +*(.text.zeromap_page_range) +*(.text.yield) +*(.text.writeback_acquire) +*(.text.worker_thread) +*(.text.wait_on_page_writeback_range) +*(.text.__wait_on_buffer) +*(.text.vscnprintf) +*(.text.vmalloc_to_pfn) +*(.text.vgacon_save_screen) +*(.text.vfs_unlink) +*(.text.vfs_rmdir) +*(.text.unregister_md_personality) +*(.text.unlock_new_inode) +*(.text.unix_stream_sendmsg) +*(.text.unix_stream_recvmsg) +*(.text.unhash_process) +*(.text.udp_v4_lookup_longway) +*(.text.tty_ldisc_flush) +*(.text.tty_ldisc_enable) +*(.text.tty_hung_up_p) +*(.text.tty_buffer_free_all) +*(.text.tso_fragment) +*(.text.try_to_del_timer_sync) +*(.text.tcp_v4_err) +*(.text.tcp_unhash) +*(.text.tcp_seq_next) +*(.text.tcp_select_initial_window) +*(.text.tcp_sacktag_write_queue) +*(.text.tcp_cwnd_validate) +*(.text.sys_vhangup) +*(.text.sys_uselib) +*(.text.sys_symlink) +*(.text.sys_signal) +*(.text.sys_poll) +*(.text.sys_mount) +*(.text.sys_kill) +*(.text.sys_ioctl) +*(.text.sys_inotify_add_watch) +*(.text.sys_getuid) +*(.text.sys_getrlimit) +*(.text.sys_getitimer) +*(.text.sys_getgroups) +*(.text.sys_ftruncate) +*(.text.sysfs_lookup) +*(.text.sys_exit_group) +*(.text.stub_fork) +*(.text.sscanf) +*(.text.sock_map_fd) +*(.text.sock_get_timestamp) +*(.text.__sock_create) +*(.text.smp_call_function_single) +*(.text.sk_stop_timer) +*(.text.skb_copy_and_csum_datagram) +*(.text.__skb_checksum_complete) +*(.text.single_next) +*(.text.sigqueue_alloc) +*(.text.shrink_dcache_parent) +*(.text.select_idle_routine) +*(.text.run_workqueue) +*(.text.run_local_timers) +*(.text.remove_inode_hash) +*(.text.remove_dquot_ref) +*(.text.register_binfmt) +*(.text.read_cache_pages) +*(.text.rb_last) +*(.text.pty_open) +*(.text.proc_root_readdir) +*(.text.proc_pid_flush) +*(.text.proc_pident_lookup) +*(.text.proc_fill_super) +*(.text.proc_exe_link) +*(.text.posix_locks_deadlock) +*(.text.pipe_iov_copy_from_user) +*(.text.opost) +*(.text.nf_register_hook) +*(.text.netif_rx_ni) +*(.text.m_start) +*(.text.mpage_writepage) +*(.text.mm_alloc) +*(.text.memory_open) +*(.text.mark_buffer_async_write) +*(.text.lru_add_drain_all) +*(.text.locks_init_lock) +*(.text.locks_delete_lock) +*(.text.lock_hrtimer_base) +*(.text.load_script) +*(.text.__kill_fasync) +*(.text.ip_mc_sf_allow) +*(.text.__ioremap) +*(.text.int_with_check) +*(.text.int_sqrt) +*(.text.install_thread_keyring) +*(.text.init_page_buffers) +*(.text.inet_sock_destruct) +*(.text.idle_notifier_register) +*(.text.ide_execute_command) +*(.text.ide_end_drive_cmd) +*(.text.__ide_dma_host_on) +*(.text.hrtimer_run_queues) +*(.text.hpet_mask_rtc_irq_bit) +*(.text.__get_zone_counts) +*(.text.get_zone_counts) +*(.text.get_write_access) +*(.text.get_fs_struct) +*(.text.get_dirty_limits) +*(.text.generic_readlink) +*(.text.free_hot_page) +*(.text.finish_wait) +*(.text.find_inode) +*(.text.find_first_bit) +*(.text.__filemap_fdatawrite_range) +*(.text.__filemap_copy_from_user_iovec) +*(.text.exit_aio) +*(.text.elv_set_request) +*(.text.elv_former_request) +*(.text.dup_namespace) +*(.text.dupfd) +*(.text.dummy_socket_getsockopt) +*(.text.dummy_sb_post_mountroot) +*(.text.dummy_quotactl) +*(.text.dummy_inode_rename) +*(.text.__do_SAK) +*(.text.do_pipe) +*(.text.do_fsync) +*(.text.d_instantiate_unique) +*(.text.d_find_alias) +*(.text.deny_write_access) +*(.text.dentry_unhash) +*(.text.d_delete) +*(.text.datagram_poll) +*(.text.cpuset_fork) +*(.text.cpuid_read) +*(.text.copy_namespace) +*(.text.cond_resched) +*(.text.check_version) +*(.text.__change_page_attr) +*(.text.cfq_slab_kill) +*(.text.cfq_completed_request) +*(.text.cdrom_pc_intr) +*(.text.cdrom_decode_status) +*(.text.cap_capset_check) +*(.text.blk_put_request) +*(.text.bio_fs_destructor) +*(.text.bictcp_min_cwnd) +*(.text.alloc_chrdev_region) +*(.text.add_element) +*(.text.acct_update_integrals) +*(.text.write_boundary_block) +*(.text.writeback_release) +*(.text.writeback_inodes) +*(.text.wake_up_state) +*(.text.__wake_up_locked) +*(.text.wake_futex) +*(.text.wait_task_inactive) +*(.text.__wait_on_freeing_inode) +*(.text.wait_noreap_copyout) +*(.text.vmstat_start) +*(.text.vgacon_do_font_op) +*(.text.vfs_readv) +*(.text.vfs_quota_sync) +*(.text.update_queue) +*(.text.unshare_files) +*(.text.unmap_vm_area) +*(.text.unix_socketpair) +*(.text.unix_release_sock) +*(.text.unix_detach_fds) +*(.text.unix_create1) +*(.text.unix_bind) +*(.text.udp_sendmsg) +*(.text.udp_rcv) +*(.text.udp_queue_rcv_skb) +*(.text.uart_write) +*(.text.uart_startup) +*(.text.uart_open) +*(.text.tty_vhangup) +*(.text.tty_termios_baud_rate) +*(.text.tty_release) +*(.text.tty_ldisc_ref) +*(.text.throttle_vm_writeout) +*(.text.058) +*(.text.tcp_xmit_probe_skb) +*(.text.tcp_v4_send_check) +*(.text.tcp_v4_destroy_sock) +*(.text.tcp_sync_mss) +*(.text.tcp_snd_test) +*(.text.tcp_slow_start) +*(.text.tcp_send_fin) +*(.text.tcp_rtt_estimator) +*(.text.tcp_parse_options) +*(.text.tcp_ioctl) +*(.text.tcp_init_tso_segs) +*(.text.tcp_init_cwnd) +*(.text.tcp_getsockopt) +*(.text.tcp_fin) +*(.text.tcp_connect) +*(.text.tcp_cong_avoid) +*(.text.__tcp_checksum_complete_user) +*(.text.task_dumpable) +*(.text.sys_wait4) +*(.text.sys_utimes) +*(.text.sys_symlinkat) +*(.text.sys_socketpair) +*(.text.sys_rmdir) +*(.text.sys_readahead) +*(.text.sys_nanosleep) +*(.text.sys_linkat) +*(.text.sys_fstat) +*(.text.sysfs_readdir) +*(.text.sys_execve) +*(.text.sysenter_tracesys) +*(.text.sys_chown) +*(.text.stub_clone) +*(.text.strrchr) +*(.text.strncpy) +*(.text.stopmachine_set_state) +*(.text.sock_sendmsg) +*(.text.sock_release) +*(.text.sock_fasync) +*(.text.sock_close) +*(.text.sk_stream_write_space) +*(.text.sk_reset_timer) +*(.text.skb_split) +*(.text.skb_recv_datagram) +*(.text.skb_queue_tail) +*(.text.sk_attach_filter) +*(.text.si_swapinfo) +*(.text.simple_strtoll) +*(.text.set_termios) +*(.text.set_task_comm) +*(.text.set_shrinker) +*(.text.set_normalized_timespec) +*(.text.set_brk) +*(.text.serial_in) +*(.text.seq_printf) +*(.text.secure_dccp_sequence_number) +*(.text.rwlock_bug) +*(.text.rt_hash_code) +*(.text.__rta_fill) +*(.text.__request_resource) +*(.text.relocate_new_kernel) +*(.text.release_thread) +*(.text.release_mem) +*(.text.rb_prev) +*(.text.rb_first) +*(.text.random_poll) +*(.text.__put_super_and_need_restart) +*(.text.pty_write) +*(.text.ptrace_stop) +*(.text.proc_self_readlink) +*(.text.proc_root_lookup) +*(.text.proc_root_link) +*(.text.proc_pid_make_inode) +*(.text.proc_pid_attr_write) +*(.text.proc_lookupfd) +*(.text.proc_delete_inode) +*(.text.posix_same_owner) +*(.text.posix_block_lock) +*(.text.poll_initwait) +*(.text.pipe_write) +*(.text.pipe_read_fasync) +*(.text.pipe_ioctl) +*(.text.pdflush) +*(.text.pci_user_read_config_dword) +*(.text.page_readlink) +*(.text.null_lseek) +*(.text.nf_hook_slow) +*(.text.netlink_sock_destruct) +*(.text.netlink_broadcast) +*(.text.neigh_resolve_output) +*(.text.name_to_int) +*(.text.mwait_idle) +*(.text.mutex_trylock) +*(.text.mutex_debug_check_no_locks_held) +*(.text.m_stop) +*(.text.mpage_end_io_write) +*(.text.mpage_alloc) +*(.text.move_page_tables) +*(.text.mounts_open) +*(.text.__memset) +*(.text.memcpy_fromiovec) +*(.text.make_8259A_irq) +*(.text.lookup_user_key_possessed) +*(.text.lookup_create) +*(.text.locks_insert_lock) +*(.text.locks_alloc_lock) +*(.text.kthread_should_stop) +*(.text.kswapd) +*(.text.kobject_uevent) +*(.text.kobject_get_path) +*(.text.kobject_get) +*(.text.klist_children_put) +*(.text.__ip_route_output_key) +*(.text.ip_flush_pending_frames) +*(.text.ip_compute_csum) +*(.text.ip_append_data) +*(.text.ioc_set_batching) +*(.text.invalidate_inode_pages) +*(.text.__invalidate_device) +*(.text.install_arg_page) +*(.text.in_sched_functions) +*(.text.inotify_unmount_inodes) +*(.text.init_once) +*(.text.init_cdrom_command) +*(.text.inet_stream_connect) +*(.text.inet_sk_rebuild_header) +*(.text.inet_csk_addr2sockaddr) +*(.text.inet_create) +*(.text.ifind) +*(.text.ide_setup_dma) +*(.text.ide_outsw) +*(.text.ide_fixstring) +*(.text.ide_dma_setup) +*(.text.ide_cdrom_packet) +*(.text.ide_cd_put) +*(.text.ide_build_sglist) +*(.text.i8259A_shutdown) +*(.text.hung_up_tty_ioctl) +*(.text.hrtimer_nanosleep) +*(.text.hrtimer_init) +*(.text.hrtimer_cancel) +*(.text.hash_futex) +*(.text.group_send_sig_info) +*(.text.grab_cache_page_nowait) +*(.text.get_wchan) +*(.text.get_stack) +*(.text.get_page_state) +*(.text.getnstimeofday) +*(.text.get_node) +*(.text.get_kprobe) +*(.text.generic_unplug_device) +*(.text.free_task) +*(.text.frag_show) +*(.text.find_next_zero_string) +*(.text.filp_open) +*(.text.fillonedir) +*(.text.exit_io_context) +*(.text.exit_idle) +*(.text.exact_lock) +*(.text.eth_header) +*(.text.dummy_unregister_security) +*(.text.dummy_socket_post_create) +*(.text.dummy_socket_listen) +*(.text.dummy_quota_on) +*(.text.dummy_inode_follow_link) +*(.text.dummy_file_receive) +*(.text.dummy_file_mprotect) +*(.text.dummy_file_lock) +*(.text.dummy_file_ioctl) +*(.text.dummy_bprm_post_apply_creds) +*(.text.do_writepages) +*(.text.__down_interruptible) +*(.text.do_notify_resume) +*(.text.do_acct_process) +*(.text.del_timer_sync) +*(.text.default_rebuild_header) +*(.text.d_callback) +*(.text.dcache_readdir) +*(.text.ctrl_dumpfamily) +*(.text.cpuset_rmdir) +*(.text.copy_strings_kernel) +*(.text.con_write_room) +*(.text.complete_all) +*(.text.collect_sigign_sigcatch) +*(.text.clear_user) +*(.text.check_unthrottle) +*(.text.cdrom_release) +*(.text.cdrom_newpc_intr) +*(.text.cdrom_ioctl) +*(.text.cdrom_check_status) +*(.text.cdev_put) +*(.text.cdev_add) +*(.text.cap_ptrace) +*(.text.cap_bprm_secureexec) +*(.text.cache_alloc_refill) +*(.text.bmap) +*(.text.blk_run_queue) +*(.text.blk_queue_dma_alignment) +*(.text.blk_ordered_req_seq) +*(.text.blk_backing_dev_unplug) +*(.text.__bitmap_subset) +*(.text.__bitmap_and) +*(.text.bio_unmap_user) +*(.text.__bforget) +*(.text.bd_forget) +*(.text.bad_pipe_w) +*(.text.bad_get_user) +*(.text.audit_free) +*(.text.anon_vma_ctor) +*(.text.anon_pipe_buf_map) +*(.text.alloc_sock_iocb) +*(.text.alloc_fdset) +*(.text.aio_kick_handler) +*(.text.__add_entropy_words) +*(.text.add_disk_randomness) diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 02fc7fa0ea2..6df05e6034f 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -26,6 +26,7 @@ */ .text + .section .bootstrap.text .code32 .globl startup_32 /* %bx: 1 if coming from smp trampoline on secondary cpu */ @@ -192,7 +193,8 @@ startup_64: movq initial_code(%rip),%rax jmp *%rax - /* SMP bootup changes these two */ + /* SMP bootup changes these two */ + .align 8 .globl initial_code initial_code: .quad x86_64_start_kernel @@ -237,7 +239,7 @@ ENTRY(no_long_mode) .org 0xf00 .globl pGDT32 pGDT32: - .word gdt_end-cpu_gdt_table + .word gdt_end-cpu_gdt_table-1 .long cpu_gdt_table-__START_KERNEL_map .org 0xf10 @@ -293,8 +295,6 @@ NEXT_PAGE(level2_kernel_pgt) /* Module mapping starts here */ .fill 492,8,0 -NEXT_PAGE(empty_zero_page) - NEXT_PAGE(level3_physmem_pgt) .quad phys_level2_kernel_pgt | 0x007 /* so that __va works even before pagetable_init */ .fill 511,8,0 @@ -337,7 +337,7 @@ ENTRY(boot_level4_pgt) .align 16 .globl cpu_gdt_descr cpu_gdt_descr: - .word gdt_end-cpu_gdt_table + .word gdt_end-cpu_gdt_table-1 gdt: .quad cpu_gdt_table #ifdef CONFIG_SMP @@ -352,7 +352,8 @@ gdt: * Also sysret mandates a special GDT layout */ -.align PAGE_SIZE + .section .data.page_aligned, "aw" + .align PAGE_SIZE /* The TLS descriptors are currently at a different place compared to i386. Hopefully nobody expects them at a fixed place (Wine?) */ @@ -378,9 +379,12 @@ gdt_end: /* zero the remaining page */ .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0 -ENTRY(idt_table) - .rept 256 - .quad 0 - .quad 0 - .endr + .section .bss, "aw", @nobits + .align L1_CACHE_BYTES +ENTRY(idt_table) + .skip 256 * 16 + .section .bss.page_aligned, "aw", @nobits + .align PAGE_SIZE +ENTRY(empty_zero_page) + .skip PAGE_SIZE diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index ffed464e6b1..77b4c608cca 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -50,7 +50,7 @@ static int no_timer_check; int disable_timer_pin_1 __initdata; -int timer_over_8254 __initdata = 1; +int timer_over_8254 __initdata = 0; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; @@ -310,7 +310,7 @@ void __init check_ioapic(void) force_iommu) && !iommu_aperture_allowed) { printk(KERN_INFO - "Looks like a VIA chipset. Disabling IOMMU. Overwrite with \"iommu=allowed\"\n"); + "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n"); iommu_aperture_disabled = 1; } #endif @@ -1848,7 +1848,7 @@ static inline void check_timer(void) */ setup_ExtINT_IRQ0_pin(apic2, pin2, vector); if (timer_irq_works()) { - printk("works.\n"); + apic_printk(APIC_VERBOSE," works.\n"); nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); @@ -1860,7 +1860,7 @@ static inline void check_timer(void) */ clear_IO_APIC_pin(apic2, pin2); } - printk(" failed.\n"); + apic_printk(APIC_VERBOSE," failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); @@ -1875,7 +1875,7 @@ static inline void check_timer(void) enable_8259A_irq(0); if (timer_irq_works()) { - apic_printk(APIC_QUIET, " works.\n"); + apic_printk(APIC_VERBOSE," works.\n"); return; } apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 14f0ced613b..accbff3fec4 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -37,10 +37,12 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/preempt.h> +#include <linux/module.h> #include <asm/cacheflush.h> #include <asm/pgtable.h> #include <asm/kdebug.h> +#include <asm/uaccess.h> void jprobe_return_end(void); static void __kprobes arch_copy_kprobe(struct kprobe *p); @@ -578,16 +580,62 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + const struct exception_table_entry *fixup; - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs, kcb); + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the rip points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->rip = (unsigned long)cur->addr; regs->eflags |= kcb->kprobe_old_rflags; - - reset_current_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + fixup = search_exception_tables(regs->rip); + if (fixup) { + regs->rip = fixup->fixup; + return 1; + } + + /* + * fixup() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; } return 0; } @@ -601,6 +649,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 9013a90b5c2..b17cf3eba35 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -106,11 +106,11 @@ static int __init mpf_checksum(unsigned char *mp, int len) return sum & 0xFF; } -static void __init MP_processor_info (struct mpc_config_processor *m) +static void __cpuinit MP_processor_info (struct mpc_config_processor *m) { int cpu; unsigned char ver; - static int found_bsp=0; + cpumask_t tmp_map; if (!(m->mpc_cpuflag & CPU_ENABLED)) { disabled_cpus++; @@ -133,8 +133,10 @@ static void __init MP_processor_info (struct mpc_config_processor *m) return; } - cpu = num_processors++; - + num_processors++; + cpus_complement(tmp_map, cpu_present_map); + cpu = first_cpu(tmp_map); + #if MAX_APICS < 255 if ((int)m->mpc_apicid > MAX_APICS) { printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", @@ -160,12 +162,7 @@ static void __init MP_processor_info (struct mpc_config_processor *m) * entry is BSP, and so on. */ cpu = 0; - - bios_cpu_apicid[0] = m->mpc_apicid; - x86_cpu_to_apicid[0] = m->mpc_apicid; - found_bsp = 1; - } else - cpu = num_processors - found_bsp; + } bios_cpu_apicid[cpu] = m->mpc_apicid; x86_cpu_to_apicid[cpu] = m->mpc_apicid; @@ -691,7 +688,7 @@ void __init mp_register_lapic_address ( } -void __init mp_register_lapic ( +void __cpuinit mp_register_lapic ( u8 id, u8 enabled) { diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 66c009e10ba..d9e4067faf0 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -534,6 +534,7 @@ asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code) void set_nmi_callback(nmi_callback_t callback) { + vmalloc_sync_all(); rcu_assign_pointer(nmi_callback, callback); } diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 4ed391edd47..03c9eeedb0f 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -73,6 +73,9 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dma_mask == 0) dma_mask = 0xffffffff; + /* Don't invoke OOM killer */ + gfp |= __GFP_NORETRY; + /* Kludge to make it bug-to-bug compatible with i386. i386 uses the normal dma_mask for alloc_coherent. */ dma_mask &= *dev->dma_mask; diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index 0c3f052ba6c..a6c01e12126 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -65,9 +65,7 @@ static u32 gart_unmapped_entry; #define for_all_nb(dev) \ dev = NULL; \ - while ((dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1103, dev))!=NULL)\ - if (dev->bus->number == 0 && \ - (PCI_SLOT(dev->devfn) >= 24) && (PCI_SLOT(dev->devfn) <= 31)) + while ((dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1103, dev))!=NULL) static struct pci_dev *northbridges[MAX_NB]; static u32 northbridge_flush_word[MAX_NB]; @@ -148,9 +146,12 @@ static void flush_gart(struct device *dev) if (!northbridges[i]) continue; /* Make sure the hardware actually executed the flush. */ - do { + for (;;) { pci_read_config_dword(northbridges[i], 0x9c, &w); - } while (w & 1); + if (!(w & 1)) + break; + cpu_relax(); + } } if (!flushed) printk("nothing to flush?\n"); diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c index 5c51d10408a..ee5ee4891f3 100644 --- a/arch/x86_64/kernel/pmtimer.c +++ b/arch/x86_64/kernel/pmtimer.c @@ -86,7 +86,7 @@ static unsigned pmtimer_wait_tick(void) for (a = b = inl(pmtmr_ioport) & ACPI_PM_MASK; a == b; b = inl(pmtmr_ioport) & ACPI_PM_MASK) - ; + cpu_relax(); return b; } @@ -97,6 +97,7 @@ void pmtimer_wait(unsigned us) a = pmtimer_wait_tick(); do { b = inl(pmtmr_ioport); + cpu_relax(); } while (cyc2us(b - a) < us); } diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 80a8f307917..70dd8e5c688 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -35,8 +35,8 @@ #include <linux/ptrace.h> #include <linux/utsname.h> #include <linux/random.h> -#include <linux/kprobes.h> #include <linux/notifier.h> +#include <linux/kprobes.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -66,24 +66,17 @@ EXPORT_SYMBOL(boot_option_idle_override); void (*pm_idle)(void); static DEFINE_PER_CPU(unsigned int, cpu_idle_state); -static struct notifier_block *idle_notifier; -static DEFINE_SPINLOCK(idle_notifier_lock); +static ATOMIC_NOTIFIER_HEAD(idle_notifier); void idle_notifier_register(struct notifier_block *n) { - unsigned long flags; - spin_lock_irqsave(&idle_notifier_lock, flags); - notifier_chain_register(&idle_notifier, n); - spin_unlock_irqrestore(&idle_notifier_lock, flags); + atomic_notifier_chain_register(&idle_notifier, n); } EXPORT_SYMBOL_GPL(idle_notifier_register); void idle_notifier_unregister(struct notifier_block *n) { - unsigned long flags; - spin_lock_irqsave(&idle_notifier_lock, flags); - notifier_chain_unregister(&idle_notifier, n); - spin_unlock_irqrestore(&idle_notifier_lock, flags); + atomic_notifier_chain_unregister(&idle_notifier, n); } EXPORT_SYMBOL(idle_notifier_unregister); @@ -93,13 +86,13 @@ static DEFINE_PER_CPU(enum idle_state, idle_state) = CPU_NOT_IDLE; void enter_idle(void) { __get_cpu_var(idle_state) = CPU_IDLE; - notifier_call_chain(&idle_notifier, IDLE_START, NULL); + atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); } static void __exit_idle(void) { __get_cpu_var(idle_state) = CPU_NOT_IDLE; - notifier_call_chain(&idle_notifier, IDLE_END, NULL); + atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); } /* Called from interrupts to signify idle end */ @@ -353,13 +346,6 @@ void exit_thread(void) struct task_struct *me = current; struct thread_struct *t = &me->thread; - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(me); - if (me->thread.io_bitmap_ptr) { struct tss_struct *tss = &per_cpu(init_tss, get_cpu()); @@ -508,7 +494,7 @@ out: /* * This special macro can be used to load a debugging register */ -#define loaddebug(thread,r) set_debug(thread->debugreg ## r, r) +#define loaddebug(thread,r) set_debugreg(thread->debugreg ## r, r) /* * switch_to(x,y) should switch tasks from x to y. @@ -527,8 +513,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); - unlazy_fpu(prev_p); - /* * Reload esp0, LDT and the page table pointer: */ @@ -586,11 +570,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) } /* - * Switch the PDA context. + * Switch the PDA and FPU contexts. */ prev->userrsp = read_pda(oldrsp); write_pda(oldrsp, next->userrsp); write_pda(pcurrent, next_p); + /* This must be here to ensure both math_state_restore() and + kernel_fpu_begin() work consistently. */ + unlazy_fpu(prev_p); write_pda(kernelstack, task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index 53205622351..d44b2c1e63a 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -420,9 +420,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case offsetof(struct user, u_debugreg[7]): /* See arch/i386/kernel/ptrace.c for an explanation of * this awkward check.*/ - data &= ~DR_CONTROL_RESERVED; - for(i=0; i<4; i++) - if ((0x5454 >> ((data >> (16 + 4*i)) & 0xf)) & 1) + data &= ~DR_CONTROL_RESERVED; + for(i=0; i<4; i++) + if ((0x5554 >> ((data >> (16 + 4*i)) & 0xf)) & 1) break; if (i == 4) { child->thread.debugreg7 = data; diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index f227d0c23dc..d1f3e9272c0 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -46,6 +46,7 @@ #include <linux/cpufreq.h> #include <linux/dmi.h> #include <linux/dma-mapping.h> +#include <linux/ctype.h> #include <asm/mtrr.h> #include <asm/uaccess.h> @@ -67,6 +68,7 @@ #include <asm/swiotlb.h> #include <asm/sections.h> #include <asm/gart-mapping.h> +#include <asm/dmi.h> /* * Machine setup.. @@ -91,6 +93,12 @@ int bootloader_type; unsigned long saved_video_mode; +/* + * Early DMI memory + */ +int dmi_alloc_index; +char dmi_alloc_data[DMI_MAX_DATA]; + /* * Setup options */ @@ -270,6 +278,13 @@ static void __init probe_roms(void) } } +/* Check for full argument with no trailing characters */ +static int fullarg(char *p, char *arg) +{ + int l = strlen(arg); + return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l])); +} + static __init void parse_cmdline_early (char ** cmdline_p) { char c = ' ', *to = command_line, *from = COMMAND_LINE; @@ -293,10 +308,10 @@ static __init void parse_cmdline_early (char ** cmdline_p) #endif #ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter init */ - if (!memcmp(from, "acpi=off", 8)) + if (fullarg(from,"acpi=off")) disable_acpi(); - if (!memcmp(from, "acpi=force", 10)) { + if (fullarg(from, "acpi=force")) { /* add later when we do DMI horrors: */ acpi_force = 1; acpi_disabled = 0; @@ -304,52 +319,47 @@ static __init void parse_cmdline_early (char ** cmdline_p) /* acpi=ht just means: do ACPI MADT parsing at bootup, but don't enable the full ACPI interpreter */ - if (!memcmp(from, "acpi=ht", 7)) { + if (fullarg(from, "acpi=ht")) { if (!acpi_force) disable_acpi(); acpi_ht = 1; } - else if (!memcmp(from, "pci=noacpi", 10)) + else if (fullarg(from, "pci=noacpi")) acpi_disable_pci(); - else if (!memcmp(from, "acpi=noirq", 10)) + else if (fullarg(from, "acpi=noirq")) acpi_noirq_set(); - else if (!memcmp(from, "acpi_sci=edge", 13)) + else if (fullarg(from, "acpi_sci=edge")) acpi_sci_flags.trigger = 1; - else if (!memcmp(from, "acpi_sci=level", 14)) + else if (fullarg(from, "acpi_sci=level")) acpi_sci_flags.trigger = 3; - else if (!memcmp(from, "acpi_sci=high", 13)) + else if (fullarg(from, "acpi_sci=high")) acpi_sci_flags.polarity = 1; - else if (!memcmp(from, "acpi_sci=low", 12)) + else if (fullarg(from, "acpi_sci=low")) acpi_sci_flags.polarity = 3; /* acpi=strict disables out-of-spec workarounds */ - else if (!memcmp(from, "acpi=strict", 11)) { + else if (fullarg(from, "acpi=strict")) { acpi_strict = 1; } #ifdef CONFIG_X86_IO_APIC - else if (!memcmp(from, "acpi_skip_timer_override", 24)) + else if (fullarg(from, "acpi_skip_timer_override")) acpi_skip_timer_override = 1; #endif #endif - if (!memcmp(from, "disable_timer_pin_1", 19)) + if (fullarg(from, "disable_timer_pin_1")) disable_timer_pin_1 = 1; - if (!memcmp(from, "enable_timer_pin_1", 18)) + if (fullarg(from, "enable_timer_pin_1")) disable_timer_pin_1 = -1; - if (!memcmp(from, "nolapic", 7) || - !memcmp(from, "disableapic", 11)) + if (fullarg(from, "nolapic") || fullarg(from, "disableapic")) disable_apic = 1; - /* Don't confuse with noapictimer */ - if (!memcmp(from, "noapic", 6) && - (from[6] == ' ' || from[6] == 0)) + if (fullarg(from, "noapic")) skip_ioapic_setup = 1; - /* Make sure to not confuse with apic= */ - if (!memcmp(from, "apic", 4) && - (from[4] == ' ' || from[4] == 0)) { + if (fullarg(from,"apic")) { skip_ioapic_setup = 0; ioapic_force = 1; } @@ -388,7 +398,7 @@ static __init void parse_cmdline_early (char ** cmdline_p) iommu_setup(from+6); } - if (!memcmp(from,"oops=panic", 10)) + if (fullarg(from,"oops=panic")) panic_on_oops = 1; if (!memcmp(from, "noexec=", 7)) @@ -611,11 +621,14 @@ void __init setup_arch(char **cmdline_p) * we are rounding upwards: */ end_pfn = e820_end_of_ram(); + num_physpages = end_pfn; /* for pfn_valid */ check_efer(); init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); + dmi_scan_machine(); + zap_low_mappings(0); #ifdef CONFIG_ACPI @@ -708,6 +721,12 @@ void __init setup_arch(char **cmdline_p) check_ioapic(); + /* + * set this early, so we dont allocate cpu0 + * if MADT list doesnt list BSP first + * mpparse.c/MP_processor_info() allocates logical cpu numbers. + */ + cpu_set(0, cpu_present_map); #ifdef CONFIG_ACPI /* * Read APIC and some other early information from ACPI tables. @@ -836,7 +855,7 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) unsigned bits; #ifdef CONFIG_NUMA int node = 0; - unsigned apicid = phys_proc_id[cpu]; + unsigned apicid = hard_smp_processor_id(); #endif bits = 0; @@ -846,7 +865,7 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) /* Low order bits define the core id (index of core in socket) */ cpu_core_id[cpu] = phys_proc_id[cpu] & ((1 << bits)-1); /* Convert the APIC ID into the socket ID */ - phys_proc_id[cpu] >>= bits; + phys_proc_id[cpu] = phys_pkg_id(bits); #ifdef CONFIG_NUMA node = phys_proc_id[cpu]; @@ -872,8 +891,8 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) } numa_set_node(cpu, node); - printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", - cpu, c->x86_max_cores, node, cpu_core_id[cpu]); + printk(KERN_INFO "CPU %d/%x(%d) -> Node %d -> Core %d\n", + cpu, apicid, c->x86_max_cores, node, cpu_core_id[cpu]); #endif #endif } @@ -927,8 +946,6 @@ static int __init init_amd(struct cpuinfo_x86 *c) if (c->extended_cpuid_level >= 0x80000008) { c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; - if (c->x86_max_cores & (c->x86_max_cores - 1)) - c->x86_max_cores = 1; amd_detect_cmp(c); } @@ -945,7 +962,6 @@ static void __cpuinit detect_ht(struct cpuinfo_x86 *c) cpuid(1, &eax, &ebx, &ecx, &edx); - c->apicid = phys_pkg_id(0); if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; @@ -1154,6 +1170,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->x86_capability[2] = cpuid_edx(0x80860001); } + c->apicid = phys_pkg_id(0); + /* * Vendor-specific initialization. In this section we * canonicalize the feature flags, meaning if there are @@ -1261,7 +1279,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ - "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est", + "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, @@ -1402,10 +1420,3 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -static int __init run_dmi_scan(void) -{ - dmi_scan_machine(); - return 0; -} -core_initcall(run_dmi_scan); - diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 70f1bb808a2..eabdb63fec3 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -33,7 +33,7 @@ cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly; struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned; -struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; +struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); @@ -59,7 +59,7 @@ int __init nonx_setup(char *str) } __setup("noexec=", nonx_setup); /* parsed early actually */ -int force_personality32 = READ_IMPLIES_EXEC; +int force_personality32 = 0; /* noexec32=on|off Control non executable heap for 32bit processes. @@ -248,7 +248,7 @@ void __cpuinit cpu_init (void) switch (v + 1) { #if DEBUG_STKSZ > EXCEPTION_STKSZ case DEBUG_STACK: - cpu_pda[cpu].debugstack = (unsigned long)estacks; + cpu_pda(cpu)->debugstack = (unsigned long)estacks; estacks += DEBUG_STKSZ; break; #endif @@ -281,12 +281,12 @@ void __cpuinit cpu_init (void) * Clear all 6 debug registers: */ - set_debug(0UL, 0); - set_debug(0UL, 1); - set_debug(0UL, 2); - set_debug(0UL, 3); - set_debug(0UL, 6); - set_debug(0UL, 7); + set_debugreg(0UL, 0); + set_debugreg(0UL, 1); + set_debugreg(0UL, 2); + set_debugreg(0UL, 3); + set_debugreg(0UL, 6); + set_debugreg(0UL, 7); fpu_init(); } diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 19ef012b1f1..4a6628b14d9 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -75,7 +75,7 @@ static inline void leave_mm(int cpu) { if (read_pda(mmu_state) == TLBSTATE_OK) BUG(); - clear_bit(cpu, &read_pda(active_mm)->cpu_vm_mask); + cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask); load_cr3(swapper_pg_dir); } @@ -85,7 +85,7 @@ static inline void leave_mm(int cpu) * [cpu0: the cpu that switches] * 1) switch_mm() either 1a) or 1b) * 1a) thread switch to a different mm - * 1a1) clear_bit(cpu, &old_mm->cpu_vm_mask); + * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); * Stop ipi delivery for the old mm. This is not synchronized with * the other cpus, but smp_invalidate_interrupt ignore flush ipis * for the wrong mm, and in the worst case we perform a superfluous @@ -95,7 +95,7 @@ static inline void leave_mm(int cpu) * was in lazy tlb mode. * 1a3) update cpu active_mm * Now cpu0 accepts tlb flushes for the new mm. - * 1a4) set_bit(cpu, &new_mm->cpu_vm_mask); + * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask); * Now the other cpus will send tlb flush ipis. * 1a4) change cr3. * 1b) thread switch without mm change diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 66e98659d07..ea48fa63807 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -68,6 +68,9 @@ u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; /* core ID of each logical CPU */ u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; +/* Last level cache ID of each logical CPU */ +u8 cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID}; + /* Bitmask of currently online CPUs */ cpumask_t cpu_online_map __read_mostly; @@ -445,6 +448,18 @@ void __cpuinit smp_callin(void) cpu_set(cpuid, cpu_callin_map); } +/* maps the cpu to the sched domain representing multi-core */ +cpumask_t cpu_coregroup_map(int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + /* + * For perf, we return last level cache shared map. + * TBD: when power saving sched policy is added, we will return + * cpu_core_map when power saving policy is enabled + */ + return c->llc_shared_map; +} + /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; @@ -463,12 +478,16 @@ static inline void set_cpu_sibling_map(int cpu) cpu_set(cpu, cpu_sibling_map[i]); cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); } } } else { cpu_set(cpu, cpu_sibling_map[cpu]); } + cpu_set(cpu, c[cpu].llc_shared_map); + if (current_cpu_data.x86_max_cores == 1) { cpu_core_map[cpu] = cpu_sibling_map[cpu]; c[cpu].booted_cores = 1; @@ -476,6 +495,11 @@ static inline void set_cpu_sibling_map(int cpu) } for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (cpu_llc_id[cpu] != BAD_APICID && + cpu_llc_id[cpu] == cpu_llc_id[i]) { + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); + } if (phys_proc_id[cpu] == phys_proc_id[i]) { cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index ee5ce3d3cbc..473b514b66e 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -88,7 +88,8 @@ static inline unsigned int do_gettimeoffset_tsc(void) unsigned long t; unsigned long x; t = get_cycles_sync(); - if (t < vxtime.last_tsc) t = vxtime.last_tsc; /* hack */ + if (t < vxtime.last_tsc) + t = vxtime.last_tsc; /* hack */ x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> 32; return x; } @@ -178,8 +179,9 @@ unsigned long profile_pc(struct pt_regs *regs) { unsigned long pc = instruction_pointer(regs); - /* Assume the lock function has either no stack frame or only a single word. - This checks if the address on the stack looks like a kernel text address. + /* Assume the lock function has either no stack frame or only a single + word. This checks if the address on the stack looks like a kernel + text address. There is a small window for false hits, but in that case the tick is just accounted to the spinlock function. Better would be to write these functions in assembler again @@ -242,17 +244,10 @@ static void set_rtc_mmss(unsigned long nowtime) real_minutes += 30; /* correct for half hour time zone */ real_minutes %= 60; -#if 0 - /* AMD 8111 is a really bad time keeper and hits this regularly. - It probably was an attempt to avoid screwing up DST, but ignore - that for now. */ if (abs(real_minutes - cmos_minutes) >= 30) { printk(KERN_WARNING "time.c: can't update CMOS clock " "from %d to %d\n", cmos_minutes, real_minutes); - } else -#endif - - { + } else { BIN_TO_BCD(real_seconds); BIN_TO_BCD(real_minutes); CMOS_WRITE(real_seconds, RTC_SECONDS); @@ -293,8 +288,7 @@ unsigned long long monotonic_clock(void) this_offset = hpet_readl(HPET_COUNTER); } while (read_seqretry(&xtime_lock, seq)); offset = (this_offset - last_offset); - offset *=(NSEC_PER_SEC/HZ)/hpet_tick; - return base + offset; + offset *= (NSEC_PER_SEC/HZ) / hpet_tick; } else { do { seq = read_seqbegin(&xtime_lock); @@ -303,50 +297,46 @@ unsigned long long monotonic_clock(void) base = monotonic_base; } while (read_seqretry(&xtime_lock, seq)); this_offset = get_cycles_sync(); - offset = (this_offset - last_offset)*1000/cpu_khz; - return base + offset; + offset = (this_offset - last_offset)*1000 / cpu_khz; } + return base + offset; } EXPORT_SYMBOL(monotonic_clock); static noinline void handle_lost_ticks(int lost, struct pt_regs *regs) { - static long lost_count; - static int warned; - - if (report_lost_ticks) { - printk(KERN_WARNING "time.c: Lost %d timer " - "tick(s)! ", lost); - print_symbol("rip %s)\n", regs->rip); - } - - if (lost_count == 1000 && !warned) { - printk(KERN_WARNING - "warning: many lost ticks.\n" - KERN_WARNING "Your time source seems to be instable or " + static long lost_count; + static int warned; + if (report_lost_ticks) { + printk(KERN_WARNING "time.c: Lost %d timer tick(s)! ", lost); + print_symbol("rip %s)\n", regs->rip); + } + + if (lost_count == 1000 && !warned) { + printk(KERN_WARNING "warning: many lost ticks.\n" + KERN_WARNING "Your time source seems to be instable or " "some driver is hogging interupts\n"); - print_symbol("rip %s\n", regs->rip); - if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) { - printk(KERN_WARNING "Falling back to HPET\n"); - if (hpet_use_timer) - vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - vxtime.last = hpet_readl(HPET_COUNTER); - vxtime.mode = VXTIME_HPET; - do_gettimeoffset = do_gettimeoffset_hpet; - } - /* else should fall back to PIT, but code missing. */ - warned = 1; - } else - lost_count++; + print_symbol("rip %s\n", regs->rip); + if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) { + printk(KERN_WARNING "Falling back to HPET\n"); + if (hpet_use_timer) + vxtime.last = hpet_readl(HPET_T0_CMP) - + hpet_tick; + else + vxtime.last = hpet_readl(HPET_COUNTER); + vxtime.mode = VXTIME_HPET; + do_gettimeoffset = do_gettimeoffset_hpet; + } + /* else should fall back to PIT, but code missing. */ + warned = 1; + } else + lost_count++; #ifdef CONFIG_CPU_FREQ - /* In some cases the CPU can change frequency without us noticing - (like going into thermal throttle) - Give cpufreq a change to catch up. */ - if ((lost_count+1) % 25 == 0) { - cpufreq_delayed_get(); - } + /* In some cases the CPU can change frequency without us noticing + Give cpufreq a change to catch up. */ + if ((lost_count+1) % 25 == 0) + cpufreq_delayed_get(); #endif } @@ -354,7 +344,7 @@ void main_timer_handler(struct pt_regs *regs) { static unsigned long rtc_update = 0; unsigned long tsc; - int delay, offset = 0, lost = 0; + int delay = 0, offset = 0, lost = 0; /* * Here we are in the timer irq handler. We have irqs locally disabled (so we @@ -375,7 +365,7 @@ void main_timer_handler(struct pt_regs *regs) */ offset = hpet_readl(HPET_T0_CMP) - hpet_tick; delay = hpet_readl(HPET_COUNTER) - offset; - } else { + } else if (!pmtmr_ioport) { spin_lock(&i8253_lock); outb_p(0x00, 0x43); delay = inb_p(0x40); @@ -514,43 +504,32 @@ unsigned long long sched_clock(void) static unsigned long get_cmos_time(void) { - unsigned int timeout = 1000000, year, mon, day, hour, min, sec; - unsigned char uip = 0, this = 0; + unsigned int year, mon, day, hour, min, sec; unsigned long flags; - -/* - * The Linux interpretation of the CMOS clock register contents: When the - * Update-In-Progress (UIP) flag goes from 1 to 0, the RTC registers show the - * second which has precisely just started. Waiting for this can take up to 1 - * second, we timeout approximately after 2.4 seconds on a machine with - * standard 8.3 MHz ISA bus. - */ + unsigned extyear = 0; spin_lock_irqsave(&rtc_lock, flags); - while (timeout && (!uip || this)) { - uip |= this; - this = CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP; - timeout--; - } - - /* - * Here we are safe to assume the registers won't change for a whole - * second, so we just go ahead and read them. - */ - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); + do { + sec = CMOS_READ(RTC_SECONDS); + min = CMOS_READ(RTC_MINUTES); + hour = CMOS_READ(RTC_HOURS); + day = CMOS_READ(RTC_DAY_OF_MONTH); + mon = CMOS_READ(RTC_MONTH); + year = CMOS_READ(RTC_YEAR); +#ifdef CONFIG_ACPI + if (acpi_fadt.revision >= FADT2_REVISION_ID && + acpi_fadt.century) + extyear = CMOS_READ(acpi_fadt.century); +#endif + } while (sec != CMOS_READ(RTC_SECONDS)); spin_unlock_irqrestore(&rtc_lock, flags); /* * We know that x86-64 always uses BCD format, no need to check the * config register. - */ + */ BCD_TO_BIN(sec); BCD_TO_BIN(min); @@ -559,11 +538,17 @@ static unsigned long get_cmos_time(void) BCD_TO_BIN(mon); BCD_TO_BIN(year); - /* - * x86-64 systems only exists since 2002. - * This will work up to Dec 31, 2100 - */ - year += 2000; + if (extyear) { + BCD_TO_BIN(extyear); + year += extyear; + printk(KERN_INFO "Extended CMOS year: %d\n", extyear); + } else { + /* + * x86-64 systems only exists since 2002. + * This will work up to Dec 31, 2100 + */ + year += 2000; + } return mktime(year, mon, day, hour, min, sec); } @@ -606,7 +591,8 @@ static void cpufreq_delayed_get(void) cpufreq_delayed_issched = 1; if (!warned) { warned = 1; - printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n"); + printk(KERN_DEBUG + "Losing some ticks... checking if CPU frequency changed.\n"); } schedule_work(&cpufreq_delayed_get_work); } @@ -629,9 +615,9 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, lpj = &dummy; if (!(freq->flags & CPUFREQ_CONST_LOOPS)) #ifdef CONFIG_SMP - lpj = &cpu_data[freq->cpu].loops_per_jiffy; + lpj = &cpu_data[freq->cpu].loops_per_jiffy; #else - lpj = &boot_cpu_data.loops_per_jiffy; + lpj = &boot_cpu_data.loops_per_jiffy; #endif if (!ref_freq) { @@ -768,9 +754,8 @@ static __init int late_hpet_init(void) int i; hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); - - for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer; - timer++, i++) + timer = &hpet->hpet_timers[2]; + for (i = 2; i < ntimer; timer++, i++) hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT; @@ -927,8 +912,7 @@ void __init time_init(void) -xtime.tv_sec, -xtime.tv_nsec); if (!hpet_init()) - vxtime_hz = (1000000000000000L + hpet_period / 2) / - hpet_period; + vxtime_hz = (1000000000000000L + hpet_period / 2) / hpet_period; else vxtime.hpet_address = 0; diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 28d50dc540e..edaa9fe654d 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -47,8 +47,6 @@ #include <asm/proto.h> #include <asm/nmi.h> -extern struct gate_struct idt_table[256]; - asmlinkage void divide_error(void); asmlinkage void debug(void); asmlinkage void nmi(void); @@ -71,18 +69,20 @@ asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); -struct notifier_block *die_chain; -static DEFINE_SPINLOCK(die_notifier_lock); +ATOMIC_NOTIFIER_HEAD(die_chain); int register_die_notifier(struct notifier_block *nb) { - int err = 0; - unsigned long flags; - spin_lock_irqsave(&die_notifier_lock, flags); - err = notifier_chain_register(&die_chain, nb); - spin_unlock_irqrestore(&die_notifier_lock, flags); - return err; + vmalloc_sync_all(); + return atomic_notifier_chain_register(&die_chain, nb); +} +EXPORT_SYMBOL(register_die_notifier); + +int unregister_die_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&die_chain, nb); } +EXPORT_SYMBOL(unregister_die_notifier); static inline void conditional_sti(struct pt_regs *regs) { @@ -122,7 +122,7 @@ int printk_address(unsigned long address) if (!modname) modname = delim = ""; return printk("<%016lx>{%s%s%s%s%+ld}", - address,delim,modname,delim,symname,offset); + address, delim, modname, delim, symname, offset); } #else int printk_address(unsigned long address) @@ -334,13 +334,12 @@ void show_registers(struct pt_regs *regs) show_stack(NULL, (unsigned long*)rsp); printk("\nCode: "); - if(regs->rip < PAGE_OFFSET) + if (regs->rip < PAGE_OFFSET) goto bad; - for(i=0;i<20;i++) - { + for (i=0; i<20; i++) { unsigned char c; - if(__get_user(c, &((unsigned char*)regs->rip)[i])) { + if (__get_user(c, &((unsigned char*)regs->rip)[i])) { bad: printk(" Bad RIP value."); break; @@ -479,7 +478,7 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, printk(KERN_INFO "%s[%d] trap %s rip:%lx rsp:%lx error:%lx\n", tsk->comm, tsk->pid, str, - regs->rip,regs->rsp,error_code); + regs->rip, regs->rsp, error_code); if (info) force_sig_info(signr, info, tsk); @@ -493,9 +492,9 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, { const struct exception_table_entry *fixup; fixup = search_exception_tables(regs->rip); - if (fixup) { + if (fixup) regs->rip = fixup->fixup; - } else + else die(str, regs, error_code); return; } @@ -568,7 +567,7 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, printk(KERN_INFO "%s[%d] general protection rip:%lx rsp:%lx error:%lx\n", tsk->comm, tsk->pid, - regs->rip,regs->rsp,error_code); + regs->rip, regs->rsp, error_code); force_sig(SIGSEGV, tsk); return; diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 74db0062d4a..39ff0708f80 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -20,6 +20,12 @@ SECTIONS phys_startup_64 = startup_64 - LOAD_OFFSET; _text = .; /* Text and read-only data */ .text : AT(ADDR(.text) - LOAD_OFFSET) { + /* First the code that has to be first for bootstrapping */ + *(.bootstrap.text) + /* Then all the functions that are "hot" in profiles, to group them + onto the same hugetlb entry */ + #include "functionlist" + /* Then the rest */ *(.text) SCHED_TEXT LOCK_TEXT diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index c9dc7e46731..d96a9348e5a 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -144,16 +144,12 @@ EXPORT_SYMBOL(rwsem_down_write_failed_thunk); EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(die_chain); -EXPORT_SYMBOL(register_die_notifier); #ifdef CONFIG_SMP EXPORT_SYMBOL(cpu_sibling_map); EXPORT_SYMBOL(smp_num_siblings); #endif -extern void do_softirq_thunk(void); -EXPORT_SYMBOL(do_softirq_thunk); - #ifdef CONFIG_BUG EXPORT_SYMBOL(out_of_line_bug); #endif diff --git a/arch/x86_64/lib/thunk.S b/arch/x86_64/lib/thunk.S index acc1e2ca7ed..e49af0032e9 100644 --- a/arch/x86_64/lib/thunk.S +++ b/arch/x86_64/lib/thunk.S @@ -42,7 +42,6 @@ thunk rwsem_wake_thunk,rwsem_wake thunk rwsem_downgrade_thunk,rwsem_downgrade_wake #endif - thunk do_softirq_thunk,do_softirq thunk __down_failed,__down thunk_retrax __down_failed_interruptible,__down_interruptible diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 2e7c3c8ffe0..316c53de47b 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -264,6 +264,8 @@ static int vmalloc_fault(unsigned long address) return -1; if (pgd_none(*pgd)) set_pgd(pgd, *pgd_ref); + else + BUG_ON(pgd_page(*pgd) != pgd_page(*pgd_ref)); /* Below here mismatches are bugs because these lower tables are shared */ @@ -312,21 +314,13 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long flags; siginfo_t info; + tsk = current; + mm = tsk->mm; + prefetchw(&mm->mmap_sem); + /* get the address */ __asm__("movq %%cr2,%0":"=r" (address)); - if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) - return; - - if (likely(regs->eflags & X86_EFLAGS_IF)) - local_irq_enable(); - if (unlikely(page_fault_trace)) - printk("pagefault rip:%lx rsp:%lx cs:%lu ss:%lu address %lx error %lx\n", - regs->rip,regs->rsp,regs->cs,regs->ss,address,error_code); - - tsk = current; - mm = tsk->mm; info.si_code = SEGV_MAPERR; @@ -351,10 +345,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, */ if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) && ((address >= VMALLOC_START && address < VMALLOC_END))) { - if (vmalloc_fault(address) < 0) - goto bad_area_nosemaphore; - return; + if (vmalloc_fault(address) >= 0) + return; } + if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, + SIGSEGV) == NOTIFY_STOP) + return; /* * Don't take the mm semaphore here. If we fixup a prefetch * fault we could otherwise deadlock. @@ -362,6 +358,17 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } + if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, + SIGSEGV) == NOTIFY_STOP) + return; + + if (likely(regs->eflags & X86_EFLAGS_IF)) + local_irq_enable(); + + if (unlikely(page_fault_trace)) + printk("pagefault rip:%lx rsp:%lx cs:%lu ss:%lu address %lx error %lx\n", + regs->rip,regs->rsp,regs->cs,regs->ss,address,error_code); + if (unlikely(error_code & PF_RSVD)) pgtable_bad(address, regs, error_code); @@ -571,6 +578,48 @@ do_sigbus: return; } +DEFINE_SPINLOCK(pgd_lock); +struct page *pgd_list; + +void vmalloc_sync_all(void) +{ + /* Note that races in the updates of insync and start aren't + problematic: + insync can only get set bits added, and updates to start are only + improving performance (without affecting correctness if undone). */ + static DECLARE_BITMAP(insync, PTRS_PER_PGD); + static unsigned long start = VMALLOC_START & PGDIR_MASK; + unsigned long address; + + for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) { + if (!test_bit(pgd_index(address), insync)) { + const pgd_t *pgd_ref = pgd_offset_k(address); + struct page *page; + + if (pgd_none(*pgd_ref)) + continue; + spin_lock(&pgd_lock); + for (page = pgd_list; page; + page = (struct page *)page->index) { + pgd_t *pgd; + pgd = (pgd_t *)page_address(page) + pgd_index(address); + if (pgd_none(*pgd)) + set_pgd(pgd, *pgd_ref); + else + BUG_ON(pgd_page(*pgd) != pgd_page(*pgd_ref)); + } + spin_unlock(&pgd_lock); + set_bit(pgd_index(address), insync); + } + if (address == start) + start = address + PGDIR_SIZE; + } + /* Check that there is no need to do the same for the modules area. */ + BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); + BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == + (__START_KERNEL & PGDIR_MASK))); +} + static int __init enable_pagefaulttrace(char *str) { page_fault_trace = 1; diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 40ed13d263c..e5f7f1c3446 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -72,7 +72,7 @@ void show_mem(void) show_free_areas(); printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; ++i) { page = pfn_to_page(pgdat->node_start_pfn + i); total++; @@ -94,7 +94,7 @@ void show_mem(void) int after_bootmem; -static void *spp_getpage(void) +static __init void *spp_getpage(void) { void *ptr; if (after_bootmem) @@ -108,7 +108,7 @@ static void *spp_getpage(void) return ptr; } -static void set_pte_phys(unsigned long vaddr, +static __init void set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot) { pgd_t *pgd; @@ -157,7 +157,8 @@ static void set_pte_phys(unsigned long vaddr, } /* NOTE: this is meant to be run only at boot */ -void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t prot) +void __init +__set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t prot) { unsigned long address = __fix_to_virt(idx); @@ -225,6 +226,33 @@ static __meminit void unmap_low_page(int i) ti->allocated = 0; } +/* Must run before zap_low_mappings */ +__init void *early_ioremap(unsigned long addr, unsigned long size) +{ + unsigned long map = round_down(addr, LARGE_PAGE_SIZE); + + /* actually usually some more */ + if (size >= LARGE_PAGE_SIZE) { + printk("SMBIOS area too long %lu\n", size); + return NULL; + } + set_pmd(temp_mappings[0].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE)); + map += LARGE_PAGE_SIZE; + set_pmd(temp_mappings[1].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE)); + __flush_tlb(); + return temp_mappings[0].address + (addr & (LARGE_PAGE_SIZE-1)); +} + +/* To avoid virtual aliases later */ +__init void early_iounmap(void *addr, unsigned long size) +{ + if ((void *)round_down((unsigned long)addr, LARGE_PAGE_SIZE) != temp_mappings[0].address) + printk("early_iounmap: bad address %p\n", addr); + set_pmd(temp_mappings[0].pmd, __pmd(0)); + set_pmd(temp_mappings[1].pmd, __pmd(0)); + __flush_tlb(); +} + static void __meminit phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end) { @@ -344,7 +372,7 @@ void __meminit init_memory_mapping(unsigned long start, unsigned long end) pud_t *pud; if (after_bootmem) - pud = pud_offset_k(pgd, __PAGE_OFFSET); + pud = pud_offset_k(pgd, start & PGDIR_MASK); else pud = alloc_low_page(&map, &pud_phys); diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c index dd60e71fdba..7c45c2d2b8b 100644 --- a/arch/x86_64/mm/k8topology.c +++ b/arch/x86_64/mm/k8topology.c @@ -43,7 +43,7 @@ static __init int find_northbridge(void) int __init k8_scan_nodes(unsigned long start, unsigned long end) { unsigned long prevbase; - struct node nodes[8]; + struct bootnode nodes[8]; int nodeid, i, nb; unsigned char nodeids[8]; int found = 0; diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 22e51beee8d..4be82d6e2b4 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -25,8 +25,7 @@ struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; bootmem_data_t plat_node_bdata[MAX_NUMNODES]; -int memnode_shift; -u8 memnodemap[NODEMAPSIZE]; +struct memnode memnode; unsigned char cpu_to_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = NUMA_NO_NODE @@ -47,7 +46,7 @@ int numa_off __initdata; * -1 if node overlap or lost ram (shift too big) */ static int __init -populate_memnodemap(const struct node *nodes, int numnodes, int shift) +populate_memnodemap(const struct bootnode *nodes, int numnodes, int shift) { int i; int res = -1; @@ -74,7 +73,7 @@ populate_memnodemap(const struct node *nodes, int numnodes, int shift) return res; } -int __init compute_hash_shift(struct node *nodes, int numnodes) +int __init compute_hash_shift(struct bootnode *nodes, int numnodes) { int shift = 20; @@ -149,7 +148,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en /* Initialize final allocator for a zone */ void __init setup_node_zones(int nodeid) { - unsigned long start_pfn, end_pfn; + unsigned long start_pfn, end_pfn, memmapsize, limit; unsigned long zones[MAX_NR_ZONES]; unsigned long holes[MAX_NR_ZONES]; @@ -159,6 +158,16 @@ void __init setup_node_zones(int nodeid) Dprintk(KERN_INFO "Setting up node %d %lx-%lx\n", nodeid, start_pfn, end_pfn); + /* Try to allocate mem_map at end to not fill up precious <4GB + memory. */ + memmapsize = sizeof(struct page) * (end_pfn-start_pfn); + limit = end_pfn << PAGE_SHIFT; + NODE_DATA(nodeid)->node_mem_map = + __alloc_bootmem_core(NODE_DATA(nodeid)->bdata, + memmapsize, SMP_CACHE_BYTES, + round_down(limit - memmapsize, PAGE_SIZE), + limit); + size_zones(zones, holes, start_pfn, end_pfn); free_area_init_node(nodeid, NODE_DATA(nodeid), zones, start_pfn, holes); @@ -191,7 +200,7 @@ int numa_fake __initdata = 0; static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn) { int i; - struct node nodes[MAX_NUMNODES]; + struct bootnode nodes[MAX_NUMNODES]; unsigned long sz = ((end_pfn - start_pfn)<<PAGE_SHIFT) / numa_fake; /* Kludge needed for the hash function */ @@ -357,8 +366,7 @@ void __init init_cpu_to_node(void) EXPORT_SYMBOL(cpu_to_node); EXPORT_SYMBOL(node_to_cpumask); -EXPORT_SYMBOL(memnode_shift); -EXPORT_SYMBOL(memnodemap); +EXPORT_SYMBOL(memnode); EXPORT_SYMBOL(node_data); #ifdef CONFIG_DISCONTIGMEM @@ -369,21 +377,6 @@ EXPORT_SYMBOL(node_data); * Should do that. */ -/* Requires pfn_valid(pfn) to be true */ -struct page *pfn_to_page(unsigned long pfn) -{ - int nid = phys_to_nid(((unsigned long)(pfn)) << PAGE_SHIFT); - return (pfn - node_start_pfn(nid)) + NODE_DATA(nid)->node_mem_map; -} -EXPORT_SYMBOL(pfn_to_page); - -unsigned long page_to_pfn(struct page *page) -{ - return (long)(((page) - page_zone(page)->zone_mem_map) + - page_zone(page)->zone_start_pfn); -} -EXPORT_SYMBOL(page_to_pfn); - int pfn_valid(unsigned long pfn) { unsigned nid; diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 482c2576736..2eb879590dc 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -23,7 +23,7 @@ static struct acpi_table_slit *acpi_slit; static nodemask_t nodes_parsed __initdata; static nodemask_t nodes_found __initdata; -static struct node nodes[MAX_NUMNODES] __initdata; +static struct bootnode nodes[MAX_NUMNODES] __initdata; static u8 pxm2node[256] = { [0 ... 255] = 0xff }; /* Too small nodes confuse the VM badly. Usually they result @@ -57,7 +57,7 @@ static __init int conflicting_nodes(unsigned long start, unsigned long end) { int i; for_each_node_mask(i, nodes_parsed) { - struct node *nd = &nodes[i]; + struct bootnode *nd = &nodes[i]; if (nd->start == nd->end) continue; if (nd->end > start && nd->start < end) @@ -70,7 +70,7 @@ static __init int conflicting_nodes(unsigned long start, unsigned long end) static __init void cutoff_node(int i, unsigned long start, unsigned long end) { - struct node *nd = &nodes[i]; + struct bootnode *nd = &nodes[i]; if (nd->start < start) { nd->start = start; if (nd->end < nd->start) @@ -159,7 +159,7 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) void __init acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) { - struct node *nd; + struct bootnode *nd; unsigned long start, end; int node, pxm; int i; diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index e90ef5db891..dbeb3504c3c 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -22,6 +22,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_HARDIRQS bool default y diff --git a/arch/xtensa/platform-iss/setup.c b/arch/xtensa/platform-iss/setup.c index 2e6dcbf0cc0..23790a5610e 100644 --- a/arch/xtensa/platform-iss/setup.c +++ b/arch/xtensa/platform-iss/setup.c @@ -108,5 +108,5 @@ static struct notifier_block iss_panic_block = { void __init platform_setup(char **p_cmdline) { - notifier_chain_register(&panic_notifier_list, &iss_panic_block); + atomic_notifier_chain_register(&panic_notifier_list, &iss_panic_block); } |